Then each case was manually reviewed, and a comment was added
indicating what's unusual about those type checking
macros/functions. Despite not following the usual pattern, the
changes in this patch were found to be safe.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200831210740.126168-15-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Eduardo Habkost [Mon, 31 Aug 2020 21:07:28 +0000 (17:07 -0400)]
codeconverter: script for automating QOM code cleanups
This started as a simple script that scanned for regular
expressions, but became more and more complex when exceptions to
the rules were found.
I don't know if this should be maintained in the QEMU source tree
long term (maybe it can be reused for other code transformations
that Coccinelle can't handle). In either case, this is included
as part of the patch series to document how exactly the automated
code transformations in the next patches were done.
Eduardo Habkost [Mon, 31 Aug 2020 21:07:27 +0000 (17:07 -0400)]
qom: Make type checker functions accept const pointers
The existing type check macros all unconditionally drop const
qualifiers from their arguments. Keep this behavior in the
macros generated by DECLARE_*CHECKER* by now.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200831210740.126168-6-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Mon, 31 Aug 2020 21:07:26 +0000 (17:07 -0400)]
qom: DECLARE_*_CHECKERS macros
Sometimes the typedefs are buried inside another header, but
we want to benefit from the automatic definition of type cast
functions. Introduce macros that will let type checkers be
defined when typedefs are already available.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200831210740.126168-5-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Eduardo Habkost [Mon, 31 Aug 2020 21:07:25 +0000 (17:07 -0400)]
qom: Allow class type name to be specified in OBJECT_DECLARE*
Many QOM types don't follow the Type/TypeClass pattern
on the instance/struct names. Let the class struct name
be specified in the OBJECT_DECLARE* macros.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200831210740.126168-4-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
qom: provide convenient macros for declaring and defining types
When creating new QOM types, there is a lot of boilerplate code that
must be repeated using a standard pattern. This is tedious to write
and liable to suffer from subtle inconsistencies. Thus it would
benefit from some simple automation.
QOM was loosely inspired by GLib's GObject, and indeed GObject suffers
from the same burden of boilerplate code, but has long provided a set of
macros to eliminate this burden in the source implementation. More
recently it has also provided a set of macros to eliminate this burden
in the header declaration.
In GLib there are the G_DECLARE_* and G_DEFINE_* family of macros
for the header declaration and source implementation respectively:
Note that these macros are including support for g_autoptr() for the
object types, which is something previously only supported for variables
declared as the base Object * type.
IOW, in both cases the maintainer now only has to think about the
interesting part of the code which implements useful functionality
and avoids much of the boilerplate.
qom: make object_ref/unref use a void * instead of Object *.
The object_ref/unref methods are intended for use with any subclass of
the base Object. Using "Object *" in the signature is not adding any
meaningful level of type safety, since callers simply use "OBJECT(ptr)"
and this expands to an unchecked cast "(Object *)".
By using "void *" we enable the object_unref() method to be used to
provide support for g_autoptr() with any subclass.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200723181410.3145233-2-berrange@redhat.com>
Message-Id: <20200831210740.126168-2-ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Tue, 8 Sep 2020 15:18:48 +0000 (16:18 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.2-20200908' into staging
ppc patch queue 2020-09-08
This supersedes ppc-for-5.2-20200904, it fixes a couple of bugs in
that PR and adds a few extra patches.
Next pull request for qemu-5.2. The biggest thing here is the
generalization of ARM's start-powered-off machine property to all
targets. This can fix a number of odd little edge cases where KVM
could run vcpus before they were properly initialized. This does
include changes to a number of files that aren't normally in my
purview. There are suitable Acked-by lines and Peter requested this
come in via my tree, since the most pressing requirement for it is in
pseries machines with the POWER secure virtual machine facility.
