Model fp_exception state, in which only fp stores are allowed
until such time as the FQ has been flushed.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Carl Hauser <chauser@pullman.com>
Invalid encoding of addr should raise TT_ILL_INSN, so
check before supervisor, which might raise TT_PRIV_INSN.
Clear QNE after execution.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2340 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Carl Hauser <chauser@pullman.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Carl Hauser <chauser@pullman.com>
Carl Hauser [Fri, 16 Aug 2024 02:36:13 +0000 (12:36 +1000)]
target/sparc: Populate sparc32 FQ when raising fp exception
Implement a single instruction floating point queue,
populated while delivering an fp exception.
Signed-off-by: Carl Hauser <chauser@pullman.com>
[rth: Split from a larger patch] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Carl Hauser <chauser@pullman.com>
Carl Hauser [Fri, 16 Aug 2024 00:02:41 +0000 (10:02 +1000)]
target/sparc: Add FQ and FSR.QNE
Add support for, and migrate, a single-entry fp
instruction queue for sparc32.
Signed-off-by: Carl Hauser <chauser@pullman.com>
[rth: Split from a larger patch;
adjust representation with union;
add migration state] Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Carl Hauser <chauser@pullman.com>
Peter Maydell [Wed, 11 Sep 2024 12:17:29 +0000 (13:17 +0100)]
Merge tag 'pull-testing-gdbstub-oct-100924-1' of https://gitlab.com/stsquad/qemu into staging
testing and gdbstub updates:
- remove docker-armel-cross
- update i686 and mipsel images to bookworm
- use docker-all-test-cross for mips64le tests
- fix duplicated line in docs
- update gitlab-runner ansible script
- support MTE in gdbstub for system mode
* tag 'pull-testing-gdbstub-oct-100924-1' of https://gitlab.com/stsquad/qemu:
tests/tcg/aarch64: Extend MTE gdbstub tests to system mode
tests/tcg/aarch64: Improve linker script organization
tests/guest-debug: Support passing arguments to the GDB test script
gdbstub: Add support for MTE in system mode
gdbstub: Use specific MMU index when probing MTE addresses
scripts/ci: update the gitlab-runner playbook
docs/devel: fix duplicate line
tests/docker: use debian-all-test-cross for mips64el tests
tests/docker: update debian i686 and mipsel images to bookworm
tests/docker: remove debian-armel-cross
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
tests/tcg/aarch64: Extend MTE gdbstub tests to system mode
Extend MTE gdbstub tests to also run in system mode (share tests between
user mode and system mode). The tests will only run if a version of GDB
that supports MTE on baremetal is available in the test environment and
if available compiler supports the 'memtag' flag
(-march=armv8.5-a+memtag).
For the tests running in system mode, a page that supports MTE ops. is
necessary. Therefore, an MTE-enabled page is made available (mapped) in
the third 2 MB chunk of the second 1 GB space in the flat mapping set in
boot.S. A new binary, mte.S, is also introduced for the tests. It links
against boot.S and is executed by QEMU in system mode.
tests/guest-debug: Support passing arguments to the GDB test script
This commit adds support for passing arguments to the GDB test scripts
so it's possible to parse the args in an "argparse way" in the test
scripts launched by the runner. The arguments should be preceded by --
when passed to the runner. For example, passing "--help" arg to the
GDB_TEST_SCRIPT:
The test script should not use the argparse module directly but import
arg_parser from test_gdbstub module. arg_parser then can be used just
like the argparse.ArgumentParser class:
The arg_parser allows a smooth and informative exit if, for instance,
the caller of the runner script passes an invalid argument or misses a
required argument by the test script.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240906143316.657436-4-gustavo.romero@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-9-alex.bennee@linaro.org>
This commit makes handle_q_memtag, handle_q_isaddresstagged, and
handle_Q_memtag stubs build for system mode, allowing all GDB
'memory-tag' subcommands to work with QEMU gdbstub on aarch64 system
mode.
gdbstub: Use specific MMU index when probing MTE addresses
Use cpu_mmu_index() to determine the specific translation regime (MMU
index) before probing addresses using allocation_tag_mem_probe().
Currently, the MMU index is hardcoded to 0 and only works for user mode.
By obtaining the specific MMU index according to the translation regime,
future use of the stubs relying on allocation_tag_mem_probe in other
regimes will be possible, like in EL1.
This commit also changes the ptr_size value passed to
allocation_tag_mem_probe() from 8 to 1. The ptr_size parameter actually
represents the number of bytes in the memory access (which can be as
small as 1 byte), rather than the number of bits used in the address
space pointed to by ptr.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240906143316.657436-2-gustavo.romero@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-7-alex.bennee@linaro.org>
Alex Bennée [Tue, 10 Sep 2024 17:38:54 +0000 (18:38 +0100)]
docs/devel: fix duplicate line
I guess the same change came in via two patch series. Remove the
repetition.
Fixes: 2a851fca9f (docs/devel: remind developers to run CI container pipeline when updating images) Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-5-alex.bennee@linaro.org>
Alex Bennée [Tue, 10 Sep 2024 17:38:53 +0000 (18:38 +0100)]
tests/docker: use debian-all-test-cross for mips64el tests
While the mips64el cross compilation environment is busted in Debian
we can use the debian-all-test-cross image for building TCG tests like
we do in the CI.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-4-alex.bennee@linaro.org>
Alex Bennée [Tue, 10 Sep 2024 17:38:52 +0000 (18:38 +0100)]
tests/docker: update debian i686 and mipsel images to bookworm
Whatever issues there were which stopped these being updates when the
rest were have now been resolved. However mips64el continues to be
broken so don't update it here.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-3-alex.bennee@linaro.org>
Alex Bennée [Tue, 10 Sep 2024 17:38:51 +0000 (18:38 +0100)]
tests/docker: remove debian-armel-cross
As debian-11 transitions to LTS we are starting to have problems
building the image. While we could update to a later Debian building a
32 bit QEMU without modern floating point is niche host amongst the
few remaining 32 bit hosts we regularly build for. For now we still
have armhf-debian-cross-container which is currently built from the
more recent debian-12.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240910173900.4154726-2-alex.bennee@linaro.org>
* tag 'pull-qapi-2024-09-10' of https://repo.or.cz/qemu/armbru:
qapi/vfio: Rename VfioMigrationState to Qapi*, and drop prefix
qapi/cryptodev: Rename QCryptodevBackendAlgType to *Algo, and drop prefix
qapi/cryptodev: Drop unwanted 'prefix'
qapi/crypto: Rename QCryptoAFAlg to QCryptoAFAlgo
qapi/crypto: Rename QCryptoRSAPaddingAlgorithm to *Algo, and drop prefix
qapi/crypto: Rename QCryptoAkCipherAlgorithm to *Algo, and drop prefix
qapi/crypto: Rename QCryptoIVGenAlgorithm to *Algo, and drop prefix
qapi/crypto: Rename QCryptoCipherAlgorithm to *Algo, and drop prefix
qapi/crypto: Rename QCryptoHashAlgorithm to *Algo, and drop prefix
qapi/crypto: Drop unwanted 'prefix'
qapi/machine: Rename CpuS390* to S390Cpu*, and drop 'prefix'
qapi/ui: Drop temporary 'prefix'
qapi/machine: Drop temporary 'prefix'
qapi/ebpf: Drop temporary 'prefix'
qapi/crypto: Drop temporary 'prefix'
qapi/common: Drop temporary 'prefix'
qapi/block-core: Drop temporary 'prefix'
tests/qapi-schema: Drop temporary 'prefix'
qapi: Smarter camel_to_upper() to reduce need for 'prefix'
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qapi/cryptodev: Rename QCryptodevBackendAlgType to *Algo, and drop prefix
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptodevBackendAlgType has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTODEV_BACKEND_ALG.
