Stefan Hajnoczi [Fri, 12 May 2017 13:29:49 +0000 (09:29 -0400)]
Merge remote-tracking branch 'kwolf/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Thu 11 May 2017 10:31:37 AM EDT
# gpg: using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* kwolf/tags/for-upstream: (58 commits)
MAINTAINERS: Add qemu-progress to the block layer
qcow2: Discard/zero clusters by byte count
qcow2: Assert that cluster operations are aligned
qcow2: Optimize write zero of unaligned tail cluster
iotests: Add test 179 to cover write zeroes with unmap
iotests: Improve _filter_qemu_img_map
qcow2: Optimize zero_single_l2() to minimize L2 churn
qcow2: Make distinction between zero cluster types obvious
qcow2: Name typedef for cluster type
qcow2: Correctly report status of preallocated zero clusters
block: Update comments on BDRV_BLOCK_* meanings
qcow2: Use consistent switch indentation
qcow2: Nicer variable names in qcow2_update_snapshot_refcount()
tests: Add coverage for recent block geometry fixes
blkdebug: Add ability to override unmap geometries
blkdebug: Simplify override logic
blkdebug: Add pass-through write_zero and discard support
blkdebug: Refactor error injection
blkdebug: Sanity check block layer guarantees
qemu-io: Switch 'map' output to byte-based reporting
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Mon, 8 May 2017 18:07:05 +0000 (14:07 -0400)]
aio: add missing aio_notify() to aio_enable_external()
The main loop uses aio_disable_external()/aio_enable_external() to
temporarily disable processing of external AioContext clients like
device emulation.
This allows monitor commands to quiesce I/O and prevent the guest from
submitting new requests while a monitor command is in progress.
The aio_enable_external() API is currently broken when an IOThread is in
aio_poll() waiting for fd activity when the main loop re-enables
external clients. Incrementing ctx->external_disable_cnt does not wake
the IOThread from ppoll(2) so fd processing remains suspended and leads
to unresponsive emulated devices.
This patch adds an aio_notify() call to aio_enable_external() so the
IOThread is kicked out of ppoll(2) and will re-arm the file descriptors.
Eric Blake [Thu, 4 May 2017 17:37:45 +0000 (12:37 -0500)]
block: Simplify BDRV_BLOCK_RAW recursion
Since we are already in coroutine context during the body of
bdrv_co_get_block_status(), we can shave off a few layers of
wrappers when recursing to query the protocol when a format driver
returned BDRV_BLOCK_RAW.
Note that we are already using the correct recursion later on in
the same function, when probing whether the protocol layer is sparse
in order to find out if we can add BDRV_BLOCK_ZERO to an existing
BDRV_BLOCK_DATA|BDRV_BLOCK_OFFSET_VALID.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
Message-id: 20170504173745.27414-1-eblake@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The GThread implementation is not functional enough to actually
run QEMU reliably. While it was potentially useful for debugging,
we have a scripts/qemugdb/coroutine.py to enable tracing of
ucontext coroutines in GDB, so that removes the only reason for
GThread to exist.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Acked-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Thu, 11 May 2017 12:34:56 +0000 (14:34 +0200)]
Merge remote-tracking branch 'mreitz/tags/pull-block-2017-05-11' into queue-block
Block patches for the block queue.
# gpg: Signature made Thu May 11 14:28:41 2017 CEST
# gpg: using RSA key 0xF407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* mreitz/tags/pull-block-2017-05-11: (22 commits)
MAINTAINERS: Add qemu-progress to the block layer
qcow2: Discard/zero clusters by byte count
qcow2: Assert that cluster operations are aligned
qcow2: Optimize write zero of unaligned tail cluster
iotests: Add test 179 to cover write zeroes with unmap
iotests: Improve _filter_qemu_img_map
qcow2: Optimize zero_single_l2() to minimize L2 churn
qcow2: Make distinction between zero cluster types obvious
qcow2: Name typedef for cluster type
qcow2: Correctly report status of preallocated zero clusters
block: Update comments on BDRV_BLOCK_* meanings
qcow2: Use consistent switch indentation
qcow2: Nicer variable names in qcow2_update_snapshot_refcount()
tests: Add coverage for recent block geometry fixes
blkdebug: Add ability to override unmap geometries
blkdebug: Simplify override logic
blkdebug: Add pass-through write_zero and discard support
blkdebug: Refactor error injection
blkdebug: Sanity check block layer guarantees
qemu-io: Switch 'map' output to byte-based reporting
...
