Peter Krempa [Thu, 26 Oct 2023 13:05:41 +0000 (15:05 +0200)]
qemu: process: Extract host setup of disk device into helpers
Currently the code sets up only VDPA backends but will be used later in
hotplug code too.
This patch also uses normal forward iteration in the loop in
qemuProcessPrepareHostStorage as we don't need to remove disks from the
disk list at that point.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Thu, 26 Oct 2023 11:56:46 +0000 (13:56 +0200)]
docs: formatdomain: Clarify that the SLIC ACPI table config is available for all modes
Move the docs for the <acpi><table> element under a common section as
it's not specific for direct kernel boot. In fact the original use was
for Windows activation.
Fixes: 72f652da63255c7f1a9914625cce617dde9128d0 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 18 Oct 2023 14:55:13 +0000 (16:55 +0200)]
qemublocktest: testBackingXMLjsonXML: Drop 'legacy' mode
Legacy mode used to be needed for use with -drive, which was almost
completely deleted. We now have qemuxml2argvtest test cases checking a
few cases and the rest uses the modern mode only. Thus we don't need to
test the legacy mode any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 18 Oct 2023 14:55:41 +0000 (16:55 +0200)]
qemublocktest: Fix logical bug in TEST_JSON_FORMAT macro
Condition handling failure of the first virTestRun was lacking the 'ret
= -1' line thus the subsequent line was taken as it's body rendering the
first invocation useless.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Notable changes:
- new CPU topology parameters: 'books', 'drawers'
- new migration parameter 'avail-switchover-bandwidth'
- new s390x CPU properties: 'dedicated', 'entitlement'
- new 'hostmem' parameter for 'virtio-gpu'
- new device 'piix4-isa'
- new property 'dynamic-memslots' of 'virtio-mem' device
- new 'gsi*' parameters of 'ICH9-LPC'
- new experimental 'x-south-bridge' machine option
Given that this variable now controls not just whether C tests
are built, but also whether any test at all is executed, the new
name is more appropriate.
Update the description for the corresponding meson option
accordingly.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Currently, passing -Dtests=disabled only disables a subset of
tests: those that are written in C and thus require compilation.
Other tests, such as the syntax-check ones and those that are
implemented as scripts, are always enabled.
There's a potentially dangerous consequence of this behavior:
when tests are disabled, 'meson test' will succeed as if they
had been enabled. No indication of this will be shown, so the
user will likely make the reasonable assumption that everything
is fine when in fact the significantly reduced coverage might
be hiding failures.
To solve this issues, disable *all* tests when asked to do so,
and inject an intentionally failing test to ensure that 'meson
test' doesn't succeed.
Best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
It only makes sense to enable expensive tests when tests are
enabled. Disallow invalid configurations.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
There are some cases in which we automatically disable tests when
using Clang as the compiler. If the user has explicitly asked for
tests to be enabled, however, we should error out instead of
silently disabling things.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Note that we need to handle these somewhat late because of the
dependency on information about the compiler and the flags it
supports.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
As explained in the comment, the syntax-check machinery uses git
to figure out the list of files it should operate on, so we can
only enable it when building from git.
Despite only registering the various tests with meson in that
case, however, we unconditionally perform a bunch of preparation
that is only useful for the purpose of registering and running
the tests. If we're not going to do that, we can skip a few steps
and save a bit of time.
Best viewed with 'git show -w'.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Andrea Bolognani [Wed, 25 Oct 2023 15:33:49 +0000 (17:33 +0200)]
ci: Disable optimizations on macOS
Clang can be too aggressive at optimizations, which can end up
breaking our test suite. See f9f5ab57189b for details.
As a result of this, since 7944700b4037 we are automatically
disabling tests when Clang is used unless it supports the
-fsemantic-interposition compiler flag.
Since the version of Clang included in macOS doesn't support that
compiler flag, we end up always disabling the test suite on that
platform.
