Jim Meyering [Thu, 4 Oct 2012 11:09:59 +0000 (13:09 +0200)]
libcacard/vcard_emul_nss: use pstrcpy in place of strncpy
Replace strncpy+NUL-terminate use with use of pstrcpy.
This requires linking with cutils.o (or else vssclient doesn't link),
so add that in the Makefile.
Acked-by: Alon Levy <alevy@redhat.com> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
NUL-termination of the .ifr_name field is not required, but is fine
(and preferable to using strncpy and leaving the reader to wonder),
since the first thing the linux kernel does is to clear the last byte.
Besides, using pstrcpy here makes this setting of ifr_name consistent
with the other code (e.g., net/tap-linux.c) that does the same thing.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jim Meyering [Thu, 4 Oct 2012 11:09:57 +0000 (13:09 +0200)]
vscsi: avoid unwarranted strncpy
Don't use strncpy when the source string is known to fit
in the destination buffer. Use equivalent memcpy.
We could even use strcpy, here, but some static analyzers
warn about that, so don't add new uses.
Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jim Meyering [Thu, 4 Oct 2012 11:09:56 +0000 (13:09 +0200)]
virtio-9p: avoid unwarranted uses of strncpy
In all of these cases, the uses of strncpy were unnecessary, since
at each point of use we know that the NUL-terminated source bytes
fit in the destination buffer. Use memcpy in place of strncpy.
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jim Meyering [Thu, 4 Oct 2012 11:09:55 +0000 (13:09 +0200)]
bt: replace fragile snprintf use and unwarranted strncpy
In bt_hci_name_req a failed snprintf could return len larger than
sizeof(params.name), which means the following memset call would
have a "length" value of (size_t)-1, -2, etc... Sounds scary.
But currently, one can deduce that there is no problem:
strlen(slave->lmp_name) is guaranteed to be smaller than
CHANGE_LOCAL_NAME_CP_SIZE, which is the same as sizeof(params.name),
so this cannot happen. Regardless, there is no justification for
using snprintf+memset. Use pstrcpy instead.
Also, in bt_hci_event_complete_read_local_name, use pstrcpy in place
of unwarranted strncpy.
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jim Meyering [Thu, 4 Oct 2012 11:09:54 +0000 (13:09 +0200)]
ui/vnc: simplify and avoid strncpy
Don't bother with strncpy. There's no need for its zero-fill.
Use g_strndup in place of g_malloc+strncpy+NUL-terminate.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jim Meyering [Thu, 4 Oct 2012 11:09:53 +0000 (13:09 +0200)]
linux-user: remove two unchecked uses of strdup
Remove two uses of strdup (use g_path_get_basename instead),
and add a comment that this strncpy use is ok.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jim Meyering [Thu, 4 Oct 2012 11:09:52 +0000 (13:09 +0200)]
ppc: avoid buffer overrun: use pstrcpy, not strncpy
A terminal NUL is required by caller's use of strchr.
It's better not to use strncpy at all, since there is no need
to zero out hundreds of trailing bytes for each iteration.
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jim Meyering [Thu, 4 Oct 2012 11:09:49 +0000 (13:09 +0200)]
hw/9pfs: avoid buffer overrun
v9fs_add_dir_node and qemu_v9fs_synth_add_file used strncpy
to form node->name, which requires NUL-termination, but
strncpy does not ensure NUL-termination.
Use pstrcpy, which does.
Acked-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jim Meyering [Thu, 4 Oct 2012 11:09:47 +0000 (13:09 +0200)]
sheepdog: avoid a few buffer overruns
* parse_vdiname: Use pstrcpy, not strncpy, when the destination
buffer must be NUL-terminated.
* sd_open: Likewise, avoid buffer overrun.
* do_sd_create: Likewise. Leave the preceding memset, since
pstrcpy does not NUL-fill, and filename needs that.
* sd_snapshot_create: Add a comment/question.
* find_vdi_name: Remove a useless memset.
* sd_snapshot_goto: Remove a useless memset.
Use pstrcpy to NUL-terminate, because find_vdi_name requires
that its vdi arg (filename parameter) be NUL-terminated.
It seems ok not to NUL-fill the buffer.