We could simply drop 'prefix', but I think the abbreviation "alg" is
less than clear.
Additionally rename the type to QCryptodevBackendAlgoType. The prefix
becomes QCRYPTODEV_BACKEND_ALGO_TYPE.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-19-armbru@redhat.com>
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptodevBackendServiceType has a 'prefix' that overrides the
generated enumeration constants' prefix to QCRYPTODEV_BACKEND_SERVICE.
Drop it. The prefix becomes QCRYPTODEV_BACKEND_SERVICE_TYPE.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-18-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-17-armbru@redhat.com>
qapi/crypto: Rename QCryptoRSAPaddingAlgorithm to *Algo, and drop prefix
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoRSAPaddingAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_RSA_PADDING_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_RSA_PADDING_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoRSAPaddingAlg, but I
think the abbreviation "alg" is less than clear.
Rename the type to QCryptoRSAPaddingAlgo instead. The prefix becomes
QCRYPTO_RSA_PADDING_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-16-armbru@redhat.com>
qapi/crypto: Rename QCryptoAkCipherAlgorithm to *Algo, and drop prefix
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoAkCipherAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_AKCIPHER_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_AK_CIPHER_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoAkCipherAlg, but I
think the abbreviation "alg" is less than clear.
Rename the type to QCryptoAkCipherAlgo instead. The prefix becomes
QCRYPTO_AK_CIPHER_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-15-armbru@redhat.com>
qapi/crypto: Rename QCryptoIVGenAlgorithm to *Algo, and drop prefix
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoIVGenAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_IVGEN_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_IV_GEN_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoIVGenAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoIVGenAlgo instead. The prefix becomes
QCRYPTO_IV_GEN_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-14-armbru@redhat.com>
qapi/crypto: Rename QCryptoCipherAlgorithm to *Algo, and drop prefix
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoCipherAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_CIPHER_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_CIPHER_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoCipherAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoCipherAlgo instead. The prefix becomes
QCRYPTO_CIPHER_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-13-armbru@redhat.com>
qapi/crypto: Rename QCryptoHashAlgorithm to *Algo, and drop prefix
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoHashAlgorithm has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_HASH_ALG.
We could simply drop 'prefix', but then the prefix becomes
QCRYPTO_HASH_ALGORITHM, which is rather long.
We could additionally rename the type to QCryptoHashAlg, but I think
the abbreviation "alg" is less than clear.
Rename the type to QCryptoHashAlgo instead. The prefix becomes to
QCRYPTO_HASH_ALGO.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-12-armbru@redhat.com>
[Conflicts with merge commit 7bbadc60b58b resolved]
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
QCryptoAkCipherKeyType has a 'prefix' that overrides the generated
enumeration constants' prefix to QCRYPTO_AKCIPHER_KEY_TYPE.
Drop it. The prefix becomes QCRYPTO_AK_CIPHER_KEY_TYPE.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-11-armbru@redhat.com>
qapi/machine: Rename CpuS390* to S390Cpu*, and drop 'prefix'
QAPI's 'prefix' feature can make the connection between enumeration
type and its constants less than obvious. It's best used with
restraint.
CpuS390Entitlement has a 'prefix' to change the generated enumeration
constants' prefix from CPU_S390_ENTITLEMENT to S390_CPU_ENTITLEMENT.
Rename the type to S390CpuEntitlement, so that 'prefix' is not needed.
Likewise change CpuS390Polarization to S390CpuPolarization, and
CpuS390State to S390CpuState.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com> Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240904111836.3273842-10-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This improves HmatLBDataType's generated enumeration
constant prefix from HMATLB_DATA_TYPE to HMAT_LB_DATA_TYPE, and
HmatLBMemoryHierarchy's from HMATLB_MEMORY_HIERARCHY to
HMAT_LB_MEMORY_HIERARCHY.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240904111836.3273842-8-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added two temporary 'prefix' to delay changing the generated
code.
Revert them. This improves QCryptoBlockFormat's generated enumeration
constant prefix from Q_CRYPTO_BLOCK_FORMAT to QCRYPTO_BLOCK_FORMAT,
and QCryptoBlockLUKSKeyslotState's from
Q_CRYPTO_BLOCKLUKS_KEYSLOT_STATE to QCRYPTO_BLOCK_LUKS_KEYSLOT_STATE.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-6-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This improves XDbgBlockGraphNodeType's generated
enumeration constant prefix from
X_DBG_BLOCK_GRAPH_NODE_TYPE_BLOCK_BACKEND to
XDBG_BLOCK_GRAPH_NODE_TYPE_BLOCK_BACKEND.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240904111836.3273842-4-armbru@redhat.com>
Recent commit "qapi: Smarter camel_to_upper() to reduce need for
'prefix'" added a temporary 'prefix' to delay changing the generated
code.
Revert it. This changes TestUnionEnumA's generated enumeration
constant prefix from TEST_UNION_ENUMA to TEST_UNION_ENUM_A.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240904111836.3273842-3-armbru@redhat.com>
qapi: Smarter camel_to_upper() to reduce need for 'prefix'
camel_to_upper() converts its argument from camel case to upper case
with '_' between words. Used for generated enumeration constant
prefixes.
When some of the words are spelled all caps, where exactly to insert
'_' is guesswork. camel_to_upper()'s guesses are bad enough in places
to make people override them with a 'prefix' in the schema.
