googletest: default-disable on all of MIPS for now
Parts of the fusefs tests trigger a bug in current versions of llvm: IR
representation of some routine for the MIPS targets is a function with a
large number of arguments. This then leads the compiler on an hour+ long
goose chase, which is OK if you build the current tree but less-so if you're
trying external toolchain or doing a universe build involving mips when it
eventually gets switched over to LLVM.
Better, accurate details can be found in LLVM PR43263.
mips: ubldr: use truncated load address for mips32
BFD appears to silently truncate 0xffffffff80800000 when it processes the
ldscript for 32-bit mips, but LLD chokes on it as the linker script tries to
place elements above 32-bit range. It's unclear to me if silent truncation
is kosher or not and whether this patch is really what we want to do, but it
is one approach at least.
The ioctl(2) is intended to provide more details about the cause of
the down for the link.
Eventually we might define a comprehensive list of codes for the
situations. But interface also allows the driver to provide free-form
null-terminated ASCII string to provide arbitrary non-formalized
information. Sample implementation exists for mlx5(4), where the
string is fetched from firmware controlling the port.
Further refine r352393, only call vnode_pager_setsize() outside the
node lock when shrinking.
This is similar to r252528, applied to the above commit.
Apparently there is a race which makes necessary at least to keep the
n_size and pager size consistent when extending. Current suspect is
that iod threads perform vnode_pager_setsize() without taking the
vnode lock, which corrupts the file content.
Reported and tested by: Masachika ISHIZUKA <ish@amail.plala.or.jp>
Discussed with: rmacklem (related issues)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
See http://www.open-std.org/jtc1/sc22/wg14/www/docs/summary.htm#dr_400.
Upstream jemalloc issue is opened by emaste at
https://github.com/jemalloc/jemalloc/issues/1629.
Reviewed by: emaste
PR: 240456
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
DIfferential revision: https://reviews.freebsd.org/D21632
The VFS-level clustering code collects together sequential blocks
by issuing delayed-writes (bdwrite()) until a non-sequential block
is written or the maximum cluster size is reached. At that point
it collects the delayed buffers together (using bread()) to write
them in a single operation. The assumption was that since we just
looked at them they will still be in memory so there is no need to
check for a read error from bread(). Very occationally (apparently
every 10-hours or so when being pounded by Peter Holm's tests)
this assumption is wrong.
The fix is to check for errors from bread() and fail the cluster
write thus falling back to the default individual flushing of any
still dirty buffers.
Reported by: Peter Holm and Chuck Silvers
Reviewed by: kib
MFC after: 3 days
This one is very hard to run into. If the filesystem is being unmounted or
the mount point is freed the vfs_op_thread_enter will fail. For it to
succeed the mount point itself would have to be reallocated in the time
window between the initial read and the attempt to enter.
The ioalign property does define the alignment of data buffer.
If the alignment is required and our buffer is not aligned, or if
the data buffer is not multiple of Blocksize, we need to use bounce buffer
to perform the block IO. This is much like with BIOS version, except
there the INT13 needs buffer to be located in low memory.
Additionally, we need to handle disk writes properly.
Clean up libstand zalloc* sources. Note that it is not 100% whitespace cleanup.
I also reduced block in znalloc and zfree as those were obvious simplifications
and did help to save one level of indent.
mips: move support for temporary mappings above KSEG0 to per-CPU data
This is derived from similar work done in r310481 for i386 and r312610 for
armv6/armv7. Additionally, use a critical section to keep the thread
pinned for per-CPU operations instead of completely disabling local interrupts.
No objections from: adrian, jmallett, imp
Differential Revision: https://reviews.freebsd.org/D18593
The EARLY_AP_STARTUP option initializes non-boot processors
much sooner during startup. This adds support for this option
on RISC-V and enables it by default for GENERIC.
There are 3 counters modified all the time in this structure - one for
keeping the structure alive, one for preventing unmount and one for
tracking active writers. Exact values of these counters are very rarely
needed, which makes them a prime candidate for conversion to a per-cpu
scheme, resulting in much better performance.
Sample benchmark performing fstatfs (modifying 2 out of 3 counters) on
a 104-way 2 socket Skylake system:
before: 852393 ops/s
after: 76682077 ops/s
Reviewed by: kib, jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21637
New primitive is introduced to denote sections can operate locklessly
on aspects of struct mount, but which can also be disabled if necessary.
This provides an opportunity to start scaling common case modifications
while providing stable state of the struct when facing unmount, write
suspendion or other events.
mnt_ref is the first counter to start being managed in this manner with
the intent to make it per-cpu.
Reviewed by: kib, jeff
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21425
Where open(2) is expected to fail, the tests should assert or expect that
its return value is -1. These tests all accepted too much but happened to
pass anyway.
