Neil Berrington reported a double-fault on a VM with 768GB of RAM that uses
large amounts of vmalloc space with PTI enabled.
The cause is that load_new_mm_cr3() was never fixed to take the 5-level pgd
folding code into account, so, on a 4-level kernel, the pgd synchronization
logic compiles away to exactly nothing.
Interestingly, the problem doesn't trigger with nopti. I assume this is
because the kernel is mapped with global pages if we boot with nopti. The
sequence of operations when we create a new task is that we first load its
mm while still running on the old stack (which crashes if the old stack is
unmapped in the new mm unless the TLB saves us), then we call
prepare_switch_to(), and then we switch to the new stack.
prepare_switch_to() pokes the new stack directly, which will populate the
mapping through vmalloc_fault(). I assume that we're getting lucky on
non-PTI systems -- the old stack's TLB entry stays alive long enough to
make it all the way through prepare_switch_to() and switch_to() so that we
make it to a valid stack.
Fixes: b50858ce3e2a ("x86/mm/vmalloc: Add 5-level paging support") Reported-and-tested-by: Neil Berrington <neil.berrington@datacore.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Borislav Petkov <bp@alien8.de> Link: https://lkml.kernel.org/r/346541c56caed61abbe693d7d2742b4a380c5001.1516914529.git.luto@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 24c2503255d3 ("x86/microcode: Do not access the initrd after it has
been freed") fixed attempts to access initrd from the microcode loader
after it has been freed. However, a similar KASAN warning was reported
(stack trace edited):
smpboot: Booting Node 0 Processor 1 APIC 0x11
==================================================================
BUG: KASAN: use-after-free in find_cpio_data+0x9b5/0xa50
Read of size 1 at addr ffff880035ffd000 by task swapper/1/0
After some investigation, it turned out that a merge was done using the
wrong side to resolve, leading to picking up the previous state, before
the 24c2503255d3 fix. Therefore the Fixes tag below contains a merge
commit.
Revert the mismerge by catching the save_microcode_in_initrd_amd()
retval and thus letting the function exit with the last return statement
so that initrd_gone can be set to true.
Commit b94b73733171 ("x86/microcode/intel: Extend BDW late-loading with a
revision check") reduced the impact of erratum BDF90 for Broadwell model
79.
The impact can be reduced further by checking the size of the last level
cache portion per core.
Tony: "The erratum says the problem only occurs on the large-cache SKUs.
So we only need to avoid the update if we are on a big cache SKU that is
also running old microcode."
For more details, see erratum BDF90 in document #334165 (Intel Xeon
Processor E7-8800/4800 v4 Product Family Specification Update) from
September 2017.
Fixes: b94b73733171 ("x86/microcode/intel: Extend BDW late-loading with a revision check") Signed-off-by: Jia Zhang <zhang.jia@linux.alibaba.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1516321542-31161-1-git-send-email-zhang.jia@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
with the introduction of commit b0eb57cb97e7837ebb746404c2c58c6f536f23fa, it appears that rq->buf_info
is improperly handled. While it is heap allocated when an rx queue is
setup, and freed when torn down, an old line of code in
vmxnet3_rq_destroy was not properly removed, leading to rq->buf_info[0]
being set to NULL prior to its being freed, causing a memory leak, which
eventually exhausts the system on repeated create/destroy operations
(for example, when the mtu of a vmxnet3 interface is changed
frequently.
Fix is pretty straight forward, just move the NULL set to after the
free.
Tested by myself with successful results
Applies to net, and should likely be queued for stable, please
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-By: boyang@redhat.com CC: boyang@redhat.com CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: David S. Miller <davem@davemloft.net> Acked-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu
versions of route lookup") broke "ip route get" in the presence
of rules that specify iif lo.
Host-originated traffic always has iif lo, because
ip_route_output_key_hash and ip6_route_output_flags set the flow
iif to LOOPBACK_IFINDEX. Thus, putting "iif lo" in an ip rule is a
convenient way to select only originated traffic and not forwarded
traffic.
inet_rtm_getroute used to match these rules correctly because
even though it sets the flow iif to 0, it called
ip_route_output_key which overwrites iif with LOOPBACK_IFINDEX.
But now that it calls ip_route_output_key_hash_rcu, the ifindex
will remain 0 and not match the iif lo in the rule. As a result,
"ip route get" will return ENETUNREACH.
Fixes: 3765d35ed8b9 ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Tested: https://android.googlesource.com/kernel/tests/+/master/net/test/multinetwork_test.py passes again Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current code copies directly from userspace to ctx->crypto_send, but
doesn't always reinitialize it to 0 on failure. This causes any
subsequent attempt to use this setsockopt to fail because of the
TLS_CRYPTO_INFO_READY check, eventhough crypto_info is not actually
ready.
This should result in a correctly set up socket after the 3rd call, but
currently it does not:
During setsockopt(SOL_TCP, TLS_TX), if initialization of the software
context fails in tls_set_sw_offload(), we leak sw_ctx. We also don't
reassign ctx->priv_ctx to NULL, so we can't even do another attempt to
set it up on the same socket, as it will fail with -EEXIST.
Fixes: 3c4d7559159b ('tls: kernel TLS support') Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Calling accept on a TCP socket with a TLS ulp attached results
in two sockets that share the same ulp context.
The ulp context is freed while a socket is destroyed, so
after one of the sockets is released, the second second will
trigger a use after free when it tries to access the ulp context
attached to it.
We restrict the TLS ulp to sockets in ESTABLISHED state
to prevent the scenario above.
Fixes: 3c4d7559159b ("tls: kernel TLS support") Reported-by: syzbot+904e7cd6c5c741609228@syzkaller.appspotmail.com Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move up the extack reset/initialization in netlink_rcv_skb, so that
those 'goto ack' will not skip it. Otherwise, later on netlink_ack
may use the uninitialized extack and cause kernel crash.
Fixes: cbbdf8433a5f ("netlink: extack needs to be reset each time through loop") Reported-by: syzbot+03bee3680a37466775e7@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sts variable is holding link speed as well as state. We should
be using ls to index into ls_to_ethtool.
