Andrea Bolognani [Mon, 26 Oct 2020 23:25:53 +0000 (00:25 +0100)]
news: Mention virt-ssh-helper detection fix
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Andrea Bolognani [Mon, 26 Oct 2020 23:15:33 +0000 (00:15 +0100)]
rpc: Fix virt-ssh-helper detection
When trying to figure out whether virt-ssh-helper is available
on the remote host, we mistakenly look for the helper by the
name it had while the feature was being worked on instead of
the one that was ultimately picked, and thus end up using the
netcat fallback every single time.
Fixes: f8ec7c842df9e40c6607eae9b0223766cb226336 Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Neal Gompa <ngompa13@gmail.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Andrea Bolognani [Mon, 26 Oct 2020 13:37:23 +0000 (14:37 +0100)]
NEWS: Fix vertical spacing between sections
Looking at the entire repository reveals we're not too consistent
about this, but at least in this specific document we mostly have
two blank lines between sections, so let's stick with that.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Michal Privoznik [Mon, 26 Oct 2020 10:28:13 +0000 (11:28 +0100)]
qemu_migration: Don't mangle NBD part of migration cookie
In recent commit v6.8.0-135-g518be41aaa the formatting of NBD
into migration cookie was moved into a separate function and with
it it was switched from direct printing into the output buffer to
virXMLFormatElement(). But there was a typo. The
virXMLFormatElement() accepts two buffers on input, one for
element attributes and another for child elements. Well, the line
that was supposed to add NBD port into the attributes buffer
printed the attribute directly into the output buffer which
produced this mangled XML:
Michal Privoznik [Mon, 26 Oct 2020 08:49:35 +0000 (09:49 +0100)]
qemu: Don't try to start NBD server twice
In one of recent patches the way that we start NBD server for
incoming migration was reworked (v6.8.0-rc1~298). A new boolean
was introduced that tracks whether the NBD server was started so
that we don't start it twice nor record in the port in the port
allocator twice. Well, this idea is good, but in the
implementation the boolean is never set, so we are reserving the
port twice and would be starting the NBD server twice too if it
wasn't for port reservation fail.
Fixes: e74d627bb3bc2684cbe3edc1e2f7cc745b4e1ff3 Reported-by: Vjaceslavs Klimovs <vklimovs@gmail.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
zhenwei pi [Fri, 23 Oct 2020 13:53:49 +0000 (21:53 +0800)]
news: introduce memory failure event
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Guests should be allowed to create hard links on mounted pathes, since
many applications rely on this functionality and would error on guest
with current "rw" AppArmor permission with 9pfs.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Fri, 23 Oct 2020 17:39:03 +0000 (19:39 +0200)]
qemu: Don't pass mode when opening domain log file for reading
In qemuDomainLogContextNew() the domain log file is opened.
Twice, the first time for writing, and the second time for
reading (if required by caller). When opening the log file for
reading a mode is provided. This doesn't do much harm, but is
unnecessary. Drop the mode.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Jonathon Jongsma [Wed, 14 Oct 2020 17:08:30 +0000 (12:08 -0500)]
Include vdpa devices in node device list
The current udev node device driver ignores all events related to vdpa
devices. Since libvirt now supports vDPA network devices, include these
devices in the device list.
Example output:
virsh # nodedev-list
[...ommitted long list of nodedevs...]
vdpa_vdpa0
NOTE: normally the 'parent' would be a PCI device instead of 'computer',
but this example output is from the vdpa_sim kernel module, so it
doesn't have a normal parent device.
Jonathon Jongsma [Wed, 21 Oct 2020 21:50:06 +0000 (16:50 -0500)]
qemu: fix potential resource leak
Coverity reported a potential resource leak. While it's probably not
a real-world scenario, the code could technically jump to cleanup
between the time that vdpafd is opened and when it is used. Ensure that
it gets cleaned up in that case.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Laine Stump <laine@redhat.com>
zhenwei pi [Wed, 14 Oct 2020 10:37:51 +0000 (18:37 +0800)]
qemu: implement memory failure event
Since QEMU 5.2 (commit-77b285f7f6), QEMU supports 'memory failure'
event, posts event to monitor if hitting a hardware memory error.