This is already far from ideal, considering that it was just last
year when we finally managed to get the test suite to successfully
pass on macOS, and it would be a real shame if the situation
regressed again.
With the upcoming changes, which will turn running 'meson test'
into a hard failure if tests are disabled, this behavior will
result in every single pipeline failing.
Work around the problem the only way we can: disabling
optimizations entirely for the macOS CI jobs.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Peter Krempa [Wed, 18 Oct 2023 14:18:40 +0000 (16:18 +0200)]
qemublocktest: Use "target only" mode in 'testJSONtoJSON' and 'testBackingXMLjsonXML'
Both tests pass a disk source definition which didn't go through the
preparation steps and thus contains only the target information that
were originally present, thus we should be using the
QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_TARGET_ONLY flag.
For the same reason QEMU_BLOCK_STORAGE_SOURCE_BACKEND_PROPS_AUTO_READONLY
used in 'testJSONtoJSON' doesn't make sense.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 18 Oct 2023 11:19:08 +0000 (13:19 +0200)]
qemuDomainDiskCachemodeFlags: Simplify usage
Return whether a relevant cachemode was presented rather than returning
an error, so that callers can be simplified. Use the proper enum type as
argument rather than typecasting in the switch statement.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 18 Oct 2023 10:56:04 +0000 (12:56 +0200)]
conf: Move definition of some disk type enums to a common header
Certain disk config fields are mirrored between the disk and storage
source definitions, but the proper types are not available for use in
the virStorageSource definition. Move them so they can be used properly.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 18 Oct 2023 07:38:56 +0000 (09:38 +0200)]
qemuBlockStorageSourceGetBackendProps: Remove unnecessary indent for non-nbdkit code path
Formatting of the 'nbdkit' driven backend breaks out of the switch
statement so we don't need to have an unnecessary block and indentation
level for the case when nbdkit is not in use.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 18 Oct 2023 07:34:27 +0000 (09:34 +0200)]
qemuBuildDriveSourceStr: Absorb only use of qemuDiskSourceGetProps
'qemuBuildDriveSourceStr' used to build the legacy -drive commandline
for SD cards is the only user of qemuDiskSourceGetProps. Move the helper
directly inline.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Andrea Bolognani [Fri, 29 Sep 2023 13:59:34 +0000 (15:59 +0200)]
systemd: Make service_extra_in/socket_extra_in required
We want at least one file to always be present, so that it can
serve as a pointer for users. Ensure that this is the case by
unconditionally using the value of the respective keys.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Andrea Bolognani [Fri, 29 Sep 2023 13:20:07 +0000 (15:20 +0200)]
systemd: Set service_extra_in/socket_extra_in everywhere
It's somewhat confusing that some of the services have a
corresponding foo.service.extra.in and foo.socket.extra.in, some
have just one of the two, and some have neither.
In order to make things more approachable, make sure that both
files exists for each service.
In most cases the extra units are currently unused, so they will
just contain a comment briefly explaining their purpose and
pointing users to meson.build, where they can find more
information. The same comment is also added to the top of
extra units that already have some contents in them for
consistency.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Andrea Bolognani [Fri, 29 Sep 2023 13:28:25 +0000 (15:28 +0200)]
systemd: Allow comments at the top of units
Currently the script will reject any type of contents outside
of a section, but we want to be able to have some useful
comments at the top of each file to help users understand how
they are processed.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Andrea Bolognani [Thu, 28 Sep 2023 09:39:23 +0000 (11:39 +0200)]
systemd: Support merging multiple units
In order to further deduplicate the contents of the various unit
files, we need to be able to merge multiple additional units
into the initial one.
Luckily the merge logic is in no way constrained to working with
just two units, so achieving this is pretty much just a matter
of lifting the existing limitation on the number of arguments
that the script accepts.
As a special case, it's now also possible to call the script
with just the base unit as argument. No merging will be performed
in that case, obviously, but we'll still go through the basic
validation and cleanup steps.
