Peter Maydell [Wed, 2 Sep 2020 20:20:20 +0000 (21:20 +0100)]
Merge remote-tracking branch 'remotes/nvme/tags/pull-nvme-20200902' into staging
qemu-nvme
# gpg: Signature made Wed 02 Sep 2020 15:39:10 BST
# gpg: using RSA key DBC11D2D373B4A3755F502EC625156610A4F6CC0
# gpg: Good signature from "Keith Busch <kbusch@kernel.org>" [unknown]
# gpg: aka "Keith Busch <keith.busch@gmail.com>" [unknown]
# gpg: aka "Keith Busch <keith.busch@intel.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: DBC1 1D2D 373B 4A37 55F5 02EC 6251 5661 0A4F 6CC0
* remotes/nvme/tags/pull-nvme-20200902: (39 commits)
hw/block/nvme: remove explicit qsg/iov parameters
hw/block/nvme: use preallocated qsg/iov in nvme_dma_prp
hw/block/nvme: consolidate qsg/iov clearing
hw/block/nvme: add ns/cmd references in NvmeRequest
hw/block/nvme: be consistent about zeros vs zeroes
hw/block/nvme: add check for mdts
hw/block/nvme: refactor request bounds checking
hw/block/nvme: verify validity of prp lists in the cmb
hw/block/nvme: add request mapping helper
hw/block/nvme: add tracing to nvme_map_prp
hw/block/nvme: refactor dma read/write
hw/block/nvme: destroy request iov before reuse
hw/block/nvme: remove redundant has_sg member
hw/block/nvme: replace dma_acct with blk_acct equivalent
hw/block/nvme: add mapping helpers
hw/block/nvme: memset preallocated requests structures
hw/block/nvme: bump supported version to v1.3
hw/block/nvme: provide the mandatory subnqn field
hw/block/nvme: enforce valid queue creation sequence
hw/block/nvme: reject invalid nsid values in active namespace id list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QOM Cleanups:
* Fix typo in AARCH64_CPU_GET_CLASS
* Rename QOM macros for consistency and/or to avoid
conflicts with other symbols
* Move typedefs to header files
* Correct instance/class sizes
* remotes/rth/tags/pull-mb-20200901: (76 commits)
target/microblaze: Reduce linux-user address space to 32-bit
target/microblaze: Add flags markup to some helpers
target/microblaze: Remove cpu_R[0]
target/microblaze: Remove last of old decoder
target/microblaze: Convert dec_stream to decodetree
target/microblaze: Convert dec_msr to decodetree
target/microblaze: Convert msrclr, msrset to decodetree
target/microblaze: Tidy do_rti, do_rtb, do_rte
target/microblaze: Convert dec_rts to decodetree
target/microblaze: Convert dec_bcc to decodetree
target/microblaze: Convert dec_br to decodetree
target/microblaze: Reorganize branching
target/microblaze: Convert mbar to decodetree
target/microblaze: Convert brk and brki to decodetree
target/microblaze: Tidy mb_cpu_dump_state
target/microblaze: Replace delayed_branch with tb_flags_to_set
target/microblaze: Replace clear_imm with tb_flags_to_set
target/microblaze: Use cc->do_unaligned_access
tcg: Add tcg_get_insn_start_param
target/microblaze: Store "current" iflags in insn_start
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cornelia Huck [Mon, 24 Aug 2020 12:20:51 +0000 (14:20 +0200)]
virtio: add Virtio*BusClass sizes
Both VirtioPCIBusClass and VirtioCcwBusClass are typedefs of
VirtioBusClass, but set .class_size in the TypeInfo anyway
to be safe if that changes in the future.
Eduardo Habkost [Wed, 26 Aug 2020 17:10:05 +0000 (13:10 -0400)]
tls-cipher-suites: Correct instance_size
We do have a QCryptoTLSCipherSuites struct. It must be used when
setting instance_size of the QOM type. Luckily this never caused
problems because the QCryptoTLSCipherSuites struct has only a
parent_obj field and nothing else.
Eduardo Habkost [Tue, 25 Aug 2020 19:20:48 +0000 (15:20 -0400)]
rx: Rename QOM type check macros
Currently we have a RXCPU typedef and a RXCPU type checking
macro, but OBJECT_DECLARE* would transform the RXCPU macro into a
function, and the function name would conflict with the typedef
name.
