Zheng Li [Thu, 25 Sep 2014 17:34:58 +0000 (18:34 +0100)]
oxenstored: use hash table to store socket connections
Currently we use list to store socket connections. This is fine for smaller
number of connections. But when we scale up, traveling through a list of
hundreds or thousands of connections just to find a single one of them is very
low efficient.
This patch replaces the list with a (Unix.file_descr -> Connection.t) hash table.
Signed-off-by: Zheng Li <dev@zheng.li> Reviewed-by: David Scott <dave.scott@citrix.com>
Zheng Li [Thu, 25 Sep 2014 17:34:57 +0000 (18:34 +0100)]
oxenstored: catch the error when a connection is already deleted
The function process_fdset_with is called on the read set connections first.
During the process, it might destroy a connection and remove it from the
connections database if some errors occur. However, a reference to the same
connection might still exist in the write set, which is awaiting to be
processed next. In this case, a Not_found error will be raised and the process
is aborted.
This patch changes the logic to ignore connections just missing from the
connection database and continue the rest part of the work.
Signed-off-by: Zheng Li <dev@zheng.li> Reviewed-by: David Scott <dave.scott@citrix.com>
Zheng Li [Thu, 25 Sep 2014 17:34:55 +0000 (18:34 +0100)]
oxenstored: add facilities to raise the max open fds uplimit
To go beyond 1024 fds, we also need to raise the process limitation on max
open fds (usually defaults to 1024).
We need to know the system level max open fds so that we won't go above that.
Simply setting the limit to RLIM_INFINITY doesn't work on Linux 3.x (EPERM), a
patch on this went into the 2.x branch but not 3.x for some reason.
Signed-off-by: Zheng Li <dev@zheng.li> Reviewed-by: David Scott <dave.scott@citrix.com>
Zheng Li [Thu, 25 Sep 2014 17:34:54 +0000 (18:34 +0100)]
oxenstored: add a poll-based select mechanism
Currently, oxenstored uses Unix.select underneath, so it doesn't work properly
if given a FD number >= 1024. This is a scalability bottleneck for hosts
running large number of VMs.
To remove this limitation, we implemented a poll-based mechanism but with the
same type signature as the Unix.select currently in use. So these two functions
can be interchangeable at any stage.
Signed-off-by: Zheng Li <dev@zheng.li> Reviewed-by: David Scott <dave.scott@citrix.com>
Andrew Cooper [Tue, 7 Oct 2014 11:02:10 +0000 (12:02 +0100)]
tools/ocaml: Gate building tests on CONFIG_TESTS
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> CC: David Scott <dave.scott@eu.citrix.com> CC: Ian Campbell <Ian.Campbell@citrix.com> CC: Ian Jackson <Ian.Jackson@eu.citrix.com> CC: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: David Scott <dave.scott@citrix.com>
Andrew Cooper [Tue, 7 Oct 2014 11:02:09 +0000 (12:02 +0100)]
tools/xenstore: Only create SBINDIR if it is to be used
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> CC: Ian Campbell <Ian.Campbell@citrix.com> CC: Ian Jackson <Ian.Jackson@eu.citrix.com> CC: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Andrew Cooper [Tue, 7 Oct 2014 11:02:08 +0000 (12:02 +0100)]
tools/xenstore: Introduce clients-install target
...to match the existing 'clients' built target. This is particularly useful
when rebuilding the xenstore clients separately for a non-dom0 environment.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> CC: Ian Campbell <Ian.Campbell@citrix.com> CC: Ian Jackson <Ian.Jackson@eu.citrix.com> CC: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Andrew Cooper [Tue, 7 Oct 2014 11:02:07 +0000 (12:02 +0100)]
gitignore: Cleanup
This is a rough pruning based mainly on directories which no longer exist.
Some of this was code deleted in 2007.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> CC: Keir Fraser <keir@xen.org> CC: Jan Beulich <JBeulich@suse.com> CC: Tim Deegan <tim@xen.org> CC: Ian Campbell <Ian.Campbell@citrix.com> CC: Ian Jackson <Ian.Jackson@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering [Wed, 8 Oct 2014 07:41:27 +0000 (09:41 +0200)]
Remove dead qemu code from toplevel Makefile
After commit b0f69ec5c71de1248d915c193b57c43e786857dd ("tools: Make
qemu-xen-traditional build optional.") the existing make targets are
wrapped in ifeq ($(CONF),y), but CONF is never set because
config/Tools.mk is not included.
