aurel32 [Wed, 1 Oct 2008 22:01:37 +0000 (22:01 +0000)]
ppc: fix crash in ppc system single step support
There was a bogus case where two system debug ops get generated. This
patch removes the broken system debug op. This was a left over after
making some changes to correctly generate debug ops on branch
operations inside gen_goto_tb();
The test case against this patch is to turn on single stepping with
timers, boot a linux kernel, set a breakpoint a do_fork and in gdb
execute "si 3000". Then qemu-system-ppc will fault executing a debug
op, which should not have been executed.
aurel32 [Wed, 1 Oct 2008 21:45:51 +0000 (21:45 +0000)]
fix default size handling in monitor
If /i format is used once (with x/xp/p command) default_fmt_size is set
to -1 and subsequent commands of the form /x outputs nothing. Included
patched fixes this by setting default_fmt_size only if the command is
not of format /i.
A recent kvm merge with qemu brought code for 64bit power that broke cross
compilation. The issue is caused by configure trying to execute target
architecture binaries where configure is executed.
- Convert FP ops to TCG
- Fix S format
- Implement F and G formats (untested)
- Fix MF_FPCR an MT_FPCR
- Fix FTOIS, FTOIT, ITOFF, ITOFS, ITOFT
- Fix CPYSN, CPYSE
My core2duo patch introduced a vague statement of "missing features" in
the CPUID specification. This patch addresses this by specifying exactly
what is missing.
While going along the missing CPUID entries I also stumbled across
invalid and missing CPUID #defines while comparing them to the Intel
Documentation. This patch also addresses these. I found them too minor
to split them up in a separate patch.
Furthermore I looked through CPUID functions > 5 and realized that it
should be safe to bump the level to 10. I tried booting Linux with that
and it worked fine.
Signed-off-by: Alexander Graf <agraf@suse.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5350 c046a42c-6fe2-441c-8c8c-71466251a162
This implements most of the logic of a real HCI (at least the pieces
marked as mandatory). It doesn't support keys, authentication etc.
It works on top of the LMP layer, which is not fully emulated because
software never has direct access to it.
This allows using a host's physical HCI as one of the HCIs attached
to the virtual machine. This brings various limitations because not
all commands/events are passed through by Linux kernel, some are
interpreted by the host's kernel for a speed gain.
Instead of having (current)three command line switches -std-vga,
-cirrusvga and -vmwarevga, provide one -vga switch which takes
an argument, so that:
qemu -std-vga becomes qemu -vga std
qemu -cirrusvga becomes qemu -vga cirrus
qemu -vmwarevga becomes qemu -vga vmware
Be more friendly when signalfd() fails, and also add configure checks to detect
that syscall(SYS_signalfd) actually works. malc pointed out that some installs
do not have /usr/include/linux headers that are in sync with the glibc headers
so why SYS_signalfd is defined, it's #defined to _NR_signalfd which is not
defined in the /usr/include/linux header.
While this is a distro bug, it doesn't hurt to do a more thorough job in
detection.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5334 c046a42c-6fe2-441c-8c8c-71466251a162
Implement an fd pool to get real AIO with posix-aio
This patch implements a simple fd pool to allow many AIO requests with
posix-aio. The result is significantly improved performance (identical to that
reported for linux-aio) for both cache=on and cache=off.
The fundamental problem with posix-aio is that it limits itself to one thread
per-file descriptor. I don't know why this is, but this patch provides a simple
mechanism to work around this (duplicating the file descriptor).
This isn't a great solution, but it seems like a reasonable intermediate step
between posix-aio and a custom thread-pool to replace it.
Ryan Harper will be posting some performance analysis he did comparing posix-aio
with fd pooling against linux-aio. The size of the posix-aio thread pool and
the fd pool were largely determined by him based on this analysis.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5323 c046a42c-6fe2-441c-8c8c-71466251a162
__GLIBC_PREREQ is defined in such a way that the ! cannot be used in front of
it on FreeBSD. Also, -lpthread is not implied by the build and we definitely
use it for compatfd support.
