Jim Fehlig [Tue, 20 Feb 2018 23:51:27 +0000 (16:51 -0700)]
libxl: add support for specifying clock offset and adjustment
libxl supports setting the domain real time clock to local time or
UTC via the localtime field of libxl_domain_build_info. Adjustment
of the clock is also supported via the rtc_timeoffset field. The
libvirt libxl driver has never supported these settings, instead
relying on libxl's default of a UTC real time clock with adjustment
set to 0.
There is at least one user that would like the ability to change
the defaults
Add support for specifying a local time clock and for specifying an
adjustment for both local time and UTC clocks. Add a test case to
verify the XML to libxl_domain_config conversion.
Local time clock and clock adjustment is already supported by the
XML <-> xl.cfg converter. What is missing is an explicit test for
the conversion. There are plenty of existing tests that all use UTC
with 0 adjustment. Hijack test-fullvirt-tsc-timer to test a local
time clock with 1 hour adjustment.
Signed-off-by: Jim Fehlig <jfehlig@suse.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
m4: enforce that all enum cases are listed in switch statements
As a general rule any time we switch() on something that is an enum, we
want to have a case for every enum constant. The -Wswitch warning will
report any switch where we've violated this rule, except if that switch
has a default case.
Unfortunately it is reasonable to want to list all enum constants *and*
also have a default case. To get a warning in that scenario requires
that we turn on -Wswitch-enum.
In a few cases where we explicitly don't want to list all enum cases, we
can discard the enum type checking by casting the value to a plain int.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
src: remove WITH_LIBVIRTD condition around hal/udev build
Currently building --without-libvirtd causes a failure to link the node
device driver:
node_device/.libs/libvirt_driver_nodedev_la-node_device_driver.o: In function `nodedevRegister':
/home/berrange/src/virt/libvirt/src/node_device/node_device_driver.c:649: undefined reference to `udevNodeRegister'
collect2: error: ld returned 1 exit status
because it causes us to build the core nodedev driver, but then skip the
implementations, despite udev being available.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
These two objects are used to access fields in actual ethernet packets
captures with libpcap, so it's essential that they don't change size
for any reason. This patch uses gnulib's verify() macro to make sure
their sizes don't change.
Signed-off-by: Laine Stump <laine@laine.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Fix build with GCC 8 new switch fallthrough warnings
GCC 8 became more fussy about detecting switch
fallthroughs. First it doesn't like it if you have
a fallthrough attribute that is not before a case
statement. e.g.
FOO:
BAR:
WIZZ:
ATTRIBUTE_FALLTHROUGH;
Is unacceptable as there's no final case statement,
so while FOO & BAR are falling through, WIZZ is
not falling through. IOW, GCC wants us to write
FOO:
BAR:
ATTRIBUTE_FALLTHROUGH;
WIZZ:
Second, it will report risk of fallthrough even if you
have a case statement for every single enum value, but
only if the switch is nested inside another switch and
the outer case statement has no final break. This is
is arguably valid because despite the fact that we have
cast from "int" to the enum typedef, nothing guarantees
that the variable we're switching on only contains values
that have corresponding switch labels. e.g.
int domstate = 87539319;
switch ((virDomainState)domstate) {
...
}
will not match enum value, but also not raise any kind
of compiler warning. So it is right to complain about
risk of fallthrough if no default: is present.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: add enum constants for default controller models
The controller model is slightly unusual in that the default value is
-1, not 0. As a result the default value is not covered by any of the
existing enum cases. This in turn means that any switch() statements
that think they have covered all cases, will in fact not match the
default value at all. In the qemuDomainDeviceCalculatePCIConnectFlags()
method this has caused a serious mistake where we fallthrough from the
SCSI controller case, to the VirtioSerial controller case, and from
the USB controller case to the IDE controller case.
By adding explicit enum constant starting at -1, we can ensure switches
remember to handle the default case.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Andrea Bolognani [Mon, 12 Feb 2018 17:55:04 +0000 (18:55 +0100)]
qemu: Simplify modelName stringification
There's no need to perform checks before conversion, we can just
call virDomainControllerPCIModelNameTypeToString() and check the
results later on.
