Fix calling order wherein iommu_detected would be set after software IO TLB was initialized causing double IO TLB allocation.
The iommu_detected flag was set _after_ the Software IO TLB was initialized.
This caused the Xen software IO TLB to be init and right after that the software IO TLB.
Merging xen_swiotlb_init and xen_swiotlb_init_alloc in one function that sets
this argument fixes the issue.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
xen/swiotlb: make sure dma address is really local before testing for swiotlb
When doing DMA on behalf of another domain, we operate on granted pages.
These pages are temporarily mapped into dom0, and don't have a proper
machine-to-phys mapping. If we blindly perform a m2p mapping then
check the resulting address against the swiotlb range, we may end up
misidentifying the address as needing bouncing, which at best will result
in data corruption for the guest, and could end up corrupting dom0 memory.
To determine whether a page is local, we need to see if the mfn<->pfn
mappings work both ways.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Provide two functions:xen_swiotlb_[init|init_alloc] and remove dupliate __setup function.
The two functions are correspondingly used to detect whether
to utilize the Xen-SWIOTLB and if so allocate a 64MB SWIOTLB
(similar to what swiotlb_init does).
The __setup function is used to parse the 'swiotlb' arguments.
This is already done in lib/swiotlb.c.
Lastly, we setup a dma_map_ops struct with xen_swiotlb_* functions.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
xen/swiotlb: define xen_wants_swiotlb when PCI_XEN is not enabled
If CONFIG_PCI is disabled, CONFIG_SWIOTLB can still be enabled on x86-64,
which calls xen_wants_swiotlb(). Define a stub version when CONFIG_PCI
(and, implicitly, CONFIG_PCI_XEN) is not enabled.
[ Impact: compile fix with !CONFIG_PCI ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Ian Campbell [Mon, 9 Feb 2009 20:05:47 +0000 (12:05 -0800)]
xen swiotlb: allocate swiotlb in chunks smaller than MAX_CONTIG_ORDER
Don't attempt to make larger memory ranges than Xen can cope with
contiguous, by allocating them in IO_TLB_SEGSIZE-sized chunks rather
than in one large piece.
[ Impact: ask Xen for contigious memory in IO_TLB_SEGSIZE chunks ]
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
When running in Xen domain with device access, we need to make sure
the block subsystem doesn't merge requests across pages which aren't
machine physically contiguous. To do this, we define our own
BIOVEC_PHYS_MERGEABLE. When CONFIG_XEN isn't enabled, or we're not
running in a Xen domain, this has identical behaviour to the normal
implementation. When running under Xen, we also make sure the
underlying machine pages are the same or adjacent.
[ Impact: allow Xen control of bio merging ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
x86/pci: make sure _PAGE_IOMAP it set on pci mappings
When mapping pci space via /sys or /proc, make sure we're really
doing a hardware mapping by setting _PAGE_IOMAP.
[ Impact: bugfix; make PCI mappings map the right pages ]
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Reviewed-by: "H. Peter Anvin" <hpa@zytor.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Alex Nixon [Mon, 9 Feb 2009 20:05:47 +0000 (12:05 -0800)]
Xen/x86/PCI: Add support for the Xen PCI subsystem
On boot, the system will search to see if a Xen iommu/pci subsystem is
available. If the kernel detects it's running in a domain rather than
on bare hardware, this subsystem will be used. Otherwise, it falls
back to using hardware as usual.
The frontend stub lives in arch/x86/pci-xen.c, alongside other
sub-arch PCI init code (e.g. olpc.c)
(All subsequent fixes, API changes and swiotlb operations folded in.)
[ Impact: add core of Xen PCI support ]
Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: "H. Peter Anvin" <hpa@zytor.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Alex Nixon [Mon, 9 Feb 2009 20:05:46 +0000 (12:05 -0800)]
x86/PCI: Enable scanning of all pci functions
Xen may want to enable scanning of all pci functions - if for example
the device at function 0 is not passed through to the guest, but the
device at function 1 is.
Jesse objected to the "#undef pcibios_scan_all_fns"'s ugliness,
so replace it with the more common HAVE_ARCH_ idiom.
[ Impact: allow passthrough of just some PCI functions. ]
Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Reviewed-by: "H. Peter Anvin" <hpa@zytor.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Alex Nixon [Mon, 9 Feb 2009 20:05:46 +0000 (12:05 -0800)]
xen: Add xen_create_contiguous_region
A memory region must be physically contiguous in order to be accessed
through DMA. This patch adds xen_create_contiguous_region, which
ensures a region of contiguous virtual memory is also physically
contiguous.