In addition we have:
* Daniel Barboza's rework and clean up of pseries machine NUMA handling
* Correction to behaviour of the nvdimm= generic machine property on
pseries
* An optimization to the allocation of XIVE interrupts on KVM
* Some fixes for confused behaviour with kernel_irqchip when both
XICS and XIVE are in play
* Add HIOMAP comamnd to pnv flash
* Properly advertise the fact that spapr_vscsi doesn't handle
hotplugged disks
* Some assorted minor enhancements
* remotes/dgibson/tags/ppc-for-5.2-20200908: (33 commits)
spapr_numa: use spapr_numa_get_vcpu_assoc() in home_node hcall
spapr_numa: create a vcpu associativity helper
spapr: move h_home_node_associativity to spapr_numa.c
spapr_numa: move NVLink2 associativity handling to spapr_numa.c
spapr, spapr_numa: move lookup-arrays handling to spapr_numa.c
spapr, spapr_numa: handle vcpu ibm,associativity
spapr: introduce SpaprMachineState::numa_assoc_array
ppc/spapr_nvdimm: turn spapr_dt_nvdimm() static
ppc: introducing spapr_numa.c NUMA code helper
hw/ppc/ppc4xx_pci: Replace pointless warning by assert()
hw/ppc/ppc4xx_pci: Use ARRAY_SIZE() instead of magic value
target/s390x: Use start-powered-off CPUState property
sparc/sun4m: Use start-powered-off CPUState property
sparc/sun4m: Don't set cs->halted = 0 in main_cpu_reset()
mips/cps: Use start-powered-off CPUState property
ppc/e500: Use start-powered-off CPUState property
ppc/spapr: Use start-powered-off CPUState property
target/arm: Move setting of CPU halted state to generic code
target/arm: Move start-powered-off property to generic CPUState
ppc/spapr_nvdimm: do not enable support with 'nvdimm=off'
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/rth/tags/pull-mb-20200907-2:
configure: Do not set TARGET_ABI32 for microblaze
target/microblaze: Put MicroBlazeCPUConfig into DisasContext
target/microblaze: Fill in VMStateDescription for cpu
target/microblaze: Move mmu parameters to MicroBlazeCPUConfig
target/microblaze: Treat pvr_regs as constant
target/microblaze: Move pvr regs to MicroBlazeCPUConfig
target/microblaze: Reorg MicroBlazeCPUConfig to minimize holes
target/microblaze: Split out MicroBlazeCPUConfig
target/microblaze: Diagnose invalid insns in delay slots
target/microblaze: Use tcg_gen_lookup_and_goto_ptr
target/microblaze: Force rtid, rted, rtbd to exit
target/microblaze: Handle DISAS_EXIT_NEXT in delay slot
target/microblaze: Replace cpustate_changed with DISAS_EXIT_NEXT
target/microblaze: Introduce DISAS_EXIT_NEXT, DISAS_EXIT_JUMP
target/microblaze: Rename DISAS_UPDATE to DISAS_EXIT
target/microblaze: Rename mmu structs
target/microblaze: Cleanup mb_cpu_do_interrupt
target/microblaze: Renumber D_FLAG
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini-gitlab/tags/for-upstream: (45 commits)
docs: update build system documentation
meson: remove linkage of sdl to baum
meson: Convert undefsym.sh to undefsym.py
fuzz: Add support for custom fuzzing library
meson: specify fuzz linker script as a project arg
oss-fuzz: fix rpath
configure: update dtc submodule
docs: suggest Meson replacements for various configure functions
configure: drop dead variables and functions
configure: do not include dependency flags in QEMU_CFLAGS and LIBS
meson: get opengl compilation flags from OPENGL_CFLAGS
meson: get glib compilation flags from GLIB_CFLAGS
configure: do not look for install(1)
configure: remove unnecessary libm test
configure: move -ldl test to meson
meson: keep all compiler flags detection together
configure: move disassembler configuration to meson
Makefile: inline the relevant parts of rules.mak
Makefile: remove dead variables and includes
meson: compute config_all_devices directly
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bruce Rogers [Thu, 3 Sep 2020 15:29:33 +0000 (09:29 -0600)]
meson: remove linkage of sdl to baum
Ever since commit 537fe2d63f744e7c96ff45b60d09486a81958e06 there
has been a 'linkage' to sdl for compiling baum.c. Originally it
had to do with including sdl cflags for any file including sdl
headers. There is no longer any such need for baum.c, but the
association has persisted in the make system, and with the switch
to meson it has now become a hard requirement, which now causes
chardev-baum.so to not be produced if sdl is not configured.
