Mathieu Sonet [Fri, 28 Oct 2011 09:55:37 +0000 (10:55 +0100)]
Add AACI audio playback support to the ARM Versatile/PB platform
This driver emulates the ARM AACI interface (PL041) connected to a LM4549 codec.
It enables audio playback for the Versatile/PB platform.
Limitations:
- Supports only a playback on one channel (Versatile/Vexpress)
- Supports only one TX FIFO in compact-mode or non-compact mode.
- Supports playback of 12, 16, 18 and 20 bits samples.
- Record is not supported.
- The PL041 is hardwired to a LM4549 codec.
Versatile/PB test build:
linux-2.6.38.5
buildroot-2010.11
alsa-lib-1.0.22
alsa-utils-1.0.22
mpg123-0.66
Qemu host: Ubuntu 10.04 in Vmware/OS X
Playback tested successfully with speaker-test/aplay/mpg123.
Signed-off-by: Mathieu Sonet <contact@elasticsheep.com>
[Peter Maydell: fixed typo in code clearing SL1RXBUSY/SL2RXBUSY
bits, as spotted by Andrzej Zaborowski] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
this patch fix multiple issues with VirtFS tracing.
a) Add tracepoint to the correct code path. We handle error in complete_pdu
b) Fix indentation in python script
c) Fix variable naming issue in python script
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
David Gibson [Thu, 20 Oct 2011 00:41:01 +0000 (11:41 +1100)]
Add linux-headers/asm to .gitignore
linux-headers/asm is a symlink generated during configure. It should not,
therefore be committed to git, nor show up in git diffs and the like.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Luiz Capitulino [Fri, 21 Oct 2011 18:05:43 +0000 (16:05 -0200)]
Drop qemu-objects.h from modules that don't require it
Previous commits dropped most qobjects usage from qemu modules
(now they are a low level interface used by the QAPI). However,
some modules still include the qemu-objects.h header file.
This commit drops qemu-objects.h from some of those modules
and includes qjson.h instead, which is what they actually need.
Luiz Capitulino [Fri, 21 Oct 2011 18:15:31 +0000 (16:15 -0200)]
QMP: Drop the query commands dispatch table
Because QMP development originated in the monitor, it has
inherited the monitor's distinction between query- and
non-query commands.
However, previous commits unified both commands and the
distinction is gone. This commit drops the query commands
dispatch table and does some simplifications along the way.
Luiz Capitulino [Fri, 21 Oct 2011 16:15:33 +0000 (14:15 -0200)]
qapi: Convert query-pci
This also fixes a bug with the old version: QMP would invert device id
and vendor id. This would look ok on HMP because it was printing
"device:vendor" instead of "vendor:device".
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Luiz Capitulino [Fri, 21 Oct 2011 13:41:37 +0000 (11:41 -0200)]
qapi: Convert query-balloon
Please, note that some of the code supporting memory statistics is
still around (eg. virtio_balloon_receive_stats() and reset_stats()).
Also, the qmp_query_balloon() function is synchronous and thus doesn't
make any use of the (not fully working) monitor's asynchronous command
support (the old non-qapi implementation did).
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Luiz Capitulino [Mon, 17 Oct 2011 18:41:22 +0000 (16:41 -0200)]
qapi: Convert query-vnc
There are three important remarks in relation to the non-qapi command:
1. This commit also fixes the behavior of the 'query-vnc' and 'info vnc'
commands to return an error when qemu is built without VNC support
(ie. --disable-vnc). The non-qapi command would return the OK
response in QMP and no response in HMP
2. The qapi version explicitly marks the fields 'host', 'family',
'service' and 'auth' as optional. Their are not documented as optional
in the non-qapi command doc, but they would not be returned if
vnc support is disabled. The qapi version maintains the same
semantics, but documents those fields correctly
3. The 'clients' field, which is a list, is marked as optional but is
always returned. If there are no clients connected an empty list
is returned. This is not the Right Way to this in the qapi but it's
how the non-qapi command used to work
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
While ALIGNADDR was implemented out-of-line, ALIGNADDRL was not
implemeneted at all. However, this is a very simple operation
so we're better off doing this inline.
