Peter Maydell [Thu, 26 Nov 2015 16:27:26 +0000 (16:27 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-11-26' into staging
QMP and QObject patches
# gpg: Signature made Thu 26 Nov 2015 09:07:18 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-monitor-2015-11-26:
qjson: Limit number of tokens in addition to total size
qjson: surprise, allocating 6 QObjects per token is expensive
qjson: store tokens in a GQueue
qjson: Convert to parser to recursive descent
qjson: replace QString in JSONLexer with GString
qjson: Inline token_is_escape() and simplify
qjson: Inline token_is_keyword() and simplify
qjson: Give each of the six structural chars its own token type
qjson: Spell out some silent assumptions
check-qjson: Add test for JSON nesting depth limit
qjson: Don't crash when input exceeds nesting limit
qjson: Apply nesting limit more sanely
monitor: Plug memory leak on QMP error
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 26 Nov 2015 15:56:53 +0000 (15:56 +0000)]
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
Small patches, without the one that introduces -fwrapv.
# gpg: Signature made Thu 26 Nov 2015 15:48:53 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream:
target-i386: kvm: Print warning when clearing mcg_cap bits
target-i386: kvm: Use env->mcg_cap when setting up MCE
target-i386: kvm: Abort if MCE bank count is not supported by host
virtio-scsi: don't crash without a valid device
target-sparc: fix 32-bit truncation in fpackfix
exec: remove warning about mempath and hugetlbfs
Revert "exec: silence hugetlbfs warning under qtest"
call bdrv_drain_all() even if the vm is stopped
MAINTAINERS: Update TCG CPU cores section
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eduardo Habkost [Wed, 25 Nov 2015 17:19:16 +0000 (18:19 +0100)]
target-i386: kvm: Print warning when clearing mcg_cap bits
Instead of silently clearing mcg_cap bits when the host doesn't
support them, print a warning when doing that.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[Avoid \n at end of error_report. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448471956-66873-10-git-send-email-pbonzini@redhat.com>
Eduardo Habkost [Wed, 25 Nov 2015 17:19:15 +0000 (18:19 +0100)]
target-i386: kvm: Use env->mcg_cap when setting up MCE
When setting up MCE, instead of using the MCE_*_DEF macros
directly, just filter the existing env->mcg_cap value.
As env->mcg_cap is already initialized as
MCE_CAP_DEF|MCE_BANKS_DEF at target-i386/cpu.c:mce_init(), this
doesn't change any behavior. But it will allow us to change
mce_init() in the future, to implement different defaults
depending on CPU model, machine-type or command-line parameters.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448471956-66873-9-git-send-email-pbonzini@redhat.com>
Eduardo Habkost [Wed, 25 Nov 2015 17:19:14 +0000 (18:19 +0100)]
target-i386: kvm: Abort if MCE bank count is not supported by host
Instead of silently changing the number of banks in mcg_cap based
on kvm_get_mce_cap_supported(), abort initialization if the host
doesn't support MCE_BANKS_DEF banks.
Note that MCE_BANKS_DEF was always 10 since it was introduced in
QEMU, and Linux always returned 32 at KVM_CAP_MCE since
KVM_CAP_MCE was introduced, so no behavior is being changed and
the error can't be triggered by any Linux version. The point of
the new check is to ensure we won't silently change the bank
count if we change MCE_BANKS_DEF or make the bank count
configurable in the future.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[Avoid Yoda condition and \n at end of error_report. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448471956-66873-8-git-send-email-pbonzini@redhat.com>
Paolo Bonzini [Mon, 2 Nov 2015 14:05:34 +0000 (15:05 +0100)]
target-sparc: fix 32-bit truncation in fpackfix
This is reported by Coverity. The algorithm description at
ftp://ftp.icm.edu.pl/packages/ggi/doc/hw/sparc/Sparc.pdf suggests
that the 32-bit parts of rs2, after the left shift, is treated
as a 64-bit integer. Bits 32 and above are used to do the
saturating truncation.