Do the same for snapid: remove useless memset-0 (instead,
zero tag[0]). Use pstrcpy, not strncpy.
* sd_snapshot_list: Use pstrcpy, not strncpy to write
into the ->name member. Each must be NUL-terminated.
Acked-by: Kevin Wolf <kwolf@redhat.com> Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jim Meyering [Thu, 4 Oct 2012 11:09:46 +0000 (13:09 +0200)]
block: avoid buffer overrun by using pstrcpy, not strncpy
Also, use PATH_MAX, rather than the arbitrary 1024.
Using PATH_MAX is more consistent with other filename-related
variables in this file, like backing_filename and tmp_filename.
Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Jim Meyering [Thu, 4 Oct 2012 11:09:44 +0000 (13:09 +0200)]
scsi, pci, qdev, isa-bus, sysbus: don't let *_get_fw_dev_path return NULL
Use g_strdup rather than strdup, because the sole caller
(qdev_get_fw_dev_path_helper) assumes it gets non-NULL, and dereferences
it. Besides, in that caller, the allocated buffer is already freed with
g_free, so it's better to allocate with a matching g_strdup.
In one case, (scsi-bus.c) it was trivial, so I replaced an snprintf+
g_strdup combination with an equivalent g_strdup_printf use.
Signed-off-by: Jim Meyering <meyering@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 5 Oct 2012 00:56:26 +0000 (19:56 -0500)]
Merge remote-tracking branch 'sstabellini/xen-2012-10-03' into staging
* sstabellini/xen-2012-10-03:
xen: Set the vram dirty when an error occur.
exec, memory: Call to xen_modified_memory.
exec: Introduce helper to set dirty flags.
xen: Introduce xen_modified_memory.
QMP, Introduce xen-set-global-dirty-log command.
qemu/xen: Add 64 bits big bar support on qemu
xen: Fix, no unplug of pt device by platform device.
Anthony Liguori [Fri, 5 Oct 2012 00:53:50 +0000 (19:53 -0500)]
Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (30 commits)
qemu-iotests: add tests for streaming error handling
qemu-iotests: map underscore to dash in QMP argument names
blkdebug: process all set_state rules in the old state
stream: add on-error argument
block: introduce block job error
iostatus: reorganize io error code
iostatus: change is_read to a bool
iostatus: move BlockdevOnError declaration to QAPI
iostatus: rename BlockErrorAction, BlockQMPEventAction
qemu-iotests: add test for pausing a streaming operation
qmp: add block-job-pause and block-job-resume
block: add support for job pause/resume
qmp: add 'busy' member to BlockJobInfo
block: add block_job_query
block: move job APIs to separate files
block: fix documentation of block_job_cancel_sync
qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE
qemu-iotests: add initial tests for live block commit
QAPI: add command for live block commit, 'block-commit'
block: helper function, to find the base image of a chain
...
Anthony Liguori [Fri, 5 Oct 2012 00:52:09 +0000 (19:52 -0500)]
Merge remote-tracking branch 'qmp/queue/qmp' into staging
* qmp/queue/qmp:
block: live snapshot documentation tweaks
input: index_from_key(): drop unused code
qmp: qmp_send_key(): accept key codes in hex
input: qmp_send_key(): simplify
hmp: dump-guest-memory: hardcode protocol argument to "file:"
qmp: dump-guest-memory: don't spin if non-blocking fd would block
qmp: dump-guest-memory: improve schema doc (again)
qapi: convert add_client
monitor: add Error * argument to monitor_get_fd
pci-assign: use monitor_handle_fd_param
qapi: add "unix" to the set of reserved words
qapi: do not protect enum values from namespace pollution
Add qemu-ga-client script
Support settimeout in QEMUMonitorProtocol
Make negotiation optional in QEMUMonitorProtocol
Anthony Liguori [Fri, 5 Oct 2012 00:50:33 +0000 (19:50 -0500)]
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
* mst/tags/for_anthony:
virtio-serial-bus: let chardev know the exact number of bytes requested
virtio: Introduce virtqueue_get_avail_bytes()
virtio: use unsigned int for counting bytes in vq
iov: add const annotation
virtio-net: fix used len for tx
virtio: don't mark unaccessed memory as dirty
Anthony Liguori [Fri, 5 Oct 2012 00:49:15 +0000 (19:49 -0500)]
Merge remote-tracking branch 'kraxel/usb.66' into staging
* kraxel/usb.66:
usb: Fix usb_packet_map() in the presence of IOMMUs
usb-redir: Adjust pkg-config check for usbredirparser .pc file rename (v2)
ehci: Fix interrupt packet MULT handling
xhci: create a memory region for each port
xhci: route string & usb hub support
xhci: tweak limits
compat: turn off msi/msix on xhci for old machine types
add pc-1.3 machine type
Conflicts:
hw/pc_piix.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Thu, 4 Oct 2012 10:36:04 +0000 (12:36 +0200)]
Make target_phys_addr_t 64 bits unconditionally
The hassle and compile time overhead of maintaining both 32-bit and 64-bit
capable source isn't worth the tiny performance advantage which is seen on
a minority of configurations. Switch to compiling libhw only once, with
target_phys_addr_t unconditionally typedefed to uint64_t.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony PERARD [Wed, 3 Oct 2012 13:48:45 +0000 (13:48 +0000)]
xen: Introduce xen_modified_memory.
