Eric Blake [Thu, 7 Jul 2011 18:04:41 +0000 (12:04 -0600)]
node_device: avoid implicit int
'unsigned a' and 'unsigned int a' are synonyms, but we generally
always spell out the 'int' in that case. Fixing this will avoid
a false positive in the next syntax-check commit.
* src/conf/node_device_conf.h (pci_config_address)
(_virNodeDevCapsDef): Prefer 'unsigned int' over 'unsigned'.
Eric Blake [Wed, 6 Jul 2011 23:09:40 +0000 (17:09 -0600)]
xenapi: reject unknown flags
* src/xenapi/xenapi_driver.c (xenapiOpen, xenapiDomainReboot):
Reject unknown flags.
(xenapiDomainGetXMLDesc): Likewise, and pass known flags through
to XML generation.
Eric Blake [Wed, 6 Jul 2011 22:33:53 +0000 (16:33 -0600)]
lxc: reject unknown flags
* src/lxc/lxc_driver.c (lxcOpen, lxcDomainSetMemoryParameters)
(lxcDomainGetMemoryParameters): Reject unknown flags.
* src/lxc/lxc_container.c (lxcContainerStart): Rename flags to
cflags to reflect that it is not tied to libvirt.
Eric Blake [Fri, 8 Jul 2011 15:18:48 +0000 (09:18 -0600)]
maint: print flags in hex during debug
Continuation of commit 313ac7fd, and enforce things with a syntax
check.
Technically, virNetServerClientCalculateHandleMode is not printing
a mode_t, but rather a collection of VIR_EVENT_HANDLE_* bits;
however, these bits are < 8, so there is no different in the
output, and that was the easiest way to silence the new syntax check.
Eric Blake [Tue, 12 Jul 2011 22:47:01 +0000 (16:47 -0600)]
util: honor anchored names when searching for executables
I got bit in a debugging session on an uninstalled libvirtd; the
code tried to call out to the installed $LIBEXECDIR/libvirt_iohelper
instead of my just-built version. So I set a breakpoint and altered
the binary name to be "./src/libvirt_iohelper", and it still failed
because I don't have "." on my PATH.
According to POSIX, execvp only searches PATH if the name does
not contain a slash. Since we are trying to mimic that behavior,
an anchored name should be relative to the current working dir.
This tightens existing behavior, but most callers already pass
an absolute name or a name with no slashes, so it probably won't
be noticeable.
* src/util/util.c (virFindFileInPath): Anchored relative names do
not invoke a PATH search.
Ensure signal handler propagates fatal signals to default handler
When replacing the default SEGV/ABORT/BUS signal handlers you
can't rely on the process being terminated after your custom
handler runs. It is neccessary to manually restore the default
handler and then re-raise the signal
* src/rpc/virnetserver.c: Restore default handler and raise
signal
When monitor is entered with qemuDomainObjEnterMonitorWithDriver, the
correct method for leaving and unlocking the monitor is
qemuDomainObjExitMonitorWithDriver.
Most of the code in these two functions is supposed to be identical but
currently it isn't (which is natural since the code is duplicated).
Let's move common parts of these functions into qemuMigrationPrepareAny.
This also fixes qemuMigrationPrepareTunnel which didn't store received
lockState in the domain object.
Jiri Denemark [Mon, 6 Jun 2011 08:30:54 +0000 (10:30 +0200)]
qemu: Add support for job phase
Asynchronous jobs may take long time to finish and may consist of
several phases which we need to now about to help with recovery/rollback
after libvirtd restarts.
Jiri Denemark [Thu, 30 Jun 2011 09:23:50 +0000 (11:23 +0200)]
qemu: Allow all query commands to be run during long jobs
Query commands are safe to be called during long running jobs (such as
migration). This patch makes them all work without the need to
special-case every single one of them.
The patch introduces new job.asyncCond condition and associated
job.asyncJob which are dedicated to asynchronous (from qemu monitor
point of view) jobs that can take arbitrarily long time to finish while
qemu monitor is still usable for other commands.
