David Woodhouse [Wed, 1 May 2019 10:37:09 +0000 (13:37 +0300)]
x86/boot: Do not use trampoline for no-real-mode boot paths
Where booted from EFI or with no-real-mode, there is no need to stomp
on low memory with the 16-boot code. Instead, just go straight to
trampoline_protmode_entry() at its physical location within the Xen
image.
For now, the boot code (including the EFI loader path) still determines
what the trampoline_phys address should be. The trampoline is actually
relocated for that address and copied into low memory, from a
relocate_trampoline() call made from __start_xen().
For subsequent AP startup and wakeup, the 32-bit trampoline can't
trivially be used in-place as that region isn't mapped. So copy it
down to low memory too, having relocated it (again) to work from
there.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Tue, 30 Apr 2019 15:54:19 +0000 (18:54 +0300)]
x86/boot: Copy 16-bit boot variables back up to Xen image
Ditch the bootsym() access from C code for the variables populated by
16-bit boot code. As well as being cleaner this also paves the way for
not having the 16-bit boot code in low memory for no-real-mode or EFI
loader boots at all.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Tue, 30 Apr 2019 13:27:13 +0000 (16:27 +0300)]
x86/boot: Rename trampoline_{start,end} to boot_trampoline_{start,end}
In preparation for splitting the boot and permanent trampolines from
each other. Some of these will change back, but most are boot so do the
plain search/replace that way first, then a subsequent patch will extract
the permanent trampoline code.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Sun, 28 Apr 2019 14:48:22 +0000 (17:48 +0300)]
x86/boot: Split bootsym() into four types of relocations
As a first step toward using the low-memory trampoline only when necessary
for a legacy boot without no-real-mode, clean up the relocations into
three separate groups.
• bootsym() is now used only at boot time when no-real-mode isn't set.
• bootdatasym() is for variables containing information discovered by
the 16-bit boot code. This is currently accessed directly in place
in low memory by Xen at runtime, but will be copied back to its
location in high memory to avoid the pointer gymnastics (and because
a subsequent patch will stop copying the 16-bit boot code into low
memory at all when it isn't being used).
• trampsym() is for the permanent 16-bit trampoline used for AP startup
and for wake from sleep. This is not used at boot, and can be copied
into (properly allocated) low memory once the system is running.
• tramp32sym() is used both at boot and for AP startup/wakeup. During
boot it can be used in-place, running from the physical address of
the Xen image. For AP startup it can't, because at that point there
isn't a full 1:1 mapping of all memory; only the low trampoline page
is mapped.
No (intentional) functional change yet; just a "cleanup" to allow the
various parts to be treated separately in subsequent patches.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
David Woodhouse [Sun, 28 Apr 2019 14:13:37 +0000 (17:13 +0300)]
x86/wakeup: Stop using %fs for lidt/lgdt
The wakeup code is now relocated alongside the trampoline code, so
as long as we move idt_48 and gdt_48 up a little bit so that they're
visible in the real-mode segment that the wakeup code runs in, using
%ds is just fine here.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Thus the loop termination condition is dereferencing a struct pointer that
is being incremented by the loop.
A block of MSI entries stores the number of vectors in entry[0].msi.nvec,
with all subsequent entries using a value of 0. Therefore, for a block of
two or more MSIs will terminate the loop early, as entry[1].msi.nvec is 0.
However, for a single MSI, ++entry moves the pointer out of bounds, and a
bogus read is used for the termination condition. In the case that the
loop body gets entered, there are subsequent OoB writes which clobber
adjacent memory in the heap.
This patch simply initializes a stack variable to the value of
entry->msi.nvec before starting the loop and then uses that in the
termination condition instead.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 56ad626532eb7addeef2bb2f5f67a15756b5cee2
master date: 2019-07-02 12:00:42 +0100
Igor Druzhinin [Fri, 5 Jul 2019 08:33:27 +0000 (10:33 +0200)]
x86/cpuid: leak OSXSAVE only when XSAVE is not clear in policy
This fixes booting of old non-PV-OPS kernels which historically
looked for OSXSAVE instead of XSAVE bit in CPUID to check whether
XSAVE feature is enabled. If such a guest appears to be started on
an XSAVE enabled CPU and the feature is explicitly cleared in
policy, leaked OSXSAVE bit from Xen will lead to guest crash early in
boot.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 902888922e6feda2c485cc4bdeffd0d6e6c26e14
master date: 2019-06-28 13:17:53 +0100
Jan Beulich [Fri, 5 Jul 2019 08:32:41 +0000 (10:32 +0200)]
x86/SMP: don't try to stop already stopped CPUs
In particular with an enabled IOMMU (but not really limited to this
case), trying to invoke fixup_irqs() after having already done
disable_IO_APIC() -> clear_IO_APIC() is a rather bad idea:
Don't call fixup_irqs() and don't send any IPI if there's only one
online CPU anyway, and don't call __stop_this_cpu() at all when the CPU
we're on was already marked offline (by a prior invocation of
__stop_this_cpu()).
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Extend this to the kexec/crash path as well.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 6ff560f7f1f214fb89baaf97812c4c943e44a642
master date: 2019-06-18 16:35:35 +0200
Jan Beulich [Fri, 5 Jul 2019 08:32:03 +0000 (10:32 +0200)]
x86/AMD: limit C1E disable family range
Just like for other family values of 0x17 (see "x86/AMD: correct certain
Fam17 checks"), commit 3157bb4e13 ("Add MSR support for various feature
AMD processor families") made the original check for Fam11 here include
families all the way up to Fam17. The involved MSR (0xC0010055),
however, is fully reserved starting from Fam16, and the two bits of
interest are reserved for Fam12 and onwards (albeit I admit I wasn't
able to find any Fam13 doc). Restore the upper bound to be Fam11.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 5c2926f576c9127a8d47217e0cafe00cc741c452
master date: 2019-06-18 16:34:51 +0200
Jan Beulich [Fri, 5 Jul 2019 08:31:26 +0000 (10:31 +0200)]
x86/AMD: correct certain Fam17 checks
Commit 3157bb4e13 ("Add MSR support for various feature AMD processor
families") converted certain checks for Fam11 to include families all
the way up to Fam17. The commit having no description, it is hard to
tell whether this was a mechanical dec->hex conversion mistake, or
indeed intended. In any event the NB_CFG handling needs to be restricted
to Fam16 and below: Fam17 doesn't really have such an MSR anymore. As
per observation it's read-zero / write-discard now, so make PV uniformly
(with the exception of pinned Dom0 vCPU-s) behave so, just like HVM
already does.
Mirror the NB_CFG behavior to MSR_FAM10H_MMIO_CONF_BASE as well, except
that here the vendor/model check is kept in place (for now at least).
A non-MMCFG extended config space access mechanism still appears to
exist, but code to deal with it will need to be written down the road,
when it can actually be tested.
Reported-by: Pu Wen <puwen@hygon.cn> Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: e0fbf3bf9871b00fa526c4ed893604e7ad6c3090
master date: 2019-06-18 16:33:53 +0200
Andrew Cooper [Fri, 5 Jul 2019 08:29:48 +0000 (10:29 +0200)]
x86/spec-ctrl: Knights Landing/Mill are retpoline-safe
They are both Airmont-based and should have been included in c/s 17f74242ccf
"x86/spec-ctrl: Extend repoline safey calcuations for eIBRS and Atom parts".
