Michal Privoznik [Wed, 15 Apr 2015 09:45:47 +0000 (11:45 +0200)]
Cleanup "/sys/class/net" usage
Throughout the code, we have several places need to construct a path
somewhere in /sys/class/net/... They are not consistent and nearly
each code piece invents its own way how to do it. So unify this by:
1) use virNetDevSysfsFile() wherever possible
2) At least use common macro SYSFS_NET_DIR declared in virnetdev.h at
the rest of places which can't go with 1)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 15 Apr 2015 08:09:52 +0000 (10:09 +0200)]
tests: Add virnetdevtestdata to EXTRA_DIST
In one of my previous commits (49ed6cff9) I've introduced a test
among with some files stored under virnetdevtestdata folder.
While this works perfectly within a git tree, the folder was not
getting into .tar.gz and therefore the dist-check would fail.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Eric Blake [Tue, 14 Apr 2015 22:15:06 +0000 (16:15 -0600)]
virsh: fix regression in 'virsh event' by domain
Commit a0670ae caused a regression in 'virsh event' and
'virsh qemu-monitor-event' - if a user tries to filter the
command to a specific domain, an error message is printed:
$ virsh event dom --loop
error: internal error: virsh qemu-monitor-event: no domain VSH_OT_DATA option
and then the command continues as though no domain had been
supplied (giving events for ALL domains, instead of the
requested one). This is because the code was incorrectly
assuming that all "domain" options would be supplied via a
mandatory VSH_OT_DATA, even though "domain" is optional for
these two commands, so we had changed them to VSH_OT_STRING
to quit failing for other reasons (ever since it was decided
that VSH_OT_DATA and VSH_OT_STRING should no longer be
synonyms).
In looking at the situation, though, the code for looking up
a domain was making a pointless check for whether the option
exists prior to finding the option's string value, as
vshCommandOptStringReq does just fine at reporting any errors
when looking up a string whether or not the option was present.
So this is a case of regression fixing by pure code deletion :)
Michal Privoznik [Wed, 15 Apr 2015 13:01:02 +0000 (15:01 +0200)]
virPidFileConstructPath: Drop useless VIR_FREE()
If a virAsprintf() within the function fails, we call VIR_FREE()
over @rundir variable and jump onto cleanup label, where it is
freed again. It doesn't hurt, but not make much sense too.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Tue, 14 Apr 2015 15:08:23 +0000 (17:08 +0200)]
qemu: monitor: Fix qemuMonitorGetAllBlockStatsInfo with HMP
Commit f6563bc3 introduced HMP impl of the function (so that a different
uglier function could be removed). Before the HMP code is called there's
a leftover check that the monitor is JSON which inhibits the code from
working.
Even though we have a mutex mechanism so that two clients don't spawn
two daemons, it's not strong enough. It can happen that while one
client is spawning the daemon, the other one fails to connect.
Basically two possible errors can happen:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': Connection refused
or:
error: Failed to connect socket to '/home/mprivozn/.cache/libvirt/libvirt-sock': No such file or directory
The problem in both cases is, the daemon is only starting up, while we
are trying to connect (and fail). We should postpone the connecting
phase until the daemon is started (by the other thread that is
spawning it). In order to do that, create a file lock 'libvirt-lock'
in the directory where session daemon would create its socket. So even
when called from multiple processes, spawning a daemon will serialize
on the file lock. So only the first to come will spawn the daemon.
Tested-by: Richard W. M. Jones <rjones@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Two non-static functions in virjson.c were missing their export info in
libvirt_private.syms, so they couldn't be used anywhere it the code (and
that's about to get changed).
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
closeCallback is already lockable, initialize it as such
Luckily we are allocating structs as clean memory and
PTHREAD_MUTEX_INITIALIZER is "{ 0 }", so nothing happened, but it should
still be created as lockable object.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
John Ferlan [Thu, 2 Apr 2015 16:48:04 +0000 (12:48 -0400)]
storage: Add duplicate source pool for Gluster pool def
Check the proposed pool source host XML definition against existing gluster
pools to ensure the incoming definition doesn't use the same source dir and
soure host XML definition as an existing pool.
