edgar_igl [Sun, 7 Dec 2008 00:14:21 +0000 (00:14 +0000)]
ETRAX-FS: Simplify the DMA blocks address registration and decoding.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5898 c046a42c-6fe2-441c-8c8c-71466251a162
edgar_igl [Sat, 6 Dec 2008 23:19:03 +0000 (23:19 +0000)]
ETRAX-FS: No need to decode the address anymore.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5897 c046a42c-6fe2-441c-8c8c-71466251a162
blueswir1 [Fri, 5 Dec 2008 17:53:21 +0000 (17:53 +0000)]
sys-queue.h defines _SYS_QUEUE_H_ which is also defined by
the <sys/queue.h> system header. <sys/disk.h> uses SLIST_ENTRY
on NetBSD, which doesn't exist in sys-queue.h. Therefore,
include <sys/queue.h> before including sys-queue.h.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5885 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Thu, 4 Dec 2008 22:36:38 +0000 (22:36 +0000)]
do boundary check based on absolute value (Glauber Costa)
For backward operations, dstpitch and srcpitch can
be negative. This leads BLTUNSAFE macro into an
overflow, and as a result, it avoids performing
operations that are perfectly valid.
The visible effect that led to that patch was the gnome-panel
bar in Fedora10. Before this patch, you could see garbage
clobbering a big portion of the bar.
After this patch, this garbage is gone.
Signed-off-by: Glauber Costa <glommer@redhat.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5880 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Thu, 4 Dec 2008 21:39:21 +0000 (21:39 +0000)]
Use writeback caching by default with qcow2
qcow2 writes a cluster reference count on every cluster update. This causes
performance to crater when using anything but cache=writeback. This is most
noticeable when using savevm. Right now, qcow2 isn't a reliable format
regardless of the type of cache your using because metadata is not updated in
the correct order. Considering this, I think it's somewhat reasonable to use
writeback caching by default with qcow2 files.
It at least avoids the massive performance regression for users until we sort
out the issues in qcow2.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5879 c046a42c-6fe2-441c-8c8c-71466251a162
aurel32 [Thu, 4 Dec 2008 21:34:52 +0000 (21:34 +0000)]
Fix RTC initial date computation
qemu_get_clock() returns a structure containing the time the user wants
to be set (either UTC time, a local time, or a given date). Use mktimegm()
instead of mktime() to convert it into POSIX time without taking the host
timezone into account.
aliguori [Thu, 4 Dec 2008 20:33:06 +0000 (20:33 +0000)]
Add virtio-balloon support
This adds a VirtIO based balloon driver. It uses madvise() to actually balloon
the memory when possible.
Until 2.6.27, KVM forced memory pinning so we must disable ballooning unless the
kernel actually supports it when using KVM. It's always safe when using TCG.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5874 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Thu, 4 Dec 2008 20:19:35 +0000 (20:19 +0000)]
Add ballooning infrastructure.
Balloon devices allow you to ask the guest to allocate memory. This allows you
to release that memory. It's mostly useful for freeing up large chunks of
memory from cooperative guests.
Ballooning is supported by both Xen and VirtIO.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5873 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Thu, 4 Dec 2008 19:58:45 +0000 (19:58 +0000)]
Remove TARGET_PAGE_SIZE from virtio interface (Hollis Blanchard)
TARGET_PAGE_SIZE should only be used internal to qemu, not in guest/host
interfaces. The virtio frontend code in Linux uses two constants (PFN shift
and vring alignment) for the interface, so update qemu to match.
I've tested this with PowerPC KVM and confirmed that it fixes virtio problems
when using non-TARGET_PAGE_SIZE pages in the guest.
aliguori [Thu, 4 Dec 2008 19:38:57 +0000 (19:38 +0000)]
Virtio core support
This patch adds core support for VirtIO. VirtIO is a paravirtualization
framework that has been in Linux since 2.6.21. A PCI transport has been
available since 2.6.25. Network drivers are also available for Windows.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5869 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Tue, 2 Dec 2008 20:14:05 +0000 (20:14 +0000)]
Change order of metadata update to prevent loosing guest data because of unexpected exit (Gleb Natapov)
Currently the order is this (during cow since it's the interesting case):
1. Decrement refcount of old clusters
2. Increment refcount for newly allocated clusters
3. Copy content of old sectors that will not be rewritten
4. Update L2 table with pointers to new clusters
5. Write guest data into new clusters (asynchronously)
There are several problems with this order. The first one is that if qemu
crashes (or killed or host reboots) after new clusters are linked into L2
table but before user data is written there, then on the next reboot guest
will find neither old data nor new one in those sectors and this is not
what gust expects even when journaling file system is in use. The other
problem is that if qemu is killed between steps 1 and 4 then refcount
of old cluster will be incorrect and may cause snapshot corruption.