Fixes: 265aeb511bd5 ("nfp: add support for .get_link_ksettings()") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Helmut reported a bug about division by zero while
running traffic and doing physical cable pull test.
When the cable unplugged the ppms become zero, so when
dividing the current ppms by the previous ppms in the
next dim iteration there is division by zero.
This patch prevent this division for both ppms and epms.
Fixes: c3164d2fc48f ("net/mlx5e: Added BW check for DIM decision mechanism") Reported-by: Helmut Grauer <helmut.grauer@de.ibm.com> Signed-off-by: Talat Batheesh <talatb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot triggered the WARN_ON in netlink_ack testing the bad_attr value.
The problem is that netlink_rcv_skb loops over the skb repeatedly invoking
the callback and without resetting the extack leaving potentially stale
data. Initializing each time through avoids the WARN_ON.
Fixes: 2d4bc93368f5a ("netlink: extended ACK reporting") Reported-by: syzbot+315fa6766d0f7c359327@syzkaller.appspotmail.com Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After introducing sctp_stream structure, sctp uses stream->outcnt as the
out stream nums instead of c.sinit_num_ostreams.
However when users use sinit in cmsg, it only updates c.sinit_num_ostreams
in sctp_sendmsg. At that moment, stream->outcnt is still using previous
value. If it's value is not updated, the sinit_num_ostreams of sinit could
not really work.
This patch is to fix it by updating stream->outcnt and reiniting stream
if stream outcnt has been change by sinit in sendmsg.
Fixes: a83863174a61 ("sctp: prepare asoc stream for stream reconf") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot reported yet another crash [1] that is caused by
insufficient validation of DODGY packets.
Two bugs are happening here to trigger the crash.
1) Flow dissection leaves with incorrect thoff field.
2) skb_probe_transport_header() sets transport header to this invalid
thoff, even if pointing after skb valid data.
3) qdisc_pkt_len_init() reads out-of-bound data because it
trusts tcp_hdrlen(skb)
Possible fixes :
- Full flow dissector validation before injecting bad DODGY packets in
the stack.
This approach was attempted here : https://patchwork.ozlabs.org/patch/
861874/
- Have more robust functions in the core.
This might be needed anyway for stable versions.
Fixes: 34fad54c2537 ("net: __skb_flow_dissect() must cap its return value") Fixes: a6e544b0a88b ("flow_dissector: Jump to exit code in __skb_flow_dissect") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tfile->tun could be detached before we close the tun fd,
via tun_detach_all(), so it should not be used to check for
tfile->tx_array.
As Jason suggested, we probably have to clean it up
unconditionally both in __tun_deatch() and tun_detach_all(),
but this requires to check if it is initialized or not.
Currently skb_array_cleanup() doesn't have such a check,
so I check it in the caller and introduce a helper function,
it is a bit ugly but we can always improve it in net-next.
Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 1576d9860599 ("tun: switch to use skb array for tx") Cc: Jason Wang <jasowang@redhat.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver periodically samples all neighbors configured in device
in order to update the kernel regarding their state. When finding
an entry configured in HW that doesn't show in neigh_lookup()
driver logs an error message.
This introduces a race when removing multiple neighbors -
it's possible that a given entry would still be configured in HW
as its removal is still being processed but is already removed
from the kernel's neighbor tables.
Simply remove the error message and gracefully accept such events.
Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Fixes: 60f040ca11b9 ("mlxsw: spectrum_router: Periodically dump active IPv6 neighbours") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Validate gso_type during segmentation as SKB_GSO_DODGY sources
may pass packets where the gso_type does not match the contents.
Syzkaller was able to enter the SCTP gso handler with a packet of
gso_type SKB_GSO_TCPV4.
On entry of transport layer gso handlers, verify that the gso_type
matches the transport protocol.
Fixes: 90017accff61 ("sctp: Add GSO support") Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com> Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b05229f44228 ("gre6: Cleanup GREv6 transmit path,
call common GRE functions") moved dev->mtu initialization
from ip6gre_tunnel_setup() to ip6gre_tunnel_init(), as a
result, the previously set values, before ndo_init(), are
reset in the following cases:
* rtnl_create_link() can update dev->mtu from IFLA_MTU
parameter.
* ip6gre_tnl_link_config() is invoked before ndo_init() in
netlink and ioctl setup, so ndo_init() can reset MTU
adjustments with the lower device MTU as well, dev->mtu
and dev->hard_header_len.
Not applicable for ip6gretap because it has one more call
to ip6gre_tnl_link_config(tunnel, 1) in ip6gre_tap_init().
Fix the first case by updating dev->mtu with 'tb[IFLA_MTU]'
parameter if a user sets it manually on a device creation,
and fix the second one by moving ip6gre_tnl_link_config()
call after register_netdevice().
Fixes: b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Fixes: db2ec95d1ba4 ("ip6_gre: Fix MTU setting") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 622190669403 ("be2net: Request RSS capability of Rx interface
depending on number of Rx rings") modified be_update_queues() so the
IFACE (HW representation of the netdevice) is destroyed and then
re-created. This causes a regression because potential promiscuous mode
is not restored properly during be_open() because the driver thinks
that the HW has promiscuous mode already enabled.
Note that Lancer is not affected by this bug because RX-filter flags are
disabled during be_close() for this chipset.
Cc: Sathya Perla <sathya.perla@broadcom.com> Cc: Ajit Khaparde <ajit.khaparde@broadcom.com> Cc: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Cc: Somnath Kotur <somnath.kotur@broadcom.com> Fixes: 622190669403 ("be2net: Request RSS capability of Rx interface depending on number of Rx rings") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ppp_dev_uninit(), which is the .ndo_uninit() handler of PPP devices,
needs to lock pn->all_ppp_mutex. Therefore we mustn't call
register_netdevice() with pn->all_ppp_mutex already locked, or we'd
deadlock in case register_netdevice() fails and calls .ndo_uninit().
Fortunately, we can unlock pn->all_ppp_mutex before calling
register_netdevice(). This lock protects pn->units_idr, which isn't
used in the device registration process.
