Gonglei [Wed, 20 Aug 2014 05:52:30 +0000 (13:52 +0800)]
pcihp: fix possible array out of bounds
Prevent out-of-bounds array access on
acpi_pcihp_pci_status.
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Gerd Hoffmann [Mon, 6 Oct 2014 09:42:34 +0000 (11:42 +0200)]
vmware-vga: CVE-2014-3689: turn off hw accel
Quick & easy stopgap for CVE-2014-3689: We just compile out the
hardware acceleration functions which lack sanity checks. Thankfully
we have capability bits for them (SVGA_CAP_RECT_COPY and
SVGA_CAP_RECT_FILL), so guests should deal just fine, in theory.
Subsequent patches will add the missing checks and re-enable the
hardware acceleration emulation.
Cc: qemu-stable@nongnu.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Don Koch <dkoch@verizon.com>
Petr Matousek [Thu, 18 Sep 2014 06:35:37 +0000 (08:35 +0200)]
slirp: udp: fix NULL pointer dereference because of uninitialized socket
When guest sends udp packet with source port and source addr 0,
uninitialized socket is picked up when looking for matching and already
created udp sockets, and later passed to sosendto() where NULL pointer
dereference is hit during so->slirp->vnetwork_mask.s_addr access.
Fix this by checking that the socket is not just a socket stub.
This is CVE-2014-3640.
Signed-off-by: Petr Matousek <pmatouse@redhat.com> Reported-by: Xavier Mehrenberger <xavier.mehrenberger@airbus.com> Reported-by: Stephane Duverger <stephane.duverger@eads.net> Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 20140918063537.GX9321@dhcp-25-225.brq.redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Related spice-only bug. We have a fixed 16 MB buffer here, being
presented to the spice-server as qxl video memory in case spice is
used with a non-qxl card. It's also used with qxl in vga mode.
When using display resolutions requiring more than 16 MB of memory we
are going to overflow that buffer. In theory the guest can write,
indirectly via spice-server. The spice-server clears the memory after
setting a new video mode though, triggering a segfault in the overflow
case, so qemu crashes before the guest has a chance to do something
evil.
Fix that by switching to dynamic allocation for the buffer.
Gerd Hoffmann [Tue, 26 Aug 2014 13:35:23 +0000 (15:35 +0200)]
vbe: rework sanity checks
Plug a bunch of holes in the bochs dispi interface parameter checking.
Add a function doing verification on all registers. Call that
unconditionally on every register write. That way we should catch
everything, even changing one register affecting the valid range of
another register.
Some of the holes have been added by commit e9c6149f6ae6873f14a12eea554925b6aa4c4dec. Before that commit the
maximum possible framebuffer (VBE_DISPI_MAX_XRES * VBE_DISPI_MAX_YRES *
32 bpp) has been smaller than the qemu vga memory (8MB) and the checking
for VBE_DISPI_MAX_XRES + VBE_DISPI_MAX_YRES + VBE_DISPI_MAX_BPP was ok.
Some of the holes have been there forever, such as
VBE_DISPI_INDEX_X_OFFSET and VBE_DISPI_INDEX_Y_OFFSET register writes
lacking any verification.
Security impact:
(1) Guest can make the ui (gtk/vnc/...) use memory rages outside the vga
frame buffer as source -> host memory leak. Memory isn't leaked to
the guest but to the vnc client though.
(2) Qemu will segfault in case the memory range happens to include
unmapped areas -> Guest can DoS itself.
The guest can not modify host memory, so I don't think this can be used
by the guest to escape.
Correct post load checks:
1. dev->setup_len == sizeof(dev->data_buf)
seems fine, no need to fail migration
2. When state is DATA, passing index > len
will cause memcpy with negative length,
resulting in heap overflow
First of the issues was reported by dgilbert.