Message-Id: <1446473134-4330-1-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The gethugepagesize() method in exec.c printed a warning if
the file path for "-mem-path" or "-object memory-backend-file"
was not on a hugetlbfs filesystem. This warning is bogus, because
QEMU functions perfectly well with the path on a regular tmpfs
filesystem. Use of hugetlbfs vs tmpfs is a choice for the management
application or end user to make as best fits their needs. As such it
is inappropriate for QEMU to have an opinion on whether the user's
choice is right or wrong in this case.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1448448749-1332-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
That commit changed QEMU initialization order from
- object-initial, chardev, qtest, object-late
to
- chardev, qtest, object-initial, object-late
This breaks chardev setups which need to rely on objects
having been created. For example, when chardevs use TLS
encryption in the future, they need to have tls credential
objects created first.
vl: Create (most) objects before creating chardev backends
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1448448749-1332-2-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wen Congyang [Fri, 20 Nov 2015 09:34:38 +0000 (17:34 +0800)]
call bdrv_drain_all() even if the vm is stopped
There are still I/O operations when the vm is stopped. For example,
stop the vm, and do block migration. In this case, we don't drain all
I/O operation, and may meet the following problem:
Peter Maydell [Thu, 26 Nov 2015 10:24:18 +0000 (10:24 +0000)]
Merge remote-tracking branch 'remotes/mdroth/tags/qga-pull-2015-11-25-v2-tag' into staging
qemu-ga patch queue for 2.5
* include additional w32 MSI install components needed for
guest-exec
* fix 'make install' when compiling with --disable-tools
* fix potential data corruption/loss when accessing files
bi-directionally via guest-file-{read,write}
* explicitly document how integer args for guest-file-seek map to
SEEK_SET/SEEK_CUR/etc to avoid platform-specific differences
v2:
* fixed missing SoB
# gpg: Signature made Wed 25 Nov 2015 23:58:45 GMT using RSA key ID F108B584
# gpg: Good signature from "Michael Roth <flukshun@gmail.com>"
# gpg: aka "Michael Roth <mdroth@utexas.edu>"
# gpg: aka "Michael Roth <mdroth@linux.vnet.ibm.com>"
* remotes/mdroth/tags/qga-pull-2015-11-25-v2-tag:
qga: added another non-interactive gspawn() helper file.
qga: Better mapping of SEEK_* in guest-file-seek
tests: add file-write-read test
qga: flush explicitly when needed
qga: gspawn() console helper to Windows guest agent msi build
makefile: fix qemu-ga make install for --disable-tools
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qjson: Limit number of tokens in addition to total size
Commit 29c75dd "json-streamer: limit the maximum recursion depth and
maximum token count" attempts to guard against excessive heap usage by
limiting total token size (it says "token count", but that's a lie).
Total token size is a rather imprecise predictor of heap usage: many
small tokens use more space than few large tokens with the same input
size, because there's a constant per-token overhead: 37 bytes on my
system.
Tighten this up: limit the token count to 2Mi. Chosen to roughly
match the 64MiB total token size limit.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1448486613-17634-13-git-send-email-armbru@redhat.com>
Paolo Bonzini [Wed, 25 Nov 2015 21:23:32 +0000 (22:23 +0100)]
qjson: surprise, allocating 6 QObjects per token is expensive
Replace the contents of the tokens GQueue with a simple struct. This cuts
the amount of memory allocated by tests/check-qjson from ~500MB to ~20MB,
and the execution time from 600ms to 80ms on my laptop. Still a lot (some
could be saved by using an intrusive list, such as QSIMPLEQ, instead of
the GQueue), but the savings are already massive and the right thing to
do would probably be to get rid of json-streamer completely.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448300659-23559-5-git-send-email-pbonzini@redhat.com>
[Straightforwardly rebased on my patches] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Paolo Bonzini [Wed, 25 Nov 2015 21:23:31 +0000 (22:23 +0100)]
qjson: store tokens in a GQueue
Even though we still have the "streamer" concept, the tokens can now
be deleted as they are read. While doing so convert from QList to
GQueue, since the next step will make tokens not a QObject and we
will have to do the conversion anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448300659-23559-4-git-send-email-pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
We backtrack in parse_value(), even though JSON is LL(1) and thus can
be parsed by straightforward recursive descent. Do exactly that.