However, keeping pn->all_ppp_mutex locked during device registration
did ensure that no device in transient state would be published in
pn->units_idr. In practice, unlocking it before calling
register_netdevice() doesn't change this property: ppp_unit_register()
is called with 'ppp_mutex' locked and all searches done in
pn->units_idr hold this lock too.
Fixes: 8cb775bc0a34 ("ppp: fix device unregistration upon netns deletion") Reported-and-tested-by: syzbot+367889b9c9e279219175@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mlx5_get_vector_affinity used to call pci_irq_get_affinity and after
reverting the patch that sets the device affinity via PCI_IRQ_AFFINITY
API, calling pci_irq_get_affinity becomes useless and it breaks RDMA
mlx5 users. To fix this, this patch provides an alternative way to
retrieve IRQ vector affinity using legacy IRQ API, following
smp_affinity read procfs implementation.
There are systems platform information management interfaces (such as
HOST2BMC) for which we cannot disable local loopback multicast traffic.
Separate disable_local_lb_mc and disable_local_lb_uc capability bits so
driver will not disable multicast loopback traffic if not supported.
(It is expected that Firmware will not set disable_local_lb_mc if
HOST2BMC is running for example.)
Function mlx5_nic_vport_update_local_lb will do best effort to
disable/enable UC/MC loopback traffic and return success only in case it
succeeded to changed all allowed by Firmware.
Adapt mlx5_ib and mlx5e to support the new cap bits.
Fixes: 2c43c5a036be ("net/mlx5e: Enable local loopback in loopback selftest") Fixes: c85023e153e3 ("IB/mlx5: Add raw ethernet local loopback support") Fixes: bded747bb432 ("net/mlx5: Add raw ethernet local loopback firmware command") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Cc: kernel-team@fb.com Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit cea0cc80a677 ("sctp: use the right sk after waking up from
wait_buf sleep"), it may change to lock another sk if the asoc has been
peeled off in sctp_wait_for_sndbuf.
However, the asoc's new sk could be already closed elsewhere, as it's in
the sendmsg context of the old sk that can't avoid the new sk's closing.
If the sk's last one refcnt is held by this asoc, later on after putting
this asoc, the new sk will be freed, while under it's own lock.
This patch is to revert that commit, but fix the old issue by returning
error under the old sk's lock.
Fixes: cea0cc80a677 ("sctp: use the right sk after waking up from wait_buf sleep") Reported-by: syzbot+ac6ea7baa4432811eb50@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The check in sctp_sockaddr_af is not robust enough to forbid binding a
v4mapped v6 addr on a v4 socket.
The worse thing is that v4 socket's bind_verify would not convert this
v4mapped v6 addr to a v4 addr. syzbot even reported a crash as the v4
socket bound a v6 addr.
This patch is to fix it by doing the common sa.sa_family check first,
then AF_INET check for v4mapped v6 addrs.
Fixes: 7dab83de50c7 ("sctp: Support ipv6only AF_INET6 sockets.") Reported-by: syzbot+7b7b518b1228d2743963@syzkaller.appspotmail.com Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hardware statistics retrieval hurts in tight invocation loops.
Avoid extraneous write and enforce strict ordering of writes targeted to
the tally counters dump area address registers.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom
was probably fine before the introduction of ->needed_headroom in
commit f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom").
But now, virtual devices typically advertise the size of their overhead
in dev->needed_headroom, so we must also take it into account in
skb_reserve().
Allocation size of skb is also updated to take dev->needed_tailroom
into account and replace the arbitrary 32 bytes with the real size of
a PPPoE header.
This issue was discovered by syzbot, who connected a pppoe socket to a
gre device which had dev->header_ops->create == ipgre_header and
dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any
headroom, and dev_hard_header() crashed when ipgre_header() tried to
prepend its header to skb->data.
Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like
interfaces, but reserving space for ->needed_headroom is a more
fundamental issue that needs to be addressed first.
Same problem exists for __pppoe_xmit(), which also needs to take
dev->needed_headroom into account in skb_cow_head().
Fixes: f5184d267c1a ("net: Allow netdevices to specify needed head/tailroom") Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sukumar reported that sends to the local broadcast address
(255.255.255.255) are broken. Check for the address in vrf driver
and do not redirect to the VRF device - similar to multicast
packets.
With this change sockets can use SO_BINDTODEVICE to specify an
egress interface and receive responses. Note: the egress interface
can not be a VRF device but needs to be the enslaved device.
Reported-by: Sukumar Gopalakrishnan <sukumarg1973@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sendfile() calls can hang endless with using Kernel TLS if a socket error occurs.
Socket error codes must be inverted by Kernel TLS before returning because
they are stored with positive sign. If returned non-inverted they are
interpreted as number of bytes sent, causing endless looping of the
splice mechanic behind sendfile().
Signed-off-by: Robert Hering <r.hering@avm.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a tcp socket is closed, if it detects that its net namespace is
exiting, close immediately and do not wait for FIN sequence.
For normal sockets, a reference is taken to their net namespace, so it will
never exit while the socket is open. However, kernel sockets do not take a
reference to their net namespace, so it may begin exiting while the kernel
socket is still open. In this case if the kernel socket is a tcp socket,
it will stay open trying to complete its close sequence. The sock's dst(s)
hold a reference to their interface, which are all transferred to the
namespace's loopback interface when the real interfaces are taken down.
When the namespace tries to take down its loopback interface, it hangs
waiting for all references to the loopback interface to release, which
results in messages like:
unregister_netdevice: waiting for lo to become free. Usage count = 1
These messages continue until the socket finally times out and closes.
Since the net namespace cleanup holds the net_mutex while calling its
registered pernet callbacks, any new net namespace initialization is
blocked until the current net namespace finishes exiting.
After this change, the tcp socket notices the exiting net namespace, and
closes immediately, releasing its dst(s) and their reference to the
loopback interface, which lets the net namespace continue exiting.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811 Signed-off-by: Dan Streetman <ddstreet@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Without proper validation of DODGY packets, we might very well
feed qdisc_pkt_len_init() with invalid GSO packets.
tcp_hdrlen() might access out-of-bound data, so let's use
skb_header_pointer() and proper checks.
