Peter Maydell [Fri, 12 May 2023 14:43:37 +0000 (15:43 +0100)]
target/arm: Fix handling of SW and NSW bits for stage 2 walks
We currently don't correctly handle the VSTCR_EL2.SW and VTCR_EL2.NSW
configuration bits. These allow configuration of whether the stage 2
page table walks for Secure IPA and NonSecure IPA should do their
descriptor reads from Secure or NonSecure physical addresses. (This
is separate from how the translation table base address and other
parameters are set: an NS IPA always uses VTTBR_EL2 and VTCR_EL2
for its base address and walk parameters, regardless of the NSW bit,
and similarly for Secure.)
Provide a new function ptw_idx_for_stage_2() which returns the
MMU index to use for descriptor reads, and use it to set up
the .in_ptw_idx wherever we call get_phys_addr_lpae().
For a stage 2 walk, wherever we call get_phys_addr_lpae():
* .in_ptw_idx should be ptw_idx_for_stage_2() of the .in_mmu_idx
* .in_secure should be true if .in_mmu_idx is Stage2_S
This allows us to correct S1_ptw_translate() so that it consistently
always sets its (out_secure, out_phys) to the result it gets from the
S2 walk (either by calling get_phys_addr_lpae() or by TLB lookup).
This makes better conceptual sense because the S2 walk should return
us an (address space, address) tuple, not an address that we then
randomly assign to S or NS.
Our previous handling of SW and NSW was broken, so guest code
trying to use these bits to put the s2 page tables in the "other"
address space wouldn't work correctly.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1600 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20230504135425.2748672-3-peter.maydell@linaro.org
Peter Maydell [Fri, 12 May 2023 14:43:37 +0000 (15:43 +0100)]
target/arm: Don't allow stage 2 page table walks to downgrade to NS
Bit 63 in a Table descriptor is only the NSTable bit for stage 1
translations; in stage 2 it is RES0. We were incorrectly looking at
it all the time.
This causes problems if:
* the stage 2 table descriptor was incorrectly setting the RES0 bit
* we are doing a stage 2 translation in Secure address space for
a NonSecure stage 1 regime -- in this case we would incorrectly
do an immediate downgrade to NonSecure
A bug elsewhere in the code currently prevents us from getting
to the second situation, but when we fix that it will be possible.
Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230504135425.2748672-2-peter.maydell@linaro.org
Merge tag 'pull-tcg-20230511-2' of https://gitlab.com/rth7680/qemu into staging
target/m68k: Fix gen_load_fp regression
accel/tcg: Ensure fairness with icount
disas: Move disas.c into the target-independent source sets
tcg: Use common routines for calling slow path helpers
tcg/*: Cleanups to qemu_ld/st constraints
tcg: Remove TARGET_ALIGNED_ONLY
accel/tcg: Reorg system mode load/store helpers
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmRcxtYdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV9arQf8Di7CnMQE/jW+8w6v
# 5af0dX8/St2JnCXzG+qiW6mJm50Cy4GunCN66JcCAswpENvQLLsJP13c+4KTeB1T
# rGBbedFXTw1LsaoOcBvwhq7RTIROz4GESTS4EZoJMlMhMv0VotekUPPz4NFMZRKX
# LMvShM2C+f2p4HmDnnbki7M3+tMqpgoGCeBFX8Jy7/5sbpS/7ceXRio3ZRAhasPu
# vjA0zqUtoTs7ijKpXf3uRl/c7xql+f0d7SDdCRt4OKasfLCCDwkjtMf6plZ2jzuS
# OgwKc5N1jaMF6erHYZJIbfLLdUl20/JJEcbpU3Eh1XuHnzn1msS9JDOm2tvzwsto
# OpOKUg==
# =Lhy3
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 11 May 2023 11:43:34 AM BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-tcg-20230511-2' of https://gitlab.com/rth7680/qemu: (53 commits)
target/loongarch: Do not include tcg-ldst.h
accel/tcg: Reorg system mode store helpers
accel/tcg: Reorg system mode load helpers
accel/tcg: Introduce tlb_read_idx
accel/tcg: Add cpu_in_serial_context
tcg: Remove TARGET_ALIGNED_ONLY
target/sh4: Remove TARGET_ALIGNED_ONLY
target/sh4: Use MO_ALIGN where required
target/nios2: Remove TARGET_ALIGNED_ONLY
target/mips: Remove TARGET_ALIGNED_ONLY
target/mips: Use MO_ALIGN instead of 0
target/mips: Add missing default_tcg_memop_mask
target/mips: Add MO_ALIGN to gen_llwp, gen_scwp
tcg/s390x: Simplify constraints on qemu_ld/st
tcg/s390x: Use ALGFR in constructing softmmu host address
tcg/riscv: Simplify constraints on qemu_ld/st
tcg/ppc: Remove unused constraint J
tcg/ppc: Remove unused constraints A, B, C, D
tcg/ppc: Adjust constraints on qemu_ld/st
tcg/ppc: Reorg tcg_out_tlb_read
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This header is supposed to be private to tcg and in fact
does not need to be included here at all.
