aliguori [Sat, 23 Aug 2008 23:27:37 +0000 (23:27 +0000)]
VNC: Support for ExtendedKeyEvent client message
This patch adds support for the ExtendedKeyEvent client message. This message
allows a client to send raw scan codes directly to the server. If the client
and server are using the same keymap, then it's unnecessary to use the '-k'
option with QEMU when this extension is supported.
This is extension is currently only implemented by gtk-vnc based clients
(gvncviewer, virt-manager, vinagre, etc.).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5076 c046a42c-6fe2-441c-8c8c-71466251a162
aurel32 [Sat, 23 Aug 2008 17:22:19 +0000 (17:22 +0000)]
MIPS: don't free TCG temporary variable twice
In gen_dmtc0 function, TCG temporary variable t0 is freed at the end of
the function. Variable is freed again in the gen_dmtc0 caller.
I removed the free in gen_dmtc0, to do like in gen_dmfc0, gen_mfc0,
gen_mtc0.
aurel32 [Fri, 22 Aug 2008 09:23:06 +0000 (09:23 +0000)]
uhci: improved TD matching, working ISOC transfers
While trying to make VX-3000 camera work on XP under KVM I realized that
we do not necessarily have to find original TD address. All we care about
is the token which identifies the transfer rather well (direction, endpoint,
size, etc).
This is especially important for the isochronous transfers because otherwise
they are being canceled left and right and we do not make much progress.
With this patch all devices that used bulk transfers that I've tried so
far continue to work just as well. And now my USB web cammera (isoc transfers)
is working well tool. It's not as smooth as native Windows but it's pretty
darn smooth.
The cool thing is that new USB code (both usb-uhci and usb-linux) is totaly
generic and does not need any special logic for ISOC.
aurel32 [Fri, 22 Aug 2008 08:58:00 +0000 (08:58 +0000)]
[sh4] code translation bug fix
When a TLB miss occurs while pre-decrement store instruction such as
"mov.l Rm, @-Rn" is executed, re-execution of such instruction cause
status confusion. Because pre Rn decrement is executed before TLB miss,
re-execution decrements Rn again.
In other words, in a translated instruction array, register status
should not modified before memory access instruction.
aurel32 [Fri, 22 Aug 2008 08:57:52 +0000 (08:57 +0000)]
[sh4] MMU bug fix
Some bugs on SH4 MMU are fixed.
- When a TLB entry is overwritten or invalidated, tlb_flush_page() should be
invoked to invalidate old entry.
- When a ASID is changed, tlb_flush() should be invoke to invalidate entries
which have old ASID.
- The check for shared bit in TLB entry causes multiple TLB hit exception.
As SH3's MMU, shared bit is ignored.
- ASID is used when MMUCR's SV bit or SR's MD bit is zero.
No need to check both bits are zero.
aurel32 [Fri, 22 Aug 2008 08:57:43 +0000 (08:57 +0000)]
[sh4] memory mapped TLB entries
SH4 MMU's memory mapped TLB feature is implemented.
SH-Linux seems to write to memory mapped TLB to invalidate a TLB entry,
but does not to read it. So only memory write feature is implemented.
Work on memory read feature is left.
aurel32 [Fri, 22 Aug 2008 08:57:35 +0000 (08:57 +0000)]
[sh4] delay slot bug fix
Two bugs about delay slot handlings are fixed.
- After an exception occurred in delay slot, the branch instruction
before delay slot should be executed again. To judge such re-execution
is necessery or not, delay slot status is kept in SH4 CPU data structure.
- When a branch instruction is placed at the end of memory segment,
the delay slot is placed at the start of next memory segment.
It means delay slot comes to the start of a translation block.
In such occasion, DELAY_SLOT_CLAREME flag is used to transmit status
between translation blocks. When an exception occurs on this kind of
delay slot, DELAY_SLOT_CLEARME flag cause a status confusion in exception
handling. DELAY_SLOT_CLEARME flag should be cleared on exceptions.
aurel32 [Fri, 22 Aug 2008 08:57:09 +0000 (08:57 +0000)]
Parallel Port Direction Fix
The direction bit in the control register should not be directly
set using PPWCONTROL. The kernel gives the following debug message.
parport0 (ppdev0): use data_reverse for this!
More over setting the data pins to forward mode does not work,
perhaps a bug in the Linux PP driver. The right way to do this is
to use PPDATADIR to set the direction. The patch checks if the
user is toggling the direction bit, and invokes PPDATADIR to
do the job.
aliguori [Thu, 21 Aug 2008 22:40:00 +0000 (22:40 +0000)]
Ignore IDE command if issued while IDE is busy (Gleb Natapov)
Feature, Sector Count, LBA Low/Mid/High and Device registers should be
written only when both BSY and DRQ are cleared to zero.