Rewrite it to guess better:
1. Insert '_' after a non-upper case character followed by an upper
case character:
OneTwo -> ONE_TWO
One2Three -> ONE2_THREE
2. Insert '_' before the last upper case character followed by a
non-upper case character:
ACRONYMWord -> ACRONYM_Word
Except at the beginning (as in OneTwo above), or when there is
already one:
AbCd -> AB_CD
This changes the default enumeration constant prefix for a number of
enums. Generated enumeration constants change only where the default
is not overridden with 'prefix'.
The following enumerations without a 'prefix' change:
Add a 'prefix' so generated code doesn't change now. Subsequent
commits will remove most of them again. Two will remain:
MULTIFD_COMPRESSION, because migration code generally spells "multifd"
that way, and Q_KEY_CODE, because that one is baked into
subprojects/keycodemapdb/tools/keymap-gen.
The following enumerations with a 'prefix' change so that the prefix
is now superfluous:
enum old camel_to_upper()
new camel_to_upper() [equal to prefix]
------------------------------------------------------------------
BlkdebugIOType BLKDEBUGIO_TYPE
BLKDEBUG_IO_TYPE
QCryptoTLSCredsEndpoint Q_CRYPTOTLS_CREDS_ENDPOINT
QCRYPTO_TLS_CREDS_ENDPOINT
QCryptoSecretFormat Q_CRYPTO_SECRET_FORMAT
QCRYPTO_SECRET_FORMAT
QCryptoCipherMode Q_CRYPTO_CIPHER_MODE
QCRYPTO_CIPHER_MODE
QCryptodevBackendType Q_CRYPTODEV_BACKEND_TYPE
QCRYPTODEV_BACKEND_TYPE
QType [builtin] Q_TYPE
QTYPE
Drop these prefixes.
The following enumerations with a 'prefix' change without making the
'prefix' superfluous:
Subsequent commits will tweak things to remove most of these prefixes.
Only QAUTHZ_LIST_FORMAT and QAUTHZ_LIST_POLICY will remain.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240904111836.3273842-2-armbru@redhat.com>
Peter Maydell [Tue, 10 Sep 2024 10:19:22 +0000 (11:19 +0100)]
Merge tag 'migration-20240909-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request for 9.2
- Mattias's patch to support concurrent bounce buffers for PCI devices
- David's memory leak fix in dirty_memory_extend()
- Fabiano's CI fix to disable vmstate-static-checker test in compat tests
- Denis's patch that adds one more trace point for cpu throttle changes
- Yichen's multifd qatzip compressor support
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZt9VlhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wZ+4QD+NPzprFD7RF2DPHT5bdo6NTWFSZxW4dyD
# oFp2vhYDEAYA/A5TTfOh3QpYBOaP2PxztZIZSLgs1bokhp+sLM3/PVsK
# =6JYP
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 09 Sep 2024 21:07:50 BST
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20240909-pull-request' of https://gitlab.com/peterx/qemu:
system: improve migration debug
tests/migration: Add integration test for 'qatzip' compression method
migration: Introduce 'qatzip' compression method
migration: Add migration parameters for QATzip
meson: Introduce 'qatzip' feature to the build system
docs/migration: add qatzip compression feature
ci: migration: Don't run python tests in the compat job
softmmu/physmem: fix memory leak in dirty_memory_extend()
softmmu: Support concurrent bounce buffers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Right now migration_throttle() tracepoint lacks very important
important information, i.e. no one could easily say how much the guest
is throttled. This makes difficult to debug guest quality of service
during migration.
This patch adds one more tracepoint into cpu_throttle_set() which is
actually doing this job.
Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Peter Xu <peterx@redhat.com> CC: Fabiano Rosas <farosas@suse.de> CC: Paolo Bonzini <pbonzini@redhat.com> Link: https://lore.kernel.org/r/20240905191941.310592-1-den@openvz.org Signed-off-by: Peter Xu <peterx@redhat.com>
Bryan Zhang [Fri, 30 Aug 2024 23:27:21 +0000 (16:27 -0700)]
migration: Introduce 'qatzip' compression method
Adds support for 'qatzip' as an option for the multifd compression
method parameter, and implements using QAT for 'qatzip' compression and
decompression.
Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Prasad Pandit <pjp@fedoraproject.org> Signed-off-by: Bryan Zhang <bryan.zhang@bytedance.com> Signed-off-by: Hao Xiang <hao.xiang@linux.dev> Signed-off-by: Yichen Wang <yichen.wang@bytedance.com> Link: https://lore.kernel.org/r/20240830232722.58272-5-yichen.wang@bytedance.com Signed-off-by: Peter Xu <peterx@redhat.com>
ci: migration: Don't run python tests in the compat job
The vmstate-checker-script test has a bug that makes it flaky. It was
also committed by mistake and will be removed.
Since the migration-compat job takes the tests from the build-previous
job instead of the current HEAD, neither a fix or a removal of the
test will take effect for this release.
Disable the faulty/undesirable test by taking advantage that it only
runs if the PYTHON environment variable is set. This also disables the
analyze-migration-script test, but this is fine because that test
doesn't have migration compatibility implications.
Signed-off-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Thomas Huth <thuth@redhat.com> Link: https://lore.kernel.org/r/20240905185445.8179-1-farosas@suse.de
[peterx: Added a TODO to remove the line after 9.2 release, per thuth] Signed-off-by: Peter Xu <peterx@redhat.com>
softmmu/physmem: fix memory leak in dirty_memory_extend()
As reported by Peter, we might be leaking memory when removing the
highest RAMBlock (in the weird ram_addr_t space), and adding a new one.
We will fail to realize that we already allocated bitmaps for more
dirty memory blocks, and effectively discard the pointers to them.
Fix it by getting rid of last_ram_page() and by remembering the number
of dirty memory blocks that have been allocated already.
While at it, let's use "unsigned int" for the number of blocks, which
should be sufficient until we reach ~32 exabytes.
Looks like this leak was introduced as we switched from using a single
bitmap_zero_extend() to allocating multiple bitmaps:
bitmap_zero_extend() relies on g_renew() which should have taken care of
this.
Resolves: https://lkml.kernel.org/r/CAFEAcA-k7a+VObGAfCFNygQNfCKL=AfX6A4kScq=VSSK0peqPg@mail.gmail.com Reported-by: Peter Maydell <peter.maydell@linaro.org> Fixes: 5b82b703b69a ("memory: RCU ram_list.dirty_memory[] for safe RAM hotplug") Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Xu <peterx@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20240828090743.128647-1-david@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com>
Mattias Nissler [Mon, 19 Aug 2024 13:54:54 +0000 (06:54 -0700)]
softmmu: Support concurrent bounce buffers
When DMA memory can't be directly accessed, as is the case when
running the device model in a separate process without shareable DMA
file descriptors, bounce buffering is used.