Reviewed-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, use
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of trying to unify all operations on uint64_t, pull out
mmu_lookup() to perform the basic tlb hit and resolution.
Create individual functions to handle access by size.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of playing with offsetof in various places, use
MMUAccessType to index an array. This is easily defined
instead of the previous dummy padding array in the union.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Like cpu_in_exclusive_context, but also true if
there is no other cpu against which we could race.
Use it in tb_flush as a direct replacement.
Use it in cpu_loop_exit_atomic to ensure that there
is no loop against cpu_exec_step_atomic.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In gen_ldx/gen_stx, the only two locations for memory operations,
mark the operation as either aligned (softmmu) or unaligned
(user-only, as if emulated by the kernel).
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Adjust the softmmu tlb to use R0+R1, not any of the normally available
registers. Since we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_TMP[0-2], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These constraints have not been used for quite some time.
Fixes: 77b73de67632 ("Use rem/div[u]_i32 drop div[u]2_i32") Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_{TMP1,TMP2,R0}, not any of the normally
available registers. Now that we handle overlap betwen inputs and
helper arguments, we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allocate TCG_REG_TMP2. Use R0, TMP1, TMP2 instead of any of
the normally allocated registers for the tlb load.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softmmu tlb uses TCG_REG_TMP[0-3], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
and have eliminated use of A0, we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Compare the address vs the tlb entry with sign-extended values.
This simplifies the page+alignment mask constant, and the
generation of the last byte address for the misaligned test.
Move the tlb addend load up, and the zero-extension down.
This frees up a register, which allows us use TMP3 as the returned base
address register instead of A0, which we were using as a 5th temporary.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg/loongarch64: Simplify constraints on qemu_ld/st
The softmmu tlb uses TCG_REG_TMP[0-2], not any of the normally available
registers. Now that we handle overlap betwen inputs and helper arguments,
we can allow any allocatable reg.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use tcg_out_st_helper_args. This eliminates the use of a tail call to
the store helper. This may or may not be an improvement, depending on
the call/return branch prediction of the host microarchitecture.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add tcg_out_ld_helper_args, tcg_out_ld_helper_ret,
and tcg_out_st_helper_args. These and their subroutines
use the existing knowledge of the host function call abi
to load the function call arguments and return results.
These will be used to simplify the backends in turn.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label, tcg_out_test_alignment,
tcg_prepare_user_ldst, and some code that lived in both tcg_out_qemu_ld
and tcg_out_qemu_st into one function that returns HostAddress and
TCGLabelQemuLdst structures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label, tcg_out_test_alignment,
and some code that lived in both tcg_out_qemu_ld and tcg_out_qemu_st
into one function that returns TCGReg and TCGLabelQemuLdst.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label, tcg_out_test_alignment,
and some code that lived in both tcg_out_qemu_ld and tcg_out_qemu_st
into one function that returns HostAddress and TCGLabelQemuLdst structures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label, tcg_out_test_alignment,
and some code that lived in both tcg_out_qemu_ld and tcg_out_qemu_st
into one function that returns HostAddress and TCGLabelQemuLdst structures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label, tcg_out_test_alignment,
tcg_out_zext_addr_if_32_bit, and some code that lived in both
tcg_out_qemu_ld and tcg_out_qemu_st into one function that returns
HostAddress and TCGLabelQemuLdst structures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label, and some code that lived
in both tcg_out_qemu_ld and tcg_out_qemu_st into one function that
returns HostAddress and TCGLabelQemuLdst structures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label, tcg_out_test_alignment,
and some code that lived in both tcg_out_qemu_ld and tcg_out_qemu_st
into one function that returns HostAddress and TCGLabelQemuLdst structures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg/i386: Use indexed addressing for softmmu fast path
Since tcg_out_{ld,st}_helper_args, the slow path no longer requires
the address argument to be set up by the tlb load sequence. Use a
plain load for the addend and indexed addressing with the original
input address register.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tcg_out_tlb_load, add_qemu_ldst_label,
tcg_out_test_alignment, and some code that lived in both
tcg_out_qemu_ld and tcg_out_qemu_st into one function
that returns HostAddress and TCGLabelQemuLdst structures.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg/tcg-accel-ops-rr: ensure fairness with icount
The round-robin scheduler will iterate over the CPU list with an
assigned budget until the next timer expiry and may exit early because
of a TB exit. This is fine under normal operation but with icount
enabled and SMP it is possible for a CPU to be starved of run time and
the system live-locks.
