We can also avoid having a fallback value for the pattern: that
made sense when the implementation was coming from gnulib, as
they wouldn't be able to know in advance if the user would need
to provide their own exclude patterns, but that scenario is no
longer relevant to us.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Andrea Bolognani [Mon, 23 May 2022 14:12:20 +0000 (16:12 +0200)]
syntax-check: Remove sc_copyright_usage exception
The pattern in build-aux/syntax-check.mk is written specifically
so that it won't match itself, which makes having an exception
for the file unnecessary.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Andrea Bolognani [Mon, 23 May 2022 13:30:29 +0000 (15:30 +0200)]
syntax-check: Drop sc_bindtextdomain check
This is one of the standard checks that we have inherited from
gnulib, but it's not applicable to libvirt because we don't want
plain bindtextdomain() to be used: virGettextInitialize() is our
own private API that should be used instead.
The sc_gettext_init check ensures that our private API is used
in all the places where it makes sense, and the sc_bindtextdomain
check was disabled entirely via a blanket exception. Drop it
instead of keeping dead code around.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Mon, 23 May 2022 15:17:02 +0000 (17:17 +0200)]
qemu_hotplug: Deny changing @rss and @rss_hash_report attributes of virtio vNICs
We have virDomainUpdateDeviceFlags() API that allows changing of
some attributes of a device whilst domain is still running (e.g.
setting different QoS, link state change on vNICs). But only very
limited set of attributes can be changed and we have to check
whether user isn't trying to sneak in a change that's not
allowed. Well, in case of a virtio vNIC we forgot to check for
@rss and @rss_hash_report attributes of <driver/>.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2082540 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Laine Stump <laine@redhat.com>
Boris Fiuczynski [Mon, 23 May 2022 15:56:21 +0000 (17:56 +0200)]
nodedev: prevent internal error on dev_busid parse
As "none" is a legal value represented in the sysfs attribute dev_busid
this patch prevents libvirt from incorrectly reporting an internal error.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Suggested-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
qemuxml2argvtest.c: use CAPS_ARCH_LATEST() with pseries-cpu-compat-power9
Use the newly added ARG_CAPS_HOST_CPU_MODEL to set which host CPU we
expect the test to use - the test should fail when using a POWER8 host
cpu but complete when using a POWER9 host cpu.
Two new macros were added because we will be adding similar tests in the
near future when adding support for the Power10 chip.
Reviewed-by: Martin Kletzander <mkletzan@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
When loading a latest caps for an arch for the first time the following
occurs in testQemuInfoInitArgs():
- the caps file is located. It's not in the cache since it's the first time
it's being read;
- the cachecaps are retrieved using qemuTestParseCapabilitiesArch() and
stored in the capscache;
- FLAG_REAL_CAPS is set and regular flow continues.
Loading the same latest caps for the second time the caps are loaded from the
cache, skipping qemuTestParseCapabilitiesArch(). By skipping this function it
means that it also skips virQEMUCapsLoadCache() and, more relevant to
our case, virQEMUCapsInitHostCPUModel(). This function will use the
current arch and cpuModel settings to write the qemuCaps that are being
stored in the cache. And we're also setting FLAG_REAL_CAPS, meaning that
we won't be updating the qemucaps host model via testUpdateQEMUCaps() as
well.
This has side-effects such as:
- the first time the latest caps for an arch is loaded determines the
cpuModel it'll use during the current qemuxml2argvtest run. For
example, when running all tests, the first time the latest ppc64 caps
are read is on "disk-floppy-pseries" test. Since the current host arch
at this point is x86_64, the cpuModel that will be set for this
capability is "core2duo";
- every other latest arch test will use the same hostCPU as the first
one set since we read it from the cache after the first run.
qemuTestSetHostCPU() makes no difference because we won't update the
host model due to FLAG_REAL_CAPS being set. Using the previous example,
every other latest ppc64 test that will be run will be using the
"core2duo" cpuModel.
Using fake capabilities (e.g. using DO_TEST()) prevents FLAG_REAL_CAPS to
be set, meaning that the cpuModel will be updated using the current
settings the test is being ran due to testUpdateQEMUCaps().
Note that not all latest caps arch tests care about the cpuModel being
set to an unexpected default cpuModel. But some tests will care, e.g.
"pseries-cpu-compat-power9", and changing it from DO_TEST() to
DO_TEST_CAPS_ARCH_LATEST() will make it fail every time the
"disk-floppy-pseries" is being ran first.
