Klaus Jensen [Thu, 30 Jun 2022 07:21:14 +0000 (09:21 +0200)]
hw/i2c: add asynchronous send
Add an asynchronous version of i2c_send() that requires the slave to
explicitly acknowledge on the bus with i2c_ack().
The current master must use the new i2c_start_send_async() to indicate
that it wants to do an asynchronous transfer. This allows the i2c core
to check if the target slave supports this or not. This approach relies
on adding a new enum i2c_event member, which is why a bunch of other
devices needs changes in their event handling switches.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220601210831.67259-5-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-6-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Klaus Jensen [Thu, 30 Jun 2022 07:21:14 +0000 (09:21 +0200)]
hw/i2c: support multiple masters
Allow slaves to master the bus by registering a bottom halve. If the bus
is busy, the bottom half is queued up. When a slave has succesfully
mastered the bus, the bottom half is scheduled.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg : - fixed typos in commit log ]
Message-Id: <20220601210831.67259-4-its@irrelevant.dk> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-5-me@pjd.dev> Signed-off-by: Cédric Le Goater <clg@kaod.org>
aspeed_i2c_bus_is_master is checking if master mode is enabled in the I2C
bus controller's function-control register, not that slave mode is enabled
or something. The error here is that the guest is trying to trigger an I2C
master mode command while master mode is not enabled.
Fixes: ba2cccd64e90f342 ("aspeed: i2c: Add new mode support") Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220630045133.32251-4-me@pjd.dev> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Peter Delevoryas [Thu, 30 Jun 2022 07:21:13 +0000 (09:21 +0200)]
hw/i2c/aspeed: Fix DMA len write-enable bit handling
I noticed i2c rx transfers were getting shortened to "1" on Zephyr. It
seems to be because the Zephyr i2c driver sets the RX DMA len with the
RX field write-enable bit set (bit 31) to avoid a read-modify-write. [1]
/* 0x1C : I2CM Master DMA Transfer Length Register */
I think we should be checking the write-enable bits on the incoming
value, not checking the register array. I'm not sure we're even writing
the write-enable bits to the register array, actually.
MAX31785 is a PMBus compliant 6-Channel fan controller. It supports 6 fan
channels, 11 temperature sensors, and 6-Channel ADC to measure the remote
voltages. Datasheet can be found here:
https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
This initial version of the driver has skeleton and support for the
fan channels. Requests for temperature sensors, and ADC Channels the
are serviced with the default values as per the datasheet. No additional
instrumentation is done. NV Log feature is not supported.
Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-5-quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
hw/i2c: pmbus: Page #255 is valid page for read requests.
Current implementation of the pmbus core driver treats the read request
for page 255 as invalid request and sets the invalid command bit (bit 7)
in the STATUS_CML register. As per the PMBus specification it is a valid
request.
Refer to the PMBus specification, revision 1.3.1, section 11.10 PAGE,
on the page 58:
"Setting the PAGE to FFh means that all subsequent comands are to be
applied to all outputs.
Some commands, such as READ_TEMPERATURE, may use a common sensor but
be available on all pages of a device. Such implementations are the
decision of each device manufacturer or are specified in a PMBus
Application Profile. Consult the manufacturer's documents or the
Application Profile Specification as needed."
For e.g.,
The VOUT_MODE is a valid command for page 255 for maxim 31785 device.
refer to Table 1. PMBus Command Codes on page 14 in the datasheet.
https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
Fixes: 38870253f1d1 ("hw/i2c: pmbus: fix error returns and guard against out of range accesses") Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com> Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Reviewed-by: Titus Rwantare <titusr@google.com> Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-4-quic_jaehyoo@quicinc.com> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Cédric Le Goater [Thu, 30 Jun 2022 07:21:13 +0000 (09:21 +0200)]
aspeed/smc: Fix potential overflow
Coverity warns that "ssi_transfer(s->spi, 0U) << 8 * i" might overflow
because the expression is evaluated using 32-bit arithmetic and then
used in a context expecting a uint64_t.
Joel Stanley [Thu, 30 Jun 2022 07:21:13 +0000 (09:21 +0200)]
aspeed/hace: Accumulative mode supported
While the HMAC mode is not modelled, the accumulative mode is.
Accumulative mode is enabled by setting one of the bits in the HMAC
engine command mode part of the register, so fix the unimplemented check
to only look at the upper of the two bits.
