Mark Brown [Mon, 24 Apr 2023 11:59:47 +0000 (12:59 +0100)]
Tegra TPM driver with HW flow control
Merge series from Krishna Yarlagadda <kyarlagadda@nvidia.com>:
TPM devices may insert wait state on last clock cycle of ADDR phase.
For SPI controllers that support full-duplex transfers, this can be
detected using software by reading the MISO line. For SPI controllers
that only support half-duplex transfers, such as the Tegra QSPI, it is
not possible to detect the wait signal from software. The QSPI
controller in Tegra234 and Tegra241 implement hardware detection of the
wait signal which can be enabled in the controller for TPM devices.
Add a flag for this in the SPI core and implement support in the Tegra
QuadSPI driver.
Trusted Platform Module requires flow control. As defined in TPM
interface specification, client would drive MISO line at same cycle as
last address bit on MOSI.
Tegra234 and Tegra241 QSPI controllers have TPM wait state detection
feature which is enabled for TPM client devices reported in SPI device
mode bits.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Link: https://lore.kernel.org/r/20230421091309.2672-4-kyarlagadda@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
TPM specification [1] defines flow control over SPI. Client device can
insert a wait state on MISO when address is transmitted by controller
on MOSI. Detecting the wait state in software is only possible for
full duplex controllers. For controllers that support only half-
duplex, the wait state detection needs to be implemented in hardware.
Add a flag SPI_TPM_HW_FLOW for TPM device to set when software flow
control is not possible and hardware flow control is expected from
SPI controller.
spi: bcm63xx: remove PM_SLEEP based conditional compilation
Get rid of conditional compilation based on CONFIG_PM_SLEEP because
it may introduce build issues with certain configs where it maybe disabled
This is because if above config is not enabled the suspend-resume
functions are never part of the code but the bcm63xx_spi_pm_ops struct
still inits them to non-existent suspend-resume functions.
Also get rid of conditional compilation based on CONFIG_PM_SLEEP because
it introduces build issues with certain configs when CQSPI_DEV_PM_OPS is
just NULL.
Currently SPI Cadence controller works only in Master mode.
Updated interrupt handler for Full duplex transfer in Slave mode.
Interrupt handler rely on the TX empty interrupt even for Slave mode
transfer due to below HW limitation.
HW limitation:
AR 65885 - SPI Controller Might Not Update RX_NEMPTY Flag, Showing
Incorrect Status Of The Receive FIFO
SPI Slave mode works in the following manner:
1. One transfer can be finished only after all transfer->len
data been transferred to master device.
2. Slave device only accepts transfer->len data. Any data longer
than this from master device will be dropped. Any data shorter than
this from master will cause SPI to be stuck due to the above behavior.
3. The stale data present in RXFIFO will be dropped in unprepared
hardware transfer function.
spi: spi-cadence: Switch to spi_controller structure
Replace spi_master structure with spi_controller structure.
spi_controller structure provides interface support for
both SPI master and slave controller.
The cadence QSPI driver misbehaves after performing a full system suspend
resume:
...
spi-nor spi0.0: resume() failed
...
This results in a flash connected via OSPI interface after system suspend-
resume to be unusable.
fix these suspend and resume functions.
Mark Brown [Mon, 17 Apr 2023 19:27:00 +0000 (20:27 +0100)]
spi: cadence-quadspi: Fix random issues with Xilinx
Merge series from Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>:
Update Xilinx Versal external DMA read logic to fix random issues
- Instead of having the fixed timeout, update the read timeout based on
the length of the transfer to avoid timeout for larger data size.
- While switching between external DMA read and indirect read, disable the
SPI before configuration and enable it after configuration as recommended
by Octal-SPI Flash Controller specification.
Sai Krishna Potthuri (2):
spi: cadence-quadspi: Update the read timeout based on the length
spi: cadence-quadspi: Disable the SPI before reconfiguring
The AMD Pensando Elba SoC includes a DW apb_ssi v4 controller
with device specific chip-select control. The Elba SoC
provides four chip-selects where the native DW IP supports
two chip-selects. The Elba DW_SPI instance has two native
CS signals that are always overridden.
spi: cadence-quadspi: Disable the SPI before reconfiguring
Observed random DMA timeout failures while doing back to back
transfers which involves switching the modes from DMA to NON-DMA.