Based on an almost-correct patch from Paolo Bonzini.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448486613-17634-10-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Paolo Bonzini [Wed, 25 Nov 2015 21:23:29 +0000 (22:23 +0100)]
qjson: replace QString in JSONLexer with GString
JSONLexer only needs a simple resizable buffer. json-streamer.c
can allocate memory for each token instead of relying on reference
counting of QStrings.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1448300659-23559-2-git-send-email-pbonzini@redhat.com>
[Straightforwardly rebased on my patches, checkpatch made happy] Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448486613-17634-8-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448486613-17634-7-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
qjson: Give each of the six structural chars its own token type
Simplifies things, because we always check for a specific one.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448486613-17634-6-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448486613-17634-5-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
check-qjson: Add test for JSON nesting depth limit
This would have prevented the regression mentioned in the previous
commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1448486613-17634-4-git-send-email-armbru@redhat.com>
qjson: Don't crash when input exceeds nesting limit
We limit nesting depth and input size to defend against input
triggering excessive heap or stack memory use (commit 29c75dd
json-streamer: limit the maximum recursion depth and maximum token
count). However, when the nesting limit is exceeded,
parser_context_peek_token()'s assertion fails.
Broken in commit 65c0f1e "json-parser: don't replicate tokens at each
level of recursion".
To reproduce stuff 1025 open braces or brackets into QMP.
Fix by taking the error exit instead of the normal one.
Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1448486613-17634-3-git-send-email-armbru@redhat.com>
The nesting limit from commit 29c75dd "json-streamer: limit the
maximum recursion depth and maximum token count" applies separately to
braces and brackets. This makes no sense. Apply it to their sum,
because that's actually a measure of recursion depth.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1448486613-17634-2-git-send-email-armbru@redhat.com>
Gerd Hoffmann [Wed, 25 Nov 2015 07:04:05 +0000 (08:04 +0100)]
vnc: fix segfault
Commit "c7628bf vnc: only alloc server surface with clients connected"
missed one rarely used codepath (cirrus with guest drivers using 2d
accel) where we have to check for the server surface being present,
to avoid qemu crashing with a NULL pointer dereference. Add the check.
Reported-by: Anthony PERARD <anthony.perard@citrix.com> Tested-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
qga: added another non-interactive gspawn() helper file.
With previous commit we added gspawn-win64-helper-console.exe,
required for gspawn() mingw implementation.
Unfortunatly when running as a service without interactive
desktop, gspawn() also requires another helper app.
Added gspawn-win64-helper.exe and gspawn-win32-helper.exe
for corresponding architectures.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* remove trailing whitespace Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Eric Blake [Wed, 25 Nov 2015 17:37:15 +0000 (10:37 -0700)]
qga: Better mapping of SEEK_* in guest-file-seek
Exposing OS-specific SEEK_ constants in our qapi was a mistake
(if the host has SEEK_CUR as 1, but the guest has it as 2, then
the semantics are unclear what should happen); if we had a time
machine, we would instead expose only a symbolic enum. It's too
late to change the fact that we have an integer in qapi, but we
can at least document what mapping we want to enforce for all
qga clients (and luckily, it happens to be the mapping that both
Linux and Windows use); then fix the code to match that mapping.
It also helps us filter out unsupported SEEK_DATA and SEEK_HOLE.
In the future, we may wish to move our QGA_SEEK_* constants into
qga/qapi-schema.json, along with updating the schema to take an
alternate type (either the integer, or the string value of the
enum name) - but that's too much risk during hard freeze.
Signed-off-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
This test exhibits a POSIX behaviour regarding switching between write
and read. It's undefined result if the application doesn't ensure a
flush between the two operations (with glibc, the flush can be implicit
when the buffer size is relatively small). The previous commit fixes
this test.
Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1210246
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
According to the specification:
http://pubs.opengroup.org/onlinepubs/9699919799/functions/fopen.html
"the application shall ensure that output is not directly followed by
input without an intervening call to fflush() or to a file positioning
function (fseek(), fsetpos(), or rewind()), and input is not directly
followed by output without an intervening call to a file positioning
function, unless the input operation encounters end-of-file."
Without this change, an fwrite() followed by an fread() may lose the
previously written content, as shown in the following test.
qga: gspawn() console helper to Windows guest agent msi build
This helper, gspawn-win64-helper-console.exe for 64-bit and
gspawn-win32-helper-console.exe for 32-bit environment,
is needed for gspawn() mingw implementation, used by guest-exec command.
Without these files guest-exec command on Windows will not
work with "file not found" diagnostic message.