John Ferlan [Thu, 2 Apr 2015 16:46:00 +0000 (12:46 -0400)]
storage: Add duplicate host check for Sheepdog pool def
Check the proposed pool source host XML definition against existing sheepdog
pools to ensure the incoming definition doesn't use the same source host XML
definition as an existing pool.
John Ferlan [Mon, 30 Mar 2015 23:59:26 +0000 (19:59 -0400)]
storage: Refactor iSCSI Source matching
Create a separate iSCSI Source matching subroutine. Makes the calling
code a bit cleaner as well as sets up for future patches which need to
do better source hosts[0].name processing/checking.
As part of the effort the logic will be inverted from a multi-level
if statement to a series of single level checks for better readability
and further separation
sanlock: Use VIR_ERR_RESOURCE_BUSY if sanlock_acquire fails
When acquiring resource via sanlock fails, we would report it as
VIR_ERR_INTERNAL_ERROR, which is not very friendly to applications using
libvirt. Moreover, the lockd driver would report the same failure as
VIR_ERR_RESOURCE_BUSY, which looks better.
Unfortunately, in sanlock driver we don't really know if acquiring the
resource failed because it was already locked or there was another
reason behind. But the end result is the same and I think using
VIR_ERR_RESOURCE_BUSY reason for all acquire failures is still better
than what we have now.
Eric Blake [Tue, 14 Apr 2015 19:15:06 +0000 (13:15 -0600)]
build: include correct header for time()
Found by ./autobuild.sh during a mingw cross-compile:
Commit 8a96e87 was not innocuous - glibc happens to leak the
definition of time() through other headers, so that even without
<sys/select.h>, virrandom.c compiled just fine. But on mingw,
we were not so lucky; <sys/select.h> was important for its side
effect of dragging in <time.h>, and we now have nothing providing
the declaration of time():
../../src/util/virrandom.c: In function 'virRandomOnceInit':
../../src/util/virrandom.c:65:5: error: implicit declaration of function 'time' [-Werror=implicit-function-declaration]
unsigned int seed = time(NULL) ^ getpid();
^
../../src/util/virrandom.c:65:5: error: nested extern declaration of 'time' [-Werror=nested-externs]
John Ferlan [Tue, 14 Apr 2015 11:28:57 +0000 (07:28 -0400)]
qemu: Adjust the prototype to match the function
Changing the prototype to not have "int *index" since we'll soon be
disallowing index as a name. Curiously the original commit (a4504ac)
for the function used 'int idx' in the function - so they didn't match.
Now they do.
Huanle Han [Thu, 2 Apr 2015 15:56:19 +0000 (23:56 +0800)]
hostdev: fix loop index error when resetvfnetconfig
The variable 'last_processed_hostdev_vf' indicates index of the last
successfully configed vf. When resetvfnetconfig because of failure,
hostdevs[last_processed_hostdev_vf] should also be reset.
Huanle Han [Tue, 7 Apr 2015 18:40:15 +0000 (02:40 +0800)]
qemu: fix index error when clean up vport profile
1. 'last_good_net' indicates the index of last successfully configured
net. so def->nets[last_good_net] should also be clean up if error occurs.
2. if error occurs in 'virNetDevMacVLanVPortProfileRegisterCallback'
(second 'goto err_exit' in loop), we should also do
'virNetDevVPortProfileDisassociate' cleanup for the
'virNetDevVPortProfileAssociate'(first code block in loop). So we should
consider the net is successfully configured after first code block in
loop finishes.
Peter Krempa [Wed, 1 Apr 2015 17:00:20 +0000 (19:00 +0200)]
qemu: drivePivot: Fix assumption when 'block-job-complete' fails
QEMU does not abandon the mirror. The job carries on in the synchronised
phase and it might be either pivoted again or cancelled. The commit
hints that the described behavior was happening in a downstream version.