Rename the RXCPU* QOM type check macros to RX_CPU*, so we will
avoid the conflict and make the macro names consistent with the
TYPE_RX_CPU constant name.
This will make future conversion to OBJECT_DECLARE* easier.
Eduardo Habkost [Tue, 25 Aug 2020 19:20:42 +0000 (15:20 -0400)]
x86-iommu: Rename QOM type macros
Some QOM macros were using a X86_IOMMU_DEVICE prefix, and others
were using a X86_IOMMU prefix. Rename all of them to use the
same X86_IOMMU_DEVICE prefix.
This will make future conversion to OBJECT_DECLARE* easier.
Klaus Jensen [Wed, 29 Jul 2020 19:55:37 +0000 (21:55 +0200)]
hw/block/nvme: remove explicit qsg/iov parameters
Since nvme_map_prp always operate on the request-scoped qsg/iovs, just
pass a single pointer to the NvmeRequest instead of two for each of the
qsg and iov.
Suggested-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Klaus Jensen [Sun, 23 Feb 2020 15:12:12 +0000 (16:12 +0100)]
hw/block/nvme: verify validity of prp lists in the cmb
Before this patch the device already supported PRP lists in the CMB, but
it did not check for the validity of it nor announced the support in the
Identify Controller data structure LISTS field.
If some of the PRPs in a PRP list are in the CMB, then ALL entries must
be there. This patch makes sure that requirement is verified as well as
properly announcing support for PRP lists in the CMB.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Klaus Jensen [Mon, 30 Mar 2020 20:22:38 +0000 (22:22 +0200)]
hw/block/nvme: replace dma_acct with blk_acct equivalent
The QSG isn't always initialized, so accounting could be wrong. Issue a
call to blk_acct_start instead with the size taken from the QSG or IOV
depending on the kind of I/O.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Klaus Jensen [Sun, 23 Feb 2020 13:21:52 +0000 (14:21 +0100)]
hw/block/nvme: add mapping helpers
Add nvme_map_addr, nvme_map_addr_cmb and nvme_addr_to_cmb helpers and
use them in nvme_map_prp.
This fixes a bug where in the case of a CMB transfer, the device would
map to the buffer with a wrong length.
Fixes: b2b2b67a00574 ("nvme: Add support for Read Data and Write Data in CMBs.") Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Reviewed-by: Andrzej Jakowski <andrzej.jakowski@linux.intel.com>
This is preparatory to subsequent patches that change how QSGs/IOVs are
handled. It is important that the qsg and iov members of the NvmeRequest
are initially zeroed.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Klaus Jensen [Mon, 6 Jul 2020 06:12:59 +0000 (08:12 +0200)]
hw/block/nvme: support identify namespace descriptor list
Since we are not providing the NGUID or EUI64 fields, we must support
the Namespace UUID. We do not have any way of storing a persistent
unique identifier, so conjure up a UUID that is just the namespace id.
Klaus Jensen [Mon, 6 Jul 2020 06:12:57 +0000 (08:12 +0200)]
hw/block/nvme: support the get/set features select and save fields
Since the device does not have any persistent state storage, no
features are "saveable" and setting the Save (SV) field in any Set
Features command will result in a Feature Identifier Not Saveable status
code.
Similarly, if the Select (SEL) field is set to request saved values, the
devices will (as it should) return the default values instead.
Since this also introduces "Supported Capabilities", the nsid field is
now also checked for validity wrt. the feature being get/set'ed.
Klaus Jensen [Mon, 6 Jul 2020 06:12:54 +0000 (08:12 +0200)]
hw/block/nvme: move NvmeFeatureVal into hw/block/nvme.h
The NvmeFeatureVal does not belong with the spec-related data structures
in include/block/nvme.h that is shared between the block-level nvme
driver and the emulated nvme device.
Move it into the nvme device specific header file as it is the only
user of the structure. Also, remove the unused members.
Klaus Jensen [Mon, 6 Jul 2020 06:12:53 +0000 (08:12 +0200)]
hw/block/nvme: add support for the asynchronous event request command
Add support for the Asynchronous Event Request command. Required for
compliance with NVMe revision 1.3d. See NVM Express 1.3d, Section 5.2
("Asynchronous Event Request command").