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Michael Roth [Mon, 23 Nov 2015 21:48:58 +0000 (15:48 -0600)]
makefile: fix qemu-ga make install for --disable-tools
ab59e3e introduced a fix for `make install` on w32 that involved
filtering out qemu-ga from $TOOLS install recipe so that we could
append $(EXESUF) to it before attempting to install the binary
via install-prog function.
install-prog takes a list of binaries to install to a particular
directory. If the list is empty it breaks. We guard against this
by ensuring $TOOLS is not empty prior to calling.
However, ab59e3e introduces extra filtering after this check which
can still result on us attempting to call install-prog with an
empty list of binaries. In particular, this occurs if we
build with the --disable-tools configure option, which results
in qemu-ga being the only member of $TOOLS.
Fix this by doing a simple s/qemu-ga/qemu-ga$(EXESUF)/ pass through
$TOOLS instead of filtering out qemu-ga to handle it seperately.
Reported-by: Steve Ellcey <sellcey@imgtec.com> Cc: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
# gpg: Signature made Wed 25 Nov 2015 14:28:47 GMT using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20151125:
block-migration: limit the memory usage
Assume madvise for (no)hugepage works
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 25 Nov 2015 14:47:06 +0000 (14:47 +0000)]
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Wed 25 Nov 2015 13:33:14 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream:
qemu-iotests: Add -nographic when starting QEMU in 119 and 120
block/qapi: Plug memory leak on query-block error path
raw-posix.c: Make GetBSDPath() handle caching options
nand: fix flash erase when oob is in memory
test-aio: Fix event notifier cleanup
tests/Makefile: Add more dependencies for test-timed-average
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wen Congyang [Fri, 20 Nov 2015 09:37:13 +0000 (17:37 +0800)]
block-migration: limit the memory usage
If we set migration speed in a very large value, block-migration will try to read
all data to the memory. Because
(block_mig_state.submitted + block_mig_state.read_done) * BLOCK_SIZE
will be overflow, and it will be always less than rate limit.
There is no need to read too many data into memory when the rate limit is very large.
So limit the memory usage can fix the overflow problem.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
madvise() returns EINVAL in the case of many failures, but also
returns it in cases where the host kernel doesn't have THP enabled.
Postcopy only really cares that THP is off before it detects faults,
and turns it back on afterwards; so we're going to have
to assume that if the madvise fails then the host just doesn't do
THP and we can carry on with the postcopy.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
block/qapi: Plug memory leak on query-block error path
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Programmingkid [Sat, 21 Nov 2015 00:17:48 +0000 (19:17 -0500)]
raw-posix.c: Make GetBSDPath() handle caching options
Add support for caching options that can be specified from the command
line.
The CD-ROM raw char device bypasses the host page cache and therefore
has alignment requirements. Alignment probing is necessary so only use
the raw char device if BDRV_O_NOCACHE is set.
This patch fixes -cdrom /dev/cdrom on Mac OS X hosts, where bdrv_read()
used to fail due to misaligned requests during image format probing.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Mon, 23 Nov 2015 12:30:23 +0000 (13:30 +0100)]
test-aio: Fix event notifier cleanup
One test case closed an event notifier (event_notifier_cleanup())
without first disabling it (set_event_notifier(..., NULL)). This
resulted in a leftover handle 0 that was added to each subsequent
WaitForMultipleObjects() call, causing the function to fail (invalid
handle).
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Peter Maydell [Wed, 25 Nov 2015 12:09:34 +0000 (12:09 +0000)]
Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20151125' into staging
Xen 2015/11/25
# gpg: Signature made Wed 25 Nov 2015 11:19:26 GMT using RSA key ID 70E1AE90
# gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>"
* remotes/sstabellini/tags/xen-20151125:
xen_disk: Remove ioreq.postsync
xen: fix usage of xc_domain_create in domain builder
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Wed, 25 Nov 2015 11:38:03 +0000 (11:38 +0000)]
Merge remote-tracking branch 'remotes/armbru/tags/pull-ivshmem-2015-11-25' into staging
ivshmem patches for 2.5
# gpg: Signature made Wed 25 Nov 2015 09:25:38 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
* remotes/armbru/tags/pull-ivshmem-2015-11-25:
ivshmem: Rename property memdev to x-memdev for 2.5
ivshmem: Mark questionable socket type test FIXME
tests/ivshmem-test: Supply missing initializer in get_device()
qemu-doc: Fix ivshmem usage example with shm=...
qemu-doc: Fix ivshmem example markup
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ivshmem: Rename property memdev to x-memdev for 2.5
The device's guest interface and its QEMU user interface are
flawed^Whotly debated. We'll resolve that in the next development
cycle, probably by deprecating the device in favour of a cleaned up,
but not quite compatible revision.