Remove this bogus linkage.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Message-Id: <20200903152933.97838-1-brogers@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yonggang Luo [Wed, 2 Sep 2020 17:00:50 +0000 (01:00 +0800)]
meson: Convert undefsym.sh to undefsym.py
Shell scripts are not easily invoked from the build process
on MSYS, so convert undefsym.sh to a python script.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200902170054.810-3-luoyonggang@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On oss-fuzz, we must use the LIB_FUZZING_ENGINE and CFLAGS environment
variables, rather than -fsanitize=fuzzer. With this change, when
LIB_FUZZING_ENGINE is set, the --enable-fuzzing configure option will
use that environment variable during the linking stage, rather than
-fsanitize=fuzzer
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902173652.307222-3-alxndr@bu.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
meson: specify fuzz linker script as a project arg
With this change, the fuzzer-linker script should be specified outside
any --start-group/--end-group pairs. We need this on oss-fuzz, where
partially applying the linker-script results in a linker failure
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902173652.307222-2-alxndr@bu.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Prior to this change,
readelf -d build/out/qemu/qemu-fuzz-i386-target-virtio-net-slirp
...
0x000000000000000f (RPATH) Library rpath: ['$$ORIGIN/lib':$ORIGIN/migration:$ORIGIN/]
As of 1a4db552d8 ("ninjatool: quote dollars in variables"), we don't
need to manually double the dollars. Also, remove the single-quotes as
they are copied into the rpath.
After this change:
0x000000000000000f (RPATH) Library rpath: [$ORIGIN/lib:$ORIGIN/migration:$ORIGIN/]
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200902142657.112879-3-alxndr@bu.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Yonggang Luo [Wed, 2 Sep 2020 17:00:49 +0000 (01:00 +0800)]
configure: update dtc submodule
Update the dtc submodule in configure already and symlink dtc after
git submodule update, because on win32 symlinks to non-existing folders
are forbidden.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200902170054.810-2-luoyonggang@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Sep 2020 10:15:41 +0000 (06:15 -0400)]
configure: do not include dependency flags in QEMU_CFLAGS and LIBS
All Meson executables should specify their dependencies explicitly, either
directly or indirectly via declare_dependency. Makefiles instead did
not propagate dependencies correctly from static libraries, for example.
Therefore, flags for dependencies need not be included in QEMU_CFLAGS.
LIBS is not used at all, so drop that one as well.
In a few cases the dependencies were not yet specified, so add them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Sep 2020 12:41:17 +0000 (08:41 -0400)]
meson: get opengl compilation flags from OPENGL_CFLAGS
The opengl compilation flags were added to QEMU_CFLAGS. We do not
want them to be added to all compilation commands, so export them
also via OPENGL_CFLAGS rather than via QEMU_CFLAGS.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Sep 2020 12:41:17 +0000 (08:41 -0400)]
meson: get glib compilation flags from GLIB_CFLAGS
The glib compilation flags were added to QEMU_CFLAGS. While we still
want them to be added to all compilation commands (at least for now),
do that via GLIB_CFLAGS rather than via QEMU_CFLAGS. This shows that
glib is a special case and makes it clearer that QEMU_CFLAGS is only
about compiler commands and not dependencies.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Sep 2020 09:31:46 +0000 (05:31 -0400)]
Makefile: remove dead variables and includes
Makefile.objs, the .d files and various CONFIG_* symbols are not
used anymore by the Make side of the build; they are only processed
by Meson. We can delete them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 2 Sep 2020 10:30:40 +0000 (06:30 -0400)]
meson: fix libqos linking
Add genh to the sources to avoid race conditions between QAPI
file generation and libqos compilation.