Whole story is described in commit d0c081b49137 ("flow_dissector:
properly cap thoff field")
We have the goal of validating DODGY packets earlier in the stack,
so we might very well revert this fix in the future.
Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Jason Wang <jasowang@redhat.com> Reported-by: syzbot+9da69ebac7dddd804552@syzkaller.appspotmail.com Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit "net: igmp: Use correct source address on IGMPv3 reports"
introduced a check to validate the source address of locally generated
IGMPv3 packets.
Instead of checking the local interface address directly, it uses
inet_ifa_match(fl4->saddr, ifa), which checks if the address is on the
local subnet (or equal to the point-to-point address if used).
This breaks for point-to-point interfaces, so check against
ifa->ifa_local directly.
Cc: Kevin Cernekee <cernekee@chromium.org> Fixes: a46182b00290 ("net: igmp: Use correct source address on IGMPv3 reports") Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix initialize the uninitialized tx_qlen to an appropriate value when USB
Full Speed is used.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In my last patch, I missed fact that cork.base.dst was not initialized
in ip6_make_skb() :
If ip6_setup_cork() returns an error, we might attempt a dst_release()
on some random pointer.
Fixes: 862c03ee1deb ("ipv6: fix possible mem leaks in ipv6_make_skb()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The logic in __ip6_append_data() assumes that the MTU is at least large
enough for the headers. A device's MTU may be adjusted after being
added while sendmsg() is processing data, resulting in
__ip6_append_data() seeing any MTU. For an mtu smaller than the size of
the fragmentation header, the math results in a negative 'maxfraglen',
which causes problems when refragmenting any previous skb in the
skb_write_queue, leaving it possibly malformed.
Instead sendmsg returns EINVAL when the mtu is calculated to be less
than IPV6_MIN_MTU.
Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Mike Maloney <maloney@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 513674b5a2c9 ("net: reevalulate autoflowlabel setting after
sysctl setting") removed the initialisation of
ipv6_pinfo::autoflowlabel and added a second flag to indicate
whether this field or the net namespace default should be used.
The getsockopt() handling for this case was not updated, so it
currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is
not explicitly enabled. Fix it to return the effective value, whether
that has been set at the socket or net namespace level.
Fixes: 513674b5a2c9 ("net: reevalulate autoflowlabel setting after sysctl ...") Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ccid2_hc_tx_rto_expire() timer callback always restarts the timer
again and can run indefinitely (unless it is stopped outside), and after
commit 120e9dabaf55 ("dccp: defer ccid_hc_tx_delete() at dismantle time"),
which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from
dccp_destroy_sock() to sk_destruct(), this started to happen quite often.
The timer prevents releasing the socket, as a result, sk_destruct() won't
be called.
Found with LTP/dccp_ipsec tests running on the bonding device,
which later couldn't be unloaded after the tests were completed:
unregister_netdevice: waiting for bond0 to become free. Usage count = 148
Fixes: 2a91aa396739 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Map all lookup neigh keys to INADDR_ANY for loopback/point-to-point devices
to avoid making an entry for every remote ip the device needs to talk to.
This used the be the old behavior but became broken in a263b3093641f
(ipv4: Make neigh lookups directly in output packet path) and later removed
in 0bb4087cbec0 (ipv4: Fix neigh lookup keying over loopback/point-to-point
devices) because it was broken.
Signed-off-by: Jim Westfall <jwestfall@surrealistic.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use n->primary_key instead of pkey to account for the possibility that a neigh
constructor function may have modified the primary_key value.
Signed-off-by: Jim Westfall <jwestfall@surrealistic.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When saving BOs in the hang state we skip one entry of the
kernel_state->bo[] array, thus leaving it to NULL. This leads to a NULL
pointer dereference when, later in this function, we iterate over all
BOs to check their ->madv state.
Fixes: ca26d28bbaa3 ("drm/vc4: improve throughput by pipelining binning and rendering jobs") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180118145821.22344-1-boris.brezillon@free-electrons.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per 90caccdd8cc0 ("bpf: fix bpf_tail_call() x64 JIT"), the index used
for array lookup is defined to be 32-bit wide. Update a misleading
comment that suggests it is 64-bit wide.
Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When an eBPF program tail-calls another eBPF program, it enters it after
the prologue to avoid having complex stack manipulations. This can lead
to kernel oopses, and similar.
Resolve this by always using a fixed stack layout, a CPU register frame
pointer, and using this when reloading registers before returning.
Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The stack layout documentation incorrectly suggests that the BPF JIT
scratch space starts immediately below BPF_FP. This is not correct,
so let's fix the documentation to reflect reality.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per 2dede2d8e925 ("ARM EABI: stack pointer must be 64-bit aligned
after a CPU exception") the stack should be aligned to a 64-bit boundary
on EABI systems. Ensure that the eBPF JIT appropraitely aligns the
stack.
Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ARM assembler for the tail call in this case ends up branching to
instruction 14 instead of instruction 13, resulting in the BPF filter
returning a non-zero value:
For other sequences, the tail call could end up branching midway through
the following BPF instructions, or maybe off the end of the function,
leading to unknown behaviours.
Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid the 'bx' instruction on CPUs that have no support for Thumb and
thus do not implement this instruction by moving the generation of this
opcode to a separate function that selects between:
bx reg
and
mov pc, reg
according to the capabilities of the CPU.
Fixes: 39c13c204bb1 ("arm: eBPF JIT compiler") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After do_readv_writev, the inode cache is invalidated anyway, so i_size
will never be read. It will be fetched from the server which will also
know about updates from other machines.
Fixes deadlock on 32-bit SMP.
See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2
Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mike Marshall <hubcap@omnibond.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some parts of the cmma migration bitmap is already protected
with the kvm->lock (e.g. the migration start). On the other
hand the read of the cmma bits is not protected against a
concurrent free, neither is the emulation of the ESSA instruction.
Let's extend the locking to all related ioctls by using
the slots lock for
- kvm_s390_vm_start_migration
- kvm_s390_vm_stop_migration
- kvm_s390_set_cmma_bits
- kvm_s390_get_cmma_bits
In addition to that, we use synchronize_srcu before freeing
the migration structure as all users hold kvm->srcu for read.