This issue is observed while testing the OSPI+UBIFS file system test case
where rootfs is mounted from OSPI UBIFS partition.
To avoid this issue, disable the SPI before changing the configuration
from external DMA to NON-DMA and vice versa and reenable it after changing
the configuration.
As per the Cadence Octal SPI design specification, it is recommended to
disable the Octal-SPI enable bit before reconfiguring.
spi: cadence-quadspi: Update the read timeout based on the length
When performing indirect read via external DMA the timeout for
completion is set equal to the read length instead of fixed timeout value.
For reads larger than 500 bytes, the timeout will continue to be
equal to the read length whereas for a small read like the Read Status
Register command, the timeout would be 1 or 2 milliseconds. This is not
enough to cover the overhead needed in setting up DMA, in that case make
sure the timeout is at least 500ms to allow DMA to finish. This solution
is inline with the timeout used for Direct read via DMA.
Rohit Ner [Wed, 12 Apr 2023 20:20:09 +0000 (13:20 -0700)]
spi: spi-loopback-test: Add module param for iteration length
SPI test framework is designed to run each test case for
a list of lengths.
Introduce a module parameter to limit the iterations
to a single value among the list of lengths.
Mark Brown [Wed, 5 Apr 2023 13:42:24 +0000 (14:42 +0100)]
spi: mchp-pci1xxxx: Fix minor bugs in spi-pci1xxxx
Merge series from Tharun Kumar P <tharunkumar.pasumarthi@microchip.com>:
This patch series fixes the following bugs in spi-pci1xxxx driver:
1. Length of SPI transactions is improper
2. SPI transactions fail after suspend and resume
3. Incorrect implementation of pci1xxxx_spi_set_cs API
spi: fsl-cpm: Use 16 bit mode for large transfers with even size
On CPM, the RISC core is a lot more efficiant when doing transfers
in 16-bits chunks than in 8-bits chunks, but unfortunately the
words need to be byte swapped as seen in a previous commit.
So, for large tranfers with an even size, allocate a temporary tx
buffer and byte-swap data before and after transfer.
This change allows setting higher speed for transfer. For instance
on an MPC 8xx (CPM1 comms RISC processor), the documentation tells
that transfer in byte mode at 1 kbit/s uses 0.200% of CPM load
at 25 MHz while a word transfer at the same speed uses 0.032%
of CPM load. This means the speed can be 6 times higher in
word mode for the same CPM load.
For the time being, only do it on CPM1 as there must be a
trade-off between the CPM load reduction and the CPU load required
to byte swap the data.
spi: fsl-spi: Re-organise transfer bits_per_word adaptation
For different reasons, fsl-spi driver performs bits_per_word
modifications for different reasons:
- On CPU mode, to minimise amount of interrupts
- On CPM/QE mode to work around controller byte order
For CPU mode that's done in fsl_spi_prepare_message() while
for CPM mode that's done in fsl_spi_setup_transfer().
Reunify all of it in fsl_spi_prepare_message(), and catch
impossible cases early through master's bits_per_word_mask
instead of returning EINVAL later.
CPM has the same problem as QE so for CPM also use the fix added
by commit 0398fb70940e ("spi/spi_mpc8xxx: Fix QE mode Litte Endian"):
CPM mode uses Little Endian so words > 8 bits are byte swapped.
Workaround this by always enforcing wordsize 8 for 16 and 32 bits
words. Unfortunately this will not work for LSB transfers
where wordsize is > 8 bits so disable these for now.
Also limit the workaround to 16 and 32 bits words because it can
only work for multiples of 8-bits.
spi: mchp-pci1xxxx: Fix SPI transactions not working after suspend and resume
pci1xxxx_spi_resume API masks SPI interrupt bit which prohibits interrupt
from coming to the host at the end of the transaction after suspend-resume.
This patch unmasks this bit at resume.
spi: mchp-pci1xxxx: Fix length of SPI transactions not set properly in driver
In pci1xxxx_spi_transfer_one API, length of SPI transaction gets cleared
by setting of length mask. Set length of transaction only after masking
length field.
Mark Brown [Tue, 4 Apr 2023 15:40:21 +0000 (16:40 +0100)]
spi: qup: Convert to platform remove callback
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
After fixing the error handling in the .remove() callback of the qup
driver, convert it to .remove_new() preparing to make platform driver's
remove functions return void.