Drop the dead code. The same effect can be achieved by calling the make
commands directly, after calling configure.
A better approach would be a simple, single 'make $something' which
should be a wrapper around a targets in tools/Makefile that clones,
updates and cleans the subprojects. That has to be worked out in a
different patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering [Tue, 7 Oct 2014 14:15:46 +0000 (16:15 +0200)]
stubdom: another for fix for lwip compile
stubdom/lwip-x86_64/src/core/dhcp.c: In function 'dhcp_create_request':
stubdom/lwip-x86_64/src/core/dhcp.c:1361:64: error: array subscript is above array bounds
The previous attempt to fix the failure above worked fine in SLE11,
openSUSE 13.1 and newer. But gcc-4.5 as included in openSUSE 11.4 still
failed to compile. To fix compilation also with this version of gcc move
the range check right into the code instead of assigning it to a
temporary variable.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering [Mon, 6 Oct 2014 13:22:40 +0000 (15:22 +0200)]
tools/ocaml: use APPEND_CFLAGS and APPEND_LDFLAGS
While implementing the --enable-rpath change I noticed that a ocaml
build does not use APPEND_LDFLAGS. Make use of APPEND_CFLAGS and
APPEND_LDFLAGS as it is done already in other places.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: David Scott <dave.scott@eu.citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: David Scott <dave.scott@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering [Tue, 7 Oct 2014 14:04:06 +0000 (16:04 +0200)]
config: remove unused MSGFMT and MSGMERGE
Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering [Tue, 7 Oct 2014 08:51:31 +0000 (10:51 +0200)]
Fix comment typo in m4/paths.m4
Please rerun autogen.sh after applying this patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering [Mon, 6 Oct 2014 13:42:53 +0000 (15:42 +0200)]
stubdom: remove references to xend from README
.. the xl part of the config is right above the removed lines.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Olaf Hering [Mon, 6 Oct 2014 13:37:49 +0000 (15:37 +0200)]
tools: remove references to xend-config.sxp
xend is gone. Remove references to its config file.
Also remove python script sxp-pretty which relies on removed code.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering [Mon, 6 Oct 2014 14:25:28 +0000 (16:25 +0200)]
tools/tests: remove code using xend
Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering [Mon, 6 Oct 2014 13:55:26 +0000 (15:55 +0200)]
tools/hotplug: update rc.d dependency for NetBSD
While searching remaining xend strings I noticed that xen-domains wants
xencommons as dependency now.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Ian Jackson [Wed, 24 Sep 2014 14:22:08 +0000 (15:22 +0100)]
libxl: Fix error handling in libxl_userdata_unlink
Previously:
* rc would not be set before leaving the function, with the
result that an uninitialised value would be returned
* failures of libxl__userdata_path would result in a NULL dereference
* failures of unlink() would not be usefully logged
This appears to be due to an attempt to avoid having to repeat the
call to libxl__unlock_domain_userdata by informally sharing parts of
the success and failure paths.
Change to use the canonical error-handling style:
* Initialise lock to 0.
* Do the unlock in the `out' section - always attempt to unlock
lock if it is non-0.
* Explicitly set rc and `goto out' on all error paths, even
those right at the end of the function.
* Add an error check for filename = libxl__userdata_path(...);
Coverity-ID: 1240237, 1240235. CC: Wei Liu <wei.liu2@citrix.com> CC: coverity@xenproject.org Reviewed-by: Andrew Cooper<andrew.cooper3@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:29 +0000 (18:41 +0200)]
move vtpmmgr helpers from tools to stubdom
Tools.mk contains a dead CONFIG_VTPM, @vtpm@ is never expanded because
@vtpm@ is only known by stubdom/configure.ac. Move the two perl scripts
to stubdom/vtpmmgr and install them as executeable. This was introduced
by the recent commit ffa11862aa431494e809c6e99f7358c12cb67e44 ("vtpmmgr:
add example control tools")
Also remove vtpm= from config/Stubdom.mk because vtpm= is (appearently)
not used by make itself.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:28 +0000 (18:41 +0200)]
tools/hotplug: Use XEN_RUN_DIR instead of /var/run/xen
Also remove duplicate XEN_RUN_DIR from m4/paths.m4.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:27 +0000 (18:41 +0200)]
tools: use XEN_LIB_STORED instead of /var/lib/xenstored
Remove hardcoded /var/lib/xenstored instead of using the existing
XEN_LIB_STORED variable.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:26 +0000 (18:41 +0200)]
Use Paths.mk for docs, stubdom and tools build
Paths.mk contains just directories set by configure.