(e.g. the ESSA handler).
Reported-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 190df4a212a7 (KVM: s390: CMMA tracking, ESSA emulation, migration mode) Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In fixing the readdir+pagefault deadlock I accidentally introduced a
stale entry regression in readdir. If we get close to full for the
temporary buffer, and then skip a few delayed deletions, and then try to
add another entry that won't fit, we will emit the entries we found and
retry. Unfortunately we delete entries from our del_list as we find
them, assuming we won't need them. However our pos will be with
whatever our last entry was, which could be before the delayed deletions
we skipped, so the next search will add the deleted entries back into
our readdir buffer. So instead don't delete entries we find in our
del_list so we can make sure we always find our delayed deletions. This
is a slight perf hit for readdir with lots of pending deletions, but
hopefully this isn't a common occurrence. If it is we can revist this
and optimize it.
Fixes: 23b5ec74943f ("btrfs: fix readdir deadlock with pagefault") Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The newer trackpoints from ALPS, Elan and NXP implement a very limited
subset of extended commands and controls that the original trackpoints
implemented, so we should not be exposing not working controls in sysfs.
The newer trackpoints also do not implement "Power On Reset" or "Read
Extended Button Status", so we should not be using these commands during
initialization.
While we are at it, let's change "unsigned char" to u8 for byte data or
bool for booleans and use better suited error codes instead of -1.
Lenovo introduced trackpoint compatible sticks with minimum PS/2 commands.
They supposed to reply with 0x02, 0x03, or 0x04 in response to the
"Read Extended ID" command, so we would know not to try certain extended
commands. Unfortunately even some trackpoints reporting the original IBM
version (0x01 firmware 0x0e) now respond with incorrect data to the "Get
Extended Buttons" command:
Adds support for the current lineup of Xbox One controllers from PDP
(Performance Designed Products). These controllers are very picky with
their initialization sequence and require an additional 2 packets before
they send any input reports.
Turns out distros do not want to make retpoline as part of their "ABI",
so this patch should not have been merged. Sorry Andi, this was my
fault, I suggested it when your original patch was the "correct" way of
doing this instead.
Reported-by: Jiri Kosina <jikos@kernel.org> Fixes: 6cfb521ac0d5 ("module: Add retpoline tag to VERMAGIC") Acked-by: Andi Kleen <ak@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: rusty@rustcorp.com.au Cc: arjan.van.de.ven@intel.com Cc: jeyu@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We need to run xfrm_resolve_and_create_bundle() with
bottom halves off. Otherwise we may reuse an already
released dst_enty when the xfrm lookup functions are
called from process context.
Fixes: c30d78c14a813db39a647b6a348b428 ("xfrm: add xdst pcpu cache") Reported-by: Darius Ski <darius.ski@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: David Miller <davem@davemloft.net>, Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The capability check in nfnetlink_rcv() verifies that the caller
has CAP_NET_ADMIN in the namespace that "owns" the netlink socket.
However, xt_osf_fingers is shared by all net namespaces on the
system. An unprivileged user can create user and net namespaces
in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable()
check:
vpnns -- nfnl_osf -f /tmp/pf.os
vpnns -- nfnl_osf -f /tmp/pf.os -d
These non-root operations successfully modify the systemwide OS
fingerprint list. Add new capable() checks so that they can't.
Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The capability check in nfnetlink_rcv() verifies that the caller
has CAP_NET_ADMIN in the namespace that "owns" the netlink socket.
However, nfnl_cthelper_list is shared by all net namespaces on the
system. An unprivileged user can create user and net namespaces
in which he holds CAP_NET_ADMIN to bypass the netlink_net_capable()
check:
Since commit 97a16fc82a7c ("mm, page_alloc: only enforce watermarks for
order-0 allocations"), __zone_watermark_ok() check for high-order
allocations will shortcut per-migratetype free list checks for
ALLOC_HARDER allocations, and return true as long as there's free page
of any migratetype. The intention is that ALLOC_HARDER can allocate
from MIGRATE_HIGHATOMIC free lists, while normal allocations can't.
However, as a side effect, the watermark check will then also return
true when there are pages only on the MIGRATE_ISOLATE list, or (prior to
CMA conversion to ZONE_MOVABLE) on the MIGRATE_CMA list. Since the
allocation cannot actually obtain isolated pages, and might not be able
to obtain CMA pages, this can result in a false positive.
The condition should be rare and perhaps the outcome is not a fatal one.
Still, it's better if the watermark check is correct. There also
shouldn't be a performance tradeoff here.
Link: http://lkml.kernel.org/r/20171102125001.23708-1-vbabka@suse.cz Fixes: 97a16fc82a7c ("mm, page_alloc: only enforce watermarks for order-0 allocations") Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Rik van Riel <riel@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In orangefs_devreq_read, there is a loop which picks an op off the list
of pending ops. If the loop fails to find an op, there is nothing to
read, and it returns EAGAIN. If the op has been given up on, the loop
is restarted via a goto. The bug is that the variable which the found
op is written to is not reinitialized, so if there are no more eligible
ops on the list, the code runs again on the already handled op.
This is triggered by interrupting a process while the op is being copied
to the client-core. It's a fairly small window, but it's there.
Since commit aef9a7bd9b67 ("serial/uart/8250: Add tunable RX interrupt
trigger I/F of FIFO buffers"), the port's default FCR value isn't used
in serial8250_do_set_termios anymore, but copied over once in
serial8250_config_port and then modified as needed.
Unfortunately, serial8250_config_port will never be called if the port
is shared between kernel and userspace, and the port's flag doesn't have
UPF_BOOT_AUTOCONF, which would trigger a serial8250_config_port as well.
This causes garbled output from userspace:
[ 5.220000] random: procd urandom read with 49 bits of entropy available
ers
[kee
Fix this by forcing it to be configured on boot, resulting in the
expected output:
[ 5.250000] random: procd urandom read with 50 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
Short fragmented packets may never be sent by the hardware when padding
is disabled. This patch stop modifying the GMAC padding bits, to leave
them to their reset value (disabled).
