Michal Privoznik [Mon, 23 Feb 2015 16:21:46 +0000 (17:21 +0100)]
network_conf: Introduce virNetworkObjListForEach
This API will be used in the future to call passed callback over
each network object in the list. It's slightly different to its
virDomainObjListForEach counterpart, because virDomainObjList
uses a hash table to store domain object, while virNetworkObjList
uses an array.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Jiri Denemark [Fri, 6 Mar 2015 14:58:55 +0000 (15:58 +0100)]
sanlock: Don't spam logs with "target pid not found"
Commit v1.2.4-52-gda879e5 fixed issues with domains started before
sanlock driver was enabled by checking whether a running domain is
registered with sanlock and if it's not, sanlock driver is basically
ignored for the domain.
However, it was checking this even for domain which has just been
started and no sanlock_* API was called for them yet. This results in
Jiri Denemark [Mon, 9 Mar 2015 12:12:36 +0000 (13:12 +0100)]
locking: Fix flags in virLockManagerLockDaemonNew
virLockManager*New APIs are never called with
VIR_LOCK_MANAGER_USES_STATE. Moreover, lockd driver does not maintain
any state that would need to be transferred during migration and thus it
should not mention VIR_LOCK_MANAGER_USES_STATE at all.
Pavel Hrdina [Sat, 7 Mar 2015 10:24:48 +0000 (11:24 +0100)]
tests: fix qemuxml2argvtest to be arch independent
Commit 5aee81a0 introduced a new test for disk-serial. The test fails
on i686 arch because there is no need to add "-cpu qemu32" to command
line. To fix the test update emulator in XML to "/usr/bin/qemu" so we
don't add the "-cpu qemu32" to command while running the test on i686 or
x86_64 host.
John Ferlan [Fri, 6 Mar 2015 17:27:37 +0000 (12:27 -0500)]
qemu: Resolve Coverity CHECKED_RETURN issue
By adding a call and check of return of virBitmapToData to the
IOThreads code, my Coverity checker lets me know qemuDomainHelperGetVcpus
also needs to check the status...
We don't usually do tests purely for one change, but one change was
special because when users will migrate to OVMF/AAVMF, commit 18f9f69b
makes their lives easier by allowing them to interleave <type/> inside
<os/>. It would be nice of us to keep the possibility of them pasting
the loader and nvram elements wherever it is valid, hence this test.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Michal Privoznik [Thu, 26 Feb 2015 14:28:07 +0000 (15:28 +0100)]
domain_conf: Format <pvpanic/> without address correctly
We have something like pvpanic device. However, in some cases it does
not have any address assigned, in which case we produce this ugly XML
(still valid though):
Delete .po files which contain zero translated strings. Refresh
the .pot file and pull down latest translations from Zanata.
When refreshing the libvirt.pot, it can be pushed to zanata
and .po files resynchonized using
# cd po
# rm libvirt.pot
# make libvirt.pot
# zanata-cli push
# zanata-cli pull
Note there is no need for 'make update-po', as long as you do
a zanata push, immediately followed by zanata pull, as the
Zanata server will ensure the .po files downloaded match the
just pushed .pot file.
Note at time of writing, it is strongly recommended to only
use the zanata Java client binary (zanata-cli), and not the
python client binary (zanata). This is because the moderately
large size of the libvirt pot file is causing errors when the
python client tries to push, which have been known to result
in the loss of all translations on the server, as well as also
preventing uploading of .po files themselves :-(
John Ferlan [Wed, 11 Feb 2015 20:29:22 +0000 (15:29 -0500)]
virsh: Add 'iothreadsinfo' command
Add the 'iothreadsinfo' command to display IOThread Info data. Allow for
[--live] or [--config] options in order to display live or config data
for an active domain.
$ virsh iothreadsinfo --help
NAME
iothreadsinfo - view domain IOThreads
DESCRIPTION
Returns basic information about the domain IOThreads.
OPTIONS
[--domain] <string> domain name, id or uuid
--config affect next boot
--live affect running domain
--current affect current domain
An active domain may return:
$ virsh iothreads $dom
IOThread ID CPU Affinity
---------------------------------------------------
1 2
2 3
3 0
$ echo $?