Source this file first when building docs,stubdom or tools.
Remove unused path variables from $subsystem.mk.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:25 +0000 (18:41 +0200)]
tools: remove private copies of includedir and libdir from libxenstat
They are wrong and unused.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:24 +0000 (18:41 +0200)]
Make XENFIRMWAREDIR a subdir of libexecdir
Put the firmware files below libexecdir. This is essentially just a new
name for the existing path. It has the benefit that it can be configured
via --libexecdir= if required.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:23 +0000 (18:41 +0200)]
Add configure --with-sysconfig-leaf-dir=SUBDIR to set CONFIG_LEAF_DIR
Set CONFIG_LEAF_DIR with configure to give control if needed. The
check for the correct value if the option is not specified is tricky.
Since other packages (such as grub2) started to populate also
/etc/default/ a given system may have both directories.
Use "default" only if /etc/sysconfig does not exist. "sysconfig"
remains the default.
Move the variable from StdGNU.mk to Linux.mk because thats the only
place where it is used.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:22 +0000 (18:41 +0200)]
Move variable to set bash_completion.d to Paths.mk
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
This replaces config/Linux.modules with a configure option. As a result
of this change only a single xencomons.in is required, instead of a
xencomons.in.in and sed hackery.
After this change blktap2 and blktap will be loaded at the same time.
This is already done in out-of-tree xencommons scripts, and systemd will
load both modules as well. No harm is expected by loading both modules.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:20 +0000 (18:41 +0200)]
Add configure --enable-rpath
This fixes the tools when xen is configured with --prefix=/odd/path
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:19 +0000 (18:41 +0200)]
Use configure --localstatedir=BASEDIR to set path to /var
This is helpful to test make uninstall with --prefix=/private/dir as
unprivileged user. No change in behaviour is expected by this change.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:18 +0000 (18:41 +0200)]
Use configure --prefix=DIR to set PREFIX
PREFIX is set by configure --prefix=DIR, nothing outside
tools,docs,stubdom is using this variable.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:17 +0000 (18:41 +0200)]
Use configure --libexecdir=BASEDIR to set LIBEXEC
The current usage of LIBEXEC is bogus. It describes the directory for
private xen executables. Other places create their own, similar
libexecdir path as $prefix/lib/xen/*.
Additional two other variables are used to describe similar paths:
PRIVATE_BINDIR and PRIVATE_PREFIX
The autoconf documentation refers to libexec as a directory for
executables and stuff which is called by other programs, not by the
user.
Adjust all places that want libexecdir as a target path. LIBEXEC refers
now to the base directory. Three convenience variables are used to refer
to paths to private binaries, libs and include files.
In the systemd files LIBEXEC_BIN is substituted, so this variable has to
be present in autoconf. All other variables are expanded in Paths.mk
because they are only used in Makefiles.
Most users of LIBEXEC are updated to use LIBEXEC_BIN because that is
what they want.
Users of PRIVATE_BINDIR are updated to use LIBEXEC_BIN because that is
what they want. PRIVATE_BINDIR and PRIVATE_PREFIX usage is removed by
this patch, in favour of LIBXEC_BIN and LIBEXEC
An internal libxl function was removed. A single helper to retrieve
LIBEXEC_BIN remains.
As suggested by the autoconf documentation, configure appends the
package name to LIBEXEC to make sure the provided directory really
refers to xen. This makes sure "make uninstall" preserves the real
libexecdir.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: George Dunlap <george.dunlap@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested, updated QEMU_TRADITIONAL_REVISION to
pickup version which uses LIBEXEC_BIN ]
Olaf Hering [Wed, 1 Oct 2014 16:41:16 +0000 (18:41 +0200)]
Use configure --includedir=DIR to set INCLUDEDIR
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:15 +0000 (18:41 +0200)]
Use configure --docdir=DIR to set DOCDIR
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:14 +0000 (18:41 +0200)]
Use configure --mandir=DIR to set MANDIR
Also move common MAN8DIR and MAN1DIR to Paths.mk.in
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:13 +0000 (18:41 +0200)]
tools: substitute bindir instead of BINDIR
... and same for sbindir and libdir.