Reported by: Coverity
Coverity CID: 1404512, 1404378, 1404504, 1404483
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Assert that the refcount value is not VPRC_BLOCKED in vm_page_drop().
VPRC_BLOCKED is a refcount flag used to indicate that a thread is
tearing down mappings of a page. When set, it causes attempts to wire a
page via a pmap lookup to fail. It should never represent the last
reference to a page, so assert this.
Fix a race in vm_page_dequeue_deferred_free() after r352110.
This function loaded the page's queue index before setting PGA_DEQUEUE.
In this window the page daemon may have deactivated the page, updating
its queue index. Make the operation atomic using vm_page_pqstate_cmpset();
the page daemon will not modify the page once it observes that PGA_DEQUEUE
is set.
fusefs: fix some minor issues with fuse_vnode_setparent
* When unparenting a vnode, actually clear the flag. AFAIK this is basically
a no-op because we only unparent a vnode when reclaiming it or when
unlinking.
* There's no need to call fuse_vnode_setparent during reclaim, because we're
about to free the vnode data anyway.
Reviewed by: emaste
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21630
Since TX interrupt is generated when THRE is set, wait for TEMT set means
wait for full character transmission time. At low speeds that may take
awhile, burning CPU time while holding sc_hwmtx lock, also congested.
ian [Sun, 15 Sep 2019 19:38:15 +0000 (19:38 +0000)]
Apply a runtime patch to the FDT data for imx6 to fix iomuxc problems.
The latest imported FDT data defines a node for an iomuxc-gpr device,
which we don't support (or need, right now) in addition to the usual
iomuxc device. Unfortunately, the dts improperly assigns overlapping
ranges of mmio space to both devices. The -gpr device is also a syscon
and simple_mfd device.
At runtime the simple_mfd driver attaches for the iomuxc-gpr node, then
when the real iomuxc driver comes along later, it fails to attach because
it tries to allocate its register space, and it's already partially in
use by the bogus instance of simple_mfd.
This change works around the problem by simply disabling the node for
the iomuxc-gpr device, since we don't need it for anything.
When the IP layer calls back into the SCTP layer to perform the SCTP
checksum computation, do not assume that the IP header chain and the
SCTP common header are in contiguous memory although the SCTP lays
out the mbuf chains that way. If there are IP-level options inserted
by the IP layer, the constraint is not fulfilled anymore.
This issues was found by running syzkaller. Thanks to markj@ who is
running an instance which also provides kernel dumps. This allowed me
to find this issue.
A future change to posixshm to add file sealing (in DIFF_21391[0] and child)
will move locking out of shm_dotruncate as kern_shm_open() will require the
lock to be held across the dotruncate until the seal is actually applied.
For this, the cookie is passed into shm_dotruncate_locked which asserts
RCA_WLOCKED.
[0] Name changed to protect the innocent, hopefully, from getting autoclosed
due to this reference...
ian [Sun, 15 Sep 2019 01:02:01 +0000 (01:02 +0000)]
Make the ti_sysc device quiet. It's an internal utility pseudo-device
that makes the upstream FDT data work right, so we don't need to see a
couple dozen instances of it spam the dmesg at boot time unless it's a
verbose boot.
ian [Sat, 14 Sep 2019 19:33:36 +0000 (19:33 +0000)]
Create a mechanism for encoding a system errno into the IIC_Exxxxx space.
Errors are communicated between the i2c controller layer and upper layers
(iicbus and slave device drivers) using a set of IIC_Exxxxxx constants which
effectively define a private number space separate from (and having values
that conflict with) the system errno number space. Sometimes it is necessary
to report a plain old system error (especially EINTR) from the controller or
bus layer and have that value make it back across the syscall interface
intact.
I initially considered replicating a few "crucial" errno values with similar
names and new numbers, e.g., IIC_EINTR, IIC_ERESTART, etc. It seemed like
that had the potential to grow over time until many of the errno names were
duplicated into the IIC_Exxxxx space.
So instead, this defines a mechanism to "encode" an errno into the IIC_Exxxx
space by setting the high bit and putting the errno into the lower-order
bits; a new errno2iic() function does this. The existing iic2errno()
recognizes the encoded values and extracts the original errno out of the
encoded value. An interesting wrinkle occurs with the pseudo-error values
such as ERESTART -- they aleady have the high bit set, and turning it off
would be the wrong thing to do. Instead, iic2errno() recognizes that lots of
high bits are on (i.e., it's a negative number near to zero) and just
returns that value as-is.
Thus, existing drivers continue to work without needing any changes, and
there is now a way to return errno values from the lower layers. The first
use of that is in iicbus_poll() which does mtx_sleep() with the PCATCH flag,
and needs to return the errno from that up the call chain.