For example, booting a riscv64 platform with '-icount
shift=0,align=off,sleep=on -smp 2' we observe a livelock once the kernel
has timers enabled and starts performing TLB shootdowns. In this case
we have CPU 0 in M-mode with interrupts disabled sending an IPI to CPU
1. As we enter the TCG loop, we assign the icount budget to next timer
interrupt to CPU 0 and begin executing where the guest is sat in a busy
loop exhausting all of the budget before we try to execute CPU 1 which
is the target of the IPI but CPU 1 is left with no budget with which to
execute and the process repeats.
We try here to add some fairness by splitting the budget across all of
the CPUs on the thread fairly before entering each one. The CPU count
is cached on CPU list generation ID to avoid iterating the list on each
loop iteration. With this change it is possible to boot an SMP rv64
guest with icount enabled and no hangs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jamie Iles <quic_jiles@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230427020925.51003-3-quic_jiles@quicinc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thomas Huth [Tue, 9 May 2023 16:27:48 +0000 (17:27 +0100)]
disas: Move disas.c into the target-independent source set
Use target_words_bigendian() instead of an ifdef.
Remove CONFIG_RISCV_DIS from the check for riscv as a host; this is
a poisoned identifier, and anyway will always be set by meson.build
when building on a riscv host.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230508133745.109463-3-thuth@redhat.com>
[rth: Type change done in a separate patch] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Thomas Huth [Tue, 9 May 2023 16:14:36 +0000 (17:14 +0100)]
disas: Move softmmu specific code to separate file
We'd like to move disas.c into the common code source set, where
CONFIG_USER_ONLY is not available anymore. So we have to move
the related code into a separate file instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230508133745.109463-2-thuth@redhat.com>
[rth: Type change done in a separate patch] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-83-richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-81-richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230503072331.1747057-80-richard.henderson@linaro.org>
Fix these before moving the file, for checkpatch.pl.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230510170812.663149-1-richard.henderson@linaro.org>
A copy-paste bug had us looking at the victim cache for writes.
Cc: qemu-stable@nongnu.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Fixes: 08dff435e2 ("tcg: Probe the proper permissions for atomic ops") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230505204049.352469-1-richard.henderson@linaro.org>
In this take 2:
- Change uint -> uint32_t to fix mingw32 compilation.
Please apply.
[take 1]
In this PULL request:
- 1st part of colo support for multifd (lukas)
- 1st part of disabling colo option (vladimir)
Please, apply.
