daemon: dispatch.c should include stdio.h (and stdarg.h)
dispatch.c requires stdio.h (and stdarg.h), however, currently
dispatch.c implicitly relys on rpc/xdr.h to include stdio.h.
If rpc/xdr.h unxpectedly does not include stdio.h, the compilation
of dispatch.c fails.
This can happen, for example, when portablexdr is installed
under /usr/local; because portablexdr's rpc/xdr.h does not
include stdio.h and gcc looks up it not /usr/include/rpc/xdr.h.
Note that stdarg.h is also included according to man va_start,
although stdio.h seems including it anyway.
Jim Meyering [Tue, 13 Jul 2010 20:28:35 +0000 (15:28 -0500)]
uml_driver: correct logic error in umlMonitorCommand
* src/uml/uml_driver.c (umlMonitorCommand): Correct flaw that would
cause unconditional "incomplete reply ..." failure, since "nbytes"
was always 0 or 1.
Jim Meyering [Tue, 13 Jul 2010 20:15:04 +0000 (15:15 -0500)]
qemuConnectMonitor: fix a bug that would have masked SELinux failure
* src/qemu/qemu_driver.c (qemuConnectMonitor): Correct erroneous
parenthesization in two expressions. Without this fix, failure
to set or clear SELinux security context in the monitor would go
undiagnosed. Also correct a diagnostic and split some long lines.
cpu: Fail when CPU type cannot be detected from XML
When autodetecting whether XML describes guest or host CPU, the presence
of <arch> element is checked. If it's present, we treat the XML as host
CPU definition. Which is right, since guest CPU definitions do not
contain <arch> element. However, if at the same time the root <cpu>
element contains `match' attribute, we would silently ignore it and
still treat the XML as host CPU. We should rather refuse such invalid
XML.
When a CPU to be compared with host CPU describes a host CPU instead of
a guest CPU, the result is incorrect. This is because instead of
treating additional features in host CPU description as required, they
were treated as if they were mentioned with all possible policies at the
same time.
qemu: Use -nodefconfig when probing for CPU models
In case qemu supports -nodefconfig, libvirt adds uses it when launching
new guests. Since this option may affect CPU models supported by qemu,
we need to use it when probing for available models.
An indentation mistake meant that a check for return status
was not properly performed in all cases. This could result
in a crash on NULL pointer in a following line.
* src/qemu/qemu_monitor_json.c: Fix check for return status
when processing JSON for blockstats
Ensure we return the callback ID in python events binding
A missing return statement in the python binding meant that
the callers could not get the callback ID, and thus not be
able to unregister event callbacks
By specifying <vendor> element in CPU requirements a guest can be
restricted to run only on CPUs by a given vendor. Host CPU vendor is
also specified in capabilities XML.
The vendor is checked when migrating a guest but it's not forced, i.e.,
guests configured without <vendor> element can be freely migrated.
cpuBaseline: Don't mess with the CPU returned by arch driver
All features in the baseline CPU definition were always created with
policy='require' even though an arch driver returned them with different
policy settings.
Matthias Bolte [Tue, 29 Jun 2010 18:01:45 +0000 (20:01 +0200)]
vbox: Let configure detect/set the XPCOMC directory
This allows the user to give an explicit path to configure
./configure --with-vbox=/path/to/virtualbox
instead of having the VirtualBox driver probe a set of possible
paths at runtime. If no explicit path is specified then configure
probes the set of "known" paths.
Cole Robinson [Wed, 30 Jun 2010 19:57:54 +0000 (15:57 -0400)]
udev: Parse PCI devices even if libpciaccess fails
We only use libpciaccess for resolving device product/vendor. If
initializing the library fails (say if using qemu:///session), don't
warn so loudly, and carry on as usual.
Cole Robinson [Wed, 30 Jun 2010 17:04:57 +0000 (13:04 -0400)]
util: virExec: Dispatch all errors raised after fork
Any error message raised after the process has forked needs
to be followed by virDispatchError, otherwise we have no chance of
ever seeing it. This was selectively done for hook functions in the past,
but really applies to all post-fork errors.