Fixes: 3919357fb0bb ("net: mvpp2: initialize the GMAC when using a port") Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message] Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tetsuo reported random crashes under memory pressure on 32-bit x86
system and tracked down to change that introduced
page_vma_mapped_walk().
The root cause of the issue is the faulty pointer math in check_pte().
As ->pte may point to an arbitrary page we have to check that they are
belong to the section before doing math. Otherwise it may lead to weird
results.
It wasn't noticed until now as mem_map[] is virtually contiguous on
flatmem or vmemmap sparsemem. Pointer arithmetic just works against all
'struct page' pointers. But with classic sparsemem, it doesn't because
each section memap is allocated separately and so consecutive pfns
crossing two sections might have struct pages at completely unrelated
addresses.
Let's restructure code a bit and replace pointer arithmetic with
operations on pfns.
Some issues have been reported with the for loop in stop_this_cpu() that
issues the 'wbinvd; hlt' sequence. Reverting this sequence to halt()
has been shown to resolve the issue.
However, the wbinvd is needed when running with SME. The reason for the
wbinvd is to prevent cache flush races between encrypted and non-encrypted
entries that have the same physical address. This can occur when
kexec'ing from memory encryption active to inactive or vice-versa. The
important thing is to not have outside of kernel text memory references
(such as stack usage), so the usage of the native_*() functions is needed
since these expand as inline asm sequences. So instead of reverting the
change, rework the sequence.
Move the wbinvd instruction outside of the for loop as native_wbinvd()
and make its execution conditional on X86_FEATURE_SME. In the for loop,
change the asm 'wbinvd; hlt' sequence back to a halt sequence but use
the native_halt() call.
Fixes: bba4ed011a52 ("x86/mm, kexec: Allow kexec to be used with SME") Reported-by: Dave Young <dyoung@redhat.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Dave Young <dyoung@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yu Chen <yu.c.chen@intel.com> Cc: Baoquan He <bhe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: kexec@lists.infradead.org Cc: ebiederm@redhat.com Cc: Borislav Petkov <bp@alien8.de> Cc: Rui Zhang <rui.zhang@intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Link: https://lkml.kernel.org/r/20180117234141.21184.44067.stgit@tlendack-t1.amdoffice.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since indirect jump instructions will be replaced by jump
to __x86_indirect_thunk_*, those jmp instruction must be
treated as an indirect jump. Since optprobe prohibits to
optimize probes in the function which uses an indirect jump,
it also needs to find out the function which jump to
__x86_indirect_thunk_* and disable optimization.
Add a check that the jump target address is between the
__indirect_thunk_start/end when optimizing kprobe.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Link: https://lkml.kernel.org/r/151629212062.10241.6991266100233002273.stgit@devbox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark __x86_indirect_thunk_* functions as blacklist for kprobes
because those functions can be called from anywhere in the kernel
including blacklist functions of kprobes.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Link: https://lkml.kernel.org/r/151629209111.10241.5444852823378068683.stgit@devbox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce start/end markers of __x86_indirect_thunk_* functions.
To make it easy, consolidate .text.__x86.indirect_thunk.* sections
to one .text.__x86.indirect_thunk section and put it in the
end of kernel text section and adds __indirect_thunk_start/end
so that other subsystem (e.g. kprobes) can identify it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Link: https://lkml.kernel.org/r/151629206178.10241.6828804696410044771.stgit@devbox Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM doesn't follow the SMCCC when it comes to unimplemented calls,
and inject an UNDEF instead of returning an error. Since firmware
calls are now used for security mitigation, they are becoming more
common, and the undef is counter productive.
Instead, let's follow the SMCCC which states that -1 must be returned
to the caller when getting an unknown function number.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM only supports PMD hugepages at stage 2 but doesn't actually check
that the provided hugepage memory pagesize is PMD_SIZE before populating
stage 2 entries.
In cases where the backing hugepage size is smaller than PMD_SIZE (such
as when using contiguous hugepages), KVM can end up creating stage 2
mappings that extend beyond the supplied memory.
Fix this by checking for the pagesize of userspace vma before creating
PMD hugepage at stage 2.
Fixes: 66b3923a1a0f77a ("arm64: hugetlb: add support for PTE contiguous bit") Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit 68923cdc2eb3 ("MIPS: CM: Add cluster & block args to
mips_cm_lock_other()"), mips_smp_send_ipi_mask() has used
mips_cm_lock_other_cpu() with each CPU number, rather than
mips_cm_lock_other() with the first VPE in each core. Prior to r6,
multicore multithreaded systems such as dual-core dual-thread
interAptivs with CPU Idle enabled (e.g. MIPS Creator Ci40) results in
mips_cm_lock_other() repeatedly hitting WARN_ON(vp != 0).
There doesn't appear to be anything fundamentally wrong about passing a
non-zero VP/VPE number, even if it is a core's region that is locked
into the other region before r6, so remove that particular WARN_ON().
The conversion of the alpha architecture PCI host bridge legacy IRQ
mapping/swizzling to the new PCI host bridge map/swizzle hooks carried
out through:
implies that IRQ for devices are now allocated through pci_assign_irq()
function in pci_device_probe() that is called when a driver matching a
device is found in order to probe the device through the device driver.
Alpha noname platforms required IRQ level programming to be executed
in sio_fixup_irq_levels(), that is called in noname_init_pci(), a
platform hook called within a subsys_initcall.
In noname_init_pci(), present IRQs are detected through
sio_collect_irq_levels() that check the struct pci_dev->irq number
to detect if an IRQ has been allocated for the device.
By the time sio_collect_irq_levels() is called, some devices may still
have not a matching driver loaded to match them (eg loadable module)
therefore their IRQ allocation is still pending - which means that
sio_collect_irq_levels() does not programme the correct IRQ level for
those devices, causing their IRQ handling to be broken when the device
driver is actually loaded and the device is probed.
Fix the issue by adding code in the noname map_irq() function
(noname_map_irq()) that, whilst mapping/swizzling the IRQ line, it also
ensures that the correct IRQ level programming is executed at platform
level, fixing the issue.