Uwe Kleine-König [Thu, 30 Mar 2023 21:03:41 +0000 (23:03 +0200)]
spi: qup: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Yang Li [Tue, 28 Mar 2023 06:10:31 +0000 (14:10 +0800)]
spi: tegra210-quad: Use devm_platform_get_and_ioremap_resource()
According to commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Yang Li [Tue, 28 Mar 2023 06:10:30 +0000 (14:10 +0800)]
spi: tegra114: Use devm_platform_get_and_ioremap_resource()
According to commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Yang Li [Tue, 28 Mar 2023 06:18:39 +0000 (14:18 +0800)]
spi: stm32: Use devm_platform_get_and_ioremap_resource()
According to commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Yang Li [Tue, 28 Mar 2023 06:26:00 +0000 (14:26 +0800)]
spi: imx: Use devm_platform_get_and_ioremap_resource()
According to commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Kevin Groeneveld [Sat, 18 Mar 2023 22:21:32 +0000 (18:21 -0400)]
spi: spi-imx: fix MX51_ECSPI_* macros when cs > 3
When using gpio based chip select the cs value can go outside the range
0 – 3. The various MX51_ECSPI_* macros did not take this into consideration
resulting in possible corruption of the configuration.
For example for any cs value over 3 the SCLKPHA bits would not be set and
other values in the register possibly corrupted.
One way to fix this is to just mask the cs bits to 2 bits. This still
allows all 4 native chip selects to work as well as gpio chip selects
(which can use any of the 4 chip select configurations).
Uwe Kleine-König [Thu, 30 Mar 2023 21:03:40 +0000 (23:03 +0200)]
spi: qup: Don't skip cleanup in remove's error path
Returning early in a platform driver's remove callback is wrong. In this
case the dma resources are not released in the error path. this is never
retried later and so this is a permanent leak. To fix this, only skip
hardware disabling if waking the device fails.
Uwe Kleine-König [Thu, 30 Mar 2023 21:10:22 +0000 (23:10 +0200)]
spi: bcm2835: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Convert this driver from always returning zero in the remove callback to
the void returning variant.
Now that bcm2835_spi_remove returns no error code any more,
bcm2835_spi_shutdown() does the same thing as bcm2835_spi_remove(). So
drop the shutdown function and use bcm2835_spi_remove() as .shutdown
callback.
Yang Li [Wed, 29 Mar 2023 06:24:50 +0000 (14:24 +0800)]
spi: rockchip-sfc: Use devm_platform_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource(), as this is exactly what this
function does.
Yang Li [Tue, 28 Mar 2023 06:15:24 +0000 (14:15 +0800)]
spi: xilinx: Use devm_platform_get_and_ioremap_resource()
According to commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Douglas Anderson [Thu, 23 Mar 2023 17:30:09 +0000 (10:30 -0700)]
spi: spi-qcom-qspi: Support pinctrl sleep states
It's fairly common practice for drivers to switch to a "sleep" pinctrl
state at the end of its runtime_suspend function and then back to
"default" at the beginning of runtime_resume. Let's do that for
spi-qcom-qspi.
Yang Li [Mon, 27 Mar 2023 06:05:16 +0000 (14:05 +0800)]
spi: sprd: Use devm_platform_get_and_ioremap_resource()
According to commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Yang Li [Mon, 27 Mar 2023 06:05:15 +0000 (14:05 +0800)]
spi: sprd-adi: Use devm_platform_get_and_ioremap_resource()
According to commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Yang Li [Mon, 27 Mar 2023 05:53:46 +0000 (13:53 +0800)]
spi: pic32: Use devm_platform_get_and_ioremap_resource()
According to commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Yang Li [Mon, 27 Mar 2023 05:53:45 +0000 (13:53 +0800)]
spi: orion: Use devm_platform_get_and_ioremap_resource()
According to commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Yang Li [Mon, 27 Mar 2023 05:53:44 +0000 (13:53 +0800)]
spi: omap2-mcspi: Use devm_platform_get_and_ioremap_resource()
According to commit 890cc39a8799 ("drivers: provide
devm_platform_get_and_ioremap_resource()"), convert
platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
The .supports_op() callback function returns true by default after
performing driver-specific checks. Therefore the driver cannot apply
the buswidth in devicetree.
