hw/sd/sdcard: Update coding style to make checkpatch.pl happy
To make the next commit easier to review, clean this code first.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200630133912.9428-3-f4bug@amsat.org>
(cherry picked from commit 794d68de2f021a6d3874df41d6bbe8590ec05207) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
QEMU allows to create SD card with unrealistic sizes. This could
work, but some guests (at least Linux) consider sizes that are not
a power of 2 as a firmware bug and fix the card size to the next
power of 2.
While the possibility to use small SD card images has been seen as
a feature, it became a bug with CVE-2020-13253, where the guest is
able to do OOB read/write accesses past the image size end.
In a pair of commits we will fix CVE-2020-13253 as:
Read command is rejected if BLOCK_LEN_ERROR or ADDRESS_ERROR
occurred and no data transfer is performed.
Write command is rejected if BLOCK_LEN_ERROR or ADDRESS_ERROR
occurred and no data transfer is performed.
WP_VIOLATION errors are not modified: the error bit is set, we
stay in receive-data state, wait for a stop command. All further
data transfer is ignored. See the check on sd->card_status at the
beginning of sd_read_data() and sd_write_data().
While this is the correct behavior, in case QEMU create smaller SD
cards, guests still try to access past the image size end, and QEMU
considers this is an invalid address, thus "all further data transfer
is ignored". This is wrong and make the guest looping until
eventually timeouts.
Fix by not allowing invalid SD card sizes (suggesting the expected
size as a hint):
$ qemu-system-arm -M orangepi-pc -drive file=rootfs.ext2,if=sd,format=raw
qemu-system-arm: Invalid SD card size: 60 MiB
SD card size has to be a power of 2, e.g. 64 MiB.
You can resize disk images with 'qemu-img resize <imagefile> <new-size>'
(note that this will lose data if you make the image smaller than it currently is).
Cc: qemu-stable@nongnu.org Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200713183209.26308-8-f4bug@amsat.org>
(cherry picked from commit a9bcedd15a5834ca9ae6c3a97933e85ac7edbd36) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630133912.9428-18-f4bug@amsat.org>
(cherry picked from commit 6dd3a164f5b31c703c7d8372841ad3bd6a57de6d) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
hw/sd/sdcard: Restrict Class 6 commands to SCSD cards
Only SCSD cards support Class 6 (Block Oriented Write Protection)
commands.
"SD Specifications Part 1 Physical Layer Simplified Spec. v3.01"
4.3.14 Command Functional Difference in Card Capacity Types
* Write Protected Group
SDHC and SDXC do not support write-protected groups. Issuing
CMD28, CMD29 and CMD30 generates the ILLEGAL_COMMAND error.
Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630133912.9428-7-f4bug@amsat.org>
(cherry picked from commit 9157dd597d293ab7f599f4d96c3fe8a6e07c633d) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
tests/acceptance/boot_linux: Expand SD card image to power of 2
In few commits we won't allow SD card images with invalid size
(not aligned to a power of 2). Prepare the tests: add the
pow2ceil() and image_pow2ceil_expand() methods and resize the
images (expanding) of the tests using SD cards.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200713183209.26308-5-f4bug@amsat.org>
(cherry picked from commit 6a289a5ba3383e17fb47029720425bef42e424d7) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:04:44 +0000 (10:04 +0300)]
tests/acceptance: refactor boot_linux_console test to allow code reuse
This patch splits code in BootLinuxConsole class into two different
classes to allow reusing it by record/replay tests.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073588490.20809.13942096070255577558.stgit@pasha-ThinkPad-X280> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
(cherry picked from commit 12121c496fcc609e23033c4a36399b54f98bcd56) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:05:31 +0000 (10:05 +0300)]
tests/acceptance: refactor boot_linux to allow code reuse
This patch moves image downloading functions to the separate class to allow
reusing them from record/replay tests.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073593167.20809.17582679291556188984.stgit@pasha-ThinkPad-X280> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
(cherry picked from commit 1c80c87c8c2489e4318c93c844aa29bc1d014146) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Pavel Dovgalyuk [Fri, 29 May 2020 07:04:39 +0000 (10:04 +0300)]
tests/acceptance: allow console interaction with specific VMs
Console interaction in avocado scripts was possible only with single
default VM.
This patch modifies the function parameters to allow passing a specific
VM as a parameter to interact with it.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <159073587933.20809.5122618715976660635.stgit@pasha-ThinkPad-X280> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
(cherry picked from commit a5ba86d423c2b071894d86c60487f2317c7ffb60) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Cleber Rosa <crosa@redhat.com> Tested-by: Cleber Rosa <crosa@redhat.com>
Message-Id: <20200713183209.26308-4-f4bug@amsat.org>
(cherry picked from commit b7dcbf1395da960ec3c313300dc0030674de8cd1) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
docs/orangepi: Add instructions for resizing SD image to power of two
SD cards need to have a size of a power of two.
Update the Orange Pi machine documentation to include
instructions for resizing downloaded images using the
qemu-img command.
Signed-off-by: Niek Linnenbank <nieklinnenbank@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200712183708.15450-1-nieklinnenbank@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
(cherry picked from commit 1c2329b5d644bad16e888d095e2021ad682201d9) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Michal Privoznik [Mon, 22 Jun 2020 18:19:36 +0000 (20:19 +0200)]
qga: Use qemu_get_host_name() instead of g_get_host_name()
Problem with g_get_host_name() is that on the first call it saves
the hostname into a global variable and from then on, every
subsequent call returns the saved hostname. Even if the hostname
changes. This doesn't play nicely with guest agent, because if
the hostname is acquired before the guest is set up (e.g. on the
first boot, or before DHCP) we will report old, invalid hostname.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1845127 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit 0d3a8f32b1e0eca279da1b0cc793efc7250c3daf) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Michal Privoznik [Mon, 22 Jun 2020 18:19:35 +0000 (20:19 +0200)]
util: Introduce qemu_get_host_name()
This function offers operating system agnostic way to fetch host
name. It is implemented for both POSIX-like and Windows systems.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit e47f4765afcab2b78dfa5b0115abf64d1d49a5d3) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Since commit 781f2b3d1e ("qga: process_event() simplification"),
send_response() is called unconditionally, but will assert when "rsp" is
NULL. This may happen with QCO_NO_SUCCESS_RESP commands, such as
"guest-shutdown".
Fixes: 781f2b3d1e5ef389b44016a897fd55e7a780bf35 Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit 844bd70b5652f30bbace89499f513e3fbbb6457a) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Eric Blake [Mon, 22 Jun 2020 21:03:55 +0000 (16:03 -0500)]
nbd: Avoid off-by-one in long export name truncation
When snprintf returns the same value as the buffer size, the final
byte was truncated to ensure a NUL terminator. Fortunately, such long
export names are unusual enough, with no real impact other than what
is displayed to the user.
Fixes: 5c86bdf12089 Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200622210355.414941-1-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit 00d69986da83a74f6f5731c80f8dd09fde95d19a) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
usb/dev-mtp: Fix Error double free after inotify failure
error_report_err() frees its first argument. Freeing it again is
wrong. Don't.