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: e2105180f99d22aad47ee57113015e11d7397e54
master date: 2019-05-31 19:11:29 +0100
Paul Durrant [Fri, 5 Jul 2019 08:29:12 +0000 (10:29 +0200)]
x86/vhpet: avoid 'small' time diff test on resume
It appears that even 64-bit versions of Windows 10, when not using syth-
etic timers, will use 32-bit HPET non-periodic timers. There is a test
in hpet_set_timer(), specific to 32-bit timers, that tries to disambiguate
between a comparator value that is in the past and one that is sufficiently
far in the future that it wraps. This is done by assuming that the delta
between the main counter and comparator will be 'small' [1], if the
comparator value is in the past. Unfortunately, more often than not, this
is not the case if the timer is being re-started after a migrate and so
the timer is set to fire far in the future (in excess of a minute in
several observed cases) rather then set to fire immediately. This has a
rather odd symptom where the guest console is alive enough to be able to
deal with mouse pointer re-rendering, but any keyboard activity or mouse
clicks yield no response.
This patch simply adds an extra check of 'creation_finished' into
hpet_set_timer() so that the 'small' time test is omitted when the function
is called to restart timers after migration, and thus any negative delta
causes a timer to fire immediately.
[1] The number of ticks that equate to 0.9765625 milliseconds
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: b144cf45d50b603c2909fc32c6abf7359f86f1aa
master date: 2019-05-31 11:40:52 +0200
Julien Grall [Thu, 20 Jun 2019 17:47:06 +0000 (18:47 +0100)]
xen/arm: time: cycles_t should be an uint64_t and not unsigned long
Since commit ca73ac8e7d "xen/arm: Add an isb() before reading CNTPCT_EL0
to prevent re-ordering", get_cycles() is now returning the number of
cycles and used in more callers.
While the counter registers is always 64-bit, get_cycles() will only
reutrn a 32-bit on Arm32 and therefore truncate the value. This will
result to weird behavior by both Xen and the Guest as the timer will not
be setup correctly.
This could be resolved by switch cycles_t from unsigned long to
unsigned int.
Jan Beulich [Tue, 18 Jun 2019 14:05:31 +0000 (16:05 +0200)]
XSM: adjust Kconfig names
Since the Kconfig option renaming was not backported, the new uses of
involved CONFIG_* settings should have been adopted to the existing
names in the XSA-295 series. Do this now, also changing XSM_SILO to just
SILO to better match its FLASK counterpart.
To avoid breaking the Kconfig menu structure also adjust XSM_POLICY's
dependency (as was also silently done on master during the renaming).
xen/arm: grant-table: Protect gnttab_clear_flag against guest misbehavior
The function gnttab_clear_flag is used to clear the access flags. On
Arm, it is implemented using a loop and guest_cmpxchg.
It is possible that guest_cmpxchg will always return a different value
than old. This can happen if the guest updated the memory before Xen has
time to do the exchange. Because of that, there are no way for to
promise the loop will end.
It is possible to make the current code safe by re-using the same
principle as applied on the guest atomic helper. However this patch
takes a different approach that should lead to more efficient code in
the default case.
A new helper is introduced to clear a set of bits on a 16-bits word.
This should avoid a an extra loop to check cmpxchg succeeded.
Note that a mask is used instead of a bit, so the helper can be re-used
later on for clearing multiple flags at the same time.
This is part of XSA-295.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Julien Grall <julien.grall@arm.com> Signed-off-by: Stefano Stabellini <stefanos@xilinx.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
xen: Use guest atomics helpers when modifying atomically guest memory
On Arm, exclusive load-store atomics should only be used between trusted
thread. As not all the guests are trusted, it may be possible to DoS Xen
when updating shared memory with guest atomically.
This patch replaces all the atomics operations on shared memory with
a guest by the new guest atomics helpers. The x86 code was not audited
to know where guest atomics helpers could be used. I will leave that
to the x86 folks.
Note that some rework was required in order to plumb use the new guest
atomics in event channel and grant-table.
Because guest_test_bit is ignoring the parameter "d" for now, it
means there a lot of places do not need to drop the const. We may want
to revisit this in the future if the parameter "d" becomes necessary.
xen/cmpxchg: Provide helper to safely modify guest memory atomically
On Arm, exclusive load-store atomics should only be used between trusted
thread. As not all the guests are trusted, it may be possible to DoS Xen
when updating shared memory with guest atomically.
This patch adds a new helper that will update the guest memory safely.
For x86, it is already possible to use the current helper safely. So
just wrap it.
For Arm, we will first attempt to update the guest memory with the
loop bounded by a maximum number of iterations. If it fails, we will
pause the domain and try again.
Note that this heuristics assumes that a page can only
be shared between Xen and one domain. Not Xen and multiple domain.
The maximum number of iterations is based on how many times atomic_inc()
can be executed in 1uS. The maximum value is per-CPU to cater big.LITTLE
and calculated when the CPU is booting.
The maximum number of iterations is based on how many times a simple
load-store atomic operation can be executed in 1uS. The maximum
value is per-CPU to cater big.LITTLE and calculated when the CPU is
booting. The heuristic was randomly chosen and can be modified if
impact too much good-behaving guest.
xen/bitops: Provide helpers to safely modify guest memory atomically
On Arm, exclusive load-store atomics should only be used between trusted
thread. As not all the guests are trusted, it may be possible to DoS Xen
when updating shared memory with guest atomically.
This patch adds a new set of helper that will update the guest memory
safely. For x86, it is already possible to use the current helpers
safely. So just wrap them.
For Arm, we will first attempt to update the guest memory with the loop
bounded by a maximum number of iterations. If it fails, we will pause the
domain and try again.
Note that this heuristics assumes that a page can only be shared between
Xen and one domain. Not Xen and multiple domain.
The maximum number of iterations is based on how many times a simple
load-store atomic operation can be executed in 1uS. The maximum value is
per-CPU to cater big.LITTLE and calculated when the CPU is booting. The
heuristic was randomly chosen and can be modified if impact too much
good-behaving guest.
Note, while test_bit does not requires to use atomic operation, a
wrapper for test_bit was added for completeness. In this case, the
domain stays constified to avoid major rework in the caller for the
time-being.
On Arm, exclusive load-store atomics should only be used between trusted
thread. As not all the guests are trusted, it may be possible to DoS Xen
when updating shared memory with guest atomically.
Recent patches introduced new helpers to update shared memory with guest
atomically. Those helpers relies on a memory region to be be shared with
Xen and a single guest.
At the moment, nothing prevent a guest sharing a page with Xen and as
well with another guest (e.g via grant table).
For the scope of the XSA, the quickest way is to deny communications
between unprivileged guest. So this patch is enabling and using SILO
mode by default on Arm.
Users wanted finer graine policy could wrote their own Flask policy.
This is part of XSA-295.
Signed-off-by: Julien Grall <julien.grall@arm.com> Acked-by: Jan Beulich <jbeulich@suse.com>
Xin Li [Tue, 9 Oct 2018 09:33:19 +0000 (17:33 +0800)]
xen/xsm: Introduce new boot parameter xsm
Introduce new boot parameter xsm to choose which xsm module is enabled,
and set default to dummy. And add new option in Kconfig to choose the
default XSM implementation.
Signed-off-by: Xin Li <xin.li@citrix.com> Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Julien Grall [Wed, 22 May 2019 20:39:17 +0000 (13:39 -0700)]
xen/arm: cmpxchg: Provide a new helper that can timeout
Exclusive load-store atomics should only be used between trusted
threads. As not all the guests are trusted, it may be possible to DoS
Xen when updating shared memory with guest atomically.
To prevent the infinite loop, we introduce a new helper that can timeout.
The timeout is based on the maximum number of iterations.
It will be used in follow-up patch to make atomic operations on shared
memory safe.
xen/arm: bitops: Implement a new set of helpers that can timeout
Exclusive load-store atomics should only be used between trusted
threads. As not all the guests are trusted, it may be possible to DoS
Xen when updating shared memory with guest atomically.
To prevent the infinite loop, we introduce a new set of helpers that can
timeout. The timeout is based on the maximum number of iterations.
