Michal Privoznik [Thu, 14 Feb 2019 09:44:15 +0000 (10:44 +0100)]
qemu_hotplug: Assume chardev alias always exists in qemuDomainDetachChrDevice
The @tmpChr is looked up in domain definition based on user
provided chardev XML. Therefore, the alias must have been
allocated already when domain was started up.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
The guestfwd channels are -netdevs really. Hotunplug them as
such. Also, DEVICE_DELETED event is not triggered (surprisingly,
since we're not issuing device_del rather than netdev_del) and
associated chardev is removed automagically too. This means that
we need to do qemuDomainRemoveChrDevice() minus monitor call to
remove the chardev.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Michal Privoznik [Mon, 11 Feb 2019 13:13:39 +0000 (14:13 +0100)]
qemu: Use @tmpChr in qemuDomainDetachChrDevice to build device string
So far we are passing @chr to qemuBuildChrDeviceStr. This is
suboptimal (in fact wrong) because @chr is just parsed XML
definition provided by user which by definition may lack some
information. On the other hand, @tmpChr is the one that was found
using @chr in domain definition so it contains the same amount of
information or more.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
The code for creating external snapshots for an offline domain
called out to qemu-img without escaping commas in the manner
that qemu-img expects. This also fixes a typo in the comment.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Laine Stump [Wed, 13 Feb 2019 15:57:57 +0000 (10:57 -0500)]
util: fix memory leak in virFirewallDInterfaceSetZone()
commit 3bba4825 added the new function virFirewallDInterfaceSetZone()
which calledsends virDBUSCallMethod a DBusMessage** for the reply
message, but doesn't use the reply, and also doesn't free it. Since
this arg is allowed to be NULL, this patch simply sets it to NULL so
we don't have to deal with it.
Signed-off-by: Laine Stump <laine@laine.org> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
John Ferlan [Tue, 12 Feb 2019 13:36:40 +0000 (08:36 -0500)]
util: Check for duplicated id in virStorageSourceParseRBDColonString
If we find multiple "id=" strings during processing, then we need
to force an error since we cannot have multiple <auth>'s defined
for a single source volume.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
John Ferlan [Tue, 12 Feb 2019 12:46:38 +0000 (07:46 -0500)]
storage: Rework ret logic in storageBackendUpdateVolTargetInfo
Rather than overload @ret with trying serve multiple purposes,
let's initialize @ret to -1 and introduce an @rc function return
value that can be used for functions that may return -1 or -2
and only override @ret when rc < 0.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
John Ferlan [Thu, 7 Feb 2019 13:11:03 +0000 (08:11 -0500)]
test: Cleanup testDomainRenameCallback
Rather than have a need for old_dom_name, let's just VIR_FREE
the old name first, then use VIR_STEAL_PTR to handle the swap
from the old name to the new name.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Commit a523770c3 added @retval return processing for
virStorageBackendUpdateVolInfo in order to allow a -2
to be return; however, upon successful completion
@retval = 0 and if either the virStorageBackendSCSISerial
or the virStoragePoolObjAddVol failed, the method would
return 0, but not add the @vol to the pool. So let's
just reset retval = -1 and continue processing.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
John Ferlan [Tue, 12 Feb 2019 02:46:28 +0000 (21:46 -0500)]
src: Fix label logic in virStorageBackendSCSITriggerRescan
Let's initialize @path to NULL, then rather than use two labels
free_path and out labels, let's use the cleanup: label to call
VIR_FREE(path); and VIR_FORCE_CLOSE(fd);
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
John Ferlan [Tue, 12 Feb 2019 11:30:35 +0000 (06:30 -0500)]
storage: Fix error path in virStorageBackendSheepdogRefreshVol
If the virAsprintf of the vol->key fails, then we would erroneously
return the '0' from the @ret from virStorageBackendSheepdogParseVdiList.
