Scripts from the following list were installed with group write
bit set: virt-xml-validate, virt-pki-validate,
virt-sanlock-cleanup, libvirt-guests.sh. This is very unusual and
in contrast with the way other scripts/binaries are installed.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2151202 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Haruka Ohata [Wed, 30 Nov 2022 08:04:07 +0000 (17:04 +0900)]
virsh: Add message to terminal when running snapshot-revert
When running virsh snapshot-* command, such as snapshot-create-as /
snapshot-delete, it prints a result message.
On the other hand virsh snapshot-revert command doesn't print a result
message.
So, This patch fixes to add message when running virsh snapshot-revert
command.
Historically, QEMU took screenshots in PPM. While this might use
to be popular format, as of v7.1.0-rc0~125^2~6 it is possible to
take screenshots in PNG. This is more popular and renders almost
everywhere, which is not the case for PPM (for instance, modern
browsers do not render it).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jim Fehlig [Fri, 2 Dec 2022 22:50:05 +0000 (15:50 -0700)]
spec: Remove extra blank lines
The spec file contains inconsistent use of blank lines. While trying to
make significant changes to the file, I found it hurts both readability
and maintainability. Remove blank lines that interrupt the overall flow
and consistency.
Signed-off-by: Jim Fehlig <jfehlig@suse.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Internal domain state may change during the reset and qemu does
not always send events about it. In case it happens, internal
state of the domain in libvirt would be inconsistent with the
internal state in qemu which could cause additional problems
(e.g. cdrom tray state can change from open to closed). The
solution is to refresh state after a successful reset to query
qemu about the current internal domain state.
Paths for external devices (well, so far only vTPM) are not
stored in the status XML. Therefore, we need to regenerate them
after we've been restarted and reconnecting to a running domain.
Otherwise these will remain NULL which may later lead to a NULL
dereference.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2150760 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu_extdevice: Init paths in qemuExtDevicesPrepareDomain()
The path generation phase belongs conceptually into domain
preparation phase and not host preparation. Move
qemuExtDevicesInitPaths() call from qemuExtDevicesPrepareHost()
into qemuExtDevicesPrepareDomain().
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
qemu_process: Document qemuProcessPrepare{Domain,Host}() order
The domain startup process is split into multiple phases. One of
them is preparing the domain (at that point live) XML, private
data, various paths, etc - see qemuProcessPrepareDomain(); the
other prepares the host - see qemuProcessPrepareHost(). It's
obvious that the domain XML preparation function must be called
before the host preparation function (e.g. the host preparation
might try to create a file which path is generated in the domain
preparation phase). Nevertheless, let's document this
expectation.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 22 Nov 2022 16:01:31 +0000 (17:01 +0100)]
lxcDomainDetachDeviceFlags: Parse XML twice rather than use virDomainDeviceDefCopy
'virDomainDeviceDefCopy' formats the definition and parses it back.
Since we already are parsing the XML here, we're better off parsing it
twice and save the formatting step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 22 Nov 2022 16:01:31 +0000 (17:01 +0100)]
lxcDomainAttachDeviceFlags: Parse XML twice rather than use virDomainDeviceDefCopy
'virDomainDeviceDefCopy' formats the definition and parses it back.
Since we already are parsing the XML here, we're better off parsing it
twice and save the formatting step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 22 Nov 2022 16:01:31 +0000 (17:01 +0100)]
qemuDomainDetachDeviceLiveAndConfig: Parse XML twice rather than use virDomainDeviceDefCopy
'virDomainDeviceDefCopy' formats the definition and parses it back.
Since we already are parsing the XML here, we're better off parsing it
twice and save the formatting step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 22 Nov 2022 16:01:31 +0000 (17:01 +0100)]
qemuDomainUpdateDeviceFlags: Parse XML twice rather than use virDomainDeviceDefCopy
'virDomainDeviceDefCopy' formats the definition and parses it back.