This also fixes a bug in the check for the number of arguments:
sys.argv also contains the name of the script, so we should have
checked that its size was at least 3. The check is now written in
a way that's less prone to misunderstandings.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Marc Hartmayer [Thu, 28 Sep 2023 15:37:10 +0000 (17:37 +0200)]
Improve `virsh create --console` behavior
When starting a guest via libvirt (`virsh create --console`), early
console output was missed because the guest was started first and then
the console was attached. This patch changes this to the following
sequence:
1. create a paused transient guest
2. attach the console
3. resume the guest
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Marc Hartmayer [Thu, 28 Sep 2023 15:37:09 +0000 (17:37 +0200)]
Improve `virsh start --console` behavior
When starting a guest via libvirt (`virsh start --console`), early
console output was missed because the guest was started first and then
the console was attached. This patch changes this to the following
sequence:
1. create a paused guest
2. attach the console
3. resume the guest
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Marc Hartmayer [Thu, 28 Sep 2023 15:37:08 +0000 (17:37 +0200)]
virsh: add `console --resume` support
This patch adds the command line flag `--resume` to the `virsh console`
command. This resumes a paused guest after connecting to the console.
This might be handy since it's a "common" pattern to start a guest
paused, connect to the console, and then resume it so as not to miss any
console messages.
Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Mon, 23 Oct 2023 02:34:52 +0000 (22:34 -0400)]
specfile: use correct option for nbdkit in mingw build
commit v9.8.0-40-g7cbd8c4230 changed the name of the option that
enables/disables nbdkit support in the build from "libnbd" to
"nbdkit", but one use of "libnbd=disabled" was missed in
libvirt.specfile.in - the meson commandline for mingw.
This patch changes that line to "-Dnbdkit=disabled", thus unbreaking
the rpm build.
Resolves: https://gitlab.com/libvirt/libvirt/-/issues/550 Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Starting with v28.0 cloud-hypervisor requires the use of "payload" api to pass
kernel, initramfs and cmdline options. Extend ch driver to use the new
api based on ch version.
Signed-off-by: Praveen K Paladugu <prapal@linux.microsoft.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
util:hostcpu: Report physical address size based on Architecture
The function virHostCPUGetPhysAddrSize was introduced with commit be1b7d5b18e
fails on architectures other than x86 and SuperH. The commit 8417c1394cd4d
fixed the issue only for s390 but the problem is still seen on other
architectures like ppc which does not report Physical address size in their
cpuinfo output.
vmDef->fss[i]->src->path may be NULL,
so check is needed before passing it to VIR_DEBUG.
Also removed checking vmDef->fss[i]->src for NULL, since it may not be NULL.
Fixes: 57487085dc ("lxc: don't try to reference NULL when mounting filesystems") Signed-off-by: Dmitry Frolov <frolov@swemel.ru> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Fima Shevrin [Thu, 19 Oct 2023 14:20:36 +0000 (17:20 +0300)]
qemu: Send event on persistent config modification
Currently, libvirt doesn't send events when devices are attached,
detached or updated. Thus, any services that listen to events are
unaware of the change to persistent config.
Signed-off-by: Fima Shevrin <efim.shevrin@virtuozzo.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Sergey Mironov [Wed, 11 Oct 2023 14:31:55 +0000 (17:31 +0300)]
selinux: Drop dead code in virSecuritySELinuxSetImageLabelInternal()
Considering that at the virSecuritySELinuxSetFilecon() function can only
return 0 or -1 and so does the virSecuritySELinuxFSetFilecon(), the check
for '1' at the end of virSecuritySELinuxSetImageLabelInternal() is
effectively a dead code. Drop it.
zhujun2 [Tue, 17 Oct 2023 06:43:50 +0000 (23:43 -0700)]
examples: Fix printf format string in event-test.c
Inside of myDomainEventMemoryFailureCallback() arguments are
printed via printf but '%d' is used to print @flags (of type
uint). Use '0x%x' instead, just like we do everywhere else.
Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Mon, 16 Oct 2023 14:20:27 +0000 (16:20 +0200)]
qemu: Use 'format' nodename accessors for block dirty bitmap operations
In most cases the bitmap operations are relevant only on qcow2 images
thus the 'format' layer will be present. Although in certain specific
cases temporary bitmaps can be created on top of other images as well,
thus we use the 'effective' bitmap name in all cases for bitmap
operations.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 16 Oct 2023 14:09:55 +0000 (16:09 +0200)]
qemu: Convert disk backend setup code to use 'format' nodename accessors
The disk backend setup code is concerned only about the effective
nodename. Doing this conversion will also simplify further changes
needed to drop the 'raw' layer in cases when it's not really needed.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 16 Oct 2023 13:41:12 +0000 (15:41 +0200)]
qemu: blockjob: Use 'format' nodename accessors for job naming
Use the effective nodename for naming the job as we use that one now.
It doesn't matter too much which one we pick, because it's used just for
the name of the job, which we preserve in the status XML.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 20 Sep 2023 13:24:14 +0000 (15:24 +0200)]
qemu: block: Add accessors for format layer node names
Introduce a set of accessors, which return node names based on
semantics. This will allow to us to modify how we setup the backing
chain in cases when e.g. the format driver can be omitted, without
breaking all the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 25 Sep 2023 14:44:26 +0000 (16:44 +0200)]
qemu: block: Convert disk 'storage' backend JSON props generator to new accessors
We need to use the 'effective' storage nodename (one which includes the
optional storage slice 'raw' intermediate layer) in the code which
formats the 'format' layer props.
All other cases need the real storage driver nodename as they either
generate the 'storage' layer props, or the storage slice, which refers
to the proper storage backend.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 25 Sep 2023 14:34:39 +0000 (16:34 +0200)]
qemu: domain: Convert the status XML code for 'storage' nodenames to new accessors
Use the new accessors in the private XML formatters and parsers and the
recovery code.
Specifically in all instances we use the proper (not effective) storage
nodename. In the virStorageSource private data it is what we need to
store. In blockjobs status XML it simply serves us to find the
appropriate 'virStorageSource' struct so using the storage layer node
name is simpler.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 21 Jun 2021 15:01:12 +0000 (17:01 +0200)]
qemu: block: Add accessors for protocol/storage node names
Introduce a set of accessors, which return node names based on
semantics. This will allow to us to modify how we setup the backing
chain in cases when e.g. the format driver can be omitted, without
breaking all the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Thu, 4 Mar 2021 15:12:20 +0000 (16:12 +0100)]
qemu: domain: Identify blockjobs by storage nodename in VM status XML
Use the node name of the storage access driver to identify the block job
volumes. This will prepare the blockjob code for the possibility that the
format layer may be missing. Our lookup code can find either of them,
thus we can safely switch.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Thu, 12 Oct 2023 14:03:41 +0000 (16:03 +0200)]
security: apparmor: Use translated disk definitions for disk type=volume
The 'virt-aa-helper' process gets a XML of the VM it needs to create a
profile for. For a disk type='volume' this XML contained only the
pool and volume name.
The 'virt-aa-helper' needs a local path though for anything it needs to
label. This means that we'd either need to invoke connection to the
storage driver and re-resolve the volume. Alternative which makes more
sense is to pass the proper data in the XML already passed to it via the
new XML formatter and parser flags.
This was indirectly reported upstream in
https://gitlab.com/libvirt/libvirt/-/issues/546
The configuration in the issue above was created by Cockpit on Debian.
Since Cockpit is getting more popular it's more likely that users will
be impacted by this problem.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Thu, 12 Oct 2023 14:08:01 +0000 (16:08 +0200)]
conf: Save translated disk definition for disk type='volume' to status XML
Re-translating the disk source pools when reconnecting to a VM makes no
sense as the volume might have changed or pool became inactive. The VM
still uses the original volume though. Failing to re-translate the pool
also causes the VM to be killed.