Fixes: 47287c27d0c367a89f7b2851e23a7f8b2d499dd6 Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel P. Berrangé <berrange@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-7-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
(cherry picked from commit 562a558647be6fe43e60f8bf3601e5b6122c0599) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
One of the replaced messages lacked a colon. Add it.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200505101908.6207-6-armbru@redhat.com>
(cherry picked from commit 5217f1887a8041c51495fbd5d3f767d96a242000) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
net/virtio: Fix failover_replug_primary() return value regression
Commit 150ab54aa6 "net/virtio: fix re-plugging of primary device"
fixed failover_replug_primary() to return false on failure. Commit 5a0948d36c "net/virtio: Fix failover error handling crash bugs" broke
it again for hotplug_handler_plug() failure. Unbreak it.
Max Reitz [Mon, 8 Jun 2020 09:31:11 +0000 (11:31 +0200)]
virtiofsd: Whitelist fchmod
lo_setattr() invokes fchmod() in a rarely used code path, so it should
be whitelisted or virtiofsd will crash with EBADSYS.
Said code path can be triggered for example as follows:
On the host, in the shared directory, create a file with the sticky bit
set and a security.capability xattr:
(1) # touch foo
(2) # chmod u+s foo
(3) # setcap '' foo
Then in the guest let some process truncate that file after it has
dropped all of its capabilities (at least CAP_FSETID):
This will cause the guest kernel to drop the sticky bit (i.e. perform a
mode change) as part of the truncate (where FATTR_FH is set), and that
will cause virtiofsd to invoke fchmod() instead of fchmodat().
(A similar configuration exists further below with futimens() vs.
utimensat(), but the former is not a syscall but just a wrapper for the
latter, so no further whitelisting is required.)
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1842667 Reported-by: Qian Cai <caiqian@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200608093111.14942-1-mreitz@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(cherry picked from commit 63659fe74e76f5c5285466f0c5cfbdca65b3688e) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2813 static void
2814 e1000e_set_psrctl(E1000ECore *core, int index, uint32_t val)
2815 {
2816 if (core->mac[RCTL] & E1000_RCTL_DTYP_MASK) {
2817
2818 if ((val & E1000_PSRCTL_BSIZE0_MASK) == 0) {
2819 hw_error("e1000e: PSRCTL.BSIZE0 cannot be zero");
2820 }
Instead of calling hw_error() which abort the process (it is
meant for CPU fatal error condition, not for device logging),
log the invalid request with qemu_log_mask(LOG_GUEST_ERROR)
and return, ignoring the request.
Cc: qemu-stable@nongnu.org Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit fda43b1204aecd1db158b3255c591d227fbdd629) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 5d971f9e6725 ("memory: Revert "memory: accept mismatching sizes
in memory_region_access_valid") broke the artist driver in a way that
the dtwm window manager on HP-UX rendered wrong.
Fixes: 5d971f9e6725 ("memory: Revert "memory: accept mismatching sizes in memory_region_access_valid") Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de>
(cherry picked from commit e0cf02ce680f11893aca9642e76d6ae68b9375af) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Michael Tokarev [Mon, 20 Jul 2020 16:06:27 +0000 (19:06 +0300)]
acpi: accept byte and word access to core ACPI registers
All ISA registers should be accessible as bytes, words or dwords
(if wide enough). Fix the access constraints for acpi-pm-evt,
acpi-pm-tmr & acpi-cnt registers.
xhci: fix valid.max_access_size to access address registers
QEMU XHCI advertises AC64 (64-bit addressing) but doesn't allow
64-bit mode access in "runtime" and "operational" MemoryRegionOps.
Set the max_access_size based on sizeof(dma_addr_t) as AC64 is set.
XHCI specs:
"If the xHC supports 64-bit addressing (AC64 = ‘1’), then software
should write 64-bit registers using only Qword accesses. If a
system is incapable of issuing Qword accesses, then writes to the
64-bit address fields shall be performed using 2 Dword accesses;
low Dword-first, high-Dword second. If the xHC supports 32-bit
addressing (AC64 = ‘0’), then the high Dword of registers containing
64-bit address fields are unused and software should write addresses
using only Dword accesses"
The problem has been detected with SLOF, as linux kernel always accesses
registers using 32-bit access even if AC64 is set and revealed by 5d971f9e6725 ("memory: Revert "memory: accept mismatching sizes in memory_region_access_valid"")
Alistair Francis [Tue, 30 Jun 2020 20:12:11 +0000 (13:12 -0700)]
hw/riscv: Allow 64 bit access to SiFive CLINT
Commit 5d971f9e672507210e77d020d89e0e89165c8fc9
"memory: Revert "memory: accept mismatching sizes in
memory_region_access_valid"" broke most RISC-V boards as they do 64 bit
accesses to the CLINT and QEMU would trigger a fault. Fix this failure
by allowing 8 byte accesses.
memory: Revert "memory: accept mismatching sizes in memory_region_access_valid"
Memory API documentation documents valid .min_access_size and .max_access_size
fields and explains that any access outside these boundaries is blocked.
This is what devices seem to assume.
However this is not what the implementation does: it simply
ignores the boundaries unless there's an "accepts" callback.
Naturally, this breaks a bunch of devices.
Revert to the documented behaviour.
Devices that want to allow any access can just drop the valid field,
or add the impl field to have accesses converted to appropriate
length.
Cc: qemu-stable@nongnu.org Reviewed-by: Richard Henderson <rth@twiddle.net> Fixes: CVE-2020-13754 Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1842363 Fixes: a014ed07bd5a ("memory: accept mismatching sizes in memory_region_access_valid") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200610134731.1514409-1-mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 5d971f9e672507210e77d020d89e0e89165c8fc9) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Paolo Bonzini [Tue, 23 Jun 2020 16:17:59 +0000 (12:17 -0400)]
libqos: pci-pc: use 32-bit write for EJ register
The memory region ops have min_access_size == 4 so obey it.
Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 4b7c06837ae0b1ff56473202a42e7e386f53d6db) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Paolo Bonzini [Tue, 23 Jun 2020 16:18:24 +0000 (12:18 -0400)]
libqos: usb-hcd-ehci: use 32-bit write for config register
The memory region ops have min_access_size == 4 so obey it.
Tested-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 89ed83d8b23c11d250c290593cad3ca839d5b053) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Stefan Hajnoczi [Mon, 11 May 2020 18:36:30 +0000 (19:36 +0100)]
aio-posix: disable fdmon-io_uring when GSource is used
The glib event loop does not call fdmon_io_uring_wait() so fd handlers
waiting to be submitted build up in the list. There is no benefit is
using io_uring when the glib GSource is being used, so disable it
instead of implementing a more complex fix.
This fixes a memory leak where AioHandlers would build up and increasing
amounts of CPU time were spent iterating them in aio_pending(). The
symptom is that guests become slow when QEMU is built with io_uring
support.