Since we already are parsing the XML here, we're better off parsing it
twice and save the formatting step.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
We don't refuse override definitions for device which doesn't exist and
the same way don't care about 'remove' being used on a property which is
not actually formatted by libvirt. Drop the paragraph claiming the
contrary.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 21 Nov 2022 12:44:54 +0000 (13:44 +0100)]
docs: drvqemu: Fix and improve docs about device override types
The 'number' override type didn't exist in the final version so change
it to the corresponding 'signed' and 'unsigned'.
Additionally clarify which override type is used for a corresponding
qemu type and also that we use base 10 numbers so users will need to
convert the numbers if needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Shaleen Bathla [Fri, 11 Nov 2022 09:24:38 +0000 (14:54 +0530)]
qemu: Don't report spurious errors from vCPU tid validation on hotunplug timeout
Use of qemuDomainValidateVcpuInfo in the helpers for hotplug and unplug
of vCPUs can lead to spurious errors reported such as:
internal error: qemu didn't report thread id for vcpu 'XX'"
The reason for this is that qemuDomainValidateVcpuInfo validates the
state of all vCPUs against the expected state of vCPUs. If an unplug
operation completed before libvirt was unable to process it yet the
expected state could not reflect the current state.
To avoid spurious errors the qemuDomainHotplugAddVcpu and
qemuDomainRemoveVcpu functions are modified to do localized validation
only for the vCPUs they actually modify.
We also now ensure that the cgroups are modified before bailing out on
error for any vCPUs which passed validation.
Additionally in order for qemuDomainRemoveVcpuAlias to be able to find
the unplugged vCPU we must ensure that qemuDomainRefreshVcpuInfo does
not clear out the alias in case when the vCPU is no longer reported by
qemu.
Co-authored-by: Partha Satapathy <partha.satapathy@oracle.com> Signed-off-by: Shaleen Bathla <shaleen.bathla@oracle.com> Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Recently, the QEMU driver gained support for migration with TPM
state on a shared volume (e.g. NFS). As a part of that, the
destination side avoids setting seclabels on it to avoid cutting
off the source while it is still using it. Makes sense, except
for a wee bit: the secdriver API does a bit more - it also sets
label on the swtpm log file. And this one definitely needs to be
labeled (it lives under /var/log/swtpm/libvirt/qemu/..., i.e. not
on a shared volume).
Previously, qemuSecurityStartTPMEmulator() took care of that. But
during rework to shared volume migration, the code was changed so
now plain qemuSecurityCommandRun() would be run (i.e. no
relabelling).
But after previous commits, we can now chose whether the TPM
state should be relabelled or just the log file.
Fixes: 2e669ec789231d39e0d5f5f6a201d2a661b8070c
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2130192#c7 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
This is basically just a continuation of the previous commit.
Now that the security driver APIs have a boolean flag that
controls setting/restoring seclabel of either both TPM state and
log files, or just the log file, propagate this boolean into
those APIs that start/stop swtpm emulator. For now, just pass
true. The juicy bits are soon to come.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
The virSecurityDomainSetTPMLabels() and
virSecurityDomainRestoreTPMLabels() APIs set/restore label on two
files/directories:
1) the TPM state (tpm->data.emulator.storagepath), and
2) the TPM log file (tpm->data.emulator.logfile).
Soon there will be a need to set the label on the log file but
not on the state. Therefore, extend these APIs for a boolean flag
that when set does both, but when unset does only 2).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 19 Oct 2022 11:59:17 +0000 (13:59 +0200)]
virshFindDisk: Sanitize use of 'tmp' variable
The return value of virXMLPropString was assigned into 'tmp' multiple
times and to prevent static analyzers moaning about a potential leak a
short-circuited if logic or was used.