One way of fixing it is to rethink all the existing logic, for example
not setting FLAG_REAL_CAPS for latest arch tests. Another way is
presented here. ARGS_CAPS_HOST_CPU_MODEL is a new testQemuInfo arg that
allow us to set any specific host CPU model we want when running latest
arch caps tests. This new arg can then be used when converting existing
DO_TEST() testcases to DO_TEST_CAPS_ARCH_LATEST() that requires a
specific host CPU setting to be successful, which we're going to do in
the next patch with "pseries-cpu-compat-power9".
Reviewed-by: Martin Kletzander <mkletzan@redhat.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Jiri Denemark [Mon, 23 May 2022 14:31:51 +0000 (16:31 +0200)]
qemu: Do not return NULL when qemuMigrationSrcBegin succeeds
My recent commit v8.3.0-201-gc500955e95 tried to fix a regression which
would cause the function to return success even if virCloseCallbacksSet
failed. But due to a strange code flow in the function introduced an
opposite regression. The function would return NULL on success when
called without VIR_MIGRATE_CHANGE_PROTECTION flag.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Boris Fiuczynski [Fri, 13 May 2022 10:31:15 +0000 (12:31 +0200)]
nodedev: add optional device address of channel device to css device
Add the new introduced sysfs attribute dev_busid which provides the address
of the device in the subchannel independent from the bound device driver.
It is added if available in the sysfs as optional channel_dev_addr element into
the css device capabilty providing the ccw deivce address attributes cssid,
ssid and devno.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Boris Fiuczynski [Fri, 13 May 2022 10:31:10 +0000 (12:31 +0200)]
util: add virCCWDeviceAddressFromString to virccw
Add a method to parse a ccw device address from a string.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Boris Fiuczynski [Fri, 13 May 2022 10:31:00 +0000 (12:31 +0200)]
nodedev: fix reported error msg in css cap XML parsing
Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Mon, 25 Apr 2022 08:31:56 +0000 (10:31 +0200)]
remote_daemon: Don't run virStateCleanup() if virStateReload() is still running
When a SIGHUP is received a thread is spawned that runs
virStateReload(). However, if SIGINT is received while the former
thread is still running then we may get into problematic
situation: the cleanup code in main() sees drivers initialized
and thus calls virStateCleanup(). So now we have two threads, one
running virStateReload() the other virStateCleanup(). In this
situation it's very likely that a race condition occurs and
either of threads causes SIGSEGV.
To fix this, unmark drivers as initialized in the
virStateReload() thread for the time the function runs.
Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2075837 Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Andrea Bolognani [Mon, 23 May 2022 08:31:02 +0000 (10:31 +0200)]
apparmor: Allow locking AAVMF firmware
We already allow this for OVMF.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/312 Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Andrea Bolognani [Mon, 16 May 2022 14:46:16 +0000 (16:46 +0200)]
po: Drop prefixes from POTFILES.in
Commit 8beb7fdd0e23 changed the handling of POTFILES so that it
could cope with files being located in either the source or build
directory: it did so by adding @SRCDIR@ and @BUILDDIR@
respectively at the beginning of each line, and then converting
them back to the actual values when generating POTFILES from
POTFILES.in.
Later, commit c6a0d3ff8b4e started passing --directory to
xgettext, which resulted in the tool being able to locate files
regardless of whether they are in the source or build directory.
However, @SRCDIR@ and @BUILDDIR@ were still added to POTFILES.in
only to be stripped when generating POTFILES.
Simplify things by not storing information that we know we're
going to discard later.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Andrea Bolognani [Wed, 18 May 2022 09:34:40 +0000 (11:34 +0200)]
po: Stop using 'glib' preset for i18n.gettext()
Due to a bug in meson versions earlier than 0.60, the
--add-comments that's part of the 'glib' preset and the
--add-comments=TRANSLATORS: that we add ourselves might be
passed to xgettext in the wrong order, resulting in a bunch of
comments that we don't care about being added to the potfile.
Most of the options included in the 'glib' preset are not
applicable to libvirt anyway, so just stop using the preset and
pass a few extra options explicitly instead.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The xml variable was used to hold the return value and thus had to be
unset when an error happened after xml was already non-NULL. Such code
may be quite confusing though and we usually avoid it by not storing
anything to a return variable until everything succeeded.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Max Goodhart [Wed, 11 May 2022 22:08:39 +0000 (15:08 -0700)]
Allow VM to read sysfs PCI config, revision files
This fixes a blank screen when viewing a VM with virtio graphics and
gl-accelerated Spice display on Ubuntu 22.04 / libvirt 8.0.0 / qemu 6.2.