Expand usage of exec_prefix so that it does not appear in substituted
variables in systemd files.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Akced-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:12 +0000 (18:41 +0200)]
Substitue configure variables in Paths.mk.in
This patch lays the groundwork to convert variables used in Makefiles
to the common automake style, i.e. PREFIX becomes prefix, MANDIR becomes
mandir and so on.
The reason is that configure variables such as mandir expand to
${datarootdir}/man, and datarootdir expands to ${prefix}/share. This
requires extra expansion in configure.ac before assigning to MANDIR.
Special care must be taken when variable substition is done in other
files, such as xencommons.in. All @VARIABLES@ used in these files have
to be the expanded version, or all other variables must be available at
runtime.
This patch by itself changes nothing, but upcoming changes will make use
of the lowercase variables.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:11 +0000 (18:41 +0200)]
remove duplicate variables from config
... because they are already in Paths.mk:
BINDIR, LIBEXEC, PRIVATE_BINDIR, PRIVATE_PREFIX, SBINDIR, SHAREDIR,
XEN_CONFIG_DIR, XENFIRMWAREDIR, XEN_LOCK_DIR, XEN_PAGING_DIR,
XEN_RUN_DIR. Remove unused PKG_XEN_PREFIX, which was also incorrectly
assigned to PRIVATE_PREFIX.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:10 +0000 (18:41 +0200)]
tools/hotplug: substitute XEN_SCRIPT_DIR on FreeBSD
Also remove DESTDIR from the path, this was most likely not intended.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:09 +0000 (18:41 +0200)]
tools/hotplug: use INITD_DIR instead of CONFIG_DIR/init.d|rc.d
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:08 +0000 (18:41 +0200)]
tools/configure.ac: sort AC_CONFIG_FILES
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:07 +0000 (18:41 +0200)]
tools/hotplug: use XEN_SCRIPT_DIR instead of hardcoded path
Helper scripts get installed into XEN_SCRIPT_DIR, but initscripts,
helper scripts and udev rules still refer to the hardcoded location
/etc/xen/scripts/. Update scripts, rules and Makefile to refer to
@XEN_SCRIPT_DIR@ instead.
Update configure.ac to substitute the path in files using
XEN_SCRIPT_DIR. Remove XEN_SCRIPT_DIR from StdGNU.mk and SunOS.mk, its
already in Paths.mk.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Olaf Hering [Wed, 1 Oct 2014 16:41:05 +0000 (18:41 +0200)]
tools/python: use also LDFLAGS for build
An upcoming change will pass -Wl,-rpath to xc.so. Make sure such LDFLAGS
will be used for python libs.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
Olaf Hering [Wed, 1 Oct 2014 16:41:04 +0000 (18:41 +0200)]
tools/hotplug: fix race during xen.conf creation
A make -j8 will call the xen.conf rule twice. The move-if-changed
macro may fail if the tmp file was already removed by the other make
process. Fix this by let the all target depend on install.
Also remove the generated file with make clean.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- fixed s/of/if/ typo in commit message ]
Olaf Hering [Wed, 1 Oct 2014 16:41:03 +0000 (18:41 +0200)]
tools: fix make uninstall
The uninstall target does not know about the paths it removes because
the toplevel Makefile does not include the required files.
Move the commands to tools/Makefile because all files come from subdirs
in tools/ anyway. Drop the removal of $(XEN_RUN_DIR) because it gets
created at runtime. Drop the removal of systemd related files because
the wildcard matches everything.