Replace the code by having a helper variable for each possibility and
also replace the for-loop to iterate elements.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Fri, 2 Dec 2022 09:35:13 +0000 (10:35 +0100)]
util: xml: Introduce virXMLNodeGetSubelement
Introduce a simple helper fetching a sub-element node by name. This is
meant as a simple replacement for either open-coded versions of this or
use of XPath for this trivial lookup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 19 Oct 2022 11:31:00 +0000 (13:31 +0200)]
virshFindDisk: Sanitize removable media check
The XPath lookup guarantees that the top level element is always 'disk'
so there's no need to check that it actually is. We can also remove the
two unnecessary temporary variables.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Thu, 1 Dec 2022 16:19:50 +0000 (17:19 +0100)]
qemu: monitor: Use qemuMonitorJSONGetReply in conjunction with virJSONValueArrayToStringList
In two instances (qemuMonitorJSONGetStringListProperty,
qemuMonitorJSONGetStringArray) the return value is checked by
qemuMonitorJSONCheckReply and extracted by
virJSONValueObjectGetStringArray.
We can use qemuMonitorJSONGetReply which returns it directly and then
virJSONValueArrayToStringList to convert it without the additional
lookup.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 1 Dec 2022 15:13:05 +0000 (16:13 +0100)]
qemuMonitorJSONGetCPUDefinitions: Rework lookup of 'unavailable-features'
Rather than checking that the object has the correct key and then
fetching it again use fetch the array first and then use
virJSONValueArrayToStringList to directly convert it.
Additionally we can avoid the conversion if there are no members
simplifying the surrounding logic.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 1 Dec 2022 16:02:42 +0000 (17:02 +0100)]
qemuAgentGetDisks: Don't use virJSONValueObjectGetStringArray for optional data
The 'dependencies' field in the return data may be missing in some
cases. Historically 'virJSONValueObjectGetStringArray' didn't report
error in such case, but later refactor (commit 043b50b948ef3c2 ) added
an error in order to use it in other places too.
Unfortunately this results in the error log being spammed with an
irrelevant error in case when qemuAgentGetDisks is invoked on a VM
running windows.
Replace the use of virJSONValueObjectGetStringArray by fetching the
array first and calling virJSONValueArrayToStringList only when we have
an array.
Fixes: 043b50b948ef3c2a4adf5fa32a93ec2589851ac6
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2149752 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 1 Dec 2022 12:32:07 +0000 (13:32 +0100)]
util: json: Split out array->strinlist conversion from virJSONValueObjectGetStringArray
Introduce virJSONValueArrayToStringList which does only the conversion
from an array to a stringlist.
This will allow refactoring the callers to be more careful in case when
they want to handle the existance of the member in the parent object
differently.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 1 Dec 2022 15:18:52 +0000 (16:18 +0100)]
qemu: monitor: Introduce qemuMonitorJSONGetReply, a better qemuMonitorJSONCheckReply
Rather than simply checking that the 'return' field is of the expected
type we can directly return it as the caller is very likely going to use
it. Extract the code into the new function and add a wrapper to preserve
old functionality.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Tue, 22 Nov 2022 10:44:50 +0000 (11:44 +0100)]
internal: Refuse values exceeding range of 'unsigned int' in virCheckFlags
Historically our migration APIs declare 'unsigned long flags'. Since
it's baked into our API we can't change that but we can avoid
compatibility problems by preemptively refusing the extra range on
certain arches to prevent future surprise.
Modify the macro to verify that value passed inside 'flags' doesn't
exceed the range of 'unsigned int'.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jim Fehlig [Fri, 2 Dec 2022 00:08:38 +0000 (17:08 -0700)]
spec: Remove use of %{name} macro
The spec file uses both "libvirt" and "%{name}", but in reality the
expanded value of %{name} will never change. Drop the macro in favor
of the explicit and more readable "libvirt".
Signed-off-by: Jim Fehlig <jfehlig@suse.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
In one of recent commits I've introduced a new test case to
commandtest. In the test case I'm using poll() to wait for data
on a pipe (the write end is passed to commandhelper). However, on
FreeBSD the POLLIN semantic is a bit different:
POLLIN Data other than high priority data may be read
without blocking.
Well, the pipe is non-blocking, so even if there's no data to be
read the flag is set (and subsequent read() returns 0). On the
other hand, POLLHUP is set too, BUT, if the commandhelper manages
to write everything into the pipe and die right after we'd get
both POLLIN and POLLHUP after the very first time poll() returns.
