Peter Krempa [Mon, 9 May 2022 14:19:49 +0000 (16:19 +0200)]
qemuBuildHostNetProps: Refactor construction of tapfd/vhostfd arguments
Pre-construct the array the same way for the case when there's only one
FD and when there are multiple. We just change the argument name
depending on the count.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 9 May 2022 07:50:51 +0000 (09:50 +0200)]
qemu: domain: Add qemuFDPass helpers into network private data
Prepare for the upcoming refactor to use qemuFDPass for all the network
related file descriptors:
- tapfds
- vhostfds
- slirp
- vdpa
This patch adds the private data variables and a utility function to
clear it. Clearing is useful since we don't really need the data once
the VM is running so we save some memory.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Fri, 6 May 2022 12:50:06 +0000 (14:50 +0200)]
qemu: Clear 'qemuFDPass' helpers of char devices when no longer needed
While the FDs are closed right after use to prevent leaks, at certain
point we don't need the whole helper any more. Clear them for char
devices after hotplug and on start.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Thu, 5 May 2022 13:45:55 +0000 (15:45 +0200)]
qemu: domain: Store and update 'fdsetindex' across libvirtd restarts
While 'add-fd' qmp command gives the possibility to find an unused fdset
ID when hot-adding fdsets, such usage is extremely inconvenient.
This patch allows us to track the used fdset id so that we can avoid the
need to check results and thus employ simpler code flow when hot-adding
devices which use FD passing.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Fri, 6 May 2022 10:55:00 +0000 (12:55 +0200)]
qemuMonitorJSONQueryFdsets: Ensure that JSON arrays are valid before using them
The code didn't check that the reply value is an array and that the
'fds' array is present. This could lead to a crash if qemu wouldn't
return an array in those places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Wed, 4 May 2022 12:12:58 +0000 (14:12 +0200)]
qemu_fd: Remove error checking from qemuFDPassAddFD
It's effectively replaced by checks in qemuFDPassTransfer. This will
simplify cleanup paths on constructing the qemuFDPass object when FDs
are being handled.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Fri, 13 May 2022 07:33:36 +0000 (09:33 +0200)]
virDomainRestoreFlags: Require VIR_DOMAIN_SAVE_PARAM_FILE for now
Calling virDomainRestoreFlags() with no typed params results in
an error in open() because it tries to open a NULL path.
Obviously, this is wrong and path to restore from must be
provided, at least for now until other sources of restore are
introduced. Then this limitation can be relaxed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Michal Privoznik [Thu, 12 May 2022 13:51:23 +0000 (15:51 +0200)]
lib: Repurpose virDomainSaveParams() with no VIR_DOMAIN_SAVE_PARAM_FILE
When no VIR_DOMAIN_SAVE_PARAM_FILE typed param is set when
calling virDomainSaveParams() then in turn virQEMUFileOpenAs()
tries to open a NULL path.
We have two options now:
1) require the typed param, which in turn may be promoted to a
regular argument, or
2) use this opportunity to make the API behave like
virDomainManagedSave() and use typed params to pass extra
arguments, instead of having to invent new managed save API
with typed params.
Let's go with option 2, as it is more future proof.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Michal Privoznik [Thu, 12 May 2022 11:32:49 +0000 (13:32 +0200)]
qemu: Don't check for qemuDomainManagedSavePath() retval
The qemuDomainManagedSavePath() function does no more than a
g_strdup_printf() and as such can't return NULL really.
Therefore, don't check for its return value.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Jiri Denemark [Wed, 11 May 2022 13:32:58 +0000 (15:32 +0200)]
qemu: Enable migration events only for fresh QEMU process
Every running QEMU process we are willing to reconnect (i.e., at least
3.1.0) supports migration events and we can assume the capability is
already enabled since last time libvirt daemon connected to its monitor.
Well, it's not guaranteed though. If libvirt 1.2.17 or older was used to
start QEMU 3.1.0 or newer, migration events would not be enabled. And if
the user decides to upgrade libvirt from 1.2.17 to 8.4.0 while the QEMU
process is still running, they would not be able to migrate the domain
because of disabled migration events. I think we do not really need to
worry about this scenario as libvirt 1.2.17 is 7 years old while QEMU
3.1.0 was released only 3.5 years ago. Thus a chance someone would be
running such configuration should be fairly small and a combination with
upgrading 1.2.17 to 8.4.0 (or newer) with running domains should get it
pretty much to zero. The issue would disappear ff the ancient libvirt is
first upgraded to something older than 8.4.0 and then to the current
libvirt.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Jiri Denemark [Wed, 11 May 2022 13:03:30 +0000 (15:03 +0200)]
qemu: Make migration events mandatory
All QEMU versions we care about support migration events and we should
be able to enable the associated capability when connecting to the
monitor. Failure to do so is thus considered fatal now.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Erik Skultety [Fri, 6 May 2022 13:24:56 +0000 (15:24 +0200)]
ci: Add a Fedora integration test job utilizing upstream QEMU
Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Erik Skultety [Fri, 6 May 2022 13:16:43 +0000 (15:16 +0200)]
ci: Add a new integration job template for the upstream QEMU scenario
YAML anchors don't work with Shell condition structures, so we cannot
simply reference the QEMU build template YAML anchor conditionally and
hence have everything as part of a single job template.