Eric Blake [Sun, 7 May 2017 00:05:52 +0000 (19:05 -0500)]
qcow2: Discard/zero clusters by byte count
Passing a byte offset, but sector count, when we ultimately
want to operate on cluster granularity, is madness. Clean up
the external interfaces to take both offset and count as bytes,
while still keeping the assertion added previously that the
caller must align the values to a cluster. Then rename things
to make sure backports don't get confused by changed units:
instead of qcow2_discard_clusters() and qcow2_zero_clusters(),
we now have qcow2_cluster_discard() and qcow2_cluster_zeroize().
The internal functions still operate on clusters at a time, and
return an int for number of cleared clusters; but on an image
with 2M clusters, a single L2 table holds 256k entries that each
represent a 2M cluster, totalling well over INT_MAX bytes if we
ever had a request for that many bytes at once. All our callers
currently limit themselves to 32-bit bytes (and therefore fewer
clusters), but by making this function 64-bit clean, we have one
less place to clean up if we later improve the block layer to
support 64-bit bytes through all operations (with the block layer
auto-fragmenting on behalf of more-limited drivers), rather than
the current state where some interfaces are artificially limited
to INT_MAX at a time.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-13-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:51 +0000 (19:05 -0500)]
qcow2: Assert that cluster operations are aligned
We already audited (in commit 0c1bd469) that qcow2_discard_clusters()
is only passed cluster-aligned start values; but we can further
tighten the assertion that the only unaligned end value is at EOF.
Recent commits have taken advantage of an unaligned tail cluster,
for both discard and write zeroes.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-12-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:50 +0000 (19:05 -0500)]
qcow2: Optimize write zero of unaligned tail cluster
We've already improved discards to operate efficiently on the tail
of an unaligned qcow2 image; it's time to make a similar improvement
to write zeroes. The special case is only valid at the tail
cluster of a file, where we must recognize that any sectors beyond
the image end would implicitly read as zero, and therefore should
not penalize our logic for widening a partial cluster into writing
the whole cluster as zero.
However, note that for now, the special case of end-of-file is only
recognized if there is no backing file, or if the backing file has
the same length; that's because when the backing file is shorter
than the active layer, we don't have code in place to recognize
that reads of a sector unallocated at the top and beyond the backing
end-of-file are implicitly zero. It's not much of a real loss,
because most people don't use images that aren't cluster-aligned,
or where the active layer is a different size than the backing
layer (especially where the difference falls within a single cluster).
Update test 154 to cover the new scenarios, using two images of
intentionally differing length.
While at it, fix the test to gracefully skip when run as
./check -qcow2 -o compat=0.10 154
since the older format lacks zero clusters already required earlier
in the test.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-11-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:49 +0000 (19:05 -0500)]
iotests: Add test 179 to cover write zeroes with unmap
No tests were covering write zeroes with unmap. Additionally,
I needed to prove that my previous patches for correct status
reporting and write zeroes optimizations actually had an impact.
The test works for cluster_size between 8k and 2M (for smaller
sizes, it fails because our allocation patterns are not contiguous
with small clusters - in part, the largest consecutive allocation
we tend to get is often bounded by the size covered by one L2
table).
Note that testing for zero clusters is tricky: 'qemu-io map'
reports whether data comes from the current layer of the image
(useful for sniffing out which regions of the file have
QCOW_OFLAG_ZERO) - but doesn't show which clusters have mappings;
while 'qemu-img map' sees "zero":true for both unallocated and
zero clusters for any qcow2 with no backing layer (so less useful
at detecting true zero clusters), but reliably shows mappings.
So we have to rely on both queries side-by-side at each point of
the test.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-10-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:48 +0000 (19:05 -0500)]
iotests: Improve _filter_qemu_img_map
Although _filter_qemu_img_map documents that it scrubs offsets, it
was only doing so for human mode. Of the existing tests using the
filter (97, 122, 150, 154, 176), two of them are affected, but it
does not hurt the validity of the tests to not require particular
mappings (another test, 66, uses offsets but intentionally does not
pass through _filter_qemu_img_map, because it checks that offsets
are unchanged before and after an operation).
Another justification for this patch is that it will allow a future
patch to utilize 'qemu-img map --output=json' to check the status of
preallocated zero clusters without regards to the mapping (since
the qcow2 mapping can be very sensitive to the chosen cluster size,
when preallocation is not in use).
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-9-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:47 +0000 (19:05 -0500)]
qcow2: Optimize zero_single_l2() to minimize L2 churn
Similar to discard_single_l2(), we should try to avoid dirtying
the L2 cache when the cluster we are changing already has the
right characteristics.
Note that by the time we get to zero_single_l2(), BDRV_REQ_MAY_UNMAP
is a requirement to unallocate a cluster (this is because the block
layer clears that flag if discard.* flags during open requested that
we never punch holes - see the conversation around commit 170f4b2e,
https://lists.gnu.org/archive/html/qemu-devel/2016-09/msg07306.html).
