Olaf Hering [Mon, 3 May 2021 10:56:11 +0000 (12:56 +0200)]
libxl: remove obsolete check for result of xc_get_max_cpus
xc_get_max_cpus from Xen version 4.3 may return 0 in case xc_physinfo
fails. This has been fixed in Xen 4.4. Remove the obsolete result check
from libvirt. Just convert libxl error codes to plain -1.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Peter Krempa [Mon, 19 Apr 2021 10:56:12 +0000 (12:56 +0200)]
qemu: capabilities: Fix detection of 'vmport'
'query-commandline-options' never returned 'vmport' but we can detect it
in the list of supported object types. This removes it from all non-x86
originating test data as it's platform specific.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Thu, 8 Apr 2021 15:23:48 +0000 (17:23 +0200)]
qemu: capabilities: Probe QMP schema before probing commands
All supported QEMU versions now support query-qmp-schema. In the future
it will be possible to use the output of query-qmp-schema to also detect
commands reliably.
Since we are at the point where we have the least amount of .replies
files needing changing for a long time, move the 'query-qmp-schema' bits
before 'query-commands' to prepare for the future.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Fri, 9 Apr 2021 13:59:42 +0000 (15:59 +0200)]
qemuhotplugtest: Add also always-present capabilities
Use virQEMUCapsInitQMPBasicArch in qemuHotplugCreateObjects so that we
also add the always-present capabilities to the set of capabilities used
for the hotplug test and fix fallout.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Tue, 30 Mar 2021 15:48:46 +0000 (17:48 +0200)]
qemu: capabilities: Move setting QEMU_CAPS_DEVICE_VIDEO_PRIMARY to virQEMUCapsInitQMPBasicArch
Until we clean up and remove all capabilities which no longer make sense
to have separately, we should use virQEMUCapsInitQMPBasicArch to set the
defaults as it's used by qemuxml2argvtest when testing with fake
capabilities.
This allows us to prevent testing dead code paths with the fake
capability tests.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Tue, 30 Mar 2021 15:24:26 +0000 (17:24 +0200)]
qemu: capabilities: Move setting of QEMU_CAPS_MACH_VIRT_GIC_VERSION to virQEMUCapsInitQMPBasicArch
Move it under AARCH 64, since it's a platform specific feature, thus it
will be removed from all other platforms.
Since virQEMUCapsInitQMPBasicArch is used in qemuxml2argv test to
initiate qemuCaps for tests with fake capabilities, all the tests gain
GIC support now.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Tue, 30 Mar 2021 15:15:06 +0000 (17:15 +0200)]
qemu: capabilities: Move setting of PPC specific flags to virQEMUCapsInitQMPBasicArch
QEMU_CAPS_MACHINE_PSERIES_RESIZE_HPT and
QEMU_CAPS_MACHINE_PSERIES_MAX_CPU_COMPAT are now always asserted on PPC
machine types, move them to virQEMUCapsInitQMPBasicArch.
It's now always set for AARCH64, move it into the function setting basic
caps for the emulator.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Tue, 30 Mar 2021 13:13:35 +0000 (15:13 +0200)]
virQEMUCapsInitProcessCaps: Remove obsolete version checks
We no longer have to mask out IOMMU and NVDIMM support as we no longer
support the broken qemu versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The qemuCaps is left for the device commandline formatters for now as it
might come in handy.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Tue, 30 Mar 2021 13:09:27 +0000 (15:09 +0200)]
virQEMUCapsHasPCIMultiBus: Remove logic for PPC multibus support check
All machine types which have PCI support multibus since qemu 2.0
according to the logic we had, thus we can remove all the machine type
and version checks which are now dead code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Fri, 26 Mar 2021 16:24:24 +0000 (17:24 +0100)]
qemucapabilitiesdata: Drop capability test data for qemu < 2.11
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Tue, 30 Mar 2021 13:51:53 +0000 (15:51 +0200)]
qemuxml2xmltest: Remove versioned tests for qemu < 2.11
Drop all the cases pinned to unsupported versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Tue, 30 Mar 2021 13:51:53 +0000 (15:51 +0200)]
qemuxml2argvtest: Remove versioned tests for qemu < 2.11
Drop all the cases pinned to unsupported versions.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Michal Privoznik [Fri, 30 Apr 2021 05:10:41 +0000 (07:10 +0200)]
meson: Declare GLIB_VERSION_* macros at configure
So far we have three places where glib version is recorded:
meson.build and then in config.h. The latter is so well hidden
that it's easy to miss when bumping minimal glib version in the
former. With a bit of python^Wmeson string magic
GLIB_VERSION_MIN_REQUIRED and GLIB_VERSION_MAX_ALLOWED macros can
be defined to match glib_version from meson.build.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Michal Privoznik [Fri, 30 Apr 2021 05:07:57 +0000 (07:07 +0200)]
qemu_domainjob: Drop 'const' from strings in _qemuDomainJobObj
These strings are not constant really. They are allocated in
qemuDomainObjBeginJobInternal() and freed in
qemuDomainReset*Job(). Freeing a pointer to const looks weird.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Tim Wiederhake [Tue, 27 Apr 2021 11:12:57 +0000 (13:12 +0200)]
virDomainAudioSDLParse: Use virXMLProp*
This strictens the parser to disallow negative values (interpreted as
`UINT_MAX + value + 1`) for attribute `bufferCount`.