Call spi_mem_default_supports_op() helper to handle the buswidth
in devicetree.
Haibo Chen [Wed, 22 Mar 2023 09:04:50 +0000 (17:04 +0800)]
spi: spi-nxp-fspi: correct the comment for the DLL config
Current DLL config is just to use the default setting, this means
enable the DLL override mode, and use 1 fixed delay cell in the
DLL delay chain, not means "reset" the DLL, so correct this to
avoid confuse.
Mark Brown [Mon, 20 Mar 2023 18:50:05 +0000 (18:50 +0000)]
spi: sprd: Convert to platform remove callback
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
An early error return from a remove callback is usally wrong. In the
case of the spi-sprd driver it's not that critical because the skipped
steps are mainly undoing the things that a successful runtime-resume
would have done.
Still it's cleaner to not exit early and not return an (mostly ignored)
error value. The second patch converts to .remove_new (which is the
motivation for this series).
Mark Brown [Mon, 20 Mar 2023 18:49:58 +0000 (18:49 +0000)]
spi: imx: Fix cleanup in remove and convert to
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
This small series converts the spi-imx driver to .remove_new(). The
motivation for this tree-wide effort are drivers that don't properly
cleanup and return an error code. This is broken as this results in
resource leaks. The spi-imx driver is such a driver. The idea is that if
the remove callback returns void it's obvious that an early error return
is wrong.
Make "clocks" and "power-domains" required everywhere.
Make "resets" required on R-Car Gen2 and newer (i.e. all but SH-Mobile).
Update the example to match reality:
- Use interrupt binding definitions instead of hardcoded numbers,
- Convert to new-style CPG/MSSR bindings,
- Add missing "power-domains" and "resets" properties.
spi: imx: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
spi: imx: Don't skip cleanup in remove's error path
Returning early in a platform driver's remove callback is wrong. In this
case the dma resources are not released in the error path. this is never
retried later and so this is a permanent leak. To fix this, only skip
hardware disabling if waking the device fails.
spi: sprd: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
spi: sprd: Don't skip cleanup in remove's error path
If pm_runtime_resume_and_get() failed before this change, two error
messages were printed. One directly in sprd_spi_remove() and another
by the device core as the return value is non-zero.
The better handling of a failure to resume the device is to do the
software related cleanup anyhow and only skip hardware accesses.
This leaves the device in an unknown state, but there is nothing that can
be done about that.
Even in the error case, return zero to suppress the device core's error
message.
Mark Brown [Fri, 17 Mar 2023 17:43:18 +0000 (17:43 +0000)]
spi: atmel-quadspi: Convert to platform remove
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>:
This series converts the atmel-quadspi driver to use the .remove_new()
callback that doesn't return an int but void. The motivation is to not
give driver authors a reason to (wrongly) believe that returning an
error code was sensible error handling. In fact the spi core only emits
a warning message in this case and otherwise continues as if the return
value was zero. This usually yields resource leaks that sometimes can
lead to exceptions later on.
The atmel-quadspi driver is one of these drivers that got error handling
wrong, this is fixed here and in the last patch the driver is converted
to .remove_new() with the eventual goal to change .remove() to return
void once all drivers are converted this way.
Uwe Kleine-König [Fri, 17 Mar 2023 08:42:32 +0000 (09:42 +0100)]
spi: atmel-quadspi: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Uwe Kleine-König [Fri, 17 Mar 2023 08:42:31 +0000 (09:42 +0100)]
spi: atmel-quadspi: Free resources even if runtime resume failed in .remove()
An early error exit in atmel_qspi_remove() doesn't prevent the device
unbind. So this results in an spi controller with an unbound parent
and unmapped register space (because devm_ioremap_resource() is undone).
So using the remaining spi controller probably results in an oops.
Instead unregister the controller unconditionally and only skip hardware
access and clk disable.
Also add a warning about resume failing and return zero unconditionally.
The latter has the only effect to suppress a less helpful error message by
the spi core.
Leonard Göhrs [Fri, 10 Mar 2023 09:20:53 +0000 (10:20 +0100)]
spi: stm32: split large transfers based on word size instead of bytes
The TSIZE register in CR2, to which the number of words to transfer
is written, is only 16 Bit. This limits transfers to 65535 SPI
_words_ at a time. The existing code uses spi_split_transfers_maxsize
to limit transfers to 65535 _bytes_ at a time.