This function is to be used during live migration. Every write access to the
guest memory should call this funcion so the Xen tools knows which pages are
dirty.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Anthony PERARD [Wed, 3 Oct 2012 13:48:19 +0000 (13:48 +0000)]
QMP, Introduce xen-set-global-dirty-log command.
This command is used during a migration of a guest under Xen. It calls
memory_global_dirty_log_start or memory_global_dirty_log_stop according to the
argument pass to the command.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Xudong Hao [Wed, 3 Oct 2012 13:46:23 +0000 (13:46 +0000)]
qemu/xen: Add 64 bits big bar support on qemu
Currently it is assumed PCI device BAR access < 4G memory. If there is such a
device whose BAR size is larger than 4G, it must access > 4G memory address.
This patch enable the 64bits big BAR support on qemu.
Anthony PERARD [Wed, 3 Oct 2012 13:45:24 +0000 (13:45 +0000)]
xen: Fix, no unplug of pt device by platform device.
The Xen platform device will unplug any NICs if requested by the guest (PVonHVM)
including a NIC that would have been passthrough. This patch makes sure that a
passthrough device will not be unplug.
Reported-by: "Zhang, Yang Z" <yang.z.zhang@intel.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Peter Maydell [Fri, 28 Sep 2012 15:17:03 +0000 (16:17 +0100)]
fpu/softfloat.c: Return correctly signed values from uint64_to_float32
The uint64_to_float32() conversion function was incorrectly always
returning numbers with the sign bit set (ie negative numbers). Correct
this so we return positive numbers instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Peter Maydell [Mon, 24 Sep 2012 16:28:35 +0000 (17:28 +0100)]
fpu/softfloat.c: Remove pointless shift of always-zero value
In float16_to_float32, when returning an infinity, just pass zero
as the mantissa argument to packFloat32(), rather than shifting
a value which we know must be zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Anthony Liguori [Mon, 1 Oct 2012 18:40:15 +0000 (13:40 -0500)]
vfio_pci: fix build on 32-bit systems
We cannot cast directly from pointer to uint64.
Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Alex Barcelo <abarcelo@ac.upc.edu> Reported-by: Alex Barcelo <abarcelo@ac.upc.edu> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alex Williamson [Wed, 26 Sep 2012 17:19:39 +0000 (11:19 -0600)]
vfio: Enable vfio-pci and mark supported
Enabled for all softmmu guests supporting PCI on Linux hosts. Note
that currently only x86 hosts have the kernel side VFIO IOMMU support
for this. PPC (g3beige) is the only non-x86 guest known to work.
ARM (veratile) hangs in firmware, others untested.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alex Williamson [Wed, 26 Sep 2012 17:19:32 +0000 (11:19 -0600)]
vfio: vfio-pci device assignment driver
This adds the core of the QEMU VFIO-based PCI device assignment driver.
