Wei Liu [Tue, 29 Jan 2019 12:59:55 +0000 (12:59 +0000)]
x86/mm: change pl3e to l3t in virt_to_xen_l3e
We will need to have a variable named pl3e when we rewrite
virt_to_xen_l3e. Change pl3e to l3t to reflect better its purpose.
This will make reviewing later patch easier.
Wei Liu [Tue, 29 Jan 2019 12:57:35 +0000 (12:57 +0000)]
x86/mm: change pl1e to l1t in virt_to_xen_l1e
We will need to have a variable named pl1e when we rewrite
virt_to_xen_l1e. Change pl1e to l1t to reflect better its purpose.
This will make reviewing later patch easier.
Wei Liu [Tue, 29 Jan 2019 12:54:48 +0000 (12:54 +0000)]
x86/mm: change pl2e to l2t in virt_to_xen_l2e
We will need to have a variable named pl2e when we rewrite
virt_to_xen_l2e. Change pl2e to l2t to reflect better its purpose.
This will make reviewing later patch easier.
Wei Liu [Mon, 28 Jan 2019 18:10:10 +0000 (18:10 +0000)]
x86/mm: introduce l{1,2}t local variables to modify_xen_mappings
The pl2e and pl1e variables are heavily (ab)used in that function. It
is fine at the moment because all page tables are always mapped so
there is no need to track the life time of each variable.
We will soon have the requirement to map and unmap page tables. We
need to track the life time of each variable to avoid leakage.
Introduce some l{1,2}t variables with limited scope so that we can
track life time of pointers to xen page tables more easily.
Wei Liu [Mon, 28 Jan 2019 17:54:24 +0000 (17:54 +0000)]
x86/mm: introduce l{1,2}t local variables to map_pages_to_xen
The pl2e and pl1e variables are heavily (ab)used in that function. It
is fine at the moment because all page tables are always mapped so
there is no need to track the life time of each variable.
We will soon have the requirement to map and unmap page tables. We
need to track the life time of each variable to avoid leakage.
Introduce some l{1,2}t variables with limited scope so that we can
track life time of pointers to xen page tables more easily.
Wei Liu [Wed, 23 Jan 2019 15:33:07 +0000 (15:33 +0000)]
x86: introduce a new set of APIs to manage Xen page tables
We are going to switch to using domheap page for page tables.
A new set of APIs is introduced to allocate, map, unmap and free pages
for page tables.
The allocation and deallocation work on mfn_t but not page_info,
because they are required to work even before frame table is set up.
Implement the old functions with the new ones. We will rewrite, site
by site, other mm functions that manipulate page tables to use the new
APIs.
Note these new APIs still use xenheap page underneath and no actual
map and unmap is done so that we don't break xen half way. They will
be switched to use domheap and dynamic mappings when usage of old APIs
is eliminated.
Peng Fan [Tue, 5 Feb 2019 05:55:35 +0000 (05:55 +0000)]
arm: gic-v3: deactivate interrupts during initialization
On i.MX8, we implemented partition reboot which means Cortex-A reboot
will not impact M4 cores and System control Unit core. However GICv3 is
not reset because we also need to support A72 Cluster reboot without
affecting A53 Cluster.
The gic-v3 controller is configured with EOImode to 1, so during xen
reboot, there is a function call "smp_call_function(halt_this_cpu, NULL, 0);"
but halt_this_cpu never returns, that means other CPUs have no chance to
deactivate the SGI interrupt, because the deactivate_irq operation is at
the end of do_sgi. During the next boot of Xen, CPU0 will issue
GIC_SGI_CALL_FUNCTION to other CPUs. As the Active state for SGI is left
untouched during the reboot, the GIC_SGI_CALL_FUNCTION will still be active
on the non-boot CPUs. This means the interrupt cannot be triggered again
until it get deactivated.
And according to IHI0069D_gic_architecture_specification, chapter
"8.11.3 GICR_ICACTIVER0, Interrupt Clear-Active Register 0", the RW
field of GICR_ICACTIVER0 resets to a value that is architecturally UNKNOWN.
So make sure all interrupts are deactivated during initialization by
clearing the state.
Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Wei Liu [Mon, 4 Feb 2019 13:58:24 +0000 (13:58 +0000)]
tools: drop obsolete xen-ringwatch
This utility can't possibly work with modern Xen setup: none of the
sysfs path used (under /sys/devices/xen-backend) is documented as
stable ABI in upstream Linux kernel.