Fully support this feature for QEMU.
Test with commit 'libvirt: support memory failure event', build a
little complex environment(nested KVM):
1, install newly built libvirt in L1, and start a L2 vm. run command
in L1:
~# virsh event l2 --event memory-failure
2, run command in L0 to inject MCE to L1:
~# virsh qemu-monitor-command l1 --hmp mce 0 9 0xbd000000000000c0 0xd 0x62000000 0x8c
Test result in l1(recipient hypervisor case):
event 'memory-failure' for domain l2:
recipient: hypervisor
action: ignore
flags:
action required: 0
recursive: 0
Test result in l1(recipient guest case):
event 'memory-failure' for domain l2:
recipient: guest
action: inject
flags:
action required: 0
recursive: 0
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
zhenwei pi [Wed, 14 Oct 2020 10:37:50 +0000 (18:37 +0800)]
libvirt: support memory failure event
Introduce memory failure event. Libvirt should monitor domain's
event, then posts it to uplayer. According to the hardware memory
corrupted message, a cloud scheduler could migrate domain to another
health physical server.
Several changes in this patch:
public API:
include/*
src/conf/*
src/remote/*
src/remote_protocol-structs
With this patch, each driver could implement its own method to run
this new event.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 21 Oct 2020 12:36:16 +0000 (14:36 +0200)]
hyperv: Use hypervRequestStateChange() in hypervDomainSuspend()
A few commits ago, hypervRequestStateChange() helper was
introduced which has exactly the same code as a part of
hypervDomainSuspend(). Deduplicate by calling the helper.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Matt Coleman <matt@datto.com>
Peter Krempa [Tue, 20 Oct 2020 16:43:20 +0000 (18:43 +0200)]
Replace all instances of 'virHashCreate' with 'virHashNew'
It doesn't make much sense to configure the bucket count in the hash
table for each case specifically. Replace all calls of virHashCreate
with virHashNew which has a pre-set size and remove virHashCreate
completely.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Wed, 21 Oct 2020 07:41:50 +0000 (09:41 +0200)]
tests: hash: Prepare for replacement of virHashCreate
Most callers pass a random number. We have virHashNew which doesn't give
the callers the option to configure the table. Since we are going to
switch to virHashNew replace it in tests and remove multiple instances
of the 'testHashGrow' case as it doesn't make sense with the new
semantics.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Tue, 20 Oct 2020 15:01:51 +0000 (17:01 +0200)]
util: cgroup: Use GHashTable instead of virHashTable
Rewrite using GHashTable which already has interfaces for using a number
as hash key. Glib's implementation doesn't copy the key by default, so
we need to allocate it, but overal the interface is more suited for this
case.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Peter Krempa [Thu, 22 Oct 2020 07:56:46 +0000 (09:56 +0200)]
virCgroupKillRecursive: Return -1 on failure condition
virCgroupKillRecursive sneakily initializes 'ret' to 0 rather than the
usual -1. 401030499bf moved an error condition but didn't actually
modify 'ret' return the proper error code.
Fixes: 401030499bf Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Michal Privoznik [Thu, 22 Oct 2020 10:55:40 +0000 (12:55 +0200)]
parthelper: Don't leak @canonical_path
The @canonical_path variable holds canonicalized path passed as
argv[1]. The canonicalized path is obtained either via
virFileResolveLink() or plain g_strdup(). Nevertheless, in both
cases it must be freed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Michal Privoznik [Thu, 22 Oct 2020 10:49:44 +0000 (12:49 +0200)]
parthelper: Initialize error object
Some functions called from parthelper can report an error. But
that means that the error object must be initialized otherwise
virResetError() (which happens as a part of virReportError())
will free random pointers.
Reported-by: Katerina Koukiou <kkoukiou@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Use of the -enable-fips option is being deprecated in QEMU >= 5.2.0. If
FIPS compliance is required, QEMU must be built with libcrypt which will
unconditionally enforce it.
Thus there is no need for libvirt to pass -enable-fips to modern QEMU.