To avoid adding more baggage to the soon-to-be-deprecated interface,
mark property "memdev" as experimental, by renaming it to "x-memdev".
It's the only recent user interface change.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1448384789-14830-6-git-send-email-armbru@redhat.com>
[Update of qemu-doc.texi squashed in] Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 93fb43522e3b8dddb6c709d568919347d9a5ba3f.1448367341.git.berto@igalia.com Signed-off-by: John Snow <jsnow@redhat.com>
Alberto Garcia [Tue, 24 Nov 2015 12:17:59 +0000 (14:17 +0200)]
atapi: Account for failed and invalid operations in cd_read_sector()
Commit 5f81724d made PIO read requests async but didn't add the
relevant block_acct_failed() and block_acct_invalid() calls.
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 9b87e09d61019c128139b6c999ed0c07f0674170.1448367341.git.berto@igalia.com Signed-off-by: John Snow <jsnow@redhat.com>
John Snow [Fri, 20 Nov 2015 22:53:55 +0000 (17:53 -0500)]
ide-test: cdrom_pio_impl fixup
Final tidying: move the interrupt wait into the loop,
document that the status read clears the IRQ, and move
the final interrupt check outside of the loop.
This should be functionally equivalent to how it works
currently, but a little less ambiguous and slightly more
explicit about the state transitions.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1448060035-31973-3-git-send-email-jsnow@redhat.com
Peter Maydell [Tue, 24 Nov 2015 14:12:15 +0000 (14:12 +0000)]
target-arm/translate-a64.c: Correct unallocated checks for ldst_excl
The checks for the unallocated encodings in the ldst_excl group
(exclusives and load-acquire/store-release) were not correct. This
error meant that in turn we ended up with code attempting to handle
the non-existent case of "non-exclusive load-acquire/store-release
pair". Delete that broken and now unreachable code.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
Peter Maydell [Tue, 24 Nov 2015 14:12:15 +0000 (14:12 +0000)]
target-arm: Don't mask out bits [47:40] in LPAE descriptors for v8
In an LPAE format descriptor in ARMv8 the address field extends
up to bit 47, not just bit 39. Correct the masking so we don't
give incorrect results if the output address size is greater
than 40 bits, as it can be for AArch64.
(Note that we don't yet support the new-in-v8 Address Size fault which
should be generated if any translation table entry or TTBR contains
an address with non-zero bits above the most significant bit of the
maximum output address size.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1448029971-9875-1-git-send-email-peter.maydell@linaro.org
The uses of the CONFIG_GDBSTUB_XML define were removed in commit b77abd95a9484c, but the define in aarch64-linux-user.mak somehow
escaped the cull (the patchset probably crossed in the mail with
the patches adding aarch64 support). Remove the stray define.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1447690178-4560-1-git-send-email-peter.maydell@linaro.org
Alistair Francis [Tue, 24 Nov 2015 14:12:15 +0000 (14:12 +0000)]
xlnx-ep108: Fix minimum RAM check
The minimum RAM check logic for the Xiilnx EP108 was off by one,
which caused a false positive. Correct the logic to only print
warnings when the RAM is below 0x8000000.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Message-id: fba8112ca7b01efd72553332b8045ecf107b7662.1448021100.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Leon Alrae [Thu, 19 Nov 2015 19:15:35 +0000 (19:15 +0000)]
target-mips: flush QEMU TLB when disabling 64-bit addressing
CP0.Status.KX/SX/UX bits are responsible for enabling access to 64-bit
Kernel/Supervisor/User Segments. If bit is cleared an access to
corresponding segment should generate Address Error Exception.
However, the guest may still be able to access some pages belonging to
the disabled 64-bit segment because we forget to flush QEMU TLB.