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmRb3dgACgkQ9IfvGFhy
# 1yNLBxAAwHiAOdSPS7TqJXH2/PkBKsd42XMtWzC9UowZ6SUdQi0Q2bQUBnygJ8BA
# 59yLOTPdwUhaPWk4KsyKM2znOCJ+f9MF5V4QXbyILf1WCAq6d+mtPwArnYF1TRwi
# XIewVDeRopdOO5lnWGcfAKZZ5WIDzA/bn6NiGLi+pQa5HGyk84Bk+tFa8kJI6xBL
# 5CWfhNTcxDNYRFg/z/9YVirkuxIXEEL6VEeRFV+pmFuj05q9bysWJkLFoEcFNawO
# gp1foHDkU7wHmHDJ3D4AVTm3TW641ft1wdlHIHZRoOiIIu3EUOoDEVVsaCfdxrY8
# pPJZ5m37wb52GIaCJmigG8rkHxIJ8xKLk4HKu4umDqFq5jZQ2krnnj7AkQhpp7p2
# aEIOXJQQq7XCsKpuvSUIexPv4gbN5SEYKi7XKoOPe3sZ03Rkn0I5xY3KSyMQMamP
# jtk8tNlRA+9Wug82eb/FtIKDj3//4SbuQOJEdRXjKJBldd3mtWTT/FRj/8oo96/p
# hmTu/cGDrP5qgtWpz0kKI/xaBf8at1nwpDgdEzOjRw4zf6xQHFjbXgJ7tQBH/JUI
# T3A9pdiXN6QdRupcWUSV0iJsfS/5i3mOUTA/C529qGXabSnZzfMK+unL/I8N02yt
# 83o7jSg22etMjaS1c+VuDmzKCAfuZloDZv2Bms/+yM/8k8Xe5S4=
# =vbqf
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 07:09:28 PM BST
# gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [undefined]
# gpg: aka "Juan Quintela <quintela@trasno.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* tag 'migration-20230509-pull-request' of https://gitlab.com/juan.quintela/qemu:
migration: block incoming colo when capability is disabled
migration: disallow change capabilities in COLO state
migration: process_incoming_migration_co: simplify code flow around ret
migration: drop colo_incoming_thread from MigrationIncomingState
build: move COLO under CONFIG_REPLICATION
colo: make colo_checkpoint_notify static and provide simpler API
block/meson.build: prefer positive condition for replication
multifd: Add the ramblock to MultiFDRecvParams
ram: Let colo_flush_ram_cache take the bitmap_mutex
ram: Add public helper to set colo bitmap
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
migration: disallow change capabilities in COLO state
COLO is not listed as running state in migrate_is_running(), so, it's
theoretically possible to disable colo capability in COLO state and the
unexpected error in migration_iteration_finish() is reachable.
Let's disallow that in qmp_migrate_set_capabilities. Than the error
becomes absolutely unreachable: we can get into COLO state only with
enabled capability and can't disable it while we are in COLO state. So
substitute the error by simple assertion.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <20230428194928.1426370-10-vsementsov@yandex-team.ru> Signed-off-by: Juan Quintela <quintela@redhat.com>
We don't allow to use x-colo capability when replication is not
configured. So, no reason to build COLO when replication is disabled,
it's unusable in this case.
Note also that the check in migrate_caps_check() is not the only
restriction: some functions in migration/colo.c will just abort if
called with not defined CONFIG_REPLICATION, for example:
migration_iteration_finish()
case MIGRATION_STATUS_COLO:
migrate_start_colo_process()
colo_process_checkpoint()
abort()
It could probably make sense to have possibility to enable COLO without
REPLICATION, but this requires deeper audit of colo & replication code,
which may be done later if needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Acked-by: Dr. David Alan Gilbert <dave@treblig.org> Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230428194928.1426370-4-vsementsov@yandex-team.ru> Signed-off-by: Juan Quintela <quintela@redhat.com>
colo: make colo_checkpoint_notify static and provide simpler API
colo_checkpoint_notify() is mostly used in colo.c. Outside we use it
once when x-checkpoint-delay migration parameter is set. So, let's
simplify the external API to only that function - notify COLO that
parameter was set. This make external API more robust and hides
implementation details from external callers. Also this helps us to
make COLO module optional in further patch (i.e. we are going to add
possibility not build the COLO module).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20230428194928.1426370-3-vsementsov@yandex-team.ru> Signed-off-by: Juan Quintela <quintela@redhat.com>
Lukas Straub [Mon, 8 May 2023 19:10:55 +0000 (21:10 +0200)]
ram: Let colo_flush_ram_cache take the bitmap_mutex
This is not required, colo_flush_ram_cache does not run concurrently
with the multifd threads since the cache is only flushed after
everything has been received. But it makes me more comfortable.
This will be used in the next commits to add colo support to multifd.