They will be used in follow-up patch to make atomic operations
on shared memory safe.
xen/arm32: cmpxchg: Simplify the cmpxchg implementation
The only difference between each case of the cmpxchg is the size of
used. Rather than duplicating the code, provide a macro to generate each
cases.
This makes the code easier to read and modify.
While doing the rework, the case for 64-bit cmpxchg is removed. This is
unused today (already commented) and it would not be possible to use
it directly.
xen/grant_table: Rework the prototype of _set_status* for lisibility
It is not clear from the parameters name whether domid and gt_version
correspond to the local or remote domain. A follow-up patch will make
them more confusing.
So rename domid (resp. gt_version) to ldomid (resp. rgt_version). At
the same time re-order the parameters to hopefully make it more
readable.
This is part of XSA-295.
Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org>
xen/arm: Add an isb() before reading CNTPCT_EL0 to prevent re-ordering
Per D8.2.1 in ARM DDI 0487C.a, "a read to CNTPCT_EL0 can occur
speculatively and out of order relative to other instructions executed
on the same PE."
Add an instruction barrier to get accurate number of cycles when
requested in get_cycles(). For the other users of CNPCT_EL0, replace by
a call to get_cycles().
Jan Beulich [Tue, 12 Mar 2019 13:40:24 +0000 (14:40 +0100)]
events: drop arch_evtchn_inject()
Have the only user call vcpu_mark_events_pending() instead, at the same
time arranging for correct ordering of the writes (evtchn_pending_sel
should be written before evtchn_upcall_pending).
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com>
Julien Grall [Thu, 29 Nov 2018 11:37:43 +0000 (11:37 +0000)]
xen/arm: mm: Set-up page permission for Xen mappings earlier on
Xen mapping is first create using a 2MB page and then shatterred in 4KB
page for fine-graine permission. However, it is not safe to break-down
superpage page without going to an intermediate step invalidating
the entry.
As we are changing Xen mappings, we cannot go through the intermediate
step. The only solution is to create Xen mapping using 4KB entries
directly. As the Xen should always access the mappings according with
the runtime permission, it is then possible to set-up the permissions
while create the mapping.
We are still playing with the fire as there are still some
break-before-make issue in setup_pagetables (i.e switch between 2 sets of
page-tables). But it should slightly be better than the current state.
Igor Druzhinin [Thu, 6 Jun 2019 12:11:24 +0000 (14:11 +0200)]
libacpi: report PCI slots as enabled only for hotpluggable devices
DSDT for qemu-xen lacks _STA method of PCI slot object. If _STA method
doesn't exist then the slot is assumed to be always present and active
which in conjunction with _EJ0 method makes every device ejectable for
an OS even if it's not the case.
qemu-kvm is able to dynamically add _EJ0 method only to those slots
that either have hotpluggable devices or free for PCI passthrough.
As Xen lacks this capability we cannot use their way.
qemu-xen-traditional DSDT has _STA method which only reports that
the slot is present if there is a PCI devices hotplugged there.
This is done through querying of its PCI hotplug controller.
qemu-xen has similar capability that reports if device is "hotpluggable
or absent" which we can use to achieve the same result.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 6761965243b113230bed900d6105be05b28f5cea
master date: 2019-05-24 10:30:21 +0200
Jan Beulich [Thu, 6 Jun 2019 12:11:09 +0000 (14:11 +0200)]
x86/IO-APIC: fix build with gcc9
There are a number of pointless __packed attributes which cause gcc 9 to
legitimately warn:
utils.c: In function 'vtd_dump_iommu_info':
utils.c:287:33: error: converting a packed 'struct IO_APIC_route_entry' pointer (alignment 1) to a 'struct IO_APIC_route_remap_entry' pointer (alignment 8) may result in an unaligned pointer value [-Werror=address-of-packed-member]
287 | remap = (struct IO_APIC_route_remap_entry *) &rte;
| ^~~~~~~~~~~~~~~~~~~~~~~~~
intremap.c: In function 'ioapic_rte_to_remap_entry':
intremap.c:343:25: error: converting a packed 'struct IO_APIC_route_entry' pointer (alignment 1) to a 'struct IO_APIC_route_remap_entry' pointer (alignment 8) may result in an unaligned pointer value [-Werror=address-of-packed-member]
343 | remap_rte = (struct IO_APIC_route_remap_entry *) old_rte;
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Simply drop these attributes. Take the liberty and also re-format the
structure definitions at the same time.
Reported-by: Charles Arnold <carnold@suse.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: ca9310b24e6205de5387e5982ccd42c35caf89d4
master date: 2019-05-24 10:19:59 +0200
Jan Beulich [Thu, 6 Jun 2019 12:10:46 +0000 (14:10 +0200)]
x86emul: add support for missing {,V}PMADDWD insns
Their pre-AVX512 incarnations have clearly been overlooked during much
earlier work. Their memory access pattern is entirely standard, so no
specific tests get added to the harness.
Reported-by: Razvan Cojocaru <rcojocaru@bitdefender.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Tested-by: Alexandru Isaila <aisaila@bitdefender.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 1a48bdd599b268a2d9b7d0c45f1fd40c4892186e
master date: 2019-05-16 13:43:17 +0200
Jan Beulich [Thu, 6 Jun 2019 12:09:56 +0000 (14:09 +0200)]
x86/IRQ: avoid UB (or worse) in trace_irq_mask()
Dynamically allocated CPU mask objects may be smaller than cpumask_t, so
copying has to be restricted to the actual allocation size. This is
particulary important since the function doesn't bail early when tracing
is not active, so even production builds would be affected by potential
misbehavior here.
Take the opportunity and also
- use initializers instead of assignment + memset(),
- constify the cpumask_t input pointer,
- u32 -> uint32_t.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: George Dunlap <george.dunlap@citrix.com>
master commit: 6fafb8befa99620a2d7323b9eca5c387bad1f59f
master date: 2019-05-13 16:41:03 +0200
Andrew Cooper [Thu, 6 Jun 2019 12:09:37 +0000 (14:09 +0200)]
x86/boot: Fix latent memory corruption with early_boot_opts_t
c/s ebb26b509f "xen/x86: make VGA support selectable" added an #ifdef
CONFIG_VIDEO into the middle the backing space for early_boot_opts_t,
but didn't adjust the structure definition in cmdline.c
This only functions correctly because the affected fields are at the end
of the structure, and cmdline.c doesn't write to them in this case.
To retain the slimming effect of compiling out CONFIG_VIDEO, adjust
cmdline.c with enough #ifdef-ary to make C's idea of the structure match
the declaration in asm. This requires adding __maybe_unused annotations
to two helper functions.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 30596213617fcf4dd7b71d244e16c8fc0acf456b
master date: 2019-05-13 10:35:38 +0100
Andrew Cooper [Thu, 6 Jun 2019 12:09:20 +0000 (14:09 +0200)]
x86/svm: Fix handling of ICEBP intercepts
c/s 9338a37d "x86/svm: implement debug events" added support for introspecting
ICEBP debug exceptions, but didn't account for the fact that
svm_get_insn_len() (previously __get_instruction_length) can fail and may
already have raised #GP with the guest.
If svm_get_insn_len() fails, return back to guest context rather than
continuing and mistaking a trap-style VMExit for a fault-style one.
Spotted by Coverity.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Razvan Cojocaru <rcojocaru@bitdefender.com> Acked-by: Brian Woods <brian.woods@amd.com>
master commit: 1495b4ff9b4af2b9c0f12cdb6491082cecf34f86
master date: 2019-05-13 10:35:37 +0100
The limit 1900x1200 do not match real world devices (1900 looks like a
typo, should be 1920). But in practice the limits are arbitrary and do
not serve any real purpose. As discussed in "Increase framebuffer size
to todays standards" thread, drop them completely.