Ryota Ozaki [Wed, 30 Jun 2010 11:49:28 +0000 (20:49 +0900)]
cgroup: Fix compilation broken on MinGW due to dirent->d_type
As pointed out by Eric Blake, using dirent->d_type breaks
compilation on MinGW. This patch addresses this by using
'#if defined' as same as doing for virCgroupForDriver.
Eric Blake [Tue, 29 Jun 2010 22:14:57 +0000 (16:14 -0600)]
virsh: tweak help output for VSH_OT_DATA
https://bugzilla.redhat.com/show_bug.cgi?id=609044 complained
that 'virsh help pool-create-as' didn't document the shortcut
that you can do 'virsh pool-create-as $name $type --target $target'
rather than having to supply the four optional source- arguments
in order to fill out the necessary positional arguments.
This one-liner changes the help output to hopefully make this more obvious:
NAME
pool-create-as - create a pool from a set of args
OPTIONS
[--name] <string> name of the pool
--print-xml print XML document, but don't define/create
[--type] <string> type of the pool
[--source-host] <string> source-host for underlying storage
[--source-path] <string> source path for underlying storage
[--source-dev] <string> source device for underlying storage
[--source-name] <string> source name for underlying storage
[--target] <string> target for underlying storage
--source-format <string> format for underlying storage
* tools/virsh.c (vshCmddefHelp): Make it more obvious that data
arguments may, but not must, be specified by option leaders.
Avoid invoking the qemu monitor destroy callback if the constructor fails
Some, but not all, codepaths in the qemuMonitorOpen() method
would trigger the destroy callback. The caller does not expect
this to be invoked if construction fails, only during normal
release of the monitor. This resulted in a possible double-unref
of the virDomainObjPtr, because the caller explicitly unrefs
the virDomainObjPtr if qemuMonitorOpen() fails
* src/qemu/qemu_monitor.c: Don't invoke destroy callback from
qemuMonitorOpen() failure paths
Ryota Ozaki [Sat, 26 Jun 2010 17:21:28 +0000 (02:21 +0900)]
cgroup: Add missing errno == ENOENT check in virCgroupRemoveRecursively
ENOENT happens normally when a subsystem is enabled with any other
subsystems and the directory of the target group has already removed
in a prior loop. In that case, the function should just return without
leaving an error message.
NB this is the same behavior as before introducing virCgroupRemoveRecursively.
Chris Lalancette [Mon, 14 Jun 2010 21:16:53 +0000 (17:16 -0400)]
Fix crash when detaching devices from qemu domains.
Make sure to *not* call qemuDomainPCIAddressReleaseAddr if
QEMUD_CMD_FLAG_DEVICE is *not* set (for older qemu). This
prevents a crash when trying to do device detachment from
a qemu guest.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Chris Lalancette [Mon, 14 Jun 2010 21:12:35 +0000 (17:12 -0400)]
Check for active PCI devices when doing nodedevice operations.
In the current libvirt PCI code, there is no checking whether
a PCI device is in use by a guest when doing node device
detach or reattach. This causes problems when a device is
assigned to a guest, and the administrator starts issuing
nodedevice commands. Make it so that we check the list
of active devices when trying to detach/reattach, and only
allow the operation if the device is not assigned to a guest.
Signed-off-by: Chris Lalancette <clalance@redhat.com>
Justin Clift [Mon, 28 Jun 2010 16:47:30 +0000 (02:47 +1000)]
virsh: add new --details option to pool-list
This patch adds a new --details option to the virsh pool-list
command, making its output more useful to people who use virsh
for significant lengths of time.
