Erik Skultety [Wed, 28 Jun 2017 12:34:41 +0000 (14:34 +0200)]
nodedev: udev: Convert udevEventHandleThread to an actual thread routine
Adjust udevEventHandleThread to be a proper thread routine running in an
infinite loop handling devices. The handler thread pulls all available
data from the udev monitor and only then waits until a wakeup signal for
new incoming data has been emitted by udevEventHandleCallback.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Erik Skultety [Wed, 28 Jun 2017 12:20:37 +0000 (14:20 +0200)]
nodedev: udev: Split udevEventHandleCallback in two functions
This patch splits udevEventHandleCallback in two (introduces
udevEventHandleThread) in order to be later able to refactor the latter
to actually become a normal thread which will wait some time for the
kernel to create the whole sysfs tree for a device as we cannot do that
in the event loop directly.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Erik Skultety [Wed, 18 Oct 2017 12:58:51 +0000 (14:58 +0200)]
nodedev: udev: Unlock the private data before setting up 'system' node
udevSetupSystemDev only needs the udev data lock to be locked because of
calling udevGetDMIData which accesses some protected structure members,
but it can do that on its own just fine, no need to hold the lock the
whole time.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Erik Skultety [Wed, 18 Oct 2017 10:51:40 +0000 (12:51 +0200)]
nodedev: udev: Remove driver locks from stateInitialize and stateCleanup
The driver locks are unnecessary here, since currently the cleanup is
only called from the main daemon thread, so we can't race here. Moreover
@devs and @privateData are self-lockable objects, so no problem there
either.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Erik Skultety [Fri, 6 Oct 2017 13:21:55 +0000 (15:21 +0200)]
nodedev: udev: Convert udev private data to a lockable object
Since there's going to be a worker thread which needs to have some data
protected by a lock, the whole code would just simply get unnecessary
complex, since two sets of locks would be necessary, driver lock (for
udev monitor and event handle) and a mutex protecting thread-local data.
Given the future thread will need to access the udev monitor socket as
well, why not protect everything with a single lock, even better, by
converting the driver's private data to a lockable object, we get the
automatic object disposal feature for free.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Erik Skultety [Wed, 26 Jul 2017 13:16:09 +0000 (15:16 +0200)]
nodedev: udev: Introduce udevEventMonitorSanityCheck helper function
We need to perform a sanity check on the udev monitor before every
use so that we know nothing has changed in the meantime. The reason for
moving the code to a separate helper is to enhance readability and shift
the focus on the important stuff within the udevEventHandleCallback
handler.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Erik Skultety [Mon, 16 Oct 2017 09:53:33 +0000 (11:53 +0200)]
nodedev: Move privileged flag from udev private data to driver's state
Even though hal doesn't make use of it, the privileged flag is related
to the daemon/driver rather than the backend actually used.
While at it, get rid of some tab indentation in the driver state struct.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
There were a bunch of commentary blocks that were literally useless in
terms of describing what the code following them does, since most of
them were documenting "the obvious" or it just wouldn't help at all.
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Erik Skultety [Tue, 17 Oct 2017 15:05:47 +0000 (17:05 +0200)]
maint: Replace tabs with spaces in all source files in repo
So we have a syntax-check rule to catch all tab indents but it naturally
can't catch tab spacing, i.e. as a delimiter. This patch is a result of
running 'vim -en +retab +wq'
(using tabstop=8 softtabstop=4 shiftwidth=4 expandtab) on each file from
a list generated by the following:
find . -regextype gnu-awk \
-regex ".*\.(rng|syms|html|s?[ch]|py|pl|php(\.code)?)(\.in)?" \
| xargs git grep -lP "\t"
Signed-off-by: Erik Skultety <eskultet@redhat.com>
Peter Krempa [Tue, 26 Sep 2017 11:52:43 +0000 (13:52 +0200)]
util: storagefile: Track whether a virStorageSource was auto-detected
When formatting an inactive or migratable XML we will need to suppress
backing chain members which were detected from the disk to keep
semantics straight. This means we need to record, whether a
virStorageSource originates from autodetection.