Instead, we have to "subclass" the .integration_tests template and
inject the QEMU building bits explicitly.
Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Erik Skultety [Fri, 6 May 2022 07:02:23 +0000 (09:02 +0200)]
ci: Introduce a template for upstream QEMU build
This was heavily inspired by QEMU's upstream CI buildtest-template.yml.
Rather than referencing QEMU's template directly (which GitLab can do),
this patch resorts to hard-coding the build steps ourselves, solely
because there's no guarantee QEMU will keep either the template file
name or the template name from which the build steps were mostly copied
from.
Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Erik Skultety [Fri, 6 May 2022 07:01:28 +0000 (09:01 +0200)]
ci: Break off the integration_tests template into more templates
There's quite a lot happening in the .integration_tests template
already even without adding upstream QEMU build into the mix.
Let's break the template into more pieces which can then reference
in the .integration_tests template when putting all the pieces back
together using YAML anchors.
Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Erik Skultety [Fri, 6 May 2022 06:16:46 +0000 (08:16 +0200)]
ci: Separate the integration job template to a separate file
Future patches will do more code extraction from the existing template
using YAML anchors so it'd be better that the templates would live
separately from job definitions.
Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Thu, 12 May 2022 07:59:57 +0000 (09:59 +0200)]
lib: Rename VIR_SAVE_PARAM_* to VIR_DOMAIN_SAVE_PARAM_*
A few commits ago new APIs were introduced (virDomainSaveParams()
and virDomainRestoreParams()) and with them new typed parameters:
VIR_SAVE_PARAM_FILE and VIR_SAVE_PARAM_DXML. But their name does
not suggest they apply to either of the APIs nor that they are
intended for domain related APIs. Switch to
VIR_DOMAIN_SAVE_PARAM prefix to make it obvious.
It's true we already have VIR_DOMAIN_SAVE_* symbols which are
part of virDomainSaveRestoreFlags enum, therefore stick also with
'_PARAM_ ' part of the name to differentiate the two.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
qemu: Disable spice-related devices without spice graphics
For most of them qemu errors out with unclear message, and for the
audiodev qemu just falls back to timer-based audio with a warning
message, and will possibly also error out in the future.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2035163 Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
tests: Adjust for invalid qemu command combinations
Everything spice is not supported (and does not make sense) without spice
graphics. For some tests I also added cirrus VGA capability so that the XML
stays simple and libvirt can guess a default video model rather than adding too
much of an irrelevant XML into the individual tests.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This old test was added by me to allow people to keep the spicevmc
channel while changing graphics type from spice to something else.
However we do not do this in other places and also now we have all the
Validate functions so it is better to show the user they will not have
the spicevmc channel available rather than simply not formatting it on
the qemu command line.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 11 May 2022 14:38:28 +0000 (16:38 +0200)]
qemu_domain: Drop needless 'error' label in qemuDomainObjPrivateXMLParse()
After previous cleanup the 'error' label in
qemuDomainObjPrivateXMLParse() contains nothing but a return
statement. Well, the label can be dropped and all 'goto'-s can be
replaced with the return statement directly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Michal Privoznik [Wed, 11 May 2022 14:37:50 +0000 (16:37 +0200)]
qemu_domain: Drop needless free from qemuDomainObjPrivateXMLParse()
The qemuDomainObjPrivateXMLParse() is responsible for parsing
given XML into qemuDomainObjPrivate struct. As it does so, memory
might be allocated for some members. If an error occurs during
parsing the control jumps onto 'error' label where only some of
previously allocated memory is freed. The reason there's no
memory leak is simple: the only caller (virDomainObjParseXML())
unrefs freshly created virDomainObj which in turn causes
qemuDomainObjPrivateFree() to be called. Therefore, these
partial, selective frees are needless and should be just dropped.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Michal Privoznik [Wed, 11 May 2022 14:27:18 +0000 (16:27 +0200)]
conf: Move virDomainObj::originalMemlock into qemuDomainObjPrivate
Since v1.3.0-90-gafbe1d4c56 the original value of memlock limit
is stored inside virDomainObj struct directly (under
originalMemlock member). This is needless because the value is
used only inside QEMU driver and thus can reside in
qemuDomainObjPrivate struct.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Jonathon Jongsma [Fri, 18 Mar 2022 20:51:39 +0000 (15:51 -0500)]
conf: add qemu-vdagent channel
Add the ability to configure a qemu-vdagent in guest domains. This
device is similar to the spice vdagent channel except that qemu handles
the spice-vdagent protocol messages itself rather than routing them over
a spice protocol channel.