The proper fix is to remove the files and directories in the Makefiles
which install them. But this version is the least intrusive change at
this point.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Wei Liu <wei.liu2@citrix.com>
xen/arm: check on domain type against hardware support
Some arm64 platforms implement only aarch64 mode. So allow
domains that are only 64-bit
Signed-off-by: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- s/cpu_has_a32/cpu_has_arm/ as discussed on list ]
xen/arm: Deliver interrupts to vcpu specified in IROUTER
In GICv3 use IROUTER register contents to deliver irq to
specified vcpu.
vgic irouter[irq] is used to represent vcpu number for which
irq affinity is assigned. Bit[31] is used to store IROUTER
bit[31] value to represent irq mode.
Tamas K Lengyel [Mon, 29 Sep 2014 15:55:13 +0000 (17:55 +0200)]
xen/arm: Add p2m_set_permission and p2m_shatter_page helpers.
Signed-off-by: Tamas K Lengyel <tklengyel@sec.in.tum.de> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Julien Grall <julien.grall@linaro.org>
Dongxiao Xu [Mon, 6 Oct 2014 10:43:20 +0000 (12:43 +0200)]
x86: enable CMT for each domain RMID
If the CMT service is attached to a domain, its related RMID
will be set to hardware for monitoring when the domain's vcpu is
scheduled in. When the domain's vcpu is scheduled out, RMID 0
(system reserved) will be set for monitoring.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Acked-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Dongxiao Xu [Mon, 6 Oct 2014 10:42:32 +0000 (12:42 +0200)]
x86: collect global CMT information
This implementation tries to put all policies into user space, thus some
global CMT information needs to be exposed, such as the total RMID count,
L3 upscaling factor, etc.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Acked-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Dongxiao Xu [Mon, 6 Oct 2014 10:35:55 +0000 (12:35 +0200)]
libxc: provide interface for generic resource access
Xen added a new platform_op hypercall for generic MSR access, and this
is the the tool side change to wrapper the hypercall into xc APIs.
For non-preemptible batch resource operations, group them in entries of
xc_resource_op structure. For preemptible ones, use multiple
xc_resource_op structure instead.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Add a generic resource access hypercall for tool stack or other
components, e.g., accessing MSR, port I/O, etc.
The resource is abstracted as a resource address/value pair.
The resource access can be any type of XEN_RESOURCE_OP_*(current
only support MSR and it's white-listed). The resource operations
are always runs on cpu that caller specified. If caller does not
care this, it should use current cpu to eliminate the IPI overhead.
Batch resource operations in one call are also supported but the
max number currently is limited to 2. The operations in a batch are
non-preemptible and execute in their original order. If preemptible
batch is desirable, then multicall mechanism can be used.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com> Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jan Beulich [Mon, 6 Oct 2014 09:22:04 +0000 (11:22 +0200)]
x86/paging: make log-dirty operations preemptible
Both the freeing and the inspection of the bitmap get done in (nested)
loops which - besides having a rather high iteration count in general,
albeit that would be covered by XSA-77 - have the number of non-trivial
iterations they need to perform (indirectly) controllable by both the
guest they are for and any domain controlling the guest (including the
one running qemu for it).
Note that the tying of the continuations to the invoking domain (which
previously [wrongly] used the invoking vCPU instead) implies that the
tools requesting such operations have to make sure they don't issue
multiple similar operations in parallel.
Note further that this breaks supervisor-mode kernel assumptions in
hypercall_create_continuation() (where regs->eip gets rewound to the
current hypercall stub beginning), but otoh
hypercall_cancel_continuation() doesn't work in that mode either.
Perhaps time to rip out all the remains of that feature?
This is part of CVE-2014-5146 / XSA-97.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Tim Deegan <tim@xen.org> Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
docs, amd_ucode: add AMD container file format notes
This patch introduces documentation notes about AMD container
file formats and where to obtain latest container files from.
Also, We provide a how-to for updating patch level by
concatenating container files along with initrd images.
Misc notes about how Xen handles two containers of same
kind (if/when) they are concatenated together are also included.
Andrew Cooper [Mon, 6 Oct 2014 09:20:12 +0000 (11:20 +0200)]
AMD/guest_iommu: properly disable guest iommu support
AMD Guest IOMMU support was added to allow correct use of PASID and PRI
hardware support with an ATS-aware guest driver.
