Bernhard Beschow [Tue, 18 Oct 2022 21:01:42 +0000 (23:01 +0200)]
hw/sd/sdhci-internal: Unexport ESDHC defines
These defines aren't used outside of sdhci.c, so can be defined there.
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221018210146.193159-4-shentey@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Bernhard Beschow [Tue, 18 Oct 2022 21:01:41 +0000 (23:01 +0200)]
hw/block/pflash_cfi0{1, 2}: Error out if device length isn't a power of two
According to the JEDEC standard the device length is communicated to an
OS as an exponent (power of two).
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20221018210146.193159-3-shentey@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Bernhard Beschow [Tue, 18 Oct 2022 21:01:40 +0000 (23:01 +0200)]
docs/system/ppc/ppce500: Use qemu-system-ppc64 across the board(s)
The documentation suggests that there is a qemu-system-ppc32 binary
while the 32 bit version is actually just named qemu-system-ppc. Settle
on qemu-system-ppc64 which also works for 32 bit machines and causes
less clutter in the documentation.
Found-by: BALATON Zoltan <balaton@eik.bme.hu> Suggested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20221018210146.193159-2-shentey@gmail.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Leandro Lupori [Tue, 25 Oct 2022 20:24:24 +0000 (17:24 -0300)]
target/ppc: Increment PMC5 with inline insns
Profiling QEMU during Fedora 35 for PPC64 boot revealed that
6.39% of total time was being spent in helper_insns_inc(), on a
POWER9 machine. To avoid calling this helper every time PMCs had
to be incremented, an inline implementation of PMC5 increment and
check for overflow was developed. This led to a reduction of
about 12% in Fedora's boot time.
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221025202424.195984-4-leandro.lupori@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
BALATON Zoltan [Wed, 19 Oct 2022 16:02:58 +0000 (18:02 +0200)]
ppc4xx_sdram: Convert DDR SDRAM controller to new bank handling
Use the generic bank handling introduced in previous patch in the DDR
SDRAM controller too. This also fixes previously broken region unmap
due to sdram_ddr_unmap_bcr() ignoring container region so it crashed
with an assert when the guest tried to disable the controller.
BALATON Zoltan [Wed, 19 Oct 2022 16:02:57 +0000 (18:02 +0200)]
ppc4xx_sdram: Generalise bank setup
Currently only base and size are set on initial bank creation and bcr
value is computed on mapping the region. Set bcr at init so the bcr
encoding method becomes local to the controller model and mapping and
unmapping can operate on the bank so it can be shared between
different controller models. This patch converts the DDR2 controller.
BALATON Zoltan [Wed, 19 Oct 2022 16:02:56 +0000 (18:02 +0200)]
ppc4xx_sdram: Rename local state variable for brevity
Rename the sdram local state variable to s in dcr read/write functions
and reset methods for better readability and to match realize methods.
Other places not converted will be changed or removed in subsequent
patches.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <8e7539cb1fccd7556b68351c4dcf62534c3a69cf.1666194485.git.balaton@eik.bme.hu> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Matheus Ferst [Fri, 21 Oct 2022 14:21:55 +0000 (11:21 -0300)]
target/ppc: unify cpu->has_work based on cs->interrupt_request
Now that cs->interrupt_request indicates if there is any unmasked
interrupt, checking if the CPU has work to do can be simplified to a
single check that works for all CPU models.
Matheus Ferst [Fri, 21 Oct 2022 14:21:54 +0000 (11:21 -0300)]
target/ppc: introduce ppc_maybe_interrupt
This new method will check if any pending interrupt was unmasked and
then call cpu_interrupt/cpu_reset_interrupt accordingly. Code that
raises/lowers or masks/unmasks interrupts should call this method to
keep CPU_INTERRUPT_HARD coherent with env->pending_interrupts.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20221021142156.4134411-2-matheus.ferst@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Matheus Ferst [Tue, 11 Oct 2022 20:48:24 +0000 (17:48 -0300)]
target/ppc: move power-saving interrupt masking out of cpu_has_work_POWER7
Move the interrupt masking logic out of cpu_has_work_POWER7 in a new
method, p7_interrupt_powersave, that only returns an interrupt if it can
wake the processor from power-saving mode.