Command register shall only be written when BSY and DRQ are set to zero
for all commands except DEVICE RESET.
Data Port register shall be accessed for host PIO data transfer only when
DRQ is set to one.
aliguori [Thu, 21 Aug 2008 20:08:55 +0000 (20:08 +0000)]
add DisplayState->idle (Samuel Thibault)
Add idle field to DisplayState struct, so drivers can figure
the display is idle and take advantage of that.
The xen framebuffer driver will use this to communicate the
idle state to the guest, so it knows it can stop doing updates
to a virtual display which is invisible anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5056 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Thu, 21 Aug 2008 20:08:03 +0000 (20:08 +0000)]
Handle terminating signals (Gerd Hoffmann)
This patch makes qemu handle signals better. It sets the request_shutdown
flag, making the main_loop exit and qemu taking the usual exit route, with
atexit handlers being called and so on, instead of qemu just being killed
by the signal.
To avoid calling vm_start() from the signal handler main_loop() got an
additional check so qemu_system_shutdown_request() works even when the
vm is in stopped state.
aliguori [Thu, 21 Aug 2008 19:33:09 +0000 (19:33 +0000)]
uhci: fixes for save/load-vm (Max Krasnyansky)
For some reason we were not registering save/load-vm handler for piix3
flavor of UHCI and hence save/load was broken.
Async transactions need to be canceled when we save the VM because there
is no way we can save/restore all that state. Since we do not mess the
original TD/QH the driver will simply resubmit the transfers.
Tested with Windows XP-SP2 running under QEMU/KQEMU.
Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5054 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Thu, 21 Aug 2008 19:31:10 +0000 (19:31 +0000)]
husb: rewrite Linux host USB layer, fully async operation (Max Krasnyansky)
This is a follow up to the async UHCI patch. Both BULK and ISOC transactions
are now fully asynchrounous. I left CONTROL synchronous for now, ideally
we want it to be async too and it should not be that hard to do now.
This patch obviously requires UHCI patch. The combo has been tested with
various devices. See the UHCI patch description for list of the devices.
Most of the testing was done with the KVM flavor of QEMU.
Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5051 c046a42c-6fe2-441c-8c8c-71466251a162
This is esentially a re-write of the QEMU UHCI layer. My initial goal
was to support fully async operation with multiple outstanding async
transactions. Along the way I realized that I can greatly simplify
and cleanup the overall logic. There was a lot of duplicate and confusing
code in the UHCI data structure parsing and other places.
We were actually violating UHCI spec in handling async ISOC transaction
(host controller is not supposed to write into the frame pointer).
The reason I wanted to support fully async operation is because current
synchronous version is unusable with most devices exported from host
(via usb-linux.c). Transactions take a long time and the whole VM becomes
slow as hell.
Current async support is very rudimentory and for the most part
non-functional. Single transaction at a time is simply not enough. I have
a device for which XP driver submits both IN and OUT packets at the same
time. IN packet always times out unless OUT packet makes it to the device.
Hence we must be able to process both in order for that device to work.
The new code is backwards compatible and was first tested agains original
synchronous usb-linux.c and builtin usb devices like tablet which is also
synchronous. Rewrite of the usb-linux.c is coming up next.
Async support was tested against various XP versions (ie XP, SP2, SP3) and
a bunch of different USB devices: serial port controllers, mice, keyboard,
JTAG dongles (from Xilinx and Altera).
ISOC support was only lighly tested and needs more work. It's not any worse
than current code though.
UHCI parser changes are probably somewhat hard to review without the
understanding of the UHCI spec.
The async design should be fairly easy to follow. Basically we have a list
of async objects for each pending transfer. Async objects are tagged with
the original TD (transfer descriptor) address and token. We now support
unlimited number of outstanding isoc and one outstanding bulk/intr/ctrl
transfer per QH (queue head). UHCI spec does not have a clear protocol for
the cancelation of the trasfer requests. Driver can yank out TDs on any
frame boundary. In oder to handle that I added somewhat fancy TD validation
logic logic to avoid unnecessary cancelations.
Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5050 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Thu, 21 Aug 2008 19:29:38 +0000 (19:29 +0000)]
usb: generic packet handler cleanup and documentation (Max Krasnyansky)
A bit better documentation of the USB device API, namely
return codes.
Rewrite of usb_generic_handle_packet() to make it more
reable and easier to follow.
Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5049 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Thu, 21 Aug 2008 19:28:55 +0000 (19:28 +0000)]
husb: support for USB host device auto connect (Max Krasnyansky)
QEMU can now automatically grab host USB devices that match the filter.