0
For domains which don't have IOThreads the following is returned:
$ virsh iothreads $dom
No IOThreads found for the domain
$ echo $?
0
For domains which are not running the following is returned:
$ virsh iothreads $dom --live
error: Unable to get domain IOThreads information
error: Requested operation is not valid: domain is not running
$ echo $?
1
Editing a domains configuration and modifying the iothreadpin data for
thread 3 from nothing provided to setting a cpuset of '0-1' and then
displaying using --config would display:
$ virsh iothreads f18iothr --config
IOThread ID CPU Affinity
----------------------------
1 2
2 3
3 0-1
John Ferlan [Wed, 11 Feb 2015 17:45:58 +0000 (12:45 -0500)]
qemu: Implement the qemu driver fetch for IOThreads
Depending on the flags passed, either attempt to return the active/live
IOThread data for the domain or the config data.
The active/live path will call into the Monitor in order to get the
IOThread data and then correlate the thread_id's returned from the
monitor to the currently running system/threads in order to ascertain
the affinity for each iothread_id.
The config path will map each of the configured IOThreads and return
any configured iothreadspin data
John Ferlan [Mon, 9 Feb 2015 21:16:55 +0000 (16:16 -0500)]
Implement public API for virDomainGetIOThreadsInfo
Add virDomainGetIOThreadInfo in order to return a list of
virDomainIOThreadInfoPtr structures which list the IOThread ID
and the CPU Affinity map for each IOThread for the domain.
For an active domain, the live data will be returned, while for
an inactive domain, the config data will be returned.
The API supports either the --live or --config flag, but not both.
Also added virDomainIOThreadsInfoFree in order to free the cpumap
and the IOThreadInfo structure.
Pavel Hrdina [Mon, 2 Mar 2015 19:04:12 +0000 (20:04 +0100)]
memtune: change the way how we store unlimited value
There was a mess in the way how we store unlimited value for memory
limits and how we handled values provided by user. Internally there
were two possible ways how to store unlimited value: as 0 value or as
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED. Because we chose to store memory
limits as unsigned long long, we cannot use -1 to represent unlimited.
It's much easier for us to say that everything greater than
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED means unlimited and leave 0 as valid
value despite that it makes no sense to set limit to 0.
Remove unnecessary function virCompareLimitUlong. The update of test
is to prevent the 0 to be miss-used as unlimited in future.
Pavel Hrdina [Wed, 4 Mar 2015 14:08:09 +0000 (15:08 +0100)]
virutil: introduce helper functions for memory limits
The first one is to truncate the memory limit to
VIR_DOMAIN_MEMORY_PARAM_UNLIMITED if the value is greater and the second
one is to decide whether the memory limit is set or not, unlimited means
that it's not set.
Pavel Hrdina [Mon, 2 Mar 2015 15:26:52 +0000 (16:26 +0100)]
virsh: fix memtune to also accept 0 as valid value
Fix vshMemtuneGetSize to return correct value. We can then decide
according that return code whether a parameter is present and valid or
not. This will allow as to accept 0 as a valid value.
Stefan Berger [Thu, 5 Mar 2015 23:57:06 +0000 (18:57 -0500)]
qemu: Pass file descriptor when using TPM passthrough
Pass the TPM file descriptor to QEMU via command line.
Instead of passing /dev/tpm0 we now pass /dev/fdset/10 and the additional
parameters -add-fd set=10,fd=20.
This addresses the use case when QEMU is started with non-root privileges
and QEMU cannot open /dev/tpm0 for example.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Jim Fehlig [Mon, 2 Mar 2015 01:33:48 +0000 (18:33 -0700)]
libxl: remove unneeded cleanup_unlock label
In the old days of a global driver lock, it was necessary to unlock
the driver after a domain restore operation. When the global lock
was removed from the driver, some remnants were left behind in
libxlDomainRestoreFlags. Remove this unneeded (and incorrect) code.
Peter Krempa [Tue, 3 Mar 2015 16:50:59 +0000 (17:50 +0100)]
conf: Remove duplicate entries in <metadata> by namespace
Since the APIs support just one element per namespace and while
modifying an element all duplicates would be removed, let's do this
right away in the post parse callback.