Based on Stephen Tweedie's port of the 2.6.18-xen version.
Remove contiguous_bitmap[] as it's no longer needed.
[ Impact: add Xen-internal API to make pages phys-contig ]
Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Alex Nixon [Mon, 9 Feb 2009 20:05:46 +0000 (12:05 -0800)]
Xen: Rename the balloon lock
* xen_create_contiguous_region needs access to the balloon lock to
ensure memory doesn't change under its feet, so expose the balloon
lock
* Change the name of the lock to xen_reservation_lock, to imply it's
now less-specific usage.
[ Impact: cleanup ]
Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Linus Torvalds [Wed, 17 Jun 2009 17:42:21 +0000 (10:42 -0700)]
Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6
* 'kmemleak' of git://linux-arm.org/linux-2.6:
kmemleak: Fix some typos in comments
kmemleak: Rename kmemleak_panic to kmemleak_stop
kmemleak: Only use GFP_KERNEL|GFP_ATOMIC for the internal allocations
Catalin Marinas [Wed, 17 Jun 2009 17:29:02 +0000 (18:29 +0100)]
kmemleak: Only use GFP_KERNEL|GFP_ATOMIC for the internal allocations
Kmemleak allocates memory for pointer tracking and it tries to avoid
using GFP_ATOMIC if the caller doesn't require it. However other gfp
flags may be passed by the caller which aren't required by kmemleak.
This patch filters the gfp flags so that only GFP_KERNEL | GFP_ATOMIC
are used.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Linus Torvalds [Wed, 17 Jun 2009 16:51:50 +0000 (09:51 -0700)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] cpumask: new cpumask operators for arch/x86/kernel/cpu/cpufreq/powernow-k8.c
[CPUFREQ] cpumask: avoid playing with cpus_allowed in powernow-k8.c
[CPUFREQ] cpumask: avoid cpumask games in arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
[CPUFREQ] cpumask: avoid playing with cpus_allowed in speedstep-ich.c
[CPUFREQ] powernow-k8: get drv data for correct CPU
[CPUFREQ] powernow-k8: read P-state from HW
[CPUFREQ] reduce scope of ACPI_PSS_BIOS_BUG_MSG[]
[CPUFREQ] Clean up convoluted code in arch/x86/kernel/tsc.c:time_cpufreq_notifier()
[CPUFREQ] minor correction to cpu-freq documentation
[CPUFREQ] powernow-k8.c: mess cleanup
[CPUFREQ] Only set sampling_rate_max deprecated, sampling_rate_min is useful
[CPUFREQ] powernow-k8: Set transition latency to 1 if ACPI tables export 0
[CPUFREQ] ondemand: Uncouple minimal sampling rate from HZ in NO_HZ case
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6:
[SCSI] aic79xx: make driver respect nvram for IU and QAS settings
[SCSI] don't attach ULD to Dell Universal Xport
[SCSI] lpfc 8.3.3 : Update driver version to 8.3.3
[SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint
[SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crash
[SCSI] lpfc 8.3.3 : FC/FCOE discovery fixes
[SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences
[SCSI] qla2xxx: Resolve a performance issue in interrupt
[SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set.
[SCSI] nsp_cs: time_out reaches -1
[SCSI] qla2xxx: fix printk format warnings
[SCSI] ncr53c8xx: div reaches -1
[SCSI] compat: don't perform unneeded copy in sg_io code
[SCSI] zfcp: Update FC pass-through support
[SCSI] zfcp: Add FC pass-through support
[SCSI] FC Pass Thru support
Linus Torvalds [Wed, 17 Jun 2009 16:48:30 +0000 (09:48 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6
* 'linux-next' of git://git.infradead.org/ubi-2.6: (21 commits)
UBI: add reboot notifier
UBI: handle more error codes
UBI: fix multiple spelling typos
UBI: fix kmem_cache_free on error patch
UBI: print amount of reserved PEBs
UBI: improve messages in the WL worker
UBI: make gluebi a separate module
UBI: remove built-in gluebi
UBI: add notification API
UBI: do not switch to R/O mode on read errors
UBI: fix and clean-up error paths in WL worker
UBI: introduce new constants
UBI: fix race condition
UBI: minor serialization fix
UBI: do not panic if volume check fails
UBI: add dump_stack in checking code
UBI: fix races in I/O debugging checks
UBI: small debugging code optimization
UBI: improve debugging messages
UBI: re-name volumes_mutex to device_mutex
...