Archaeology shows that the path used could have been part of the
xenolinux fork which never got upstreamed.
Its utility is zero nowadays. Drop it.
Signed-off-by: Wei Liu <wei.liu2@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Julien Grall [Mon, 28 Jan 2019 16:00:23 +0000 (16:00 +0000)]
xen/arm: irq: End cleanly spurious interrupt
no_irq_type handlers are used when an IRQ does not have action attached.
This is useful to detect misconfiguration between the interrupt
controller and the software.
Currently, all the handlers will do nothing on spurious interrupt. This
means if such interrupt is received, the priority of the interrupt will
not be dropped and the processor will lose the ability to receive any
interrupt lower or equal to the priority.
Spurious interrupt can happen while releasing interrupt assigned to
guest (happen during domain destruction). The interaction is roughly
Because the no_irq_type.end callback is implemented as a NOP, CPU1 will
not drop the priority of the interrupt. So the CPU will not be able to
receive any interrupt route to any guest afterwards.
The problem can be prevented by dropping the priority and deactivating
the interrupt via gic_hw_ops->gic_host_irq->end().
Note that, for now, interrupt used by Xen are safe because it is not
using no_irq_type on release.
xen-bugtool relies on code that has been removed in commit 9e8672f1c3
"tools: remove xend and associated python modules", more than 5 years
ago. Remove it, since it confuses users.
-$ /usr/sbin/xen-bugtool
Traceback (most recent call last):
File "/usr/sbin/xen-bugtool", line 9, in <module>
from xen.util import bugtool
ImportError: No module named xen.util
Anthony PERARD [Thu, 31 Jan 2019 10:57:48 +0000 (10:57 +0000)]
libxl: When restricted, start QEMU paused
libxl runs the command "cont" later during guest creation; i.e. it
is expecting that QEMU would not do any emulation. Use the "-S"
command option to achieve this.
Unfortunately, when QEMU is started with "-S", it won't write QEMU's
readiness into xenstore. So only activate this option when we have a
QEMU startup notification via QMP available, i.e. when dm_restrict
is activated.
The -S option has the side-effect of suppressing the startup
notification via xenstore: libxl will only get the notification via
QMP.
It is important to rely only on QMP for notification when we have
QMP available, as (due to a qemu bug) not waiting for that QMP
notification may result in the QMP socket becoming blocked, so that
QEMU stops responding to new connections even if no existing ones
are active.
When the QEMU bug happens, the actions taken by both libxl and QEMU
are roughly as follows:
- libxl connects and handshakes with QEMU, then sends the
cmd "query-status".
- QEMU prepares and maybe tries to send the response,
while also writing "running" into xenstore.
- libxl sees via xenstore that QEMU is running and disconnects from the
QMP socket before receiving the response from the cmd.
=> The QMP socket (monitor) is thereby blocked and will never reply
to commands on new connections.
This is due to QEMU only responding to one command at a time, and
suspending its monitor (QMP) until the command has been processed and
sent. Disconnecting from the socket doesn't unsuspend the monitor. The
race described here is very likely to happen with QEMU 3.1.50 (during
3.2 development), but can be reproduced with QEMU 3.1.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Drop the debug-only early exit if the sources of length disagree, because the
only effect it has it to avoid the more detailed analysis of what went wrong.
Reported-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Brian Woods <brian.woods@amd.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Thu, 13 Dec 2018 17:01:24 +0000 (17:01 +0000)]
x86/svm: Drop enum instruction_index and simplify svm_get_insn_len()
Passing a 32-bit integer index into an array with entries containing less than
32 bits of data is wasteful, and creates an unnecessary error condition of
passing an out-of-range index.
The width of the X86EMUL_OPC() encoding is currently 20 bits for the
instructions used, which leaves room for a modrm byte. Drop opc_tab[]
entirely, and encode the expected opcode/modrm information directly.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Brian Woods <brian.woods@amd.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Thu, 13 Dec 2018 17:01:24 +0000 (09:01 -0800)]
x86/svm: Remove list functionality from __get_instruction_length_* infrastructure
The existing __get_instruction_length_from_list() has a single user
which uses the list functionality. That user however should be looking
specifically for INVD or WBINVD, as reported by the vmexit exit reason.