There's been a bug report appearing on the qemu-devel list, that
libvirt is unable to pass spaces in disk serial number [1]. Not only
our RNG schema forbids that, the code is not prepared either. However,
with a bit of escaping (if needed) we can allow spaces there.
Michal Privoznik [Thu, 26 Feb 2015 16:13:53 +0000 (17:13 +0100)]
parallels: Cleanup partly opened drivers on connect open failure
Well, the parallelsConnectOpen() joins several sub-driver openings
into one big if condition. If any of sub-driver fails to open, the
whole API finishes immediately. The problem is, sub-drivers may have
left some memory allocated. Fortunately, we have a free function for
that: parallelsConnectClose(). This is, however, not prepared for
partially allocated driver structure. So, prepare the free function
for it and call it at the right place, in the if body.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Erik Skultety [Tue, 3 Mar 2015 15:57:38 +0000 (16:57 +0100)]
storage: tweak condition to properly test lseek
According to the POSIX standard, off_t (returned by lseek) is defined as
signed integral type no shorter than int. Because our offset variable is defined
as unsigned long long, the original check was passed successfully if UINT64_MAX had
been used as offset value, due to implicit conversion.
Erik Skultety [Tue, 24 Feb 2015 16:25:55 +0000 (17:25 +0100)]
virsh: tweak domif-getlink link state reporting message
According to docs, we only support 2 link states for an interface
up/down, 'up' being the default state if link state is unspecified in
domain's XML, so the message when no link state is provided should be
changed a little.
Shanzhi Yu [Sat, 28 Feb 2015 09:51:36 +0000 (17:51 +0800)]
qemu: snapshot: Don't skip check for qcow2 format with network disks
When the domain's source disk type is network, if source protocol is rbd
or sheepdog, the 'if().. break' will end the current case, which lead to
miss check the driver type is raw or qcow2. Libvirt will allow to create
internal snapshot for a running domain with raw format disk which based
on rbd storage.
While both protocols support internal snapshots of the disk qemu is not
able to use it as it requires some place to store the memory image. The
check if the disk is backed by a qcow2 image needs to be executed
always.
The timestamp is invalid as the monitor was not entered for that domain.
We can use that to detect that the domain has an active job and report a
better error instead:
Instead of copying the whole object onto stack when calling the
function, just pass the pointer to the object and save up some
space on the stack. Moreover, this prepares the code to hide the
virNetworkObjList structure into network_conf.c and use accessors
only.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 25 Feb 2015 14:10:53 +0000 (15:10 +0100)]
virNetworkObjIsDuplicate: s/@doms/@nets/
This is probably a copy-paste error from virDomainObj*
counterpart. But when speaking of virNetworkObj we should use
variable @nets for an array of networks, rather than @doms. It's
just confusing.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 25 Feb 2015 16:46:45 +0000 (17:46 +0100)]
testNetworkUpdate: Unlock network at the end
Silly this bug went unnoticed so long. At the beginning we try to
find the passed network in the list of network objects. If found,
it's locked and real work takes place. Then, in the end, the
network object is never unlocked.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Mon, 23 Feb 2015 18:00:57 +0000 (19:00 +0100)]
bridge_driver: Don't check network active unlocked
Okay, this is mainly for educational purposes since is called
from single point only with all the possible locks held. So
there's no way for other thread to hop in and do something wrong.
Nevertheless, we should not give bad example.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Mon, 23 Feb 2015 14:05:44 +0000 (15:05 +0100)]
networkLookupByUUID: Improve error message
We have this function networkObjFromNetwork() which for given
virNetworkPtr tries to find corresponding virNetworkObjPtr. If no
object is found, a nice error message is printed out:
no network with matching uuid '$uuid' ($name)
Let's improve the error message produced by networkLookupByUUID to
follow that logic.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
So, libvirt uses pid file to track pid of started qemus. Whenever
a domain is started, its pid is put into corresponding pid file.
The pid file path is generated based on domain name and stored
into domain object internals. However, it's not stored in the
status XML and therefore lost on daemon restarts. Hence, later,
when domain is being shut down, the daemon does not know which
pid file to unlink, and the correct pid file is left behind. To
avoid this, lets generate the pid file path again in
qemuProcessReconnect().