Fix this by storing the original translation in the status XML.
Resolves: https://issues.redhat.com/browse/RHEL-7345 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Thu, 12 Oct 2023 13:42:29 +0000 (15:42 +0200)]
qemu: domain: Allow preserving translated disk type='volume' data into XML if needed
Re-translating a disk type='volume' definition from a storage pool is
not a good idea in cases when the volume might have changed or we might
not have access to the storage driver.
Specific cases are if a storage pool is not activated on daemon restart,
then re-connecting to a VM fails, or if the virt-aa-helper program tries
to setup labelling for apparmor.
Add a new flag which will preserve the translated data in the
definition.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Mon, 16 Oct 2023 08:03:28 +0000 (10:03 +0200)]
virSecretLoad: Simplify cleanup path
When loading a secret value fails, the control jumps over to the
'cleanup' label where explicit call to virSecretDefFree()
happens. This is unnecessary as the corresponding variable can be
declared with g_autoptr() after which all error paths can just
return NULL instantly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Mon, 16 Oct 2023 07:49:02 +0000 (09:49 +0200)]
virSecretLoadAllConfigs: Use g_autofree for @path
When loading virSecret configs, the @path variable holds path to
individual config files. In each iteration it is freed explicitly
using VIR_FREE(). Switch it to g_autofree and remove those
explicit calls.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Mon, 16 Oct 2023 07:40:58 +0000 (09:40 +0200)]
lib: Replace virBuildPath() with g_build_filename()
Our virBuildPath() constructs a path from given arguments.
Exactly like g_build_filename(), except the latter is more
generic as it uses backslashes on Windows. Therefore, replace the
former with the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Fri, 13 Oct 2023 06:38:45 +0000 (08:38 +0200)]
virDomainMemoryDefValidate: Skip the same device on validation on memory device update
In my recent commit of v9.8.0-rc1~7 I've introduced validation
wrt other memory devices. And mostly works, except when doing
memory device update ('virsh update-memory-device') because then
@mem is just parsed <memory/> device XML and thus its pointer is
not in the vm->def->mem, yet. Thus my algorithm which skips over
the same entry fails. Fortunately, we require full device XML on
device update and thus we can use device address and aliases to
detect duplicity.
Fixes: 3fd64fb0e236fc80ffa2cc977c0d471f11fc39bf Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Sergey Mironov [Wed, 11 Oct 2023 08:19:08 +0000 (11:19 +0300)]
qemuMonitorJSONHandleTrayChange: Properly handle if 'devAlias' is missing
While qemu is still reporting the 'device' field in the tray even the
code was not ready for the possibility of it missing. Fix the condition
for clearing 'devAlias' if qemu doesn't report the 'device' field.
Erik Skultety [Wed, 27 Sep 2023 18:45:25 +0000 (20:45 +0200)]
docs: testtck: Expand the 'Run TCK' section on making use of ci/jobs.sh
Ever since commit 6e9bd600d7cf56b16620bf4c453427b01368360d added a new
GitLab job description function handling the integration test suite
process to ci/jobs.sh it should be mentioned in the docs.
This patch splits the 'Run TCK' section in two, giving user the option
to run the integration test suite in their VM environment the same way
as we do in GitLab CI or execute everything manually.
This patch takes the opportunity to also link to the virtiofs kbase
article to give users a different option to get the local libvirt
repositories to be used in testing inside a VM.
Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Erik Skultety [Wed, 27 Sep 2023 18:41:05 +0000 (20:41 +0200)]
docs: testtck: Add a clear note on libvirt + Perl bindings dependency
It's mentioned in an earlier paragraph that Perl bindings in correct
version are needed, but there's no note about libvirt even though it
should be obvious. So make a clear note on that and while at it, do
mention the possibility to get upstream libvirt RPMs from GitLab CI
artifacts if users don't feel like building everything on their own.
Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
projects / libvirt.git / log