Modify svm_vmexit_do_invalidate_cache() to ask for the correct
instruction, and drop all list functionality from the helper.
Take the opportunity to rename it to svm_get_insn_len(), and drop the
IOIO length handling which has never been used.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Brian Woods <brian.woods@amd.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Thu, 31 Jan 2019 10:38:24 +0000 (11:38 +0100)]
x86emul: correct AVX512BW write masking checks
For VPSADBW this likely was a result of bad copy-and-paste.
For VPS{L,R}LDQ comment and code were not in line, but then again the
comment also wasn't fully updated from the AVX2 original it got cloned
from.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Thu, 31 Jan 2019 10:37:56 +0000 (11:37 +0100)]
tools: fix build dependency upon generated header(s)
Commit fd35f32b4b ("tools/x86emul: Use struct cpuid_policy in the
userspace test harnesses") didn't account for the dependencies of
cpuid-autogen.h to potentially change between incremental builds.
Putting the make invocation to produce the header together with the
directory tree creation therefore does not work. Introduce a separate
goal.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Wei Liu [Wed, 30 Jan 2019 13:55:55 +0000 (13:55 +0000)]
x86/pvh-boot: don't mandate validity of RSDP pointer
RSDP is not mandatory according to PVH spec. Remove the BUG_ON. The
guest (xen) will fall back to scanning if necessary.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Andrew Cooper <andrew.cooepr3@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrii Anisov [Fri, 25 Jan 2019 17:06:02 +0000 (19:06 +0200)]
xen/arm: gic-vgic: Fix the assert condition in vgic_connect_hw_irq
Currently, the assert condition in vgic_connect_hw_irq does not
correspond to the comment above and result to hit the assertion
on HW IRQ disconnection.
Fix the condition so it corresponds to the comment and allows IRQ
disconnection on debug builds.
Fixes: ec2a2f1 ("ARM: VGIC: factor out vgic_connect_hw_irq()") Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Suggested-by: Stefan Nuernberger <snu@amazon.de> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
[julieng: Reword the commit message] Acked-by: Julien Grall <julien.grall@arm.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Wei Liu [Tue, 29 Jan 2019 11:37:59 +0000 (11:37 +0000)]
libxl: correctly dispose of dominfo list in libxl_name_to_domid
Tamas reported ssid_label was leaked. Use the designated function to
free dominfo list to fix the leakage.
Reported-by: Tamas K Lengyel <tamas@tklengyel.com> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Tested-by: Tamas K Lengyel <tamas@tklengyel.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Fri, 25 Jan 2019 16:23:46 +0000 (16:23 +0000)]
x86/hvm: Fix bit checking for CR4 and MSR_EFER
Before the cpuid_policy logic came along, %cr4/EFER auditing on migrate-in was
complicated, because at that point no CPUID information had been set for the
guest. Auditing against the host CPUID was better than nothing, but not
ideal.
Similarly at the time, PVHv1 lacked the "CPUID passed through from hardware"
behaviour with PV guests had, and PVH dom0 had to be special-cased to be able
to boot.
Order of information in the migration stream is still an issue (hence we still
need to keep the restore parameter to cope with a nested virt corner case for
%cr4), but since Xen 4.9, all domains start with a suitable CPUID policy,
which is a more appropriate upper bound than host_cpuid_policy.
Finally, reposition the UMIP logic as it is the only row out of order.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Tue, 22 Jan 2019 18:58:56 +0000 (18:58 +0000)]
x86/p2m: Drop erroneous #VE-enabled check in ept_set_entry()
Code clearing the "Suppress VE" bit in an EPT entry isn't nececsserily running
in current context. In ALTP2M_external mode, it definitely is not, and in PV
context, vcpu_altp2m(current) acts upon the HVM union.
Even if we could sensibly resolve the target vCPU, it may legitimately not be
fully set up at this point, so rejecting the EPT modification would be buggy.
There is a path in hvm_hap_nested_page_fault() which explicitly emulates #VE
in the cpu_has_vmx_virt_exceptions case, so the -EOPNOTSUPP part of this
condition is also wrong.