Matheus Ferst [Tue, 11 Oct 2022 20:48:22 +0000 (17:48 -0300)]
target/ppc: remove unused interrupts from p7_deliver_interrupt
Remove the following unused interrupts from the POWER7 interrupt
processing method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970 and POWER5p;
- Hypervisor Virtualization: introduced in Power ISA v3.0;
- Hypervisor Doorbell and Event-Based Branch: introduced in
Power ISA v2.07;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Doorbell and Critical Doorbell Interrupt: processor does not implement
the Embedded.Processor Control category;
- Programmable Interval Timer: 40x-only;
- PPC_INTERRUPT_THERM: only raised for 970 and POWER5p;
Matheus Ferst [Tue, 11 Oct 2022 20:48:20 +0000 (17:48 -0300)]
target/ppc: remove unused interrupts from p7_next_unmasked_interrupt
Remove the following unused interrupts from the POWER7 interrupt masking
method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970 and POWER5p;
- Hypervisor Virtualization: introduced in Power ISA v3.0;
- Hypervisor Doorbell and Event-Based Branch: introduced in
Power ISA v2.07;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Doorbell and Critical Doorbell Interrupt: processor does not implement
the Embedded.Processor Control category;
- Programmable Interval Timer: 40x-only;
- PPC_INTERRUPT_THERM: only raised for 970 and POWER5p;
Matheus Ferst [Tue, 11 Oct 2022 20:48:17 +0000 (17:48 -0300)]
target/ppc: move power-saving interrupt masking out of cpu_has_work_POWER8
Move the interrupt masking logic out of cpu_has_work_POWER8 in a new
method, p8_interrupt_powersave, that only returns an interrupt if it can
wake the processor from power-saving mode.
Matheus Ferst [Tue, 11 Oct 2022 20:48:15 +0000 (17:48 -0300)]
target/ppc: remove unused interrupts from p8_deliver_interrupt
Remove the following unused interrupts from the POWER8 interrupt
processing method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970 and POWER5p;
- Debug Interrupt: removed in Power ISA v2.07;
- Hypervisor Virtualization: introduced in Power ISA v3.0;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Critical Doorbell: processor does not implement the
"Embedded.Processor Control" category;
- Programmable Interval Timer: 40x-only;
- PPC_INTERRUPT_THERM: only raised for 970 and POWER5p;
Matheus Ferst [Tue, 11 Oct 2022 20:48:13 +0000 (17:48 -0300)]
target/ppc: remove unused interrupts from p8_next_unmasked_interrupt
Remove the following unused interrupts from the POWER8 interrupt masking
method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970, and POWER5p;
- Debug Interrupt: removed in Power ISA v2.07;
- Hypervisor Virtualization: introduced in Power ISA v3.0;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Critical Doorbell: processor does not implement the "Embedded.Processor
Control" category;
- Programmable Interval Timer: 40x-only;
- PPC_INTERRUPT_THERM: only raised for 970 and POWER5p;
Matheus Ferst [Tue, 11 Oct 2022 20:48:10 +0000 (17:48 -0300)]
target/ppc: move power-saving interrupt masking out of cpu_has_work_POWER9
Move the interrupt masking logic out of cpu_has_work_POWER9 in a new
method, p9_interrupt_powersave, that only returns an interrupt if it can
wake the processor from power-saving mode.
Matheus Ferst [Tue, 11 Oct 2022 20:48:08 +0000 (17:48 -0300)]
target/ppc: remove unused interrupts from p9_deliver_interrupt
Remove the following unused interrupts from the POWER9 interrupt
processing method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970 and POWER5p;
- Debug Interrupt: removed in Power ISA v2.07;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Critical Doorbell Interrupt: removed in Power ISA v3.0;
- Programmable Interval Timer: 40x-only.