Signed-off-by: Richard Henderson <rth@twiddle.net>
target-sparc: Do exceptions management fully inside the helpers.
This reduces the size of the individual translation blocks, since
we only emit a single call for each FOP rather than three. In
addition, clear_float_exceptions expands inline to a single byte store.
Signed-off-by: Richard Henderson <rth@twiddle.net>
target-sparc: Change fpr representation to doubles.
This allows a more efficient representation for 64-bit hosts.
It should be about the same for 32-bit hosts, as we can still
access the individual pieces of the double.
Signed-off-by: Richard Henderson <rth@twiddle.net>
target-sparc: Add accessors for double-precision fpr access.
Begin using i64 quantities to manipulate double-precision values.
On a 64-bit host this will, for the moment, generate less efficient
code; on a 32-bit host code quality should be largely unchanged.
Code quality for 64-bit will be adjusted with a subsequent patch.
Signed-off-by: Richard Henderson <rth@twiddle.net>
target-sparc: Add accessors for single-precision fpr access.
Load, store, and "create destination". This version attempts to
change the behaviour of the translator as little as possible. We
previously used cpu_tmp32 as the temporary destination, and we
continue to use that. This will eventually allow a change in
representation of the fprs.
Change the name of the cpu_fpr array to make certain that all
instances are converted.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Blue Swirl [Mon, 1 Aug 2011 09:20:58 +0000 (09:20 +0000)]
Sparc: avoid AREG0 for softint op helpers and Leon cache control
Make softint op helpers and Leon cache irq manager take a parameter
for CPUState instead of relying on global env. Move the functions
to int{32,64}_helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gerd Hoffmann [Fri, 21 Oct 2011 13:56:21 +0000 (15:56 +0200)]
spice: fix file handle cleanup
Setting both read and write handlers to NULL in qemu_set_fd_handler
is not enougth to make qemu purge the file handle from the list.
We must set opaque to NULL too.
Alon Levy [Sun, 23 Oct 2011 15:03:52 +0000 (17:03 +0200)]
qxl: reset update_surface
update init_qxl_ram to reset update_surface to 0. This fixes one case
of breakage when installing an old driver in a vm that had a new driver
installed. The newer driver would know about surface creation and would
change update_surface to !=0, then a reset would happen, all surfaces
are destroyed, then the old driver is initialized and issues an
UPDATE_AREA, and spice server aborts on invalid surface.
RHBZ: 690427
Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Yonit Halperin [Tue, 18 Oct 2011 16:58:54 +0000 (18:58 +0200)]
qxl: fix guest cursor tracking
(1) If the guest cursor command is empty, don't reload it after migration.
(2) Cleaning the guest cursor when it is released by
the spice server. In addition, explicitly reset the
cursor in spice upon destroying the primary surface
(was done by spice-server implicitly). This will prevent
access to pci memory that was released.
Yonit Halperin [Mon, 17 Oct 2011 08:03:18 +0000 (10:03 +0200)]
spice: turn client_migrate_info to async
RHBZ 737921
Spice client is required to connect to the migration target before/as migration
starts. Since after migration starts, the target qemu is blocked and cannot accept new spice client
we trigger the connection to the target upon client_migrate_info command.
client_migrate_info completion cb will be called after spice client has been
connected to the target (or a timeout). See following patches and spice patches.
Avi Kivity [Tue, 4 Oct 2011 14:26:35 +0000 (16:26 +0200)]
i386: wire up MSR_IA32_MISC_ENABLE
It's needed for its default value - bit 0 specifies that "rep movs" is
good enough for memcpy, and Linux may use a slower memcpu if it is not set,
depending on cpu family/model.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
mmio callbacks invoked by kvm_flush_coalesced_mmio_buffer() may
themselves indirectly call kvm_flush_coalesced_mmio_buffer().
Prevent reentering the function by checking a flag that indicates
we're processing coalesced mmio requests.
projects / qemu-upstream-4.5-testing.git / log