Drop the !sve check entirely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Razvan Cojocaru <rcojocaru@bitdefender.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Release-acked-by: Juergen Gross <jgross@suse.com>
In order to solve it move the vioapic_hwdom_map_gsi outside of the
locked region in vioapic_write_redirent. vioapic_hwdom_map_gsi will
not access any of the vioapic fields, so there's no need to call the
function holding the hvm.irq_lock.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Julien Grall [Mon, 28 Jan 2019 11:50:25 +0000 (11:50 +0000)]
xen/arm: Implement workaround for Cortex-A76 erratum 1165522
Early version of Cortex-A76 can end-up with corrupt TLBs if they
speculate an AT instruction while the S1/S2 system registers are in an
inconsistent state.
This can happen during guest context switch and when invalidating the
TLBs for other than the current VMID.
The workaround implemented in Xen will:
- Use an empty stage-2 with a reserved VMID while context switching
between 2 guests
- Use an empty stage-2 with the VMID where TLBs need to be flushed
Julien Grall [Mon, 28 Jan 2019 11:50:24 +0000 (11:50 +0000)]
xen/arm: p2m: Only use isb() when it is necessary
The EL1 translation regime is out-of-context when running at EL2. This
means the processor cannot speculate memory accesses using the registers
associated to that regime.
An isb() is only needed if Xen is going to use the translation regime
before returning to the guest (exception returns will synchronize the
context).
Remove unnecessary isb() and document the ones left.
Julien Grall [Mon, 28 Jan 2019 11:50:23 +0000 (11:50 +0000)]
xen/arm: domain_build: Don't switch to the guest P2M when copying data
Until recently, kernel/initrd/dtb were loaded using guest VA and
therefore requiring to restore temporarily the P2M. This was reworked
in a series of commits (up to 9292086 "xen/arm: domain_build: Use
copy_to_guest_phys_flush_dcache in dtb_load") to use a guest PA.
This will also help a follow-up patch which will require
p2m_{save,restore}_state to work in pair to workaround an erratum.
Jan Beulich [Mon, 28 Jan 2019 16:40:39 +0000 (17:40 +0100)]
x86/AMD: flush TLB after ucode update
The increased number of messages (spec_ctrl.c:print_details()) within a
certain time window made me notice some slowness of boot time screen
output. Experimentally I've narrowed the time window to be from
immediately after the early ucode update on the BSP to the PAT write in
cpu_init(), which upon further investigation has an effect because of
the full TLB flush that's implied by that write.
For that reason, as a workaround, flush the TLB of the mapping of the
page that holds the blob. Note that flushing just a single page is
sufficient: As per verify_patch_size() patch size can't exceed 4k, and
the way xmalloc() works the blob can't be crossing a page boundary.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Brian Woods <brian.woods@amd.com> Release-acked-by: Juergen Gross <jgross@suse.com>
During instruction emulation, the cpuid instruction is emulated with
data that is controlled by the guest. As speculation might pass bound
checks, we have to ensure that no out-of-bound loads are possible.
To not rely on the compiler to perform value propagation, instead of
using the array_index_nospec macro, we replace the variable with the
constant to be propagated instead.
This commit is part of the SpectreV1+L1TF mitigation patch series.
When interacting with hpet, read and write operations can be executed
during instruction emulation, where the guest controls the data that
is used. As it is hard to predict the number of instructions that are
executed speculatively, we prevent out-of-bound accesses by using the
array_index_nospec function for guest specified addresses that should
be used for hpet operations.
We introduce another macro that uses the ARRAY_SIZE macro to block
speculative accesses. For arrays that are statically accessed, this macro
can be used instead of the usual macro. Using this macro results in more
readable code, and allows to modify the way this case is handled in a
single place.
This commit is part of the SpectreV1+L1TF mitigation patch series.
George Dunlap [Thu, 24 Jan 2019 17:48:27 +0000 (17:48 +0000)]
docs: Fix dm_restrict documentation
Remove "chatty" and redundant information from the xl man page;
restrict it to functional descriptions only, and point instead to
qemu-depriv.pandoc and SUPPORT.md as locations for "canonical"
information.
Add a man page entry for device_model_user.
Update qemu-deprivilege.pandoc:
Changes in missing feature list:
- Migration is functional
- But qdisk backends are not
Add a missing restriction list.
The following statements from the man page are dropped:
- Mentioning PV; PV guests never have a device model.