This breaks large transfers with bits_per_word > 8, as they are
split inside of a word boundary by the odd size limit.
Split transfers based on the number of words instead.
This has the added benefit of not artificially limiting the maximum
length of bpw > 8 transfers to half or a quarter of the actual limit.
The combination of very large transfers and bits_per_word = 16 is triggered
e.g. by MIPI DBI displays when updating large parts of the screen.
Leonard Göhrs [Fri, 10 Mar 2023 09:20:52 +0000 (10:20 +0100)]
spi: core: add spi_split_transfers_maxwords
Add spi_split_transfers_maxwords() function that splits
spi_transfers transparently into multiple transfers
that are below a given number of SPI words.
This function reuses most of its code from
spi_split_transfers_maxsize() and for transfers with
eight or less bits per word actually behaves the same.
Lukas Bulwahn [Tue, 14 Mar 2023 07:56:09 +0000 (08:56 +0100)]
spi: docs: adjust summary to CONFIG_SYSFS_DEPRECATED removal
With commit 721da5cee9d4 ("driver core: remove CONFIG_SYSFS_DEPRECATED and
CONFIG_SYSFS_DEPRECATED_V2"), ./scripts/checkkconfigsymbols.py indicated
an unresolved reference to the config SYSFS_DEPRECATED in the SPI summary
documentation.
Simply, delete the sentence referring to the removed config there. Also
update the documentation, as these sys/class entries should always be
symlinks, as the commit message of the commit above suggests.
Mark Brown [Mon, 13 Mar 2023 18:19:31 +0000 (18:19 +0000)]
spi: struct spi_device constification
Merge series from Geert Uytterhoeven <geert+renesas@glider.be>:
After noticing new cases of casting away constness, I went over all
spi_get_*() functions and their callers, and made the following changes:
1. Make all pointer parameters const where possible,
2. Remove unneeded casts, some not even related to constness.
Driver can match via ID or OF ID table, thus several OF-related methods
will be unused. Mark the OF structures as __maybe_unused so compiler
can drop them:
drivers/spi/spi-rspi.c:1203:29: error: ‘qspi_ops’ defined but not used [-Werror=unused-const-variable=]
The "spi" parameter of spi_get_drvdata() can be const.
dev_get_drvdata() has been taking a const pointer since commit 7d1d8999b4bec0ba ("i2c: Constify i2c_get_clientdata's parameter").
Linus Torvalds [Sun, 12 Mar 2023 23:15:36 +0000 (16:15 -0700)]
Merge tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two additional bug fixes for v6.3"
* tag 'tpm-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: disable hwrng for fTPM on some AMD designs
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
AMD has issued an advisory indicating that having fTPM enabled in
BIOS can cause "stuttering" in the OS. This issue has been fixed
in newer versions of the fTPM firmware, but it's up to system
designers to decide whether to distribute it.
This issue has existed for a while, but is more prevalent starting
with kernel 6.1 because commit b006c439d58db ("hwrng: core - start
hwrng kthread also for untrusted sources") started to use the fTPM
for hwrng by default. However, all uses of /dev/hwrng result in
unacceptable stuttering.
So, simply disable registration of the defective hwrng when detecting
these faulty fTPM versions. As this is caused by faulty firmware, it
is plausible that such a problem could also be reproduced by other TPM
interactions, but this hasn't been shown by any user's testing or reports.
It is hypothesized to be triggered more frequently by the use of the RNG
because userspace software will fetch random numbers regularly.
Intentionally continue to register other TPM functionality so that users
that rely upon PCR measurements or any storage of data will still have
access to it. If it's found later that another TPM functionality is
exacerbating this problem a module parameter it can be turned off entirely
and a module parameter can be introduced to allow users who rely upon
fTPM functionality to turn it on even though this problem is present.
Link: https://www.amd.com/en/support/kb/faq/pa-410 Link: https://bugzilla.kernel.org/show_bug.cgi?id=216989 Link: https://lore.kernel.org/all/20230209153120.261904-1-Jason@zx2c4.com/ Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources") Cc: stable@vger.kernel.org Cc: Jarkko Sakkinen <jarkko@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Tested-by: reach622@mailcuk.com Tested-by: Bell <1138267643@qq.com> Co-developed-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Morten Linderud [Wed, 15 Feb 2023 09:25:52 +0000 (10:25 +0100)]
tpm/eventlog: Don't abort tpm_read_log on faulty ACPI address
tpm_read_log_acpi() should return -ENODEV when no eventlog from the ACPI
table is found. If the firmware vendor includes an invalid log address
we are unable to map from the ACPI memory and tpm_read_log() returns -EIO
which would abort discovery of the eventlog.