Unfortunately there was never any way to probe for -enable-fips in the
first instance, it was enabled by libvirt based on version number
originally, and then later unconditionally enabled when libvirt dropped
support for older QEMU. Similarly we now use a version number check to
decide when to stop passing -enable-fips.
Note that the qemu-5.2 capabilities are currently from the pre-release
version and will be updated once qemu-5.2 is released.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Wed, 21 Oct 2020 08:08:11 +0000 (10:08 +0200)]
qemuxml2argvtest: Sanitize testing of '-enable-fips'
Rename 'FLAG_FIPS' to 'FLAG_FIPS_HOST' to signify that we are simulating
a host supporting fips mode and use the flag to assert 'enabeFips'
argument of 'qemuProcessCreatePretendCmdBuild' rather than passing it
via QEMU_CAPS_ENABLE_FIPS.
This prepares the testsuite for testing of -enable-fips deprecation in
qemu-5.2.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Laine Stump [Sun, 11 Oct 2020 02:56:23 +0000 (22:56 -0400)]
util: avoid manual VIR_FREE of a g_autofree pointer in virPCIGetName()
thisPhysPortID is only used inside a conditional, so reduce its scope
to just the body of that conditional, which will eliminate the need
for the undesirable manual VIR_FREE().
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Laine Stump [Sun, 11 Oct 2020 01:47:16 +0000 (21:47 -0400)]
util: simplify virPCIProbeStubDriver()
This function had a loop that was only executed twice; it was
artificially constructed with a label, a goto, and a boolean to tell
that it had already been executed once. Aside from that, the body of
the loop contained only two lines that needed to be repeated (the
second time through, everything beyond those two lines would be
skipped).
One side effect of this strange loop was that a g_autofree string was
manually freed and re-initialized; I've been told that manually
freeing a g_auto_free object is highly discouraged.
This patch refactors the function to simply repeat the 2 lines that
might possibly be executed twice, thus eliminating the ugly use of
goto to construct a loop, and also takes advantage of the fact that
virPCIDriverDir() was previously returning *exactly* the same string
both times it was called to eliminate the manual VIR_FREE of drvpath.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Laine Stump [Sat, 10 Oct 2020 21:46:20 +0000 (17:46 -0400)]
util: simplify virPCIFile() and its callers
There is no need for a temporary variable in this function, and ever
since we switched to glib for memory allocation, there is no possibility
it can return NULL, so callers don't need to check for it.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Laine Stump [Thu, 1 Oct 2020 18:33:17 +0000 (14:33 -0400)]
util: simplify virHostdevPCISysfsPath()
Apparently at some point in the past, when there were multiple types
to represent PCI addresses, the function
virPCIDeviceAddressGetSysfsFile() used one of those types, while
virDomainHostDevDef used another. It's been quite awhile since we
reduced the number of different representations of PCI address, but
this function was still creating a temporary virPCIDeviceAddress, then
copying the individual elements into this temporary object from the
same type of object in the virDomainHostDevDef.
This patch just eliminates that pointless copy.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Peter Krempa <pkrempa@redhat.com>
Laine Stump [Wed, 21 Oct 2020 02:31:27 +0000 (22:31 -0400)]
util: fix very old bug/typo in virNetDevParseVfInfo()
When this function was recently changed to add in parsing of
IFLA_VF_STATS, I noticed that the checks for existence of IFLA_VF_MAC
and IFLA_VF_VLAN were looking in the *wrong array*. The array that
contains the results of parsing each IFLA_VFINFO in
tb[IFLA_VFINFO_LIST] is tb_vf, but we were checking for these in tb
(which is the array containing the results of the toplevel parsing of
the netlink message, *not* the results of parsing one of the nested
IFLA_VFINFO's.