Eric Blake [Mon, 28 Jun 2010 17:33:05 +0000 (11:33 -0600)]
phyp: don't steal storage management from other drivers
Fix regression introduced in commit a4a287242 - basically, the
phyp storage driver should only accept the same URIs that the
main phyp driver is willing to accept. Blindly accepting all
URIs meant that the phyp storage driver was being consulted for
'virsh -c qemu:///session pool-list --all', rather than the
qemu storage driver, then since the URI was not for phyp, attempts
to then use the phyp driver crashed because it was not initialized.
* src/phyp/phyp_driver.c (phypStorageOpen): Only accept connections
already open to a phyp driver.
Laine Stump [Tue, 29 Jun 2010 03:50:15 +0000 (23:50 -0400)]
Avoid calling virStorageFileIsSharedFS with NULL
This code was just recently added (by me) and didn't account for the
fact that stdin_path is sometimes NULL. If it's NULL, and
SetSecurityAllLabel fails, a segfault would result.
Ryota Ozaki [Sun, 27 Jun 2010 13:07:00 +0000 (22:07 +0900)]
lxc: Fix virsh console doesn't work after restarting libvirtd
Because tty path is unexpectedly not saved in the live configuration
file of a domain, libvirtd cannot get the console of the domain back
after restarting.
The reason why the tty path isn't saved is that, to save the tty path,
the save function, virDomainSaveConfig, requires that the target domain
is running (pid != -1), however, lxc driver calls the function before
starting the domain to pass the configuration to controller.
To ensure to save the tty path, the patch lets lxc driver call the save
function again after starting the domain.
Ryota Ozaki [Sat, 26 Jun 2010 20:59:59 +0000 (05:59 +0900)]
lxc: Fix error handlings in lxcContainerRenameAndEnableInterfaces
The function is expected to return negative value on failure,
however, it returns positive value when either setInterfaceName
or vethInterfaceUpOrDown fails. Because the function returns
the return value of either as is, however, the two functions
may return positive value on failure.
The patch fixes the defects and add error messages.
Laine Stump [Fri, 25 Jun 2010 00:59:24 +0000 (20:59 -0400)]
Selectively ignore domainSetSecurityAllLabel failure in domain restore
When the saved domain image is on an NFS share, at least some part of
domainSetSecurityAllLabel will fail (for example, selinux labels can't
be modified). To allow domain restore to still work in this case, just
ignore the errors.
Laine Stump [Fri, 25 Jun 2010 16:18:57 +0000 (12:18 -0400)]
Enhance virStorageFileIsSharedFS
virStorageFileIsSharedFS would previously only work if the entire path
in question was stat'able by the uid of the libvirtd process. This
patch changes it to crawl backwards up the path retrying the statfs
call until it gets to a partial path that *can* be stat'ed.
This is necessary to use the function to learn the fstype for files
stored as a different user (and readable only by that user) on a
root-squashed remote filesystem.
Eric Blake [Fri, 25 Jun 2010 22:27:07 +0000 (16:27 -0600)]
build: fix regression with libvirt-api.xml generation
(EXTRA_DIST): Remove redundant listing of xml files.
(html/%-%.html, html/%-virterror.html, %-api.xml, %-refs.xml):
Rewrite with...
(python_generated_files): ...new macro, since make didn't see
through the dependency chain correctly otherwise.
Don't squash file permissions when migration fails
If an active migration operation fails, or is cancelled by the
admin, the QEMU on the destination is shutdown and the one on
the source continues running. It is important in shutting down
the QEMU on the destination, the security drivers don't reset
the file labelling/permissions.
* src/qemu/qemu_driver.c: Don't reset labelling/permissions
on migration abort
Eric Blake [Thu, 24 Jun 2010 22:25:56 +0000 (16:25 -0600)]
phyp: optimize use of sed
Minor speedups by using the full power of sed.
* src/phyp/phyp_driver.c (phypGetVIOSFreeSCSIAdapter)
(phypDiskType, phypListDefinedDomains): Use fewer processes, by
folding other work into sed.
(phypGetVIOSPartitionID): Likewise. Also avoid non-portable use
of 'sed -s'.