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Paolo Bonzini [Fri, 4 Jul 2014 09:43:49 +0000 (11:43 +0200)]
virtio-pci: fix MSI memory region use after free
After memory region QOMification QEMU is stricter in detecting
wrong usage of the memory region API. Here it detected a
memory_region_destroy done before the corresponding
memory_region_del_subregion; the memory_region_destroy is
done by msix_uninit_exclusive_bar, the memory_region_del_subregion
is done by the PCI core's pci_unregister_io_regions before
pc->exit is called.
The problem was introduced by
commit 06a1307379fcd6c551185ad87679cd7ed896b9ea
virtio-pci: add device_unplugged callback
As noted in that commit log, virtio device kick callbacks need to be
stopped before generic virtio is cleaned up. This is because these are
notifications from pci proxy to the generic virtio device so they need
to be stopped in the unplug call before the virtio device is unrealized.
However interrupts are notifications from the virtio device to
the pci proxy so they need to stay around while the device
is realized.
The memory API misuse caused an assertion when hot-unplugging virtio
devices. Using the API correctly fixes the assertion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jason Wang [Thu, 27 Nov 2014 10:04:03 +0000 (18:04 +0800)]
virtio-net: fix unmap leak
virtio_net_handle_ctrl() and other functions that process control vq
request call iov_discard_front() which will shorten the iov. This will
lead unmapping in virtqueue_push() leaks mapping.
Fixes this by keeping the original iov untouched and using a temp variable
in those functions.
Igor Mammedov [Fri, 14 Nov 2014 11:11:44 +0000 (11:11 +0000)]
pc: piix4_pm: init legacy PCI hotplug when running on Xen
If user starts QEMU with "-machine pc,accel=xen", then
compat property in xenfv won't work and it would cause error:
"Unsupported bus. Bus doesn't have property 'acpi-pcihp-bsel' set"
when PCI device is added with -device on QEMU CLI.
From: Igor Mammedov <imammedo@redhat.com>
In case of Xen instead of using compat property, just use the fact
that xen doesn't use QEMU's fw_cfg/acpi tables to switch piix4_pm
into legacy PCI hotplug mode when Xen is enabled.
Roger Pau Monne [Thu, 13 Nov 2014 17:42:09 +0000 (18:42 +0100)]
xen_disk: fix unmapping of persistent grants
This patch fixes two issues with persistent grants and the disk PV backend
(Qdisk):
- Keep track of memory regions where persistent grants have been mapped
since we need to unmap them as a whole. It is not possible to unmap a
single grant if it has been batch-mapped. A new check has also been added
to make sure persistent grants are only used if the whole mapped region
can be persistently mapped in the batch_maps case.
- Unmap persistent grants before switching to the closed state, so the
frontend can also free them.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reported-by: George Dunlap <george.dunlap@eu.citrix.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: George Dunlap <george.dunlap@eu.citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Roger Pau Monne [Tue, 21 Oct 2014 14:03:03 +0000 (16:03 +0200)]
block: char devices on FreeBSD are not behind a pager
Introduce a new flag to mark devices that require requests to be aligned and
replace the usage of BDRV_O_NOCACHE and O_DIRECT with this flag when
appropriate.
If a character device is used as a backend on a FreeBSD host set this flag
unconditionally.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Roger Pau Monne [Fri, 23 May 2014 15:57:49 +0000 (17:57 +0200)]
serial: poll the serial console with G_IO_HUP
On FreeBSD polling a master pty while the other end is not connected
with G_IO_OUT only results in an endless wait. This is different from
the Linux behaviour, that returns immediately. In order to demonstrate
this, I have the following example code:
http://xenbits.xen.org/people/royger/test_poll.c
When executed on Linux:
$ ./test_poll
In callback
On FreeBSD instead, the callback never gets called:
$ ./test_poll
So, in order to workaround this, poll the source with G_IO_HUP (which
makes the code behave the same way on both Linux and FreeBSD).
