Eric Blake [Thu, 27 Apr 2017 21:58:15 +0000 (16:58 -0500)]
qobject: Drop useless QObject casts
We have macros in place to make it less verbose to add a subtype
of QObject to both QDict and QList. While we have made cleanups
like this in the past (see commit fcfcd8ffc, for example), having
it be automated by Coccinelle makes it easier to maintain.
Patch created mechanically via:
spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h --dir . --in-place
then I verified that no manual touchups were required.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-5-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 27 Apr 2017 21:58:14 +0000 (16:58 -0500)]
coccinelle: Add script to remove useless QObject casts
We have macros in place to make it less verbose to add a subtype
of QObject to both QDict and QList. While we have made cleanups
like this in the past (see commit fcfcd8ffc, for example), having
it be automated by Coccinelle makes it easier to maintain.
The script is separate from the cleanups, for ease of review and
backporting. A later patch will then add further possible cleanups.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-4-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 27 Apr 2017 21:58:13 +0000 (16:58 -0500)]
pci: Reduce scope of error injection
No one outside of pcie_aer.h was using error injection; mark them
static for internal use.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-3-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Eric Blake [Thu, 27 Apr 2017 21:58:12 +0000 (16:58 -0500)]
pci: Use struct instead of QDict to pass back parameters
It's simpler to just use a C struct than it is to bundle things
into a QDict in one function just to pull them back out in the
caller. Plus, doing this gets rid of one more user of dynamic
JSON through qobject_from_jsonf(), as well as a memory leak of
the QDict.
While cleaning the code, fix things to report all errors (the
code was previously silently ignoring a failure of
pcie_aer_inject_error(), at a distance).
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20170427215821.19397-2-eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Gcc 7 (on Fedora 26) spotted odd use of integers instead of a
boolean; it's got a point.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170406154107.9178-1-dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Stefan Hajnoczi [Fri, 5 May 2017 16:04:07 +0000 (17:04 +0100)]
Merge remote-tracking branch 'elmarco/tags/chr-tests-pull-request' into staging
# gpg: Signature made Thu 04 May 2017 12:42:10 PM BST
# gpg: using RSA key 0xDAE8E10975969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* elmarco/tags/chr-tests-pull-request: (21 commits)
tests: add /char/console test
tests: add /char/udp test
tests: add /char/socket test
tests: add /char/file test
tests: add /char/pipe test
tests: add alias check in /char/ringbuf
char-udp: flush as much buffer as possible
char-socket: add 'connected' property
char-socket: add 'addr' property
char-socket: update local address after listen
char-socket: introduce update_disconnected_filename()
char: useless NULL check
char: remove chardevs list
char: remove qemu_chardev_add
char: use /chardevs container instead of chardevs list
vl: add todo note about root container cleanup
char: add a /chardevs container
container: don't leak container reference
xen: use a better chardev type check
mux: simplfy muxes_realize_done
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Fri, 5 May 2017 15:56:23 +0000 (16:56 +0100)]
Merge remote-tracking branch 'cohuck/tags/s390x-3270-20170504' into staging
Basic support for using channel-attached 3270 'green-screen'
devices via tn3270. Actual handling of the data stream is
delegated to x3270; more info at http://wiki.qemu.org/Features/3270
# gpg: Signature made Thu 04 May 2017 11:36:51 AM BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* cohuck/tags/s390x-3270-20170504:
s390x/3270: Mark non-migratable and enable the device
s390x/3270: Detect for continued presence of a 3270 client
s390x/3270: Add the TCP socket events handler for 3270
s390x/3270: 3270 data stream handling
s390x/3270: Add emulated terminal3270 device
s390x/3270: Add abstract emulated ccw-attached 3270 device
s390x/css: Add an algorithm to find a free chpid
chardev: Basic support for TN3270
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# gpg: Signature made Thu 04 May 2017 10:35:41 AM BST
# gpg: using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* quintela/tags/migration/20170504:
migration: Extra tracing
migration: Move postcopy-ram.h to migration/
monitor: Move hmp_info_snapshots from savevm.c to hmp.c
monitor: Move hmp_delvm from savevm.c to hmp.c
monitor: Move hmp_savevm from savevm.c to hmp.c
monitor: Move hmp_loadvm from monitor.c to hmp.c
monitor: Remove monitor parameter from save_vmstate
migration: to_dst_file at that point is NULL
migration: setup bi-directional I/O channel for exec: protocol
ram: Split dirty bitmap by RAMBlock
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Fri, 5 May 2017 15:46:51 +0000 (16:46 +0100)]
Merge remote-tracking branch 'kraxel/tags/pull-audio-20170504-1' into staging
audio: cleanups, bugfixes (memory leaks).