It is not uncommon for device models to request mapping of several DMA
regions at the same time. Examples include:
* net devices, e.g. when transmitting a packet that is split across
several TX descriptors (observed with igb)
* USB host controllers, when handling a packet with multiple data TRBs
(observed with xhci)
Previously, qemu only provided a single bounce buffer per AddressSpace
and would fail DMA map requests while the buffer was already in use. In
turn, this would cause DMA failures that ultimately manifest as hardware
errors from the guest perspective.
This change allocates DMA bounce buffers dynamically instead of
supporting only a single buffer. Thus, multiple DMA mappings work
correctly also when RAM can't be mmap()-ed.
The total bounce buffer allocation size is limited individually for each
AddressSpace. The default limit is 4096 bytes, matching the previous
maximum buffer size. A new x-max-bounce-buffer-size parameter is
provided to configure the limit for PCI devices.
Peter Maydell [Mon, 9 Sep 2024 14:19:31 +0000 (15:19 +0100)]
Merge tag 'crypto-fixes-pull-request' of https://gitlab.com/berrange/qemu into staging
Various crypto fixes
* Support sha384 with glib crypto backend
* Improve error reporting for unsupported cipher modes
* Avoid memory leak when bad cipher mode is given
* Run pbkdf tests on macOS
* Runtime check for pbkdf hash impls with gnutls & gcrypt
* Avoid hangs counter pbkdf iterations on some Linux kernels
by using a throwaway thread for benchmarking performance
* Fix iotests expected output from gnutls errors
* tag 'crypto-fixes-pull-request' of https://gitlab.com/berrange/qemu:
crypto: Introduce x509 utils
crypto: Support SHA384 hash when using glib
crypto: Define macros for hash algorithm digest lengths
crypto: use consistent error reporting pattern for unsupported cipher modes
crypto: avoid leak of ctx when bad cipher mode is given
tests/unit: build pbkdf test on macOS
tests/unit: always build the pbkdf crypto unit test
crypto: check gnutls & gcrypt support the requested pbkdf hash
crypto: run qcrypto_pbkdf2_count_iters in a new thread
iotests: fix expected output from gnutls
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
An utility function for getting fingerprint from X.509 certificate
has been introduced. Implementation only provided using gnutls.
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
[DB: fixed missing gnutls_x509_crt_deinit in success path] Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
crypto: Define macros for hash algorithm digest lengths
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
crypto: use consistent error reporting pattern for unsupported cipher modes
Not all paths in qcrypto_cipher_ctx_new() were correctly distinguishing
between valid user input for cipher mode (which should report a user
facing error), vs program logic errors (which should assert).
Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
crypto: avoid leak of ctx when bad cipher mode is given
Fixes: Coverity CID 1546884 Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
tests/unit: always build the pbkdf crypto unit test
The meson rules were excluding the pbkdf crypto test when gnutls was the
crypto backend. It was then excluded again in #if statements in the test
file.
Rather than update these conditions, remove them all, and use the result
of the qcrypto_pbkdf_supports() function to determine whether to skip
test registration.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
crypto: check gnutls & gcrypt support the requested pbkdf hash
Both gnutls and gcrypt can be configured to exclude support for certain
algorithms via a runtime check against system crypto policies. Thus it
is not sufficient to have a compile time test for hash support in their
pbkdf implementations.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
crypto: run qcrypto_pbkdf2_count_iters in a new thread
CPU time accounting in the kernel has been demonstrated to have a
sawtooth pattern[1][2]. This can cause the getrusage system call to
not be as accurate as we are expecting, which can cause this calculation
to stall.
The kernel discussions shows that this inaccuracy happens when CPU time
gets big enough, so this patch changes qcrypto_pbkdf2_count_iters to run
in a fresh thread to avoid this inaccuracy. It also adds a sanity check
to fail the process if CPU time is not accounted.
* tag 'pull-request-2024-09-08' of https://gitlab.com/huth/qemu:
hw/nubus/nubus-device: Range check 'slot' property
hw/m68k/mcf5208: Add URLs for datasheets
hw/m68k/mcf5208: Avoid shifting off end of integer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 30 Aug 2024 17:34:52 +0000 (18:34 +0100)]
hw/nubus/nubus-device: Range check 'slot' property
The TYPE_NUBUS_DEVICE class lets the user specify the nubus slot
using an int32 "slot" QOM property. Its realize method doesn't do
any range checking on this value, which Coverity notices by way of
the possibility that 'nd->slot * NUBUS_SUPER_SLOT_SIZE' might
overflow the 32-bit arithmetic it is using.
Constrain the slot value to be less than NUBUS_SLOT_NB (16).
Resolves: Coverity CID 1464070 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240830173452.2086140-4-peter.maydell@linaro.org> Reviewed-by: Thomas Huth <huth@tuxfamily.org> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Peter Maydell [Fri, 30 Aug 2024 17:34:51 +0000 (18:34 +0100)]
hw/m68k/mcf5208: Add URLs for datasheets
The datasheets for the SoC and board we model here are still
available from the NXP website; add their URLs and titles for
future reference.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240830173452.2086140-3-peter.maydell@linaro.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Peter Maydell [Fri, 30 Aug 2024 17:34:50 +0000 (18:34 +0100)]
hw/m68k/mcf5208: Avoid shifting off end of integer
In m5208_sys_read(), we have a loop of n from 0 to 31, and we
calculate (2u << n). For the n == 31 iteration this will shift off
the top of the unsigned 32 bit integer.
This is harmless, because we're going to stop the loop with n == 31
anyway, but we can avoid the error by using 64-bit arithmetic here.
(The SDCS0 register is documented at
https://www.nxp.com/docs/en/reference-manual/MCF5208RM.pdf
section 18.4.5; we want the lower 5 bits to indicate the
RAM size, where 31 == 4GB, 30 == 2GB, and so on down.
As it happens, the layout of the mcf5208evb board memory map
means it doesn't make sense to have more than 1GB of RAM
in any case.)