Buglink: https://bugs.launchpad.net/qemu/+bug/1877716 Fixes: 73fd282e7b6dd4e4ea1c3bbb3d302c8db51e4ccf ("aio-posix: add io_uring fd monitoring implementation") Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Message-id: 20200511183630.279750-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit ba607ca8bff4d2c2062902f8355657c865ac7c29) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Stefan Hajnoczi [Mon, 11 May 2020 18:36:29 +0000 (19:36 +0100)]
aio-posix: don't duplicate fd handler deletion in fdmon_io_uring_destroy()
The io_uring file descriptor monitoring implementation has an internal
list of fd handlers that are pending submission to io_uring.
fdmon_io_uring_destroy() deletes all fd handlers on the list.
Don't delete fd handlers directly in fdmon_io_uring_destroy() for two
reasons:
1. This duplicates the aio-posix.c AioHandler deletion code and could
become outdated if the struct changes.
2. Only handlers with the FDMON_IO_URING_REMOVE flag set are safe to
remove. If the flag is not set then something still has a pointer to
the fd handler. Let aio-posix.c and its user worry about that. In
practice this isn't an issue because fdmon_io_uring_destroy() is only
called when shutting down so all users have removed their fd
handlers, but the next patch will need this!
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Tested-by: Oleksandr Natalenko <oleksandr@redhat.com>
Message-id: 20200511183630.279750-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit de137e44f75d9868f5b548638081850f6ac771f2) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Paolo Bonzini [Tue, 30 Jun 2020 13:49:27 +0000 (09:49 -0400)]
KVM: x86: believe what KVM says about WAITPKG
Currently, QEMU is overriding KVM_GET_SUPPORTED_CPUID's answer for
the WAITPKG bit depending on the "-overcommit cpu-pm" setting. This is a
bad idea because it does not even check if the host supports it, but it
can be done in x86_cpu_realizefn just like we do for the MONITOR bit.
This patch moves it there, while making it conditional on host
support for the related UMWAIT MSR.
Cc: qemu-stable@nongnu.org Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit e1e43813e7908b063938a3d01f172f88f6190c80) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Jason Wang [Mon, 11 May 2020 04:04:53 +0000 (12:04 +0800)]
net: use peer when purging queue in qemu_flush_or_purge_queue_packets()
The sender of packet will be checked in the qemu_net_queue_purge() but
we use NetClientState not its peer when trying to purge the incoming
queue in qemu_flush_or_purge_packets(). This will trigger the assert
in virtio_net_reset since we can't pass the sender check:
hw/net/virtio-net.c:533: void virtio_net_reset(VirtIODevice *): Assertion
`!virtio_net_get_subqueue(nc)->async_tx.elem' failed.
#9 0x55a33fa31b78 in virtio_net_reset hw/net/virtio-net.c:533:13
#10 0x55a33fc88412 in virtio_reset hw/virtio/virtio.c:1919:9
#11 0x55a341d82764 in virtio_bus_reset hw/virtio/virtio-bus.c:95:9
#12 0x55a341dba2de in virtio_pci_reset hw/virtio/virtio-pci.c:1824:5
#13 0x55a341db3e02 in virtio_pci_common_write hw/virtio/virtio-pci.c:1252:13
#14 0x55a33f62117b in memory_region_write_accessor memory.c:496:5
#15 0x55a33f6205e4 in access_with_adjusted_size memory.c:557:18
#16 0x55a33f61e177 in memory_region_dispatch_write memory.c:1488:16
Reported-by: "Alexander Bulekov" <alxndr@bu.edu> Acked-by: Alexander Bulekov <alxndr@bu.edu> Fixes: ca77d85e1dbf9 ("net: complete all queued packets on VM stop") Cc: qemu-stable@nongnu.org Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit 5fe19fb81839ea42b592b409f725349cf3c73551) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Stefan Hajnoczi [Fri, 1 May 2020 14:06:44 +0000 (15:06 +0100)]
virtiofsd: stay below fs.file-max sysctl value (CVE-2020-10717)
The system-wide fs.file-max sysctl value determines how many files can
be open. It defaults to a value calculated based on the machine's RAM
size. Previously virtiofsd would try to set RLIMIT_NOFILE to 1,000,000
and this allowed the FUSE client to exhaust the number of open files
system-wide on Linux hosts with less than 10 GB of RAM!
Take fs.file-max into account when choosing the default RLIMIT_NOFILE
value.
Fixes: CVE-2020-10717 Reported-by: Yuval Avrahami <yavrahami@paloaltonetworks.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200501140644.220940-3-stefanha@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(cherry picked from commit 8c1d353d107b4fc344e27f2f08ea7fa25de2eea2) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Stefan Hajnoczi [Fri, 1 May 2020 14:06:43 +0000 (15:06 +0100)]
virtiofsd: add --rlimit-nofile=NUM option
Make it possible to specify the RLIMIT_NOFILE on the command-line.
Users running multiple virtiofsd processes should allocate a certain
number to each process so that the system-wide limit can never be
exhausted.
When this option is set to 0 the rlimit is left at its current value.
This is useful when a management tool wants to configure the rlimit
itself.
The default behavior remains unchanged: try to set the limit to
1,000,000 file descriptors if the current rlimit is lower.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200501140644.220940-2-stefanha@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
(cherry picked from commit 6dbb716877728ce4eb51619885ef6ef4ada9565f) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Kevin Wolf [Thu, 30 Apr 2020 14:27:52 +0000 (16:27 +0200)]
iotests/283: Use consistent size for source and target
The test case forgot to specify the null-co size for the target node.
When adding a check to backup that both sizes match, this would fail
because of the size mismatch and not the behaviour that the test really
wanted to test.
Fixes: a541fcc27c98b96da187c7d4573f3270f3ddd283 Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200430142755.315494-2-kwolf@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 813cc2545b82409fd504509f0ba2e96fab6edb9e) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The tulip network driver in a qemu-system-hppa emulation is broken in
the sense that bigger network packages aren't received any longer and
thus even running e.g. "apt update" inside the VM fails.
The breakage was introduced by commit 8ffb7265af ("check frame size and
r/w data length") which added checks to prevent accesses outside of the
rx/tx buffers.
But the new checks were implemented wrong. The variable rx_frame_len
counts backwards, from rx_frame_size down to zero, and the variable len
is never bigger than rx_frame_len, so accesses just can't happen and the
checks are unnecessary.
On the contrary the checks now prevented bigger packages to be moved
into the rx buffers.
This patch reverts the wrong checks and were sucessfully tested with a
qemu-system-hppa emulation.