`bufferCount` does not benefit from being referable as e.g. "-7" for
requesting 4294967289 buffers, as this value is distinctly out of range
for normal use.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
Tim Wiederhake [Tue, 27 Apr 2021 11:12:54 +0000 (13:12 +0200)]
virDomainFeaturesDefParse: Use virXMLPropUInt
This strictens the parser to disallow negative values (interpreted as
`UINT_MAX + value + 1`) for attribute `retries`. UINT_MAX holds no
special significance for this attribute and is distinctly out of range
for normal use.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
Tim Wiederhake [Tue, 27 Apr 2021 11:12:53 +0000 (13:12 +0200)]
virDomainSoundDefParseXML: Use virXMLProp*
This strictens the parser to disallow negative values (interpreted as
`UINT_MAX + value + 1`) for attribute `id`.
`id` must be greater than 0 and does not benefit from being referable as
e.g. "-7" for host audio backend 4294967289, as this value is distinctly
out of range for normal use.
Additionally, this patch fixes a use of NULL string with printf's %s
modifier if the `model` attribute is absent.
Signed-off-by: Tim Wiederhake <twiederh@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
virnetdevbridge: Ignore EEXIST when adding an entry to fdb
When updating entries in a bridge forwarding database (i.e., when
macTableManager='libvirt' is configured for the bridge), we may end up
in a situation when the entry we want to add is already present. Let's
just ignore the error in such a case.
This fixes an error to resume a domain when fdb entries were not
properly removed when the domain was paused:
virsh # resume test
error: Failed to resume domain test
error: error adding fdb entry for vnet2: File exists
For some reason, fdb entries are only removed when libvirt explicitly
stops CPUs, but nothing happens when we just get STOP event from QEMU.
An alternative approach would be to make sure we always remove the
entries regardless on why a domain was paused (e.g., during migration),
but that would be a significantly more disruptive change with possible
side effects.
VIR_EXPAND_N has these two extra effects apart from reallocating memory:
1) The newly allocated memory is zeroed out
2) The number of elements in the array which is passed to VIR_EXPAND_N
is increased.
This comes into play when used with virDomainLeaseInsertPreAlloced,
which expects that the array element count already includes the space
for the added 'lease', by plainly just assigning to
'leases[nleases - 1]'
Since g_renew does not increase the number of elements in the array
any existing code which calls virDomainLeaseInsertPreAlloced thus either
overwrites a lease definition or corrupts the heap if there are no
leases to start with.
To preserve existing functionality we revert the code back to using
VIR_EXPAND_N which at this point doesn't return any value, so other
commits don't need to be reverted.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1953577 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
virCommandRun() already handles the case where the cmd argument is NULL,
so there's no need for the caller to check. Make all callers consistent
and remove unnecessary NULL checks.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Coverity complained that the 'default' case of the switch in
nodeDeviceGetMdevctlCommand() was falling through without initializing
'cmd'. Return NULL in this case even though it should never happen.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Tue, 20 Apr 2021 14:34:02 +0000 (16:34 +0200)]
qemuBlockJobRefreshJobs: Replace qemuMonitorJobCancel by qemuMonitorBlockJobCancel
We want to unify on one block job cancellation API. Use
qemuMonitorBlockJobCancel which has more features.
In case of job refresh, we are killing off any unknown jobs so we don't
care about their fate.
Another difference is that an possible error from the block job
cancellation might be reported, but we don't really care here ince
it's a very unlikely scenario and we also report a warning.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Wed, 21 Apr 2021 13:47:59 +0000 (15:47 +0200)]
qemuDomainBlockJobAbort: Don't use 'job-cancel' instead of 'block-job-cancel'
'block-job-cancel' has one very important semantic difference to
'job-cancel', docummented in qemu as:
Note that if you issue 'block-job-cancel' after 'drive-mirror' has indicated
(via the event BLOCK_JOB_READY) that the source and destination are
synchronized, then the event triggered by this command changes to
BLOCK_JOB_COMPLETED, to indicate that the mirroring has ended and the
destination now has a point-in-time copy tied to the time of the cancellation.
Since libvirt advertises the block copy job as having the synchronous
abort feature we must not use 'job-cancel' here.
Fixes: 4817b5ca1d0 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
projects / libvirt.git / log