Make the name_suffix .fa for consistency with other link_whole
static libraries and to work around a Meson issue where
lots of linker flags are placed between -Wl,--start-group and
-Wl,--end-group and this breaks the fork-fuzz.ld linker script.
Reported-by: Claudio Fontana <cfontana@suse.de> Reported-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Sep 2020 11:13:16 +0000 (07:13 -0400)]
ninjatool: use constant names for stamp files
Numbering files according to rules causes confusion, because
CUSTOM_COMMAND3.stamp from a previous build might represent
completely different targets after Makefile.ninja is regenerated.
As a result, the new targets are not rebuilt and compilation
fails.
Use the targets to build a SHA1 hash; the chances for collision
are one in 2^24 even with a 12-character prefix of the hash.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 2 Sep 2020 11:57:30 +0000 (07:57 -0400)]
configure: do not include absolute paths in -I and -L paths
On msys2, paths such as -L/e/path/to/qemu are not recognized by
the linker. Fortunately we do not need absolute paths at all in a
non-recursive build system.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Sep 2020 16:48:00 +0000 (12:48 -0400)]
meson: remove b_lundef option
Meson automatically adds "-undefined dynamic_lookup" to
shared_module build targets; b_lundef is only needed for
executables. Therefore, we can remove this option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Wed, 2 Sep 2020 11:19:43 +0000 (07:19 -0400)]
mtest2make: unify tests that appear in multiple suites
Whenever a test appears in multiple suites, the rules generated
by mtest2make are currently running it twice. Instead, after
this patch we generate a phony target for each test and we have
a generic "run-tests" target depend on all the tests that were
chosen on the command line. Tests that appear in multiple suites
will be added to the prerequisites just once.
This has other advantages: it removes the handling of -k and
it increases parallelism.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Sep 2020 13:14:41 +0000 (09:14 -0400)]
mtest2make: hide output of successful tests
The softfloat tests are quite noisy; before the Meson conversion
they buffered the output in a file and emitted the output only
if the test failed. Tweak mtest2make.py so that the courtesy
is extended to all non-TAP tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 1 Sep 2020 13:31:56 +0000 (09:31 -0400)]
qemu-iotests: move check-block back to Makefiles
check-block has its own test harness, unlike every other test. If
we capture its output, as is in general nicer to do without V=1,
there will be no sign of progress. So for lack of a better option
just move the invocation of the test back to Makefile rules.
As a side effect, this will also fix "make check" in --disable-tools
builds, as they were trying to run qemu-iotests without having
made qemu-img before.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
spapr_numa: use spapr_numa_get_vcpu_assoc() in home_node hcall
The current implementation of h_home_node_associativity hard codes
the values of associativity domains of the vcpus. Let's make
it consider the values already initialized in spapr->numa_assoc_array,
via the spapr_numa_get_vcpu_assoc() helper.
We want to set it and forget it, and for that we also need to
assert that we don't overflow the registers of the hypercall.
>From R4 to R9 we can squeeze in 12 associativity domains for
vcpus, so let's assert that VCPU_ASSOC_SIZE -1 isn't greater
than that.
Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200904172422.617460-4-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The work to be done in h_home_node_associativity() intersects
with what is already done in spapr_numa_fixup_cpu_dt(). This
patch creates a new helper, spapr_numa_get_vcpu_assoc(), to
be used for both spapr_numa_fixup_cpu_dt() and
h_home_node_associativity().
While we're at it, use memcpy() instead of loop assignment
to created the returned array.
Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200904172422.617460-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr: move h_home_node_associativity to spapr_numa.c
The implementation of this hypercall will be modified to use
spapr->numa_assoc_arrays input. Moving it to spapr_numa.c makes
make more sense.
Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200904172422.617460-2-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr, spapr_numa: move lookup-arrays handling to spapr_numa.c
In a similar fashion as the previous patch, let's move the
handling of ibm,associativity-lookup-arrays from spapr.c to
spapr_numa.c. A spapr_numa_write_assoc_lookup_arrays() helper was
created, and spapr_dt_dynamic_reconfiguration_memory() can now
use it to advertise the lookup-arrays.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-4-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Vcpus have an additional paramenter to be appended, vcpu_id. This
also changes the size of the of property itself, which is being
represented in index 0 of numa_assoc_array[cpu->node_id],
and defaults to MAX_DISTANCE_REF_POINTS for all cases but
vcpus.
All this logic makes more sense in spapr_numa.c, where we handle
everything NUMA and associativity. A new helper spapr_numa_fixup_cpu_dt()
was added, and spapr.c uses it the same way as it was using the former
spapr_fixup_cpu_numa_dt().
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-3-danielhb413@gmail.com>
[dwg: Correct uint to int type, which can break windows builds] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The next step to centralize all NUMA/associativity handling in
the spapr machine is to create a 'one stop place' for all
things ibm,associativity.
This patch introduces numa_assoc_array, a 2 dimensional array
that will store all ibm,associativity arrays of all NUMA nodes.
This array is initialized in a new spapr_numa_associativity_init()
function, called in spapr_machine_init(). It is being initialized
with the same values used in other ibm,associativity properties
around spapr files (i.e. all zeros, last value is node_id).
The idea is to remove all hardcoded definitions and FDT writes
of ibm,associativity arrays, doing instead a call to the new
helper spapr_numa_write_associativity_dt() helper, that will
be able to write the DT with the correct values.
We'll start small, handling the trivial cases first. The
remaining instances of ibm,associativity will be handled
next.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200903220639.563090-2-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We're going to make changes in how spapr handles all
ibm,associativity* related properties to enhance our current NUMA
support.
At this moment we have associativity code scattered all around
spapr_* files, with hardcoded values and array sizes. This
makes it harder to change any NUMA specific parameters in
the future. Having everything in the same place allows not
only for easier tuning, but also easier understanding since all
NUMA related code is on the same file.
This patch introduces a new file to gather all NUMA/associativity
handling code in spapr, spapr_numa.c. To get things started, let's
remove associativity-reference-points and max-associativity-domains
code from spapr_dt_rtas() to a new helper called spapr_numa_write_rtas_dt().
This will decouple spapr_dt_rtas() from the NUMA changes that
are going to happen in those two properties.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200901125645.118026-2-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
hw/ppc/ppc4xx_pci: Replace pointless warning by assert()
We call pci_register_root_bus() to register 4 IRQs with the
ppc4xx_pci_set_irq() handler. As it can only be called with
values in the [0-4[ range, replace the pointless warning by
an assert().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200901104043.91383-5-f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
hw/ppc/ppc4xx_pci: Use ARRAY_SIZE() instead of magic value
Replace the magic '4' by ARRAY_SIZE(s->irq) which is more explicit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200901104043.91383-4-f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
target/s390x: Use start-powered-off CPUState property
Instead of setting CPUState::halted to 1 in s390_cpu_initfn(), use the
start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.
Note that this changes behavior by setting cs->halted to 1 on reset, which
didn't happen before.
Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-9-bauerman@linux.ibm.com>
[dwg: Fix from Laurent Vivier for user only case] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
sparc/sun4m: Use start-powered-off CPUState property
Instead of setting CPUState::halted to 1 in secondary_cpu_reset(), use the
start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.
Now secondary_cpu_reset() becomes equivalent to main_cpu_reset() so rename
the function to sun4m_cpu_reset().
Also remove setting of cs->halted from cpu_devinit(), which seems out of
place when compared to similar code in other architectures (e.g.,
ppce500_init() in hw/ppc/e500.c).