Since the variables involved are only used for PCI controllers,
we can declare them in the 'case' scope rather than in the
function scope to make everything a bit nicer while at it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Andrea Bolognani [Mon, 12 Feb 2018 17:52:40 +0000 (18:52 +0100)]
qemu: Move skip for implicit PHB of pSeries guests
Performing the skip earlier will help us making the function
nicer later on. We also make the condition for the skip a bit
more precise, though that'a more for self-documenting purposes
and doesn't change anything in practice.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
If formatting of storage encryption or private data fails we must
jump to the error label instead of returning immediately
otherwise @attrBuf and @childBuf might be leaked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
daemon: trigger RPC re-generation when Makefile.am changes
The src/Makefile.am rules all re-generate the RPC dispatch code whenever
the Makefile.am changes, so for consistency do that for
daemon/Makefile.am too.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Andrea Bolognani [Mon, 19 Feb 2018 16:37:17 +0000 (17:37 +0100)]
docs: Document pcie-root requirement for q35 guests
When you add a bunch of pcie-root-port controllers to a q35 guest
in order to have hotplug capabilities, you also need to make sure
you're adding the pcie-root controller at the same time or you
will get an error. Document this fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Laine Stump [Tue, 20 Feb 2018 02:16:20 +0000 (21:16 -0500)]
tests: fix bhyve build
This file was modified in an editor buffer but not saved prior to
commit e62cb4a9b78 (which removed virMacAddr::generated), so the bhyve
build would fail.
Laine Stump [Fri, 16 Feb 2018 17:26:17 +0000 (12:26 -0500)]
conf: move 'generated' member from virMacAddr to virDomainNetDef
Commit 7e62c4cd26d (first appearing in libvirt-3.9.0 as a resolution
to rhbz #1343919) added a "generated" attribute to virMacAddr that was
set whenever a mac address was auto-generated by libvirt. This
knowledge was used in a single place - when trying to match a NetDef
from the Domain to Delete with user-provided XML. Since the XML parser
always auto-generates a MAC address for NetDefs when none is provided,
it was previously impossible to make a search where the MAC address
isn't significant, but the addition of the "generated" attribute made
it possible for the search function to ignore auto-generated MACs.
This implementation had a problem though - it was adding a field to a
"low level" struct - virMacAddr - which is used in other places with
the assumption that it contains exactly a 6 byte MAC address and
nothing else. In particular, virNWFilterSnoopEthHdr uses virMacAddr as
part of the definition of an ethernet packet header, whose layout must
of course match an actual ethernet packet. Adding the extra bools into
virNWFilterSnoopEthHdr caused the nwfilter driver's "IP discovery via
DHCP packet snooping" functionality to mysteriously stop working.
In order to fix that behavior, and prevent potential future similar
odd behavior, this patch moves the "generated" member out of
virMacAddr (so that it is again really is just a MAC address) into
virDomainNetDef, and sets it only when virDomainNetGenerateMAC() is
called from virDomainNetDefParseXML() (which is the only time we care
about it).
qemu: rename migration APIs to include Src or Dst in their name
It is very difficult while reading the migration code trying to
understand whether a particular function is being called on the src side
or the dst side, or either. Putting "Src" or "Dst" in the method names will
make this much more obvious. "Any" is used in a few helpers which can be
called from both sides.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Mon, 19 Feb 2018 08:21:29 +0000 (09:21 +0100)]
qemu: blockcopy: Add check for bandwidth
QEMU code does not work well with too big numbers on the JSON monitor so
our monitor code supports sending only numbers up to LLONG_MAX. Avoid a
weird error message by limiting the size of the 'bandwidth' parameter
for block copy.