Signed-off-by: Lukas Straub <lukasstraub2@web.de> Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <35cb23ba854151d38a31e3a5c8a1020e4283cb4a.1683572883.git.lukasstraub2@web.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
Merge tag 'pull-testing-updates-100523-1' of https://gitlab.com/stsquad/qemu into staging
Testing updates:
- fix up xtensa docker container base to current Debian
- document breakpoint and watchpoint support
- clean up the ansible scripts for Ubuntu 22.04
- add a minimal device profile
- drop https on mipsdistros URL
- fix Kconfig bug for XLNX_VERSAL
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmRbspsACgkQ+9DbCVqe
# KkSBowf+JjcVxZMb2kS8pV8WEdAq+fceBYI7mDBSEu0DFqZF+w0XSM+T+VZHyZ8+
# QmPeE+McKBUXvq/V4osPnDVVZfBKmwzFN548M6qIMLUbHjbDp94DtudNkAZ0ejhc
# +Ack73vzTiTWsGmBaqQxZlcYkZNZiZAhQsTF6cPwna74cDkcRghvd/Zxzy831rVB
# gVWhbEkk7SBQhJ+PqRIeso60DbWvCaVDMrkPc2WX8kup6QltbUpoayS/eNOtBkfA
# C557eOBxoM8s0cu33O780K5mCPCyk1IaIynvZtmkty0DXUSd5y9SNpsofhAY7BGy
# 4QdlolLygDgEC3s4bMULGy04nzaylw==
# =a+97
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 04:04:59 PM BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-updates-100523-1' of https://gitlab.com/stsquad/qemu:
hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machine
tests/avocado: use http for mipsdistros.mips.com
gitlab: enable minimal device profile for aarch64 --disable-tcg
gitlab: add ubuntu-22.04-aarch64-without-defaults
scripts/ci: clean-up the 20.04/22.04 confusion in ansible
scripts/ci: add gitlab-runner to kvm group
docs: document breakpoint and watchpoint support
tests/docker: bump the xtensa base to debian:11-slim
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fabiano Rosas [Wed, 3 May 2023 09:12:29 +0000 (10:12 +0100)]
hw/arm: Select XLNX_USB_SUBSYS for xlnx-zcu102 machine
This machine hardcodes initialization of the USB device, so select the
corresponding Kconfig. It is not enough to have it as "default y if
XLNX_VERSAL" at usb/Kconfig because building --without-default-devices
disables the default selection resulting in:
Alex Bennée [Tue, 2 May 2023 16:54:03 +0000 (17:54 +0100)]
tests/avocado: use http for mipsdistros.mips.com
As the cached assets have fallen out of our cache new attempts to
fetch these binaries fail hard due to certificate expiry. It's hard
to find a contact email for the domain as the root page of mipsdistros
throws up some random XML. I suspect Amazon are merely the hosts.
The checksums should protect us from any man-in-the-middle type
attacks.
Message-Id: <20230503091244.1450613-22-alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Alex Bennée [Tue, 2 May 2023 15:59:17 +0000 (16:59 +0100)]
gitlab: add ubuntu-22.04-aarch64-without-defaults
This does a very minimal build without default devices or features. I
chose the aarch64 runner as it doesn't count towards CI minutes and is
a fairly under-utilised builder.
Message-Id: <20230503091244.1450613-20-alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Tue, 2 May 2023 15:54:54 +0000 (16:54 +0100)]
scripts/ci: clean-up the 20.04/22.04 confusion in ansible
We have a bunch of references to 20.04 (which s390x is still on)
although we are basically building on 22.04 now. Clean up the textual
references and use lcitool to generate the full package list to be
consistent.
We can drop "Install packages to build QEMU on Ubuntu on non-s390x" as
when we upgrade the s390x builder to 22.04 it won't need this
workaround.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230503091244.1450613-19-alex.bennee@linaro.org>
Alex Bennée [Tue, 2 May 2023 15:11:50 +0000 (16:11 +0100)]
scripts/ci: add gitlab-runner to kvm group
One of the main reasons to have custom runners it so we can run KVM
tests. Enable the "kvm" additional group so we can access the feature
on the kernel.
Message-Id: <20230503091244.1450613-5-alex.bennee@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reported-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Tue, 2 May 2023 14:23:50 +0000 (15:23 +0100)]
docs: document breakpoint and watchpoint support
This varies by accelerator. Also mention the modern bear trap that is
ASLR.