The qemu-vdagent device has two notable configuration options which
determine whether qemu will handle particular vdagent features:
'clipboard' and 'mouse'.
The 'clipboard' option allows qemu to synchronize its internal clipboard
manager with the guest clipboard, which enables client<->guest clipboard
synchronization for non-spice guests such as vnc.
The 'mouse' option allows absolute mouse positioning to be sent over the
vdagent channel rather than using a usb or virtio tablet device.
Peter Krempa [Tue, 10 May 2022 07:55:15 +0000 (09:55 +0200)]
qemucapabilitiestest: Add test data for the qemu-7.1 dev cycle on x86_64
Notable schema changes:
- 'cluster-id' is now reported for CPU topology
- 'display-update' QMP command added
- 'main-loop' QOM object added with a whole set of properties
- 'cpu0-id' field reported in SEV data
- 'blockdev-change-medium' command now has 'force' property
- 'screendump' QMP command now has a 'format' property
- supported formats are 'ppm' and 'png'
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Validate the domain configuration to ensure that if there are more than
one vgpu assigned to a domain, only one of them has 'ramfb' enabled.
This was never a supported configuration. QEMU failed confusingly when
attempting to start a domain with this configuration. This change
attempts to provide better information about the error.
Michal Privoznik [Thu, 28 Apr 2022 11:19:11 +0000 (13:19 +0200)]
qemu_security: Drop qemuSecurityStartVhostUserGPU()
There's no real difference between
qemuSecurityStartVhostUserGPU() and qemuSecurityCommandRun(). The
latter is used more frequently while the former has just one
user. Therefore, drop the less frequently used one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
cpu_x86: Ignore enabled features for input models in x86DecodeUseCandidate
While we don't want to aim for the shortest list of disabled features in
the baseline result (it would select a very old model), we want to do so
while looking at any of the input models for which we're trying to
compute a baseline CPU model. Given a set of input models, we always
want to take the least capable one of them (i.e., the one with shortest
list of disabled features) or a better model which is not one of the
input models.
So when considering an input model, we just check whether its list of
disabled features is shorter than the currently best one. When looking
at other models we check both enabled and disabled features while
penalizing disabled features as implemented by the previous patch.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
cpu_x86: Penalize disabled features when computing CPU model
For finding the best matching CPU model for a given set of features
while we don't know the CPU signature (i.e., when computing a baseline
CPU model) we've been using a "shortest list of features" heuristics.
This works well if new CPU models are supersets of older models, but
that's not always the case. As a result it may actually select a new CPU
model as a baseline while removing some features from it to make it
compatible with older models. This is in general worse than using an old
CPU model with a bunch of added features as a guest OS or apps may crash
when using features that were disabled.
On the other hand we don't want to end up with a very old model which
would guarantee no disabled features as it could stop a guest OS or apps
from using some features provided by the CPU because they would not
expect them on such an old CPU.
This patch changes the heuristics to something in between. Enabled and
disabled features are counted separately so that a CPU model requiring
some features to be disabled looks worse than a model with fewer
disabled features even if its complete list of features is longer. The
penalty given for each additional disabled feature gets bigger to make
longer list of disabled features look even worse.
cpu_x86: Consolidate signature match in x86DecodeUseCandidate
Checking the signature in two different places makes no sense since the
code in between can only mark the candidate as the best option so far,
which is what the second signature match does as well.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
cpu_map: Disable cpu64-rhel* for host-model and baseline
These ancient RHEL-only CPU models should not really be used by any CPU
definition created by libvirt. We keep them just for backwards
compatibility with domains which might still be using them.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Claudio Fontana [Fri, 6 May 2022 13:10:52 +0000 (15:10 +0200)]
libvirt: introduce virDomainRestoreParams public API
add new API in order to be able to extend parameters to the domain
restore operation. We will use it to fit the existing arguments of
VirDomainRestoreFlags for now.