Change the return value from -EIO to -ENODEV when acpi_os_map_iomem()
fails to map the event log.
The following hardware was used to test this issue:
Framework Laptop (Pre-production)
BIOS: INSYDE Corp, Revision: 3.2
TPM Device: NTC, Firmware Revision: 7.2
Linus Torvalds [Sun, 12 Mar 2023 16:47:08 +0000 (09:47 -0700)]
Merge tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
- Fix a crash if mount time quotacheck fails when there are inodes
queued for garbage collection.
- Fix an off by one error when discarding folios after writeback
failure.
* tag 'xfs-6.3-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix off-by-one-block in xfs_discard_folio()
xfs: quotacheck failure can race with background inode inactivation
Linus Torvalds [Sun, 12 Mar 2023 16:17:30 +0000 (09:17 -0700)]
Merge tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes and removal from Greg KH:
"Here are four small staging driver fixes, and one big staging driver
deletion for 6.3-rc2.
The fixes are:
- rtl8192e driver fixes for where the driver was attempting to
execute various programs directly from the disk for unknown reasons
- rtl8723bs driver fixes for issues found by Hans in testing
The deleted driver is the removal of the r8188eu wireless driver as
now in 6.3-rc1 we have a "real" wifi driver for one that includes
support for many many more devices than this old driver did. So it's
time to remove it as it is no longer needed. The maintainers of this
driver all have acked its removal. Many thanks to them over the years
for working to clean it up and keep it working while the real driver
was being developed.
All of these have been in linux-next this week with no reported
problems"
* tag 'staging-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: r8188eu: delete driver
staging: rtl8723bs: Pass correct parameters to cfg80211_get_bss()
staging: rtl8723bs: Fix key-store index handling
staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh
staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script
Linus Torvalds [Sun, 12 Mar 2023 16:12:03 +0000 (09:12 -0700)]
Merge tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"A single erratum fix for AMD machines:
- Disable XSAVES on AMD Zen1 and Zen2 machines due to an erratum. No
impact to anything as those machines will fallback to XSAVEC which
is equivalent there"
* tag 'x86_urgent_for_v6.3_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Disable XSAVES on AMD family 0x17
Linus Torvalds [Sun, 12 Mar 2023 16:04:28 +0000 (09:04 -0700)]
Merge tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux
Pull clone3 fix from Christian Brauner:
"A simple fix for the clone3() system call.
The CLONE_NEWTIME allows the creation of time namespaces. The flag
reuses a bit from the CSIGNAL bits that are used in the legacy clone()
system call to set the signal that gets sent to the parent after the
child exits.
The clone3() system call doesn't rely on CSIGNAL anymore as it uses a
dedicated .exit_signal field in struct clone_args. So we blocked all
CSIGNAL bits in clone3_args_valid(). When CLONE_NEWTIME was introduced
and reused a CSIGNAL bit we forgot to adapt clone3_args_valid()
causing CLONE_NEWTIME with clone3() to be rejected. Fix this"
* tag 'kernel.fork.v6.3-rc2' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
selftests/clone3: test clone3 with CLONE_NEWTIME
fork: allow CLONE_NEWTIME in clone3 flags
Linus Torvalds [Sun, 12 Mar 2023 16:00:54 +0000 (09:00 -0700)]
Merge tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull vfs fixes from Christian Brauner:
- When allocating pages for a watch queue failed, we didn't return an
error causing userspace to proceed even though all subsequent
notifcations would be lost. Make sure to return an error.
- Fix a misformed tree entry for the idmapping maintainers entry.
- When setting file leases from an idmapped mount via
generic_setlease() we need to take the idmapping into account
otherwise taking a lease would fail from an idmapped mount.
- Remove two redundant assignments, one in splice code and the other in
locks code, that static checkers complained about.
