The breakage is caused by pngconfig.h which checks whether
setjmp.h was already included and fails because qemu-common.h
includes setjmp.h.
The check is disabled by defining PNG_SKIP_SETJMP_CHECK.
Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Sat, 28 May 2011 06:51:52 +0000 (06:51 +0000)]
TCG/x86: use TCG_REG_CALL_STACK instead of TCG_REG_ESP
Except for specific cases where the use of %esp changes the encoding of
the instruction, it's cleaner to use TCG_REG_CALL_STACK instead of
TCG_REG_ESP.
Blue Swirl [Sat, 28 May 2011 07:13:05 +0000 (07:13 +0000)]
TCG: remove broken stack allocation for call arguments
The code for stack allocation for call arguments is way too simplistic
to actually work on targets with non-trivial stack allocation policies,
e.g. ppc64. We've also already allocated TCG_STATIC_CALL_ARGS_SIZE worth
of stack for calls which should be well more than any helper needs.
Remove broken dynamic stack allocation code and replace it with an assert.
Should dynamic stack allocation ever be needed again, target specific
functions should be added.
Blue Swirl [Mon, 16 May 2011 19:38:48 +0000 (19:38 +0000)]
x86: use caller supplied CPUState for interrupt related stuff
Several x86 specific functions are called from cpu-exec.c with the
assumption that global env register is valid. This will be changed
later, so make the functions use caller supplied CPUState parameter.
It would be cleaner to move the functions to helper.c, but there are
quite a lot of dependencies between do_interrupt() and other functions.
Add helpers for svm_check_intercept() and cpu_cc_compute_all() instead
of calling the helper (which uses global env, AREG0) directly.
Jan Kiszka [Thu, 23 Jun 2011 08:05:12 +0000 (10:05 +0200)]
Fix fallouts from Linux header inclusion
This is an all-in-one fix for the smaller and bigger mistakes of the
build system changes for accompanied Linux headers:
- only enable KVM and vhost on Linux hosts
- fix powerpc asm header symlink
- do not use Linux headers on non-Linux hosts
- fix kvmclock for !CONFIG_KVM
- fix s390 build on non-Linux hosts
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Andreas Färber <andreas.faerber@web.de> Tested-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Juan Quintela [Thu, 2 Jun 2011 01:53:44 +0000 (01:53 +0000)]
exec: last_first_tb was only used in !ONLY_USER case
Once there, use a better variable name.
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com> Acked-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Strip trailing '\n' from error_report()'s first argument
error_report() prepends location, and appends a newline. The message
constructed from the arguments should not contain a newline. Fix the
obvious offenders.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Peter Maydell [Fri, 3 Jun 2011 16:10:40 +0000 (17:10 +0100)]
configure: Don't create symlinks to nonexistent targets
When we create the symlinks to source tree files, don't create them
if the file is not actually present in the source tree; this will
happen if the file is in a git submodule that wasn't checked out.
This also avoids the odd effect where an in-source-tree configure
will end up creating the missing file as a symlink to itself.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Andreas Färber [Thu, 23 Jun 2011 14:24:45 +0000 (16:24 +0200)]
coreaudio: Fix OSStatus format specifier
OSStatus type is defined as SInt32. That's signed int on __LP64__ and
signed long otherwise.
Since it is an explicit 32-bit-width type, cast to corresponsing POSIX type
and use PRId32 format specifier. This avoids a warning on ppc64.
Cc: malc <av1474@comtv.ru> Signed-off-by: Andreas Faerber <andreas.faerber@web.de> Signed-off-by: malc <av1474@comtv.ru>
Andreas Färber [Thu, 23 Jun 2011 14:24:46 +0000 (16:24 +0200)]
coreaudio: Avoid formatting UInt32 type
coreaudioVoiceOut's audioDevicePropertyBufferFrameSize is defined as UInt32
and is being used by reference for AudioDevice{Get,Set}Property().
UInt32 is unsigned int on __LP64__ but unsigned long otherwise.
Cast to POSIX type and use PRIu32 format specifier to hide the details.