However, support cannot possibly function as guest_iommu_set_base() has no
callers. This means that its MMIO region's P2M pages are not set to
p2m_mmio_dm, preventing any invocation of the MMIO read/write handlers.
c/s fd186384 "x86/HVM: extend LAPIC shortcuts around P2M lookups" introduces a
path (via hvm_mmio_internal()) where iommu_mmio_handler claims its MMIO range,
and causes __hvm_copy() to fail with HVMCOPY_bad_gfn_to_mfn.
iommu->mmio_base defaults to 0, with a range of 8 pages, and is unilaterally
enabled in any HVM guests when the host IOMMU(s) supports any extended
features.
Unfortunately, HVMLoader's AP boot trampoline executes an `lmsw` instruction
at linear address 0x100c which unconditionally requires emulation. The
instruction fetch in turn fails as __hvm_copy() fails with
HVMCOPY_bad_gfn_to_mfn.
The result is that multi-vcpu HVM guests do not work on newer AMD hardware, if
IOMMU support is enabled in the BIOS.
Change the default mmio_base address to ~0ULL. This prevents
guest_iommu_mmio_range() from actually claiming any physical range
whatsoever, which allows the emulation of `lmsw` to succeed.
Reported-by: Roberto Luongo <rluongo@ready.it> Suggested-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Tested-by: Roberto Luongo <rluongo@ready.it> Acked-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Jan Beulich [Mon, 6 Oct 2014 09:15:01 +0000 (11:15 +0200)]
don't allow Dom0 access to IOMMUs' MMIO pages
Just like for LAPIC, IO-APIC, MSI, and HT we shouldn't be granting Dom0
access to these. This implicitly results in these pages also getting
marked reserved in the machine memory map Dom0 uses to determine the
ranges where PCI devices can have their MMIO ranges placed.
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> Acked-by: Kevin Tian <kevin.tian@intel.com>
Jan Beulich [Mon, 6 Oct 2014 09:13:19 +0000 (11:13 +0200)]
x86: restore reserving of IO-APIC pages in XENMEM_machine_memory_map output
Commit d1222afda4 ("x86: allow Dom0 read-only access to IO-APICs") had
an unintended side effect: By no longer adding IO-APIC pages to Dom0's
iomem_caps these also no longer get reported as reserved in the machine
memory map presented to it (which got added there intentionally by
commit b8a456caed ["x86: improve reporting through
XENMEM_machine_memory_map"] because many BIOSes fail to add these).
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Tim Deegan <tim@xen.org>
Jan Beulich [Mon, 6 Oct 2014 09:11:28 +0000 (11:11 +0200)]
x86/MSI: fix MSI-X case of freeing IRQ
Commit d1b6d0a024 ("x86: enable multi-vector MSI") went a little too
far with moving things around in msi_free_irqs() in order to streamline
the code: We shouldn't drop the MSI-X control page reference before
calling destroy_irq(), as the latter will call us back via
desc->handler->shutdown() (effectively invoking to msi_set_mask_bit()).
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
amd/seattle: Initial revision of AMD Seattle support
This patch add initial (minimal) platform support for AMD Seattle,
which mainly just define the matching ID, and specify system_off,
and system_reset mechanism.
Initially, the firmware only support a subset of PSCI-0.2 functions,
system-off and system-reset. The mechanism for bring up auxiliary processors
is still using spin-table.
Frediano Ziglio [Thu, 2 Oct 2014 15:16:37 +0000 (16:16 +0100)]
xen/arm: Fix crash if last memory section is bigger than 1gb
On arm32 the xenheap has a maximum size of 1GB. On systems with more than 8GB
(so 1/8 total RAM is greater than 1GB) there is no point in searching for a
region with 1/8 of the total RAM when only 1GB will be used. Therefore limit
the maximum size to 1GB before searching.
Jan Beulich [Thu, 2 Oct 2014 15:03:04 +0000 (17:03 +0200)]
x86/APIC: don't make wrong implications on constants
For the physical APIC, oprofile code was abusing APIC_DM_NMI as a mask.
For the virtual APIC, a wrong assumption was made that LVTPC could be
programmed to only fixed or NMI delivery modes. While other modes are
invalid here, we still shouldn't inject an NMI into the guest in such
a case. Instead just do nothing.
In the course of adjusting this it became obvious that what value
vpmu_do_interrupt() returns on its various return paths was pretty
arbitrary. With its only caller ignoring the return value, simply make
the function's return type "void".
Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Roy Franz [Thu, 2 Oct 2014 15:02:23 +0000 (17:02 +0200)]
arm64: create xen.efi binary for arm64
The 'xen' binary for arm64 is both an Image file and a PE/COFF executable,
copy it to xen.efi so that the 'make install' processing is shared with
x86. Prior to this 'make install' was broken on arm64.
Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Roy Franz [Thu, 2 Oct 2014 15:02:04 +0000 (17:02 +0200)]
EFI: update documentation for arm64
The arm64 EFI boot support added a new 'dtb' value to the configuration file.
Update the documentation to describe this and how the coniguration file is not
used when GRUB loads the modules. Updates 'ucode' description to indicate that
it is x86 only.
Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Jan Beulich <jbeulich@suse.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
libxc: fix mmap leak in xc_unmap_domain_meminfo/xc_map_domain_meminfo
xc_unmap_domain_meminfo uses P2M_FLL_ENTRIES macro instead of P2M_FL_ENTRIES.
Moreover, P2M_FL_ENTRIES macro uses (dinfo->p2m_size) which is always 0 here
as we don't initialize it. The result is that we always unmap just 1 frame.
xc_map_domain_meminfo uses P2M_FLL_ENTRIES macro instead of P2M_FL_ENTRIES
on failure path.
The issue went unnoticed mostly because we use unmap_domain_meminfo and
xc_map_domain_meminfo in one-shot xen-mfndump and xen-hptool (through
xc_exchange_page()) tools. When used is long-running apps (e.g. in xl)
domains become zombies after their death.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Julien Grall [Wed, 1 Oct 2014 15:13:41 +0000 (16:13 +0100)]
xen/arm: p2m: Correctly initialize cur_offset
{~0,} only initializes the first cell of the array to ~0. The other cells
are initialized to 0.
Explicitly initialize every cells of the array and, at the same time, do the
same for the mappings.
This is fixing boot after 82985d7 "xen: arm: handle variable p2m levels
in apply_p2m_changes" on platform where the root-level doesn't have
concatenate table (such as the Foundation Model).
Signed-off-by: Julien Grall <julien.grall@linaro.org> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Jan Beulich [Wed, 1 Oct 2014 12:54:47 +0000 (14:54 +0200)]
x86/HVM: properly bound x2APIC MSR range
While the write path change appears to be purely cosmetic (but still
gets done here for consistency), the read side mistake permitted
accesses beyond the virtual APIC page.
Note that while this isn't fully in line with the specification
(digesting MSRs 0x800-0xBFF for the x2APIC), this is the minimal
possible fix addressing the security issue and getting x2APIC related
code into a consistent shape (elsewhere a 256 rather than 1024 wide
window is being used too). This will be dealt with subsequently.
Roger Pau Monne [Wed, 1 Oct 2014 10:42:07 +0000 (12:42 +0200)]
xl: use nic global default values in network-attach
Introduce a new static function that will be used to set the initial nic
config based on the global defaults. This fixes a bug caused by
network-attach not using the default values set in xl.conf(5).
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Currently the hypervisor will hang if it hits a WARN_ON.
The implementation uses an undefined instruction, made ourself because ARM
don't provide one, to implement BUG/ASSERT/WARN_ON, and sets up the
different tables (one for each type) which contain useful information.
This is based on the x86 implementation (include/asm-x86/bug.h). Unfortunately
the structure can't be shared because many ARM{32,64} gcc versions doesn't
correctly support %c. The support for executing a function in an exception handler
is also keep unimplemented on ARM. Therefore, dump_execution_state is
implemented as WARN()
The current opcode used to go in exception mode may not be undefined on ARM64.
Use the instruction "brk" to generate a software debug exception.
Signed-off-by: Julien Grall <julien.grall@linaro.org> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Andrew Cooper [Wed, 1 Oct 2014 10:09:17 +0000 (11:09 +0100)]
tools/libxl: Initialise rc on error paths of libxl_domain_remus_start()
Coverity-ID: 1242320 Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> CC: Ian Campbell <Ian.Campbell@citrix.com> CC: Ian Jackson <Ian.Jackson@eu.citrix.com> CC: Wei Liu <wei.liu2@citrix.com> CC: Shriram Rajagopalan <rshriram@cs.ubc.ca> CC: Yang Hongyang <yanghy@cn.fujitsu.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering [Thu, 25 Sep 2014 13:08:14 +0000 (15:08 +0200)]
MAINTAINERS: handle buildsystem
Tweaking configure and friends is most likely not of much interest for
anyone beside the tools maintainers.