Introduce arb(3), the Array-based Red-Black Tree macros: similar
to the traditional tree(3) RB trees, but using an array (preallocated,
linear chunk of memory) to store the tree.
This avoids allocation overhead, improves memory locality,
and makes it trivially easy to share/transfer/copy the entire tree
without the need for marshalling. The downside is that the size
is fixed at initialization time; there is no mechanism to resize
it.
This is one of the dependencies for the new stats(3) framework
(https://reviews.freebsd.org/D20477).
Make pseudofs(9) create directory entries in order, instead
of the reverse.
This fixes Linux sysctl(8) binary - it assumes the first two
directory entries are always "." and "..". There might be other
Linux apps affected by this.
NB it might be a good idea to rewrite it using queue(3).
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21550
- Fix the statement that big5 is a de facto standard of Traditional Chinese
text [1]
- Add a BUGS section describes the problem of big5 and suggests use utf8
PR: 189095
Submitted by: Brennan Vincent <brennan@umanwizard.com> [1]
Reviewed by: Ting-Wei Lan <lantw44@gmail.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21622
This command will trigger a reload of the configuration from disk. This is
useful if you've changed currdev from recovery media to local disk as much
as I have over the past ~2 hours and are tired of the extra keystrokes.
This is really just a glorified shortcut, but reload-conf is likely easier
to remember for other people and does save some keystrokes when reloading
the configuration. It is also resilient to the underlying config method
changing interface, but this is unlikely to happen.
powerpc64/powernv: Add opal NVRAM driver for PowerNV systems
Add a very basic NVRAM driver for OPAL which can be used by the IBM
powerpc-utils nvram utility, not to be confused with the base nvram utility,
which only operates on powermac_nvram.
The IBM utility handles all partitions itself, treating the nvram device as
a plain store.
An alternative would be to manage partitions in the kernel, and augment the
base nvram utility to deal with different backing stores, but that
complicates the driver significantly. Instead, present the same interface
IBM's utlity expects, and we get the usage for free.
riscv trap_pfault: remove unneeded hold of the process around vm_fault() call.
This is re-appearance of the nop code removed from other arches in r287625.
Reviewed by: alc (as part of the larger patch), markj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
DIfferential revision: https://reviews.freebsd.org/D21645
1. If we release the last usecount we take ownership of the hold count, which
means the vnode will remain allocated until we vdrop it.
2. If someone else vrefs they will find no usecount and will proceed to add
their own hold count.
3. No code has a problem with v_usecount transitioning to 0 without the
interlock
These facts combined mean we can fetchadd instead of having a cmpset loop.
Reviewed by: kib (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21528
This version bring many fixes regarding unicode support
It also adds proper support for filename completion (we do not need our custom
patches anymore)
Improves the libreadline compatibility
Note that the same work was done by Yuichiro Naito in
https://reviews.freebsd.org/D21196 the main difference is in this case we have
reimported libedit in contrib to fix a long standing mess in the previous merges
which prevented a proper update workflow. (discussed long ago with pfg@)
The only difference with upstream libedit is we have added a compatibility shim
for the _elf_fn_sh_complete function which we previously added to support quoting
in filename completion and is not needed anymore.
This was added to continue supported old /bin/sh binaries and not break backward
compatibility (as discussed with jilles@)
Those scripts are without copyright and license assignement since their creation
After grabbing information from The various authors and contributors assign
proper license header and copyrights.
This has been reported by yuripv in his work on integrating those in Illumos!
[jail] removal by jid doesn't trigger pre/post stop scripts
This commit fixes bug: command "jail -r" didn't trigger pre/post stop
commands (and others) defined in config file if jid is specified insted of
name. Also it adds basic tests for usr.sbin/jail to avoid regression.
Reviewed by: jamie, kevans, ray
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D21328
This only lists the changed type and not other attributes so that it
matches the behavior of -C as done in r66747 for fmtree. The NetBSD
-ff implementation was copied from fmtree.
[Bug 240473] add support of Ralink RT5390R Wireless Card
This commit adds PCI ID of Ralink RT5390R into ids table of driver ral.
Tests show stability of card during day. Network speed is reasonable (
around several megabytes per second).
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=240473
Reported by: zetrotrack000@gmail.com
Reviewed by: ray
Approved by: ray
MFC after: 5 days
Differential Revision: https://reviews.freebsd.org/D21604
Use REFCOUNT_COUNT() to obtain refcount where appropriate.
Refcount waiting will set some flag bits in the refcount value.
Make sure these bits get cleared by using the REFCOUNT_COUNT()
macro to obtain the actual refcount.
Get the readline header from the installed header instead of the from the source
location.
With newer import of libedit, the path to be able to access readline/readline.h
will also include header which name will conflict with some expected by ntp in
another path and end up breaking the build.
projects / freebsd.git / log