This avoids a warning on ppc64.
Cc: malc <av1474@comtv.ru> Signed-off-by: Andreas Faerber <andreas.faerber@web.de> Signed-off-by: malc <av1474@comtv.ru>
Peter Maydell [Fri, 20 May 2011 15:50:01 +0000 (16:50 +0100)]
net: Warn about "-net nic" options which were ignored
Diagnose the case where the user asked for a NIC via "-net nic"
but the board didn't instantiate that NIC (for example where the
user asked for two NICs but the board only supports one). Note
that this diagnostic doesn't apply to NICs created through -device,
because those are always instantiated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Fri, 20 May 2011 15:50:00 +0000 (16:50 +0100)]
net: Don't warn about the default network setup
Don't warn about the default network setup that you get if no command line
-net options are specified. There are two cases that we would otherwise
complain about:
(1) board doesn't support a NIC but the implicit "-net nic" requested one
(2) CONFIG_SLIRP not set, so the implicit "-net nic" sets up a nic that
isn't connected to anything
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Peter Maydell [Fri, 20 May 2011 15:49:59 +0000 (16:49 +0100)]
Revert "net: Improve the warnings for dubious command line option combinations"
This reverts commit f68b9d672b90dedc79aeb9b44607f484dbe46a6b.
That attempt at diagnosing unused -net nic options failed to account
for NICs created via -device; back it out cleanly in preparation
for implementing in a different manner.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Mon, 20 Jun 2011 08:12:47 +0000 (11:12 +0300)]
Optimize screendump
When running kvm-autotest, fputc() is often the second highest (sometimes #1)
function showing up in a profile. This is due to fputc() locking the file
for every byte written.
Optimize by buffering a line's worth of pixels and writing that out in a
single call.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andre Przywara [Fri, 10 Jun 2011 13:56:28 +0000 (15:56 +0200)]
KVM: Fix XSAVE feature bit enumeration
When iterating through the XSAVE feature enumeration CPUID leaf (0xD)
we should not stop at the first zero EAX, but instead keep scanning
since there are gaps in the enumeration (ECX=1 for instance).
This fixes the proper usage of AVX in KVM guests.
Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Wed, 8 Jun 2011 14:11:05 +0000 (16:11 +0200)]
kvm: x86: Pass KVMState to kvm_arch_get_supported_cpuid
kvm_arch_get_supported_cpuid checks for global cpuid restrictions, it
does not require any CPUState reference. Changing its interface allows
to call it before any VCPU is initialized.
Jan Kiszka [Wed, 8 Jun 2011 14:10:57 +0000 (16:10 +0200)]
Switch build system to accompanied kernel headers
This helps reducing our build-time checks for feature support in the
available Linux kernel headers. And it helps users that do not have
sufficiently recent headers installed on their build machine.
Consequently, the patch removes and build-time checks for kvm and vhost
in configure, the --kerneldir switch, and KVM_CFLAGS. Kernel headers are
supposed to be provided by QEMU only.
s390 needs some extra love as it carries redefinitions from kernel
headers.
CC: Alexander Graf <agraf@suse.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Wed, 8 Jun 2011 14:10:56 +0000 (16:10 +0200)]
Import kernel headers
These kernel headers and the COPYING file were automatically imported
from current Linux git, cb0a02ecf9 (post 3.0-rc2).
Licensing:
asm-powerpc GPLv2
asm-s390 GPLv2
asm-x86 Linux top-level license (GPLv2 with exception)
linux/kvm*: Linux top-level license (GPLv2 with exception)
linux/vhost: Linux top-level license (GPLv2 with exception)
linux/virtio*: 3-clause BSB
CC: Alexander Graf <agraf@suse.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Wed, 8 Jun 2011 16:22:17 +0000 (18:22 +0200)]
Add kernel header update script
This helper pulls the required kernel headers for KVM and vhost into a
specified directory. The update is triggered via
scripts/update-linux-headers.sh LINUX_PATH
and will place the output under linux-headers/linux and linux-headers/asm-*.