The existing job.active (and job.cond condition) is used all other
synchronous jobs (including the commands run during async job).
Locking schema is changed to use these two conditions. While asyncJob is
active, only allowed set of synchronous jobs is allowed (the set can be
different according to a particular asyncJob) so any method that
communicates to qemu monitor needs to check if it is allowed to be
executed during current asyncJob (if any). Once the check passes, the
method needs to normally acquire job.cond to ensure no other command is
running. Since domain object lock is released during that time, asyncJob
could have been started in the meantime so the method needs to recheck
the first condition. Then, normal jobs set job.active and asynchronous
jobs set job.asyncJob and optionally change the list of allowed job
groups.
Since asynchronous jobs only set job.asyncJob, other allowed commands
can still be run when domain object is unlocked (when communicating to
remote libvirtd or sleeping). To protect its own internal synchronous
commands, the asynchronous job needs to start a special nested job
before entering qemu monitor. The nested job doesn't check asyncJob, it
only acquires job.cond and sets job.active to block other jobs.
EnterMonitor and ExitMonitor methods are very similar to their
*WithDriver variants; consolidate them into EnterMonitorInternal and
ExitMonitorInternal to avoid (mainly future) code duplication.
Incrementally running 'make syntax-check' on a tree previously
built after commit 62dee6f but before 44036460 fails sc_po_check
(because the generated qemu_dispatch.h gained translatable strings).
This is a followup to commit addaa537 for that scenario.
* cfg.mk (sc_po_check): Add another prereq.
($(srcdir)/daemon/qemu_dispatch.h): Add rule.
Since a host can run several different virtualization types at
the same time, audit messages should allow domains to be identified.
Add a 'virt={qemu,kvm,uml,lxc,...}' key to domain audit messages
* src/conf/domain_audit.c: Identify virt type of guest
Implement code to attach to external QEMU instances.
Given a PID, the QEMU driver reads /proc/$PID/cmdline and
/proc/$PID/environ to get the configuration. This is fed
into the ARGV->XML convertor to build an XML configuration
for the process.
/proc/$PID/exe is resolved to identify the full command
binary path
After checking for name/uuid uniqueness, an attempt is
made to connect to the monitor socket. If successful
then 'info status' and 'info kvm' are issued to determine
whether the CPUs are running and if KVM is enabled.
* src/qemu/qemu_driver.c: Implement virDomainQemuAttach
* src/qemu/qemu_process.h, src/qemu/qemu_process.c: Add
qemuProcessAttach to connect to the monitor of an
existing QEMU process
Add monitor API for checking whether KVM is enabled
When attaching to an external QEMU process, it is neccessary
to check if the process is using KVM or not. This can be done
using a monitor command
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.c, src/qemu/qemu_monitor_json.h,
src/qemu/qemu_monitor_text.c, src/qemu/qemu_monitor_text.h: Add
API for checking if KVM is enabled
Define remote wire protocol & impls for virDomainQemuAttach
This tweaks the RPC generator to cope with some naming
conventions used for the QEMU specific APIs
* daemon/remote.c: Server side dispatcher
* src/remote/remote_driver.c: Client side dispatcher
* src/remote/qemu_protocol.x: Wire protocol definition
* src/rpc/gendispatch.pl: Use '$structprefix' in method
names, fix QEMU flags and fix dispatcher method names
Define a QEMU specific API to attach to a running QEMU process
Introduce a new API in libvirt-qemu.so
virDomainPtr virDomainQemuAttach(virConnectPtr domain,
unsigned long long pid,
unsigned int flags);
This allows libvirtd to attach to an existing, externally
launched QEMU process. This is useful for QEMU developers who
prefer to launch QEMU themselves for debugging/devel reasons,
but still want the benefit of libvirt based tools like
virt-top, virt-viewer, etc
Set StrictHostKeyChecking=no to auto-accept new ssh host keys if the
no_verify extra parameter was specified. This won't disable host key
checking for already known hosts. Includes a test and documentation.