- Drop the confusing statement about stdvga and cirrus vga options.
- Re-used domain IDs are now handled.
- Device models should no longer be able to create world-readable
files on dom0's filesystem.
Signed-off-by: George Dunlap <george.dunlap@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Thu, 24 Jul 2014 10:06:39 +0000 (11:06 +0100)]
xen/sched: Introduce domain_vcpu() helper
The progression of multi-vcpu support in Xen (originally a single pointer,
then an embedded d->vcpu[] array, then a dynamically allocated array) has
resulted in a large quantity of ad-hoc code for looking a vcpu up by id, and a
large number of ways that the toolstack can cause Xen to trip over a NULL
pointer. Some of this has been addressed in Xen 4.12, and work is ongoing.
Another property of looking a vcpu up by id is that it is frequently done in
unprivileged hypercall context, making it an attractive target for speculative
sidechannel attacks.
Introduce a helper to do the lookup correctly, and without speculative
interference. For performance reasons, it is useful not to have an smp_rmb()
in this helper on ARM, and luckily this is safe to do, because of the
serialisation offered by the global domlist lock.
As a minor change noticed when checking the safety of this construct, sanity
check during boot that idle->max_vcpus is a suitable upper bound for
idle->vcpu[].
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
Andrew Cooper [Fri, 21 Dec 2018 17:23:32 +0000 (17:23 +0000)]
x86/pvh-dom0: Remove unnecessary function pointer call from modify_identity_mmio()
Function pointer calls are far more expensive in a post-Spectre world, and
this one doesn't need to be.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Acked-by: Jan Beulich <jbeulich@suse.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Fri, 7 Dec 2018 13:43:27 +0000 (13:43 +0000)]
xen/dom0: Add a dom0-iommu=none option
For development purposes, it is very convenient to boot Xen as a PVH guest,
with an XTF PV or PVH "dom0". The edit-compile-go cycle is a matter of
seconds, and you can reasonably insert printk() debugging in places which
which would be completely infeasible when booting fully-fledged guests.
However, the PVH dom0 path insists on having a working IOMMU, which doesn't
exist when virtualised as a PVH guest, and isn't necessary for XTF anyway.
Introduce a developer mode to skip the IOMMU requirement.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com> Acked-by: Jan Beulich <jbeulich@suse.com>
Andrew Cooper [Mon, 31 Dec 2018 14:06:52 +0000 (14:06 +0000)]
xen/dom0: Deprecate iommu_hwdom_inclusive and leave it disabled by default
This option is unique to x86 PV dom0's, but it is not sensible to have a
catch-all which blindly maps all non-RAM regions into the IOMMU.
The map-reserved option remains, and covers all the buggy firmware issues that
I am aware of. The two common cases are legacy USB keyboard emulation, and
the BMC mailbox used by vendor firmware in NICs/HBAs to report information
back to the iLO/iDRAC/etc for remote remote management purposes.
A specific advantage of this change is that x86 dom0's IOMMU setup is now
consistent between PV and PVH.
This change is not expected to have any impact, due to map-reserved remaining.
In the unlikely case that it does cause an issue, we should introduce other
map-$SPECIFIC options rather than re-introducing this catch-all.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
Andrew Cooper [Mon, 10 Dec 2018 21:29:10 +0000 (21:29 +0000)]
docs: Improve documentation and parsing for efi=
Update parse_efi_param() to use parse_boolean() for "rs", so it behaves
like other Xen booleans.
However, change "attr=uc" to not be a boolean. "no-attr=uc" is ambiguous and
shouldn't be accepted, but accept "attr=no" as an acceptable alternative.
Update the command line documentation for consistency.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
Julien Grall [Fri, 30 Nov 2018 17:15:33 +0000 (17:15 +0000)]
xen/arm: gic: Make sure the number of interrupt lines is valid before using it
GICv2 and GICv3 supports up to 1020 interrupts. However, the value computed
from GICD_TYPER.ITLinesNumber can be up to 1024. On GICv3, we will end up to
write in reserved registers that are right after the IROUTERs one as the
value is not capped early enough.
Cap the number of interrupts as soon as we compute it so we know we can
safely using it afterwards.