It also imports the COPYING to care for headers without an explicit license.
CC: Alexander Graf <agraf@suse.de> CC: Christoph Hellwig <hch@lst.de> CC: Peter Maydell <peter.maydell@linaro.org> CC: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Jan Kiszka [Wed, 15 Jun 2011 13:17:26 +0000 (15:17 +0200)]
kvm: x86: Save/restore FPU OP, IP and DP
These FPU states are properly maintained by KVM but not yet by TCG. So
far we unconditionally set them to 0 in the guest which may cause
state corruptions, though not with modern guests.
To avoid breaking backward migration, use a conditional subsection that
is only written if any of the three fields is non-zero. The guest's
FNINIT clears them frequently, and cleared IA32_MISC_ENABLE MSR[2]
reduces the probability of non-zero values further so that this
subsection is not expected to restrict migration in any common scenario.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Steven Smith [Thu, 16 Jun 2011 16:05:17 +0000 (17:05 +0100)]
xen: Add the Xen platform pci device
Introduce a new emulated PCI device, specific to fully virtualized Xen
guests. The device is necessary for PV on HVM drivers to work.
Signed-off-by: Steven Smith <ssmith@xensource.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
cirrus_vga: reset lfb_addr after a pci config write if the BAR is unmapped
If the cirrus_vga PCI BAR is unmapped than we should not only reset
map_addr but also lfb_addr, otherwise we'll keep trying to map
the old lfb_addr in map_linear_vram.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Use qemu_invalidate_entry in cpu_physical_memory_unmap.
Do not lock mapcache entries in qemu_get_ram_ptr if the address falls in
the ramblock with offset == 0. We don't need to do that because the
callers of qemu_get_ram_ptr either try to map an entire block, other
from the main ramblock, or until the end of a page to implement a single
read or write in the main ramblock.
If we don't lock mapcache entries in qemu_get_ram_ptr we don't need to
call qemu_invalidate_entry in qemu_put_ram_ptr anymore because we can
leave with few long lived block mappings requested by devices.
Also move the call to qemu_ram_addr_from_mapcache at the beginning of
qemu_ram_addr_from_host.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Introduce qemu_ram_ptr_length that takes an address and a size as
parameters rather than just an address.
Refactor cpu_physical_memory_map so that we call qemu_ram_ptr_length only
once rather than calling qemu_get_ram_ptr one time per page.
This is not only more efficient but also tries to simplify the logic of
the function.
Currently we are relying on the fact that all the pages are mapped
contiguously in qemu's address space: we have a check to make sure that
the virtual address returned by qemu_get_ram_ptr from the second call on
is consecutive. Now we are making this more explicit replacing all the
calls to qemu_get_ram_ptr with a single call to qemu_ram_ptr_length
passing a size argument.
xen: fix qemu_map_cache with size != MCACHE_BUCKET_SIZE
Fix the implementation of qemu_map_cache: correctly support size
arguments different from 0 or MCACHE_BUCKET_SIZE.
The new implementation supports locked mapcache entries with size
multiple of MCACHE_BUCKET_SIZE. qemu_invalidate_entry can correctly
find and unmap these "large" mapcache entries given that the virtual
address passed to qemu_invalidate_entry is the same returned by
qemu_map_cache when the locked mapcache entry was created.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Jan Kiszka [Tue, 14 Jun 2011 16:29:45 +0000 (18:29 +0200)]
Reset system before loadvm
In case we load the vmstate during incoming migration, we start from a
clean, default machine state as we went through system reset before. But
if we load from a snapshot, the machine can be in any state. That can
cause troubles if loading an older image which does not carry all state
information the executing QEMU requires. Hardly any device takes care of
this scenario.
However, fixing this is trivial. We just need to issue a system reset
during loadvm as well.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Jan Kiszka [Tue, 14 Jun 2011 16:29:43 +0000 (18:29 +0200)]
Allow silent system resets
This allows qemu_system_reset to be issued silently for internal
purposes, ie. without sending out a monitor event. Convert the system
reset after startup to the silent mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Stefan Weil [Mon, 13 Jun 2011 21:01:53 +0000 (23:01 +0200)]
error framework: Fix compilation for w32/w64
The declaration of function error_set() should use macro GCC_FMT_ATTR
instead of gcc's format printf attribute.