Linus Torvalds [Wed, 17 Jun 2009 16:46:33 +0000 (09:46 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
* 'linux-next' of git://git.infradead.org/ubifs-2.6:
UBIFS: start using hrtimers
hrtimer: export ktime_add_safe
UBIFS: do not forget to register BDI device
UBIFS: allow sync option in rootflags
UBIFS: remove dead code
UBIFS: use anonymous device
UBIFS: return proper error code if the compr is not present
UBIFS: return error if link and unlink race
UBIFS: reset no_space flag after inode deletion
Linus Torvalds [Wed, 17 Jun 2009 16:13:52 +0000 (09:13 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (47 commits)
MIPS: Add hibernation support
MIPS: Move Cavium CP0 hwrena impl bits to cpu-feature-overrides.h
MIPS: Allow CPU specific overriding of CP0 hwrena impl bits.
MIPS: Kconfig Add SYS_SUPPORTS_HUGETLBFS and enable it for some systems.
Hugetlbfs: Enable hugetlbfs for more systems in Kconfig.
MIPS: TLB support for hugetlbfs.
MIPS: Add hugetlbfs page defines.
MIPS: Add support files for hugetlbfs.
MIPS: Remove unused parameters from iPTE_LW.
Staging: Add octeon-ethernet driver files.
MIPS: Export erratum function needed by octeon-ethernet driver.
MIPS: Cavium-Octeon: Add more chip specific feature tests.
MIPS: Cavium-Octeon: Add more board type constants.
MIPS: Export cvmx_sysinfo_get needed by octeon-ethernet driver.
MIPS: Add named alloc functions to OCTEON boot monitor memory allocator.
MIPS: Alchemy: devboards: Convert to gpio calls.
MIPS: Alchemy: xxs1500: use linux gpio api.
MIPS: Alchemy: MTX-1: Use linux gpio api.
MIPS: Alchemy: Rewrite GPIO support.
MIPS: Alchemy: Remove unused au1000_gpio.h header
...
Linus Torvalds [Wed, 17 Jun 2009 15:46:57 +0000 (08:46 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
get rid of BKL in fs/sysv
get rid of BKL in fs/minix
get rid of BKL in fs/efs
befs ->pust_super() doesn't need BKL
Cleanup of adfs headers
9P doesn't need BKL in ->umount_begin()
fuse doesn't need BKL in ->umount_begin()
No instance of ->bmap() needs BKL
remove unlock_kernel() left accidentally
ext4: avoid unnecessary spinlock in critical POSIX ACL path
ext3: avoid unnecessary spinlock in critical POSIX ACL path
Wu Zhangjin [Thu, 4 Jun 2009 12:27:10 +0000 (20:27 +0800)]
MIPS: Add hibernation support
[Ralf: SMP support requires CPU hotplugging which MIPS currently doesn't
support. As implemented in this patch cache and tlb flushing will also be
invoked with interrupts disabled so smp_call_function() will blow up in
charming ways. So limit to !SMP.]
Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Yan Hua <yanh@lemote.com> Reviewed-by: Arnaud Patard <apatard@mandriva.com> Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Wu Zhangjin <wuzj@lemote.com> Signed-off-by: Hu Hongbing <huhb@lemote.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 28 May 2009 00:47:45 +0000 (17:47 -0700)]
Hugetlbfs: Enable hugetlbfs for more systems in Kconfig.
As part of adding hugetlbfs support for MIPS, I am adding a new
kconfig variable 'SYS_SUPPORTS_HUGETLBFS'. Since some mips cpu
varients don't yet support it, we can enable selection of HUGETLBFS on
a system by system basis from the arch/mips/Kconfig.
Signed-off-by: David Daney <ddaney@caviumnetworks.com> CC: William Irwin <wli@holomorphy.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Wed, 6 May 2009 00:35:21 +0000 (17:35 -0700)]
Staging: Add octeon-ethernet driver files.
The octeon-ethernet driver supports the sgmii, rgmii, spi, and xaui
ports present on the Cavium OCTEON family of SOCs. These SOCs are
multi-core mips64 processors with existing support over in arch/mips.
The driver files can be categorized into three basic groups:
1) Register definitions, these are named cvmx-*-defs.h
2) Main driver code, these have names that don't start cvmx-.
3) Interface specific functions and other utility code, names starting
with cvmx-
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Manuel Lauss [Sat, 6 Jun 2009 12:09:55 +0000 (14:09 +0200)]
MIPS: Alchemy: Rewrite GPIO support.