This incorrect code has been here since the function was originally
written in 2012. It has only worked all these years due to coincidence
- the items at those indexes in tb are IFLA_ADDRESS and IFLA_BROADCAST
(of the *PF*, not of any of its VFs), and those happen to always be
present in the toplevel netlink message; since we are only looking in
the incorrect place to check for mere existence of the attribute (but
are doing the actual retrieval of the attribute from the correct
place), this bug has no real consequences other than confusing anyone
trying to understand the code.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
A binutils change has caused breakage when linking the tests
/usr/bin/ld: tests/libtest_qemu_driver.so: undefined reference to `__open_missing_mode'
This is probably a regression in binutils, so disable LTO until we get
more clarity on the root cause and whether binutils or libvirt will need
changing.
Matt Coleman [Wed, 21 Oct 2020 08:46:09 +0000 (04:46 -0400)]
hyperv: implement domainReboot and domainReset
Co-authored-by: Sri Ramanujam <sramanujam@datto.com> Signed-off-by: Matt Coleman <matt@datto.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
zhenwei pi [Thu, 15 Oct 2020 11:21:14 +0000 (19:21 +0800)]
util: support device stats collection for <interface type='hostdev'>
libvirt can retrieve traffic stats for emulated interfaces that are
backed by tap or macvtap devices, but this information wasn't
available for hostdev interfaces (those that are implemented by
assigning an SR-IOV VF device to a guest using vfio):
#virsh domifstat instance --interface=52:54:00:2d:b2:35
error: Failed to get interface stats instance 52:54:00:2d:b2:35
error: internal error: Interface name not provided
For some SR-IOV VF devices this information is available via the
netlink VFINFO_LIST request/response, and that is what this patch uses
to implement stats retrieval for VF. Not that this is dependent on
support in the PF driver - for example, the Mellanox ConnectX-4 Lx
(mlx5) driver reports usable stats, while Intel 82599 (ixgbe) and
82576 (igb) just report all stats as 0. (this is the same result as
"ip -s link show").
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Reviewed-by: Laine Stump <laine@redhat.com>
Jonathon Jongsma [Wed, 14 Oct 2020 17:08:25 +0000 (12:08 -0500)]
conf: Add support for vDPA network devices
This patch adds new schema and adds support for parsing and formatting
domain configurations that include vdpa devices.
vDPA network devices allow high-performance networking in a virtual
machine by providing a wire-speed data path. These devices require a
vendor-specific host driver but the data path follows the virtio
specification.
When a device on the host is bound to an appropriate vendor-specific
driver, it will create a chardev on the host at e.g. /dev/vhost-vdpa-0.
That chardev path can then be used to define a new interface with
type='vdpa'.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com> Reviewed-by: Laine Stump <laine@redhat.com>
meson: remove non-pkg-config fallback for devmapper
The fallback for distros which lack pkg-config support for devmapper
references an undefined variable "tmp". It appears non of our supported
build platforms are triggering this bug and so the fallback code can be
removed entirely rather than fixed.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Ján Tomko [Thu, 15 Oct 2020 12:54:39 +0000 (14:54 +0200)]
qemu: agent: fix array access
My code movement changed the type of ifaces_ret from
virDomainInterfacePtr * to virDomainInterfacePtr **,
but failed to adjust the condition or dereference the
array correctly.
Signed-off-by: Ján Tomko <jtomko@redhat.com> Fixes: 6ddb1f803ea38d8d709b984fa9539e34318a9dc0 Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 15 Oct 2020 13:06:01 +0000 (15:06 +0200)]
qemu: Prepare hostdev data which depends on the host state separately
SCSI hostdev setup requires querying the host os for the actual path of
the configured hostdev. This was historically done in the command line
formatter. Our new approach is to split out this part into
'qemuProcessPrepareHost' which is designed to be skipped in tests.
Refactor the hostdev code to use this new semantics, and add appropriate
handlers filling in the data for tests and the qemuConnectDomainXMLToNative
users.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 15 Oct 2020 13:27:30 +0000 (15:27 +0200)]
qemu: hostdev: Prepare definition bits in qemuDomainPrepareHostdev
qemuBuildHostdevSCSIAttachPrepare is supposed to prepare the data
structure used for attaching the hostdev not preparing the hostdev
definition itself. Move the corresponding bits to qemuDomainPrepareHostdev
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 15 Oct 2020 12:39:16 +0000 (14:39 +0200)]
qemuProcessCreatePretendCmd: Split up preparation and command building
Host preparation steps which are deliberately skipped when
pretend-creating a commandline are normally executed after VM object
preparation. In the test code we are faking some of the host
preparation steps, but we were doing that prior to the call to
qemuProcessPrepareDomain embedded in qemuProcessCreatePretendCmd.