# gpg: Signature made Thu 04 May 2017 08:16:50 AM BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* kraxel/tags/pull-audio-20170504-1: (30 commits)
audio: Use ARRAY_SIZE from qemu/osdep.h
audio: un-export OPLResetChip
audio: Remove unused typedefs
audio: UpdateHandler is not used anymore
audio: IRQHandler is not used anymore
audio: OPLSetUpdateHandler is not used anywhere
audio: OPLSetIRQHandler is not used anywhere
audio: GUSsample is int16_t
audio: GUSword is uint16_t
audio: GUSword is uint16_t
audio: remove GUSchar
audio: GUSbyte is uint8_t
audio: Remove unused fields
audio: Remove type field
audio: Remove Unused OPL_TYPE_*
audio: Unfold OPLSAMPLE
audio: Remove INT32
audio: remove INT16
audio: Remove INT8
audio: remove UINT32
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Fri, 5 May 2017 15:21:00 +0000 (16:21 +0100)]
Merge remote-tracking branch 'shorne/tags/pull-or-20170504' into staging
Openrisc Features and Fixes for qemu 2.10
# gpg: Signature made Thu 04 May 2017 01:41:45 AM BST
# gpg: using RSA key 0xC3B31C2D5E6627E4
# gpg: Good signature from "Stafford Horne <shorne@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: D9C4 7354 AEF8 6C10 3A25 EFF1 C3B3 1C2D 5E66 27E4
* shorne/tags/pull-or-20170504:
target/openrisc: Support non-busy idle state using PMR SPR
target/openrisc: Remove duplicate features property
target/openrisc: Implement full vmstate serialization
migration: Add VMSTATE_STRUCT_2DARRAY()
target/openrisc: implement shadow registers
migration: Add VMSTATE_UINTTL_2DARRAY()
target/openrisc: add numcores and coreid support
target/openrisc: Fixes for memory debugging
target/openrisc: Implement EPH bit
target/openrisc: Implement EVBAR register
MAINTAINERS: Add myself as openrisc maintainer
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Fri, 5 May 2017 14:59:56 +0000 (15:59 +0100)]
Merge remote-tracking branch 'cohuck/tags/s390x-20170502' into staging
More s390x patches, this time boot related:
- LOADPARM machine property, exposed to the guest via SCLP and
diagnose 308
- Use LOADPARM in the s390-ccw bios to select a boot entry
- Fix a crash in the ipl device code when a virtio-scsi-pci device
has been specified
* cohuck/tags/s390x-20170502:
hw/s390x/ipl: Fix crash with virtio-scsi-pci device
pc-bios/s390-ccw.img: update image
pc-bios/s390-ccw: add boot entry selection to El Torito routine
pc-bios/s390-ccw: add boot entry selection for ECKD DASD
pc-bios/s390-ccw: provide entry selection on LOADPARM for SCSI disk
pc-bios/s390-ccw: provide a function to interpret LOADPARM value
pc-bios/s390-ccw: get LOADPARM stored in SCP Read Info
pc-bios/s390-ccw: Make ebcdic/ascii conversion public
util/qemu-config: Add loadparm to qemu machine_opts
hw/s390x/sclp: update LOADPARM in SCP Info
hw/s390x/ipl: enable LOADPARM in IPIB for a boot device
hw/s390x: provide loadparm property for the machine
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Thu, 4 May 2017 12:44:32 +0000 (13:44 +0100)]
Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Fri 28 Apr 2017 09:20:17 PM BST
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* kwolf/tags/for-upstream: (34 commits)
progress: Show current progress on SIGINFO
iotests: fix exclusion option
iotests: clarify help text
qemu-img: use blk_co_pwrite_zeroes for zero sectors when compressed
qemu-img: improve convert_iteration_sectors()
block: assert no image modification under BDRV_O_INACTIVE
block: fix obvious coding style mistakes in block_int.h
qcow2: Allow discard of final unaligned cluster
block: Add .bdrv_truncate() error messages
block: Add errp to BD.bdrv_truncate()
block: Add errp to b{lk,drv}_truncate()
block/vhdx: Make vhdx_create() always set errp
qemu-img: Document backing options
qemu-img/convert: Move bs_n > 1 && -B check down
qemu-img/convert: Use @opts for one thing only
block: fix alignment calculations in bdrv_co_do_zero_pwritev
block: Do not unref bs->file on error in BD's open
iotests: 109: Filter out "len" of failed jobs
iotests: Fix typo in 026
Issue a deprecation warning if the user specifies the "-hdachs" option.