Signed-off-by: Claudio Fontana <cfontana@suse.de> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
testutilsqemu: Write getter/setter for CPU def global variables
As of 47503cc859 we are statically linking libtest_utils_qemu.a
into qemuhotplugmock.so (see the original commit for reasoning).
However, this breaks ASAN on older clang because now
qemuhotplugtest has two instances of virCPUDef global variables
(cpuDefault, cpuHaswell, cpuPower8, cpuPower9). One that comes
from the binary itself (which also links with
libtest_utils_qemu.a) and the other from the mock. Resolve this
by making the variables static and introducing getter and setter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
testutils: Write setter for virTestHostArch global variable
As of 47503cc859 we are statically linking libtest_utils.a into
qemuhotplugmock.so (see the original commit for reasoning).
However, this breaks ASAN on older clang because now
qemuhotplugtest has two instances of virTestHostArch global
variable. One that comes from the binary itself (which also links
with libtest_utils.a) and the other from the mock. Resolve this
by making the variable static and introducing getter and setter.
Well, the former already exists (as virArchFromHost()) so only
the latter is needed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
This was originally introduced in c2fb8bfee309, reportedly to
support symbol versioning on Solaris; more recently, 30b301c6eaa9
ported it to meson.
Up until the previous commit this has resulted in passing
-M .../libvirt/build/src/libvirt.syms
to the linker on macOS, but the implementation of the -M option
on that platform's linker is literally
else if ( strcmp(arg, "-M") == 0 ) {
// FIX FIX
}
so in practice we've been providing an additional input file,
which the linker understandably ignores after printing a warning
since it's not in any format that it recognizes.
Considering that LLVM's linker, which is now used by default on
FreeBSD, supports the same --version-script option as the GNU
linker, that we have introduced special handling for macOS, and
that we don't target Solaris, we can simply drop the branch at
this point.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
meson: Don't attempt to use version scripts on macOS
macOS libraries don't support symbol versioning, so the only
result that we achieve by passing additional flags to the linker
is a bunch of messages like
ld: warning: ignoring file .../libvirt/build/src/libvirt.syms,
building for macOS-x86_64 but attempting to link with file built
for unknown-unsupported file format ( 0x23 0x20 0x57 0x41 ... )
being produced during the build.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
meson: Refactor handling of link_args and link_depends
This ensures variable names and the overall structure of the
code setting and using them is consistent. It will also make
upcoming changes less disruptive.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Thu, 14 Apr 2022 10:44:31 +0000 (12:44 +0200)]
tests: Deduplicate some WITH_* checks
When constructing mock_libs array it is firstly initialized to a
static set of mocks followed by couple of WITH_* checks to append
driver specific mocks. These checks are then repeated when
filling some other variables (e.g. supplementary helpers,
libraries, tests, etc.). Dissolve the former in the latter since
we are already doing that, partially, for qemu (qemucapsprobemock
and qemuhotplugmock)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
test: Link qemuhotplugmock with test_utils_qemu and test_utils
As of ad81aa8ad07 the qemuhotplugmock.c calls
testQemuPrepareHostBackendChardevOne() which is implemented in
testutilsqemu.c. However, the mock is not linked with
testutilsqemu static library which makes some tools (valgrind
particularly) unhappy because the resulting mock library has
unresolved symbol.
The fix is simple, link mock library with test_utils_qemu_lib and
also with test_utils_lib since testutils.c calls some functions
from testutils.c.
Since these two libraries are declared only after mock_libs[], I
had to move the line that declares qemuhotplugmock after those
two.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Fri, 22 Apr 2022 12:15:47 +0000 (14:15 +0200)]
virnetdev: Fix regression in setting VLAN tag
In the past, we did set VLAN tag on <interface type='direct'/>.
However, during rewrite (v8.1.0-rc1~191) virNetDevSetVfConfig()
was changed and a condition that was responsible for calling
a function that sets VLAN tag was changed accidentally resulting
in VLAN tag not being set anymore.
However, because of other changes in the same patchset, it may
happen that @adminMac is NULL (this is to work around yet another
broken SRIOV driver), and thus we must refrain from setting MAC
and have to set VLAN tag only.
Fixes: 73961771a1cfec3c0f43caec9d117d2fbcc7af39
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075383 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Fri, 22 Apr 2022 12:15:46 +0000 (14:15 +0200)]
virNetDevSetVfMac: Fix error message on invalid args
If virNetDevSetVfMac() is called with either @macaddr or
@allowRetry arguments NULL an error is reported, because this is
considered invalid use. However, the error message is not
informative as it could be.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
projects / libvirt.git / log