The current in-kernel Alchemy GPIO support is far too inflexible for
all my use cases. To address this, the following changes are made:
* create generic functions which deal with manipulating the on-chip
GPIO1/2 blocks. Such functions are universally useful.
* Macros for GPIO2 shared interrupt management and block control.
* support for both built-in CONFIG_GPIOLIB and fast, inlined GPIO macros.
If CONFIG_GPIOLIB is not enabled, provide linux gpio framework
compatibility by directly inlining the GPIO1/2 functions. GPIO access
is limited to on-chip ones and they can be accessed as documented in
the datasheets (GPIO0-31 and 200-215).
If CONFIG_GPIOLIB is selected, two (2) gpio_chip-s, one for GPIO1 and
one for GPIO2, are registered. GPIOs can still be accessed by using
the numberspace established in the databooks.
However this is not yet flexible enough for my uses: My Alchemy
systems have a documented "external" gpio interface (fixed, different
numberspace) and can support a variety of baseboards, some of which
are equipped with I2C gpio expanders. I want to be able to provide
the default 16 GPIOs of the CPU board numbered as 0..15 and also
support gpio expanders, if present, starting as gpio16.
To achieve this, a new Kconfig symbol for Alchemy is introduced,
CONFIG_ALCHEMY_GPIO_INDIRECT, which boards can enable to signal
that they don't want the Alchemy numberspace exposed to the outside
world, but instead want to provide their own. Boards are now respon-
sible for providing the linux gpio interface glue code (either in a
custom gpio.h header (in board include directory) or with gpio_chips).
To make the board-specific inlined gpio functions work, the MIPS
Makefile must be changed so that the mach-au1x00/gpio.h header is
included _after_ the board headers, by moving the inclusion of
the mach-au1x00/ to the end of the header list.
See arch/mips/include/asm/mach-au1x00/gpio.h for more info.
Ralf Baechle [Wed, 17 Jun 2009 10:06:28 +0000 (11:06 +0100)]
MIPS: ioctl.h: Cleanup.
o Rewrite to use <asm-generic/ioctl.h>. Cuts down the file from 40 to
16 lines.
o Delete _IOC_VOID, _IOC_OUT, _IOC_IN and _IOC_INOUT. They were added
for 2.1.14 but I was not able to find any user - not even historical
ones.
Imre Kaloz [Tue, 2 Jun 2009 12:22:06 +0000 (14:22 +0200)]
MIPS: Sibyte: Remove standalone kernel support
CFE is the only supported and used bootloader on the SiByte boards,
the standalone kernel support has been never used outside Broadcom.
Remove it and make the kernel use CFE by default.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Florian Fainelli [Thu, 21 May 2009 17:49:47 +0000 (19:49 +0200)]
MIPS: RB532: Check irq number when handling GPIO interrupts
This patch makes sure that we are not going to clear
or change the interrupt status of a GPIO interrupt
superior to 13 as this is the maximum number of GPIO
interrupt source (p.232 of the RC32434 reference manual).
David Daney [Tue, 12 May 2009 19:41:53 +0000 (12:41 -0700)]
MIPS: Allow R2 CPUs to turn off generation of 'ehb' instructions.
Some CPUs do not need ehb instructions after writing CP0 registers.
By allowing ehb generation to be overridden in
cpu-feature-overrides.h, we can save a few instructions in the TLB
handler hot paths.
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Wed, 20 May 2009 18:40:59 +0000 (11:40 -0700)]
MIPS: Fold the TLB refill at the vmalloc path if possible.
Try to fold the 64-bit TLB refill handler opportunistically at the
beginning of the vmalloc path so as to avoid splitting execution flow in
half and wasting cycles for a branch required at that point then. Resort
to doing the split if either of the newly created parts would not fit into
its designated slot.
Original-patch-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Wed, 20 May 2009 18:40:58 +0000 (11:40 -0700)]
MIPS: Replace some magic numbers with symbolic values in tlbex.c
The logic used to split the r4000 refill handler is liberally
sprinkled with magic numbers. We attempt to explain what they are and
normalize them against a new symbolic value (MIPS64_REFILL_INSNS).
CC: David VomLehn <dvomlehn@cisco.com> Reviewed-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Wed, 17 Jun 2009 10:06:24 +0000 (11:06 +0100)]
MIPS: SB1250: Sort out merge mistake.
A wrong resolution of a merge conflict made the recently deleted wrong
error check in sb1250_set_affinity. Send the zombie back to the empire
of the undead.
projects / people / ssmith / netchannel2-pvops.git / log