Finally, change creation of CPU object from cpu_create() to object_new()
and qdev_realize_and_unref() because cpu_create() realizes the CPU and it's
not possible to set a property after the object is realized.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-8-bauerman@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of setting CPUState::halted to 1 in main_cpu_reset(), use the
start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.
Also change creation of CPU object from cpu_create() to object_new() and
qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not
possible to set a property after the object is realized.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-6-bauerman@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Instead of setting CPUState::halted to 1 in ppce500_cpu_reset_sec(), use
the start-powered-off property which makes cpu_common_reset() initialize it
to 1 in common code.
Also change creation of CPU object from cpu_create() to object_new() and
qdev_realize_and_unref() because cpu_create() realizes the CPU and it's not
possible to set a property after the object is realized.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-5-bauerman@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc/spapr: Use start-powered-off CPUState property
PowerPC sPAPR CPUs start in the halted state, and spapr_reset_vcpu()
attempts to implement this by setting CPUState::halted to 1. But that's too
late for the case of hotplugged CPUs in a machine configure with 2 or more
threads per core.
By then, other parts of QEMU have already caused the vCPU to run in an
unitialized state a couple of times. For example, ppc_cpu_reset() calls
ppc_tlb_invalidate_all(), which ends up calling async_run_on_cpu(). This
kicks the new vCPU while it has CPUState::halted = 0, causing QEMU to issue
a KVM_RUN ioctl on the new vCPU before the guest is able to make the
start-cpu RTAS call to initialize its register state.
This problem doesn't seem to cause visible issues for regular guests, but
on a secure guest running under the Ultravisor it does. The Ultravisor
relies on being able to snoop on the start-cpu RTAS call to map vCPUs to
guests, and this issue causes it to see a stray vCPU that doesn't belong to
any guest.
Fix by setting the start-powered-off CPUState property in
spapr_create_vcpu(), which makes cpu_common_reset() initialize
CPUState::halted to 1 at an earlier moment.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-4-bauerman@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
target/arm: Move start-powered-off property to generic CPUState
There are other platforms which also have CPUs that start powered off, so
generalize the start-powered-off property so that it can be used by them.
Note that ARMv7MState also has a property of the same name but this patch
doesn't change it because that class isn't a subclass of CPUState so it
wouldn't be a trivial change.
This change should not cause any change in behavior.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Message-Id: <20200826055535.951207-2-bauerman@linux.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
ppc/spapr_nvdimm: do not enable support with 'nvdimm=off'
The NVDIMM support for pSeries was introduced in 5.1, but it
didn't contemplate the 'nvdimm' machine option that other
archs uses. For every other arch, if no '-machine nvdimm(=on)'
is present, it is assumed that the NVDIMM support is disabled.
The user must explictly inform that the machine supports
NVDIMM. For pseries-5.1 the 'nvdimm' option is completely
ignored, and support is always assumed to exist. This
leads to situations where the user is able to set 'nvdimm=off'
but the guest boots up with the NVDIMMs anyway.
Fixing this now, after 5.1 launch, can put the overall NVDIMM
support for pseries in a strange place regarding this 'nvdimm'
machine option. If we force everything to be like other archs,
existing pseries-5.1 guests that didn't use 'nvdimm' to use NVDIMM
devices will break. If we attempt to make the newer pseries
machines (5.2+) behave like everyone else, but keep pseries-5.1
untouched, we'll have consistency problems on machine upgrade
(5.1 will have different default values for NVDIMM support than
5.2).