Mostly imported from Keith's qemu-nvme tree. Modified with a max number
of queued events (controllable with the aer_max_queued device
parameter). The spec states that the controller *should* retain
events, so we do best effort here.
Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20200706061303.246057-9-its@irrelevant.dk>
Klaus Jensen [Mon, 6 Jul 2020 06:12:52 +0000 (08:12 +0200)]
hw/block/nvme: add support for the get log page command
Add support for the Get Log Page command and basic implementations of
the mandatory Error Information, SMART / Health Information and Firmware
Slot Information log pages.
In violation of the specification, the SMART / Health Information log
page does not persist information over the lifetime of the controller
because the device has no place to store such persistent state.
Note that the LPA field in the Identify Controller data structure
intentionally has bit 0 cleared because there is no namespace specific
information in the SMART / Health information log page.
Required for compliance with NVMe revision 1.3d. See NVM Express 1.3d,
Section 5.14 ("Get Log Page command").
Signed-off-by: Klaus Jensen <klaus.jensen@cnexlabs.com> Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200706061303.246057-8-its@irrelevant.dk>
Klaus Jensen [Mon, 6 Jul 2020 06:12:50 +0000 (08:12 +0200)]
hw/block/nvme: add temperature threshold feature
It might seem weird to implement this feature for an emulated device,
but it is mandatory to support and the feature is useful for testing
asynchronous event request support, which will be added in a later
patch.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com> Acked-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20200706061303.246057-6-its@irrelevant.dk>
Klaus Jensen [Mon, 6 Jul 2020 06:12:48 +0000 (08:12 +0200)]
hw/block/nvme: additional tracing
Add various additional tracing and streamline nvme_identify_ns and
nvme_identify_nslist (they do not need to repeat the command, it is
already in the trace name).
The Persistent Memory Region Controller Memory Space Control
register is 64-bit wide. See 'Figure 68: Register Definition'
of the 'NVM Express Base Specification Revision 1.4'.
hw/block/nvme: Use QEMU_PACKED on hardware/packet structures
These structures either describe hardware registers, or
commands ('packets') to send to the hardware. To forbid
the compiler to optimize and change fields alignment,
mark the structures as packed.
Keith Busch [Mon, 6 Jul 2020 18:29:22 +0000 (11:29 -0700)]
MAINTAINERS: update nvme entry
The nvme emulated device development pace has increased recently. Klaus
has offered to co-maintain, and since we have many new contributions
coming through, we're adding a repository to accumulate and test new
features.
Greg Kurz [Tue, 1 Sep 2020 14:20:16 +0000 (16:20 +0200)]
Makefile: Fix in-tree clean/distclean
Doing 'make clean' or 'make distclean' in a freshly cloned tree results in:
make: *** No rule to make target 'ninja-clean', needed by 'clean'. Stop.
Make the fallback rules global. While here, change the ninjatool recipe to
always have a zero exit status and thus prevent make to emit a warning.
Fixes: a56650518f5b ("configure: integrate Meson in the build system") Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159897001659.442705.15538955005543395950.stgit@bahia.lan> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Greg Kurz [Tue, 1 Sep 2020 14:20:10 +0000 (16:20 +0200)]
Makefile: Add back TAGS/ctags/cscope rules
It is a bit of a pain to be forced to run configure before being able
to use cscope and friends. Add back the rules to build them in-tree
as before commit a56650518f5b.
Fixes: a56650518f5b ("configure: integrate Meson in the build system") Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159897001005.442705.16516671603870288336.stgit@bahia.lan> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Tue, 1 Sep 2020 15:51:37 +0000 (16:51 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200901' into staging
target-arm queue:
* Implement fp16 support for AArch32 VFP and Neon
* hw/arm/sbsa-ref: add "reg" property to DT cpu nodes
* hw/arm/sbsa-ref : Add embedded controller in secure memory
target/microblaze: Reduce linux-user address space to 32-bit
User-space programs cannot use the 64-bit lwea/swea instructions.
We can improve code generation and runtime by restricting the
user-only address space to 32-bit.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Add flags markup to some helpers
The mmu_read, mmu_write, get, and put helpers do not touch the
general registers, or any of the other variables managed by tcg.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not initialize cpu_R[0], as this should be totally unused.