This fixes graphic console on device with 3840x2160 native resolution.
Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
drivers/video: drop unused limits
MAX_BPP, MAX_FONT_W, MAX_FONT_H are not used in the code at all.
Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 19600eb75aa9b1df3e4b0a4e55a5d08b957e1fd9
master date: 2019-05-13 10:13:24 +0200
master commit: 343459e34a6d32ba44a21f8b8fe4c1f69b1714c2
master date: 2019-05-13 10:12:56 +0200
When bitmap_fill(..., 0) is called, do not try to write anything. Before
this patch, it tried to write almost LONG_MAX, surely overwriting
something.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 93df28be2d4f620caf18109222d046355ac56327
master date: 2019-05-13 10:12:00 +0200
Tamas K Lengyel [Thu, 6 Jun 2019 12:07:54 +0000 (14:07 +0200)]
x86/vmx: correctly gather gs_shadow value for current vCPU
Currently the gs_shadow value is only cached when the vCPU is being scheduled
out by Xen. Reporting this (usually) stale value through vm_event is incorrect,
since it doesn't represent the actual state of the vCPU at the time the event
was recorded. This prevents vm_event subscribers from correctly finding kernel
structures in the guest when it is trapped while in ring3.
Refresh shadow_gs value when the context being saved is for the current vCPU.
Signed-off-by: Tamas K Lengyel <tamas@tklengyel.com> Acked-by: Razvan Cojocaru <rcojocaru@bitdefender.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Kevin Tian <kevin.tian@intel.com>
master commit: f69fc1c2f36e8a74ba54c9c8fa5c904ea1ad319e
master date: 2019-05-13 09:55:59 +0200
Igor Druzhinin [Thu, 6 Jun 2019 12:07:06 +0000 (14:07 +0200)]
x86/mtrr: recalculate P2M type for domains with iocaps
This change reflects the logic in epte_get_entry_emt() and allows
changes in guest MTTRs to be reflected in EPT for domains having
direct access to certain hardware memory regions but without IOMMU
context assigned (e.g. XenGT).
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: f3d880bf2be92534c5bacf11de2f561cbad550fb
master date: 2019-05-13 09:54:45 +0200
Jan Beulich [Thu, 6 Jun 2019 12:06:49 +0000 (14:06 +0200)]
AMD/IOMMU: disable previously enabled IOMMUs upon init failure
If any IOMMUs were successfully initialized before encountering failure,
the successfully enabled ones should be disabled again before cleaning
up their resources.
Move disable_iommu() next to enable_iommu() to avoid a forward
declaration, and take the opportunity to remove stray blank lines ahead
of both functions' final closing braces.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Brian Woods <brian.woods@amd.com>
master commit: 87a3347d476443c66c79953d77d6aef1d2bb3bbd
master date: 2019-05-13 09:52:43 +0200
Jan Beulich [Thu, 6 Jun 2019 12:06:29 +0000 (14:06 +0200)]
trace: fix build with gcc9
While I've not observed this myself, gcc 9 (imo validly) reportedly may
complain
trace.c: In function '__trace_hypercall':
trace.c:826:19: error: taking address of packed member of 'struct <anonymous>' may result in an unaligned pointer value [-Werror=address-of-packed-member]
826 | uint32_t *a = d.args;
and the fix is rather simple - remove the __packed attribute. Introduce
a BUILD_BUG_ON() as replacement, for the unlikely case that Xen might
get ported to an architecture where array alignment higher that that of
its elements.
Reported-by: Martin Liška <martin.liska@suse.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: George Dunlap <george.dunlap@citrix.com>
master commit: 3fd3b266d4198c06e8e421ca515d9ba09ccd5155
master date: 2019-05-13 09:51:23 +0200
Juergen Gross [Mon, 27 May 2019 13:55:20 +0000 (15:55 +0200)]
xen/sched: fix csched2_deinit_pdata()
Commit 753ba43d6d16e688 ("xen/sched: fix credit2 smt idle handling")
introduced a regression when switching cpus between cpupools.
When assigning a cpu to a cpupool with credit2 being the default
scheduler csched2_deinit_pdata() is called for the credit2 private data
after the new scheduler's private data has been hooked to the per-cpu
scheduler data. Unfortunately csched2_deinit_pdata() will cycle through
all per-cpu scheduler areas it knows of for removing the cpu from the
respective sibling masks including the area of the just moved cpu. This
will (depending on the new scheduler) either clobber the data of the
new scheduler or in case of sched_rt lead to a crash.
Avoid that by removing the cpu from the list of active cpus in credit2
data first.
The opposite problem is occurring when removing a cpu from a cpupool:
init_pdata() of credit2 will access the per-cpu data of the old
scheduler.
Andrew Cooper [Wed, 3 Oct 2018 09:32:54 +0000 (10:32 +0100)]
oxenstored: Don't re-open a xenctrl handle for every domain introduction
Currently, an xc handle is opened in main() which is used for cleanup
activities, and a new xc handle is temporarily opened every time a domain is
introduced. This is inefficient, and amongst other things, requires full root
privileges for the lifetime of oxenstored.
All code using the Xenctrl handle is in domains.ml, so initialise xc as a
global (now happens just before main() is called) and drop it as a parameter
from Domains.create and Domains.cleanup.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Christian Lindig <christian.lindig@citrix.com>
(cherry picked from commit 129025fe30934c6a04bbd9c05ade479d34ce4985)
Andrew Cooper [Thu, 29 Nov 2018 18:10:38 +0000 (18:10 +0000)]
tools/libxc: Fix issues with libxc and Xen having different featureset lengths
In almost all cases, Xen and libxc will agree on the featureset length,
because they are built from the same source.
However, there are circumstances (e.g. security hotfixes) where the featureset
gets longer and dom0 will, after installing updates, be running with an old
Xen but new libxc. Despite writing the code with this scenario in mind, there
were some bugs.
First, xen-cpuid's get_featureset() erroneously allocates a buffer based on
Xen's featureset length, but records libxc's length, which may be longer.
In this situation, the hypercall bounce buffer code reads/writes the recorded
length, which is beyond the end of the allocated object, and a later free()
encounters corrupt heap metadata. Fix this by recording the same length that
we allocate.
Secondly, get_cpuid_domain_info() has a related bug when the passed-in
featureset is a different length to libxc's.
A large amount of the libxc cpuid functionality depends on info->featureset
being as long as expected, and it is allocated appropriately. However, in the
case that a shorter external featureset is passed in, the logic to check for
trailing nonzero bits may read off the end of it. Rework the logic to use the
correct upper bound.
In addition, leave a comment next to the fields in struct cpuid_domain_info
explaining the relationship between the various lengths, and how to cope with
different lengths.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit c393b64dcee6684da25257b033148740cb6d7ff0)
Igor Druzhinin [Tue, 9 Apr 2019 12:01:58 +0000 (13:01 +0100)]
tools/xl: use libxl_domain_info to get domain type for vcpu-pin
Parsing the config seems to be an overkill for this particular task
and the config might simply be absent. Type returned from libxl_domain_info
should be either LIBXL_DOMAIN_TYPE_HVM or LIBXL_DOMAIN_TYPE_PV but in
that context distinction between PVH and HVM should be irrelevant.
Juergen Gross [Fri, 31 Aug 2018 15:22:04 +0000 (17:22 +0200)]
tools/libxl: correct vcpu affinity output with sparse physical cpu map
With not all physical cpus online (e.g. with smt=0) the output of hte
vcpu affinities is wrong, as the affinity bitmaps are capped after
nr_cpus bits, instead of using max_cpu_id.