Fixes: 8ffb7265af ("check frame size and r/w data length") Buglink: https://bugs.launchpad.net/bugs/1874539 Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Jason Wang <jasowang@redhat.com>
(cherry picked from commit d9b69640391618045949f7c500b87fc129f862ed) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
es1370: check total frame count against current frame
A guest user may set channel frame count via es1370_write()
such that, in es1370_transfer_audio(), total frame count
'size' is lesser than the number of frames that are processed
'cnt'.
int cnt = d->frame_cnt >> 16;
int size = d->frame_cnt & 0xffff;
if (size < cnt), it results in incorrect calculations leading
to OOB access issue(s). Add check to avoid it.
ati-vga: check mm_index before recursive call (CVE-2020-13800)
While accessing VGA registers via ati_mm_read/write routines,
a guest may set 's->regs.mm_index' such that it leads to infinite
recursion. Check mm_index value to avoid such recursion. Log an
error message for wrong values.
Reported-by: Ren Ding <rding@gatech.edu> Reported-by: Hanqing Zhao <hanqing@gatech.edu> Reported-by: Yi Ren <c4tren@gmail.com>
Message-id: 20200604090830.33885-1-ppandit@redhat.com Suggested-by: BALATON Zoltan <balaton@eik.bme.hu> Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit a98610c429d52db0937c1e48659428929835c455) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
xen/9pfs: yield when there isn't enough room on the ring
Instead of truncating replies, which is problematic, wait until the
client reads more data and frees bytes on the reply ring.
Do that by calling qemu_coroutine_yield(). The corresponding
qemu_coroutine_enter_if_inactive() is called from xen_9pfs_bh upon
receiving the next notification from the client.
We need to be careful to avoid races in case xen_9pfs_bh and the
coroutine are both active at the same time. In xen_9pfs_bh, wait until
either the critical section is over (ring->co == NULL) or until the
coroutine becomes inactive (qemu_coroutine_yield() was called) before
continuing. Then, simply wake up the coroutine if it is inactive.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com> Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20200521192627.15259-2-sstabellini@kernel.org> Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit a4c4d462729466c4756bac8a0a8d77eb63b21ef7) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
If delivery of some 9pfs response fails for some reason, log the
error message by mentioning the 9P protocol reply type, not by
client's request type. The latter could be misleading that the
error occurred already when handling the request input.
Dan Robertson [Mon, 25 May 2020 08:38:03 +0000 (10:38 +0200)]
9pfs: include linux/limits.h for XATTR_SIZE_MAX
linux/limits.h should be included for the XATTR_SIZE_MAX definition used
by v9fs_xattrcreate.
Fixes: 3b79ef2cf488 ("9pfs: limit xattr size in xattrcreate") Signed-off-by: Dan Robertson <dan@dlrobertson.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20200515203015.7090-2-dan@dlrobertson.com> Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit 03556ea920b23c466ce7c1283199033de33ee671) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Omar Sandoval [Thu, 14 May 2020 06:06:43 +0000 (08:06 +0200)]
9pfs: local: ignore O_NOATIME if we don't have permissions
QEMU's local 9pfs server passes through O_NOATIME from the client. If
the QEMU process doesn't have permissions to use O_NOATIME (namely, it
does not own the file nor have the CAP_FOWNER capability), the open will
fail. This causes issues when from the client's point of view, it
believes it has permissions to use O_NOATIME (e.g., a process running as
root in the virtual machine). Additionally, overlayfs on Linux opens
files on the lower layer using O_NOATIME, so in this case a 9pfs mount
can't be used as a lower layer for overlayfs (cf.
https://github.com/osandov/drgn/blob/dabfe1971951701da13863dbe6d8a1d172ad9650/vmtest/onoatimehack.c
and https://github.com/NixOS/nixpkgs/issues/54509).
Luckily, O_NOATIME is effectively a hint, and is often ignored by, e.g.,
network filesystems. open(2) notes that O_NOATIME "may not be effective
on all filesystems. One example is NFS, where the server maintains the
access time." This means that we can honor it when possible but fall
back to ignoring it.
Eric Blake [Mon, 8 Jun 2020 18:26:38 +0000 (13:26 -0500)]
block: Call attention to truncation of long NBD exports
Commit 93676c88 relaxed our NBD client code to request export names up
to the NBD protocol maximum of 4096 bytes without NUL terminator, even
though the block layer can't store anything longer than 4096 bytes
including NUL terminator for display to the user. Since this means
there are some export names where we have to truncate things, we can
at least try to make the truncation a bit more obvious for the user.
Note that in spite of the truncated display name, we can still
communicate with an NBD server using such a long export name; this was
deemed nicer than refusing to even connect to such a server (since the
server may not be under our control, and since determining our actual
length limits gets tricky when nbd://host:port/export and
nbd+unix:///export?socket=/path are themselves variable-length
expansions beyond the export name but count towards the block layer
name length).
Reported-by: Xueqiang Wei <xuwei@redhat.com> Fixes: https://bugzilla.redhat.com/1843684 Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200610163741.3745251-3-eblake@redhat.com>
(cherry picked from commit 5c86bdf1208916ece0b87e1151c9b48ee54faa3e) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
virtio-balloon: unref the iothread when unrealizing
We took a reference when realizing, so let's drop that reference when
unrealizing.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Cc: qemu-stable@nongnu.org Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200520100439.19872-4-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 105aef9c9479786d27c1c45c9b0b1fa03dc46be3) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
virtio-balloon: fix free page hinting check on unrealize
Checking against guest features is wrong. We allocated data structures
based on host features. We can rely on "free_page_bh" as an indicator
whether to un-do stuff instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Cc: qemu-stable@nongnu.org Cc: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200520100439.19872-3-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 49b01711b8eb3796c6904c7f85d2431572cfe54f) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Doing a "write 0xc0000e30 0x24
0x030000000300000003000000030000000300000003000000030000000300000003000000"
We will trigger a SEGFAULT. Let's move the check and bail out.
While at it, move the static initializations to instance_init().
free_page_report_status and block_iothread are implicitly set to the
right values (0/false) already, so drop the initialization.
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Fixes: c13c4153f76d ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT") Reported-by: Alexander Bulekov <alxndr@bu.edu> Cc: qemu-stable@nongnu.org Cc: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200520100439.19872-2-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 12fc8903a8ee09fb5f642de82699a0b211e1b5a7) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Eric Blake [Mon, 8 Jun 2020 18:26:37 +0000 (13:26 -0500)]
nbd/server: Avoid long error message assertions CVE-2020-10761
Ever since commit 36683283 (v2.8), the server code asserts that error
strings sent to the client are well-formed per the protocol by not
exceeding the maximum string length of 4096. At the time the server
first started sending error messages, the assertion could not be
triggered, because messages were completely under our control.
However, over the years, we have added latent scenarios where a client
could trigger the server to attempt an error message that would
include the client's information if it passed other checks first:
- requesting NBD_OPT_INFO/GO on an export name that is not present
(commit 0cfae925 in v2.12 echoes the name)
- requesting NBD_OPT_LIST/SET_META_CONTEXT on an export name that is
not present (commit e7b1948d in v2.12 echoes the name)
At the time, those were still safe because we flagged names larger
than 256 bytes with a different message; but that changed in commit 93676c88 (v4.2) when we raised the name limit to 4096 to match the NBD
string limit. (That commit also failed to change the magic number
4096 in nbd_negotiate_send_rep_err to the just-introduced named
constant.) So with that commit, long client names appended to server
text can now trigger the assertion, and thus be used as a denial of
service attack against a server. As a mitigating factor, if the
server requires TLS, the client cannot trigger the problematic paths
unless it first supplies TLS credentials, and such trusted clients are
less likely to try to intentionally crash the server.