...
Message-id: 1493411622-5343-1-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is mainly useful to know the actual bound port when using port 0.
For example, when starting qemu with socket on port 0, before:
QEMU waiting for connection on: disconnected:tcp:localhost:0,server
After:
QEMU waiting for connection on: disconnected:tcp:localhost:32454,server
qemu_chardev_new() now uses object_new_with_props() with /chardevs
parent container. It will fail to insert the object if the same "id"
already exists. "chardevs" list usage has been removed in previous
commits.
mux_chr_event() already send events to all backends, rename it,
export it, and use it from muxes_realize_done. This should help abstract
away mux implementation.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
A couple more traces that would have made fixing that postcopy
bug a bit easier.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Jing Liu [Thu, 12 Jan 2017 09:38:25 +0000 (10:38 +0100)]
s390x/3270: Mark non-migratable and enable the device
Mark 3270 as non-migratable for the experimental stage. Enable
the 3270 device so that we can use x3270 client to operate the guest.
Run qemu with the arguments:
-chardev socket,id=char3270_0,host=0.0.0.0,port=23,nowait,server,tn3270 \
-device x-terminal3270,chardev=char3270_0,devno=fe.0.000a,id=terminal3270_0 \
There are some restrictions for the first stage: We don't support SSL
connections, multiple client connections and client resizing. Only
tested with the x3270 client.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Jing Liu [Fri, 14 Oct 2016 09:16:23 +0000 (11:16 +0200)]
s390x/3270: Detect for continued presence of a 3270 client
To ensure that we do not keep any 3270 sockets where the client is not
connected anymore, we send a packet with the timing mark option after
ten minutes of client inactivity. If the client does not answer it,
then the socket will be closed automatically.
This helps to ensure that there is no half-open situation on the 3270
socket.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Jing Liu [Fri, 1 Apr 2016 06:32:58 +0000 (08:32 +0200)]
s390x/3270: 3270 data stream handling
This introduces the input and output handlers for 3270 device, setting
up the data tunnel among guest kernel, qemu and the 3270 client.
After the client connected and TN3270 handshake done, signal the not-ready
to ready status by an unsolicited device-end interrupt, and then the 3270
data stream could be handled correctly between the channel and socket.
Multiple commands generated by "Reset" key on x3270 are not supported now,
just simply terminate the connection.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Yang Chen [Fri, 19 Feb 2016 09:45:26 +0000 (10:45 +0100)]
s390x/3270: Add emulated terminal3270 device
This is a basic implementation of the emulated ccw-attached 3270
called x-terminal3270, which provides visibility of the device in
the qemu monitor and guest. The x prefix indicates that this is
just an experimental implementation for the current stage. This
device will not be compiled until the basic functions are available.
Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com> Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Jing Liu [Mon, 19 Sep 2016 07:10:43 +0000 (09:10 +0200)]
s390x/css: Add an algorithm to find a free chpid
This introduces a function named css_find_free_chpid() to find a
free channel path. Because virtio-ccw device used zero as its
channel path number, it would be sensible to skip the reserved one
and search upwards.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Jing Liu [Fri, 23 Sep 2016 06:06:11 +0000 (08:06 +0200)]
chardev: Basic support for TN3270
This introduces basic support for TN3270, which needs to negotiate
three Telnet options during handshake:
- End of Record
- Binary Transmission
- Terminal-Type
As a basic implementation, this simply ignores NOP and Interrupt
Process(IP) commands. More work should be done for them later.
For more details, please refer to RFC 854 and 1576.
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Signed-off-by: Yang Chen <bjcyang@linux.vnet.ibm.com> Reviewed-by: QingFeng Hao <haoqf@linux.vnet.ibm.com> Acked-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Juan Quintela [Tue, 18 Apr 2017 09:51:06 +0000 (11:51 +0200)]
monitor: Move hmp_info_snapshots from savevm.c to hmp.c
It only uses block/* functions, nothing from migration.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Juan Quintela [Tue, 18 Apr 2017 09:46:23 +0000 (11:46 +0200)]
monitor: Move hmp_delvm from savevm.c to hmp.c
It really uses block/* stuff, not migration one.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Juan Quintela [Tue, 18 Apr 2017 09:44:16 +0000 (11:44 +0200)]
monitor: Move hmp_savevm from savevm.c to hmp.c
It is a monitor command, and has nothing migration specific in it.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Juan Quintela [Tue, 18 Apr 2017 09:40:56 +0000 (11:40 +0200)]
monitor: Move hmp_loadvm from monitor.c to hmp.c
We are going to move the rest of hmp snapshots functions there instead
of monitor.c.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Juan Quintela [Tue, 18 Apr 2017 09:35:04 +0000 (11:35 +0200)]
monitor: Remove monitor parameter from save_vmstate
load_vmstate() already use error_report, so be consistent. There is
an identical error message in load_vmstate() that ends in a
period. Remove it.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Juan Quintela [Wed, 5 Apr 2017 15:32:56 +0000 (17:32 +0200)]
migration: to_dst_file at that point is NULL
We have just arrived as:
migration.c: qemu_migrate()
....
s = migrate_init() <- puts it to NULL
....
{tcp,unix}_start_outgoing_migration ->
socket_outgoing_migration
migration_channel_connect()
sets to_dst_file
if tls is enabled, we do another round through
migrate_channel_tls_connect(), but we only set it up if there is no
error. So we don't need the assignation. I am removing it to remove
in the follwing patches the knowledge about MigrationState in that two
files.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
migration: setup bi-directional I/O channel for exec: protocol
Historically the migration data channel has only needed to be
unidirectional. Thus the 'exec:' protocol was requesting an
I/O channel with O_RDONLY on incoming side, and O_WRONLY on
the outgoing side.
This is fine for classic migration, but if you then try to run
TLS over it, this fails because the TLS handshake requires a
bi-directional channel.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
target/openrisc: Support non-busy idle state using PMR SPR
The OpenRISC architecture has the Power Management Register (PMR)
special purpose register to manage cpu power states. The interesting
modes are:
* Doze Mode (DME) - Stop cpu except timer & pic - wake on interrupt
* Sleep Mode (SME) - Stop cpu and all units - wake on interrupt
* Suspend Model (SUME) - Stop cpu and all units - wake on reset
The linux kernel will set DME when idle.
This patch implements the PMR SPR and halts the qemu cpu when there is a
change to DME or SME. This means that openrisc qemu in no longer peggs
a host cpu at 100%.
In order for this to work we need to kick the CPU when timers are
expired. Update the cpu timer to kick the cpu upon each timer event.
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Stafford Horne <shorne@gmail.com>
target/openrisc: Remove duplicate features property
The features property has stored the exact same thing as the cpucfgr
spr. Remove the feature enum and property as it is not needed.
In order to preserve the behavior or keeping features accross reset this
patch moves cpucfgr into the non reset region of the state struct. Since
the cpucfgr is read only this means we only need to sset cpucfgr once
during class init.
target/openrisc: Implement full vmstate serialization
Previously serialization did not persist the tlb, timer, pic and other
key state items. This meant snapshotting and restoring a running os
would crash. After adding these I am able to take snapshots of a
running linux os and restore at a later time.