The cpu_for_read and cpu_for_write functions use a local temp.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All instructions have been convered. Issue sigill if decodetree
does not match. Remove argument decode from DisasContext.
Remove microblaze-decode.h.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Convert dec_stream to decodetree
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Convert msrclr, msrset to decodetree
Split this out of dec_msr.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since cpu_msr is no longer a 64-bit quantity, we can simplify
the arithmetic in these functions.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove the btaken variable, and simplify things by always computing
the full branch destination into btarget. This avoids all need for
sync_jmpstate().
Retain the direct branch behaviour by remembering the jump destination
in jmp_dest, discarding btarget. In the normal case, where the branch
delay slot cannot trap (e.g. arithmetic), tcg will remove the computation
into btarget, leaving us with just the tcg direct branching at the end.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split this out of the normal branch instructions,
as it requires special handling.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Convert brk and brki to decodetree
Split these out of the normal branch instructions, as they require
special handling. Perform the entire operation inline, instead of
raising EXCP_BREAK to do the work in mb_cpu_do_interrupt.
This fixes a bug in that brki rd, imm, for imm != 0x18 is not
supposed to set MSR_BIP. This fixes a bug in that imm == 0 is
the reset vector and 0x18 is the debug vector, and neither should
raise a tcg exception in system mode.
Introduce EXCP_SYSCALL for microblaze-linux-user.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Using lookup_symbol is quite slow; remove that. Decode the
various bits of iflags; only show imm, btaken, btarget when
they are relevant to iflags. Improve formatting.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Replace delayed_branch with tb_flags_to_set
The multi-stage counter can be replaced by clearing D_FLAG,
the or'ing in tb_flags_to_set. The jump then happens when
D_FLAG is finally cleared.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Replace clear_imm with tb_flags_to_set
This more general update variable will be able to handle
delay slots as well.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This fixes the problem in which unaligned stores succeeded,
but then we raised the exception after modifying memory.
Store the ESS for the unaligned data access in the iflags
for the insn, so that it can be found during unwind.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
MicroBlaze will shortly need to update a parameter in place.
Add an interface to read to match that for write.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Store "current" iflags in insn_start
This data is available during exception unwinding, thus
we can restore it from there directly, rather than saving
it during the TB. Thus we may remove the t_sync_flags()
calls in the load/store operations.
Note that these calls were missing from the other places
where runtime exceptions may be raised, such as idiv and
the floating point operations.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not call cpu_restore_state when no exception will be
delivered. This can lead to inconsistent cpu state.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reported-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
It makes sense to keep BIMM with D_FLAG, as they can be written
back to iflags at the same time. BIMM_FLAG does not need to be
added to IFLAGS_TB_MASK because it does not affect the next TB,
only the exception path out of the current TB. Renumber IMM_FLAG,
as the value 4 holds no particular significance; pack these two
flags at the bottom of the bitfield.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Assert no overlap in flags making up tb_flags
Create MSR_TB_MASK. Use it in cpu_get_tb_cpu_state, and check
that IFLAGS_TB_MASK does not overlap.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Convert dec_load and dec_store to decodetree
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Restore the correct PC when an exception must be raised.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Cache mem_index in DisasContext
Ideally, nothing outside the top-level of translation even
has access to env. Cache the value in init_disas_context.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Replace MSR_EE_FLAG with MSR_EE
There's no reason to define MSR_EE_FLAG; we can just use the
original MSR_EE define. Document the other flags copied into
tb_flags with iflag to reserve those bits.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Mark fpu helpers TCG_CALL_NO_WG
Now that FSR is no longer a tcg global temp, we can say that
the fpu helpers do not write to tcg temps. All temps are
read implicitly by the fpu exception path.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Fix cpu unwind for fpu exceptions
Restore the correct PC when an exception must be raised.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The current dec_check_fpuv2 test, raising an FPU exception for
an unimplemented instruction, appears to be contradictory to
the manual. Drop that and merely check use_fpu == 2.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Convert dec_barrel to decodetree
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/microblaze: Unwind properly when raising divide-by-zero
Restore the correct pc when raising divide-by-zero. Also, the
MSR[DZO] bit is sticky -- it is not cleared with a successful divide.
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
projects / qemu-xen.git / log