The common ground here is, if the user sets 'nvdimm=off', we
must comply regardless of being 5.1 or 5.2+. This patch
changes spapr_nvdimm_validate() to verify if the user set
NVDIMM support off in the machine options and, in that
case, error out if we have a NVDIMM device. The default
value for 5.2+ pseries machines will still be 'nvdimm=on'
when there is no 'nvdimm' option declared, just like it is today
with pseries-5.1. In the end we'll have different default
semantics from everyone else in the absence of the 'nvdimm'
machine option, but this boat has sailed.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1848887 Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200825215749.213536-4-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
spapr, spapr_nvdimm: fold NVDIMM validation in the same place
NVDIMM has different contraints and conditions than the regular
DIMM and we'll need to add at least one more.
Instead of relying on 'if (nvdimm)' conditionals in the body of
spapr_memory_pre_plug(), use the existing spapr_nvdimm_validate_opts()
and put all NVDIMM handling code there. Rename it to
spapr_nvdimm_validate() to reflect that the function is now checking
more than the nvdimm device options. This makes spapr_memory_pre_plug()
a bit easier to follow, and we can tune in NVDIMM parameters
and validation in the same place.
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200825215749.213536-3-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cédric Le Goater [Thu, 20 Aug 2020 13:45:47 +0000 (15:45 +0200)]
spapr/xive: Allocate vCPU IPIs from the vCPU contexts
When QEMU switches to the XIVE interrupt mode, it creates all the
guest interrupts at the level of the KVM device. These interrupts are
backed by real HW interrupts from the IPI interrupt pool of the XIVE
controller.
Currently, this is done from the QEMU main thread, which results in
allocating all interrupts from the chip on which QEMU is running. IPIs
are not distributed across the system and the load is not well
balanced across the interrupt controllers.
Change the vCPU IPI allocation to run from the vCPU context. The
associated XIVE IPI interrupt will be allocated on the chip on which
the vCPU is running and improve distribution of the IPIs in the system.
When the vCPUs are pinned, this will make the IPI local to the chip of
the vCPU. It will reduce rerouting between interrupt controllers and
gives better performance.
Device interrupts are still treated the same. To improve placement, we
would need some information on the chip owning the virtual source or
the HW source in case of a passthrough device but this reuires
changes in PAPR.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820134547.2355743-5-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cédric Le Goater [Thu, 20 Aug 2020 13:45:46 +0000 (15:45 +0200)]
spapr/xive: Allocate IPIs independently from the other sources
The vCPU IPIs are now allocated in kvmppc_xive_cpu_connect() when the
vCPU connects to the KVM device and not when all the sources are reset
in kvmppc_xive_source_reset()
This requires extra care for hotplug vCPUs and VM restore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820134547.2355743-4-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cédric Le Goater [Thu, 20 Aug 2020 13:45:45 +0000 (15:45 +0200)]
spapr/xive: Use kvmppc_xive_source_reset() in post_load
This is doing an extra loop but should be equivalent.
It also differentiate the reset of the sources from the restore of the
sources configuration. This will help in allocating the vCPU IPIs
independently.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820134547.2355743-3-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cédric Le Goater [Thu, 20 Aug 2020 14:01:06 +0000 (16:01 +0200)]
spapr/xive: Use the xics flag to check for XIVE-only IRQ backends
The sPAPR machine has four different IRQ backends, each implementing
the XICS or XIVE interrupt mode or both in the case of the 'dual'
backend.
If a machine is started in P8 compat mode, QEMU should necessarily
support the XICS interrupt mode and in that case, the XIVE-only IRQ
backend is invalid. Currently, spapr_irq_check() tests the pointer
value to the IRQ backend to check for this condition, instead use the
'xics' flag. It's equivalent and it will ease the introduction of new
XIVE-only IRQ backends if needed.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820140106.2357228-1-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We do not implement hotplug in the vscsi bus, but we forgot to
tell qdev about it. The result is that users are able to hotplug
devices in the vscsi bus, the devices appear in qdev, but they
aren't usable by the guest OS unless the user reboots it first.
Setting qbus hotplug_handler to NULL will tell qdev-monitor, via
qbus_is_hotpluggable(), that we do not support hotplug operations
in spapr_vscsi.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1862059 Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20200820190635.379657-1-danielhb413@gmail.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
which revealed that the IPMI HIOMAP handlers didn't support
HIOMAP_C_ERASE. Implement the sector erase command by writing 0xFF in
the PNOR memory region.