Message-Id: <20230503091244.1450613-4-alex.bennee@linaro.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Alex Bennée [Tue, 2 May 2023 14:20:59 +0000 (15:20 +0100)]
tests/docker: bump the xtensa base to debian:11-slim
Stretch is going out of support so things like security updates will
fail. As the toolchain itself is binary it hopefully won't mind the
underlying OS being updated.
Message-Id: <20230503091244.1450613-3-alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reported-by: Richard Henderson <richard.henderson@linaro.org>
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- Graph locking, part 3 (more block drivers)
- Compile out assert_bdrv_graph_readable() by default
- Add configure options for vmdk, vhdx and vpc
- Fix use after free in blockdev_mark_auto_del()
- migration: Attempt disk reactivation in more failure scenarios
- Coroutine correctness fixes
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (28 commits)
block: compile out assert_bdrv_graph_readable() by default
block: Mark bdrv_refresh_limits() and callers GRAPH_RDLOCK
block: Mark bdrv_recurse_can_replace() and callers GRAPH_RDLOCK
block: Mark bdrv_query_block_graph_info() and callers GRAPH_RDLOCK
block: Mark bdrv_query_bds_stats() and callers GRAPH_RDLOCK
block: Mark BlockDriver callbacks for amend job GRAPH_RDLOCK
block: Mark bdrv_co_debug_event() GRAPH_RDLOCK
block: Mark bdrv_co_get_info() and callers GRAPH_RDLOCK
block: Mark bdrv_co_get_allocated_file_size() and callers GRAPH_RDLOCK
mirror: Require GRAPH_RDLOCK for accessing a node's parent list
vhdx: Require GRAPH_RDLOCK for accessing a node's parent list
nbd: Mark nbd_co_do_establish_connection() and callers GRAPH_RDLOCK
nbd: Remove nbd_co_flush() wrapper function
block: .bdrv_open is non-coroutine and unlocked
graph-lock: Fix GRAPH_RDLOCK_GUARD*() to be reader lock
graph-lock: Add GRAPH_UNLOCKED(_PTR)
test-bdrv-drain: Don't modify the graph in coroutines
iotests: Test resizing image attached to an iothread
block: Don't call no_coroutine_fns in qmp_block_resize()
block: bdrv/blk_co_unref() for calls in coroutine context
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Stefan Hajnoczi [Mon, 1 May 2023 17:34:43 +0000 (13:34 -0400)]
block: compile out assert_bdrv_graph_readable() by default
reader_count() is a performance bottleneck because the global
aio_context_list_lock mutex causes thread contention. Put this debugging
assertion behind a new ./configure --enable-debug-graph-lock option and
disable it by default.
The --enable-debug-graph-lock option is also enabled by the more general
--enable-debug option.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230501173443.153062-1-stefanha@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:50 +0000 (13:57 +0200)]
block: Mark bdrv_refresh_limits() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_refresh_limits() need to hold a reader lock for the graph because
it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-21-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:49 +0000 (13:57 +0200)]
block: Mark bdrv_recurse_can_replace() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_recurse_can_replace() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-20-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:48 +0000 (13:57 +0200)]
block: Mark bdrv_query_block_graph_info() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_query_block_graph_info() need to hold a reader lock for the graph
because it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-19-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:47 +0000 (13:57 +0200)]
block: Mark bdrv_query_bds_stats() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_query_bds_stats() need to hold a reader lock for the graph because
it accesses the children list of a node.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-18-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block: Mark BlockDriver callbacks for amend job GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of amend
callbacks in BlockDriver need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-17-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_debug_event() need to hold a reader lock for the graph.
Unfortunately we cannot use a co_wrapper_bdrv_rdlock (i.e. make the
coroutine wrapper a no_coroutine_fn), because the function is called
(using the BLKDBG_EVENT macro) by mixed functions that run both in
coroutine and non-coroutine context (for example many of the functions
in qcow2-cluster.c and qcow2-refcount.c).