James Hogan [Tue, 17 Nov 2015 17:13:54 +0000 (17:13 +0000)]
target-mips: Fix exceptions while UX=0
Commit 01f728857941 ("target-mips: Status.UX/SX/KX enable 32-bit address
wrapping") added a new hflag MIPS_HFLAG_AWRAP, which indicates that
64-bit addressing is disallowed in the current mode, so hflag users
don't need to worry about the complexities of working that out, for
example checking both MIPS_HFLAG_KSU and MIPS_HFLAG_UX.
However when exceptions are taken outside of exception level,
mips_cpu_do_interrupt() manipulates the env->hflags directly rather than
using compute_hflags() to update them, and this code wasn't updated
accordingly. As a result, when UX is cleared, MIPS_HFLAG_AWRAP is set,
but it doesn't get cleared on entry back into kernel mode due to an
exception. Kernel mode then cannot access the 64-bit segments resulting
in a nested exception loop. The same applies to errors and debug
exceptions.
Fix by updating mips_cpu_do_interrupt() to clear the MIPS_HFLAG_WRAP
flag when necessary, according to compute_hflags().
Fixes: 01f728857941 ("target-mips: Status.UX/SX/KX enable 32-bit...") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Peter Maydell [Tue, 24 Nov 2015 10:27:19 +0000 (10:27 +0000)]
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
# gpg: Signature made Tue 24 Nov 2015 08:04:07 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
virtio-blk: Move resetting of req->mr_next to virtio_blk_handle_rw_error
parallels: dirty BAT properly for continuous allocations
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
parallels: dirty BAT properly for continuous allocations
This patch marks part of the BAT dirty properly. There is a possibility that
multy-block allocation could have one block allocated on one BAT page and
next block on the next page. The code without the patch could not save
updated position to the file.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 1447779778-26062-1-git-send-email-den@openvz.org CC: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Pavel Fedin [Tue, 27 Oct 2015 12:51:31 +0000 (15:51 +0300)]
hostmem: Ignore ENOSYS while setting MPOL_DEFAULT
Currently hostmem backend fails if CONFIG_NUMA is enabled in QEMU
(the default) but NUMA is not supported by the kernel. This makes
it impossible to use ivshmem in such configurations.
This patch fixes the problem by ignoring ENOSYS error if policy is set to
MPOL_DEFAULT. This way the code behaves in the same way as if CONFIG_NUMA
was not defined. qemu will still fail if the user specifies some other
policy, so that the user knows it.
John Clarke [Thu, 19 Nov 2015 09:30:50 +0000 (10:30 +0100)]
tcg: Fix highwater check
A simple typo in the variable to use when comparing vs the highwater mark.
Reports are that qemu can in fact segfault occasionally due to this mistake.
Signed-off-by: John Clarke <johnc@kirriwa.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
Peter Lieven [Fri, 20 Nov 2015 14:29:02 +0000 (15:29 +0100)]
tests: fix cdrom_pio_impl in ide-test
The check for the cleared BSY flag has to be performed
before each data transfer and not just before the
first one.
Commit 5f81724d revealed this glitch as the BSY flag
was not set in ATAPI PIO transfers before.
While at it fix the descriptions and add a comment before
the nested for loop that transfers the data.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-id: 1448029742-19771-1-git-send-email-pl@kamp.de Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 19 Nov 2015 17:54:46 +0000 (17:54 +0000)]
Merge remote-tracking branch 'remotes/afaerber/tags/qom-devices-for-peter' into staging
QOM infrastructure fixes and device conversions
* Fix for properties on objects > 4 GiB
* Performance improvements for QOM property handling
* Assertion cleanups
* MAINTAINERS additions
# gpg: Signature made Thu 19 Nov 2015 14:32:16 GMT using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
* remotes/afaerber/tags/qom-devices-for-peter:
MAINTAINERS: Add check-qom-{interface,proplist} to QOM
qom: Clean up assertions to display values on failure
qom: Replace object property list with GHashTable
qom: Add a test case for complex property finalization
net: Convert net filter code to use object property iterators
ppc: Convert spapr code to use object property iterators
vl: Convert machine help code to use object property iterators
qmp: Convert QMP code to use object property iterators
qom: Introduce ObjectPropertyIterator struct for iteration
qdev: Change Property::offset field to ptrdiff_t type
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 19 Nov 2015 16:26:08 +0000 (16:26 +0000)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
vhost, pc: fixes for 2.5
Fixes all over the place.