Peter Krempa [Mon, 19 Feb 2018 06:19:47 +0000 (07:19 +0100)]
virsh: Fix internal naming of some blockjob commands
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.
qemu: remove virConnectPtr from some more startup code paths
There's a few places in startup code paths which pass around a
virConnectPtr which is no longer required. Specifically, the
qemuProcessStart() method now only requires a non-NULL connection if
autodestroy is requested.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu: stop passing in virConnectPtr for looking up networks
When setting up graphics, we sometimes need to resolve networks,
requiring the caller to pass in a virConnectPtr, except sometimes they
pass in NULL. Use virGetConnectNetwork() to acquire the connection to
the network driver when it is needed.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During domain startup there are many places where we need to acquire
secrets. Currently code passes around a virConnectPtr, except in the
places where we pass in NULL. So there are a few codepaths where ability
to start guests using secrets will fail. Change to acquire a handle to
the secret driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: stop passing virConnectPtr into virDomainDiskTranslateSourcePool
Rather than expecting callers to pass a virConnectPtr into the
virDomainDiskTranslateSourcePool() method, just acquire a connection
to the storage driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu: stop passing virConnectPtr into qemuMonitorStartCPUs
There is a long standing hack to pass a virConnectPtr into the
qemuMonitorStartCPUs method, so that when the text monitor prompts
for a disk password, we can lookup virSecretPtr objects. This causes
us to have to pass a virConnectPtr around through countless methods
up the call chain....except some places don't have any virConnectPtr
available so have always just passed NULL. We can finally fix this
disastrous design by using virGetConnectSecret() to open a connection
to the secret driver at time of use.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: reimplement virDomainNetResolveActualType in terms of public API
Now that we have the ability to easily open connections to secondary
drivers, eg network:///system, it is possible to reimplement the
virDomainNetResolveActualType method in terms of the public API. This
avoids the need to have the network driver provide a callback for it.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
driver: allow override of connection for secondary drivers
When the test suite is running, we don't want to be triggering the
startup of daemons for the secondary drivers. Thus we must provide a way
to set a custom connection for the secondary drivers, to override the
default logic which opens a new connection.
This will also be useful for code where we have a whole set of separate
functions calls all needing the secret driver. Currently the connection
to the secret driver is opened & closed many times in quick
succession. This will allow us to pre-open a connection temporarily,
improving the performance of startup.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Zhuang Yanying [Wed, 14 Feb 2018 09:22:39 +0000 (17:22 +0800)]
qemu: Generate SMBIOS Chassis strings command line
This wires up the previously added Chassis strings XML schema to be able to
generate comamnd line args for QEMU. This requires QEMU >= 2.1 release
containing this patch:
m4: disable gcc8 -Wcast-function-type warnings from -Wextra
The -Wextra flag bundle gained a new warning -Wcast-function-type.
This complains if you cast between two function prototypes where
the number of parameters or their data types are not compatible.
Unfortunately we need such "bad" function casts for our event
callbacks. It is possible to silence the warning by first casting
to the generic "void (*)(void)" function prototype, but that is
rather ugly to add throughout libvirt code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Wed, 14 Feb 2018 14:17:51 +0000 (15:17 +0100)]
virsh: Remove <backingStore> sub-element in virshFindDisk
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.
The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.
Peter Krempa [Wed, 14 Feb 2018 13:12:23 +0000 (14:12 +0100)]
util: storage: Remove detected authentication data for backing chains
We can't really detect all the authentication data in a sane manner for
disk backing chains. Since the old RBD parser parses it in some cases as
the argv->XML convertor requires it, we can't just drop it.
Instead clear any detected authentication data in the code paths related
to disk backing chain lookup and fix the tests to cope with the change.
Peter Krempa [Mon, 12 Feb 2018 14:44:11 +0000 (15:44 +0100)]
storage: Fix formatting and parsing of qemu type 'UnixSocketAddress'
The documentation for the JSON/qapi type 'UnixSocketAddress' states that
the unix socket path field is named 'path'. Unfortunately qemu uses
'socket' in case of the gluster driver (despite documented otherwise).
Add logic which will format the correct fields while keeping support of
the old spelling.
Jiri Denemark [Wed, 14 Feb 2018 12:16:52 +0000 (13:16 +0100)]
spec: Drop overlapping triggers
The postun trigger for libvirt-daemon was defined twice for overlapping
ranges of package verions if systemd support was switched off (which
happens when building on something ancient, such as RHEL-6).
