Michal Privoznik [Sat, 15 Jun 2019 06:25:33 +0000 (08:25 +0200)]
virHostdevGetPCIHostDeviceList: Add @pci a bit later
This function is a good candidate for VIR_AUTOPTR() conversion.
But this conversion will be easier if we only add @pci device
onto @pcidevs list after it was all set up.
This is no functional change.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Thu, 23 May 2019 09:00:27 +0000 (11:00 +0200)]
qemuProcessLaunch: Return earlier if spawning qemu failed
If spawning qemu fails then we report an error and proceed to
writing status XML onto the disk. This is unnecessary as we are
sure that the domain is not running.
At the same time, if virPidFileReadPath() fails it returns
-errno. Use it in the error message. It may explain what went
wrong.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
We support pcie-to-pci-bridge, and prefer it to
dmi-to-pci-bridge, since libvirt 4.3.0, but we didn't
update all the documentation accordingly at the time.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 10 Apr 2019 12:52:48 +0000 (14:52 +0200)]
qemu: qapi: Implement support for 'features'
Starting from version 4.1 qemu allows reporting 'features' for a given
QAPI type object. This allows reporting support of fixes and additions
which are otherwise invisible in the QAPI schema.
Implement a possibility to query 'features' in the QAPI query strings.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Peter Krempa [Thu, 20 Jun 2019 05:47:43 +0000 (07:47 +0200)]
tests: qemucaps: Update 4.1.0 capabilities to a more recent version
Update the capabilities from a non-upstream version (9c70209b63 is not
in qemu.git) to qemu upstream commit 33d6099906 (2019/06/18) so that we
get the QMP schema 'features' field support and are able to detect that
the 'file' block backend supports dynamic auto-read-only.
Note that I've rebuilt this on a machine with a more modern kernel and
microcode which exposes e.g. the recent CPU bug mitigations, thus I
opted to keep the CPU changes rather than trying to do a franken-caps
by updating only the output of query-qmp-schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com>
When updating guest CPU definition according to the vCPU actually
created by QEMU, we want to use the generic qemuMonitorGetGuestCPU to
get both CPUID and MSR features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Mon, 17 Jun 2019 21:36:53 +0000 (23:36 +0200)]
qemu: Introduce generic qemuMonitorGetGuestCPU
Unlike the old version (which is now called qemuMonitorGetGuestCPUx86),
this monitor API checks for individual features by their names rather
than processing CPUID bits. Thus we can get the list of enabled and
disabled features for both CPUID and MSR features.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Mon, 17 Jun 2019 19:51:20 +0000 (21:51 +0200)]
qemu: Add type filter to qemuMonitorJSONParsePropsList
The function converts a list of QOM properties into a NULL-terminated
array of property names. The new type parameter may be used to limit the
result to properties of a specific type.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Mon, 17 Jun 2019 14:56:32 +0000 (16:56 +0200)]
qemu: Make qemuMonitorGetGuestCPU usable on x86 only
It was never implemented or used for anything else anyway. Mainly
because it uses CPUID features bits. The function is renamed as
qemuMonitorGetGuestCPUx86 to make this explicit.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Wed, 12 Jun 2019 11:54:27 +0000 (13:54 +0200)]
qemu: Don't use full CPU model expansion
We used type=full expansion on the result of previous type=static
expansion to get all possible spellings of CPU features. Since we can
now translate the QEMU's canonical names to our names, we can drop this
magic and do only type=static CPU model expansion.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Mon, 17 Jun 2019 11:54:53 +0000 (13:54 +0200)]
qemu: Translate feature names from query-cpu-model-expansion
By default query-cpu-model-expansion only reports canonical names of all
CPU features. We do some magic and call the command twice to get all
possible spellings of the features, but being able to consume canonical
names will allow us to drop this magic.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Fri, 7 Jun 2019 13:00:28 +0000 (15:00 +0200)]
qemu_command: Use canonical names of CPU features
When building QEMU command line, we should use the preferred spelling of
each CPU feature without relying on compatibility aliases (which may be
removed at some point).
The "unavailable-features" CPU property is used as a witness for the
correct names of the features in our translation table.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Mon, 10 Jun 2019 14:49:22 +0000 (16:49 +0200)]
qemu: Probe for "unavailable-features" CPU property
It is similar to "filtered-features" property, which reports CPUID bits
corresponding to disabled features, but more general. The
"unavailable-features" property supports both CPUID and MSR features by
listing their names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Thu, 6 Jun 2019 07:27:18 +0000 (09:27 +0200)]
qemu: Add APIs for translating CPU features
So far we always used libvirt's name of each CPU feature relying on
backward compatible aliases in QEMU. The new translation table can be
used whenever QEMU mandates or prefers canonical feature names.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Tue, 11 Jun 2019 14:44:36 +0000 (16:44 +0200)]
qemuxml2argvtest: Add 4.0.0 cases for kvm features tests
Newer QEMU will translate the feature names to their canonical names so
4.0.0 is the last one which produces the results we currently have in
*-latest.args.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Wed, 12 Jun 2019 10:08:06 +0000 (12:08 +0200)]
qemuxml2argvtest: Switch some tests to DO_TEST_CAPS_*
These test check all kvm CPU features that could be passed to the -cpu
option by libvirt.