This also re-enables a test we disabled in 2.5 cycle
now that there's a way not to get a warning from it.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Thu 19 Nov 2015 13:27:43 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
exec: silence hugetlbfs warning under qtest
tests: re-enable vhost-user-test
acpi: fix buffer overrun on migration
vhost-user: fix log size
vhost-user: ignore qemu-only features
specs/vhost-user: fix spec to match reality
tests/vhost-user-bridge: implement logging of dirty pages
i440fx: print an error message if user tries to enable iommu
q35: Check propery to determine if iommu is set
vhost-user: start/stop all rings
vhost-user: print original request on error
vhost-user-test: support VHOST_USER_SET_VRING_ENABLE
vhost-user: update spec description
vhost: don't send RESET_OWNER at stop
vhost: let SET_VRING_ENABLE message depends on protocol feature
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 19 Nov 2015 15:56:50 +0000 (15:56 +0000)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20151119' into staging
target-arm queue:
* add missing condexec updates when emulating architectural breakpoints
and coprocessor access checks in Thumb translation (could in theory
cause problems when these happened inside a Thumb IT block and an
exception was taken)
* arm_gic: correctly restore nested IRQ priority
# gpg: Signature made Thu 19 Nov 2015 13:29:37 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
* remotes/pmaydell/tags/pull-target-arm-20151119:
target-arm: Update condexec before arch BP check in AA32 translation
target-arm: Update condexec before CP access check in AA32 translation
hw/arm_gic: Correctly restore nested irq priority
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# gpg: Signature made Thu 19 Nov 2015 11:17:07 GMT using RSA key ID 5872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
* remotes/juanquintela/tags/migration/20151119:
migration: normalize locking in migration/savevm.c
migration: implement bdrv_all_find_vmstate_bs helper
migration: reorder processing in hmp_savevm
snapshot: create bdrv_all_create_snapshot helper
migration: drop find_vmstate_bs check in hmp_delvm
snapshot: create bdrv_all_find_snapshot helper
migration: factor our snapshottability check in load_vmstate
snapshot: create bdrv_all_goto_snapshot helper
snapshot: create bdrv_all_delete_snapshot helper
snapshot: return error code from bdrv_snapshot_delete_by_id_or_name
snapshot: create helper to test that block drivers supports snapshots
Unneeded NULL check
migration: Dead assignment of current_time
Set last_sent_block
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Andreas Färber [Wed, 18 Nov 2015 18:03:29 +0000 (19:03 +0100)]
MAINTAINERS: Add check-qom-{interface,proplist} to QOM
Add the QOM unit tests to the QOM maintenance area so that maintainers
get CC'ed on changes and to document QOM test coverage.
Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
Pavel Fedin [Tue, 13 Oct 2015 12:37:45 +0000 (13:37 +0100)]
qom: Replace object property list with GHashTable
ARM GICv3 systems with large number of CPUs create lots of IRQ pins. Since
every pin is represented as a property, number of these properties becomes
very large. Every property add first makes sure there's no duplicates.
Traversing the list becomes very slow, therefore QEMU initialization takes
significant time (several seconds for e. g. 16 CPUs).
This patch replaces list with GHashTable, making lookup very fast. The only
drawback is that object_child_foreach() and object_child_foreach_recursive()
cannot add or remove properties during traversal, since GHashTableIter does
not have modify-safe version. However, the code seems not to modify objects
via these functions.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Tested-by: Pavel Fedin <p.fedin@samsung.com>
[AF: Fixed object_property_del_{all,child}() issues;
g_hash_table_contains() -> g_hash_table_lookup(), suggested by Daniel] Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
vhost-user-test prints a warning. A test should not need to run on
hugetlbfs, let's silence the warning under qtest. The
condition can't check on qtest_enabled() since vhost-user-test actually
doesn't use qtest accel. However, qtest_driver() can be used, if
qtest_init() is called early enough. For that reason, move chardev and
qtest initialization early.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 7fe34ca9c2e actually disabled vhost-user-test altogether,
since CONFIG_VHOST_NET is a per-target config variable.
tests/vhost-user-test is already x86/x64 softmmu specific test, in order
to enable it correctly, kvm & vhost-net are also conditions. To check
that, set CONFIG_VHOST_NET_TEST_$target when kvm is also enabled.