Eric Blake [Fri, 8 Jul 2011 16:54:02 +0000 (10:54 -0600)]
build: also check qemu_protocol for on-the-wire stability
Since we are going to add some libvirt-qemu.so entry points in
0.9.4, we might as well start checking for RPC stability, just
as for libvirt.so.
* src/Makefile.am (PROTOCOL_STRUCTS): New variable.
(remote_protocol-structs): Rename...
(%_protocol-structs): ...and make more generic.
* src/qemu_protocol-structs: New file.
Eric Blake [Mon, 11 Jul 2011 23:22:20 +0000 (17:22 -0600)]
build: avoid requiring -lm
log2() is heavy when ffs() can do the same thing. But ffs()
requires gnulib support for mingw.
This patch solves this linker error on Fedora 14.
/usr/bin/ld: libvirt_lxc-domain_conf.o: undefined reference to symbol 'log2@@GLIBC_2.2.5'
/usr/bin/ld: note: 'log2@@GLIBC_2.2.5' is defined in DSO /lib64/libm.so.6 so try adding it to the linker command line
/lib64/libm.so.6: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
* .gnulib: Update to latest, for ffs.
* bootstrap.conf (gnulib_modules): Import ffs.
* src/conf/domain_conf.c (virDomainDefParseXML): Use ffs instead
of log2.
Reported by Dave Allan.
The drivers were accepting domain configs without checking if those
were actually meant for them. For example the LXC driver happily
accepts configs with type QEMU.
Add a check for the expected domain types to the virDomainDefParse*
functions.
Alex Jia [Mon, 11 Jul 2011 05:14:45 +0000 (13:14 +0800)]
remote: Fix memory leak
Detected in valgrind run:
==9184== 1 bytes in 1 blocks are definitely lost in loss record 1 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF97C9: xdr_remote_domain_get_security_label_ret (remote_protocol.c:1696)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF71C6: remoteDomainGetSecurityLabel (remote_driver.c:1580)
==9184== by 0x4CCA480: virDomainGetSecurityLabel (libvirt.c:7340)
==9184== by 0x41993A: cmdDominfo (virsh.c:2414)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 2 bytes in 1 blocks are definitely lost in loss record 2 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF974F: xdr_remote_node_get_security_model_ret (remote_protocol.c:1713)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184== by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184== by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== 8 bytes in 1 blocks are definitely lost in loss record 3 of 19
==9184== at 0x4A04A28: calloc (vg_replace_malloc.c:467)
==9184== by 0x3073715F78: xdr_array (xdr_array.c:97)
==9184== by 0x4CF9729: xdr_remote_node_get_security_model_ret (remote_protocol.c:1710)
==9184== by 0x4D08741: virNetMessageDecodePayload (virnetmessage.c:286)
==9184== by 0x4D00F78: virNetClientProgramCall (virnetclientprogram.c:318)
==9184== by 0x4CE3887: call (remote_driver.c:3933)
==9184== by 0x4CF6F96: remoteNodeGetSecurityModel (remote_driver.c:1648)
==9184== by 0x4CBF799: virNodeGetSecurityModel (libvirt.c:7382)
==9184== by 0x4197D7: cmdDominfo (virsh.c:2394)
==9184== by 0x411E92: vshCommandRun (virsh.c:12730)
==9184== by 0x4211ED: main (virsh.c:14076)
==9184==
==9184== LEAK SUMMARY:
==9184== definitely lost: 11 bytes in 3 blocks
* src/remote/remote_driver.c: Avoid leak on remoteDomainGetSecurityLabel
and remoteNodeGetSecurityModel.
Eric Blake [Mon, 11 Jul 2011 15:19:11 +0000 (09:19 -0600)]
tests: simplify formatting
The shell version would output 40 extra spaces for a test with
a multiple of 40 sub-tests, and the C version can use the same
printf optimization for avoiding a loop over single space output
as the shell version.
* tests/testutils.c (virtTestMain): Avoid loop for alignment.
* tests/test-lib.sh: Fix formatting when counter is multiple of 40.