Therefore, this patch can only reuse a zero cluster as-is if either
unmapping is not requested, or if the zero cluster was not associated
with an allocation.
Technically, there are some cases where an unallocated cluster
already reads as all zeroes (namely, when there is no backing file
[easy: check bs->backing], or when the backing file also reads as
zeroes [harder: we can't check bdrv_get_block_status since we are
already holding the lock]), where the guest would not immediately see
a difference if we left that cluster unallocated. But if the user
did not request unmapping, leaving an unallocated cluster is wrong;
and even if the user DID request unmapping, keeping a cluster
unallocated risks a subtle semantic change of guest-visible contents
if a backing file is later added, and it is not worth auditing
whether all internal uses such as mirror properly avoid an unmap
request. Thus, this patch is intentionally limited to just clusters
that are already marked as zero.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-8-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:46 +0000 (19:05 -0500)]
qcow2: Make distinction between zero cluster types obvious
Treat plain zero clusters differently from allocated ones, so that
we can simplify the logic of checking whether an offset is present.
Do this by splitting QCOW2_CLUSTER_ZERO into two new enums,
QCOW2_CLUSTER_ZERO_PLAIN and QCOW2_CLUSTER_ZERO_ALLOC.
I tried to arrange the enum so that we could use
'ret <= QCOW2_CLUSTER_ZERO_PLAIN' for all unallocated types, and
'ret >= QCOW2_CLUSTER_ZERO_ALLOC' for allocated types, although
I didn't actually end up taking advantage of the layout.
In many cases, this leads to simpler code, by properly combining
cases (sometimes, both zero types pair together, other times,
plain zero is more like unallocated while allocated zero is more
like normal).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170507000552.20847-7-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:45 +0000 (19:05 -0500)]
qcow2: Name typedef for cluster type
Although it doesn't add all that much type safety (this is C, after
all), it does add a bit of legibility to use the name QCow2ClusterType
instead of a plain int.
In particular, qcow2_get_cluster_offset() has an overloaded return
type; a QCow2ClusterType on success, and -errno on failure; keeping
the cluster type in a separate variable makes it slightly easier for
the next patch to make further computations based on the type.
Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170507000552.20847-6-eblake@redhat.com
[mreitz: Use the new type in two more places (one of them pulled from
the next patch)] Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:44 +0000 (19:05 -0500)]
qcow2: Correctly report status of preallocated zero clusters
We were throwing away the preallocation information associated with
zero clusters. But we should be matching the well-defined semantics
in bdrv_get_block_status(), where (BDRV_BLOCK_ZERO |
BDRV_BLOCK_OFFSET_VALID) informs the user which offset is reserved,
while still reminding the user that reading from that offset is
likely to read garbage.
count_contiguous_clusters_by_type() is now used only for unallocated
cluster runs, hence it gets renamed and tightened.
Making this change lets us see which portions of an image are zero
but preallocated, when using qemu-img map --output=json. The
--output=human side intentionally ignores all zero clusters, whether
or not they are preallocated.
The fact that there is no change to qemu-iotests './check -qcow2'
merely means that we aren't yet testing this aspect of qemu-img;
a later patch will add a test.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-5-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:43 +0000 (19:05 -0500)]
block: Update comments on BDRV_BLOCK_* meanings
We had some conflicting documentation: a nice 8-way table that
described all possible combinations of DATA, ZERO, and
OFFSET_VALID, contrasted with text that implied that OFFSET_VALID
always meant raw data could be read directly. Furthermore, the
text refers a lot to bs->file, even though the interface was
updated back in 67a0fd2a to let the driver pass back a specific
BDS (not necessarily bs->file). As the 8-way table is the
intended semantics, simplify the rest of the text to get rid of
the confusion.
ALLOCATED is always set by the block layer for convenience (drivers
do not have to worry about it). RAW is used only internally, but
by more than the raw driver. Document these additional items on
the driver callback.
Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-4-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:42 +0000 (19:05 -0500)]
qcow2: Use consistent switch indentation
Fix a couple of inconsistent indentations, before an upcoming
patch further tweaks the switch statements.
(best viewed with 'git diff -b').
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170507000552.20847-3-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sun, 7 May 2017 00:05:41 +0000 (19:05 -0500)]
qcow2: Nicer variable names in qcow2_update_snapshot_refcount()
In order to keep checkpatch happy when the next patch changes
indentation, we first have to shorten some long lines. The easiest
approach is to use a new variable in place of
'offset & L2E_OFFSET_MASK', except that 'offset' is the best name
for that variable. Change '[old_]offset' to '[old_]entry' to
make room.