Fixes: 0e4c2eeb758a ("alpha/PCI: Replace pci_fixup_irqs() call with
host bridge IRQ mapping hooks") Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Meelis Roos <mroos@linux.ee> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit bacf6b499e11 ("x86/mm: Use a struct to reduce parameters for SME
PGD mapping") moved some parameters into a structure.
The structure was large enough to trigger the stack protection canary in
sme_encrypt_kernel which doesn't work this early, causing reboots.
Mark sme_encrypt_kernel appropriately to not use the canary.
Fixes: bacf6b499e11 ("x86/mm: Use a struct to reduce parameters for SME PGD mapping") Signed-off-by: Laura Abbott <labbott@redhat.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loading key via kernel keyring service erases the internal
key copy immediately after we pass it in crypto layer. This is
wrong because IV is initialized later and we use wrong key
for the initialization (instead of real key there's just zeroed
block).
The bug may cause data corruption if key is loaded via kernel keyring
service first and later same crypt device is reactivated using exactly
same key in hexbyte representation, or vice versa. The bug (and fix)
affects only ciphers using following IVs: essiv, lmk and tcw.
Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service") Signed-off-by: Ondrej Kozina <okozina@redhat.com> Reviewed-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If dm-crypt uses authenticated mode with separate MAC, there are two
concatenated part of the key structure - key(s) for encryption and
authentication key.
Add a missing check for authenticated key length. If this key length is
smaller than actually provided key, dm-crypt now properly fails instead
of crashing.
Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)") Reported-by: Salah Coronya <salahx@yahoo.com> Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some asynchronous cipher implementations may use DMA. The stack may
be mapped in the vmalloc area that doesn't support DMA. Therefore,
the cipher request and initialization vector shouldn't be on the
stack.
Fix this by allocating the request and iv with kmalloc.
For btree removal, there is a corner case that a single thread
could takes 6 locks which is more than THIN_MAX_CONCURRENT_LOCKS(5)
and leads to deadlock.
A btree removal might eventually call
rebalance_children()->rebalance3() to rebalance entries of three
neighbor child nodes when shadow_spine has already acquired two
write locks. In rebalance3(), it tries to shadow and acquire the
write locks of all three child nodes. However, shadowing a child
node requires acquiring a read lock of the original child node and
a write lock of the new block. Although the read lock will be
released after block shadowing, shadowing the third child node
in rebalance3() could still take the sixth lock.
(2 write locks for shadow_spine +
2 write locks for the first two child nodes's shadow +
1 write lock for the last child node's shadow +
1 read lock for the last child node)
Signed-off-by: Dennis Yang <dennisyang@qnap.com> Acked-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When inserting a new key/value pair into a btree we walk down the spine of
btree nodes performing the following 2 operations:
i) space for a new entry
ii) adjusting the first key entry if the new key is lower than any in the node.
If the _root_ node is full, the function btree_split_beneath() allocates 2 new
nodes, and redistibutes the root nodes entries between them. The root node is
left with 2 entries corresponding to the 2 new nodes.
btree_split_beneath() then adjusts the spine to point to one of the two new
children. This means the first key is never adjusted if the new key was lower,
ie. operation (ii) gets missed out. This can result in the new key being
'lost' for a period; until another low valued key is inserted that will uncover
it.
This is a serious bug, and quite hard to make trigger in normal use. A
reproducing test case ("thin create devices-in-reverse-order") is
available as part of the thin-provision-tools project:
https://github.com/jthornber/thin-provisioning-tools/blob/master/functional-tests/device-mapper/dm-tests.scm#L593
Fix the issue by changing btree_split_beneath() so it no longer adjusts
the spine. Instead it unlocks both the new nodes, and lets the main
loop in btree_insert_raw() relock the appropriate one and make any
neccessary adjustments.
Reported-by: Monty Pavel <monty_pavel@sina.com> Signed-off-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It looks like in all cases 'struct vmw_connector_state' is used. But
only in stdu connectors, was atomic_{duplicate,destroy}_state() properly
subclassed. Leading to writes beyond the end of the allocated connector
state block and all sorts of fun memory corruption related crashes.
Fixes: d7721ca71126 "drm/vmwgfx: Connector atomic state" Signed-off-by: Rob Clark <rclark@redhat.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
show_workqueue_state() can print out a lot of messages while being in
atomic context, e.g. sysrq-t -> show_workqueue_state(). If the console
device is slow it may end up triggering NMI hard lockup watchdog.
Handling CD-ROM devices from libsas is decidedly odd, as libata relies
on SCSI EH to be started to figure out that no medium is present. So we
cannot do asynchronous aborts for SATA devices.
Fixes: 909657615d9 ("scsi: libsas: allow async aborts") Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Yves-Alexis Perez <corsac@debian.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
do_task_stat() accesses IP and SP of a task without bumping reference
count of a stack (which became an entity with independent lifetime at
some point).
On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is
greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes
data out of the msgbuf1 array boundary.
It is possible from a user application to run into that issue by
calling the I2C_SMBUS ioctl with data.block[0] greater than
I2C_SMBUS_BLOCK_MAX + 1.
This patch makes the code compliant with
Documentation/i2c/dev-interface by raising an error when the requested
size is larger than 32 bytes.
If an invalid CANFD frame is received, from a driver or from a tun
interface, a Kernel warning is generated.
This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a
kernel, bootet with panic_on_warn, does not panic. A printk seems to be
more appropriate here.
Reported-by: syzbot+e3b775f40babeff6e68b@syzkaller.appspotmail.com Suggested-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an invalid CAN frame is received, from a driver or from a tun
interface, a Kernel warning is generated.
This patch replaces the WARN_ONCE by a simple pr_warn_once, so that a
kernel, bootet with panic_on_warn, does not panic. A printk seems to be
more appropriate here.
Reported-by: syzbot+4386709c0c1284dca827@syzkaller.appspotmail.com Suggested-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In some rare conditions when running one PEAK USB-FD interface over
a non high-speed USB controller, one useless USB fragment might be sent.
This patch fixes the way a USB command is fragmented when its length is
greater than 64 bytes and when the underlying USB controller is not a
high-speed one.