Christian Lindig [Wed, 27 Feb 2019 10:33:42 +0000 (10:33 +0000)]
tools/ocaml: Dup2 /dev/null to stdin in daemonize()
Don't close stdin in daemonize() but dup2 /dev/null instead. Otherwise, fd 0
gets reused later:
[root@idol ~]# ls -lav /proc/`pgrep xenstored`/fd
total 0
dr-x------ 2 root root 0 Feb 28 11:02 .
dr-xr-xr-x 9 root root 0 Feb 27 15:59 ..
lrwx------ 1 root root 64 Feb 28 11:02 0 -> /dev/xen/evtchn
l-wx------ 1 root root 64 Feb 28 11:02 1 -> /dev/null
l-wx------ 1 root root 64 Feb 28 11:02 2 -> /dev/null
lrwx------ 1 root root 64 Feb 28 11:02 3 -> /dev/xen/privcmd
...
Signed-off-by: Christian Lindig <christian.lindig@citrix.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
(cherry picked from commit 677e64dbe315343620c3b266e9eb16623b118038)
tools/misc/xenpm: fix getting info when some CPUs are offline
Use physinfo.max_cpu_id instead of physinfo.nr_cpus to get max CPU id.
This fixes for example 'xenpm get-cpufreq-para' with smt=off, which
otherwise would miss half of the cores.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Acked-by: Wei Liu <wei.liu2@citrix.com>
(cherry picked from commit ffb60a58df48419c1f2607cd3cc919fa2bfc9c2d)
Jan Beulich [Wed, 15 May 2019 07:49:35 +0000 (09:49 +0200)]
x86: fix build race when generating temporary object files
The rules to generate xen-syms and xen.efi may run in parallel, but both
recursively invoke $(MAKE) to build symbol/relocation table temporary
object files. These recursive builds would both re-generate the .*.d2
files (where needed). Both would in turn invoke the same rule, thus
allowing for a race on the .*.d2.tmp intermediate files.
The dependency files of the temporary .xen*.o files live in xen/ rather
than xen/arch/x86/ anyway, so won't be included no matter what. Take the
opportunity and delete them, as the just re-generated .xen*.S files will
trigger a proper re-build of the .xen*.o ones anyway.
Empty the DEPS variable in case the set of goals consists of just those
temporary object files, thus eliminating the race.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 761bb575ce97255029d2d2249b2719e54bc76825
master date: 2019-04-11 10:25:05 +0200
Initially I had just noticed the unnecessary indirection in the call
from pi_update_irte(). The generic wrapper having an iommu_intremap
conditional made me look at the setup code though. So first of all
enforce the necessary dependency.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 6c54663786d9f1ed04153867687c158675e7277d
master date: 2019-04-09 15:12:07 +0200
Petre Pircalabu [Wed, 15 May 2019 07:48:28 +0000 (09:48 +0200)]
vm_event: fix XEN_VM_EVENT_RESUME domctl
Make XEN_VM_EVENT_RESUME return 0 in case of success, instead of
-EINVAL.
Remove vm_event_resume form vm_event.h header and set the function's
visibility to static as is used only in vm_event.c.
Move the vm_event_check_ring test inside vm_event_resume in order to
simplify the code.
Andrew Cooper [Wed, 15 May 2019 07:47:32 +0000 (09:47 +0200)]
xen/timers: Fix memory leak with cpu unplug/plug
timer_softirq_action() realloc's itself a larger timer heap whenever
necessary, which includes bootstrapping from the empty dummy_heap. Nothing
ever freed this allocation.
CPU plug and unplug has the side effect of zeroing the percpu data area, which
clears ts->heap. This in turn causes new timers to be put on the list rather
than the heap, and for timer_softirq_action() to bootstrap itself again.
This in practice leaks ts->heap every time a CPU is unplugged and replugged.
Implement free_percpu_timers() which includes freeing ts->heap when
appropriate, and update the notifier callback with the recent cpu parking
logic and free-avoidance across suspend.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
xen/cpu: Fix ARM build following c/s 597fbb8
c/s 597fbb8 "xen/timers: Fix memory leak with cpu unplug/plug" broke the ARM
build by being the first patch to add park_offline_cpus to common code.
While it is currently specific to Intel hardware (for reasons of being able to
handle machine check exceptions without an immediate system reset), it isn't
inherently architecture specific, so define it to be false on ARM for now.
Add a comment in both smp.h headers explaining the intended behaviour of the
option.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Julien Grall <julien.grall@arm.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com>
timers: move back migrate_timers_from_cpu() invocation
Commit 597fbb8be6 ("xen/timers: Fix memory leak with cpu unplug/plug")
went a little too far: Migrating timers away from a CPU being offlined
needs to heppen independent of whether it get parked or fully offlined.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
xen/timers: Fix memory leak with cpu unplug/plug (take 2)
Previous attempts to fix this leak failed to identify the root cause, and
ultimately failed. The cause is the CPU_UP_PREPARE case (re)initialising
ts->heap back to dummy_heap, which leaks the previous allocation.
Rearrange the logic to only initialise ts once. This also avoids the
redundant (but benign, due to ts->inactive always being empty) initialising of
the other ts fields.
Jan Beulich [Wed, 15 May 2019 07:46:41 +0000 (09:46 +0200)]
x86emul: suppress general register update upon AVX gather failures
While destination and mask registers may indeed need updating in this
case, the rIP update in particular needs to be avoided, as well as e.g.
raising a single step trap.
Reported-by: George Dunlap <george.dunlap@citrix.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 74f299bbd7d5cc52325b5866c17b44dd0bd1c5a2
master date: 2019-04-03 10:14:32 +0200
Juergen Gross [Wed, 15 May 2019 07:45:58 +0000 (09:45 +0200)]
xen/sched: fix credit2 smt idle handling
Credit2's smt_idle_mask_set() and smt_idle_mask_clear() are used to
identify idle cores where vcpus can be moved to. A core is thought to
be idle when all siblings are known to have the idle vcpu running on
them.
Unfortunately the information of a vcpu running on a cpu is per
runqueue. So in case not all siblings are in the same runqueue a core
will never be regarded to be idle, as the sibling not in the runqueue
is never known to run the idle vcpu.
Use a credit2 specific cpumask of siblings with only those cpus
being marked which are in the same runqueue as the cpu in question.
Andrew Cooper [Wed, 12 Dec 2018 19:22:15 +0000 (19:22 +0000)]
x86/spec-ctrl: Introduce options to control VERW flushing
The Microarchitectural Data Sampling vulnerability is split into categories
with subtly different properties:
MLPDS - Microarchitectural Load Port Data Sampling
MSBDS - Microarchitectural Store Buffer Data Sampling
MFBDS - Microarchitectural Fill Buffer Data Sampling
MDSUM - Microarchitectural Data Sampling Uncacheable Memory
MDSUM is a special case of the other three, and isn't distinguished further.
These issues pertain to three microarchitectural buffers. The Load Ports, the
Store Buffers and the Fill Buffers. Each of these structures are flushed by
the new enhanced VERW functionality, but the conditions under which flushing
is necessary vary.
For this concise overview of the issues and default logic, the abbreviations
SP (Store Port), FB (Fill Buffer), LP (Load Port) and HT (Hyperthreading) are
used for brevity:
* Vulnerable hardware is divided into two categories - parts which suffer
from SP only, and parts with any other combination of vulnerabilities.
* SP only has an HT interaction when the thread goes idle, due to the static
partitioning of resources. LP and FB have HT interactions at all points,
due to the competitive sharing of resources. All issues potentially leak
data across the return-to-guest transition.
* The microcode which implements VERW flushing also extends MSR_FLUSH_CMD, so
we don't need to do both on the HVM return-to-guest path. However, some
parts are not vulnerable to L1TF (therefore have no MSR_FLUSH_CMD), but are
vulnerable to MDS, so do require VERW on the HVM path.