While touching things, also fix checkpatch warnings about unusual
'for' statements.
Suggested by Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170507000552.20847-2-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sat, 29 Apr 2017 19:14:19 +0000 (14:14 -0500)]
tests: Add coverage for recent block geometry fixes
Use blkdebug's new geometry constraints to emulate setups that
have needed past regression fixes: write zeroes asserting
when running through a loopback block device with max-transfer
smaller than cluster size, and discard rounding away portions
of requests not aligned to preferred boundaries. Also, add
coverage that the block layer is honoring max transfer limits.
For now, a single iotest performs all actions, with the idea
that we can add future blkdebug constraint test cases in the
same file; but it can be split into multiple iotests if we find
reason to run one portion of the test in more setups than what
are possible in the other.
For reference, the final portion of the test (checking whether
discard passes as much as possible to the lowest layers of the
stack) works as follows:
qemu-io: discard 30M at 80000001, passed to blkdebug
blkdebug: discard 511 bytes at 80000001, -ENOTSUP (smaller than
blkdebug's 512 align)
blkdebug: discard 14371328 bytes at 80000512, passed to qcow2
qcow2: discard 739840 bytes at 80000512, -ENOTSUP (smaller than
qcow2's 1M align)
qcow2: discard 13M bytes at 77M, succeeds
blkdebug: discard 15M bytes at 90M, passed to qcow2
qcow2: discard 15M bytes at 90M, succeeds
blkdebug: discard 1356800 bytes at 105M, passed to qcow2
qcow2: discard 1M at 105M, succeeds
qcow2: discard 308224 bytes at 106M, -ENOTSUP (smaller than qcow2's
1M align)
blkdebug: discard 1 byte at 111457280, -ENOTSUP (smaller than
blkdebug's 512 align)
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-10-eblake@redhat.com
[mreitz: For cooperation with image locking, add -r to the qemu-io
invocation which verifies the image content] Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sat, 29 Apr 2017 19:14:18 +0000 (14:14 -0500)]
blkdebug: Add ability to override unmap geometries
Make it easier to simulate various unusual hardware setups (for
example, recent commits 3482b9b and b8d0a98 affect the Dell
Equallogic iSCSI with its 15M preferred and maximum unmap and
write zero sizing, or b2f95fe deals with the Linux loopback
block device having a max_transfer of 64k), by allowing blkdebug
to wrap any other device with further restrictions on various
alignments.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-9-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sat, 29 Apr 2017 19:14:17 +0000 (14:14 -0500)]
blkdebug: Simplify override logic
Rather than store into a local variable, then copy to the struct
if the value is valid, then reporting errors otherwise, it is
simpler to just store into the struct and report errors if the
value is invalid. This however requires that the struct store
a 64-bit number, rather than a narrower type. Likewise, setting
a sane errno value in ret prior to the sequence of parsing and
jumping to out: on error makes it easier for the next patch to
add a chain of similar checks.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170429191419.30051-8-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sat, 29 Apr 2017 19:14:16 +0000 (14:14 -0500)]
blkdebug: Add pass-through write_zero and discard support
In order to test the effects of artificial geometry constraints
on operations like write zero or discard, we first need blkdebug
to manage these actions. It also allows us to inject errors on
those operations, just like we can for read/write/flush.
We can also test the contract promised by the block layer; namely,
if a device has specified limits on alignment or maximum size,
then those limits must be obeyed (for now, the blkdebug driver
merely inherits limits from whatever it is wrapping, but the next
patch will further enhance it to allow specific limit overrides).
This patch intentionally refuses to service requests smaller than
the requested alignments; this is because an upcoming patch adds
a qemu-iotest to prove that the block layer is correctly handling
fragmentation, but the test only works if there is a way to tell
the difference at artificial alignment boundaries when blkdebug is
using a larger-than-default alignment. If we let the blkdebug
layer always defer to the underlying layer, which potentially has
a smaller granularity, the iotest will be thwarted.
Tested by setting up an NBD server with export 'foo', then invoking:
$ ./qemu-io
qemu-io> open -o driver=blkdebug blkdebug::nbd://localhost:10809/foo
qemu-io> d 0 15M
qemu-io> w -z 0 15M
Pre-patch, the server never sees the discard (it was silently
eaten by the block layer); post-patch it is passed across the
wire. Likewise, pre-patch the write is always passed with
NBD_WRITE (with 15M of zeroes on the wire), while post-patch
it can utilize NBD_WRITE_ZEROES (for less traffic).