We may later want to further sanitize the user-supplied strings we
place into our error messages, such as scrubbing out control
characters, but that is less important to the CVE fix, so it can be a
later patch to the new nbd_sanitize_name.
Consideration was given to changing the assertion in
nbd_negotiate_send_rep_verr to instead merely log a server error and
truncate the message, to avoid leaving a latent path that could
trigger a future CVE DoS on any new error message. However, this
merely complicates the code for something that is already (correctly)
flagging coding errors, and now that we are aware of the long message
pitfall, we are less likely to introduce such errors in the future,
which would make such error handling dead code.
Reported-by: Xueqiang Wei <xuwei@redhat.com> CC: qemu-stable@nongnu.org Fixes: https://bugzilla.redhat.com/1843684 CVE-2020-10761 Fixes: 93676c88d7 Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200610163741.3745251-2-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
(cherry picked from commit 5c4fe018c025740fef4a0a4421e8162db0c3eefd) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Greg Kurz [Mon, 25 May 2020 08:38:03 +0000 (10:38 +0200)]
9p: Lock directory streams with a CoMutex
Locking was introduced in QEMU 2.7 to address the deprecation of
readdir_r(3) in glibc 2.24. It turns out that the frontend code is
the worst place to handle a critical section with a pthread mutex:
the code runs in a coroutine on behalf of the QEMU mainloop and then
yields control, waiting for the fsdev backend to process the request
in a worker thread. If the client resends another readdir request for
the same fid before the previous one finally unlocked the mutex, we're
deadlocked.
This never bit us because the linux client serializes readdir requests
for the same fid, but it is quite easy to demonstrate with a custom
client.
A good solution could be to narrow the critical section in the worker
thread code and to return a copy of the dirent to the frontend, but
this causes quite some changes in both 9p.c and codir.c. So, instead
of that, in order for people to easily backport the fix to older QEMU
versions, let's simply use a CoMutex since all the users for this
sit in coroutines.
Fixes: 7cde47d4a89d ("9p: add locking to V9fsDir") Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <158981894794.109297.3530035833368944254.stgit@bahia.lan> Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit ed463454efd0ac3042ff772bfe1b1d846dc281a5) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Igor Mammedov [Thu, 30 Apr 2020 15:46:06 +0000 (11:46 -0400)]
hostmem: don't use mbind() if host-nodes is empty
Since 5.0 QEMU uses hostmem backend for allocating main guest RAM.
The backend however calls mbind() which is typically NOP
in case of default policy/absent host-nodes bitmap.
However when runing in container with black-listed mbind()
syscall, QEMU fails to start with error
"cannot bind memory to host NUMA nodes: Operation not permitted"
even when user hasn't provided host-nodes to pin to explictly
(which is the case with -m option)
To fix issue, call mbind() only in case when user has provided
host-nodes explicitly (i.e. host_nodes bitmap is not empty).
That should allow to run QEMU in containers with black-listed
mbind() without memory pinning. If QEMU provided memory-pinning
is required user still has to white-list mbind() in container
configuration.
Reported-by: Manuel Hohmann <mhohmann@physnet.uni-hamburg.de> Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200430154606.6421-1-imammedo@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
(cherry picked from commit 70b6d525dfb51d5e523d568d1139fc051bc223c5) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Maydell [Wed, 22 Apr 2020 12:45:01 +0000 (13:45 +0100)]
target/arm: Fix ID_MMFR4 value on AArch64 'max' CPU
In commit 41a4bf1feab098da4cd the added code to set the CNP
field in ID_MMFR4 for the AArch64 'max' CPU had a typo
where it used the wrong variable name, resulting in ID_MMFR4
fields AC2, XNX and LSM being wrong. Fix the typo.
Fixes: 41a4bf1feab098da4cd Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 20200422124501.28015-1-peter.maydell@linaro.org
Peter Maydell [Mon, 20 Apr 2020 18:57:18 +0000 (19:57 +0100)]
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200417' into staging
ppc patch queue for 2020-04-17
Here are a few late bugfixes for qemu-5.0 in the ppc target code.
Unless some really nasty last minute bug shows up, I expect this to be
the last ppc pull request for qemu-5.0.
* remotes/dgibson/tags/ppc-for-5.0-20200417:
target/ppc: Fix mtmsr(d) L=1 variant that loses interrupts
target/ppc: Fix wrong interpretation of the disposition flag.
linux-user/ppc: Fix padding in mcontext_t for ppc64
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
block/iscsi:fix heap-buffer-overflow in iscsi_aio_ioctl_cb
There is an overflow, the source 'datain.data[2]' is 100 bytes,
but the 'ss' is 252 bytes.This may cause a security issue because
we can access a lot of unrelated memory data.
The len for sbp copy data should take the minimum of mx_sb_len and
sb_len_wr, not the maximum.