Matheus Ferst [Tue, 11 Oct 2022 20:48:06 +0000 (17:48 -0300)]
target/ppc: remove unused interrupts from p9_next_unmasked_interrupt
Remove the following unused interrupts from the POWER9 interrupt masking
method:
- PPC_INTERRUPT_RESET: only raised for 6xx, 7xx, 970 and POWER5p;
- Debug Interrupt: removed in Power ISA v2.07;
- Critical Input, Watchdog Timer, and Fixed Interval Timer: only defined
for embedded CPUs;
- Critical Doorbell Interrupt: removed in Power ISA v3.0;
- Programmable Interval Timer: 40x-only.
This enum defines the bit positions in env->pending_interrupts for each
interrupt. However, except for the comparison in kvmppc_set_interrupt,
the values are always used as (1 << PPC_INTERRUPT_*). Define them
directly like that to save some clutter. No functional change intended.
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20221011204829.1641124-2-matheus.ferst@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Overall, these instructions are the hardest ones to measure performance
as the gvec implementation is affected by the immediate. Above there are
5 different scenarios when it comes to immediate and 2 when it comes to
rept/loop combination. The immediates scenarios are: all bits are 0
therefore the target register should just be changed to 0, with 1 bit
set, with 2 bits set in a combination the new implementation can deal
with using gvec, 4 bits set and the new implementation can't deal with
it using gvec and all bits set. The rept/loop scenarios are high loop
and low rept (so it should spend more time executing it than translating
it) and high rept low loop (so it should spend more time translating it
than executing this code).
These comparisons are between the upstream version, a previous similar
implementation and a one with a cleaner code(this one).
For a comparison with o previous different implementation:
<20221010191356.83659-13-lucas.araujo@eldorado.org.br>
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-13-lucas.araujo@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Moved XSTSTDCSP, XSTSTDCDP and XSTSTDCQP to decodetree and moved some of
its decoding away from the helper as previously the DCMX, XB and BF were
calculated in the helper with the help of cpu_env, now that part was
moved to the decodetree with the rest.
As some values are now decoded outside the helper and passed to it as an
argument the number of arguments of the helper increased, the number
of TCGop needed to load the arguments increased. I suspect that's why
the slow-down in the tests with a high REPT but low LOOP.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-12-lucas.araujo@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Moved XVTSTDCSP and XVTSTDCDP to decodetree an restructured the helper
to be simpler and do all decoding in the decodetree (so XB, XT and DCMX
are all calculated outside the helper).
Obs: The tests in this one are slightly different, these are the sum of
these instructions with all possible immediate and those instructions
are repeated 10 times.
This one to me seemed the opposite of the previous instructions, as it
looks like there was an improvement in the translation time (itself not
a surprise as operations were done twice before so there was the need to
translate twice as many TCGop)
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-9-lucas.araujo@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
target/ppc: Move VAVG[SU][BHW] to decodetree and use gvec
Moved the instructions VAVGUB, VAVGUH, VAVGUW, VAVGSB, VAVGSH, VAVGSW,
to decodetree and use gvec with them. For these one the right shift
had to be made before the sum as to avoid an overflow, so add 1 at the
end if any of the entries had 1 in its LSB as to replicate the "+ 1"
before the shift described by the ISA.
I wasn't expecting such a performance lost in both VPRTYBD and VPRTYBQ,
I'm not sure if it's worth to move those instructions. Comparing the
assembly of the helper with the TCGop they are pretty similar, so
I'm not sure why vprtybd took so much more time.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-6-lucas.araujo@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
target/ppc: Move V(ADD|SUB)CUW to decodetree and use gvec
This patch moves VADDCUW and VSUBCUW to decodtree with gvec using an
implementation based on the helper, with the main difference being
changing the -1 (aka all bits set to 1) result returned by cmp when
true to +1. It also implemented a .fni4 version of those instructions
and dropped the helper.
The significant difference in performance when REPT is low and LOOP is
high I think is due to the fact that the new implementation has a higher
translation time, as when using a helper only 5 TCGop are used but with
the patch a total of 10 TCGop are needed (Power lacks a direct mul_vec
equivalent so this instruction is implemented with the help of 5 others,
vmuleu, vmulou, vmrgh, vmrgl and vpkum).