The patch change the order to be like this:
1. Increment refcount for newly allocated clusters
2. Write guest data into new clusters (asynchronously)
3. Copy content of old sectors that were not rewritten
4. Update L2 table with pointers to new clusters
5. Decrement refcount of old clusters
Unexpected crash may cause cluster leakage, but guest data should be safe.
aliguori [Tue, 2 Dec 2008 20:10:14 +0000 (20:10 +0000)]
Write table offset and size in one syscall (Gleb Natapov)
Otherwise if VM is killed between two writes data may be lost.
But if offset and size fields are at the same disk block one
write should update them both simultaneously.
aliguori [Tue, 2 Dec 2008 20:02:14 +0000 (20:02 +0000)]
Exclude unix: from vnc call to unix_listen() (Ryan Harper)
When using an existing unix socket like:
-vnc unix:/tmp/file1Y2nY2
qemu fails to bind a unix socket because the vnc call to unix_listen includes
the unix: prefix and stores that in the unix.sun_path. The fix is to not pass
in unix: for the filename (same way qemu-char.c does it).
Signed-off-by: Ryan Harper <ryanh@us.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5856 c046a42c-6fe2-441c-8c8c-71466251a162
malc [Mon, 1 Dec 2008 20:57:52 +0000 (20:57 +0000)]
Reset the key modifiers upon client connect
VNC should not maintain modifer state upon reconnects With some window
managers/vnc clients it will only see a key down event for a modifier
followed by immediate disconnect(think Alt-F4), with a net effect of
subsequently connected clients operating as if the modifier was never
released.
malc [Mon, 1 Dec 2008 20:57:48 +0000 (20:57 +0000)]
Add basic audio functionality to vnc.c
This allows among other things to capturing A/V of running
guests. Ad-hoc client that does this (via script that invokes ffmpeg)
can be found at:
http://repo.or.cz/w/qemu/malc.git?a=tree;f=vcap;hb=capture3
Thanks to Anthony Liguori for comments and review.
balrog [Mon, 1 Dec 2008 11:57:21 +0000 (11:57 +0000)]
arm: Don't potentially overwrite input registers in add2, sub2.
According to malc TCG will often genereate an add2/sub2/mul2 with low
half of the output in the same register as high half of one of the
inputs, so account for that.
balrog [Mon, 1 Dec 2008 02:17:12 +0000 (02:17 +0000)]
Don't rely on ARM tcg_out_goto() generating just a single insn.
Otherwise when tb_exit generates a jump beyond the pc-relative range,
tcg_out_goto() spans two/three instructions and we load the tb return
value from a wrong address. This is #ifdefed out currently because
we take care for the jumps to be local.
Problem spotted by Steffen Liebergeld.
aurel32 [Sun, 30 Nov 2008 19:12:49 +0000 (19:12 +0000)]
qemu-img: open files with cache=writeback
Data integrity is not important in qemu-img, so open the files with
cache=writeback. This fixes the performance regression seen with qemu-img
since revision 5485, and most particularly with the qcow2 format.
aurel32 [Sun, 30 Nov 2008 16:23:09 +0000 (16:23 +0000)]
Common cpu_loop_exit prototype
All archs use the same cpu_loop_exit, so move the prototype in a common
header. i386 was carrying a __hidden attribute, but that was empty for
this arch anyway.
blueswir1 [Sat, 29 Nov 2008 16:48:29 +0000 (16:48 +0000)]
Fix configuration 2 register (esp_2_cfg2.diff):
According to http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt,
"Any bit pattern written to this register may be read back and should be identical"
blueswir1 [Sat, 29 Nov 2008 16:45:28 +0000 (16:45 +0000)]
Misc fixes (Herve Poussineau)
- Fix internal fifo size (16 bytes), according to http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt
- Fix values of STAT_MI and STAT_MO
- Give a scsi ID to adapter, and prevent this ID to be used by devices
- Prevent fifo overrun in esp_mem_writeb
- Add a ESP_ERROR macro, and use it where appropriate
projects / qemu-xen-3.4-testing.git / log