To make use of this driver, enable CONFIG_VFIO, CONFIG_VFIO_IOMMU_TYPE1,
and CONFIG_VFIO_PCI in your host Linux kernel config. Load the vfio-pci
module. To assign device 0000:05:00.0 to a guest, do the following:
for dev in $(ls /sys/bus/pci/devices/0000:05:00.0/iommu_group/devices); do
vendor=$(cat /sys/bus/pci/devices/$dev/vendor)
device=$(cat /sys/bus/pci/devices/$dev/device)
if [ -e /sys/bus/pci/devices/$dev/driver ]; then
echo $dev > /sys/bus/pci/devices/$dev/driver/unbind
fi
echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id
done
See Documentation/vfio.txt in the Linux kernel tree for further
description of IOMMU groups and VFIO.
Then launch qemu including the option:
-device vfio-pci,host=0000:05:00.0
Legacy PCI interrupts (INTx) currently makes use of a kludge where we
trap BAR accesses and assume the access is in response to an interrupt,
therefore de-asserting and unmasking the interrupt. It's not quite as
targetted as using the EOI for this, but it's self contained and seems
to work across all architectures. The side-effect is a significant
performance slow-down for device in INTx mode. Some devices, like
graphics cards, don't really use their interrupt, so this can be turned
off with the x-intx=off option, which disables INTx alltogether. This
should be considered an experimental option until we refine this code.
Both MSI and MSI-X are supported and avoid these issues.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alex Williamson [Wed, 26 Sep 2012 17:19:18 +0000 (11:19 -0600)]
Update kernel header script to include vfio
Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
H. Peter Anvin [Wed, 26 Sep 2012 20:18:43 +0000 (13:18 -0700)]
x86: Implement SMEP and SMAP
This patch implements Supervisor Mode Execution Prevention (SMEP) and
Supervisor Mode Access Prevention (SMAP) for x86. The purpose of the
patch, obviously, is to help kernel developers debug the support for
those features.
A fair bit of the code relates to the handling of CPUID features. The
CPUID code probably would get greatly simplified if all the feature
bit words were unified into a single vector object, but in the
interest of producing a minimal patch for SMEP/SMAP, and because I had
very limited time for this project, I followed the existing style.
[ v2: don't change the definition of the qemu64 CPU shorthand, since
that breaks loading old snapshots. Per Anthony Liguori this can be
fixed once the CPU feature set is snapshot.
Change the coding style slightly to conform to checkpatch.pl. ]
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
i386: -cpu help: remove reference to specific CPUID leaves/registers
The -cpu configuration interface is based on a list of feature names or
properties, on a single namespace, so there's no need to mention on
which CPUID leaf/register each flag is located.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Don Slutz <Don@CloudSwitch.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instead of having duplicate feature names on the ext2_feature array for
the AMD feature bit aliases, we keep the feature names only on the
feature_name[] array, and copy the corresponding bits to
cpuid_ext2_features in case the CPU vendor is AMD.
This will:
- Make sure we don't set the feature bit aliases on Intel CPUs;
- Make it easier to convert feature bits to CPU properties, as now we
have a single bit on the x86_def_t struct for each CPU feature.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Don Slutz <Don@CloudSwitch.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
i386: kvm: use a #define for the set of alias feature bits
Instea of using a hardcoded hex constant, define CPUID_EXT2_AMD_ALIASES
as the set of CPUID[8000_0001].EDX bits that on AMD are the same as the
bits of CPUID[1].EDX.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Don Slutz <Don@CloudSwitch.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Paolo Bonzini [Fri, 28 Sep 2012 15:23:02 +0000 (17:23 +0200)]
qemu-iotests: add tests for streaming error handling
Add a test for each of report/ignore/stop. The tests use blkdebug
to generate an error in the middle of a script. The error is
recoverable (once = "on") so that we can test resuming a job after
stopping for an error.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 28 Sep 2012 15:23:01 +0000 (17:23 +0200)]
qemu-iotests: map underscore to dash in QMP argument names
iotests.py provides a convenience function that uses Python keyword
arguments to represent QMP command arguments. However, almost all
QMP commands use dashes for argument names (the sole exception is
block_set_io_throttle), and dashes are not allowed in a keyword
argument name. Hence provide automatic conversion of underscores
to dashes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 28 Sep 2012 15:23:00 +0000 (17:23 +0200)]
blkdebug: process all set_state rules in the old state
Currently it is impossible to write a blkdebug script that ping-pongs
between two states, because the second set-state rule will use the
state that is set in the first. If you have
[set-state]
event = "..."