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-7-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sat, 29 Apr 2017 19:14:15 +0000 (14:14 -0500)]
blkdebug: Refactor error injection
Rather than repeat the logic at each caller of checking if a Rule
exists that warrants an error injection, fold that logic into
inject_error(); and rename it to rule_check() for legibility.
This will help the next patch, which adds two more callers that
need to check rules for the potential of injecting errors.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-6-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sat, 29 Apr 2017 19:14:14 +0000 (14:14 -0500)]
blkdebug: Sanity check block layer guarantees
Commits 04ed95f4 and 1a62d0ac updated the block layer to auto-fragment
any I/O to fit within device boundaries. Additionally, when using a
minimum alignment of 4k, we want to ensure the block layer does proper
read-modify-write rather than requesting I/O on a slice of a sector.
Let's enforce that the contract is obeyed when using blkdebug. For
now, blkdebug only allows alignment overrides, and just inherits other
limits from whatever device it is wrapping, but a future patch will
further enhance things.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20170429191419.30051-5-eblake@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sat, 29 Apr 2017 19:14:13 +0000 (14:14 -0500)]
qemu-io: Switch 'map' output to byte-based reporting
Mixing byte offset and sector allocation counts is a bit
confusing. Also, reporting n/m sectors, where m decreases
according to the remaining size of the file, isn't really
adding any useful information; and reporting an offset at
both the front and end of the line, with large amounts of
whitespace, is pointless. Update the output to use byte
counts and shorter lines, then adjust the affected tests
(./check -qcow2 102, ./check -vpc 146).
Note that 'qemu-io map' is MUCH weaker than 'qemu-img map';
the former only shows which regions of the active layer are
allocated, without regards to where the allocation comes from
or whether the allocated portion is known to read as zero
(because it is using the weaker bdrv_is_allocated()); while the
latter (especially in --output=json mode) reports more details
from bdrv_get_block_status().
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170429191419.30051-4-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sat, 29 Apr 2017 19:14:12 +0000 (14:14 -0500)]
qemu-io: Switch 'alloc' command to byte-based length
For the 'alloc' command, accepting an offset in bytes but a length
in sectors, and reporting output in sectors, is confusing. Do
everything in bytes, and adjust the expected output accordingly.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170429191419.30051-3-eblake@redhat.com Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
Eric Blake [Sat, 29 Apr 2017 19:14:11 +0000 (14:14 -0500)]
qemu-io: Improve alignment checks
Several copy-and-pasted alignment checks exist in qemu-io, which
could use some minor improvements:
- Manual comparison against 0x1ff is not as clean as using our
alignment macros (QEMU_IS_ALIGNED) from osdep.h.
- The error messages aren't quite grammatically correct.
Suggested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Suggested-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20170429191419.30051-2-eblake@redhat.com Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com>
John Snow [Wed, 10 May 2017 17:39:45 +0000 (13:39 -0400)]
blockdev: use drained_begin/end for qmp_block_resize
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1447551
If one tries to issue a block_resize while a guest is busy
accessing the disk, it is possible that qemu may deadlock
when invoking aio_poll from both the main loop and the iothread.
Replace another instance of bdrv_drain_all that doesn't
quite belong.
Cc: qemu-stable@nongnu.org Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: ported over from qemu-nvme.git to mainline] Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anton Nefedov [Wed, 26 Apr 2017 08:33:15 +0000 (11:33 +0300)]
qemu-img: wait for convert coroutines to complete
On error path (like i/o error in one of the coroutines), it's required to
- wait for coroutines completion before cleaning the common structures
- reenter dependent coroutines so they ever finish
Cc: qemu-stable@nongnu.org Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Thu, 4 May 2017 16:52:40 +0000 (18:52 +0200)]
block: Fix write/resize permissions for inactive images
Format drivers for inactive nodes don't need write/resize permissions on
their bs->file and can share write/resize with another VM (in fact, this
is the whole point of keeping images inactive). Represent this fact in
the op blocker system, so that image locking does the right thing
without special-casing inactive images.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Thu, 4 May 2017 16:52:39 +0000 (18:52 +0200)]
block: Inactivate parents before children
The proper order for inactivating block nodes is that first the parents
get inactivated and then the children. If we do things in this order, we
can assert that we didn't accidentally leave a parent activated when one
of its child nodes is inactive.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Thu, 4 May 2017 16:52:38 +0000 (18:52 +0200)]
block: Drop permissions when migration completes
With image locking, permissions affect other qemu processes as well. We
want to be sure that the destination can run, so let's drop permissions
on the source when migration completes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Kevin Wolf [Thu, 4 May 2017 16:52:37 +0000 (18:52 +0200)]
block: New BdrvChildRole.activate() for blk_resume_after_migration()
Instead of manually calling blk_resume_after_migration() in migration
code after doing bdrv_invalidate_cache_all(), integrate the BlockBackend
activation with cache invalidation into a single function. This is
achieved with a new callback in BdrvChildRole that is called by
bdrv_invalidate_cache_all().