By splitting up qemuProcessCreatePretendCmd into two functions we can
ensure that the ordering of the prepare steps stays consistent.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
It's not necessarily clear, why we need to create the hash table
as big as number of fields we want to store, but nevertheless,
the code can be written a bit better. The @count should be type
of size_t and could be used directly in the loop that counts the
fields.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Matt Coleman <matt@datto.com>
Michal Privoznik [Mon, 19 Oct 2020 09:55:10 +0000 (11:55 +0200)]
hyperv: Accept const @value in hypervSetEmbeddedProperty()
The hypervSetEmbeddedProperty() function is used to update a
value for given property in a list of properties created by
hypervCreateEmbeddedParam(). The list is nothing fancy - it's a
virHashTable that has NULL as dataFree callback => the table does
not own the value. This is not that obvious since
hypervSetEmbeddedProperty() accepts a non-const pointer. This
fact makes it unnecessary hard to consume, e.g. if we wanted to
pass a stack allocated string.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Matt Coleman <matt@datto.com>
Peter Krempa [Wed, 7 Oct 2020 14:52:14 +0000 (16:52 +0200)]
virschematest: Validate schema in tests/cputestdata
We now have a schema file for the 'cpu' elements. Use it to validate
files in 'tests/cputestdata'
Unfortunately the files in the directory are too disorganised and not
easy to split up to do something more straightforward.
The -baseline- input files are tested by the test internally and the
rest of the files are internal data feeding the tests so they don't
need validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Validate additional XML documents we use for internal testing.
Specifically there's a lot of them belonging to the vmx and bhyve test
suite which were not validated.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Wed, 7 Oct 2020 12:45:55 +0000 (14:45 +0200)]
nwfilterxml2xmltest: Rename cases with XMLs not conforming to schema
There's quite a few negative tests. In anticipation of schema testing of
the 'nwfilterxml2xmlin' directory rename all negative/non-conformant
XMLs with the -invalid suffix.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Wed, 7 Oct 2020 14:19:42 +0000 (16:19 +0200)]
schema: nwfiter: Allow leading/trailing whitespace in 'variable-name-type'
The reference string parser tolerates some leading/trailing whitespace
for the reference strings as witnessed by
tests/nwfilterxml2xmlin/iter-test3.xml
Allow them in the schema so that the test passes schema validation.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Wed, 7 Oct 2020 13:37:40 +0000 (15:37 +0200)]
schema: nwfilter: Allow all accepted values for 'ipsetflags'
The parser for the 'ipsetflags' accepts the 'src' and 'dst' values
stripping case. Express the same in the schema to pass validation of any
accepted string.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Tue, 6 Oct 2020 15:25:52 +0000 (17:25 +0200)]
virschematest: Add regex filtering for directory contents
In some cases we have directories with mixed XML files in the test
suite. Adding regex filtering will allow testing subsets of the XML
files against schema.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Wed, 7 Oct 2020 08:26:56 +0000 (10:26 +0200)]
virschematest: Rewrite internals to allow increasing XML test coverage
To allow greater variablitity of XML schema validation tests without
needlessly reparsing the schema we need to refactor the internals to
pass in structs rather than just paths to directory.
This allows to directly implement testing of single files and will
simplify further additions such as filtering of the list of XML files in
a directory.
The list of tested paths is directly ported for now and will be improved
in follow-up patches.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Boris Fiuczynski [Mon, 19 Oct 2020 12:23:00 +0000 (14:23 +0200)]
spec: Fix numad check
This caused
DEBUG: meson.build:2149:2: ERROR: Problem encountered: You must have numactl enabled for numad support.
on s390x.
Fixes: 974dc0a4c678af8ccb9224abecc834bb593e81fa Signed-off-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
projects / libvirt.git / log