Eric Blake [Thu, 24 Jun 2010 21:05:16 +0000 (15:05 -0600)]
phyp: reduce scope of driver functions
Several phyp functions are not namespace clean, and had no reason
to be exported since no one outside the phyp driver needed to use
them. Rather than do lots of forward declarations, I was able
to topologically sort the file. So, this patch looks huge, but
is really just a matter of marking things static and dealing with
the compiler fallout.
* src/phyp/phyp_driver.h (PHYP_DRIVER_H): Add include guard.
(phypCheckSPFreeSapce): Delete unused declaration.
(phypGetSystemType, phypGetVIOSPartitionID, phypCapsInit)
(phypBuildLpar, phypUUIDTable_WriteFile, phypUUIDTable_ReadFile)
(phypUUIDTable_AddLpar, phypUUIDTable_RemLpar, phypUUIDTable_Pull)
(phypUUIDTable_Push, phypUUIDTable_Init, phypUUIDTable_Free)
(escape_specialcharacters, waitsocket, phypGetLparUUID)
(phypGetLparMem, phypGetLparCPU, phypGetLparCPUGeneric)
(phypGetRemoteSlot, phypGetBackingDevice, phypDiskType)
(openSSHSession): Move declarations to phyp_driver.c and make static.
* src/phyp/phyp_driver.c: Rearrange file contents to provide
topological sorting of newly-static funtions (no semantic changes
other than reduced scope).
(phypGetBackingDevice, phypDiskType): Mark unused, for now.
The previous change which split -nodefconfig probing off
from -device broke the test case because it missed adding
the QEMUD_CMD_FLAG_NODEFCONFIG to the test
* src/util/bridge.c: Set QEMUD_CMD_FLAG_NODEFCONFIG for all
configs with QEMUD_CMD_FLAG_DEVICE set
Fix migration in text mode and shared storage migration in json mode
The patches for shared storage migration were not correctly written
for json mode. Thus the 'blk' and 'inc' parameters were never being
set. In addition they didn't set the QEMU_MONITOR_MIGRATE_BACKGROUND
so migration was synchronous. Due to multiple bugs in QEMU's JSON
impl this wasn't noticed because it treated the sync migration requst
as asynchronous anyway. Finally 'background' parameter was converted
to take arbitrary flags but not renamed, and not all uses were changed
to unsigned int.
* src/qemu/qemu_driver.c: Set QEMU_MONITOR_MIGRATE_BACKGROUND in
doNativeMigrate
* src/qemu/qemu_monitor_json.c: Process QEMU_MONITOR_MIGRATE_NON_SHARED_DISK
and QEMU_MONITOR_MIGRATE_NON_SHARED_INC flags
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h,
src/qemu/qemu_monitor_json.h, src/qemu/qemu_monitor_text.c,
src/qemu/qemu_monitor_text.h: change 'int background' to
'unsigned int flags' in migration APIs. Add logging of flags
parameter
During incoming migration the QEMU monitor is not able to be
used. The incoming migration code did not keep hold of the
job lock because migration is split across multiple API calls.
This meant that further monitor commands on the guest would
hang until migration finished with no timeout.
In this change the qemuDomainMigratePrepare method sets the
job flag just before it returns. The qemuDomainMigrateFinish
method checks for this job flag & clears it once done. This
prevents any use of the monitor between prepare+finish steps.
The qemuDomainGetJobInfo method is also updated to refresh
the job elapsed time. This means that virsh domjobinfo can
return time data during incoming migration
* src/qemu/qemu_driver.c: Keep a job active during incoming
migration. Refresh job elapsed time when returning job info
Set labelling for character devices in security drivers
When configuring serial, parallel, console or channel devices
with a file, dev or pipe backend type, it is necessary to label
the file path in the security drivers. For char devices of type
file, it is neccessary to pre-create (touch) the file if it does
not already exist since QEMU won't be allowed todo so itself.
dev/pipe configs already require the admin to pre-create before
starting the guest.