While at it, I added a default initialization for posix-aio that seems to
perform well in our testing.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5322 c046a42c-6fe2-441c-8c8c-71466251a162
On Intel CPUs, sysenter and sysexit are valid in 64-bit mode. This patch
makes both 64-bit aware and enables them for Intel CPUs.
Add cpu save/load for 64-bit wide sysenter variables.
Signed-off-by: Alexander Graf <agraf@suse.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5318 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a Core 2 Duo CPU to the available CPU types. The CPU
definition tries to resemble a real CPU as good as possible, whilst not
exposing features qemu does not implement.
The patch also includes some minor additions that Core 2 Duo CPUs have:
- New MSR: MSR_IA32_PERF_STATUS
- CPUID up to level 5 (cache info and mwait)
Signed-off-by: Alexander Graf <agraf@suse.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5317 c046a42c-6fe2-441c-8c8c-71466251a162
Right now CPU vendor identification contains a lot of magic numbers. The
patch cleans them up to defines, so we can identify the CPU later on
without copying magic numbers.
Signed-off-by: Alexander Graf <agraf@suse.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5316 c046a42c-6fe2-441c-8c8c-71466251a162
fix bug in block-qcow2.c:alloc_cluster_offset() (Shahar Frank)
During the debugging of the new revision of the zero dedup patch I
stepped on the following bug in block-qcow2.c:alloc_cluster_offset(). I
am not sure what the exact damage this bug can do, but it may be very
nasty because you way not notice it effects until you will do some
snapshot operations or similar actions that rely on the reference
counting.
The bug is easy to spot using the new "check" verb I added to the
qemu-img in one of the previous patches. I will resend the qemu-img
patch again with the new version of the zero dedup.
Signed-off-by: Shahar Frank <shaharf@qumranet.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5313 c046a42c-6fe2-441c-8c8c-71466251a162
Reintroduce TEXT_CONSOLE_FIXED_SIZE and TEXT_CONSOLE for resizable vc's.
This partially reverts r4812 to fix an issue highlighted by Ryan Harper
with all vc's being fixed size which prevented backends with resizable
window (curses) from displaying okay.
Add missing dependencies for qemu-doc.* (Stefan Weil)
This patch fixes some items in Makefile:
* remove duplicate entries from .PHONY
* add missing entries to .PHONY
* sort entries in .PHONY alphabetically
* add missing dependencies for qemu-doc.* targets
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5307 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows to use a "real" SCSI tape with qemu using
"-drive /dev/sgX,if=scsi".
It allows to decode correctly transfer length when the type of the
device is a tape.
Some issues remain when the application reading the tape tries to go
beyond the end of the stream (but they must be corrected at the SCSI
controller level).
RedHat 9 shipped glibc 2.3. Modern versions of glibc do not have the aio thread
exit issue that the comment references. This patch adjusts the check to only
limit aio_init on glibc versions < 2.4.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5304 c046a42c-6fe2-441c-8c8c-71466251a162
Fix formatting for documentation of nbd command line options.
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5301 c046a42c-6fe2-441c-8c8c-71466251a162
Refactor AIO to allow multiple AIO implementations
This patch refactors the AIO layer to allow multiple AIO implementations. It's
only possible because of the recent signalfd() patch.
Right now, the AIO infrastructure is pretty specific to the block raw backend.
For other block devices to implement AIO, the qemu_aio_wait function must
support registration. This patch introduces a new function,
qemu_aio_set_fd_handler, which can be used to register a file descriptor to be
called back. qemu_aio_wait() now polls a set of file descriptors registered
with this function until one becomes readable or writable.
This patch should allow the implementation of alternative AIO backends (via a
thread pool or linux-aio) and AIO backends in non-traditional block devices
(like NBD).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5297 c046a42c-6fe2-441c-8c8c-71466251a162
projects / qemu-xen-4.5-testing.git / log