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-16-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block: Mark bdrv_co_get_info() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_get_info() need to hold a reader lock for the graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-15-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
block: Mark bdrv_co_get_allocated_file_size() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
bdrv_co_get_allocated_file_size() need to hold a reader lock for the
graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-14-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:42 +0000 (13:57 +0200)]
mirror: Require GRAPH_RDLOCK for accessing a node's parent list
This adds GRAPH_RDLOCK annotations to declare that functions accessing
the parent list of a node need to hold a reader lock for the graph. As
it happens, they already do.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230504115750.54437-13-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:41 +0000 (13:57 +0200)]
vhdx: Require GRAPH_RDLOCK for accessing a node's parent list
This adds GRAPH_RDLOCK annotations to declare that functions accessing
the parent list of a node need to hold a reader lock for the graph. As
it happens, they already do.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-12-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
nbd: Mark nbd_co_do_establish_connection() and callers GRAPH_RDLOCK
This adds GRAPH_RDLOCK annotations to declare that callers of
nbd_co_do_establish_connection() need to hold a reader lock for the
graph.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-11-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:39 +0000 (13:57 +0200)]
nbd: Remove nbd_co_flush() wrapper function
The only thing nbd_co_flush() does is call nbd_client_co_flush(). Just
use that function directly in the BlockDriver definitions and remove the
wrapper.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-10-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:38 +0000 (13:57 +0200)]
block: .bdrv_open is non-coroutine and unlocked
Drivers were a bit confused about whether .bdrv_open can run in a
coroutine and whether or not it holds a graph lock.
It cannot keep a graph lock from the caller across the whole function
because it both changes the graph (requires a writer lock) and does I/O
(requires a reader lock). Therefore, it should take these locks
internally as needed.
The functions used to be called in coroutine context during image
creation. This was buggy for other reasons, and as of commit 32192301,
all block drivers go through no_co_wrappers. So it is not called in
coroutine context any more.
Fix qcow2 and qed to work with the correct assumptions: The graph lock
needs to be taken internally instead of just assuming it's already
there, and the coroutine path is dead code that can be removed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-9-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:37 +0000 (13:57 +0200)]
graph-lock: Fix GRAPH_RDLOCK_GUARD*() to be reader lock
GRAPH_RDLOCK_GUARD() and GRAPH_RDLOCK_GUARD_MAINLOOP() only take a
reader lock for the graph, so the correct annotation for them to use is
TSA_ASSERT_SHARED rather than TSA_ASSERT.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-8-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:36 +0000 (13:57 +0200)]
graph-lock: Add GRAPH_UNLOCKED(_PTR)
For some functions, it is part of their interface to be called without
holding the graph lock. Add a new macro to document this.
The macro expands to TSA_EXCLUDES(), which is a relatively weak check
because it passes in cases where the compiler just doesn't know if the
lock is held. Function pointers can't be checked at all. Therefore, its
primary purpose is documentation.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-7-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:35 +0000 (13:57 +0200)]
test-bdrv-drain: Don't modify the graph in coroutines
test-bdrv-drain contains a few test cases that are run both in coroutine
and non-coroutine context. Running the entire code including the setup
and shutdown in coroutines is incorrect because graph modifications can
generally not happen in coroutines.
Change the test so that creating and destroying the test nodes and
BlockBackends always happens outside of coroutine context.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20230504115750.54437-6-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 9 May 2023 13:41:33 +0000 (15:41 +0200)]
iotests: Test resizing image attached to an iothread
This tests that trying to resize an image with QMP block_resize doesn't
hang or otherwise fail when the image is attached to a device running in
an iothread.
This is a regression test for the recent fix that changed
qmp_block_resize, which is a coroutine based QMP handler, to avoid
calling no_coroutine_fns directly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20230509134133.373408-1-kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:34 +0000 (13:57 +0200)]
block: Don't call no_coroutine_fns in qmp_block_resize()
This QMP handler runs in a coroutine, so it must use the corresponding
no_co_wrappers instead.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2185688 Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-5-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2023 11:57:33 +0000 (13:57 +0200)]
block: bdrv/blk_co_unref() for calls in coroutine context
These functions must not be called in coroutine context, because they
need write access to the graph.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-4-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Migration code can call bdrv_activate() in coroutine context, whereas
other callers call it outside of coroutines. As it calls other code that
is not supposed to run in coroutines, standardise on running outside of
coroutines.
This adds a no_co_wrapper to switch to the main loop before calling
bdrv_activate().
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230504115750.54437-3-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
projects / qemu-xen.git / log