state = "1"
new_state = "2"
[set-state]
event = "..."
state = "2"
new_state = "1"
for example the state will remain locked at 1. This can be fixed
by first processing all rules, and then setting the state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 28 Sep 2012 15:22:58 +0000 (17:22 +0200)]
block: introduce block job error
The following behaviors are possible:
'report': The behavior is the same as in 1.1. An I/O error,
respectively during a read or a write, will complete the job immediately
with an error code.
'ignore': An I/O error, respectively during a read or a write, will be
ignored. For streaming, the job will complete with an error and the
backing file will be left in place. For mirroring, the sector will be
marked again as dirty and re-examined later.
'stop': The job will be paused and the job iostatus will be set to
failed or nospace, while the VM will keep running. This can only be
specified if the block device has rerror=stop and werror=stop or enospc.
'enospc': Behaves as 'stop' for ENOSPC errors, 'report' for others.
In all cases, even for 'report', the I/O error is reported as a QMP
event BLOCK_JOB_ERROR, with the same arguments as BLOCK_IO_ERROR.
It is possible that while stopping the VM a BLOCK_IO_ERROR event will be
reported and will clobber the event from BLOCK_JOB_ERROR, or vice versa.
This is not really avoidable since stopping the VM completes all pending
I/O requests. In fact, it is already possible now that a series of
BLOCK_IO_ERROR events are reported with rerror=stop, because vm_stop
calls bdrv_drain_all and this can generate further errors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 28 Sep 2012 15:22:57 +0000 (17:22 +0200)]
iostatus: reorganize io error code
Move the common part of IDE/SCSI/virtio error handling to the block
layer. The new function bdrv_error_action subsumes all three of
bdrv_emit_qmp_error_event, vm_stop, bdrv_iostatus_set_err.
The same scheme will be used for errors in block jobs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We want to remove knowledge of BLOCK_ERR_STOP_ENOSPC from drivers;
drivers should only be told whether to stop/report/ignore the error.
On the other hand, we want to keep using the nicer BlockErrorAction
name in the drivers. So rename the enums, while leaving aside the
names of the enum values for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 28 Sep 2012 15:22:52 +0000 (17:22 +0200)]
qemu-iotests: add test for pausing a streaming operation
These check that a paused streaming job does not advance its offset.
Sometimes the new test fails; the map is different between the source
and the destination of the streaming because qemu-io does not always
pack adjacent clusters that have the same allocated/unallocated state.
However, this also happens with the existing test_stream testcase, and
is better fixed in qemu-io.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 28 Sep 2012 15:22:51 +0000 (17:22 +0200)]
qmp: add block-job-pause and block-job-resume
Add QMP commands matching the functionality.
Paused jobs cannot be canceled without first resuming them. This
ensures that I/O errors are never missed by management. However, an
optional force argument can be specified to allow that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 28 Sep 2012 15:22:50 +0000 (17:22 +0200)]
block: add support for job pause/resume
Job pausing reuses the existing support for cancellable sleeps. A pause
happens at the next sleeping point and lasts until the coroutine is
re-entered explicitly. Cancellation was already doing a forced resume,
so implement it explicitly in terms of resume.