Jim Fehlig [Thu, 7 Jul 2011 01:17:16 +0000 (19:17 -0600)]
Do not drop kernel cmdline for xen pv domains
Kernel cmdline args can be passed to xen pv domains even when a
bootloader is specified. The current config-to-sxpr mapping
ignores cmdline when bootloader is present.
Since the xend sub-driver is used with many xen toolstack versions,
this patch takes conservative approach of adding an else block to
existing !def->os.bootloader, and only appends sxpr if def->os.cmdline
is non-NULL.
V2: Fix existing testcase broken by this patch and add new testcases
If virDomainSaveConfig() failed, we will return NULL to source,
and the vm is still available to restart during confirm() step in
v3 protocol. So we should kill it off in qemuMigrationFinish().
In v2 protocol, we should not set vm to NULL, because we hold
a reference of vm and should unrefernce it.
This patch creates new <bios> element which, at this time has only the
attribute useserial='yes|no'. This attribute allow users to use
Serial Graphics Adapter and see BIOS messages from the very first moment
domain boots up. Therefore, users can choose boot medium, set PXE, etc.
tests: Improve output of tests that decide to skip at runtime
Don't print OK/FAIL for tests that decide to be skipped after
calling virtTestMain. Delay printing of the indentation before
the first test until we know that the test didn't decide to be
skipped.
The current logic tries to count from 1 to 40 and ignores paddings
of 0 and 1 to 40. This doesn't work for counter + 1 mod 40 == 0
like here for counter value 159
It is common for the $HOME/.libvirt/libvirtd.conf file to not
exist. Treat this situation as non-fatal since we can carry
on with our default settings just fine.
* daemon/libvirtd.c: Treat ENOENT as non-fatal when loading
config
The dispatch for the CLOSE RPC call was invoking the method
virNetServerClientClose(). This caused the client connection
to be immediately terminated. This meant the reply to the
final RPC message was never sent. Prior to the RPC rewrite
we merely flagged the connection for closing, and actually
closed it when the next RPC call dispatch had completed.
* daemon/remote.c: Flag connection for a delayed close
* daemon/stream.c: Update to use new API for closing
failed connection
* src/rpc/virnetserverclient.c, src/rpc/virnetserverclient.h:
Add support for a delayed connection close. Rename the
virNetServerClientMarkClose method to virNetServerClientImmediateClose
to clarify its semantics
Fix leak of remote driver if final 'CLOSE' RPC call fails
When closing a remote connection we issue a (fairly pointless)
'CLOSE' RPC call to the daemon. If this fails we skip all the
cleanup of private data, but the virConnectPtr object still
gets released as normal. This causes a memory leak. Since the
CLOSE RPC call is pretty pointless, just carry on freeing the
remote driver if it fails.
* src/remote/remote_driver.c: Ignore failure to issue CLOSE
RPC call
Fix release of outgoing stream confirmation/abort message
When sending back the final OK or ERROR message on completion
of a stream, we were not decrementing the 'nrequests' tracker
on the client. With the default requests limit of '5', this
meant once a client had created 5 streams, they are unable to
process any further RPC calls. There was also a bug when
handling an error from decoding a message length header, which
meant a client connection would not immediately be closed.
* src/rpc/virnetserverclient.c: Fix release of request after
stream completion & mark client for close on error
In one exit path we forgot to free the virNetMessage object causing
a large memory leak for streams which send a lot of data. Some other
paths were calling VIR_FREE directly instead of virNetMessageFree
although this was (currently) harmless.
* src/rpc/virnetclientstream.c: Fix leak of msg object
* src/rpc/virnetclientprogram.c: Call virNetMessageFree instead
of VIR_FREE
Fix potential crash in libvirtd with active streams
If a client disconnects while it has a stream active, there is
a race condition which could see libvirtd crash. This is because
the client struct may be freed before the last stream event has
triggered. This is trivially solved by holding an extra reference
on the client for the stream callbak
* daemon/stream.c: Acquire reference on client when adding the
stream callback
Fix mistaken order of server cert/key parameters in constructor
The virNetTLSContextNew was being passed key/cert parameters in
the wrong order. This wasn't immediately visible because if
virNetTLSContextNewPath was used, a second bug reversed the order
of those parameters again.