Note that we deliberately support mds=1 even without MD_CLEAR in case the
microcode has been updated but the feature bit not exposed.
This is part of XSA-297, CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 3c04c258ab40405a74e194d9889a4cbc7abe94b4)
Andrew Cooper [Wed, 12 Dec 2018 19:22:15 +0000 (19:22 +0000)]
x86/spec-ctrl: Infrastructure to use VERW to flush pipeline buffers
Three synthetic features are introduced, as we need individual control of
each, depending on circumstances. A later change will enable them at
appropriate points.
The verw_sel field doesn't strictly need to live in struct cpu_info. It lives
there because there is a convenient hole it can fill, and it reduces the
complexity of the SPEC_CTRL_EXIT_TO_{PV,HVM} assembly by avoiding the need for
any temporary stack maintenance.
This is part of XSA-297, CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 548a932ac786d6bf3584e4b54f2ab993e1117710)
Andrew Cooper [Wed, 12 Sep 2018 13:36:00 +0000 (14:36 +0100)]
x86/spec-ctrl: CPUID/MSR definitions for Microarchitectural Data Sampling
The MD_CLEAR feature can be automatically offered to guests. No
infrastructure is needed in Xen to support the guest making use of it.
This is part of XSA-297, CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit d4f6116c080dc013cd1204c4d8ceb95e5f278689)
Andrew Cooper [Wed, 12 Sep 2018 13:36:00 +0000 (14:36 +0100)]
x86/spec-ctrl: Misc non-functional cleanup
* Identify BTI in the spec_ctrl_{enter,exit}_idle() comments, as other
mitigations will shortly appear.
* Use alternative_input() and cover the lack of memory cobber with a further
barrier.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 9b62eba6c429c327e1507816bef403ccc87357ae)
Andrew Cooper [Fri, 5 Apr 2019 12:26:30 +0000 (13:26 +0100)]
x86/boot: Detect the firmware SMT setting correctly on Intel hardware
While boot_cpu_data.x86_num_siblings is an accurate value to use on AMD
hardware, it isn't on Intel when the user has disabled Hyperthreading in the
firmware. As a result, a user which has chosen to disable HT still gets
nagged on L1TF-vulnerable hardware when they haven't chosen an explicit
smt=<bool> setting.
Make use of the largely-undocumented MSR_INTEL_CORE_THREAD_COUNT which in
practice exists since Nehalem, when booting on real hardware. Fall back to
using the ACPI table APIC IDs.
While adjusting this logic, fix a latent bug in amd_get_topology(). The
thread count field in CPUID.0x8000001e.ebx is documented as 8 bits wide,
rather than 2 bits wide.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit b12fec4a125950240573ea32f65c61fb9afa74c3)
Andrew Cooper [Fri, 5 Apr 2019 12:26:30 +0000 (12:26 +0000)]
x86/msr: Definitions for MSR_INTEL_CORE_THREAD_COUNT
This is a model specific register which details the current configuration
cores and threads in the package. Because of how Hyperthread and Core
configuration works works in firmware, the MSR it is de-facto constant and
will remain unchanged until the next system reset.
It is a read only MSR (so unilaterally reject writes), but for now retain its
leaky-on-read properties. Further CPUID/MSR work is required before we can
start virtualising a consistent topology to the guest, and retaining the old
behaviour is the safest course of action.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit d4120936bcd1695faf5b575f1259c58e31d2b18b)
Andrew Cooper [Wed, 12 Sep 2018 13:36:00 +0000 (14:36 +0100)]
x86/spec-ctrl: Reposition the XPTI command line parsing logic
It has ended up in the middle of the mitigation calculation logic. Move it to
be beside the other command line parsing.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit c2c2bb0d60c642e64a5243a79c8b1548ffb7bc5b)
Andrew Cooper [Fri, 3 May 2019 08:55:55 +0000 (10:55 +0200)]
x86/spec-ctrl: Extend repoline safey calcuations for eIBRS and Atom parts
All currently-released Atom processors are in practice retpoline-safe, because
they don't fall back to a BTB prediction on RSB underflow.
However, an additional meaning of Enhanced IRBS is that the processor may not
be retpoline-safe. The Gemini Lake platform, based on the Goldmont Plus
microarchitecture is the first Atom processor to support eIBRS.
Until Xen gets full eIBRS support, Gemini Lake will still be safe using
regular IBRS.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: 17f74242ccf0ce6e51c03a5860947865c0ef0dc2
master date: 2019-03-18 16:26:40 +0000
Jan Beulich [Fri, 3 May 2019 08:53:40 +0000 (10:53 +0200)]
x86/e820: fix build with gcc9
e820.c: In function ‘clip_to_limit’:
.../xen/include/asm/string.h:10:26: error: ‘__builtin_memmove’ offset [-16, -36] is out of the bounds [0, 20484] of object ‘e820’ with type ‘struct e820map’ [-Werror=array-bounds]
10 | #define memmove(d, s, n) __builtin_memmove(d, s, n)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
e820.c:404:13: note: in expansion of macro ‘memmove’
404 | memmove(&e820.map[i], &e820.map[i+1],
| ^~~~~~~
e820.c:36:16: note: ‘e820’ declared here
36 | struct e820map e820;
| ^~~~
While I can't see where the negative offsets would come from, converting
the loop index to unsigned type helps. Take the opportunity and also
convert several other local variables and copy_e820_map()'s second
parameter to unsigned int (and bool in one case).
Reported-by: Charles Arnold <carnold@suse.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 22e2f8dddf5fbed885b5e4db3ffc9e1101be9ec0
master date: 2019-03-18 11:38:36 +0100
Andrew Cooper [Fri, 3 May 2019 08:51:31 +0000 (10:51 +0200)]
xen: Fix backport of "x86/tsx: Implement controls for RTM force-abort mode"
The posted version of this patch depends on c/s 3c555295 "x86/vpmu: Improve
documentation and parsing for vpmu=" (Xen 4.12 and later) to prevent
`vpmu=rtm-abort` impliying `vpmu=1`, which is outside of security support.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
Wei Liu [Wed, 28 Nov 2018 17:43:33 +0000 (17:43 +0000)]
tools/firmware: update OVMF Makefile, when necessary
[ This is two commits from master aka staging-4.12: ]
OVMF has become dependent on OpenSSL, which is included as a
submodule. Initialise submodules before building.
Signed-off-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
(cherry picked from commit b16281870e06f5f526029a4e69634a16dc38e8e4)
tools: only call git when necessary in OVMF Makefile
Users may choose to export a snapshot of OVMF and build it
with xen.git supplied ovmf-makefile. In that case we don't
need to call `git submodule`.
Andrew Cooper [Mon, 18 Mar 2019 16:09:08 +0000 (17:09 +0100)]
x86/pv: Fix construction of 32bit dom0's
dom0_construct_pv() has logic to transition dom0 into a compat domain when
booting an ELF32 image.
One aspect which is missing is the CPUID policy recalculation, meaning that a
32bit dom0 sees a 64bit policy, which differ by the Long Mode feature flag in
particular. Another missing item is the x87_fip_width initialisation.
Update dom0_construct_pv() to use switch_compat(), rather than retaining the
opencoding. Position the call to switch_compat() such that the compat32 local
variable can disappear entirely.