Without these AppArmor permissions, the libvirt error log contains
repetitions of:
qemu_spice_gl_scanout_texture: failed to get fd for texture
This appears to be similar to this GNOME Boxes issue:
https://gitlab.gnome.org/GNOME/gnome-boxes/-/issues/586
Fixes: https://launchpad.net/bugs/1972075 Signed-off-by: Max Goodhart <c@chromakode.com> Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Jiri Denemark [Wed, 18 May 2022 07:14:15 +0000 (09:14 +0200)]
util: Do not report useless error in virPortAllocatorRelease
If the port allocator bitmap does not have enough bits to keep the state
of the port we're going to release, the port is not reserved and thus is
trivially released without doing anything. No need to report an error in
such case.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
The USB device redirection works in a similar way as Spice. The
underlying 'dbus' channel is set to "org.qemu.usbredir" by default for
the client to identify the channel purpose (as specified in -display
dbus documentation).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
This implementation reports only Unix bus address using the URI format
proposed in https://gitlab.freedesktop.org/dbus/dbus/-/issues/348.
We prefer a URI form over the D-Bus address form, since all other
display protocols use a URI, allowing to distinguish between protocols
and making client implementation simpler.
Other transports (for example TCP) are not yet handled.
The client is assumed to know what to lookup on the bus (the bus name,
path & interface of the VM, eventually matching its UUID)
P2P mode doesn't report any available URI.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
By default, libvirt will start a private bus and tell QEMU to connect to
it. Instead, a D-Bus "address" to connect to can be specified, or the
p2p mode enabled.
D-Bus display works best with GL & a rendernode, which can be specified
with <gl> child element.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Thu, 19 May 2022 07:54:16 +0000 (09:54 +0200)]
remoteOpenConn: Pass correct variable to virConnectSetIdentity()
The remoteOpenConn() function was refactored recently. As a part
of that new variable @newconn was introduced which holds
virConnect object as it's being gradually constructed throughout
the function. At the very end, when everything succeeded the
variable is stolen into passed @conn. However, there was one
line missed in the refactor which still access the @conn instead
of @newconn leading to a NULL dereference.
Fixes: f7c422993e4c7ca3e58b1d0d69f4772851af399f Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com>
Peter Krempa [Wed, 18 May 2022 08:49:34 +0000 (10:49 +0200)]
virGetConnectGeneric: Fix memleak of 'identparams' when connecting between split daemons
The 'identparams' typed parameter list obtained from
virIdentityGetParameters is leaked when called from
'virGetConnectGeneric'.
Use 'virTypedParamListFromParams' to absorb it into a virTypedParamList
which can be autofreed.
Note that the memleak is observable only when running in split-daemon
mode.
Closes: https://gitlab.com/libvirt/libvirt/-/issues/314 Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Mon, 2 May 2022 13:17:31 +0000 (15:17 +0200)]
lxc: Store 'driver' in VM private data
Similarly to the qemu driver if we store the immutable driver pointer in
the VM private data struct we don't have to questionably pass it through
opaque pointers to callbacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 2 May 2022 13:17:31 +0000 (15:17 +0200)]
bhyve: Store 'driver' in VM private data
Similarly to the qemu driver if we store the immutable driver pointer in
the VM private data struct we don't have to questionably pass it through
opaque pointers to callbacks.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Tue, 17 May 2022 09:04:40 +0000 (11:04 +0200)]
qemu: fd: Fix documentation for FD set related functions
When dealing with fdsets only we don't need to pass the FD first as we
now generate fdset name directly. Also there are no more caveats in
passing multiple FDs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 16 May 2022 14:25:31 +0000 (16:25 +0200)]
qemu: fd: Remove support for 'direct' fd passing from 'qemuFDPass'
This finishes the separation of the fdset and direct helpers. Remove
'qemuFDPassNewDirect' and all internals which were applicable only in
direct mode.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Peter Krempa [Mon, 16 May 2022 12:57:57 +0000 (14:57 +0200)]
qemu: fd: Add a distinct set of APIs for 'direct' fd passing mode
Originally I envisioned a common set of APIs for both FD passing
approaches but it turns out they are not really compatible enough for it
to make sense to use one set of APIs.
As of such introduce a distinct set of APIs for the 'direct' mode, which
will later be used to convert all places that currently use
'qemuFDPassNewDirect' and later clean up the existing APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
projects / libvirt.git / log