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Migration code activates all block driver nodes on the destination when
the migration completes. It does so by calling
bdrv_invalidate_cache_all() and blk_resume_after_migration(). There is
one code path for precopy and one for postcopy migration, resulting in
four function calls, which used to have three different failure modes.
This patch unifies the behaviour so that failure to activate all block
nodes is non-fatal, but the error message is logged and the VM isn't
automatically started. 'cont' will retry activating the block nodes.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Max Reitz [Wed, 3 May 2017 23:11:20 +0000 (01:11 +0200)]
iotests: Extend test 066
066 was supposed to be a test "for discarding preallocated zero
clusters", but it did so incompletely: While it did check the image
file's integrity after the operation, it did not confirm that the
clusters are indeed freed. This patch adds this test.
In addition, new cases for writing to preallocated zero clusters are
added.
Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 3 May 2017 23:11:19 +0000 (01:11 +0200)]
qcow2: Discard preallocated zero clusters
In discard_single_l2(), we completely discard normal clusters instead of
simply turning them into preallocated zero clusters. That means we
should probably do the same with such preallocated zero clusters:
Discard them instead of keeping them allocated.
Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 3 May 2017 23:11:18 +0000 (01:11 +0200)]
qcow2: Reuse preallocated zero clusters
Instead of just freeing preallocated zero clusters and completely
allocating them from scratch, reuse them.
We cannot do this in handle_copied(), however, since this is a COW
operation. Therefore, we have to add the new logic to handle_alloc() and
simply return the existing offset if it exists. The only catch is that
we have to convince qcow2_alloc_cluster_link_l2() not to free the old
clusters (because we have reused them).
Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Max Reitz [Wed, 3 May 2017 23:11:17 +0000 (01:11 +0200)]
qcow2: Fix preallocation size formula
When calculating the number of reftable entries, we should actually use
the number of refblocks and not (wrongly[1]) re-calculate it.
[1] "Wrongly" means: Dividing the number of clusters by the number of
entries per refblock and rounding down instead of up.
Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Tue, 2 May 2017 16:35:56 +0000 (00:35 +0800)]
file-posix: Add image locking to perm operations
This extends the permission bits of op blocker API to external using
Linux OFD locks.
Each permission in @perm and @shared_perm is represented by a locked
byte in the image file. Requesting a permission in @perm is translated
to a shared lock of the corresponding byte; rejecting to share the same
permission is translated to a shared lock of a separate byte. With that,
we use 2x number of bytes of distinct permission types.
virtlockd in libvirt locks the first byte, so we do locking from a
higher offset.
Suggested-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Tue, 2 May 2017 16:35:53 +0000 (00:35 +0800)]
block: Reuse bs as backing hd for drive-backup sync=none
Opening the backing image for the second time is bad, especially here
when it is also in use as the active image as the source. The
drive-backup job itself doesn't read from target->backing for COW,
instead it gets data from the write notifier, so it's not a big problem.
However, exporting the target to NBD etc. won't work, because of the
likely stale metadata cache.
Use BDRV_O_NO_BACKING in this case and manually set up the backing
BdrvChild.
Cc: qemu-stable@nongnu.org Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Tue, 2 May 2017 16:35:52 +0000 (00:35 +0800)]
tests: Disable image lock in test-replication
The COLO block replication architecture requires one disk to be shared
between primary and secondary, in the test both processes use posix file
protocol (instead of over NBD) so it is affected by image locking.
Disable the lock.
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Tue, 2 May 2017 16:35:50 +0000 (00:35 +0800)]
file-posix: Add 'locking' option
Making this option available even before implementing it will let
converting tests easier: in coming patches they can specify the option
already when necessary, before we actually write code to lock the
images.
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fam Zheng [Tue, 2 May 2017 16:35:45 +0000 (00:35 +0800)]
iotests: 085: Avoid image locking conflict
In the case where we test the expected error when a blockdev-snapshot
target already has a backing image, the backing chain is opened multiple
times. This will be a problem when we use image locking, so use a
different backing file that is not already open.