Resolves: Coverity CID 1547727 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-ID: <20240830173452.2086140-2-peter.maydell@linaro.org> Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Peter Maydell [Fri, 6 Sep 2024 14:27:43 +0000 (15:27 +0100)]
Merge tag 'pull-ufs-20240906' of https://gitlab.com/jeuk20.kim/qemu into staging
ufs queue
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEUBfYMVl8eKPZB+73EuIgTA5dtgIFAmba268ACgkQEuIgTA5d
# tgLndA//T7zvQboCWE2Aw+al4/cJmpfc/BP7pKrCvrwskhAo2H5JvbJ20WZ+/I6E
# sLqXjsAQ4qPWUNi46aty/tCCmFWatBRKIyWOg1E8w1N1PCqM/aKFElENgi28iclj
# 3TlIU+++a6VJXMtKKqGb/d6cxXM9QtRgkfpGEnVTCD4sRX25WuWcWu+hwCipgzsr
# dul1Ez+mp62SfHN2QLPUd+Ft0SvyxybDA65JP9fCEJPJ+2dtLWPN9XGY+6PzW4dT
# UEfUEV2V5k3w/QHTR8yG2i5s56wWVUhtQEhazbkj1VqgUSJ8PvIvBLhQpi4Gd51G
# 62/xHJaHXPxgVrVE6Or/5QF9npo1moG7UrLgP+FYX5kto280wEyh3KxNhlan+lmI
# IGo7V3Xv6UgGudJ/ZjR4dw24atFDcaqmdnWAOOp7mwxUIAq/5xLeDw2fzvuUw78a
# cc732SF4XwTJfXwgiXkJXa/Si248fDtecvlD+lQ9wezSIJZq8Ojpe9uFREA4jPVY
# jfgXEoopvam4w4ZKFRg93/0QErgwsYaJKKIKD8wZ99pi8/zrWlq5W1ujefQuvujt
# FL4IbF/8g6i22fZgBr8AlkRn3epxx4oRGV+Rr8OXoFYjNR/E7rjKZYfbsJx/gDbO
# zEMzSImQ48Tlxl9vkIx5kkUDxw3d7MDvrXEORcTMSW53CUDXJyA=
# =U151
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 06 Sep 2024 11:38:39 BST
# gpg: using RSA key 5017D831597C78A3D907EEF712E2204C0E5DB602
# gpg: Good signature from "Jeuk Kim <jeuk20.kim@samsung.com>" [unknown]
# gpg: aka "Jeuk Kim <jeuk20.kim@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 5017 D831 597C 78A3 D907 EEF7 12E2 204C 0E5D B602
* tag 'pull-ufs-20240906' of https://gitlab.com/jeuk20.kim/qemu:
hw/ufs: ufs descriptor read test implemented
hw/ufs: ufs attribute read/write test implemented
hw/ufs: ufs flag read/write test implemented
hw/ufs: minor bug fixes related to ufs-test
hw/ufs: add basic info of query response upiu
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 5 Sep 2024 16:55:54 +0000 (17:55 +0100)]
tests/qtest: Bump timeout on ahci-test
On my OpenBSD VM test system, the ahci-test sometimes hits its 60 second
timeout. It has 75 subtests and allowing at least two seconds per
subtest seems reasonable. Bump it to 150s.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240905165554.320577-3-peter.maydell@linaro.org
Peter Maydell [Thu, 5 Sep 2024 16:55:53 +0000 (17:55 +0100)]
tests/qtest: Add missing qtest_quit() to stm32 tests
In the dm163-test and stm32l4x5_usart-test, a couple of subtests are
missing the qtest_quit() call. The effect of this is that on hosts
other than Linux and FreeBSD the test will timeout after executing
all the tests:
This happens because the qemu-system-arm binary which the test
starts does not exit, and because it shares the stdout with the
test binary, the overall meson test harness thinks the test is
still running. On Linux and FreeBSD we have an extra safety net
set up in qtest_spawn_qemu() which kills off any QEMU binary that
ends up without a parent. This is intended for the case where
QEMU crashed and didn't respond to a SIGTERM or polite request
to quit, but it also sidestepped the problem in this case.
However, OpenBSD doesn't have a PDEATHSIG equivalent, so we
see the timeouts when running a 'make vm-build-openbsd' run.
Add the missing qtest_quit() calls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240905165554.320577-2-peter.maydell@linaro.org
Peter Maydell [Fri, 6 Sep 2024 11:33:07 +0000 (12:33 +0100)]
Merge tag 'migration-20240904-pull-request' of https://gitlab.com/farosas/qemu into staging
Migration pull request
- Steve's cleanup of unused variable
- Peter Maydell's fixes for several leaks in migration-test
- Fabiano's flexibilization of multifd data structures for device
state migration
- Arman Nabiev's fix for ppc e500 migration
- Thomas' fix for migration-test vs. --without-default-devices
# -----BEGIN PGP SIGNATURE-----
#
# iQJEBAABCAAuFiEEqhtIsKIjJqWkw2TPx5jcdBvsMZ0FAmbYVXwQHGZhcm9zYXNA
# c3VzZS5kZQAKCRDHmNx0G+wxnRucEAC1vo046UGdUmbb4PaF5vKAg97io6RB2nrH
# HMz56Yc0AcAKRUGwe2Z80e2jY8B6zi8Ha8b9l7cVsej095eGCF+tINIL4wRX4lHm
# alDY/LkhuqjE5g5c/DaeTztyBOFLvdWHPU5eJyDOC9r7kSlnUcL1gAslH23b8uL0
# xvhPVKaTWjGIzNL1q/XfBr1WgRGqfD6dYb32HJDTq85yOnUT5sEr55aoEEu0euKh
# MYbXPmi5AMbrp8nP21kzUopX8iYERRdoKwhF0ZssciGi/qJVevH70tNdbDEQSxyp
# +vtP54TnL3LrzD4uY5Snng9zT9h0QrZujY79OEcxu20U0s29OQaudWkIjp7yLLUv
# UnPZHS+bIyaS53DdpV94GKGGBX1wrjGC/sn8eGYzmb2yMlMjLTBoE8L5r9cadshX
# XTeF4MtKGqaS3xDM2fIgACHHFl6qr/l0nENspv0raFzpf9Jx/WbpekghvTuWN6/B
# pZHnoOTNiAqXS/Rnyy829vsQ0Pw4hi6wx79Z73RP+35ubZTgTmOsQx9f2FjuEh6k
# JS+q9k4VJ+nntUWsYn4GS1Jlt+FXJ2hfzNj1NNFN4xLT1oioc6pCHsQyV7SBArB1
# ml2zYyfKCTC3riIRhcv/ew6OcKbhHcPFOpd/v0y40LO3mx8S0LZnUWXkcrl3XIZS
# Mj5CBdlFgA==
# =SRN4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 04 Sep 2024 13:41:32 BST
# gpg: using RSA key AA1B48B0A22326A5A4C364CFC798DC741BEC319D
# gpg: issuer "farosas@suse.de"
# gpg: Good signature from "Fabiano Rosas <farosas@suse.de>" [unknown]
# gpg: aka "Fabiano Almeida Rosas <fabiano.rosas@suse.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: AA1B 48B0 A223 26A5 A4C3 64CF C798 DC74 1BEC 319D
* tag 'migration-20240904-pull-request' of https://gitlab.com/farosas/qemu: (34 commits)
tests/qtest/migration: Add a check for the availability of the "pc" machine
target/ppc: Fix migration of CPUs with TLB_EMB TLB type
migration/multifd: Add documentation for multifd methods
migration/multifd: Add a couple of asserts for p->iov
migration/multifd: Fix p->iov leak in multifd-uadk.c
migration/multifd: Stop changing the packet on recv side
migration/multifd: Make MultiFDMethods const
migration/multifd: Move nocomp code into multifd-nocomp.c
migration/multifd: Register nocomp ops dynamically
migration/multifd: Standardize on multifd ops names
migration/multifd: Allow multifd sync without flush
migration/multifd: Replace multifd_send_state->pages with client data
migration/multifd: Don't send ram data during SYNC
migration/multifd: Isolate ram pages packet data
migration/multifd: Remove total pages tracing
migration/multifd: Move pages accounting into multifd_send_zero_page_detect()
migration/multifd: Replace p->pages with an union pointer
migration/multifd: Make MultiFDPages_t:offset a flexible array member
migration/multifd: Introduce MultiFDSendData
migration/multifd: Pass in MultiFDPages_t to file_write_ramblock_iov
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Yoochan Jeong [Thu, 22 Aug 2024 08:12:50 +0000 (17:12 +0900)]
hw/ufs: ufs descriptor read test implemented
New test function "ufstest_query_desc_request" added, which can check one's
virtual UFS device can properly read and its descriptor data.