That's very unfortunate, but okay - we can just check whether
read() returned zero and break from the reading loop.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Michal Privoznik [Wed, 30 Nov 2022 08:57:49 +0000 (09:57 +0100)]
tests: Use virTestCompareToString() more
Instead of using:
if (STRNEQ(a, b)) {
virTestDifference(stderr, a, b);
...
}
we can use:
if (virTestCompareToString(a, b) < ) {
...
}
Generated by the following spatch:
@@
expression a, b;
@@
- if (STRNEQ(a, b)) {
+ if (virTestCompareToString(a, b) < 0) {
...
- virTestDifference(stderr, a, b);
...
}
and its variations (STRNEQ_NULLABLE() instead of STRNEQ(), then
in some cases variables passed to STRNEQ() are in reversed order
when compared to virTestCompareToString()).
However, coccinelle failed to recognize the pattern in
testNWFilterEBIPTablesAllTeardown() so I had to fix it manually.
Also, I manually fixed testFormat() in tests/sockettest.c as I
didn't bother writing another spatch rule just for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Michal Privoznik [Wed, 30 Nov 2022 08:39:46 +0000 (09:39 +0100)]
virbuftest: Cleanup code around virTestDifference()
Two things are happening here:
1) Call to virTestDifference() is guarded by '!result ||
STRNEQ(result, _)' check. This is suboptimal since we have
STRNEQ_NULLABLE().
2) There are couple of VIR_TEST_DEBUG() printings, which are
useless. If debug is off they don't print anything, and if it
is on, then much more information is printed by subsequent
virTestDifference().
This makes the STRNEQ() + virTestDifference() combo look similar
to the rest of tests and thus can be picked up by spatch later.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Michal Privoznik [Tue, 22 Mar 2022 12:36:38 +0000 (13:36 +0100)]
commandtest: Use virTestCompareToFile() in checkoutput()
In the commandtest there is checkoutput() function which checks
the latest log of commandhelper (containing things like cmd line
arguments, env vars, FDs, CWD, etc.) and compares that against
expected output. Well, the way this function implements that is
effectively by open coding virTestCompareToFile() except for the
nice feature that the virTestCompareToFile() has:
VIR_TEST_OUTPUT_REGENERATE.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Michal Privoznik [Tue, 22 Mar 2022 11:12:02 +0000 (12:12 +0100)]
virCommandSetSendBuffer: Take double pointer of @buffer
The virCommandSetSendBuffer() function consumes passed @buffer,
but takes it only as plain pointer. Switch to a double pointer to
make this obvious. This allows us then to drop all
g_steal_pointer() in callers.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
Michal Privoznik [Tue, 29 Nov 2022 15:55:16 +0000 (16:55 +0100)]
virCommandDoAsyncIO: Drop misleading statement about main event loop
Back in v1.0.3-rc1~235 when I was adding virCommandDoAsyncIO(),
the main event loop was used to poll() on the pipe to the child
process. But this was promptly changed to a separate thread
handling I/O in v1.0.3-rc1~127. However, the corresponding
comment to virCommandDoAsyncIO() still documents the original
state.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
When virCommandSetSendBuffer() is used over a virCommand that is
(or will be) daemonized, then the command must have
VIR_EXEC_ASYNC_IO flag set no later than at virCommandRunAsync()
phase so that the thread that's doing IO is spawned and thus
buffers can be sent to the process.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com>
conf: report no NUMA nodes when attaching memory device
Error message reports that the guest has '0' NUMA nodes
configured when trying to attach a memory device to a guest with
no NUMA nodes. This may be a little misleading because '0' can
also be node's id. A more friendly way is to directly report
that the guest has no NUMA nodes.
Jiri Denemark [Wed, 30 Nov 2022 13:29:55 +0000 (14:29 +0100)]
qemu: Pass vm to qemuMigrationCookieParse if it exists
The vm object is used inside qemuMigrationCookieParse based on the flags
passed to qemuMigrationCookieParse and the content of the cookie. The
callers should not just blindly guess and pass NULL if they
(incorrectly) think the vm object is not needed. We should always pass
the vm object unless it does not exist yet.