Let's combine the two triggers into the one which is called when
libvirt-daemon < 1.3.0 is uninstalled. As a side effect, virtlockd and
virtlogd might be reloaded twice after an upgrade from libvirt newer
than 1.2.1 and older than 1.3.0 (by postun script from the old libvirt
and postun trigger from the new libvirt).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Jiri Denemark [Wed, 14 Feb 2018 13:49:28 +0000 (14:49 +0100)]
spec: Build virt-login-shell iff LXC driver is enabled
Building virt-login-shell doesn't really make any sense without LXC and
doing so even breaks "make rpm" since the associated files are installed
but unpackaged (the login-shell sub package already depends on LXC).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We're already checking if IPv4 prefix isn't too long. But we are
not checking if it isn't too short. QEMU supports prefixes longer
than 4 (including). I haven't find anything similar related to
IPv6 in qemu sources.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Bjoern Walk [Thu, 8 Feb 2018 12:38:25 +0000 (13:38 +0100)]
tests: run virshtest independent of current pwd
virshtest execves the virsh binary. Make sure that it finds the binary's
location independent of the current working directory by specifying the
absolute path as determined by the build environment.
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com> Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
When no GIC version is specified, we currently default to GIC v2;
however, that's not a great default, since guests will fail to
start if the hardware only supports GIC v3.
Change the behavior so that a sensible default is chosen instead.
That basically means using the same algorithm whether the user
didn't explicitly enable the GIC feature or they explicitly
enabled it but didn't specify any GIC version.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Account for the fact that the default might change based on what
GIC versions are supported by QEMU. That's not the case at the
moment, but it will be soon.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
conf: Integrate all features ABI checks in the switch
There are a few stray checks which still live outside of the
switch in virDomainDefFeaturesCheckABIStability() for no good
reason. Move them inside the switch, and update the error
messages to be consistent while at it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Unlike most other features, VIR_DOMAIN_FEATURE_CAPABILITIES is
of type virDomainCapabilitiesPolicy instead of virTristateSwitch,
so we need to handle it separately for the error message to make
sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
qemu: Move feature verification from PostParse() to Validate()
We want to perform all feature verification in a single spot, but
some of it (eg. GIC) is currently being performed at command line
generation time, and moving it to PostParse() would cause guests
to disappear. Moving verification to Validate() allows us to
side-step the issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
On reflection adding defaults for arbitrary guest XML device config
settings to the qemu.conf is not a sustainable path. Removing the
support for rx/tx queue size so that it doesn't set a bad precedent.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
John Ferlan [Fri, 9 Feb 2018 13:52:10 +0000 (08:52 -0500)]
qemu: Alter condition to avoid possible NULL deref
Commit 'f0f2a5ec2' neglected to adjust the if condition to split
out the possibility that the @watchdog is NULL when altering the
message to add detail about the model.
Just split out the condition and use previous/original message, but
with the new message code.