(Writing descriptors are not implemented yet.)
The testcases attempt to read all kinds of descriptors at least once,
except for configuration descriptors (which are not implemented yet.)
There are some testcases that are intended to make an error caused by
an invalid index value or an invalid selector value.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com> Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com> Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Yoochan Jeong [Thu, 22 Aug 2024 08:11:51 +0000 (17:11 +0900)]
hw/ufs: ufs attribute read/write test implemented
New test function "ufstest_query_attr_request" added, which can check one's
virtual UFS device can properly read and write its attribute data.
It tests if reading and writing attributes work properly. There are
some testcases that are intended to make an error caused by writing an
invalid value, allocating an invalid selector and permission issues.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com> Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com> Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Yoochan Jeong [Thu, 22 Aug 2024 08:10:36 +0000 (17:10 +0900)]
hw/ufs: ufs flag read/write test implemented
New test function "ufstest_flag_request" added, which can check one's
virtual UFS device can properly read and write its flag data. It tests
if reading, setting, clearing and toggling flags work properly. There
are some testcases that are intended to make an error caused by
permission issues.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com> Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com> Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Yoochan Jeong [Thu, 22 Aug 2024 08:09:50 +0000 (17:09 +0900)]
hw/ufs: minor bug fixes related to ufs-test
Minor bugs and errors related to ufs-test are resolved. Some
permissions and code implementations that are not synchronized
with the ufs spec are edited.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com> Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com> Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Kyoungrul Kim [Fri, 2 Aug 2024 05:19:02 +0000 (14:19 +0900)]
hw/ufs: add basic info of query response upiu
Modify to fill the opcode, idn, index, selector information of
all Query Response UPIU. because attr and flag operation of query
response upiu need these information too.
Signed-off-by: KyoungrulKim <k831.kim@samsung.com> Reviewed-by: Minwoo Im <minwoo.im@samsung.com> Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com> Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
Peter Maydell [Thu, 5 Sep 2024 17:01:51 +0000 (18:01 +0100)]
Merge tag 'pull-request-2024-09-04' of https://gitlab.com/thuth/qemu into staging
* Bump Avocado to version 103
* Introduce new functional test framework for Python-based tests
* Convert many Avocado tests to the new functional test framework
* tag 'pull-request-2024-09-04' of https://gitlab.com/thuth/qemu: (42 commits)
docs/devel/testing: Add documentation for functional tests
docs/devel/testing: Rename avocado_qemu.Test class
docs/devel/testing: Split the Avocado documentation into a separate file
docs/devel: Split testing docs from the build docs and move to separate folder
gitlab-ci: Add "check-functional" to the build tests
tests/avocado: Remove unused QemuUserTest class
tests/functional: Convert ARM bFLT linux-user avocado test
tests/functional: Add QemuUserTest class
tests/functional: Convert mips64el Fuloong2e avocado test (1/2)
tests/functional: Convert Aarch64 Virt machine avocado tests
tests/functional: Convert Aarch64 SBSA-Ref avocado tests
tests/functional: Convert ARM Integrator/CP avocado tests
tests/functional: Convert the linux_initrd avocado test into a standalone test
tests/functional: Convert the rx_gdbsim avocado test into a standalone test
tests/functional: Convert the acpi-bits test into a standalone test
tests/functional: Convert the m68k nextcube test with tesseract
tests/functional: Convert the ppc_hv avocado test into a standalone test
tests/functional: Convert the ppc_amiga avocado test into a standalone test
tests/functional: Convert most ppc avocado tests into standalone tests
tests/functional: Convert the virtio_gpu avocado test into a standalone test
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Gao Shiyuan [Thu, 29 Aug 2024 13:10:05 +0000 (21:10 +0800)]
platform-bus: fix refcount leak
memory_region_find() returns an MR which it is the caller's
responsibility to unref, but platform_bus_map_mmio() was
forgetting to do so, thus leaking the MR.
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Message-id: 20240829131005.9196-1-gaoshiyuan@baidu.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/boot: Explain why load_elf_hdr() error is ignored
If the file is not an ELF file, arm_setup_direct_kernel_boot()
falls back to try it as a uimage or an AArch64 Image file or as
last resort a bare raw binary. We can discard load_elf_hdr()
error and silently return.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903144154.17135-1-philmd@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Changbin Du [Tue, 3 Sep 2024 13:39:40 +0000 (21:39 +0800)]
hw/arm/boot: Report error msg if loading elf/dtb failed
Print errors before exit. Do not exit silently.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Changbin Du <changbin.du@huawei.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903133940.3447430-1-changbin.du@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Sebastian Huber [Wed, 28 Aug 2024 00:50:19 +0000 (02:50 +0200)]
hw/arm/xilinx_zynq: Enable Security Extensions
The system supports the Security Extensions (core and GIC). This change is
necessary to run tests which pass on the real hardware.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-id: 20240828005019.57705-1-sebastian.huber@embedded-brains.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Fri, 30 Aug 2024 15:21:56 +0000 (16:21 +0100)]
target/arm: Correct names of VFP VFNMA and VFNMS insns
In vfp.decode we have the names of the VFNMA and VFNMS instructions
the wrong way around. The architecture says that bit 6 is the 'op'
bit, which is 1 for VFNMA and 0 for VFNMS, but we label these two
lines of decode the other way around. This doesn't cause any
user-visible problem because in the handling of these functions in
translate-vfp.c we give VFNMA the behaviour specified for VFNMS and
vice-versa, but it's confusing when reading the code.