Cc: Corey Minyard <cminyard@mvista.com> Reported-by: Klaus Heinrich Kiwi <klaus@linux.vnet.ibm.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200820164638.2515681-1-clg@kaod.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Cédric Le Goater [Wed, 19 Aug 2020 13:08:36 +0000 (15:08 +0200)]
spapr/xive: Add a 'hv-prio' property to represent the KVM escalation priority
On POWER9, the KVM XIVE device uses priority 7 for the escalation
interrupts. On POWER10, the host can use a reduced set of priorities
and KVM will configure the escalation priority to a lower number. In
any case, the guest is allowed to use priorities in a single range :
[ 0 .. (maxprio - 1) ].
Introduce a 'hv-prio' property to represent the escalation priority
number and use it to compute the "ibm,plat-res-int-priorities"
property defining the priority ranges reserved by the hypervisor.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200819130843.2230799-2-clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
David Gibson [Tue, 25 Aug 2020 10:51:11 +0000 (20:51 +1000)]
spapr: Remove unnecessary DRC type-checker macros
spapr_drc.h includes typechecker macro boilerplate for the many different
DRC subclasses. However, most of these types don't actually have different
data in their class and/or instance, making these unneeded, unused, and in
fact a bad idea. Remove them.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Greg Kurz <groug@kaod.org>
David Gibson [Tue, 25 Aug 2020 10:28:51 +0000 (20:28 +1000)]
adb: Correct class size on TYPE_ADB_DEVICE
The TypeInfo incorrectly just lets the class size be inherited. It won't
actually break things, since the class is abstract, but we should get it
right.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Peter Maydell [Mon, 7 Sep 2020 20:50:29 +0000 (21:50 +0100)]
Merge remote-tracking branch 'remotes/hdeller/tags/target-hppa-pull-request' into staging
hppa power button support, graphics updates and firmware fixes
# gpg: Signature made Mon 07 Sep 2020 20:09:49 BST
# gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg: aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603
# Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F
* remotes/hdeller/tags/target-hppa-pull-request:
hw/display/artist: Allow screen size up to 2048 lines
hw/display/artist: Refactor x/y coordination extraction
hw/display/artist: Verify artist screen resolution
target/hppa: Fix boot with old Linux installation CDs
hw/hppa: Add power button emulation
hw/hppa: Tell SeaBIOS port address of fw_cfg
hw/hppa: Change fw_cfg port address
hw/hppa: Store boot device in fw_cfg section
hw/hppa: Make number of TLB and BTLB entries configurable
seabios-hppa: Update SeaBIOS to hppa-qemu-5.2-2 tag
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In 19f27b6c2493 TARGET_ABI_LONG was reduced to 32 bits for
CONFIG_USER_ONLY. There is no need to set this by hand; it will
now be set automatically by include/exec/user/abitypes.h.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Put MicroBlazeCPUConfig into DisasContext
The bulk of the translator should not have access to the
complete cpu state, to avoid the temptation to examine bits
that are in run time, but not translation time context.
We do need access to the constant cpu configuration, and
that is sufficient, so put that into DisasContext.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Fill in VMStateDescription for cpu
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Move mmu parameters to MicroBlazeCPUConfig
The final 4 fields in MicroBlazeMMU are configuration constants.
Move them into MicroBlazeCPUConfig where they belong.
Remove the leading "c_" from the member names, as that presumably
implied "config", and that should not be explicit in the location.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allow gdb to set the values, and don't bother dumping
unchanging values with -d cpu.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Move pvr regs to MicroBlazeCPUConfig
These values are constant, and are derived from the other
configuration knobs. Move them into MicroBlazeCPUConfig
to emphasize that they are not variable.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
projects / qemu-xen.git / log