I am currently not trying to maintain capatibility with older versions
as I do not believe this really worked before or anyone used it.
Shadow registers are part of the openrisc spec along with sr[cid], as
part of the fast context switching feature. When exceptions occur,
instead of having to save registers to the stack if enabled the CID will
increment and a new set of registers will be available.
This patch only implements shadow registers which can be used as extra
scratch registers via the mfspr and mtspr if required. This is
implemented in a way where it would be easy to add on the fast context
switching, currently cid is hardcoded to 0.
This is need for openrisc linux smp kernels to boot correctly.
In openRISC we are implementing the shadow registers as a 2d array.
Using this target long method rather than direct 32-bit alternatives is
consistent with the rest of our vm state serialization logic.
These are used to identify the processor in SMP system. Their
definition has been defined in verilog cores but it not yet part of the
spec but it will be soon.
The proposal for this is available:
https://openrisc.io/proposals/core-identifier-and-number-of-cores
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Stafford Horne <shorne@gmail.com>
Stafford Horne [Mon, 13 Mar 2017 14:53:29 +0000 (23:53 +0900)]
target/openrisc: Fixes for memory debugging
When debugging in gdb you might want to inspect instructions in mapped
pages or in exception vectors like 0x800 etc. This was previously not
possible in qemu since the *get_phys_page_debug() routine only looked
into the data tlb.
Change to fall back to look into instruction tlb and plain physical
pages.
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Stafford Horne <shorne@gmail.com>
Dong Jia Shi [Wed, 3 May 2017 20:52:35 +0000 (14:52 -0600)]
vfio/pci: Fix incorrect error message
When the "No host device provided" error occurs, the hint message
that starts with "Use -vfio-pci," makes no sense, since "-vfio-pci"
is not a valid command line parameter.
Correct this by replacing "-vfio-pci" with "-device vfio-pci".
Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
This patch enables 8-byte writes and reads to VFIO. Such implemention
is already done but it's missing the 'case' to handle such accesses in
both vfio_region_write and vfio_region_read and the MemoryRegionOps:
impl.max_access_size and impl.min_access_size.
vfio: Set MemoryRegionOps:max_access_size and min_access_size
Sets valid.max_access_size and valid.min_access_size to ensure safe
8-byte accesses to vfio. Today, 8-byte accesses are broken into pairs
of 4-byte calls that goes unprotected:
This happens because the 8-byte write should be broken into 4-byte
writes by memory.c:access_with_adjusted_size() in order to be under
the same lock. Today, it's done in exec.c:address_space_write_continue()
which was able to handle only 4 bytes due to a zero'ed
valid.max_access_size (see exec.c:memory_access_size()).
Signed-off-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Alexander Graf [Thu, 30 Mar 2017 14:22:55 +0000 (16:22 +0200)]
input: Add trace event for empty keyboard queue
When driving QEMU from the outside, we have basically no chance to
determine how quickly the guest OS picks up key events, so we usually
have to limit ourselves to very slow keyboard presses to make sure
the guest always has enough chance to pick them up.
This patch adds a trace events when the keyboarde queue is drained.
An external driver can use that as hint that new keys can be pressed.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1490883775-94658-1-git-send-email-agraf@suse.de Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qemu_input_event_send() discards key event when the guest is paused,
but not the delay.
The delay ends up in the input queue, and qemu_input_event_send_key()
will further fill the queue with upcoming events.
VNC uses qemu_input_event_send_key_delay(), not SPICE, which results
in a different input behaviour on pause: VNC will queue the events
(except the first that is discarded), SPICE will discard all events.
Don't queue delay if paused, and provide same behaviour on SPICE and
VNC clients on resume (and potentially avoid over-allocating the
buffer queue)
The problem is that the code in s390_gen_initial_iplb() currently assumes
that all SCSI devices are also CCW devices, which is not the case for
virtio-scsi-pci of course. Fix it by adding an appropriate check for
TYPE_CCW_DEVICE here.
Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1493126327-13162-1-git-send-email-thuth@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
projects / qemu-xen.git / log