For now I just extended 'host:X.Y' and 'host:VID:PID' syntax to handle
wildcards. So for example if you do something like
usb_add host:5.*
QEMU will automatically grab any non-hub device with host address 5.*.
Same with the 'host:PID:*', we grab any device that matches PID.
Filtering itself is very generic so we can probably add more elaborate
syntax like 'host:BUS.ADDR:VID:PID'. So that we can do 'host:5.*:6000:*'.
Anyway, it's implemented using a periodic timer that scans host devices
and grabs those that match the filter. Timer is started when the first
filter is added.
We now keep the list of all host devices that we grabbed to make sure that
we do not grab the same device twice.
btw It's currently possible to grab the same host device more than once.
ie You can just do "usb_add host:1.1" more than once, which of course does
not work. So this patch fixes that issue too.
Along with auto disconnect patch that I send a minute ago the setup is very
seamless now. You can just allocate some usb ports to the VMs and plug/unplug
devices at any time.
Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5048 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Thu, 21 Aug 2008 19:27:48 +0000 (19:27 +0000)]
husb: support for USB host device auto disconnect (Max Krasnyansky)
I got really annoyed by the fact that you have to manually do
usb_del in the monitor when host device is unplugged and decided
to fix it :)
Basically we now automatically remove guest USB device
when the actual host device is disconnected.
At first I've extended set_fd_handlerX() stuff to support checking
for exceptions on fds. But unfortunately usbfs code does not wake up
user-space process when device is removed, which means we need a
timer to periodically check if device is still there. So I removed
fd exception stuff and implemented it with the timer.
Signed-off-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5047 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Thu, 21 Aug 2008 19:25:45 +0000 (19:25 +0000)]
Fix windows build
Right now, the Windows build is broken because of NBD. Using a mingw32 cross
compiler is also badly broken.
This patch fixes the Windows build by stubbing out NBD support until someone
fixes it for Windows. It also santizing the mingw32 cross compiler support
by replacing the --enable-mingw32 option with a compiler check to determine
if we're on windows or not.
Also remove the weird SDL pseudo-detection for mingw32 using a cross compiler.
The hardcoded sdl-config name is seemly arbitrary. If you cross compiler SDL
correctly and modify your PATH variable appropriately, it will Just Work when
cross compiling.
The audio driver detection is also broken for cross compiling so you have to
specify the audio drivers explicitly for now.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5046 c046a42c-6fe2-441c-8c8c-71466251a162
aurel32 [Thu, 21 Aug 2008 03:14:52 +0000 (03:14 +0000)]
De-assert PIC IRQs properly at APIC level
[ Taking latest isapc changes into account. ]
Ensure that PIC-delivered IRQs are properly de-asserted in case the APIC
is in EXTINT or FIXED mode (with level-triggering selected) on LINT0.
Fixes EFI-BIOS boot issues.
This patch also cleans up a bit the interface between PIC and APIC,
making apic_local_deliver private again.
aurel32 [Thu, 21 Aug 2008 03:14:41 +0000 (03:14 +0000)]
De-assert ISA PIC IRQs properly
[ Taking latest isapc changes into account. ]
In case the PIC IRQ gets de-asserted on an isapc machine, we also have
to reset CPU_INTERRUPT_HARD. This is what older qemu (before the
routing-through-APIC changes) used to do as well.
malc [Wed, 20 Aug 2008 22:39:28 +0000 (22:39 +0000)]
Kludge to support linux-user on a PPC64
Some headers (e.g. signal.h) include asm/elf.h and the chaos of macro
redefinitions ensues, this kludge avoids it.
Alternative way to fight that would be to change all ELF_XXX and some
other definitions to QEMU_ELF_XXX or something to that effect.
This patch concludes the quest for enabling linux-user on PPC64,
however, since qemu_mallocz uses mmap and, at least on this system,
mmap tends to return values that do not fit into 32bit, emulation for
32bit targets does not work without some hacks wich are to disgusting
to commit (and as `man mmap' tells us MAP_32BIT is only implemented on
X86_64)
malc [Wed, 20 Aug 2008 22:39:26 +0000 (22:39 +0000)]
Fix tswap size
p in this case is uint32_t *
e1/e2 are unsigned ints initialized from arithmetics performed on
unsigned longs
The mistake was, probably, never noticed due to the absence of any
big endian linux-user host. The types e1/e2 and p begs the quesiton
why this function takes longs at all.
aliguori [Thu, 14 Aug 2008 18:09:32 +0000 (18:09 +0000)]
Extract compressing part from alloc_cluster_offset() (Laurent Vivier)
Divide alloc_cluster_offset() into alloc_cluster_offset() and
alloc_compressed_cluster_offset().