Paused jobs cannot be canceled without first resuming them. This ensures
that I/O errors are never missed by management.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Fri, 28 Sep 2012 15:22:49 +0000 (17:22 +0200)]
qmp: add 'busy' member to BlockJobInfo
Because pausing a job is asynchronous, we need to know whether it has
completed. This is described by the "busy" field of BlockJob; copy it
to BlockJobInfo.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jeff Cody [Thu, 27 Sep 2012 17:29:17 +0000 (13:29 -0400)]
qemu-iotests: add initial tests for live block commit
Derived from the streaming test cases (030), this adds the
following 9 tests:
1. For the following image chain, commit [mid] into [backing],
and use qemu-io to verify [backing] has its original data, as
well as the data from [mid]
[backing] <-- [mid] <-- [test]
2. Verifies that 'block-commit' with the 'speed' parameter sets the
speed parameter, as reported by 'query-block-jobs'
3. Verifies that a bogus 'device' parameter to 'block-commit'
results in error
4-9: Appropriate error values returned for the following argument errors:
* top == base
* top is nonexistent
* base is nonexistent
* top == active layer (this is currently not supported)
* top and base arguments are reversed
* top argument is omitted
Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jeff Cody [Thu, 27 Sep 2012 17:29:16 +0000 (13:29 -0400)]
QAPI: add command for live block commit, 'block-commit'
The command for live block commit is added, which has the following
arguments:
device: the block device to perform the commit on (mandatory)
base: the base image to commit into; optional (if not specified,
it is the underlying original image)
top: the top image of the commit - all data from inside top down
to base will be committed into base (mandatory for now; see
note, below)
speed: maximum speed, in bytes/sec
Note: Eventually this command will support merging down the active layer,
but that code is not yet complete. If the active layer is passed
in as top, then an error will be returned. Once merging down the
active layer is supported, the 'top' argument may become optional,
and default to the active layer.
The is done as a block job, so upon completion a BLOCK_JOB_COMPLETED will
be emitted.
Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jeff Cody [Thu, 27 Sep 2012 17:29:13 +0000 (13:29 -0400)]
block: add live block commit functionality
This adds the live commit coroutine. This iteration focuses on the
commit only below the active layer, and not the active layer itself.
The behaviour is similar to block streaming; the sectors are walked
through, and anything that exists above 'base' is committed back down
into base. At the end, intermediate images are deleted, and the
chain stitched together. Images are restored to their original open
flags upon completion.
Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jeff Cody [Thu, 27 Sep 2012 17:29:12 +0000 (13:29 -0400)]
block: add support functions for live commit, to find and delete images.
Add bdrv_find_overlay(), and bdrv_drop_intermediate().
bdrv_find_overlay(): given 'bs' and the active (topmost) BDS of an image chain,
find the image that is the immediate top of 'bs'
bdrv_drop_intermediate():
Given 3 BDS (active, top, base), drop images above
base up to and including top, and set base to be the
backing file of top's overlay node.
E.g., this converts:
bottom <- base <- intermediate <- top <- active
to
bottom <- base <- active
Signed-off-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds gluster as the new block backend in QEMU. This gives
QEMU the ability to boot VM images from gluster volumes. Its already
possible to boot from VM images on gluster volumes using FUSE mount, but
this patchset provides the ability to boot VM images from gluster volumes
by by-passing the FUSE layer in gluster. This is made possible by
using libgfapi routines to perform IO on gluster volumes directly.
VM Image on gluster volume is specified like this:
'transport' specifies the transport type used to connect to gluster
management daemon (glusterd). Valid transport types are
tcp, unix and rdma. If a transport type isn't specified, then tcp
type is assumed.
'server' specifies the server where the volume file specification for
the given volume resides. This can be either hostname, ipv4 address
or ipv6 address. ipv6 address needs to be within square brackets [ ].
If transport type is 'unix', then 'server' field should not be specifed.
The 'socket' field needs to be populated with the path to unix domain
socket.
'port' is the port number on which glusterd is listening. This is optional
and if not specified, QEMU will send 0 which will make gluster to use the
default port. If the transport type is unix, then 'port' should not be
specified.
'volname' is the name of the gluster volume which contains the VM image.
'image' is the path to the actual VM image that resides on gluster volume.
Paolo Bonzini [Thu, 27 Sep 2012 13:57:43 +0000 (19:27 +0530)]
aio: Another fix to the walking_handlers logic
The AIO dispatch loop will call QLIST_REMOVE and g_free even if there
are other pending calls to qemu_aio_wait outside the current one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 24 Sep 2012 09:12:02 +0000 (14:42 +0530)]
qemu: URI parsing library
Add a new URI parsing library to QEMU. The code has been borrowed from
libxml2 and libvirt.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Mon, 24 Sep 2012 09:10:56 +0000 (14:40 +0530)]
aio: Fix qemu_aio_wait() to maintain correct walking_handlers count
Fix qemu_aio_wait() to ensure that registered aio handlers don't get
deleted when they are still active. This is ensured by maintaning the
right count of walking_handlers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Jeff Cody [Tue, 25 Sep 2012 16:29:39 +0000 (12:29 -0400)]
block: after creating a live snapshot, make old image read-only
Currently, after a live snapshot of a drive, the image that has
been 'demoted' to be below the new active layer remains r/w.