The 32bit monitor table is now created by setup_compat_l4(), avoiding the need
to for manual creation later.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 356f437171c5bb90701ac9dd7ba4dbbd05988e38
master date: 2019-03-15 14:59:27 +0000
Andrew Cooper [Mon, 18 Mar 2019 16:08:25 +0000 (17:08 +0100)]
x86/tsx: Implement controls for RTM force-abort mode
The CPUID bit and MSR are deliberately not exposed to guests, because they
won't exist on newer processors. As vPMU isn't security supported, the
misbehaviour of PCR3 isn't expected to impact production deployments.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 6be613f29b4205349275d24367bd4c82fb2960dd
master date: 2019-03-12 17:05:21 +0000
Andrew Cooper [Mon, 18 Mar 2019 16:07:45 +0000 (17:07 +0100)]
x86/vtd: Don't include control register state in the table pointers
iremap_maddr and qinval_maddr point to the base of a block of contiguous RAM,
allocated by the driver, holding the Interrupt Remapping table, and the Queued
Invalidation ring.
Despite their name, they are actually the values of the hardware register,
including control metadata in the lower 12 bits. While uses of these fields
do appear to correctly shift out the metadata, this is very subtle behaviour
and confusing to follow.
Nothing uses the metadata, so make the fields actually point at the base of
the relevant tables.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Kevin Tian <kevin.tian@intel.com>
master commit: a9a05aeee10a5a3763a41305a9f38112dd1fcc82
master date: 2019-03-12 13:57:13 +0000
Jan Beulich [Mon, 18 Mar 2019 16:07:11 +0000 (17:07 +0100)]
x86/HVM: don't crash guest in hvmemul_find_mmio_cache()
Commit 35a61c05ea ("x86emul: adjust handling of AVX2 gathers") builds
upon the fact that the domain will actually survive running out of MMIO
result buffer space. Drop the domain_crash() invocation. Also delay
incrementing of the usage counter, such that the function can't possibly
use/return an out-of-bounds slot/pointer in case execution subsequently
makes it into the function again without a prior reset of state.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
master commit: a43c1dec246bdee484e6a3de001cc6850a107abe
master date: 2019-03-12 14:39:46 +0100
Igor Druzhinin [Mon, 18 Mar 2019 16:06:37 +0000 (17:06 +0100)]
iommu: leave IOMMU enabled by default during kexec crash transition
It's unsafe to disable IOMMU on a live system which is the case
if we're crashing since remapping hardware doesn't usually know what
to do with ongoing bus transactions and frequently raises NMI/MCE/SMI,
etc. (depends on the firmware configuration) to signal these abnormalities.
This, in turn, doesn't play well with kexec transition process as there is
no handling available at the moment for this kind of events resulting
in failures to enter the kernel.
Modern Linux kernels taught to copy all the necessary DMAR/IR tables
following kexec from the previous kernel (Xen in our case) - so it's
currently normal to keep IOMMU enabled. It might require minor changes to
kdump command line that enables IOMMU drivers (e.g. intel_iommu=on /
intremap=on) but recent kernels don't require any additional changes for
the transition to be transparent.
A fallback option is still left for compatibility with ancient crash
kernels which didn't like to have IOMMU active under their feet on boot.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: 12c36f577d454996c882ecdc5da8113ca2613646
master date: 2019-03-12 14:38:12 +0100
Jan Beulich [Mon, 18 Mar 2019 16:05:45 +0000 (17:05 +0100)]
x86/cpuid: add missing PCLMULQDQ dependency
Since we can't seem to be able to settle our discussion for the wider
adjustment previously posted, let's at least add the missing dependency
for 4.12. I'm not convinced though that attaching it to SSE is correct.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: eeb31ee522c7bb8541eb4c037be2c42bfcf0a3c3
master date: 2019-03-05 18:04:23 +0100
Jan Beulich [Mon, 18 Mar 2019 16:05:07 +0000 (17:05 +0100)]
x86/mm: fix #GP(0) in switch_cr3_cr4()
With "pcid=no-xpti" and opposite XPTI settings in two 64-bit PV domains
(achievable with one of "xpti=no-dom0" or "xpti=no-domu"), switching
from a PCID-disabled to a PCID-enabled 64-bit PV domain fails to set
CR4.PCIDE in time, as CR4.PGE would not be set in either (see
pv_fixup_guest_cr4(), in particular as used by write_ptbase()), and
hence the early CR4 write would be skipped.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: fdc2056767ba74346dfd8bbe868bb22521ba1418
master date: 2019-03-05 17:02:36 +0100
Igor Druzhinin [Mon, 18 Mar 2019 16:04:30 +0000 (17:04 +0100)]
x86/nmi: correctly check MSB of P6 performance counter MSR in watchdog
The logic currently tries to work out if a recent overflow (that indicates
that NMI comes from the watchdog) happened by checking MSB of performance
counter MSR that is initially sign extended from a negative value
that we program it to. A possibly incorrect assumption here is that
MSB is always bit 32 while on modern hardware it's usually 47 and
the actual bit-width is reported through CPUID. Checking bit 32 for
overflows is usually fine since we never program it to anything
exceeding 32-bits and NMI is handled shortly after overflow occurs.
A problematic scenario that we saw occurs on systems where SMIs taking
significant time are possible. In that case, NMI handling is deferred to
the point firmware exits SMI which might take enough time for the counter
to go through bit 32 and set it to 1 again. So the logic described above
will misread it and report an unknown NMI erroneously.
Fortunately, we can use the actual MSB, which is usually higher than the
currently hardcoded 32, and treat this case correctly at least on modern
hardware.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 0452d02b6e7849537914dd30cbfc8eb27cdad2ce
master date: 2019-02-28 13:44:40 +0000
A triple fault is fatal to the domain under all circumstances (so will print
at most once), and in practice is always an error condition rather than a
reboot fallback.
Reported-by: Razvan Cojocaru <rcojocaru@bitdefender.com> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: 1c8ca185e3c6e003398471edd9dbac0cd118137c
master date: 2019-02-28 11:16:27 +0000
Andrew Cooper [Mon, 18 Mar 2019 16:02:49 +0000 (17:02 +0100)]
x86/vmx: Properly flush the TLB when an altp2m is modified
Modifications to an altp2m mark the p2m as needing flushing, but this was
never wired up in the return-to-guest path. As a result, stale TLB entries
can remain after resuming the guest.
In practice, this manifests as a missing EPT_VIOLATION or #VE exception when
the guest subsequently accesses a page which has had its permissions reduced.
vmx_vmenter_helper() now has 11 p2ms to potentially invalidate, but issuing 11
INVEPT instructions isn't clever. Instead, count how many contexts need
invalidating, and use INVEPT_ALL_CONTEXT if two or more are in need of
flushing.
This doesn't have an XSA because altp2m is not yet a security-supported
feature.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Razvan Cojocaru <rcojocaru@bitdefender.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Kevin Tian <kevin.tian@intel.com>
master commit: 69f7643df68ef8e994221a996e336a47cbb7bbc8
master date: 2019-02-28 11:16:27 +0000
Jan Beulich [Mon, 18 Mar 2019 16:02:02 +0000 (17:02 +0100)]
x86/shadow: don't use map_domain_page_global() on paths that may not fail
The assumption (according to one comment) and hope (according to
another) that map_domain_page_global() can't fail are both wrong on
large enough systems. Do away with the guest_vtable field altogether,
and establish / tear down the desired mapping as necessary.
The alternatives, discarded as being undesirable, would have been to
either crash the guest in sh_update_cr3() when the mapping fails, or to
bubble up an error indicator, which upper layers would have a hard time
to deal with (other than again by crashing the guest).
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Tim Deegan <tim@xen.org>
master commit: 43282a5e64da26fad544e0100abf35048cf65b46
master date: 2019-02-26 16:56:26 +0100
Paul Durrant [Mon, 18 Mar 2019 16:01:21 +0000 (17:01 +0100)]
viridian: fix the HvFlushVirtualAddress/List hypercall implementation
The current code uses hvm_asid_flush_vcpu() but this is insufficient for
a guest running in shadow mode, which results in guest crashes early in
boot if the 'hcall_remote_tlb_flush' is enabled.