Common parts are moved to free_any_clusters() and get_cluster_table();
aliguori [Thu, 14 Aug 2008 18:07:12 +0000 (18:07 +0000)]
qcow2: Extract code from get_cluster_offset() (Laurent Vivier)
Extract code from get_cluster_offset() into new functions:
- seek_l2_table()
Search an l2 offset in the l2_cache table.
- l2_load()
Read the l2 entry from disk
- l2_allocate()
Allocate a new l2 entry.
Some comment fixups from Kevin Wolf
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net> Signed-off-by: Kevin Wolf <kwolf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5003 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Mon, 11 Aug 2008 18:52:14 +0000 (18:52 +0000)]
IDE SEEK_STAT flag
Add SEEK_STAT in all non-error cases except sleep request, since our
seek times are virtually 0. Although this flag is deprecated by newer
ATA standards, Linux at least checks it for CD drives, and would timeout
in some case if we do not set it.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4994 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Mon, 11 Aug 2008 14:17:04 +0000 (14:17 +0000)]
Upgrade emulated UART to 16550A (Stefano Stabellini)
This patch upgrades the emulated UART to 16550A, the code comes from
xen-unstable. The main improvement was introduced with the following patch and
subsequent email thread:
- fixed a small bug handling IRQs; this was the problem that prevented
kgdb to work over the serial (thanks to Jason Wessel for the help
spotting and reproducing this bug).
- many many style fixes;
- savevm version number increased;
- not including termios.h and sys/ioctl.h anymore, declaring static
constants in qemu-char.h instead;
aliguori [Wed, 6 Aug 2008 16:55:50 +0000 (16:55 +0000)]
Fix gnutls autodetection when using a cross-compiler.
It is not enough to check for pkg-config gnutls. You may be using a
cross-compiler and have gnutls available on the host but not for the target.
This patch changes the detection to try and build an application using gnutls
and whatever compiler is available.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4989 c046a42c-6fe2-441c-8c8c-71466251a162
aliguori [Wed, 6 Aug 2008 14:11:44 +0000 (14:11 +0000)]
only check RCTL_EN in e1000_can_receive()
e1000_receive() has code to raise a receive overflow interrupt when the receive
buffer head and tail match. However, with the present implementation of
e1000_can_receive(), this code is unreachable -- and etherboot breaks as a
result.
Signed-off-by: Charles Duffy <charles_duffy@messageone.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4987 c046a42c-6fe2-441c-8c8c-71466251a162
blueswir1 [Sat, 2 Aug 2008 11:18:40 +0000 (11:18 +0000)]
Update OpenBIOS images to SVN revision 218. Changes:
r186: Revert broken r161, fix identification string printing (Igor Kovalenko)
r187: Fix NetBSD reset problem
r188: Add a TODO for Sparc
r189: Fix some Sparc32 compile warnings
r190: Fix some Sparc64 compile warnings
r191: Add prototypes for [v]snprintf
r192: Add a common header file for libgcc functions
r193: Implement obmem for NetBSD loader
r194: Add Make dependencies for some files, unify Sparc32/64 build.xml files
r195: Remove debug messages
r196: Add a.out support for SILO
r198: Add a CPU node
r199: Add (bogus) memory nodes
r200: Add idprom node
r201: Make serial console usable
r202: Add MMU node and ops
r203: Add trap table setting function to client interface
r204: Fix MMU translation
r205: Handle 32 bit windows, remove now unused files
r206: Support for simple boot device selection
r207: Fix TLB entry generation
r208: Fix printing of exception messages
r209: Set up tick_cmpr, update assembly flags
r210: Add a clock-frequency node
r211:
Fix available and total memory
Implement a static list of mmu translations
Map more pages
Add a fake unmap method
r212: Fix builtin.c dependencies
r213: Add FCode boot loader for Solaris etc.
r214: Add correct reset vectors
r215: Add T1 and T2 CPUs
r216: Fix wrong translations
r217: Add bootargs property for kernel command line
r218:
Finally fix the very obscure problem which prevented normal and especially
FCode boot: too small heap (used for Forth memory)!
Remove forced arch_init and boot hacks
aliguori [Fri, 1 Aug 2008 15:12:34 +0000 (15:12 +0000)]
Set focus to monitor to ask password if line is multiplexed (Laurent Vivier)
This patch allows to display the "Password:" prompt if we use encrypted
disk with "-nographic" option.
It also modifies management of "-nographic" to not override user's
choices for "-serial", "-parallel" and "-monitor".
When qemu has to ask a password with "-nographic" with a multiplexed
serial interface, it forces the focus to the monitor and restore
original focus after.
projects / qemu-xen.git / log