* src/qemu/qemu_security_dac.c: set file ownership for character
devices
* src/security/security_selinux.c: Set file labeling for character
devices
* src/qemu/qemu_driver.c: Add character devices to cgroup ACL
The parallel, serial, console and channel devices are all just
character devices. A lot of code needs todo the same thing to
all these devices. This provides an convenient API for iterating
over all of them.
Laine Stump [Thu, 24 Jun 2010 18:49:51 +0000 (14:49 -0400)]
Check for presence of qemu -nodefconfig option before using it
We previously assumed that if the -device option existed in qemu, that
-nodefconfig would also exist. It turns out that isn't the case, as
demonstrated by qemu-kvm-0.12.3 in Fedora 13.
*/src/qemu/qemu_conf.[hc] - add a new QEMUD_CMD_FLAG, set it via the
help output, and check it before adding
-nodefconfig to the qemu commandline.
Matthias Bolte [Tue, 15 Jun 2010 22:17:34 +0000 (00:17 +0200)]
Add wide SCSI bus disk address generation support
The domain XML parsing code autogenerates disk address and
controller elements when they are not explicitly specified.
The code assumes a narrow SCSI bus (7 units per bus). ESX
uses a wide SCSI bus (16 units per bus).
This is a step towards controller support for the ESX driver.
Matthias Bolte [Tue, 22 Jun 2010 13:20:23 +0000 (15:20 +0200)]
Cleanup some LIBADD and CFLAGS
Move libnl to libvirt_util.la, because macvtap.c requires it.
Add GnuTLS to libvirt_driver.la, because libvirt.c calls gcrypt functions.
When built without loadable driver modules, then the remote driver pulls
in GnuTLS.
Move libgnu.la from libvirt_parthelper_CFLAGS to libvirt_parthelper_LDADD.
Ryota Ozaki [Wed, 23 Jun 2010 16:00:56 +0000 (01:00 +0900)]
cgroup: Enable memory.use_hierarchy of cgroup for domain
Through conversation with Kumar L Srikanth-B22348, I found
that the function of getting memory usage (e.g., virsh dominfo)
doesn't work for lxc with ns subsystem of cgroup enabled.
This is because of features of ns and memory subsystems.
Ns creates child cgroup on every process fork and as a result
processes in a container are not assigned in a cgroup for
domain (e.g., libvirt/lxc/test1/). For example, libvirt_lxc
and init (or somewhat specified in XML) are assigned into
libvirt/lxc/test1/8839/ and libvirt/lxc/test1/8839/8849/,
respectively. On the other hand, memory subsystem accounts
memory usage within a group of processes by default, i.e.,
it does not take any child (and descendant) groups into
account. With the two features, virsh dominfo which just
checks memory usage of a cgroup for domain always returns
zero because the cgroup has no process.
Setting memory.use_hierarchy of a group allows to account
(and limit) memory usage of every descendant groups of the group.
By setting it of a cgroup for domain, we can get proper memory
usage of lxc with ns subsystem enabled. (To be exact, the
setting is required only when memory and ns subsystems are
enabled at the same time, e.g., mount -t cgroup none /cgroup.)
Ryota Ozaki [Wed, 23 Jun 2010 16:00:55 +0000 (01:00 +0900)]
cgroup: Change virCgroupRemove to remove all descendant groups at first
As same as normal directories, a cgroup cannot be removed if it
contains sub groups. This patch changes virCgroupRemove to remove
all descendant groups (subdirectories) of a target group before
removing the target group.
The handling is required when we run lxc with ns subsystem of cgroup.
Ns subsystem automatically creates child cgroups on every process
forks, but unfortunately the groups are not removed on process exits,
so we have to remove them by ourselves.
With this patch, such child (and descendant) groups are surely removed
at lxc shutdown, i.e., lxcVmCleanup which calls virCgroupRemove.