The 2.7.0 version is the last one for which we use +|-feature syntax for
CPU features, while feature=on|off is used with newer versions. This
is visible in the following patch which changes only the *-latest.args
files.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Thu, 6 Jun 2019 12:51:14 +0000 (14:51 +0200)]
qemu: Filter CPU features in active XML
Properly filter features which should not be passed to QEMU because they
were never supported by QEMU or they did nothing and QEMU dropped them.
Currently they are just silently ignored by the command line generator.
Let's make this process more visible and clean by dropping the features
from the domain's active definition in qemuProcessUpdateGuestCPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Jiri Denemark [Thu, 6 Jun 2019 12:39:52 +0000 (14:39 +0200)]
qemu: Drop qemuFeatureNoEffect
We already have virQEMUCapsCPUFilterFeatures for filtering features
which QEMU does not know about. Let's move osxsave and ospke from
qemuFeatureNoEffect there.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Ilias Stamatis [Tue, 4 Jun 2019 13:17:43 +0000 (15:17 +0200)]
test_driver: implement virDomainSendProcessSignal
Only succeed when @pid_value is 1, since according to the docs this is
the minimum requirement for any driver to implement this API.
Since this is test driver, we assume that any signal from the supported
list can be sent to pid 1 and we therefore succeed every time.
Signed-off-by: Ilias Stamatis <stamatis.iliass@gmail.com> Reviewed-by: Erik Skultety <eskultet@redhat.com>
remote: remove obsolete & incorrect comment from libvirtd.conf
The libvirtd.conf file has a comment pointing people to format.html
which has nothing todo with the configuration file format.
It also has a comment about tests/daemon-conf which no longer exists,
and even if it did exist such comment is not relevant to end users
when this file is installed in /etc/.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
apparmor: Add openGraphicsFD rule for named profile
Commit a3ab6d42 changed the libvirtd profile to a named profile
but neglected to accommodate the change in the qemu profile
ptrace and signal rules.
Later on 4ec3cf9a fixed that for ptrace and signal but openGraphicsFD
is still missing.
As a result, libvirtd is unable to open UI on libvirt >=5.1 e.g. with
virt-manager.
Add openGraphicsFD rule that references the libvirtd profile
by name in addition to full binary path.
Fixes: https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1833040 Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Yi Li [Sun, 28 Apr 2019 02:29:53 +0000 (10:29 +0800)]
storage: escape ipv6 for ceph mon hosts to librados
Hosts for rbd are ceph monitor daemons. These have fixed IP addresses,
so they are often referenced by IP rather than hostname for
convenience, or to avoid relying on DNS. Using IPv4 addresses as the
host name works already, but IPv6 addresses require rbd-specific
escaping because the colon is used as an option separator in the
string passed to librados.
Escape these colons, and enclose the IPv6 address in square brackets
so it is distinguished from the port, which is currently mandatory.
Signed-off-by: Yi Li <yili@winhong.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Mon, 17 Jun 2019 16:19:03 +0000 (18:19 +0200)]
Produce more verbose error if cppi not found
It's fairly easy (especially for new contributors) to not spot
the 'cppi not installed' line in the syntax-check output. Add a
banner that is shown at the end of syntax-check output if no cppi
was found.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> ACKed-by: Andrea Bolognani <abologna@redhat.com>
The various steps involved in reconnecting to a domain may cause updates
to the virDomainObj struct that need to be reflected in the saved status
file.
Reviewed-by: Laine Stump <laine@laine.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
lxc, libxl: notify network driver of NICs during reconnect
When starting up it is important to notify the network driver of any
NICs which are used by running guests so that it can account for any
resources they are using.
Reviewed-by: Laine Stump <laine@laine.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This initial implementation just wires up the APIs and does tracking of
the port XML definitions. It is not yet integrated into the resource
allocation logic.
Reviewed-by: Laine Stump <laine@laine.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: support recording ports against virNetworkObjPtr
The virNetworkObjPtr state will need to maintain a record of all
virNetworkPortDefPtr objects associated with the network. Record these
in a hash and add APIs for manipulating them.
Reviewed-by: Laine Stump <laine@laine.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
projects / libvirt.git / log