Peter Krempa [Tue, 10 Oct 2017 06:23:12 +0000 (08:23 +0200)]
qemu: command: Separate wrapping of disk backend props to 'file' object
The file object is needed when formatting the command line, but it makes
nesting of the objects less easy for use with blockdev. Separate the
wrapping into the 'file' object into a helper used specifically for disk
sources in the old code path.
Jiri Denemark [Tue, 10 Oct 2017 11:32:22 +0000 (13:32 +0200)]
cputest: Update Xeon-E7-8890 data
Without the fix in the previous patch the JSON data from QEMU would be
interpreted as Haswell-noTSX because x86DataFilterTSX would filter rtm
and hle features as a result of
family == 6 && model == 63 && stepping < 4
test even though this CPU has stepping == 4.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Jiri Denemark [Tue, 10 Oct 2017 11:34:28 +0000 (13:34 +0200)]
qemu: Parse CPU stepping from query-cpu-model-expansion
Even though only family and model are used for matching CPUID data with
CPU models from cpu_map.xml, stepping is used by x86DataFilterTSX which
is supposed to disable TSX on CPU models with broken TSX support. Thus
we need to start parsing stepping from QEMU to make sure we don't
disable TSX on CPUs which provide working TSX implementation. See the
following patch for a real world example of such CPU.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
If same boot order is specified twice (or more) in domain xml
we call free for uninitiaziled loadparm on cleanup in virDomainDeviceBootParseXML
and SIGABRT (or similar) as a result.
Jiri Denemark [Fri, 6 Oct 2017 12:49:07 +0000 (14:49 +0200)]
qemu: Fix CPU model broken by older libvirt
When libvirt older than 3.9.0 reconnected to a running domain started by
old libvirt it could have messed up the expansion of host-model by
adding features QEMU does not support (such as cmt). Thus whenever we
reconnect to a running domain, revert to an active snapshot, or restore
a saved domain we need to check the guest CPU model and remove the
CPU features unknown to QEMU. We can do this because we know the domain
was successfully started, which means the CPU did not contain the
features when libvirt started the domain.
Jiri Denemark [Fri, 6 Oct 2017 11:23:36 +0000 (13:23 +0200)]
qemu: Filter CPU features when using host CPU
When reconnecting to a domain started with a host-model CPU which was
started by old libvirt that did not replace host-model with the real CPU
definition, libvirt replaces the host-model CPU with the CPU from
capabilities (because this is what the old libvirt did when it started
the domain). Without this patch libvirt could use features unknown to
QEMU in the CPU definition which replaced the original host-model CPU.
Such domain would keep running just fine, but any attempt to migrate it
will fail and once the domain is saved or snapshotted, restoring it
would fail too.
In other words whenever we want to use the CPU definition from host
capabilities as a guest CPU definition, we have to filter the unknown
features.
Jiri Denemark [Thu, 12 Oct 2017 13:19:19 +0000 (15:19 +0200)]
qemu: Check QEMU error on failed migration
When migration fails, QEMU may provide a description of the error in
the reply to query-migrate QMP command. We can fetch this error and use
it instead of the generic "unexpectedly failed" message.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Ján Tomko [Tue, 17 Oct 2017 07:16:52 +0000 (09:16 +0200)]
docs: remove duplicate https links
Commit e371b3b changed all the links to libvirt.org to use https.
Remove the leftover 'http' links from downloads page, since they
point to https anyway.
Peter Krempa [Thu, 12 Oct 2017 17:13:44 +0000 (19:13 +0200)]
Terminate backing chains explicitly
Express a properly terminated backing chain by putting a
virStorageSource of type VIR_STORAGE_TYPE_NONE in the chain. The newly
used helpers simplify this greatly.
The change fixes a bug as formatting an incomplete backing chain and
parsing it back would end up in expressing a terminated chain since
src->backingStoreRaw was not populated. By relying on the terminator
object this can be now processed appropriately.
Peter Krempa [Thu, 12 Oct 2017 17:27:40 +0000 (19:27 +0200)]
util: storagefile: Add helpers to check presence of backing store
Add helpers that will simplify checking if a backing file is valid or
whether it has backing store. The helper virStorageSourceIsBacking
returns true if the given virStorageSource is a valid backing store
member. virStorageSourceHasBacking returns true if the virStorageSource
has a backing store child.