Eric Blake [Wed, 9 Jun 2010 15:12:56 +0000 (09:12 -0600)]
virsh: document attach-disk better
http://bugzilla.redhat.com/601143, part 1 - document existing
behavior. Ever since Mar 2010 (commit ced154cb), the use of
'attach-disk' or 'attach-device' to change cdrom/floppy media has been
documented but deprecated, but the replacement to use 'update-device'
was not documented.
* tools/virsh.c (cmdAttachInterface, cmdAttachDisk): Fix bad error
message.
* tools/virsh.pod (attach-device, attach-disk): Refer to
update-device for cdrom and floppy behavior.
(update-device): Add documentation.
We already use the '-nodefaults' command line arg with QEMU to stop
it adding any default devices to guests. Unfortunately, QEMU will
load global config files from /etc/qemu that may also add default
devices. These aren't blocked by '-nodefaults', so we need to also
add the '-nodefconfig' arg to prevent that.
Unfortunately these global config files are also used to define
custom CPU models. So in blocking global hardware device addition
we also block definitions of new CPU models. Libvirt doesn't know
about these custom CPU models though, so it would never make use
of them anyway. Thus blocking them via -nodefconfig isn't a show
stopping problem. We would need to expand libvirt's own CPU model
XML database to support these instead.
* src/qemu/qemu_conf.c: Add '-nodefconfig' if available
* tests/qemuxml2argvdata/: Add '-nodefconfig' to all data files which
have '-nodefaults' present
The current code pattern requires that callers of qemuMonitorClose
check for the return value == 0, and if so, set priv->mon = NULL
and release the reference held on the associated virDomainObjPtr
The change d84bb6d6a3bd2fdd530184cc9743249ebddbee71 violated that
requirement, meaning that priv->mon never gets set to NULL, and
a reference count is leaked on virDomainObjPtr.
This design was a bad one, so remove the need to check the return
valueof qemuMonitorClose(). Instead allow registration of a
callback that's invoked just when the last reference on qemuMonitorPtr
is released.
Finally there was a potential reference leak in qemuConnectMonitor
in the failure path.
* src/qemu/qemu_monitor.c, src/qemu/qemu_monitor.h: Add a destroy
callback invoked from qemuMonitorFree
* src/qemu/qemu_driver.c: Use the destroy callback to release the
reference on virDomainObjPtr when the monitor is freed. Fix other
potential reference count leak in connecting to monitor
Before issuing monitor commands it is neccessary to check whether
the guest is still running. Most places use virDomainIsActive()
correctly, but a few relied on 'priv->mon != NULL'. In theory
these should be equivalent, but the release of the last reference
count on priv->mon can be delayed a small amount of time until
the event handler is finally deregistered. A further ref counting
bug also means that priv->mon might be never released. In such a
case, code could mistakenly issue a monitor command and wait for
a response that will never arrive, effectively leaving the QEMU
driver waiting on virCondWait() forever..
To protect against these possibilities, make sure all code uses
virDomainIsActive(), not 'priv->mon != NULL'
* src/qemu/qemu_driver.c: Replace 'priv->mon != NULL' with
calls to 'priv->mon != NULL'()
Jiri Denemark [Tue, 22 Jun 2010 14:47:02 +0000 (16:47 +0200)]
Don't leak open fd to virsh in libvirt-guests init script
Running virsh while having /var/lib/libvirt/libvirt-guests file open
makes SELinux emit messages about preventing virsh from reading that
file. Since virsh doesn't really want to read anything, it's better to
run it with /dev/null on stdin to prevent those messages.
Stefan Berger [Mon, 21 Jun 2010 18:18:31 +0000 (14:18 -0400)]
nwfilter: fix loadable module support
Following Daniel Berrange's multiple helpful suggestions for improving
this patch and introducing another driver interface, I now wrote the
below patch where the nwfilter driver registers the functions to
instantiate and teardown the nwfilters with a function in
conf/domain_nwfilter.c called virDomainConfNWFilterRegister. Previous
helper functions that were called from qemu_driver.c and qemu_conf.c
were move into conf/domain_nwfilter.h with slight renaming done for
consistency. Those functions now call the function expored by
domain_nwfilter.c, which in turn call the functions of the new driver
interface, if available.