This patch reopens it read-only.
Note that we do not check for error on the reopen(), because we
will not abort the snapshots if the reopen fails.
This patch depends on the bdrv_reopen() series.
Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Kevin Wolf [Tue, 25 Sep 2012 13:47:36 +0000 (15:47 +0200)]
block-migration: Flush requests in blk_mig_cleanup
When cancelling block migration, all in-flight requests of the block
migration must be completed before the data can be freed. This was
visible as failing assertions and segfaults.
Reported-by: Peter Lieven <pl@dlhnet.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Amit Shah [Mon, 24 Sep 2012 18:35:16 +0000 (00:05 +0530)]
virtio-serial-bus: let chardev know the exact number of bytes requested
Using the virtqueue_avail_bytes() function had an unnecessarily
crippling effect on the number of bytes needed by the guest as reported
to the chardev layer in the can_read() callback.
Using the new virtqueue_get_avail_bytes() function will let us advertise
the exact number of bytes we can send to the guest.
Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Amit Shah [Mon, 24 Sep 2012 18:35:15 +0000 (00:05 +0530)]
virtio: Introduce virtqueue_get_avail_bytes()
The current virtqueue_avail_bytes() is oddly named, and checks if a
particular number of bytes are available in a vq. A better API is to
fetch the number of bytes available in the vq, and let the caller do
what's interesting with the numbers.
Introduce virtqueue_get_avail_bytes(), which returns the number of bytes
for buffers marked for both, in as well as out. virtqueue_avail_bytes()
is made a wrapper over this new function.
Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
offset of accessed buffer is calculated using iov_length, so it
can exceed accessed len. If that happens
math in len - offset wraps around, and size becomes wrong.
As real value is 0, so this is harmless but unnecessary.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Merge branch 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm
* 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
Versatile Express: Add modelling of NOR flash
Versatile Express: Fix NOR flash 0 address and remove flash alias
hw/armv7m_nvic: Correctly register GIC region when setting up NVIC
pl190: fix read of VECTADDR
The blank lines inside the single dump make it difficult for the
eye to pick out the block. Worse, with interior newlines, but
no blank line following, the PSW line appears to belong to the
next dump block.
Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The current code duplicates the QKeyCodeList keys in order to store
the key values for release_keys() late run. This is a bit complicated
though, as we have to care about correct ordering and then release_keys()
will have to index key_defs[] over again.
Switch to an array of integers, which is dynamically allocated and stores
the already converted key value.
This simplifies the current code and the next commit.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
qmp: dump-guest-memory: don't spin if non-blocking fd would block
fd_write_vmcore() will indefinitely spin for a non-blocking
file-descriptor that would block. However, if the fd is non-blocking,
how does it make sense to spin?
Change this behavior to return an error instead.
Note that this can only happen with an fd provided by a management
application. The fd opened internally by dump-guest-memory is blocking.
While there, also fix 'writen_size' variable name.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
Francesco Lavra [Wed, 19 Sep 2012 05:57:21 +0000 (05:57 +0000)]
Versatile Express: Add modelling of NOR flash
This patch adds modelling of the two NOR flash banks found on the
Versatile Express motherboard. Tested with U-Boot running on an emulated
Versatile Express, with either A9 or A15 CoreTile.
Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Francesco Lavra [Wed, 19 Sep 2012 05:51:58 +0000 (05:51 +0000)]
Versatile Express: Fix NOR flash 0 address and remove flash alias
In the A series memory map (implemented in the Cortex A15 CoreTile), the
first NOR flash bank (flash 0) is mapped to address 0x08000000, while
address 0x00000000 can be configured as alias to either the first or the
second flash bank. This patch fixes the definition of flash 0 address,
and for simplicity removes the alias definition.
Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
projects / qemu-upstream-4.4-testing.git / log