If the command returns false there are two possible options:
1) qemu did not reach the point where it would ask the block job to
pivot
2) pivotting failed in the actual qemu coroutine
If either of those would happen we return failure and reset the
condition that waits for the block job to complete. This makes the API
fail but in case where qemu would actually abandon the mirror the fact
is notified via the event and handled asynchronously.
Peter Krempa [Wed, 1 Apr 2015 07:47:04 +0000 (09:47 +0200)]
qemu: blockjob: Split qemuDomainBlockJobSetSpeed from qemuDomainBlockJobImpl
qemuDomainBlockJobImpl become an unmaintainable mess over the years of
adding new stuff to it. This patch starts splitting up individual
functions from it until it can be killed entirely.
In bulk this will add lines of code rather than delete them but it will
be traded for maintainability.
Peter Krempa [Tue, 31 Mar 2015 15:13:21 +0000 (17:13 +0200)]
qemu: monitor: Extract handling of JSON block job error codes
My intention is to split qemuMonitorJSONBlockJob() into simpler separate
functions for every block job type. Since the error handling code is the
same for all block jobs, this patch extracts the code into a separate
function that will later be reused in more places.
With the new helper qemuMonitorJSONErrorIsClass we can save a few
function calls as we can extract the error object once.
Peter Krempa [Thu, 9 Apr 2015 09:26:43 +0000 (11:26 +0200)]
qemu: monitor: json: Refactor error code class checker
Split out the function that checks the actual error class string into a
separate helper as it will be useful later and refactor
qemuMonitorJSONHasError to return bool type and remove few useless
checks.
Basically virJSONValueObjectHasKey are useless here since the next call
to virJSONValueObjectGet is checking the return value again (which can't
fail at that point). By removing the first check we save a function
call.
Peter Krempa [Tue, 7 Apr 2015 18:44:15 +0000 (20:44 +0200)]
qemu: Fix condition for checking vcpu when pinning vcpus
Previously we checked that the vcpu we are trying to set is in range of
the number of threads presented by qemu. The problem is that if the VM
is offline the count is 0. Since the condition subtracted 1 from the
count the number would overflow and the check would never trigger.
Change the condition for more sensible ones with specific error
messages.
Peter Krempa [Tue, 7 Apr 2015 18:09:04 +0000 (20:09 +0200)]
conf: Refactor virDomainVcpuPinDefParseXML
Refactor the code to parse the vcpupin in a similar way the iothreadpin
code is now structured. This allows to get rid of some very strange
conditions and error messages.
Additionally since a existing bug
( https://bugzilla.redhat.com/show_bug.cgi?id=1208434 ) allows to add
vcpupin definitions for vcpus that don't exist, this patch makes the
parser to ignore all vcpupins that don't have a matching vCPU in the
definition rather than just offlined ones.
Peter Krempa [Fri, 10 Apr 2015 08:48:34 +0000 (10:48 +0200)]
lib: snapshot: Explain that only one layer of images is inserted
When creating a snapshot with _REUSE_EXTERNAL when the pre-created image
does not directly link to the current active layer libvirt would
re-detect the backing chain incorrectly and it would not match with
qemu's view. Since the configuration is an operator mistake, document
that only the top layer image gets inserted.
Parallels Cloud Server supports block devices and virtual NIC
live attachment. I implemented that function for block devices so
OpenStack volume attachment is now works.
Signed-off-by: Alexander Burluka <aburluka@parallels.com>
OpenStack needs disk serial number setup because
nova boot --block-device-mapping command generates that param in
libvirt xml. I took QEMU libvirt driver behavior as a base.
QEMU driver skips inability to set serial and continues work.
So Parallels driver will ignore this param too and let domain
boot.