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221019125040.48028-2-lucas.araujo@eldorado.org.br> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
* tag 'dump-pull-request' of https://gitlab.com/marcandre.lureau/qemu:
dump/win_dump: limit number of processed PRCBs
s390x: pv: Add dump support
s390x: Add KVM PV dump interface
include/elf.h: add s390x note types
s390x: Introduce PV query interface
s390x: Add protected dump cap
dump: Add architecture section and section string table support
dump: Reintroduce memory_offset and section_offset
dump: Reorder struct DumpState
dump: Write ELF section headers right after ELF header
dump: Use a buffer for ELF section data and headers
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Oct 2022 14:53:41 +0000 (10:53 -0400)]
Merge tag 'pull-tcg-20221026' of https://gitlab.com/rth7680/qemu into staging
Revert incorrect cflags initialization.
Add direct jumps for tcg/loongarch64.
Speed up breakpoint check.
Improve assertions for atomic.h.
Move restore_state_to_opc to TCGCPUOps.
Cleanups to TranslationBlock maintenance.
* tag 'pull-tcg-20221026' of https://gitlab.com/rth7680/qemu: (47 commits)
accel/tcg: Remove restore_state_to_opc function
target/xtensa: Convert to tcg_ops restore_state_to_opc
target/tricore: Convert to tcg_ops restore_state_to_opc
target/sparc: Convert to tcg_ops restore_state_to_opc
target/sh4: Convert to tcg_ops restore_state_to_opc
target/s390x: Convert to tcg_ops restore_state_to_opc
target/rx: Convert to tcg_ops restore_state_to_opc
target/riscv: Convert to tcg_ops restore_state_to_opc
target/ppc: Convert to tcg_ops restore_state_to_opc
target/openrisc: Convert to tcg_ops restore_state_to_opc
target/nios2: Convert to tcg_ops restore_state_to_opc
target/mips: Convert to tcg_ops restore_state_to_opc
target/microblaze: Convert to tcg_ops restore_state_to_opc
target/m68k: Convert to tcg_ops restore_state_to_opc
target/loongarch: Convert to tcg_ops restore_state_to_opc
target/i386: Convert to tcg_ops restore_state_to_opc
target/hppa: Convert to tcg_ops restore_state_to_opc
target/hexagon: Convert to tcg_ops restore_state_to_opc
target/cris: Convert to tcg_ops restore_state_to_opc
target/avr: Convert to tcg_ops restore_state_to_opc
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 26 Oct 2022 14:04:05 +0000 (10:04 -0400)]
Merge tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu into staging
aspeed queue :
* Performance improvement with Object class caching
* Serial Flash Discovery Parameters support for m25p80 device
* Various small adjustments on intructions and models
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmNX/WEACgkQUaNDx8/7
# 7KFhERAAhrcLcv15ny8RwatHPjzU00ZPQ0PcxGj1VDT66pCVh6M+rIeRPB2scOey
# Pu8jUvIYJ8w7ozjAP6YTQ1MP/WufniVi91Bx+vs/okSiWZa4dP0/G7NQWoc1at0s
# NBlkg57l1GMEeQb5x8vC1DizTQ1Z8Q8J/Ur3uXukXCmYVJAwHYpl/Foob1IPFgh8
# UcJ55LyuRq99lS8ib6HvRftAsC3DOcA/sl3b/TYR2+iKyi1VS2aZoQzxVCavSBcz
# PoTonT9O4OvIQthAgXRwpylW/aMYU3I7FeyOMKlCNLbmJ8LpVbX2v0KN3WBvWBv4
# OWP0DiqPUuoWFHLUGKbiVOgWQrTQXZyoD70SD/ObE1oMTLmeBoD1oFizQDvokHAR
# g2+gMdWnuWcbyaofY7YwuI6qz22gbrgh8JqX6sEWRDnY7HgCUvPhCsmci+bdN5cf
# dGcE8YKi7aD5gzoU9LRziPlhbwaEsgYLpYS7aGfNcmypgeq6lmNG7xKyw911zCTY
# uqDZWOUJy0tUIUTxoz3o1/KtsTFugjuZ+9W1SxELptJR37iwlP1vumf6bduwcx/3
# ba8tzNoXecXO5Icmq5P3lMNVM/abpkDDKS66HA87mABLEd/eCD0ojR9Kfxo0mD74
# kmQK3MFfJPkTu0ddu1cWhCIgTO7EuLuZL7gzj1oxoeXiU3YcVh8=
# =u7pS
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Oct 2022 11:14:41 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu:
arm/aspeed: Replace mx25l25635e chip model
m25p80: Add the w25q01jvq SFPD table
m25p80: Add the w25q512jv SFPD table
m25p80: Add the w25q256 SFPD table
m25p80: Add the mx66l1g45g SFDP table
m25p80: Add the mx25l25635f SFPD table
m25p80: Add the mx25l25635e SFPD table