* tag 'vfs.misc.v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
filelocks: use mount idmapping for setlease permission check
fs/locks: Remove redundant assignment to cmd
splice: Remove redundant assignment to ret
MAINTAINERS: repair a malformed T: entry in IDMAPPED MOUNTS
watch_queue: fix IOC_WATCH_QUEUE_SET_SIZE alloc error paths
Linus Torvalds [Sun, 12 Mar 2023 15:55:55 +0000 (08:55 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes and regressions for ext4, the most serious of which is a
potential deadlock during directory renames that was introduced during
the merge window discovered by a combination of syzbot and lockdep"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: zero i_disksize when initializing the bootloader inode
ext4: make sure fs error flag setted before clear journal error
ext4: commit super block if fs record error when journal record without error
ext4, jbd2: add an optimized bmap for the journal inode
ext4: fix WARNING in ext4_update_inline_data
ext4: move where set the MAY_INLINE_DATA flag is set
ext4: Fix deadlock during directory rename
ext4: Fix comment about the 64BIT feature
docs: ext4: modify the group desc size to 64
ext4: fix another off-by-one fsmap error on 1k block filesystems
ext4: fix RENAME_WHITEOUT handling for inline directories
ext4: make kobj_type structures constant
ext4: fix cgroup writeback accounting with fs-layer encryption
Linus Torvalds [Sun, 12 Mar 2023 15:52:03 +0000 (08:52 -0700)]
cpumask: relax sanity checking constraints
The cpumask_check() was unnecessarily tight, and causes problems for the
users of cpumask_next().
We have a number of users that take the previous return value of one of
the bit scanning functions and subtract one to keep it in "range". But
since the scanning functions end up returning up to 'small_cpumask_bits'
instead of the tighter 'nr_cpumask_bits', the range really needs to be
using that widened form.
[ This "previous-1" behavior is also the reason we have all those
comments about /* -1 is a legal arg here. */ and separate checks for
that being ok. So we could have just made "small_cpumask_bits-1"
be a similar special "don't check this" value.
Tetsuo Handa even suggested a patch that only does that for
cpumask_next(), since that seems to be the only actual case that
triggers, but that all makes it even _more_ magical and special. So
just relax the check ]
One example of this kind of pattern being the 'c_start()' function in
arch/x86/kernel/cpu/proc.c, but also duplicated in various forms on
other architectures.
Mark Brown [Sat, 11 Mar 2023 21:15:24 +0000 (21:15 +0000)]
Add support for stacked/parallel memories
Merge series from Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>:
This patch is in the continuation to the discussions which happened on
'commit f89504300e94 ("spi: Stacked/parallel memories bindings")' for
adding dt-binding support for stacked/parallel memories.
This patch series updated the spi-nor, spi core and the spi drivers
to add stacked and parallel memories support.
The first patch
https://lore.kernel.org/all/20230119185342.2093323-1-amit.kumar-mahapatra@amd.com/
of the previous series got applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
But the rest of the patches in the series did not get applied due to merge
conflict, so send the remaining patches in the series after rebasing it
on top of for-next branch.
---
BRANCH: for-next
Changes in v6:
- Rebased on top of latest v6.3-rc1 and fixed merge conflicts in
spi-mpc512x-psc.c, sfdp.c, spansion.c files and removed spi-omap-100k.c.
- Updated spi_dev_check( ) to reject new devices if any one of the
chipselect is used by another device.
Changes in v5:
- Rebased the patches on top of v6.3-rc1 and fixed the merge conflicts.
- Fixed compilation warnings in spi-sh-msiof.c with shmobile_defconfig
Changes in v4:
- Fixed build error in spi-pl022.c file - reported by Mark.
- Fixed build error in spi-sn-f-ospi.c file.
- Added Reviewed-by: Serge Semin <fancer.lancer@gmail.com> tag.
- Added two more patches to replace spi->chip_select with API calls in
mpc832x_rdb.c & cs35l41_hda_spi.c files.
Changes in v3:
- Rebased the patches on top of
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
- Added a patch to convert spi_nor_otp_region_len(nor) &
spi_nor_otp_n_regions(nor) macros into inline functions
- Added Reviewed-by & Acked-by tags
Changes in v2:
- Rebased the patches on top of v6.2-rc1
- Created separate patch to add get & set APIs for spi->chip_select &
spi->cs_gpiod, and replaced all spi->chip_select and spi->cs_gpiod
references with the API calls.
- Created separate patch to add get & set APIs for nor->params.