Andrii Anisov [Wed, 23 Jan 2019 12:50:07 +0000 (14:50 +0200)]
arm/p2m: call iommu iotlb flush if iommu exists and enabled
Taking decision by `need_iommu_pt_sync()` make us never kicking
`iommu_iotlb_flush()` for IOMMUs which do share P2M with CPU.
So check `has_iommu_pt()` instead.
Signed-off-by: Andrii Anisov <andrii_anisov@epam.com> Reviewed-by: Paul Durant <paul.durrant@citrix.com> Release-Acked-by: Juergen Gross <jgross@suse.com> Acked-by: Julien Grall <julien.grall@arm.com>
Anthony PERARD [Wed, 16 Jan 2019 16:16:56 +0000 (16:16 +0000)]
docs: Fix all links to Xen man pages in html
Second try, this time also works for all links to xen-vbd-interface(7).
We don't try anymore to have pod2html generate relative links, instead
we do it ourself.
First, we modify all links to man pages to have what looks like an
absolute URL and pod2html will just write it in the html output.
Absolute URL in POD are in the form L<text|scheme:...> so let's just use
a scheme that isn't real, but easy to find in the resulting html output:
"relative:".
Then we fix the output and remove all the bogus scheme "relative" and
can end up with nice relative links.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Anthony PERARD [Wed, 16 Jan 2019 16:16:57 +0000 (16:16 +0000)]
man: Highlight reference in xl-disk-configuration(5)
Provide a better way to see the link to a different manpage, with simple
words.
Suggested-by: Ian Jackson <ian.jackson@citrix.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Fri, 7 Dec 2018 13:43:27 +0000 (13:43 +0000)]
x86/dom0: Improve dom0= useability
Having a pvh boolean isn't ideal. If we gain a 3rd virtulsation mode,
what does `dom0=no-pvh` mean?
Change the syntax to be "dom0 = pv | pvh" which offers an option to more
obviously select PV mode. Hide both options behind the relevent
CONFIG_* settings, and default to PVH mode when CONFIG_PV is compiled
out.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Thu, 27 Dec 2018 18:40:19 +0000 (18:40 +0000)]
docs: Improve documentation and parsing for pci=
Alter parse_pci_param() to use parse_boolean(), so the sub options
behave like other Xen booleans.
Update the command line documentation for consistency.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Thu, 27 Dec 2018 18:40:19 +0000 (18:40 +0000)]
docs: Improve documentation and parsing for iommu=
Update parse_iommu_param() to uniformly use parse_boolean(), so the sub
booleans behave like other Xen boolean options. Reposition the
custom_param() to avoid a forward declaration of parse_iommu_param().
Rewrite the command line documentation almost from scratch, including
far more detail.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Fri, 7 Dec 2018 13:43:27 +0000 (13:43 +0000)]
docs: Improve documentation for dom0= and dom0-iommu=
Update to the latest metadata style, and discuss the options more
completely where appropriate.
Drop the redundant comment beside parse_dom0_param() - it is already out
of sync with the main documentation. Also drop the individual
documentation for deprecated options which refer to their newer
versions, for the same reason.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Razvan Cojocaru [Mon, 21 Jan 2019 11:13:22 +0000 (12:13 +0100)]
x86/vm_event: block interrupt injection for sync vm_events
Block interrupts (in vmx_intr_assist()) for the duration of
processing a sync vm_event (similarly to the strategy
currently used for single-stepping). Otherwise, attempting
to emulate an instruction when requested by a vm_event
reply may legitimately need to call e.g.
hvm_inject_page_fault(), which then overwrites the active
interrupt in the VMCS.
The sync vm_event handling path on x86/VMX is (roughly):
monitor_traps() -> process vm_event -> vmx_intr_assist()
(possibly writing VM_ENTRY_INTR_INFO) ->
hvm_vm_event_do_resume() -> hvm_emulate_one_vm_event()
(possibly overwriting the VM_ENTRY_INTR_INFO value).
This patch may also be helpful for the future removal
of may_defer in hvm_set_cr{0,3,4} and hvm_set_msr().
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by: Tamas K Lengyel <tamas@tklengyel.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Ian Jackson [Mon, 14 Jan 2019 14:59:37 +0000 (14:59 +0000)]
libxl: fix build (missing CLONE_NEWIPC) on astonishingly old systems
CLONE_NEWIPC was introduced in Linux 2.6.19, on the 29th of November
2006, which was 12 years, 1 month, and 14 days ago.