For w32/w64, both declarations are different and GCC_FMT_ATTR is needed.
Compilation for w64 even failed with the original code because mingw64
defines a macro for printf.
GCC_FMT_ATTR requires qemu-common.h, so add it in error.c
(it's also included by error_int.h but too late).
Remove assert.h which is included by qemu-common.h.
Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Peter Maydell [Thu, 26 May 2011 16:34:11 +0000 (17:34 +0100)]
hw/9118.c: Implement active-low interrupt support
The 9118 ethernet controller interrupt line is active low unless
the IRQ config register is programmed to set both the IRQ_POL
(polarity: active-high) and IRQ_TYPE (type: push-pull) bits:
implement support for inverting the irq output in other configurations.
This also requires that we support setting the bits in the first
place, and that we correctly preserve them across software reset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Andreas Färber [Thu, 2 Jun 2011 17:58:06 +0000 (19:58 +0200)]
Introduce format string for pid_t
BeOS and Haiku on i386 use long for 32-bit types, including pid_t.
Using %d with pid_t therefore results in a warning.
Unfortunately POSIX:2008 does not define a PRId* string for pid_t.
In some places pid_t was previously casted to long and %ld hardcoded.
The predecessor of this patch added another upcast for the simpletrace
filename but was not applied to date.
Since new uses of pid_t with %d keep creeping in, let's instead define
an OS-dependent format string and use that consistently.
Cc: Stefan Hajnoczi <stefanha@gmail.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Ingo Weinhold <ingo_weinhold@gmx.de> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Juha Riihimäki [Tue, 31 May 2011 16:48:23 +0000 (17:48 +0100)]
smc91c111: qdevify reset
Register the smc91c111 reset function as a qdev reset function.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Wed, 15 Jun 2011 18:31:56 +0000 (18:31 +0000)]
Merge branch 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber
* 'cocoa-for-upstream' of git://repo.or.cz/qemu/afaerber:
Darwin: Fix compilation warning regarding the deprecated daemon() function
cocoa: Avoid warning related to multiple handleEvent: definitions
cocoa: Revert dependency on VNC
cocoa: Provide central qemu_main() prototype
Fix libfdt warnings on Darwin
configure: Fix check for fdatasync()
Remove warning in printf due to type mismatch
Cocoa: avoid displaying window when command-line contains '-h' or '-help'
Fix compilation warning due to incorrectly specified type
cocoa: do not create a spurious window for -version
Command line support for altering the log file location
Add command line support for logging to a location other than /tmp/qemu.log.
With logging enabled (command line option -d), the log is written to
the hard-coded path /tmp/qemu.log. This patch adds support for writing
the log to a different location by passing the -D option.
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Kevin Wolf [Tue, 7 Jun 2011 15:51:21 +0000 (17:51 +0200)]
Allow nested qemu_bh_poll() after BH deletion
Without this, qemu segfaults when a BH handler first deletes its BH and
then calls another function which involves a nested qemu_bh_poll() call.
This can be reproduced by generating an I/O error (e.g. with blkdebug) on
an IDE device and using rerror/werror=stop to stop the VM. When continuing
the VM, qemu segfaults.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Kevin Wolf [Fri, 10 Jun 2011 14:32:13 +0000 (16:32 +0200)]
ide: Clear error_status after restarting flush
Clearing the error status flag was missing for restarting flushes. Now that the
error status is separate from the BM status register, we can simply set it to 0
after restarting the request. This ensures that we never forget to clear a bit.
Make dma_bdrv_io available for drivers, and pass an explicit I/O function
instead of hardcoding bdrv_aio_readv/bdrv_aio_writev. This is required
to implement non-READ/WRITE dma commands in the ide driver, e.g. the
upcoming TRIM support.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
projects / qemu-xen.git / log