Fixes: 5cd7d8564a8b ("aspeed/hace: Support AST2600 HACE") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627100816.125956-1-joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org>
Cédric Le Goater [Thu, 30 Jun 2022 07:21:13 +0000 (09:21 +0200)]
aspeed: Set the dram container at the SoC level
Currently, the Aspeed machines allocate a ram container region in
which the machine ram region is mapped. See commit ad1a9782186d
("aspeed: add a RAM memory region container"). An extra region is
mapped after ram in the ram container to catch invalid access done by
FW. That's how FW determines the size of ram. See commit ebe31c0a8ef7
("aspeed: add a max_ram_size property to the memory controller").
Let's move all the logic under the SoC where it should be. It will
also ease the work on multi SoC support.
Reviewed-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220623202123.3972977-1-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmK8FmsSHGxhdXJlbnRA
# dml2aWVyLmV1AAoJEPMMOL0/L7482EkP/19M/AAUkGqIdU9Dj7H46r+LEKtrT7Xu
# jNRDDrkhVQvx42mklSB+fO/ptMKUDgxvLs4mnuZFxM7SrTOb4h5jfZzyYjk73ENQ
# YZ/TLxRtxAfRCcGwso7NGyk85mwt+sBFKZXfW6qsfc9AjDphLUOblfSieeFegz69
# BUtzbMOPSMR7e54y6azJX3gCkxLytSXYgk4otSLTrL233sT7pnwPRdxKGzCTA5vs
# fRxKb4p/R05lWepcjrL2d2lB1TabsV0kqmNkHDvubVWlgyoK3Vt/1dzD1UP7CrvF
# WghlZWmxCHrmLlBb+VSDUa22kpfv5fi/feauuug+dya+s1Mlq8HZTL8VtjUJHwLL
# 92xRPeP/RfEJdoQDuMKXP9DWAAYM03HGgR37cE5NMDCyHG0XRKOJ+i2P7DQLVDjW
# QyWX6bX1WV6FovdwwMnZR9OclvKtsZnb1jlfj+G2DdKXpLliDH6DkFm8mPQTM1L7
# w53iMtK88erEc+NP6+fPbbZmySvDVUcLmcTiBceZK6Vjo4oTGNrAWP+VgjBTJaz+
# 71ulkJ6vo39ZnEQOUlWrL/yW+8sQNaeO1tO67HZZ8dgTvAnPwyvKq88jSMzGCNpz
# Wpcf4yVAEvU+fP3KkEaqQqmQeK/Vc+H6044O00tcLVICkpCdN/FwRjgfZanX9CIJ
# xQjxW5mkb1Z3
# =fgtJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 29 Jun 2022 02:37:55 PM +0530
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [undefined]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [undefined]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* tag 'trivial-branch-for-7.1-pull-request' of https://gitlab.com/laurent_vivier/qemu:
hw/i386/xen/xen-hvm: Inline xen_piix_pci_write_config_client() and remove it
hw/i386/xen/xen-hvm: Allow for stubbing xen_set_pci_link_route()
hw/ide/atapi.c: Correct typos (CD-CDROM -> CD-ROM)
common-user: Only compile the common user code if have_user is set
hw/pci-host/i440fx: Remove unused parameter from i440fx_init()
MAINTAINERS: Add softmmu/runstate.c to "Main loop"
trivial typos: namesapce
Trivial: 3 char repeat typos
util: Return void on iova_tree_remove
qom/object: Remove circular include dependency
vga: avoid crash if no default vga card
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Merge tag 'pull-block-2022-06-14-v2' of https://gitlab.com/vsementsov/qemu into staging
Block jobs & NBD patches
v2: - add arguments to QEMUMachine constructor in test, to make it work
on arm in gitlab pipeline
- use bdrv_inc_in_flight() / bdrv_dec_in_flight() instead of direct
manipulation with bs->in_flight
- add new options for copy-before-write filter
- new trace points for NBD
- prefer unsigned type for some 'in_flight' fields
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEEi5wmzbL9FHyIDoahVh8kwfGfefsFAmK8BqkACgkQVh8kwfGf
# efuiMw/+P9FFLfGFSjVP+LYeT0Ah6kN1ypCMQzIk3Qq/J6qgMZhtRqpQoZOfIFQL
# U9fGmEtQZ7gvEMD/nJToL6uOYlnQfPxDcA6GrRwWWE3rcFiPK4J0q2LlnPLn4QaU
# W/qag5l/QnZfLlj/iV6neWOEvqdnvY1L8IS+T8xV6N0iBYlwgMC/6FGshQwehzcV
# T5F1qPGB0vjFDjf92LFPEsvsFFHjHIVPwOyJMvF64QtSk57utikq/la9PI/yA9AH
# Ll4mNQuZKx6rSI5wE6b21jc8iOUvaoHdPSEDQZfNILSdgGdiKvFwE51y+baGnIAD
# TpjxfG59q0jyGxMjQVxMRSFaxAC4+Mqi82diSPv4xbiUdsE4byJH0oENn4z7+wAv
# EvjuU9yx4FfHHltoUNwfn2pv00o/ELdZIoBNmW36rPxSGZMvfVfRtuBL7XWNUFbW
# Fr4BwsjC4KfIxb16QTBGhXVv6grxdlwoU9N23npdi0YpW1ftZzXGDa85+gINQ807
# eK/gP/OtYPwIql0bgmLiuaRNzC9psmQOO6vQbdvd/e4BEVWkxiez37+e+zFMStmL
# OAL8rS6jckUoxVZjCYFEWg97XOobLUIhQxt9Fwh2omMDGKTwv861ghUAivxSWs93
# IRNxfwqNPxnpDDXjnK1ayZgU08IL98AUYVKcPN1y8JvEhB4Hr1k=
# =ndKk
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 29 Jun 2022 01:30:41 PM +0530
# gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB
# gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>" [unknown]
# gpg: aka "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB
* tag 'pull-block-2022-06-14-v2' of https://gitlab.com/vsementsov/qemu:
block: use 'unsigned' for in_flight field on driver state
nbd: trace long NBD operations
iotests: copy-before-write: add cases for cbw-timeout option
block/copy-before-write: implement cbw-timeout option
block/block-copy: block_copy(): add timeout_ns parameter
util: add qemu-co-timeout
iotests: add copy-before-write: on-cbw-error tests
block/copy-before-write: add on-cbw-error open parameter
block/copy-before-write: refactor option parsing
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Denis V. Lunev [Mon, 30 May 2022 10:39:57 +0000 (12:39 +0200)]
block: use 'unsigned' for in_flight field on driver state
This patch makes in_flight field 'unsigned' for BDRVNBDState and
MirrorBlockJob. This matches the definition of this field on BDS
and is generically correct - we should never get negative value here.
Signed-off-by: Denis V. Lunev <den@openvz.org> CC: John Snow <jsnow@redhat.com> CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> CC: Kevin Wolf <kwolf@redhat.com> CC: Hanna Reitz <hreitz@redhat.com> CC: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Denis V. Lunev [Mon, 30 May 2022 10:39:29 +0000 (12:39 +0200)]
nbd: trace long NBD operations
At the moment there are 2 sources of lengthy operations if configured:
* open connection, which could retry inside and
* reconnect of already opened connection
These operations could be quite lengthy and cumbersome to catch thus
it would be quite natural to add trace points for them.
This patch is based on the original downstream work made by Vladimir.
Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Eric Blake <eblake@redhat.com> CC: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> CC: Kevin Wolf <kwolf@redhat.com> CC: Hanna Reitz <hreitz@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
iotests: copy-before-write: add cases for cbw-timeout option
Add two simple test-cases: timeout failure with
break-snapshot-on-cbw-error behavior and similar with
break-guest-write-on-cbw-error behavior.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
In some scenarios, when copy-before-write operations lasts too long
time, it's better to cancel it.
Most useful would be to use the new option together with
on-cbw-error=break-snapshot: this way if cbw operation takes too long
time we'll just cancel backup process but do not disturb the guest too
much.
Note the tricky point of realization: we keep additional point in
bs->in_flight during block_copy operation even if it's timed-out.
Background "cancelled" block_copy operations will finish at some point
and will want to access state. We should care to not free the state in
.bdrv_close() earlier.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com>
[vsementsov: use bdrv_inc_in_flight()/bdrv_dec_in_flight() instead of
direct manipulation on bs->in_flight] Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Add possibility to limit block_copy() call in time. To be used in the
next commit.
As timed-out block_copy() call will continue in background anyway (we
can't immediately cancel IO operation), it's important also give user a
possibility to pass a callback, to do some additional actions on
block-copy call finish.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Add new API, to make a time limited call of the coroutine.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Add tests for new option of copy-before-write filter: on-cbw-error.
Note that we use QEMUMachine instead of VM class, because in further
commit we'll want to use throttling which doesn't work with -accel
qtest used by VM.