Reported-by: Luyao Huang <lhuang@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Pavel Hrdina [Fri, 27 Feb 2015 14:07:03 +0000 (15:07 +0100)]
qemu: check defaultMode for spice graphics independently
Instead of checking defaultMode for every channel that has no mode
configured, test it only once outside of channel loop. This fixes a bug
that in case all possible channels are fore example set to insecure, but
defaultMode is set to secure, we wouldn't auto-generate TLS port. This
results in failure while starting a guest.
Pavel Hrdina [Fri, 27 Feb 2015 13:28:53 +0000 (14:28 +0100)]
qemu: remove duplicated code for allocating spice ports
We have two different places that needs to be updated while touching
code for allocation spice ports. Add a bool option to
'qemuProcessSPICEAllocatePorts' function to switch between true and fake
allocation so we can use this function also in qemu_driver to generate
native domain definition.
Peter Krempa [Mon, 2 Mar 2015 16:21:23 +0000 (17:21 +0100)]
schema: Fix interface link state schema
In commit edd1295e1da6bfe8e4e257e5fbfad71ac0bf7c87 I've introduced an
XML element that allows to configure state of the network interface
link. Somehow the RNG schema hunk ended up in a weird place in the
network schema definition. Move it to the right place and add a test
case.
Note that the link state is set up via the monitor at VM startup so I
originally didn't think of adding a test case.
Since adding the support for scheduler policy settings in commit 8680ea97, there are two enums with the same information. That was
caused by rewriting the patch since first draft.
Find out thanks to clang, but there was no impact whatsoever.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
The problem here was that when opening a channel, we were checking
whether the channel given is alias (can't be NULL for running domain) or
it's name, which can be NULL (for example with spicevmc). In case of
such domain qemuDomainOpenChannel() made the daemon crash.
STREQ_NULLABLE() is safe to use since the code in question is wrapped in
"if (name)" and is more readable, so use that instead of checking for
non-NULL "vm->def->channels[i]->target.name".
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Add to the man page a more complete description of what exactly the
command expects on input and will return on output based on what is
currently supported.
Perhaps missing findPoolSources implementations are backends for
sheepdog and rbd. Also missing any backend is zfs.
John Ferlan [Wed, 25 Feb 2015 22:31:55 +0000 (17:31 -0500)]
iscsi: Adjust error message for findStorageSources backend
The virStorageBackendISCSIFindPoolSources API only needs the 'host' name
in order to discover iSCSI pools, it returns the various device paths.
On input, it's also possible to further restrict a search by providing the
port attribute for the host element and the (undocumented) initiator element.
For example:
$ virsh find-storage-pool-sources-as iscsi
error: Failed to find any iscsi pool sources
error: invalid argument: hostname and device path must be specified for iscsi sources
Modify the virsh man page to more accurately describe which values are
set by the virsh setmem and displayed by the virsh memtune or dominfo
based on the setmem command results.
According to the formatstorage.html description for <source> element
and "format" attribute: "All drivers are required to have a default
value for this, so it is optional."
As it turns out the disk backend did not choose a default value, so I
added a default of "msdos" if the source type is "unknown" as well as
updating the storage.html backend disk volume driver documentation to
indicate the default format is dos.
This patch resolves a situation where the same "<target dev='$name'...>"
can be used for multiple disks in the domain.
While the $name is "mostly" advisory regarding the expected order that
the disk is added to the domain and not guaranteed to map to the device
name in the guest OS, it still should be unique enough such that other
domblk* type operations can be performed.
Without the patch, the domblklist will list the same Target twice:
Additionally, getting domblkstat, domblkerror, domblkinfo, and other block*
type calls will not be able to reference the second target.