Jiri Denemark [Thu, 17 Jun 2010 14:45:29 +0000 (16:45 +0200)]
Misc cleanups
- Fix documentation for virGetStorageVol: it has 'key' argument instead
of 'uuid'.
- Remove TODO comment from virReleaseStorageVol: we use volume key as an
identifier instead of UUID.
- Print human-readable UUID string in debug message in virReleaseSecret.
Jiri Denemark [Thu, 17 Jun 2010 14:45:26 +0000 (16:45 +0200)]
Index hashes by UUID instead of name
Per-connection hashes for domains, networks, storage pools and network
filter pools were indexed by names which was not the best choice. UUIDs
are better identifiers, so lets use them.
Philipp Hahn [Tue, 15 Jun 2010 09:44:48 +0000 (11:44 +0200)]
Allow one-or-more <boot dev="..."/> entries
According to docs/formatdomain.html.in, "The boot element can be
repeated multiple times to setup a priority list of boot devices to try
in turn." The Relax-NG schema required / allowed exactly one entry.
Cole Robinson [Tue, 1 Jun 2010 19:10:19 +0000 (15:10 -0400)]
qemu: Fix crash on failed VM startup
If VM startup fails early enough (can't find a referenced USB device),
libvirtd will crash trying to clear the VNC port bit, since port = 0,
which overflows us out of the bitmap bounds.
Fix this by being more defensive in the bitmap operations, and only
clearing a previously set VNC port.
Philipp Hahn [Tue, 15 Jun 2010 09:44:13 +0000 (11:44 +0200)]
Fix description of virStorageVolGetInfo()
Probably a copy-paste-bug in python/libvirt-override-api.xml:
virStorageVolGetInfo() extracts information about a "storage volume",
not the "storage pool" as virStoragePoolGetInfo() does.
Eric Blake [Thu, 10 Jun 2010 02:23:51 +0000 (20:23 -0600)]
qemu: reduce file padding requirements
Followup to https://bugzilla.redhat.com/show_bug.cgi?id=599091,
commit 20206a4b, to reduce disk waste in padding.
* src/qemu/qemu_monitor.h (QEMU_MONITOR_MIGRATE_TO_FILE_BS): Drop
back to 4k.
(QEMU_MONITOR_MIGRATE_TO_FILE_TRANSFER_SIZE): New macro.
* src/qemu/qemu_driver.c (qemudDomainSaveFlag): Update comment.
* src/qemu/qemu_monitor_text.c (qemuMonitorTextMigrateToFile): Use
two invocations of dd to output non-aligned large blocks.
* src/qemu/qemu_monitor_json.c (qemuMonitorJSONMigrateToFile):
Likewise.
Stefan Berger [Thu, 17 Jun 2010 18:12:34 +0000 (14:12 -0400)]
nwfilter: add XML attribute to control iptables state match
This patch adds an optional XML attribute to a nwfilter rule to give the user control over whether the rule is supposed to be using the iptables state match or not. A rule may now look like shown in the XML below with the statematch attribute either having value '0' or 'false' (case-insensitive).
Justin Clift [Thu, 17 Jun 2010 07:57:12 +0000 (17:57 +1000)]
virsh: ensure persistence and autostart are shown for dominfo and pool-info
This patch adds the persistence status (yes/no) to the output of the virsh
dominfo and pool-info commands. This patch also adds the autostart status
to the output of the virsh pool-info command.
Stefan Berger [Thu, 17 Jun 2010 11:05:38 +0000 (07:05 -0400)]
macvtap: work-around for 2.6.32 and older kernels
This patch works around a recent extension of the netlink driver I had made use of when building the netlink messages. Unfortunately older kernels don't accept IFLA_IFNAME + name of interface as a replacement for the interface's index, so this patch now gets the interface index ifindex if it's not provided (ifindex <= 0).
projects / libvirt.git / log