---
Amit Kumar Mahapatra (15):
spi: Replace all spi->chip_select and spi->cs_gpiod references with
function call
net: Replace all spi->chip_select and spi->cs_gpiod references with
function call
iio: imu: Replace all spi->chip_select and spi->cs_gpiod references
with function call
mtd: devices: Replace all spi->chip_select and spi->cs_gpiod
references with function call
staging: Replace all spi->chip_select and spi->cs_gpiod references
with function call
platform/x86: serial-multi-instantiate: Replace all spi->chip_select
and spi->cs_gpiod references with function call
powerpc/83xx/mpc832x_rdb: Replace all spi->chip_select references with
function call
ALSA: hda: cs35l41: Replace all spi->chip_select references with
function call
spi: Add stacked and parallel memories support in SPI core
mtd: spi-nor: Convert macros with inline functions
mtd: spi-nor: Add APIs to set/get nor->params
mtd: spi-nor: Add stacked memories support in spi-nor
spi: spi-zynqmp-gqspi: Add stacked memories support in GQSPI driver
mtd: spi-nor: Add parallel memories support in spi-nor
spi: spi-zynqmp-gqspi: Add parallel memories support in GQSPI driver
Linus Torvalds [Sat, 11 Mar 2023 17:24:05 +0000 (09:24 -0800)]
Merge tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This marks the end of a transition to let I2C have the same probe
semantics as other subsystems. Uwe took care that no drivers in the
current tree nor in -next use the deprecated .probe call. So, it is a
good time to switch to the new, standard semantics now.
There is also a regression fix:
- regression fix for the notifier handling of the I2C core
- final coversions of drivers away from deprecated .probe
- make .probe_new the standard probe and convert I2C core to use it
* tag 'i2c-for-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: dev: Fix bus callback return values
i2c: Convert drivers to new .probe() callback
i2c: mux: Convert all drivers to new .probe() callback
i2c: Switch .probe() to not take an id parameter
media: i2c: ov2685: convert to i2c's .probe_new()
media: i2c: ov5695: convert to i2c's .probe_new()
w1: ds2482: Convert to i2c's .probe_new()
serial: sc16is7xx: Convert to i2c's .probe_new()
mtd: maps: pismo: Convert to i2c's .probe_new()
misc: ad525x_dpot-i2c: Convert to i2c's .probe_new()
ALSA: hda: cs35l41: Replace all spi->chip_select references with function call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
powerpc/83xx/mpc832x_rdb: Replace all spi->chip_select references with function call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
platform/x86: serial-multi-instantiate: Replace all spi->chip_select and spi->cs_gpiod references with function call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
staging: Replace all spi->chip_select and spi->cs_gpiod references with function call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
mtd: devices: Replace all spi->chip_select and spi->cs_gpiod references with function call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
iio: imu: Replace all spi->chip_select and spi->cs_gpiod references with function call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
net: Replace all spi->chip_select and spi->cs_gpiod references with function call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
spi: Replace all spi->chip_select and spi->cs_gpiod references with function call
Supporting multi-cs in spi drivers would require the chip_select & cs_gpiod
members of struct spi_device to be an array. But changing the type of these
members to array would break the spi driver functionality. To make the
transition smoother introduced four new APIs to get/set the
spi->chip_select & spi->cs_gpiod and replaced all spi->chip_select and
spi->cs_gpiod references with get or set API calls.
While adding multi-cs support in further patches the chip_select & cs_gpiod
members of the spi_device structure would be converted to arrays & the
"idx" parameter of the APIs would be used as array index i.e.,
spi->chip_select[idx] & spi->cs_gpiod[idx] respectively.
Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com> Acked-by: Heiko Stuebner <heiko@sntech.de> # Rockchip drivers Reviewed-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> # Aspeed driver Reviewed-by: Dhruva Gole <d-gole@ti.com> # SPI Cadence QSPI Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> # spi-stm32-qspi Acked-by: William Zhang <william.zhang@broadcom.com> # bcm63xx-hsspi driver Reviewed-by: Serge Semin <fancer.lancer@gmail.com> # DW SSI part Link: https://lore.kernel.org/r/167847070432.26.15076794204368669839@mailman-core.alsa-project.org Signed-off-by: Mark Brown <broonie@kernel.org>
projects / people / pauldu / linux.git / log