This fixes a bug when statistics of a completed migration reported
"Unknown" operation instead of "Incoming migration" on the destination
host.
Michal Privoznik [Wed, 30 Nov 2022 13:53:21 +0000 (14:53 +0100)]
node_device_conf: Avoid memleak in virNodeDeviceGetPCIVPDDynamicCap()
The virNodeDeviceGetPCIVPDDynamicCap() function is called from
virNodeDeviceGetPCIDynamicCaps() and therefore has to be a wee
bit more clever about adding VPD capability. Namely, it has to
remove the old one before adding a new one. This is how other
functions called from virNodeDeviceGetPCIDynamicCaps() behave
as well.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2143235 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Michal Privoznik [Tue, 22 Nov 2022 11:18:35 +0000 (12:18 +0100)]
qemu_tpm: Check for qemuTPMSetupEncryption() errors
Inside of qemuTPMEmulatorBuildCommand() there are two calls to
qemuTPMSetupEncryption() which simply ignore returned error. This
is suboptimal because then we rely on swtpm binary reporting a
generic error (something among invalid command line arguments)
while an error reported by qemuTPMSetupEncryption() is more
specific.
However, since virCommandSetSendBuffer() only sets an error
inside of virCommand structure (the error is then reported in
virCommandRun()), we need to exempt its retval from error
checking. Thus, the signature of qemuTPMSetupEncryption() is
changed a bit so that -1/0 can be returned to indicate error.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Peter Krempa [Mon, 28 Nov 2022 16:09:23 +0000 (17:09 +0100)]
Document caveats of hypervisor-specific stats in 'VIR_DOMAIN_STATS_VCPU' group
In commit c43718ef67944 I've added a disclaimer that the new stats which
are fetched from qemu and passed directly to the user are not guaranteed
by libvirt. I didn't notice that per-vcpu hypervisor specific stats are
also snuck into the VIR_DOMAIN_STATS_VCPU group along with other
pre-existing stats we do guarantee.
Extend the disclaimer for VIR_DOMAIN_STATS_VCPU too.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Michal Privoznik [Thu, 24 Nov 2022 11:34:56 +0000 (12:34 +0100)]
virnetdevbandwidth: Unbreak tc filter update on Linux-4.20+
Guests are allowed to change their MAC addresses. Subsequently,
we may respond to that with tweaking that part of host side
configuration that depends on it. In this particular case: QoS.
Some parts of QoS are in fact set on corresponding bridge, where
overall view on traffic can be seen. Here, TC filters are used to
place incoming packets into qdiscs. These filters match source
MAC address. Therefore, upon guest changing its MAC address, the
corresponding TC filter needs to be updated too. This is done by
simply removing the old one and instantiating a new one, with new
MAC address.
Now, u32 filters (which we use) use a hash table for matching,
internally. And when deleting the old filter, we used to remove
the hash table (ID = 800::) and let the new filter instantiate
new hash table. This used to work, until kernel release 4.20
(specifically commit v4.20-rc1~27^2~131^2~11 and its friends)
where this practice was turned into error.
But that's okay - we can delete the specific filter we are after
and not touch the hash table at all.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Michal Privoznik [Thu, 24 Nov 2022 09:28:59 +0000 (10:28 +0100)]
conf: Make VIR_DOMAIN_NET_TYPE_ETHERNET not share 'host view'
When setting up QoS for a domain <interface/>, or when reporting
its statistics we may need to swap TX/RX values. This is all
explained in comment to virDomainNetTypeSharesHostView().
However, this function claims that VIR_DOMAIN_NET_TYPE_ETHERNET
also shares the 'host view', meaning the TX/RX values must be
swapped. But that's not true.
An easy reproducer is to start a domain with two <interface/>-s:
one type of network, the other of type ethernet and configure the
same <bandwidth/> for both. Reversed setting can then be observed
(e.g. via tc).
projects / libvirt.git / log