So in this error path case, let's set ret = -1.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
John Ferlan [Thu, 7 Feb 2019 23:41:58 +0000 (18:41 -0500)]
conf: Rework virStoragePoolDefParseXML
Rather than having an error path, let's rework the code to allocate
and fill into an @def variable and then steal that into @ret when we
are successful leaving just a cleanup: path.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
John Ferlan [Thu, 7 Feb 2019 22:43:27 +0000 (17:43 -0500)]
conf: Rework virStorageVolDefParseXML
Rather than having an error path, let's rework the code to allocate
and fill into an @def variable and then steal that into @ret when we
are successful leaving just a cleanup: path.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
John Ferlan [Thu, 7 Feb 2019 22:21:31 +0000 (17:21 -0500)]
util: Rework virStorageAuthDefCopy
Rather than having an error path, let's rework the code to allocate
and fill into an @authdef variable and then steal that into @ret when
we are successful leaving just a cleanup: path.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Also, commit 932534e8 removed the last use of this apart from:
* parsing/formatting this in the caps cache
* using it as a temporary variable to know when to report an error
Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Ján Tomko [Tue, 12 Feb 2019 08:09:01 +0000 (09:09 +0100)]
virsh: allow empty targets in cmdDomFSInfo
Ever since the introduction of the guest-get-fsinfo command
in QEMU commit 46d4c572 qga/qapi-schema.json says that
the 'disks' array can possibly be empty. For example when getting
the target list is unsupported:
https://bugzilla.redhat.com/show_bug.cgi?id=1567041
Pass an empty string instead of NULL to vshTableRowAppend to prevent
a mismatched column number.
Ján Tomko [Tue, 12 Feb 2019 06:53:20 +0000 (07:53 +0100)]
virsh: introduce 'ret' in cmdDomFSInfo
Failing to print the table is also a reason to return failure
and print the reported error.
Switch to the usual pattern where we fall through the cleanup
label right after setting ret to true instead of infering the
return value from the number of filesystems returned.
The wireshark-2.4.0 is almost 2 years old now. Assuming anybody
interested in running latest libvirt doesn't run old wireshark,
it is safe to do this. It also simplifies the code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Since wirshark-2.5.0 toplevel plugins are no longer loaded. Only
plugins from epan/, wiretap/ or codecs/ subdirs are. Update the
plugin dir we generate. This is safe to do even for older
wiresharks, since they load plugins from there too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
wireshark: Provide registration code for newer wireshark
As advertised in previous commits, wireshark has changed the way
that plugins register. In fact, it has done so two times since
the last time we've touched our code (wireshark v2.5.0 and
v2.9.0). Use the wireshark script from respective releases to
generate newer registration callbacks and put them into our code.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
tools: Keep wireshark plugin registration code in git
In order to be able to dissect libvirt protocol the wireshark
plugin needs to be registered. So far this plugin registration
code was generated on every build using a script that was copied
over from wireshark's tools/ directory.
This is suboptimal, because the way that plugins register changes
across wireshark releases. Therefore, let's keep the generated
file in the git, put the command line used to generate the file
into a comment and remove the script.
This solution allows us to put different registration mechanism
into one file (under #ifdef-s) and thus compile with wider range
of wireshark releases.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Move the majority of the packet-libvirt.h content into
packet-libvirt.c and expose only register functions which are the
only ones that are not static.
The rationale behind is that packet-libvirt.h will be included
from packet.c and therefore the header file needs to be as clean
as possible.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Cole Robinson [Wed, 6 Feb 2019 23:26:05 +0000 (18:26 -0500)]
docs: storage: owner/group default to libvirtd UID/GID
Commit fafcc818f changed the docs to say that when creating a
pool directory or file volume with no owner/group specified, they
will be inherited from the parent directory. This isn't correct
now and doesn't seem to have ever been correct
In reality default owner/group is whatever UID/GID libvirtd is
running as
rpc: client: stream: fix multi thread abort/finish
If 2 threads call abort for example then one of them
will hang because client will send 2 abort messages and
server will reply only on first of them, the second will be
ignored. And on server reply client changes the state only
one of abort message to complete, the second will hang forever.
There are other similar issues.
We should complete all messages waiting reply if we got
error or expected abort/finish reply from server. Also if one
thread send finish and another abort one of them will win
the race and server will either abort or finish stream. If
stream is aborted then thread requested finishing should report
error. In order to archive this let's keep stream closing reason
in @closed field. If we receive VIR_NET_OK message for stream
then stream is finished if oldest (closest to queue end) message
in stream queue is finish message and stream is aborted if oldest
message is abort message. Otherwise it is protocol error.
By the way we need to fix case of receiving VIR_NET_CONTINUE
message. Now we take oldest message in queue and check if
this is dummy message. If one thread first sends abort and
second thread then receives data then oldest message is abort
message and second thread won't be notified when data arrives.
Let's find oldest dummy message instead.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
rpc: client stream: dispose private data on stream dispose
If we call virStreamFinish and virStreamAbort from 2 distinct
threads for example we can have access to freed memory.
Because when virStreamFinish finishes for example virStreamAbort
yet to be finished and it access virNetClientStreamPtr object
in stream->privateData.
Also it does not make sense to clear @driver field. After
stream is finished/aborted it is better to have appropriate
error message instead of "unsupported error".
This commit reverts [1] or virNetClientStreamPtr and
virStreamPtr will never be unrefed due to cyclic dependency.