MPP7 is currently muxed as "gpio", but this function doesn't exist for
MPP7, only "gpo" is available. This causes the following error:
kirkwood-pinctrl f1010000.pin-controller: unsupported function gpio on pin mpp7
pinctrl core: failed to register map default (6): invalid type given
kirkwood-pinctrl f1010000.pin-controller: error claiming hogs: -22
kirkwood-pinctrl f1010000.pin-controller: could not claim hogs: -22
kirkwood-pinctrl f1010000.pin-controller: unable to register pinctrl driver
kirkwood-pinctrl: probe of f1010000.pin-controller failed with error -22
So the pinctrl driver is not probed, all device drivers (including the
UART driver) do a -EPROBE_DEFER, and therefore the system doesn't
really boot (well, it boots, but with no UART, and no devices that
require pin-muxing).
Back when the Device Tree file for this board was introduced, the
definition was already wrong. The pinctrl driver also always described
as "gpo" this function for MPP7. However, between Linux 4.10 and 4.11,
a hog pin failing to be muxed was turned from a simple warning to a
hard error that caused the entire pinctrl driver probe to bail
out. This is probably the result of commit 6118714275f0a ("pinctrl:
core: Fix pinctrl_register_and_init() with pinctrl_enable()").
This commit fixes the Device Tree to use the proper "gpo" function for
MPP7, which fixes the boot of OpenBlocks A7, which was broken since
Linux 4.11.
Fixes: f24b56cbcd9d ("ARM: kirkwood: add support for OpenBlocks A7 platform") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DRM driver most notably, but also out of tree drivers (for now) like
the VPU or GPU drivers, are quite big consumers of large, contiguous memory
buffers. However, the sunxi_defconfig doesn't enable CMA in order to
mitigate that, which makes them almost unusable.
On the CP modules we found on Armada 7K/8K, many IP block actually also
need a "functional" clock (from the bus). This patch add them which allows
to fix some issues hanging the kernel:
If Ethernet and sdhci driver are built as modules and sdhci was loaded
first then the kernel hang.
Fixes: bb16ea1742c8 ("mmc: sdhci-xenon: Fix clock resource by adding an optional bus clock") Reported-by: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Wahren reports a problem with a warning fix that was merged
for v4.15: we had lots of device nodes with a 'phys' property pointing
to a device node that is not compliant with the binding documented in
Documentation/devicetree/bindings/phy/phy-bindings.txt
This generally works because USB HCD drivers that support both the generic
phy subsystem and the older usb-phy subsystem ignore most errors from
phy_get() and related calls and then use the usb-phy driver instead.
However, it turns out that making the usb-nop-xceiv device compatible with
the generic-phy binding changes the phy_get() return code from -EINVAL to
-EPROBE_DEFER, and the dwc2 usb controller driver for bcm2835 now returns
-EPROBE_DEFER from its probe function rather than ignoring the failure,
breaking all USB support on raspberry-pi when CONFIG_GENERIC_PHY is
enabled. The same code is used in the dwc3 driver and the usb_add_hcd()
function, so a reasonable assumption would be that many other platforms
are affected as well.
I have reviewed all the related patches and concluded that "usb-nop-xceiv"
is the only USB phy that is affected by the change, and since it is by far
the most commonly referenced phy, all the other USB phy drivers appear
to be used in ways that are are either safe in DT (they don't use the
'phys' property), or in the driver (they already ignore -EPROBE_DEFER
from generic-phy when usb-phy is available).
To work around the problem, this adds a special case to _of_phy_get()
so we ignore any PHY node that is compatible with "usb-nop-xceiv",
as we know that this can never load no matter how much we defer. In the
future, we might implement a generic-phy driver for "usb-nop-xceiv"
and then remove this workaround.
Since we generally want older kernels to also want to work with the
fixed devicetree files, it would be good to backport the patch into
stable kernels as well (3.13+ are possibly affected), even though they
don't contain any of the patches that may have caused regressions.
Fixes: 014d6da6cb25 ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells Fixes: c5bbf358b790 arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv Fixes: 44e5dced2ef6 arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv Fixes: f568f6f554b8 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv Fixes: d745d5f277bf ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv Fixes: 915fbe59cbf2 ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2 Link: https://patchwork.kernel.org/patch/10158145/ Cc: Felipe Balbi <balbi@kernel.org> Cc: Eric Anholt <eric@anholt.net> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since enums do not get converted by the TRACE_EVENT macro into their values,
the event format displaces the enum name and not the value. This breaks
tools like perf and trace-cmd that need to interpret the raw binary data. To
solve this, an enum map was created to convert these enums into their actual
numbers on boot up. This is done by TRACE_EVENTS() adding a
TRACE_DEFINE_ENUM() macro.
Some enums were not being converted. This was caused by an optization that
had a bug in it.
All calls get checked against this enum map to see if it should be converted
or not, and it compares the call's system to the system that the enum map
was created under. If they match, then they call is processed.
To cut down on the number of iterations needed to find the maps with a
matching system, since calls and maps are grouped by system, when a match is
made, the index into the map array is saved, so that the next call, if it
belongs to the same system as the previous call, could start right at that
array index and not have to scan all the previous arrays.
The problem was, the saved index was used as the variable to know if this is
a call in a new system or not. If the index was zero, it was assumed that
the call is in a new system and would keep incrementing the saved index
until it found a matching system. The issue arises when the first matching
system was at index zero. The next map, if it belonged to the same system,
would then think it was the first match and increment the index to one. If
the next call belong to the same system, it would begin its search of the
maps off by one, and miss the first enum that should be converted. This left
a single enum not converted properly.
Also add a comment to describe exactly what that index was for. It took me a
bit too long to figure out what I was thinking when debugging this issue.
Link: http://lkml.kernel.org/r/717BE572-2070-4C1E-9902-9F2E0FEDA4F8@oracle.com Fixes: 0c564a538aa93 ("tracing: Add TRACE_DEFINE_ENUM() macro to map enums to their values") Reported-by: Chuck Lever <chuck.lever@oracle.com> Teste-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / arm / linux.git / log