Since "check-qtest-x86_64-y = $(check-qtest-i386-y)", avoid duplication
when both x86 & x64 are enabled.
Other targets than x86 aren't enabled yet, and is intentionally left as
a future improvement, since I can't easily test those.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ich calls acpi_gpe_init with length ICH9_PMIO_GPE0_LEN so
ICH9_PMIO_GPE0_LEN/2 bytes are allocated, but then the full
ICH9_PMIO_GPE0_LEN bytes are migrated.
As a quick work-around, allocate twice the memory.
We'll probably want to tweak code to avoid
migrating the extra ICH9_PMIO_GPE0_LEN/2 bytes,
but that is a bit trickier to do without breaking
migration compatibility.
Tested-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Sergey Fedorov [Tue, 17 Nov 2015 13:38:46 +0000 (16:38 +0300)]
target-arm: Update condexec before CP access check in AA32 translation
Coprocessor access instructions are allowed inside IT block.
gen_helper_access_check_cp_reg() can raise an exceptions thus condexec
bits should be updated before.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Message-id: 1447767527-21268-2-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Upon activating an interrupt, set the corresponding priority bit in the
APR/NSAPR registers without touching the currently set bits. In the event
of nested interrupts, the GIC will then have the information it needs to
restore the priority of the pre-empted interrupt once the higher priority
interrupt finishes execution.
Signed-off-by: François Baldassari <francois@pebble.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Denis V. Lunev [Thu, 19 Nov 2015 06:42:11 +0000 (09:42 +0300)]
migration: normalize locking in migration/savevm.c
basically all bdrv_* operations must be called under aio_context_acquire
except ones with bdrv_all prefix.
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
The patch also ensures proper locking for the operation.
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Denis V. Lunev [Thu, 19 Nov 2015 06:42:09 +0000 (09:42 +0300)]
migration: reorder processing in hmp_savevm
State deletion can be performed on running VM which reduces VM downtime
This approach looks a bit more natural.
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Denis V. Lunev [Thu, 19 Nov 2015 06:42:08 +0000 (09:42 +0300)]
snapshot: create bdrv_all_create_snapshot helper
to create snapshot for all loaded block drivers.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Denis V. Lunev [Thu, 19 Nov 2015 06:42:07 +0000 (09:42 +0300)]
migration: drop find_vmstate_bs check in hmp_delvm
There is no much sense to do the check and write warning.
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Denis V. Lunev [Thu, 19 Nov 2015 06:42:06 +0000 (09:42 +0300)]
snapshot: create bdrv_all_find_snapshot helper
to check that snapshot is available for all loaded block drivers.
The check bs != bs1 in hmp_info_snapshots is an optimization. The check
for availability of this snapshot will return always true as the list
of snapshots was collected from that image.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Denis V. Lunev [Thu, 19 Nov 2015 06:42:05 +0000 (09:42 +0300)]
migration: factor our snapshottability check in load_vmstate
We should check that all inserted and not read-only images support
snapshotting. This could be made using already invented helper
bdrv_all_can_snapshot().
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Denis V. Lunev [Thu, 19 Nov 2015 06:42:04 +0000 (09:42 +0300)]
snapshot: create bdrv_all_goto_snapshot helper
to switch to snapshot on all loaded block drivers.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Denis V. Lunev [Thu, 19 Nov 2015 06:42:03 +0000 (09:42 +0300)]
snapshot: create bdrv_all_delete_snapshot helper
to delete snapshots from all loaded block drivers.
The patch also ensures proper locking.
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Denis V. Lunev [Thu, 19 Nov 2015 06:42:02 +0000 (09:42 +0300)]
snapshot: return error code from bdrv_snapshot_delete_by_id_or_name
this will make code better in the next patch
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Denis V. Lunev [Thu, 19 Nov 2015 06:42:01 +0000 (09:42 +0300)]
snapshot: create helper to test that block drivers supports snapshots
The patch enforces proper locking for this operation.
Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Tested-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
The check is unneccesary, we read the value at the start of the
thread, use it, and never change it. The value is checked to be
non-NULL before thread creation.
I set current_time before the postcopy test but never use it;
(I think this was from the original version where it was time based).
Spotted by coverity, CID 1339208
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
projects / qemu-xen.git / log