Nevertheless apparently some people are trying to build Xen on systems
whose kernel headers are that old. Placate these people by providing
a fallback #define for CLONE_NEWIPC.
The actual binary value will of course remain constant, because of the
kernel API promise, so this is and will be correct on all platforms
where the CLONE_NEWIPC is supported. (Even if for some reason we miss
the right #includes.)
Of course at runtime this value will not work on older kernels. It
will be rejected as unknown by anything except some pre-2.6.18
kernels. On those kernels we do not want to support dm_restrict, and
an attempt to use it will fail. It is OK for the failure to be a
messy EINVAL syscall failure. (The IPC namespace unshare is necessary
to avoid a suborned deprivileged qemu from causing trouble with shm,
sem, etc.)
On the very old kernels, the feature is totally out of scope.
(We are only interested, here, in making the build work, to avoid
blocking people who aren't using this feature.)
CC: Wei Liu <wei.liu2@citrix.com> CC: Juergen Gross <jgross@suse.com> CC: Jan Beulich <JBeulich@suse.com> Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Ian Jackson [Mon, 14 Jan 2019 14:59:35 +0000 (14:59 +0000)]
docs/features/qemu-deprivilege.pandoc: No support with Linux <2.6.18
Some early kernels are known not to reject unknown flags to
unshare(). There may be other problems.
CC: Jan Beulich <JBeulich@suse.com> Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Anthony PERARD [Tue, 15 Jan 2019 15:48:37 +0000 (15:48 +0000)]
docs: Fix links in html generation of man pages
Currently, all links to other man pages are sent to
http://man.he.net/man$mansection/$manpage, but that site doesn't have
Xen man pages, so all links to other Xen man pages are broken.
In order to fix that, this is going to be a bit complex.
First, we need to teach pod2html on where other .pod files can be found,
otherwise it isn't going make any links to our pages. This is done with
--podpath.
Second, pod2html doesn't actually understand our format
"$manpage.$mansection.pod". But instead of teaching it (which is
probably impossible) we are going to modify our .pod files in order to
tell pod2html which file to look for. This is done with the sed command
by transforming for example: "L<xl.conf(5)>" to "L<xl.conf(5)|xl.conf.5>".
Last but not least, in order to have relative links to the other
generated man page, we are going against the rules, we are going to use
"--htmlroot=." so that pod2html doesn't prepand "/" to all "relative"
links. We are also going to `cd` into the "man" dir and set podpath to
"." so that pod2html is going to generate relative links to other pod
file in the form "./$man" insteadof "man/$man" or "../$man" with other
compination of options. The result of --podpath + --podroot can be check
in pod2html's cache file "pod2html.tmp".
All of this is going to generate links in the form "./$html_manpage".
But all of this doesn't work for xen-vbd-interface(7), because it's not
a pod file... maybe we could generate pod2html's cache (pod2html.tmp)
file to add en entry.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Anthony PERARD [Tue, 15 Jan 2019 15:48:36 +0000 (15:48 +0000)]
man: Fix links in xl(1)
All links to other manpages should contain the man section number.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Andrew Cooper [Fri, 7 Dec 2018 13:43:27 +0000 (13:43 +0000)]
xen/cmdline: Fix buggy strncmp(s, LITERAL, ss - s) construct
When the command line parsing was updated to use const strings and no longer
tokenise with NUL characters, string matches could no longer be made with
strcmp().
Unfortunately, the replacement was buggy. strncmp(s, "opt", ss - s) matches
"o", "op" and "opt" on the command line, as ss - s may be shorter than the
passed literal. Furthermore, parse_bool() is affected by this, so substrings
such as "d", "e" and "o" are considered valid, with the latter being ambiguous
between "on" and "off".
Introduce a new strcmp-like function for the task, which looks for exact
string matches, but declares success when the NUL of the literal matches a
comma, colon or semicolon in the command line fragment.
No change to the intended parsing functionality, but fixes cases where a
partial string on the command line will inadvertently trigger options.
A few areas were more than just a trivial change:
* parse_irq_vector_map_param() gained some style corrections.
* parse_vpmu_params() was rewritten to use the normal list-of-options form,
rather than just fixing up parse_vpmu_param() and leaving the parsing being
hard to follow.