If we use iscsi device for VM backend storage, ASAN show stack:
READ of size 252 at 0xfffd149dcfc4 thread T0
#0 0xaaad433d0d34 in __asan_memcpy (aarch64-softmmu/qemu-system-aarch64+0x2cb0d34)
#1 0xaaad45f9d6d0 in iscsi_aio_ioctl_cb /qemu/block/iscsi.c:996:9
#2 0xfffd1af0e2dc (/usr/lib64/iscsi/libiscsi.so.8+0xe2dc)
#3 0xfffd1af0d174 (/usr/lib64/iscsi/libiscsi.so.8+0xd174)
#4 0xfffd1af19fac (/usr/lib64/iscsi/libiscsi.so.8+0x19fac)
#5 0xaaad45f9acc8 in iscsi_process_read /qemu/block/iscsi.c:403:5
#6 0xaaad4623733c in aio_dispatch_handler /qemu/util/aio-posix.c:467:9
#7 0xaaad4622f350 in aio_dispatch_handlers /qemu/util/aio-posix.c:510:20
#8 0xaaad4622f350 in aio_dispatch /qemu/util/aio-posix.c:520
#9 0xaaad46215944 in aio_ctx_dispatch /qemu/util/async.c:298:5
#10 0xfffd1bed12f4 in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x512f4)
#11 0xaaad46227de0 in glib_pollfds_poll /qemu/util/main-loop.c:219:9
#12 0xaaad46227de0 in os_host_main_loop_wait /qemu/util/main-loop.c:242
#13 0xaaad46227de0 in main_loop_wait /qemu/util/main-loop.c:518
#14 0xaaad43d9d60c in qemu_main_loop /qemu/softmmu/vl.c:1662:9
#15 0xaaad4607a5b0 in main /qemu/softmmu/main.c:49:5
#16 0xfffd1a460b9c in __libc_start_main (/lib64/libc.so.6+0x20b9c)
#17 0xaaad43320740 in _start (aarch64-softmmu/qemu-system-aarch64+0x2c00740)
0xfffd149dcfc4 is located 0 bytes to the right of 100-byte region [0xfffd149dcf60,0xfffd149dcfc4)
allocated by thread T0 here:
#0 0xaaad433d1e70 in __interceptor_malloc (aarch64-softmmu/qemu-system-aarch64+0x2cb1e70)
#1 0xfffd1af0e254 (/usr/lib64/iscsi/libiscsi.so.8+0xe254)
#2 0xfffd1af0d174 (/usr/lib64/iscsi/libiscsi.so.8+0xd174)
#3 0xfffd1af19fac (/usr/lib64/iscsi/libiscsi.so.8+0x19fac)
#4 0xaaad45f9acc8 in iscsi_process_read /qemu/block/iscsi.c:403:5
#5 0xaaad4623733c in aio_dispatch_handler /qemu/util/aio-posix.c:467:9
#6 0xaaad4622f350 in aio_dispatch_handlers /qemu/util/aio-posix.c:510:20
#7 0xaaad4622f350 in aio_dispatch /qemu/util/aio-posix.c:520
#8 0xaaad46215944 in aio_ctx_dispatch /qemu/util/async.c:298:5
#9 0xfffd1bed12f4 in g_main_context_dispatch (/lib64/libglib-2.0.so.0+0x512f4)
#10 0xaaad46227de0 in glib_pollfds_poll /qemu/util/main-loop.c:219:9
#11 0xaaad46227de0 in os_host_main_loop_wait /qemu/util/main-loop.c:242
#12 0xaaad46227de0 in main_loop_wait /qemu/util/main-loop.c:518
#13 0xaaad43d9d60c in qemu_main_loop /qemu/softmmu/vl.c:1662:9
#14 0xaaad4607a5b0 in main /qemu/softmmu/main.c:49:5
#15 0xfffd1a460b9c in __libc_start_main (/lib64/libc.so.6+0x20b9c)
#16 0xaaad43320740 in _start (aarch64-softmmu/qemu-system-aarch64+0x2c00740)
Reported-by: Euler Robot <euler.robot@huawei.com> Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20200418062602.10776-1-kuhn.chenqun@huawei.com Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
More recently, Linux reduced the occurance of operations (e.g., rfi)
which stop translation and allow pending interrupts to be processed.
This started causing hangs in Linux boot in long-running kernel tests,
running with '-d int' shows the decrementer stops firing despite DEC
wrapping and MSR[EE]=1.
The cause is the broken mtmsr L=1 behaviour, which is contrary to the
architecture. From Power ISA v3.0B, p.977, Move To Machine State Register,
Programming Note states:
If MSR[EE]=0 and an External, Decrementer, or Performance Monitor
exception is pending, executing an mtmsrd instruction that sets
MSR[EE] to 1 will cause the interrupt to occur before the next
instruction is executed, if no higher priority exception exists
Fix this by handling L=1 exactly the same way as L=0, modulo the MSR
bits altered.
The confusion arises from L=0 being "context synchronizing" whereas L=1
is "execution synchronizing", which is a weaker semantic. However this
is not a relaxation of the requirement that these exceptions cause
interrupts when MSR[EE]=1 (e.g., when mtmsr executes to completion as
TCG is doing here), rather it specifies how a pipelined processor can
have multiple instructions in flight where one may influence how another
behaves.
Cc: qemu-stable@nongnu.org Reported-by: Anton Blanchard <anton@ozlabs.org> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200414111131.465560-1-npiggin@gmail.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
target/ppc: Fix wrong interpretation of the disposition flag.
Bitwise AND with kvm_run->flags to evaluate if we recovered from
MCE or not is not correct, As disposition in kvm_run->flags is a
two-bit integer value and not a bit map, So check for equality
instead of bitwise AND.
Without the fix qemu treats any unrecoverable mce error as recoverable
and ends up in a mce loop inside the guest, Below are the MCE logs before
and after the fix.
linux-user/ppc: Fix padding in mcontext_t for ppc64
The padding that was added in 95cda4c44ee was added to a union,
and so it had no effect. This fixes misalignment errors detected
by clang sanitizers for ppc64 and ppc64le.
In addition, only ppc64 allocates space for VSX registers, so do
not save them for ppc32. The kernel only has references to
CONFIG_SPE in signal_32.c, so do not attempt to save them for ppc64.
Fixes: 95cda4c44ee Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200407032105.26711-1-richard.henderson@linaro.org> Acked-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
linux-user/syscall.c: add target-to-host mapping for epoll_create1()
Noticed by Barnabás Virágh as a python-3.7 failue on qemu-alpha.
The bug shows up on alpha as it's one of the targets where
EPOLL_CLOEXEC differs from other targets:
sysdeps/unix/sysv/linux/alpha/bits/epoll.h: EPOLL_CLOEXEC = 01000000
sysdeps/unix/sysv/linux/bits/epoll.h: EPOLL_CLOEXEC = 02000000
* remotes/mdroth/tags/qga-pull-2020-04-15-tag:
qga: Restrict guest-file-read count to 48 MB to avoid crashes
qga: Extract qmp_guest_file_read() to common commands.c
qga: Extract guest_file_handle_find() to commands-common.h
Revert "prevent crash when executing guest-file-read with large count"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qga: Restrict guest-file-read count to 48 MB to avoid crashes
On [*] Daniel Berrangé commented:
The QEMU guest agent protocol is not sensible way to access huge
files inside the guest. It requires the inefficient process of
reading the entire data into memory than duplicating it again in
base64 format, and then copying it again in the JSON serializer /
monitor code.
For arbitrary general purpose file access, especially for large
files, use a real file transfer program or use a network block
device, not the QEMU guest agent.
To avoid bug reports as BZ#1594054 (CVE-2018-12617), follow his
suggestion to put a low, hard limit on "count" in the guest agent
QAPI schema, and don't allow count to be larger than 48 MB.
Fixes: CVE-2018-12617 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1594054 Reported-by: Fakhri Zulkifli <mohdfakhrizulkifli@gmail.com> Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
*update schema documentation to indicate 48MB limit instead of 10MB Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Revert "prevent crash when executing guest-file-read with large count"
As noted by Daniel Berrangé in [*], the fix from commit 807e2b6fce
which replaced malloc() by try_malloc() is not enough, the process
can still run out of memory a few line later:
Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Maydell [Wed, 15 Apr 2020 11:02:59 +0000 (12:02 +0100)]
Merge remote-tracking branch 'remotes/stsquad/tags/pull-more-fixes-150420-1' into staging
More small fixes for rc3
- tweak docker FEATURE flags for document building
- include sphinx configure check in config.log
- disable PIE for Windows builds
- fix /proc/self/stat handling
- a number of gdbstub fixups following GByteArray conversion
# gpg: Signature made Wed 15 Apr 2020 11:38:56 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-more-fixes-150420-1:
gdbstub: Introduce gdb_get_float32() to get 32-bit float registers
gdbstub: Do not use memset() on GByteArray
gdbstub: i386: Fix gdb_get_reg16() parameter to unbreak gdb
target/m68k/helper: Fix m68k_fpu_gdb_get_reg() use of GByteArray
linux-user: fix /proc/self/stat handling
configure: disable PIE for Windows builds
configure: redirect sphinx-build check to config.log
tests/docker: add docs FEATURE flag and use for test-misc
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Alex Bennée [Tue, 14 Apr 2020 20:06:23 +0000 (21:06 +0100)]
linux-user: fix /proc/self/stat handling
In the original bug report long files names in Guix caused
/proc/self/stat be truncated without the trailing ") " as specified in
proc manpage which says:
(2) comm %s
The filename of the executable, in parentheses. This
is visible whether or not the executable is swapped
out.