We also touch pylintrc to not break iotest 297.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com>
[vsementsov: add arguments to QEMUMachine constructor] Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Bernhard Beschow [Sun, 26 Jun 2022 09:46:56 +0000 (11:46 +0200)]
hw/i386/xen/xen-hvm: Inline xen_piix_pci_write_config_client() and remove it
xen_piix_pci_write_config_client() is implemented in the xen sub tree and
uses PIIX constants internally, thus creating a direct dependency on
PIIX. Now that xen_set_pci_link_route() is stubbable, the logic of
xen_piix_pci_write_config_client() can be moved to PIIX which resolves
the dependency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20220626094656.15673-3-shentey@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Bernhard Beschow [Sun, 26 Jun 2022 09:46:55 +0000 (11:46 +0200)]
hw/i386/xen/xen-hvm: Allow for stubbing xen_set_pci_link_route()
The only user of xen_set_pci_link_route() is
xen_piix_pci_write_config_client() which implements PIIX-specific logic in
the xen namespace. This makes xen-hvm depend on PIIX which could be
avoided if xen_piix_pci_write_config_client() was implemented in PIIX. In
order to do this, xen_set_pci_link_route() needs to be stubbable which
this patch addresses.
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20220626094656.15673-2-shentey@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Thomas Huth [Wed, 22 Jun 2022 14:03:28 +0000 (16:03 +0200)]
common-user: Only compile the common user code if have_user is set
There is no need to waste cycles here if we only compile the system
binaries or tools. Additionally, this change is even a hard requirement
for building the tools on systems that do not have an entry in the
common-user/host/ folder (since common-user/meson.build is trying
to add such a path via the include_directories() command).
Reported-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Message-Id: <20220622140328.383961-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-3-dgilbert@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Inspired by Julia Lawall's fixing of Linux
kernel comments, I looked at qemu, although I did it manually.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220614104045.85728-2-dgilbert@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
block/copy-before-write: add on-cbw-error open parameter
Currently, behavior on copy-before-write operation failure is simple:
report error to the guest.
Let's implement alternative behavior: break the whole copy-before-write
process (and corresponding backup job or NBD client) but keep guest
working. It's needed if we consider guest stability as more important.
The realisation is simple: on copy-before-write failure we set
s->snapshot_ret and continue guest operations. s->snapshot_ret being
set will lead to all further snapshot API requests. Note that all
in-flight snapshot-API requests may still success: we do wait for them
on BREAK_SNAPSHOT-failure path in cbw_do_copy_before_write().
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
We are going to add one more option of enum type. Let's refactor option
parsing so that we can simply work with BlockdevOptionsCbw object.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@openvz.org> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Merge tag 'pull-semi-20220628' of https://gitlab.com/rth7680/qemu into staging
Semihosting syscall reorg:
* Split out semihosting/syscalls.c with common implementations.
* Reorg arm-compat-semi.c to use syscalls.c.
* Minor prep cleanups to m68k, mips, nios2.
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmK6iSodHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8SEwgAmmowW2oeFA9uCrwz
# gUJo17AJ+RmRF/zXHyu5CPswylvfwH0zJXAm5BV7P/pVdyaL36b8YcgSEf+EWLsf
# rLFHxCshTYEnZSk6yFtWk5bn5azfevHm9/ObPeS9XGL4seQqGy7C/FReoTQ7/zI0
# W3zUDd3bWah3fXw8XYgSzh/RCrC5E2gFFc1G1g+6SIVZ7pbgkre2rRk5WMmylCLd
# jf9pmyswrheaKumCoBxU/S4XDgxVpaf3khiIqdbo8A20MDGnK/SZUWsBwJLK3QB8
# SKKv8o1ovbnl/HykABaszCIkO/LIu6SX3LoK7pF2CujkgSuwEN3WW0DOml6+b3fU
# J7YeZg==
# =sTbM
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 28 Jun 2022 10:22:58 AM +0530
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [ultimate]
* tag 'pull-semi-20220628' of https://gitlab.com/rth7680/qemu: (60 commits)
target/nios2: Move nios2-semi.c to nios2_softmmu_ss
target/nios2: Eliminate nios2_semi_is_lseek
target/mips: Drop pread and pwrite syscalls from semihosting
target/mips: Add UHI errno values
target/mips: Use an exception for semihosting
target/m68k: Make semihosting system only
target/m68k: Eliminate m68k_semi_is_fseek
semihosting: Create semihost_sys_poll_one
semihosting: Remove qemu_semihosting_console_outs
semihosting: Use console_out_gf for SYS_WRITE0
semihosting: Remove qemu_semihosting_console_outc
semihosting: Use console_out_gf for SYS_WRITEC
semihosting: Use console_in_gf for SYS_READC
semihosting: Create qemu_semihosting_guestfd_init
semihosting: Add GuestFDConsole
semihosting: Create qemu_semihosting_console_write
semihosting: Cleanup chardev init
semihosting: Expand qemu_semihosting_console_inc to read
semihosting: Pass CPUState to qemu_semihosting_console_inc
semihosting: Fix docs comment for qemu_semihosting_console_inc
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/nios2: Move nios2-semi.c to nios2_softmmu_ss
Semihosting is not enabled for nios2-linux-user.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reorg nios2_semi_return_* to gdb_syscall_complete_cb.