The fix for CVE-2018-6764 introduced a potential deadlock scenario
that gets triggered by the NSS module when virGetHostname() calls
getaddrinfo to resolve the hostname:
#0 0x00007f6e714b57e7 in futex_wait
#1 futex_wait_simple
#2 __pthread_once_slow
#3 0x00007f6e71d16e7d in virOnce
#4 0x00007f6e71d0997c in virLogInitialize
#5 0x00007f6e71d0a09a in virLogVMessage
#6 0x00007f6e71d09ffd in virLogMessage
#7 0x00007f6e71d0db22 in virObjectNew
#8 0x00007f6e71d0dbf1 in virObjectLockableNew
#9 0x00007f6e71d0d3e5 in virMacMapNew
#10 0x00007f6e71cdc50a in findLease
#11 0x00007f6e71cdcc56 in _nss_libvirt_gethostbyname4_r
#12 0x00007f6e724631fc in gaih_inet
#13 0x00007f6e72464697 in __GI_getaddrinfo
#14 0x00007f6e71d19e81 in virGetHostnameImpl
#15 0x00007f6e71d1a057 in virGetHostnameQuiet
#16 0x00007f6e71d09936 in virLogOnceInit
#17 0x00007f6e71d09952 in virLogOnce
#18 0x00007f6e714b5829 in __pthread_once_slow
#19 0x00007f6e71d16e7d in virOnce
#20 0x00007f6e71d0997c in virLogInitialize
#21 0x00007f6e71d0a09a in virLogVMessage
#22 0x00007f6e71d09ffd in virLogMessage
#23 0x00007f6e71d0db22 in virObjectNew
#24 0x00007f6e71d0dbf1 in virObjectLockableNew
#25 0x00007f6e71d0d3e5 in virMacMapNew
#26 0x00007f6e71cdc50a in findLease
#27 0x00007f6e71cdc839 in _nss_libvirt_gethostbyname3_r
#28 0x00007f6e71cdc724 in _nss_libvirt_gethostbyname2_r
#29 0x00007f6e7248f72f in __gethostbyname2_r
#30 0x00007f6e7248f494 in gethostbyname2
#31 0x000056348c30c36d in hosts_keys
#32 0x000056348c30b7d2 in main
Fortunately the extra stuff virGetHostname does is totally irrelevant to
the needs of the logging code, so we can just inline a call to the
native hostname() syscall directly.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
rpc: export xdr_virNetMessageError for virnetmessagetest on Win32
The Win32 symbol export file format can't do wildcards, so none of
the 'xdr_*' symbols are exported from the libvirt DLL. This doesn't
matter generally since the RPC client is built into the DLL and we
don't build libvirtd on Win32. The virnetmessagetest, however, does
require xdr_virNetMessageError to be exported, so just do a hack for
that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
docs: document requirement to provide Signed-off-by lines for DCO
Document that contributors are required to assert compliance with the
Developers Certification of Origin 1.1, by providing Signed-off-by tags
for all commit messages. The DCO is formally stating what we have long
implicitly expected of contributors in terms of their legal rights to
make the contribution. This puts the project in a stronger position
should any questions around contributions be raised going forward in the
future.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
cfg: forbid includes of headers in network and storage drivers again
Loadable drivers must never depend on each other. Over time some usage
mistakenly crept in for the storage and network drivers, but now this is
eliminated the syntax-check rules can enforce this separation once more.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
build: passing the "-z defs" linker flag to prevent undefined symbols
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.
The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
build: explicitly link all modules with libvirt.so
The dlopened modules we currently build all use various symbols from
libvirt.so, but don't actually link to it. They rely on the libvirtd
daemon re-exporting the libvirt.so symbols. This means that at the
time the modules are linked, they contain a huge number of undefined
symbols. It also means that these undefined symbols are not versioned,
so despite us providing a LIBVIRT_PRIVATE_XXXX version that
intentionally changes on every release, the loadable modules could
actually be loaded into any libvirtd regardless of version.
This change explicitly links all modules against libvirt.so so
that they don't rely on the re-export behave and can be fully resolved
at build time. This will give us a stronger guarantee modules will
actually be loadable at runtime and that we're using modules from the
matched build.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
storage: export virStoragePoolLookupByTargetPath as a public API
The storagePoolLookupByTargetPath() method in the storage driver is used
by the QEMU driver during block migration. If there's a valid use case
for this in the QEMU driver, then external apps likely have similar
needs. Exposing it in the public API removes the direct dependancy from
the QEMU driver to the storage driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: move virStorageTranslateDiskSourcePool into domain conf
The virStorageTranslateDiskSourcePool method modifies a virDomainDiskDef
to resolve any storage pool reference. For some reason this was added
into the storage driver code, despite working entirely in terms of the
public APIs. Move it into the domain conf file and rename it to match the
object it modifies.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The networkDnsmasqConfContents() method is only used by the test suite
and that's only built with WITH_NETWORK is set. So there is no longer
any reason to conditionalize the declaration of this method.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
projects / libvirt.git / log