In the kernel this is currently done by do_task_stat calling
proc_task_name() which uses a structure limited by TASK_COMM_LEN (16).
Additionally it should only be reporting the executable name rather
than the full path. Fix both these failings while cleaning up the code
to use GString to build up the reported values. As the whole function
is cleaned up also adjust the white space to the current coding style.
Message-ID: <fb4c55fa-d539-67ee-c6c9-de8fb63c8488@inria.fr> Reported-by: Brice Goglin <Brice.Goglin@inria.fr> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-10-alex.bennee@linaro.org>
Alex Bennée [Tue, 14 Apr 2020 20:06:21 +0000 (21:06 +0100)]
configure: redirect sphinx-build check to config.log
Otherwise it's hard to debug whats going on.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-8-alex.bennee@linaro.org>
Alex Bennée [Tue, 14 Apr 2020 20:06:20 +0000 (21:06 +0100)]
tests/docker: add docs FEATURE flag and use for test-misc
The test-misc docker test fails on a number of images which don't have
the prerequisites to build the docs. Use the FEATURES flag so we can
skip those tests.
As the sphinx test fails to detect whatever feature we need to get
hxtool to work we drop them from debian9 so the windows build doesn't
attempt to build the docs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200414200631.12799-7-alex.bennee@linaro.org>
* remotes/bonzini/tags/for-upstream:
hax: Windows doesn't like posix device names
tests: numa: test one backend with prealloc enabled
hostmem: set default prealloc_threads to valid value
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 14 Apr 2020 16:27:00 +0000 (17:27 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200414' into staging
patch queue:
* Fix some problems that trip up Coverity's scanner
* run-coverity-scan: New script automating the scan-and-upload process
* docs: Improve our gdbstub documentation
* configure: Honour --disable-werror for Sphinx
* docs: Fix errors produced when building with Sphinx 3.0
* docs: Require Sphinx 1.6 or better
* Add deprecation notice for KVM support on AArch32 hosts
* remotes/pmaydell/tags/pull-target-arm-20200414:
Deprecate KVM support for AArch32
docs: Require Sphinx 1.6 or better
kernel-doc: Use c:struct for Sphinx 3.0 and later
scripts/kernel-doc: Add missing close-paren in c:function directives
configure: Honour --disable-werror for Sphinx
docs: Improve our gdbstub documentation
scripts/coverity-scan: Add Docker support
scripts/run-coverity-scan: Script to run Coverity Scan build
linux-user/flatload.c: Use "" for include of QEMU header target_flat.h
thread.h: Remove trailing semicolons from Coverity qemu_mutex_lock() etc
thread.h: Fix Coverity version of qemu_cond_timedwait()
osdep.h: Drop no-longer-needed Coverity workarounds
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 14 Apr 2020 12:09:35 +0000 (13:09 +0100)]
Deprecate KVM support for AArch32
The Linux kernel has dropped support for allowing 32-bit Arm systems
to host KVM guests (kernel commit 541ad0150ca4aa663a2, which just
landed upstream in the 5.7 merge window). Mark QEMU's support for
this configuration as deprecated, so that we can delete that support
code in 5.2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com>
Peter Maydell [Tue, 14 Apr 2020 12:41:14 +0000 (13:41 +0100)]
docs: Require Sphinx 1.6 or better
Versions of Sphinx older than 1.6 can't build all of our documentation,
because they are too picky about the syntax of the argument to the
option:: directive; see Sphinx bugs #646, #3366:
Trying to build with a 1.4.x Sphinx fails with
docs/system/images.rst:4: SEVERE: Duplicate ID: "cmdoption-qcow2-arg-encrypt"
and a 1.5.x Sphinx fails with
docs/system/invocation.rst:544: WARNING: Malformed option description '[enable=]PATTERN', should look like "opt", "-opt
args", "--opt args", "/opt args" or "+opt args"
Update our needs_sphinx setting to indicate that we require at least
1.6. This will allow configure to fall back to "don't build the
docs" rather than causing the build to fail entirely, which is
probably what most users building on a host old enough to have such
an old Sphinx would want; if they do want the docs then they'll have
a useful indication of what they need to do (upgrade Sphinx!) rather
than a confusing error message.
In theory our distro support policy would suggest that we should
support building on the Sphinx shipped in those distros, but:
* EPEL7 has Sphinx 1.2.3 (which we've never supported!)
* Debian Stretch has Sphinx 1.4.8
Trying to get our docs to work with Sphinx 1.4 is not tractable
for the 5.0 release and I'm not sure it's worthwhile effort anyway;
at least with this change the build as a whole now succeeds.
Thanks to John Snow for doing the investigation and testing to
confirm what Sphinx versions fail in what ways and what distros
shipped what.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Peter Maydell [Tue, 14 Apr 2020 12:50:41 +0000 (13:50 +0100)]
kernel-doc: Use c:struct for Sphinx 3.0 and later
The kernel-doc Sphinx plugin and associated script currently emit
'c:type' directives for "struct foo" documentation.
Sphinx 3.0 warns about this:
/home/petmay01/linaro/qemu-from-laptop/qemu/docs/../include/exec/memory.h:3: WARNING: Type must be either just a name or a typedef-like declaration.
If just a name:
Error in declarator or parameters
Invalid C declaration: Expected identifier in nested name, got keyword: struct [error at 6]
struct MemoryListener
------^
If typedef-like declaration:
Error in declarator or parameters
Invalid C declaration: Expected identifier in nested name. [error at 21]
struct MemoryListener
---------------------^
because it wants us to use the new-in-3.0 'c:struct' instead.
Plumb the Sphinx version through to the kernel-doc script
and use it to select 'c:struct' for newer versions than 3.0.
Fixes: LP:1872113 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Peter Maydell [Sat, 11 Apr 2020 18:29:33 +0000 (19:29 +0100)]
scripts/kernel-doc: Add missing close-paren in c:function directives
When kernel-doc generates a 'c:function' directive for a function
one of whose arguments is a function pointer, it fails to print
the close-paren after the argument list of the function pointer
argument, for instance in the memory API documentation:
.. c:function:: void memory_region_init_resizeable_ram (MemoryRegion * mr, struct Object * owner, const char * name, uint64_t size, uint64_t max_size, void (*resized) (const char*, uint64_t length, void *host, Error ** errp)
which should have a ')' after the 'void *host' which is the
last argument to 'resized'.