Adding these functions creates a central points for further refactors.
Peter Krempa [Thu, 12 Oct 2017 18:31:33 +0000 (20:31 +0200)]
storage: Fill in 'type' field for virStorageSource in storage driver
Storage driver uses virStorageSource only partially to store it's
configuration but fully when parsing backing files of storage volumes.
This patch sets the 'type' field to a value other than
VIR_STORAGE_TYPE_NONE so that further patches can add a terminator
element to backing chains without breaking iteration.
Peter Krempa [Fri, 6 Oct 2017 11:35:24 +0000 (13:35 +0200)]
util: storage: Store backing chain index in virStorageSource
The backing store indexes were not bound to the storage sources in any
way. To allow us to bind a given alias to a given storage source we need
to save the index in virStorageSource. The backing store ids are now
generated when detecting the backing chain.
Since we don't re-detect the backing chain after snapshots, the
numbering needs to be fixed there.
Peter Krempa [Tue, 26 Sep 2017 12:00:57 +0000 (14:00 +0200)]
conf: Make backing store index optional
Index will remain an internal property even if we allow backing store
parsing from the XML, so we need to allow backing store without it in
the schema.
Existing qemuParseCommandLineMem() will parse "-m 4G" format string.
This patch allows it to parse "-m size=8126464k,slots=32,maxmem=33554432k"
format along with existing format. And adds a testcase to validate the changes.
Ladi Prosek [Fri, 6 Oct 2017 06:47:35 +0000 (08:47 +0200)]
hyperv: Map Limit to max_memory and VirtualQuantity to cur_balloon
Hyper-V uses its own specific memory management so no mapping is going to
be perfect. However, it is more correct to map Limit to max_memory (it
really is the upper limit of what the VM may potentially use) and keep
cur_balloon equal to total_memory.
The typical value returned from Hyper-V in Limit is 1 TiB, which is not
really going to work if interpreted as "startup memory" to be ballooned
away later.
Ladi Prosek [Fri, 6 Oct 2017 06:47:34 +0000 (08:47 +0200)]
hyperv: Escape WQL queries
The code was vulnerable to SQL injection. Likely not a security issue due to
WMI SQL and other constraints but still lame. For example:
virsh # dominfo \"
error: failed to get domain '"'
error: internal error: SOAP fault during enumeration: code 's:Sender', subcode
'n:CannotProcessFilter', reason 'The data source could not process the filter.
The filter might be missing or it might be invalid. Change the filter and try
the request again. ', detail 'The WS-Management service cannot process the
request. The WQL query is invalid. '
This commit fixes the Hyper-V driver by escaping all WMI SQL string parameters.
The same command with the fix:
virsh # dominfo \"
error: failed to get domain '"'
error: Domain not found: No domain with name "
Ladi Prosek [Fri, 6 Oct 2017 06:47:33 +0000 (08:47 +0200)]
hyperv: Fix hypervInitConnection error reporting
"%s is not a Hyper-V server" is not a correct generalization of all possible
error conditions of hypervEnumAndPull. For example:
$ virsh --connect hyperv://localhost/?transport=http
Enter username for localhost [administrator]:
Enter administrator's password for localhost: <enters incorrect password>
error: failed to connect to the hypervisor
error: internal error: localhost is not a Hyper-V server
This commit removes the general virReportError from hypervInitConnection and
also the "Invalid query" virReportError from hypervSerializeEprParam, which
does not correctly describe the error either (virBufferCheckError has
already set a meaningful error message at that point).
The same scenario with the fix:
$ virsh --connect hyperv://localhost/?transport=http
Enter username for localhost [administrator]:
Enter administrator's password for localhost: <enters incorrect password>
error: failed to connect to the hypervisor
error: internal error: Transport error during enumeration: User, password or
similar was not accepted (26)
qemu: ensure TLS clients always verify the server certificate
The default_tls_x509_verify (and related) parameters in qemu.conf
control whether the QEMU TLS servers request & verify certificates
from clients. This works as a simple access control system for
servers by requiring the CA to issue certs to permitted clients.
This use of client certificates is disabled by default, since it
requires extra work to issue client certificates.