Fortunately, hotplug disallows adding a "third" sda value:
$ qemu-img create -f raw /var/lib/libvirt/images/file2.img 10M
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sda
error: Failed to attach disk
error: operation failed: target sda already exists
$
BUT, it since 'sdb' doesn't exist one would get the following on the same
hotplug attempt, but changing to use 'sdb' instead of 'sda'
$ virsh attach-disk $dom /var/lib/libvirt/images/file2.img sdb
error: Failed to attach disk
error: internal error: unable to execute QEMU command 'device_add': Duplicate ID 'scsi0-0-1' for device
$
Since we cannot fix this issue at parsing time, the best that can be done so
as to not "lose" a domain is to make the check prior to starting the guest
with the results as follows:
$ virsh start $dom
error: Failed to start domain $dom
error: XML error: target 'sda' duplicated for disk sources '/var/lib/libvirt/images/file.qcow2' and '/var/lib/libvirt/images/file.img'
$
Running 'make check' found a few more instances in the tests where this
duplicated target dev value was being used. These also exhibited some
duplicated 'id=' values (negating the uniqueness argument of aliases) in
the corresponding .args file and of course the *xmlout version of a few
input XML files.
Peter Krempa [Tue, 17 Feb 2015 15:53:25 +0000 (16:53 +0100)]
qemu: Forbid setting maximum memory size with the API with NUMA enabled
NUMA enabled guest configuration explicitly specifies memory sizes for
individual nodes. Allowing the virDomainSetMemoryFlags API (and friends)
to change the total doesn't make sense as the individual node configs
are not updated in that case.
Erik Skultety [Fri, 27 Feb 2015 11:45:57 +0000 (12:45 +0100)]
docs: add a note that attr 'managed' is only used by PCI devices
Our documentation isn't 100% clear about hostdev 'managed' attribute usage,
because it only makes sense to use it with PCI devices, yet we format
this attribute to all hostdev devices. By adding a note into the docs,
we can possibly avoid confusion from customer's side and also avoid a solution
using ternary logic.
Ján Tomko [Tue, 17 Feb 2015 15:55:59 +0000 (16:55 +0100)]
Allow omitting volume capacity when backing store is specified
Add VIR_VOL_XML_PARSE_OPT_CAPACITY flag to virStorageVolDefParseXML.
With this flag, no error is reported when the capacity is missing
if there is a backing store.
Ján Tomko [Wed, 18 Feb 2015 16:25:10 +0000 (17:25 +0100)]
Make -boot arg generation more readable
If we combine the boot order on the command line with other
boot options, we prepend order= in front of it.
Instead of checking if the number of added arguments is between
0 and 2, separate the strings for boot order and options
and prepend boot order only if both strings are not empty.
Michal Privoznik [Fri, 27 Feb 2015 15:11:25 +0000 (16:11 +0100)]
docs: Add mist.io as libvirt-based application
As reported on the libvirt-users list [1], there's new web
application called mist.io which uses libvirt as one of its
backends. Lets add it into our list of libivrt based
applications.
Ján Tomko [Thu, 26 Feb 2015 13:33:26 +0000 (14:33 +0100)]
Ignore listen attribute of <graphics> for type network listens
Commit 6992994 started filling the listen attribute
of the parent <graphics> elements from type='network' listens.
When this XML is passed to UpdateDevice, parsing fails:
XML error: graphics listen attribute 10.20.30.40 must match
address attribute of first listen element (found none)
Ignore the address in the parent <graphics> attribute
when no type='address' listens are found,
the same we ignore the address for the <listen> subelements
when parsing inactive XML.
Peter Krempa [Thu, 26 Feb 2015 09:35:47 +0000 (10:35 +0100)]
util: storage: Fix error type in virStorageSourceParseBackingURI
The gluster volume name extraction code was copied from the XML parser
without changing the VIR_ERR_XML_ERROR error code. Use
VIR_ERR_CONFIG_UNSUPPORTED instead.
Peter Krempa [Thu, 26 Feb 2015 09:28:21 +0000 (10:28 +0100)]
util: storagefile: Don't crash on gluster URIs without path
Similar to commit fdb80ed4f6563928b9942a0d1450e0c725aa6c06 libvirtd
would crash if a gluster URI without path would be used in the backing
chain of a volume. The crash happens in the gluster specific part of the
parser that extracts the gluster volume name from the path.
Fix the crash by checking that the PATH is NULL.
This patch does not contain a test case as it's not possible to test it
with the current infrastructure as the test suite would attempt to
contact the gluster server in the URI. I'm working on the test suite
addition but that will be post-release material.
projects / libvirt.git / log