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* mjt/tags/trivial-patches-fetch: (23 commits)
tests: Remove redundant assignment
MAINTAINERS: Update paths for AioContext implementation
MAINTAINERS: Update paths for main loop
jazz_led: fix bad snprintf
tests: Ignore another built executable (test-hmp)
scripts: Switch to more portable Perl shebang
scripts/qemu-binfmt-conf.sh: Fix shell portability issue
virtfs: allow a device id to be specified in the -virtfs option
hw/core/generic-loader: Fix crash when running without CPU
virtio-blk: Remove useless condition around g_free()
qemu-doc: Fix broken URLs of amnhltm.zip and dosidle210.zip
use _Static_assert in QEMU_BUILD_BUG_ON
channel-file: fix wrong parameter comments
block: Make 'replication_state' an enum
util: Use g_malloc/g_free in envlist.c
qga: fix compiler warnings (clang 5)
device_tree: fix compiler warnings (clang 5)
usb-ccid: make ccid_write_data_block() cope with null buffers
tests: Ignore more test executables
Add 'none' as type for drive's if option
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Hajnoczi [Wed, 10 May 2017 15:22:10 +0000 (11:22 -0400)]
Merge remote-tracking branch 'danpb/tags/pull-qcrypto-2017-05-09-1' into staging
Merge qcrypto 2017/05/09 v1
# gpg: Signature made Tue 09 May 2017 09:43:47 AM EDT
# gpg: using RSA key 0xBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>"
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>"
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* danpb/tags/pull-qcrypto-2017-05-09-1:
crypto: qcrypto_random_bytes() now works on windows w/o any other crypto libs
crypto: move 'opaque' parameter to (nearly) the end of parameter list
List SASL config file under the cryptography maintainer's realm
Default to GSSAPI (Kerberos) instead of DIGEST-MD5 for SASL
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini [Wed, 3 May 2017 10:44:41 +0000 (12:44 +0200)]
jazz_led: fix bad snprintf
Detected by GCC 7's -Wformat-truncation. snprintf writes at most
2 bytes here including the terminating NUL, so the result is
truncated. In addition, the newline at the end is pointless.
Fix the buffer size and the format string.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The default NetBSD package manager is pkgsrc and it installs Perl
along other third party programs under custom and configurable prefix.
The default prefix for binary prebuilt packages is /usr/pkg, and the
Perl executable lands in /usr/pkg/bin/perl.
This change switches "/usr/bin/perl" to "/usr/bin/env perl" as it's
the most portable solution that should work for almost everybody.
Perl's executable is detected automatically.
This change switches -w option passed to the executable with more
modern "use warnings;" approach. There is no functional change to the
default behavior.
Signed-off-by: Kamil Rytarowski <n54@gmx.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Wed, 25 Jan 2017 20:45:17 +0000 (21:45 +0100)]
hw/core/generic-loader: Fix crash when running without CPU
When running QEMU with "-M none -device loader,file=kernel.elf", it
currently crashes with a segmentation fault, because the "none"-machine
does not have any CPU by default and the generic loader code tries
to dereference s->cpu. Fix it by adding an appropriate check for a
NULL pointer.
Reported-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Fam Zheng [Tue, 7 Feb 2017 13:27:22 +0000 (21:27 +0800)]
virtio-blk: Remove useless condition around g_free()
Laszlo spotted and studied this wasteful "if". He pointed out:
The original virtio_blk_free_request needed an "if" as it accesses one
field, since 671ec3f05655 ("virtio-blk: Convert VirtIOBlockReq.elem to
pointer", 2014-06-11); later on in f897bf751fbd ("virtio-blk: embed
VirtQueueElement in VirtIOBlockReq", 2014-07-09) the field became
embedded, so the "if" became unnecessary (at which point we were using
g_slice_free(), but it is the same.
Now drop it.
Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thomas Huth [Wed, 8 Mar 2017 12:13:25 +0000 (13:13 +0100)]
qemu-doc: Fix broken URLs of amnhltm.zip and dosidle210.zip
There are some broken URLs in the qemu-doc which reference tools that
are not available at their original location anymore. Fortunately, they
have been mirrored to archive.org, so point to that location instead.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
QEMU_BUILD_BUG_ON should use C11's _Static_assert, if the compiler supports it,
to provide more readable messages on failure.
We check for _Static_assert in configure, and set CONFIG_STATIC_ASSERT
accordingly. QEMU_BUILD_BUG_ON invokes _Static_assert if CONFIG_STATIC_ASSERT
is defined, and reverts to the old way otherwise.