Switch the names of the VFP VFNMA and VFNMS instructions in
the decode file and flip the behaviour also.
NB: the instructions VFMA and VFMS *are* decoded with op=0 for
VFMA and op=1 for VFMS; the confusion probably arose because
we assumed VFNMA and VFNMS to be the same way around.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2536 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240830152156.2046590-1-peter.maydell@linaro.org Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 3 Sep 2024 16:22:18 +0000 (17:22 +0100)]
hw/arm/sbsa-ref: Don't leak string in sbsa_fdt_add_gic_node()
In sbsa_fdt_add_gic_node() we g_strdup_printf() two nodename
strings, but only free one.
Since the string is actually entirely constant and we don't
make any use of printf's format-string operations, we can
drop the g_strdup_printf() use entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20240822162323.706382-1-peter.maydell@linaro.org
The TYPE_XLNX_VERSAL_EFUSE_CTRL device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f222b5b9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 420 43d49e1139e3f3071b1f22fac1e3e7249c9a6)
#1 0x7fbb10669c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f222f90c5d in register_init_block hw/core/register.c:248:34
#3 0x55f222f916be in register_init_block32 hw/core/register.c:299:12
#4 0x55f223bbdd15 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f225b23391 in object_init_with_type qom/object.c:420:9
#6 0x55f225b0a66b in object_initialize_with_type qom/object.c:562:5
#7 0x55f225b0bf0d in object_new_with_type qom/object.c:782:5
#8 0x55f225b0bfe1 in object_new qom/object.c:797:12
#9 0x55f226309e0d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-7-peter.maydell@linaro.org
The TYPE_XLNX_VERSAL_TRNG device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55842ec799d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 47496e53f3e779f1c7e9b82cbea07407152b498b)
#1 0x7fe793c75c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55842f0aec5d in register_init_block hw/core/register.c:248:34
#3 0x55842f0af6be in register_init_block32 hw/core/register.c:299:12
#4 0x55842f801588 in trng_init hw/misc/xlnx-versal-trng.c:614:9
#5 0x558431c411a1 in object_init_with_type qom/object.c:420:9
#6 0x558431c2847b in object_initialize_with_type qom/object.c:562:5
#7 0x558431c29d1d in object_new_with_type qom/object.c:782:5
#8 0x558431c29df1 in object_new qom/object.c:797:12
#9 0x558432427c1d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-6-peter.maydell@linaro.org
The TYPE_XLNX_ZYNQMP_EFUSE device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f3ff5839d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 23cf931c66865a71b6cc4da95156d03bc106fa72)
#1 0x7f3f31c6bc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f3ff9b8c5d in register_init_block hw/core/register.c:248:34
#3 0x55f3ff9b96be in register_init_block32 hw/core/register.c:299:12
#4 0x55f4005e5b25 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f40254afb1 in object_init_with_type qom/object.c:420:9
#6 0x55f40253228b in object_initialize_with_type qom/object.c:562:5
#7 0x55f402533b2d in object_new_with_type qom/object.c:782:5
#8 0x55f402533c01 in object_new qom/object.c:797:12
#9 0x55f402d31a2d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-5-peter.maydell@linaro.org
Peter Maydell [Tue, 3 Sep 2024 16:22:18 +0000 (17:22 +0100)]
hw/nvram/xlnx-bbram: Call register_finalize_block
The TYPE_XLNX_BBRAM device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x5641518ca9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 4a6 18cb63d57d5a19ed45cfc262b08da47eaafe5)
#1 0x7ff1aab31c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x564151cffc5d in register_init_block hw/core/register.c:248:34
#3 0x564151d006be in register_init_block32 hw/core/register.c:299:12
#4 0x56415293df75 in bbram_ctrl_init hw/nvram/xlnx-bbram.c:462:9
#5 0x564154891dc1 in object_init_with_type qom/object.c:420:9
#6 0x56415487909b in object_initialize_with_type qom/object.c:562:5
#7 0x56415487a93d in object_new_with_type qom/object.c:782:5
#8 0x56415487aa11 in object_new qom/object.c:797:12
#9 0x56415507883d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-4-peter.maydell@linaro.org
Peter Maydell [Tue, 3 Sep 2024 16:22:17 +0000 (17:22 +0100)]
hw/misc/xlnx-versal-trng: Free s->prng in finalize, not unrealize
The TYPE_XLNX_VERSAL_TRNG device creates s->prng with g_rand_new()
in its init method, but it frees it in its unrealize method. This
results in a leak in the QOM introspection "initialize-inspect-finalize"
lifecycle:
Direct leak of 2500 byte(s) in 1 object(s) allocated from:
#0 0x55ec89eae9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 6d5 08874816cc47d17c8dd775e8f809ae520e8cb)
#1 0x7f697018fc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x7f6970197738 in g_rand_new_with_seed_array debian/build/deb/../../../glib/grand.c:202:17
#3 0x7f6970197816 in g_rand_new debian/build/deb/../../../glib/grand.c:286:10
#4 0x55ec8aa3656a in trng_init hw/misc/xlnx-versal-trng.c:624:15
#5 0x55ec8ce75da1 in object_init_with_type qom/object.c:420:9
#6 0x55ec8ce5d07b in object_initialize_with_type qom/object.c:562:5
#7 0x55ec8ce5e91d in object_new_with_type qom/object.c:782:5
#8 0x55ec8ce5e9f1 in object_new qom/object.c:797:12
#9 0x55ec8d65c81d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Move the free to finalize so it matches where we are initing
s->prng. Since that's the only thing our unrealize method was
doing, this essentially switches the whole function to be
a finalize implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-3-peter.maydell@linaro.org
Peter Maydell [Tue, 3 Sep 2024 16:22:17 +0000 (17:22 +0100)]
hw/misc/xlnx-versal-cfu: destroy fifo in finalize
Since the TYPE_XNLX_VERSAL_CFU_FDRO device creates a FIFO in its
instance_init method, we must destroy the FIFO in instance_finalize
to avoid a memory leak for the QOM introspection
"instantiate-examine-finalize" cycle:
Direct leak of 8192 byte(s) in 1 object(s) allocated from:
#0 0x55ec89eae7ee in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d7ee) (BuildId: 6d508874816cc47d17c8dd775e8f809ae520e8cb)
#1 0x7f697018f738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x55ec8d98d98d in fifo8_create util/fifo8.c:27:18
#3 0x55ec8aa2a624 in fifo32_create /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/qemu/fifo32.h:35:5
#4 0x55ec8aa2a33c in cfu_fdro_init hw/misc/xlnx-versal-cfu.c:397:5
#5 0x55ec8ce75da1 in object_init_with_type qom/object.c:420:9
#6 0x55ec8ce5d07b in object_initialize_with_type qom/object.c:562:5
#7 0x55ec8ce5e91d in object_new_with_type qom/object.c:782:5
#8 0x55ec8ce5e9f1 in object_new qom/object.c:797:12
#9 0x55ec8d65c81d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com> Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-2-peter.maydell@linaro.org
Peter Maydell [Tue, 3 Sep 2024 16:22:17 +0000 (17:22 +0100)]
hw/arm/sbsa-ref: Use two-stage SMMU
Now that our SMMU model supports enabling both stages of translation
at once, we can enable this in the sbsa-ref board. Existing guest
code that only programs stage 1 and doesn't care about stage 2 should
continue to run with the same behaviour, but guests that do want to
do nested SMMU configurations can now do so.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20240816161350.3706332-5-peter.maydell@linaro.org
Peter Maydell [Tue, 3 Sep 2024 16:22:17 +0000 (17:22 +0100)]
hw/arm/virt: Default to two-stage SMMU from virt-9.2
Now that our SMMU model supports enabling both stages of translation
at once, we can enable this in the virt board. This is no change in
behaviour for guests, because if they simply ignore stage 2 and never
configure it then it has no effect. For the usual backwards
compatibility reasons we enable this only for machine types starting
with 9.2.