Unfortunately the code was using this configuration parameter when
setting up both TLS clients and servers in QEMU. The result was that
TLS clients for character devices and disk devices had verification
turned off, meaning they would ignore errors while validating the
server certificate.
This allows for trivial MITM attacks between client and server,
as any certificate returned by the attacker will be accepted by
the client.
Ján Tomko [Tue, 26 Sep 2017 10:35:29 +0000 (12:35 +0200)]
qemu: reserve PCI addresses for implicit i440fx devices
Somewhere around commit 9ff9d9f reserving entire PCI slots was
eliminated, as demonstrated by commit 6cc2014.
Reserve the functions required by the implicit devices:
00:01.0 ISA Bridge
00:01.1 IDE Controller
00:01.2 USB Controller (unless USB is disabled)
00:01.3 Bridge
cputest: Add query-cpu-definitions reply for Xeon-E7-4830
This CPU was incorrectly detected as SandyBridge before because the
number of additional <feature> elements was the same for both
SandyBridge and Westmere CPU models, but SandyBridge is newer (the CPU
signature does not help here because it doesn't match any signature
defined in cpu_map.xml). But since QEMU's version of SandyBridge CPU
model contains xsaveopt which needs to be disabled, Westmere becomes the
best CPU model when translating CPUID data to virCPUDef. Unfortunately,
this doesn't help with translating the data we got from QEMU and the CPU
model is still computed as SandyBridge in this case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
When testing cpuDecode for computing guest CPU definition from CPUID
data (the CPU definition reported by domain capabilities), we need to
use CPU models (and their usability blockers) from QEMU if they are
available to cpuDecode in the same way it is actually used in the qemu
driver.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
cputest: Print correct feature in virCPUUpdateLive test
If the actual result does not match our expectation, the tests would
not correctly show the difference if a CPU feature is disabled in the
expected result and the actual result does not mention it at all. The
test could complain about an unrelated CPU feature or it could even
crash in case the actual result contains no more features to go through.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
cputest: Avoid calling json_reformat in cpu-parse.sh
Various version of json_reformat use different number of spaces for
indenting. Let's use a simple python reformatter to gain full control
over the formatting for consistent results.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Jiri Denemark [Fri, 13 Oct 2017 16:17:52 +0000 (18:17 +0200)]
cpu_x86: Disable blockers from unusable CPU models
When decoding CPUID data to virCPUDef we need to be careful about using
a CPU model which cannot be directly used on the current host. Normally,
libvirt would notice the features which prevent the model from being
usable and it would disable them in the computed virCPUDef, but this
won't work in case the definition of the CPU model in QEMU contains more
features than what we have in cpu_map.xml. We need to count with the
usability blockers we got from QEMU and explicitly disable all of them
to make the computed virCPUDef usable.
cpu: Use virDomainCapsCPUModelsPtr in cpu driver APIs
All APIs which expect a list of CPU models supported by hypervisors were
switched from char **models and int models to just accept a pointer to
virDomainCapsCPUModels object stored in domain capabilities. This avoids
the need to transform virDomainCapsCPUModelsPtr into a NULL-terminated
list of model names and also allows the various cpu driver APIs to
access additional details (such as its usability) about each CPU model.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
query-cpu-definitions QMP command returns a list of unavailable features
which prevent CPU models from being usable on the current host. So far
we only checked whether the list was empty to mark CPU models as
(un)usable. This patch parses all unavailable features for each CPU
model and stores them in virDomainCapsCPUModel as a list of usability
blockers.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
conf: Add usability blockers to virDomainCapsCPUModel
When a hypervisor marks a CPU model as unusable on the current host, it
may also give us a list of features which prevent the model from being
usable. Storing this list in virDomainCapsCPUModel will help the CPU
driver with creating a host-model CPU configuration.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
virDomainDeviceInfoParseXML: Separate address parsing into separate func
There's one 'return' in the middle of the function body. It's
very easy to miss and so it makes adding new code harder. Also
the function doesn't follow our style 100%.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
In 0d3d020ba6c4f I've added capability to accept MAC addresses
for the API too. However, the implementation was faulty. It needs
to lookup the corresponding interface in the domain definition
and pass the ifname instead of MAC address.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
John Ferlan [Tue, 10 Oct 2017 13:04:54 +0000 (09:04 -0400)]
nodedev: Fix missing network devices
Commit id '8708ca01c' added a check to determine whether the NIC had
Switchdev capabilities; however, in doing so inadvertently would cause
network devices without a PCI device to not be added to the node device
database. Thus, network devices having a "computer" as a parent, such
as "net_lo*", "net_virbr*", "net_tun*", "net_vnet*", etc. were not added.