Use the 32-bit version normally, and the 64-bit version
for HOSTED_LSEEK.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
target/mips: Drop pread and pwrite syscalls from semihosting
We don't implement it with _WIN32 hosts, and the syscalls
are missing from the gdb remote file i/o interface.
Since we can't implement them universally, drop them.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While we had a call to do_m68k_semihosting in linux-user, it
wasn't actually reachable. We don't include DISAS_INSN(halt)
as an instruction unless system mode.
Reviewed-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This will be used for implementing the xtensa select_one
system call. Choose "poll" over "select" so that we can
reuse Glib's g_poll constants and to avoid struct timeval.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Luc Michel <lmichel@kalray.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For arm-compat, initialize console_{in,out}_gf;
otherwise, initialize stdio file descriptors.
This will go some way to cleaning up arm-compat, and
will allow other semihosting to use normal stdio.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a GuestFDType for connecting to the semihosting console.
Hook up to read, write, isatty, and fstat syscalls.
Note that the arm-specific syscall flen cannot be applied
to the console, because the console is not a descriptor
exposed to the guest.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
semihosting: Pass CPUState to qemu_semihosting_console_inc
We don't need CPUArchState, and we do want the CPUState of the
thread performing the operation -- use this instead of current_cpu.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Change 'ret' to uint64_t. This resolves a FIXME in the
m68k and nios2 semihosting that we've lost data.
Change 'err' to int. There is nothing target-specific
about the width of the errno value.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ARM-specific SYS_FLEN isn't really something that can be
reused by other semihosting apis, but there are parts that can
reused for the implementation of semihost_sys_fstat.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_SEEK to a
reusable function. This handles all GuestFD. Isolate the
curious ARM-specific return value processing to a new
callback, common_semi_seek_cb.
Expand the internal type of the offset to int64_t, and
provide the whence argument, which will be required by
m68k and nios2 semihosting.
Note that gdb_do_syscall %x reads target_ulong, not int.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
semihosting: Bound length for semihost_sys_{read,write}
Fixes a minor bug in which a 64-bit guest on a 32-bit host could
truncate the length. This would only ever cause a problem if
there were no bits set in the low 32, so that it truncates to 0.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_WRITE to a
reusable function. This handles all GuestFD. This removes
the last use of common_semi_syscall_len.
Note that gdb_do_syscall %x reads target_ulong, not int.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_READ to a
reusable function. This handles all GuestFD. Isolate the
curious ARM-specific return value processing to a new
callback, common_semi_rw_cb.
Note that gdb_do_syscall %x reads target_ulong, not int.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Split out the non-ARM specific portions of SYS_OPEN to a
reusable function. This handles gdb and host file i/o.
Add helpers to validate the length of the filename string.
Prepare for usage by other semihosting by allowing the
filename length parameter to be 0, and calling strlen.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
semihosting: Move GET_ARG/SET_ARG earlier in the file
Moving this to be useful for another function
besides do_common_semihosting.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the ARM and RISCV specific helpers into
their own header file.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
semihosting: Split common_semi_flen_buf per target
We already have some larger ifdef blocks for ARM and RISCV;
split out common_semi_stack_bottom per target.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
semihosting: Split is_64bit_semihosting per target
We already have some larger ifdef blocks for ARM and RISCV;
split the function into multiple implementations per arch.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
gdbstub: Convert GDB error numbers to host error numbers
Provide the callback with consistent state -- always use
host error numbers. The individual callback can then
decide if the errno requires conversion for the guest.
Reviewed-by: Luc Michel <lmichel@kalray.eu> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Define constants for the errno values defined by the
gdb remote fileio protocol.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
include/exec: Move gdb_stat and gdb_timeval to gdbstub.h
We have two copies of these structures, and require them
in semihosting/ going forward.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There were 3 copies of these flags. Place them in the
file with gdb_do_syscall, with which they belong.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
semihosting: Move common-semi.h to include/semihosting/
This header is not private to the top-level semihosting directory,
so place it in the public include directory.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
semihosting: Return void from do_common_semihosting
Perform the cleanup in the FIXME comment in common_semi_gdb_syscall.
Do not modify guest registers until the syscall is complete,
which in the gdbstub case is asynchronous.
In the synchronous non-gdbstub case, use common_semi_set_ret
to set the result. Merge set_swi_errno into common_semi_cb.
Rely on the latter for combined return value / errno setting.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
projects / qemu-xen.git / log