Only if the paths were manually specified in /etc/libvirt/libvirtd.conf
did the bug appear
* src/rpc/virnettlscontext.c: Fix order of params passed to
virNetTLSContextNew
Michal Privoznik [Thu, 26 May 2011 14:15:54 +0000 (16:15 +0200)]
graphics: add support for action_if_connected in qemu
This option accepts 3 values:
-keep, to keep current client connected (Spice+VNC)
-disconnect, to disconnect client (Spice)
-fail, to fail setting password if there is a client connected (Spice)
util: Don't try to fchown files opened as non-root
When virFileOpenAs is called with VIR_FILE_OPEN_AS_UID flag and uid/gid
different from root/root while libvirtd is running as root, we fork a
new child, change its effective UID/GID to uid/gid and run
virFileOpenAsNoFork. It doesn't make any sense to fchown() the opened
file in this case since we already know that uid/gid can access the file
when open succeeds and one of the following situations may happen:
- the file is already owned by uid/gid and we skip fchown even before
this patch
- the file is owned by uid but not gid because it was created in a
directory with SETGID set, in which case it is desirable not to change
the group
- the file may be owned by a completely different user and/or group
because it was created on a root-squashed or even all-squashed NFS
filesystem, in which case fchown would most likely fail anyway
Jim Fehlig [Thu, 7 Jul 2011 21:53:41 +0000 (15:53 -0600)]
Skip some xen tests if xend is not running
Currently, the xen statstest and reconnect tests are only compiled
if xend is running. Compile them unconditionally if xen headers
are present, but skip the tests at runtime if xend is not running.
Eric Blake [Wed, 6 Jul 2011 19:55:47 +0000 (13:55 -0600)]
public API: prefer unsigned int for flags
Most APIs use 'unsigned int flags'; but a few stragglers were using
a signed value. In particular, the vir*GetXMLDesc APIs were
split-brain, with inconsistent choice of types. Although it is
an API break to use 'int' instead of 'unsigned int', it is ABI
compatible (pre-compiled apps will have no difference in behavior),
and generally apps can be recompiled without any issue (only rare
apps that compiled with extremely high warning levels, or which
pass libvirt API around as typed function pointers, would have to
make any code changes to deal with the change).
The migrate APIs use 'unsigned long flags', which can't be changed,
due to ABI constraints.
This patch intentionally touches only the public API, to prove the
claim that most existing code (including driver callbacks and virsh)
still compiles just fine in spite of the type change.
* include/libvirt/libvirt.h.in (virConnectOpenAuth)
(virDomainCoreDump, virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc): Use unsigned int for flags.
(virDomainHasCurrentSnapshot): Use consistent spelling.
* src/libvirt.c (virConnectOpenAuth, virDomainCoreDump)
(virDomainGetXMLDesc, virNetworkGetXMLDesc)
(virNWFilterGetXMLDesc, do_open): Update accordingly.
Eric Blake [Thu, 30 Jun 2011 17:57:42 +0000 (11:57 -0600)]
build: fix virBufferVasprintf on mingw
Gnulib documents that mingw vsnprintf is broken (it returns -1
on out-of-space, instead of the count of what would have been
printed); but while we were using the snprintf wrapper, we had
not yet been using the vsnprintf wrapper.
Meanwhile, mingw (but not mingw64) has a replacement snprintf
that fixes return values, but still lacks %1$s support; so in
that case, gnulib didn't replace snprintf, but libintl then
went ahead and installed a version that supported %1$s but not
return values. Gnulib has since been fixed to guarantee that
the snprintf module will always guarantee the constraints needed
by libintl.
Also, we want to guarantee that strdup sets errno on failure.
* .gnulib: Update to latest, for vsnprintf fix.
* bootstrap.conf (gnulib_modules): Add vsnprintf, strdup-posix.
Reported by Matthias Bolte.
projects / people / liuw / libxenctrl-split / libvirt.git / log