m25p80: Add erase size for mx25l25635e
m25p80: Add the n25q256a SFDP table
m25p80: Add basic support for the SFDP command
hw/arm/aspeed: increase Bletchley memory size
ast2600: Drop NEON from the CPU features
aspeed/smc: Cache AspeedSMCClass
ssi: cache SSIPeripheralClass to avoid GET_CLASS()
tests/avocado/machine_aspeed.py: Fix typos on buildroot
hw/i2c/aspeed: Fix old reg slave receive
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Viktor Prutyanov [Wed, 19 Oct 2022 23:59:48 +0000 (02:59 +0300)]
dump/win_dump: limit number of processed PRCBs
When number of CPUs utilized by guest Windows is less than defined in
QEMU (i.e., desktop versions of Windows severely limits number of CPU
sockets), patch_and_save_context routine accesses non-existent PRCB and
fails. So, limit number of processed PRCBs by NumberProcessors taken
from guest Windows driver.
Signed-off-by: Viktor Prutyanov <viktor.prutyanov@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221019235948.656411-1-viktor.prutyanov@redhat.com>
Janosch Frank [Mon, 17 Oct 2022 08:38:22 +0000 (08:38 +0000)]
s390x: pv: Add dump support
Sometimes dumping a guest from the outside is the only way to get the
data that is needed. This can be the case if a dumping mechanism like
KDUMP hasn't been configured or data needs to be fetched at a specific
point. Dumping a protected guest from the outside without help from
fw/hw doesn't yield sufficient data to be useful. Hence we now
introduce PV dump support.
The PV dump support works by integrating the firmware into the dump
process. New Ultravisor calls are used to initiate the dump process,
dump cpu data, dump memory state and lastly complete the dump process.
The UV calls are exposed by KVM via the new KVM_PV_DUMP command and
its subcommands. The guest's data is fully encrypted and can only be
decrypted by the entity that owns the customer communication key for
the dumped guest. Also dumping needs to be allowed via a flag in the
SE header.
On the QEMU side of things we store the PV dump data in the newly
introduced architecture ELF sections (storage state and completion
data) and the cpu notes (for cpu dump data).
Users can use the zgetdump tool to convert the encrypted QEMU dump to an
unencrypted one.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Message-Id: <20221017083822.43118-11-frankja@linux.ibm.com>
Janosch Frank [Mon, 17 Oct 2022 08:38:20 +0000 (08:38 +0000)]
include/elf.h: add s390x note types
Adding two s390x note types
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221017083822.43118-9-frankja@linux.ibm.com>
Add a tcg_ops hook to replace the restore_state_to_opc
function call. Because these generic hooks cannot depend
on target-specific types, temporarily, copy the current
target_ulong data[] into uint64_t d64[].
Reviewed-by: Claudio Fontana <cfontana@suse.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since the only user, Arm MTE, always requires allocation,
merge the get and alloc functions to always produce a
non-null result. Also assume that the user has already
checked page validity.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
accel/tcg: Call tb_invalidate_phys_page for PAGE_RESET
When PAGE_RESET is set, we are replacing pages with new
content, which means that we need to invalidate existing
cached data, such as TranslationBlocks. Perform the
reset invalidate while we're doing other invalidates,
which allows us to remove the separate invalidates from
the user-only mmap/munmap/mprotect routines.
In addition, restrict invalidation to PAGE_EXEC pages.
Since cdf713085131, we have validated PAGE_EXEC is present
before translation, which means we can assume that if the
bit is not present, there are no translations to invalidate.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
projects / qemu-xen.git / log