List such files, which are currently covered by "THE REST", in the
TOOLSTACK section. Also update list of stubdom related files.
Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Keir Fraser <keir@xen.org> Cc: Tim Deegan <tim@xen.org> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
Roy Franz [Fri, 26 Sep 2014 22:25:01 +0000 (15:25 -0700)]
Add ARM EFI boot support
This patch adds EFI boot support for ARM based on the previous refactoring of
the x86 EFI boot code. All ARM specific code is in the ARM efi-boot.h header
file, with the main EFI entry point common/efi/boot.c. The PE/COFF header is
open-coded in head.S, which allows us to have a single binary be both an EFI
executable and a normal arm64 IMAGE file. There is currently no PE/COFF
toolchain support for arm64, so it is not possible to create the PE/COFF header
in the same manner as on x86. This also simplifies the build as compared to
x86, as we always build the same executable, whereas x86 builds 2. An ARM
version of efi-bind.h is added, which is based on the x86_64 version with the
x86 specific portions removed. The Makefile in common/efi is different for x86
and ARM, as for ARM we always build in EFI support.
NR_MEM_BANKS is increased, as memory regions are now added from the UEFI memory map,
rather than memory banks from a DTB. The UEFI memory map may be fragmented so a larger
number of regions will be used.
Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Jan Beulich <jbeulich@suse.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- applied vga.h movement fixup patch from Roy, plus moved the xen/vga.h
include before the asm/* ones. ]
Tamas K Lengyel [Wed, 1 Oct 2014 09:40:36 +0000 (11:40 +0200)]
xsm: wrap mem_access blocks into HAS_MEM_ACCESS ifdefs
This patch wraps the XSM code corresponding to the mem_access and
mem_event code-paths into HAS_MEM_ACCESS ifdefs.
Signed-off-by: Tamas K Lengyel <tklengyel@sec.in.tum.de> Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov> Acked-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Julien Grall <julien.grall@linaro.org>
Paul Durrant [Wed, 1 Oct 2014 09:37:06 +0000 (11:37 +0200)]
ioreq-server: handle the lack of a default emulator properly
I started porting QEMU over to use the new ioreq server API and hit a
problem with PCI bus enumeration. Because, with my patches, QEMU only
registers to handle config space accesses for the PCI device it implements
all other attempts by the guest to access 0xcfc go nowhere and this was
causing the vcpu to wedge up because nothing was completing the I/O.
This patch introduces an I/O completion handler into the hypervisor for the
case where no ioreq server matches a particular request. Read requests are
completed with 0xf's in the data buffer, writes and all other I/O req types
are ignored.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com> Reviewed-by: Jan Beulich <jbeulich@suse.com>
* Introduce hvm_dump_emulation_state() to be a common implementation rather
than having the printk() open-coded slightly differently in 3 separate
places.
* Identify the vcpu operating mode to allow for unambiguous decoding of the
instruction bytes.
* A valid instruction can be up to 15 bytes long, but may also be shorter than
the current arbitrary 10 bytes. Print only the fetched bytes, which could
include nothing if the emulation failed due to an inability to fetch the
instruction.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Reviewed-by: Tim Deegan <tim@xen.org> Release-acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Kevin Tian <kevin.tian@intel.com>
FreeBSD doesn't use any qemu-ifup script in order to setup the network, it
is all done on the hotplug script like Linux.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Wei Liu <wei.liu2@citrix.com>
FreeBSD only allows reading multiples of sector size from raw disk devices
(character devices). This fix should only alter the behaviour of pygrub on
FreeBSD, the other supported OSes will continue using the same size.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Cc: Ian Jackson <ian.jackson@eu.citrix.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Wei Liu [Thu, 25 Sep 2014 14:23:10 +0000 (15:23 +0100)]
docs: fix one typo in pvh.markdown
were -> where
Signed-off-by: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Roger Pau Monne <roger.pau@citrix.com> Acked-by: Roger Pau Monné <roger.pau@citrix.com>
projects / xen.git / log