Erik Skultety [Fri, 10 Apr 2015 09:11:21 +0000 (11:11 +0200)]
virBitmap: Place virBitmapIsAllClear check after virBitmapParse calls
This patch adds checks for empty bitmaps right after the calls of
virBitmapParse. These only include spots where set API's are called and
where domain's XML is parsed.
Also, it partially reverts commit 983f5a which added a check for
invalid nodeset "0,^0" into virBitmapParse function. This change broke
the logic, as an empty bitmap should not cause an error.
When pre-creating storage for domains, we need to find corresponding
disk in the XML on the destination (domain XML may differ there, e.g.
disk is accessible under different path). For better debugging, I'm
printing all info I received on a disk. But there was a typo when
printing the disk capacity: "%lluu" instead of "%llu".
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Xing Lin [Thu, 9 Apr 2015 22:02:02 +0000 (16:02 -0600)]
qemu_migration.c: sleep first before checking for migration status.
The problem with the previous implementation is,
even when qemuMigrationUpdateJobStatus() detects a migration job
has completed, it will do a sleep for 50 ms (which is unnecessary
and only adds up to the VM pause time).
Signed-off-by: Xing Lin <xinglin@cs.utah.edu> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
John Ferlan [Wed, 8 Apr 2015 13:25:47 +0000 (09:25 -0400)]
qemu: qemuDomainHotplugVcpus - separate out pin adjustment code
Future IOThread setting patches would copy the code anyway, so create
and generalize the adding of pindef for the vcpu and the pinning of the
thread into their own APIs.
Luyao Huang [Tue, 10 Mar 2015 00:04:58 +0000 (20:04 -0400)]
util: Update virNetDevGetIPAddress to get IPv6 addresses
Add static virNetDevGetifaddrsAddress to attempt to get the interface
IP address. If getifaddrs is not supported, fall back to
virNetDevGetIPv4AddressIoctl to get the IP address.
This allows IPv6 addresses to be used for <listen type='network>
with device-backed networks.
John Ferlan [Tue, 10 Mar 2015 00:04:57 +0000 (20:04 -0400)]
util: Replace virNetDevGetIPv4Address with virNetDevGetIPAddress
Rename it to virNetDevGetIPv4AddressIoctl and make
virNetDevGetIPAddress a wrapper around it, allowing
other ways of getting the address to be implemented,
and still falling back to the old method.
Signed-off-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Ján Tomko <jtomko@redhat.com>
parallels: fix virDomainDefineXML for domain in saved state
PCS doesn't store domain config in managed save state file.
It's forbidden to change config for VMs in this state.
It's possible to change config for containers, but after
restoring domain will have that new config, not a config,
which domain had at the moment of virDomainManagedSave.
So we need to handle this case differently from other states.
Let's forbid this operation, if config is changed and if it's
not changed - just do nothing.
Openstack/nova calls virDomainDefineXML on resume with
current domain config, so we can't forbid this operation
in managed save state.
conf: return proper default video type for parallels
Fix function virDomainVideoDefaultType for
parallels VMs and containers. It should return
VGA for VMs and VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for containers.
conf: add VIR_DOMAIN_VIDEO_TYPE_PARALLELS video type
We support VNC for containers to have the same
interface with VMs. At this moment it just renders
linux text console.
Of course we don't pass any physical devices and
don't emulate virtual devices. Our VNC server
renders text from terminal master and sends
input events from VNC client to terminal.
So add special video type VIR_DOMAIN_VIDEO_TYPE_PARALLELS
for these pseudo-devices.
We handle this parameter for VMs while defining
domains, so let's get this property from PCS and
set corresponding field of virDomainNetDef in
prlsdkLoadDomains function.
Call virDomainDefAddImplicitControllers to add disk
controllers, so virDomainDef, filled by this function
will look exactly like the one returned by virDomainDefParseString.
Implement virDomainManagedSave api function. In PCS
this feature called "suspend". You can suspend VM or
CT while it is in running or paused state. And after
resuming (or starting) it will have the same state, as
before suspend.
projects / libvirt.git / log