Alter the check to not even check for Switchdev bits if no PCI device found.
virsh: Deal with multiple matching devices in domif-getlink
The command tries to match interface in domain definition by MAC
address or interface name. However, since it's possible to
configure two interfaces with the same MAC address, it may
happen that the XPath returns two or more nodes. We should check
for that.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
The current implementation reads the stats from the host.
However, this doesn't work for all types of interfaces as not all
of them have a representation in the host. For instance,
interface type='user' doesn't.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Chao Fan [Mon, 9 Oct 2017 02:00:03 +0000 (10:00 +0800)]
qemu: add the print of page size in cmd domjobinfo
The command "info migrate" of qemu outputs the dirty-pages-rate during
migration, but page size is different in different architectures. So
page size should be output to calculate dirty pages in bytes.
Andrea Bolognani [Tue, 10 Oct 2017 13:53:53 +0000 (15:53 +0200)]
qemu: Don't crash when parsing command line lacking -M
Parse the -M (or -machine) command line option before starting
processing in earnest and have a fallback ready in case it's not
present, so that while parsing other options we can rely on
def->os.machine being initialized.
Marc Hartmayer [Mon, 9 Oct 2017 19:14:58 +0000 (21:14 +0200)]
lxc: Fixed indentation
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Marc Hartmayer [Mon, 9 Oct 2017 19:14:57 +0000 (21:14 +0200)]
lxc: Fixed a typo
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Fixes: 0980764dee68 ("util: share code between virExec and virCommandExec") Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com>
Jim Fehlig [Fri, 6 Oct 2017 20:20:36 +0000 (14:20 -0600)]
apparmor: add dnsmasq ptrace rule to libvirtd profile
Commit b482925c added ptrace rule for the apparmor profiles,
but one was missed in the libvirtd profile for dnsmasq. It was
overlooked since the test machine did not have an active libvirt
network requiring dnsmasq that was also set to autostart. With
one active and set to autostart, the following denial is observed
in audit.log when restarting libvirtd
With an active network, I suspect a libvirtd restart causes access
to /proc/<dnsmasq-pid>/*, hence the resulting denial. As a nasty
side affect of the denial, libvirtd thinks it needs to spawn a
dnsmasq process even though one is already running for the network.
E.g. after two libvirtd restarts
Wim ten Have [Fri, 8 Sep 2017 14:47:14 +0000 (16:47 +0200)]
numa: rename function virDomainNumaDefCPUFormat
Rename virDomainNumaDefCPUFormat to virDomainNumaDefCPUFormatXML,
matching its peer virDomainNumaDefCPUParseXML and the general
vir*{Format,Parse}XML conventions.
Signed-off-by: Wim ten Have <wim.ten.have@oracle.com> Reviewed-by: Jim Fehlig <jfehlig@suse.com>
Wim ten Have [Fri, 6 Oct 2017 12:16:07 +0000 (14:16 +0200)]
build: isolate core libvirt libs deps from xen runtime
Generating libvirt packages per make rpm, "with-libxl=1" and "with-xen=1",
adds strict runtime dependencies per libxenlight for xen-libs package from
core libvirt-libs package. This is not necessary and unfortunate since
those dependencies set demand to "xen-libs" package even when there's no
need for libvirt xen or libxl driver components.
This patch is to have two separate xenconfig lib tool libraries: one for
core libvirt (without XL), and a another that contains xl for libxl driver
(libvirt_driver_libxl_impl.la) which when loading the driver, loads the
remaining symbols (xen{Format,Parse}XL. For the user/sysadmin, this means
the xen dependencies are moved into libxl driver, instead of core libvirt.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com> Signed-off-by: Wim ten Have <wim.ten.have@oracle.com> Reviewed-by: Jim Fehlig <jfehlig@suse.com>
projects / libvirt.git / log