Before this patch we don't have leaks because all execution
paths we call virStreamFinish or virStreamAbort.
Checking virNetClientStreamRaiseError without client lock
is racy which is fixed in [1] for example. Thus let's remove such checks
when we are sending message to server. And in other cases
(like virNetClientStreamRecvHole for example) let's move the check
into client stream code.
virNetClientStreamRecvPacket already have stream lock so we could
introduce another error checking function like virNetClientStreamRaiseErrorLocked
but as error is set when both client and stream lock are hold we
can remove locking from virNetClientStreamRaiseError because all
callers hold either client or stream lock.
Also let's split virNetClientStreamRaiseErrorLocked into checking
state function and checking message send status function. They are
same yet.
[1] 1b6a29c21: rpc: fix race on stream abort/finish and server side abort
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Stream server error is not propagated if thread does not have the buck.
In case we have the buck we are ok due to the code added in [1].
Let's check for stream error on all paths. Now we don't need
to raise error in virNetClientCallDispatchStream.
Old code reported error only if the first message in wait
queue awaits reply. It is odd as depends on wait queue
situation. For example if we have only TX
message in queue and in one iteration loop both send the
message and receive error then thread sending TX message did
not receive the error. Next if we have RX message (first)
and TX message (second) in queue and in one iteration
loop both send the TX message and receive error then
thread sending TX message received error. In short
it was inconsistent. Let's report error whenever
we received it and for every type of message as it makes
sense to report errors as early as possible.
[1] 16c6e2b41: Fix propagation of RPC errors from streams
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
In next patches we'll add stream state checks to this
function that applicable to all call paths. This is handy
place because we hold client lock here.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com>
rpc: fix race on stream abort/finish and server side abort
Stream abort/finish can hang because we can receive abort message
from server and yet sent abort/finish message to server. The latter
will not be answered ever because after server sends abort message
it forgets the stream and messages for unknown stream are simply ignored.
We check for stream error at the very beginning of remoteStreamFinish/remoteStreamAbort
but stream error can be set after the check in another thread operating
on stream. Let's check for stream error under client lock similar
to what's done in [1].
These functions do mostly the same things, and it would be
preferrable if they did them in mostly the same ways. This
also fixes a few violations to our code style guidelines.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Andrea Bolognani [Wed, 28 Nov 2018 16:45:37 +0000 (17:45 +0100)]
qemu: Move qemuDomainSupportsPCI() to qemu_domain
The function operates on a virDomainDef and is not tied to
device address assignment in any way, so it makes more sense
for it to live along with qemuDomainIs*() and the like.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Andrea Bolognani [Wed, 28 Nov 2018 15:56:35 +0000 (16:56 +0100)]
qemu: Add arch checks to qemuDomainMachine*()
There is very little overlap in the machine types available
on different architectures, so broadly speaking checking the
machine type is usually enough; regardless, it's better to
check the architecture as well.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Andrea Bolognani [Wed, 28 Nov 2018 15:15:31 +0000 (16:15 +0100)]
qemu: Move functions around
Make sure related functions, eg. all qemuDomainIs*(), are
close together instead of being sprinkled throughout both
the header and implementation file, and also that all
qemuDomainMachine*() functions are declared first since
we're going to make a bunch of them static later on.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Andrea Bolognani [Wed, 28 Nov 2018 14:04:51 +0000 (15:04 +0100)]
qemu: Use more specific prefixes
While the chances of the current checks resulting in false
positives are basically zero, it's still nicer to check for
the full prefix instead of the prefix's prefix.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Erik Skultety [Fri, 8 Feb 2019 10:42:14 +0000 (11:42 +0100)]
docs: Update the AMD SEV's spec URL
Luckily, the new URL still points to the same location, the only change
is in the document name where an escaped space (%20) was replaced by an
underscore.
Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Thu, 7 Feb 2019 11:50:27 +0000 (12:50 +0100)]
qemu: caps: Probe events from 'query-qmp-schema' rather than 'query-events'
QEMU plans to deprecate 'query-events' as it's non-extensible. Events
are also described by 'query-qmp-schema' so we can use that one instead.
This patch adds detection of events to
virQEMUCapsProbeQMPSchemaCapabilities using the same structure declaring
them for the old approach (virQEMUCapsEvents). This is possible as the
name is the same in the QMP schema and our detector supports that
trivially.
For any complex queries virQEMUCapsQMPSchemaQueries can be used in the
future.
For now we still call 'query-events' and discard the result so that it's
obvious that the tests pass. This will be cleaned up later.
projects / libvirt.git / log