That way, systems without C11 conforming compiler will still have the old
messages, as verified by intentionally breaking the configure check.
the following example output was generated by inverting the condition in
QEMU_BUILD_BUG_ON:
without _Static_assert:
> In file included from /qemu/include/qemu/osdep.h:36:0,
> from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:89:12: error: negative width in bit-field ‘<anonymous>’
> struct { \
> ^
> /qemu/include/qemu/compiler.h:96:38: note: in expansion of macro QEMU_BUILD_BUG_ON_STRUCT’
> #define QEMU_BUILD_BUG_ON(x) typedef QEMU_BUILD_BUG_ON_STRUCT(x) \
> ^~~~~~~~~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
> QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \
> ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
> atomic_load_acquire(ptr)
> ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
> bool finished = atomic_mb_read(&gei->finished);
> ^~~~~~~~~~~~~~
with _Static_assert:
> In file included from /qemu/include/qemu/osdep.h:36:0,
> from /qemu/qga/commands.c:13:
> /qemu/qga/commands.c: In function ‘qmp_guest_exec_status’:
> /qemu/include/qemu/compiler.h:94:30: error: static assertion failed: "not expecting: sizeof(*&gei->finished) > sizeof(void *)"
> #define QEMU_BUILD_BUG_ON(x) _Static_assert(!(x), #x)
> ^
> /qemu/include/qemu/atomic.h:146:5: note: in expansion of macro ‘QEMU_BUILD_BUG_ON’
> QEMU_BUILD_BUG_ON(sizeof(*ptr) > sizeof(void *)); \
> ^~~~~~~~~~~~~~~~~
> /qemu/include/qemu/atomic.h:417:5: note: in expansion of macro ‘atomic_load_acquire’
> atomic_load_acquire(ptr)
> ^~~~~~~~~~~~~~~~~~~
> /qemu/qga/commands.c:160:21: note: in expansion of macro ‘atomic_mb_read’
> bool finished = atomic_mb_read(&gei->finished);
> ^~~~~~~~~~~~~~
Signed-off-by: Andreas Grapentin <andreas@grapentin.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
crypto: qcrypto_random_bytes() now works on windows w/o any other crypto libs
If no crypto library is included in the build, QEMU uses
qcrypto_random_bytes() to generate random data. That function tried to open
/dev/urandom or /dev/random and if opening both files failed it errored out.
Those files obviously do not exist on windows, so there the code uses
CryptGenRandom().
Furthermore there was some refactoring and a new function
qcrypto_random_init() was introduced. If a proper crypto library (gnutls or
libgcrypt) is included in the build, this function does nothing. If neither
is included it initializes the (platform specific) handles that are used by
qcrypto_random_bytes().
Either:
* a handle to /dev/urandom | /dev/random on unix like systems
* a handle to a cryptographic service provider on windows
Signed-off-by: Geert Martin Ijewski <gm.ijewski@web.de> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
List SASL config file under the cryptography maintainer's realm
No one is listed as maintainer for qemu.sasl. It is used by the
VNC server for SASL auth, but since it is cryptography related,
list it under the crytography maintainer's realm, rather than
under the UI maintainer.
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Default to GSSAPI (Kerberos) instead of DIGEST-MD5 for SASL
RFC 6331 documents a number of serious security weaknesses in
the SASL DIGEST-MD5 mechanism. As such, QEMU should not be
using or recommending it as a default mechanism for VNC auth
with SASL.
GSSAPI (Kerberos) is the only other viable SASL mechanism that
can provide secure session encryption so enable that by defalt
as the replacement. If users have TLS enabled for VNC, they can
optionally decide to use SCRAM-SHA-1 instead of GSSAPI, allowing
plain username and password auth.
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
sockets: Limit SocketAddressLegacy to external interfaces
SocketAddressLegacy is a simple union, and simple unions are awkward:
they have their variant members wrapped in a "data" object on the
wire, and require additional indirections in C. SocketAddress is the
equivalent flat union. Convert all users of SocketAddressLegacy to
SocketAddress, except for existing external interfaces.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
[Minor editing accident fixed, commit message and a comment tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
sockets: Rename SocketAddress to SocketAddressLegacy
The next commit will rename SocketAddressFlat to SocketAddress, and
the commit after that will replace most uses of SocketAddressLegacy by
SocketAddress, replacing most of this commit's renames right back.
Note that checkpatch emits a few "line over 80 characters" warnings.
The long lines are all temporary; the SocketAddressLegacy replacement
will shorten them again.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
QAPI_CLONE() returns a newly allocated QAPI object. Inconvenient when
we want to clone into an existing object. QAPI_CLONE_MEMBERS() does
exactly that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-4-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
sockets: Prepare inet_parse() for flattened SocketAddress
I'm going to flatten SocketAddress: rename SocketAddress to
SocketAddressLegacy, SocketAddressFlat to SocketAddress, eliminate
SocketAddressLegacy except in external interfaces.
inet_parse() returns a newly allocated InetSocketAddress. Lift the
allocation from inet_parse() into its caller socket_parse() to prepare
for flattening SocketAddress.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1493192202-3184-3-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
[Straightforward rebase]
projects / qemu-xen.git / log