Older versions of Sphinx don't try to parse the argumnet
to c:function, but Sphinx 3.0 does do this and will complain:
/home/petmay01/linaro/qemu-from-laptop/qemu/docs/../include/exec/memory.h:834: WARNING: Error in declarator or parameters
Invalid C declaration: Expecting "," or ")" in parameters, got "EOF". [error at 208]
void memory_region_init_resizeable_ram (MemoryRegion * mr, struct Object * owner, const char * name, uint64_t size, uint64_t max_size, void (*resized) (const char*, uint64_t length, void *host, Error ** errp)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------^
Add the missing close-paren.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200411182934.28678-3-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Igor Mammedov [Wed, 25 Mar 2020 09:44:23 +0000 (05:44 -0400)]
tests: numa: test one backend with prealloc enabled
Cannibalize one backend in the HMAT test to make sure that
prealloc=y is tested.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20200325094423.24293-3-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Igor Mammedov [Wed, 25 Mar 2020 09:44:22 +0000 (05:44 -0400)]
hostmem: set default prealloc_threads to valid value
Commit 4ebc74dbbf removed default prealloc_threads initialization
by mistake, and that makes QEMU crash with division on zero at
numpages_per_thread = numpages / memset_num_threads;
when QEMU is started with following backend
-object memory-backend-ram,id=ram-node0,prealloc=yes,size=128M
Return back initialization removed by 4ebc74dbbf to fix issue.
Fixes: 4ebc74dbbf7ad50e4101629f3f5da5fdc1544051 Reported-by: Raphael Norwitz <raphael.norwitz@nutanix.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20200325094423.24293-2-imammedo@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Peter Maydell [Sat, 11 Apr 2020 18:29:32 +0000 (19:29 +0100)]
configure: Honour --disable-werror for Sphinx
If we are not making warnings fatal for compilation, make them
non-fatal when building the Sphinx documentation also. (For instance
Sphinx 3.0 warns about some constructs that older versions were happy
with, which is a build failure if we use the warnings-as-errors
flag.)
This provides a workaround at least for LP:1872113.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200411182934.28678-2-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Peter Maydell [Fri, 3 Apr 2020 09:40:14 +0000 (10:40 +0100)]
docs: Improve our gdbstub documentation
The documentation of our -s and -gdb options is quite old; in
particular it still claims that it will cause QEMU to stop and wait
for the gdb connection, when this has not been true for some time:
you also need to pass -S if you want to make QEMU not launch the
guest on startup.
Improve the documentation to mention this requirement in the
executable's --help output, the documentation of the -gdb option in
the manual, and in the "GDB usage" chapter.
Includes some minor tweaks to these paragraphs of documentation
since I was editing them anyway (such as dropping the description
of our gdb support as "primitive").
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20200403094014.9589-1-peter.maydell@linaro.org
Peter Maydell [Thu, 19 Mar 2020 19:33:23 +0000 (19:33 +0000)]
scripts/coverity-scan: Add Docker support
Add support for running the Coverity Scan tools inside a Docker
container rather than directly on the host system.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200319193323.2038-7-peter.maydell@linaro.org
Peter Maydell [Thu, 19 Mar 2020 19:33:22 +0000 (19:33 +0000)]
scripts/run-coverity-scan: Script to run Coverity Scan build
Add a new script to automate the process of running the Coverity
Scan build tools and uploading the resulting tarball to the
website.
This is intended eventually to be driven from Travis,
but it can be run locally, if you are a maintainer of the
QEMU project on the Coverity Scan website and have the secret
upload token.
The script must be run on a Fedora 30 system. Support for using a
Docker container is added in a following commit.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200319193323.2038-6-peter.maydell@linaro.org
Peter Maydell [Thu, 19 Mar 2020 19:33:21 +0000 (19:33 +0000)]
linux-user/flatload.c: Use "" for include of QEMU header target_flat.h
The target_flat.h file is a QEMU header, so we should include it using
quotes, not angle brackets.
Coverity otherwise is unable to find the header:
"../linux-user/flatload.c", line 40: error #1712: cannot open source file
"target_flat.h"
#include <target_flat.h>
^
because the relevant directory is only on the -iquote path, not the -I path.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200319193323.2038-5-peter.maydell@linaro.org
Peter Maydell [Thu, 19 Mar 2020 19:33:20 +0000 (19:33 +0000)]
thread.h: Remove trailing semicolons from Coverity qemu_mutex_lock() etc
All the Coverity-specific definitions of qemu_mutex_lock() and friends
have a trailing semicolon. This works fine almost everywhere because
of QEMU's mandatory-braces coding style and because most callsites are
simple, but target/s390x/sigp.c has a use of qemu_mutex_trylock() as
an if() statement, which makes the ';' a syntax error:
"../target/s390x/sigp.c", line 461: warning #18: expected a ")"
if (qemu_mutex_trylock(&qemu_sigp_mutex)) {
^
Remove the bogus semicolons from the macro definitions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200319193323.2038-4-peter.maydell@linaro.org
Peter Maydell [Thu, 19 Mar 2020 19:33:19 +0000 (19:33 +0000)]
thread.h: Fix Coverity version of qemu_cond_timedwait()
For Coverity's benefit, we provide simpler versions of functions like
qemu_mutex_lock(), qemu_cond_wait() and qemu_cond_timedwait(). When
we added qemu_cond_timedwait() in commit 3dcc9c6ec4ea, a cut and
paste error meant that the Coverity version of qemu_cond_timedwait()
was using the wrong _impl function, which makes the Coverity parser
complain:
"/qemu/include/qemu/thread.h", line 159: warning #140: too many arguments in
function call
return qemu_cond_timedwait(cond, mutex, ms);
^
"/qemu/include/qemu/thread.h", line 159: warning #120: return value type does
not match the function type
return qemu_cond_timedwait(cond, mutex, ms);
^
"/qemu/include/qemu/thread.h", line 156: warning #1563: function
"qemu_cond_timedwait" not emitted, consider modeling it or review
parse diagnostics to improve fidelity
static inline bool (qemu_cond_timedwait)(QemuCond *cond, QemuMutex *mutex,
^
These aren't fatal, but reduce the scope of the analysis. Fix the error.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200319193323.2038-3-peter.maydell@linaro.org
Peter Maydell [Thu, 19 Mar 2020 19:33:18 +0000 (19:33 +0000)]
osdep.h: Drop no-longer-needed Coverity workarounds
In commit a1a98357e3fd in 2018 we added some workarounds for Coverity
not being able to handle the _Float* types introduced by recent
glibc. Newer versions of the Coverity scan tools have support for
these types, and will fail with errors about duplicate typedefs if we
have our workaround. Remove our copy of the typedefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200319193323.2038-2-peter.maydell@linaro.org
projects / qemu-xen.git / log