This patch, instead of open coding a new flush algorithm, adapts the one
already used by the HVMOP_flush_tlbs Xen hypercall. The implementation is
modified to allow TLB flushing a subset of a domain's vCPUs. A callback
function determines whether or not a vCPU requires flushing. This mechanism
was chosen because, while it is the case that the currently implemented
viridian hypercalls specify a vCPU mask, there are newer variants which
specify a sparse HV_VP_SET and thus use of a callback will avoid needing to
expose details of this outside of the viridian subsystem if and when those
newer variants are implemented.
NOTE: Use of the common flush function requires that the hypercalls are
restartable and so, with this patch applied, viridian_hypercall()
can now return HVM_HCALL_preempted. This is safe as no modification
to struct cpu_user_regs is done before the return.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: ce98ee3050a824994ce4957faa8f53ecb8c7da9d
master date: 2019-02-26 16:55:06 +0100
Jan Beulich [Mon, 18 Mar 2019 16:00:28 +0000 (17:00 +0100)]
x86/shadow: don't pass wrong L4 MFN to guest_walk_tables()
64-bit PV guest user mode runs on a different L4 table. Make sure
- the accessed bit gets set in the correct table (and in log-dirty
mode the correct page gets marked dirty) during guest walks,
- the correct table gets audited by sh_audit_gw(),
- correct info gets logged by print_gw().
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: George Dunlap <george.dunlap@citrix.com>
master commit: db2af23d15077605f286d8ef86c8f5d9c1b8302a
master date: 2019-02-20 17:07:17 +0100
Varad Gautam [Mon, 18 Mar 2019 15:59:43 +0000 (16:59 +0100)]
x86/pmtimer: fix hvm_acpi_sleep_button behavior
Commit 19fb14622e941 "x86/pmtimer: move ACPI registers from PMTState to
hvm_domain" misconfigures pm1a_sts for hvm_acpi_sleep_button with
PWRBTN_STS instead of SLPBTN_STS, which leads to
XEN_DOMCTL_SENDTRIGGER_SLEEP causing guest powerdowns. Fix this.
Signed-off-by: Varad Gautam <vrd@amazon.de> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: b22c900c44a2db8db1c53e269e152206e55c273f
master date: 2019-02-20 17:06:25 +0100
Jan Beulich [Tue, 5 Mar 2019 14:06:47 +0000 (15:06 +0100)]
x86/pv: _toggle_guest_pt() may not skip TLB flush for shadow mode guests
For shadow mode guests (e.g. PV ones forced into that mode as L1TF
mitigation, or during migration) update_cr3() -> sh_update_cr3() may
result in a change to the (shadow) root page table (compared to the
previous one when running the same vCPU with the same PCID). This can,
first and foremost, be a result of memory pressure on the shadow memory
pool of the domain. Shadow code legitimately relies on the original
(prior to commit 5c81d260c2 ["xen/x86: use PCID feature"]) behavior of
the subsequent CR3 write to flush the TLB of entries still left from
walks with an earlier, different (shadow) root page table.
Restore the flushing behavior, also for the second CR3 write on the exit
path to guest context when XPTI is active. For the moment accept that
this will introduce more flushes than are strictly necessary - no flush
would be needed when the (shadow) root page table doesn't actually
change, but this information isn't readily (i.e. without introducing a
layering violation) available here.
This is XSA-294.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Tested-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 329b00e4d49f70185561d7cc4b076c77869888a0
master date: 2019-03-05 13:54:42 +0100
Andrew Cooper [Tue, 5 Mar 2019 14:05:50 +0000 (15:05 +0100)]
x86/pv: Don't have %cr4.fsgsbase active behind a guest kernels back
Currently, a 64bit PV guest can appear to set and clear FSGSBASE in %cr4, but
the bit remains set in hardware. Therefore, the {RD,WR}{FS,GS}BASE are usable
even when the guest kernel believes that they are disabled.
The FSGSBASE feature isn't currently supported in Linux, and its context
switch path has some optimisations which rely on userspace being unable to use
the WR{FS,GS}BASE instructions. Xen's current behaviour undermines this
expectation.
In 64bit PV guest context, always load the guest kernels setting of FSGSBASE
into %cr4. This requires adjusting how Xen uses the {RD,WR}{FS,GS}BASE
instructions.
* Delete the cpu_has_fsgsbase helper. It is no longer safe, as users need to
check %cr4 directly.
* The raw __rd{fs,gs}base() helpers are only safe to use when %cr4.fsgsbase
is set. Comment this property.
* The {rd,wr}{fs,gs}{base,shadow}() and read_msr() helpers are updated to use
the current %cr4 value to determine which mechanism to use.
* toggle_guest_mode() and save_segments() are update to avoid reading
fs/gsbase if the values in hardware cannot be stale WRT struct vcpu. A
consequence of this is that the write_cr() path needs to cache the current
bases, as subsequent context switches will skip saving the values.
* write_cr4() is updated to ensure that the shadow %cr4.fsgsbase value is
observed in a safe way WRT the hardware setting, if an interrupt happens to
hit in the middle.
* load_segments() is updated to use the VMLOAD optimisation if FSGSBASE is
unavailable, even if only gs_shadow needs updating. As a minor perf
improvement, check cpu_has_svm first to short circuit a context-dependent
conditional on Intel hardware.
* pv_make_cr4() is updated for 64bit PV guests to use the guest kernels
choice of FSGSBASE.
This is part of XSA-293.
Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: eccc170053e46b4ab1d9e7485c09e210be15bbd7
master date: 2019-03-05 13:54:05 +0100
Andrew Cooper [Tue, 5 Mar 2019 14:04:54 +0000 (15:04 +0100)]
x86/pv: Rewrite guest %cr4 handling from scratch
The PV cr4 logic is almost impossible to follow, and leaks bits into guest
context which definitely shouldn't be visible (in particular, VMXE).
The biggest problem however, and source of the complexity, is that it derives
new real and guest cr4 values from the current value in hardware - this is
context dependent and an inappropriate source of information.
Rewrite the cr4 logic to be invariant of the current value in hardware.
First of all, modify write_ptbase() to always use mmu_cr4_features for IDLE
and HVM contexts. mmu_cr4_features *is* the correct value to use, and makes
the ASSERT() obviously redundant.
For PV guests, curr->arch.pv.ctrlreg[4] remains the guests view of cr4, but
all logic gets reworked in terms of this and mmu_cr4_features only.
Two masks are introduced; bits which the guest has control over, and bits
which are forwarded from Xen's settings. One guest-visible change here is
that Xen's VMXE setting is no longer visible at all.
pv_make_cr4() follows fairly closely from pv_guest_cr4_to_real_cr4(), but
deliberately starts with mmu_cr4_features, and only alters the minimal subset
of bits.
The boot-time {compat_,}pv_cr4_mask variables are removed, as they are a
remnant of the pre-CPUID policy days. pv_fixup_guest_cr4() gains a related
derivation from the policy.
Another guest visible change here is that a 32bit PV guest can now flip
FSGSBASE in its view of CR4. While the {RD,WR}{FS,GS}BASE instructions are
unusable outside of a 64bit code segment, the ability to modify FSGSBASE
matches real hardware behaviour, and avoids the need for any 32bit/64bit
differences in the logic.
Overall, this patch shouldn't have a practical change in guest behaviour.
VMXE will disappear from view, and an inquisitive 32bit kernel can now see
FSGSBASE changing, but this new logic is otherwise bug-compatible with before.
This is part of XSA-293.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: b2dd00574a4fc87ca964177f8e752a968c27efb2
master date: 2019-03-05 13:53:32 +0100
projects / people / dwmw2 / xen.git / log