* Instead of making the trivial fix of adding an explicit length check in
parse_bool(), use the length to select which token to we search for, which
is more efficient than the previous linear search over all possible tokens.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Julien Grall <julien.grall@arm.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Coverity understandably complains that get_reaper_lock_and_uid leaks
the fd and hence open-file. But this is intentional: the lock becomes
owned by the child process as a whole, which is entirely the property
of libxl.
(The coding style here in this subprocess is a bit anomalous but it's
probably not worth it to convert get_reaper_lock_and_uid to `goto out'
style and have it explicitly return the fd number.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com> Acked-by: George Dunlap <george.dunlap@citrix.com>
Jan Beulich [Fri, 11 Jan 2019 10:09:35 +0000 (03:09 -0700)]
libxl: fix build on rather old systems
CLONE_NEWIPC has been introduced in Linux 2.6.19 only (and into glibc
at around that time as well). Cope with it being undefined as well as
with the underlying kernel not knowing of it.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Release-acked-by: Juergen Gross <jgross@suse.com>
Anthony PERARD [Fri, 4 Jan 2019 13:53:21 +0000 (13:53 +0000)]
libxl_json: Remove libxl__json_object_append_to from header
It isn't possible to use libxl__json_object_append_to() outside of
libxl_json.c as there is no way to allocate a struct libxl__yajl_ctx.
So also remove libxl__yajl_ctx typedef from the internal header.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Anthony PERARD [Wed, 25 Jul 2018 15:16:32 +0000 (16:16 +0100)]
libxl: Re-implement domain_suspend_device_model using libxl__ev_qmp
The re-implementation is done because we want to be able to send the
file description that QEMU can use to save its state. When QEMU is
restricted, it would not be able to write to a path.
This replace both libxl__qmp_stop() and libxl__qmp_save().
qmp_qemu_check_version() was only used by libxl__qmp_save(), so it is
replace by a version using libxl__ev_qmp instead.
Coding style fixed in libxl__domain_suspend_device_model() for the
return value.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Anthony PERARD [Wed, 25 Jul 2018 15:03:09 +0000 (16:03 +0100)]
libxl: Change libxl__domain_suspend_device_model() to be async
This create an extra step for the two call sites of the function.
libxl__domain_suspend_device_model() in this patch gets an extra error
variable (there is ret and rc), but ret goes away in the next patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
libxl_domain_soft_reset() haven't been tested, as it doesn't appear to
possible to call the function from xl.
Anthony PERARD [Thu, 31 May 2018 13:45:12 +0000 (14:45 +0100)]
libxl: QEMU startup sync based on QMP
This is only activated when dm_restrict=1, as explained in a previous
patch "libxl_dm: Pre-open QMP socket for QEMU"
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Anthony PERARD [Thu, 22 Nov 2018 12:09:37 +0000 (12:09 +0000)]
libxl: Add dmss_init/dispose for libxl__dm_spawn_state
These two functions, dmss_init and dmss_dispose, need to be called to
initialise the private parts of a libxl__dm_spawn_state (dmss) as well
as dispose of them before giving back control to a caller.
There are 3 functions that can start using a dmss, the classic
libxl__spawn_local_dm, the one for stubdom libxl__spawn_stub_dm and
libxl__spawn_qdisk_backend. But there are only 2 exit path as
libxl__spawn_qdisk_backend is using libxl__spawn_local_dm functions.
These two new functions are empty but will be used shortly.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Anthony PERARD [Thu, 31 May 2018 13:43:20 +0000 (14:43 +0100)]
libxl_dm: Pre-open QMP socket for QEMU
This patch moves the creation of the QMP unix socket from QEMU to libxl.
But libxl doesn't rely on this yet.
When starting QEMU with dm_restrict=1, pre-open the QMP socket before
exec QEMU. That socket will be useful to find out if QEMU is ready, and
pre-opening it means that libxl can connect to it without waiting for
QEMU to create it.
The pre-opening is conditional, based on the use of dm_restrict
because it is using a new command line option of QEMU, and dm_restrict
support in QEMU is newer.
-chardev socket,fd=X is available with QEMU 2.12, since commit:
> char: allow passing pre-opened socket file descriptor at startup
> 0935700f8544033ebbd41e1f13cd528f8a58d24d
dm_restrict is available in QEMU 3.0.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
projects / people / liuw / xen.git / log