(Note that the SMMU is disabled by default on the virt board and is
only created if the user passes the 'iommu=smmuv3' machine option.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240816161350.3706332-4-peter.maydell@linaro.org
When we added support for nested (stage 1 + stage 2) translation
to the SMMU in commit 58377c363291d we forgot to update the
comment that documents the valid values of the "stage" property.
Add the new "nested" value to it.
Fixes: 58377c363291d ("hw/arm/smmuv3: Support and advertise nesting") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240816161350.3706332-3-peter.maydell@linaro.org
Add 9.2 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240816161350.3706332-2-peter.maydell@linaro.org
Message-id: 20240816103723.2325982-1-cohuck@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 3 Sep 2024 16:22:16 +0000 (17:22 +0100)]
accel/tcg: Remove dead code from rr_cpu_thread_fn()
The main loop in rr_cpu_thread_fn() can never terminate, so the
code at the end of the function to clean up the RCU subsystem is
dead code. Replace it with g_assert_not_reached().
(This is different from the other cpu_thread_fn for e.g. MTTCG or
for the KVM accelerator -- those can exit, if the vCPU they
are responsible for is unplugged. But the RR cpu thread fn
handles all CPUs in the system in a round-robin way, so even
if one is unplugged it keeps looping.)
Resolves: Coverity CID 1547782 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240815143634.3413679-1-peter.maydell@linaro.org
Peter Maydell [Tue, 3 Sep 2024 16:22:16 +0000 (17:22 +0100)]
target/arm: Enable FEAT_EBF16 in the "max" CPU
Now that we've implemented the required behaviour for FEAT_EBF16, we
can enable it for the "max" CPU type, list it in our documentation,
and delete a TODO comment about it being missing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 3 Sep 2024 16:22:16 +0000 (17:22 +0100)]
target/arm: Implement FPCR.EBF=1 semantics for bfdotadd()
Implement the FPCR.EBF=1 semantics for bfdotadd() operations:
* is_ebf() sets up fpst and fpst_odd
* bfdotadd_ebf() implements the fused paired-multiply-and-add
operation that we need
The paired-multiply-and-add is similar to f16_dotadd() and
we use the same trick here as in that function, but the inputs
here are bfloat16 rather than float16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 3 Sep 2024 16:22:15 +0000 (17:22 +0100)]
target/arm: Prepare bfdotadd() callers for FEAT_EBF support
We use bfdotadd() in four callsites for various helper functions. Currently
this all assumes that we have the FPCR.EBF=0 semantics. For FPCR.EBF=1
we will need to:
* call a different routine to bfdotadd() because we need to do a
fused multiply-add rather than separate multiply and add steps
* use a different float_status that honours the FPCR rounding mode
and denormal-flushing fields
* pass in an extra float_status that has been set up to perform
round-to-odd rounding
To prepare for this, refactor all the callsites so that instead of
for (...) {
x = bfdotadd(...);
}
they are:
float_status fpst, fpst_odd;
if (is_ebf(env, &fpst, &fpst_odd)) {
for (...) {
x = bfdotadd_ebf(..., &fpst, &fpst_odd);
}
} else {
for (...) {
x = bfdotadd(..., &fpst);
}
}
For the moment the is_ebf() function always returns false, sets up
fpst for EBF=0 semantics and never sets up fpst_odd; bfdotadd_ebf()
will assert if called. We'll fill in the handling for EBF=1 in the
next commit.
This change should be a zero-behaviour-change refactor.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 3 Sep 2024 16:22:14 +0000 (17:22 +0100)]
target/arm: Pass env pointer through to sme_bfmopa helper
To implement the FEAT_EBF16 semantics, we are going to need
the CPUARMState env pointer in every helper function which calls
bfdotadd().
Pass the env pointer through from generated code to the sme_bfmopa
helper. (We'll add the code that uses it when we've adjusted
all the helpers to have access to the env pointer.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 3 Sep 2024 16:22:14 +0000 (17:22 +0100)]
target/arm: Allow setting the FPCR.EBF bit for FEAT_EBF16
FEAT_EBF16 adds one new bit to the FPCR floating point control
register. Allow this bit to be read and written when the ID
registers indicate the presence of the feature.
Note that because this new bit is not in FPSCR_FPCR_MASK the bit is
not visible in the AArch32 FPSCR, and FPSCR writes do not affect it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
* tag 'edgar/xen-queue-2024-09-04.for-upstream' of https://gitlab.com/edgar.iglesias/qemu:
docs/system/i386: xenpvh: Add a basic description
hw/i386/xen: Add a Xen PVH x86 machine
hw/xen: pvh-common: Add support for creating PCIe/GPEX
hw/arm: xenpvh: Reverse virtio-mmio creation order
hw/arm: xenpvh: Rename xen_arm.c -> xen-pvh.c
hw/arm: xenpvh: Break out a common PVH machine
hw/arm: xenpvh: Move stubbed functions to xen-stubs.c
hw/arm: xenpvh: Remove double-negation in warning
hw/arm: xenpvh: Add support for SMP guests
hw/arm: xenpvh: Tweak machine description
hw/arm: xenpvh: Update file header to use SPDX
MAINTAINERS: Add docs/system/arm/xenpvh.rst
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
projects / qemu-xen.git / log