Kevin Wolf [Tue, 1 Jul 2014 14:52:21 +0000 (16:52 +0200)]
mirror: Fix qiov size for short requests
When mirroring an image of a size that is not a multiple of the
mirror job granularity, the last request would have the right nb_sectors
argument, but a qiov that is rounded up to the next multiple of the
granularity. Don't do this.
This fixes a segfault that is caused by raw-posix being confused by this
and allocating a buffer with request length, but operating on it with
qiov length.
[s/Driver/Drive/ in qemu-iotests 041 as suggested by Eric
--Stefan]
Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 5a0f6fd5c84573387056e0464a7fc0c6fb70b2dc)
Conflicts:
tests/qemu-iotests/041.out
*updated 041.out to reflect tests missing from 2.0
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Fam Zheng [Tue, 24 Jun 2014 12:26:38 +0000 (20:26 +0800)]
qemu-iotests: Test 0-length image for mirror
All behavior and invariant should hold for images with 0 length, so
add a class to repeat all the tests in TestSingleDrive.
Hide two unapplicable test methods that would fail with 0 image length
because it's also used as cluster size.
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 3b9f27d2b34cb8c5cc6cec993712c7e1943e9de9) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Jeff Cody [Mon, 30 Jun 2014 13:14:15 +0000 (15:14 +0200)]
block: make 'top' argument to block-commit optional
Now that active layer block-commit is supported, the 'top' argument
no longer needs to be mandatory.
Change it to optional, with the default being the active layer in the
device chain.
[kwolf: Rebased and resolved conflict in tests/qemu-iotests/040]
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Jeff Cody <jcody@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
(cherry picked from commit 7676e2c597000eff3a7233b40cca768b358f9bc9)
Fam Zheng [Tue, 24 Jun 2014 12:26:37 +0000 (20:26 +0800)]
qemu-iotests: Test BLOCK_JOB_READY event for 0Kb image active commit
There should be a BLOCK_JOB_READY event with active commit, regardless
of image length. Let's test the 0 length image case, and make sure it
goes through the ready->complete process.
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 8b9a30ca5bc10545637429486836f3c206c39fab) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Fam Zheng [Tue, 24 Jun 2014 12:26:36 +0000 (20:26 +0800)]
mirror: Go through ready -> complete process for 0 len image
When mirroring or active committing a zero length image, BLOCK_JOB_READY
is not reported now, instead the job completes because we short circuit
the mirror job loop.
This is inconsistent with non-zero length images, and only confuses
management software.
Let's do the same thing when seeing a 0-length image: report ready
immediately; wait for block-job-cancel or block-job-complete; clear the
cancel flag as existing non-zero image synced case (cancelled after
ready); then jump to the exit.
Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 9e48b025400b2d284e17860862b0a4aa02c6032d)
Fam Zheng [Tue, 24 Jun 2014 12:26:35 +0000 (20:26 +0800)]
blockjob: Add block_job_yield()
This will unset busy flag and put coroutine to sleep, can be used to
wait for QMP complete/cancel.
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit dc71ce45ded4e872e25c2de32d5e7a71842b0985) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
mirror: Fix resource leak when bdrv_getlength fails
The direct return will skip releasing of all the resouces at
immediate_exit, don't miss that.
Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 373df5b135b4a54e0abb394e9e703fef3ded093c) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Maydell [Mon, 4 Aug 2014 13:41:53 +0000 (14:41 +0100)]
hw/arm/boot: Set PC correctly when loading AArch64 ELF files
The code in do_cpu_reset() correctly handled AArch64 CPUs
when running Linux kernels, but was missing code in the
branch of the if() that deals with loading ELF files.
Correctly jump to the ELF entry point on reset rather than
leaving the reset PC at zero.
Reported-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Christopher Covington <cov@codeaurora.org> Cc: qemu-stable@nongnu.org
(cherry picked from commit a9047ec3f6ab56295cba5b07e0d46cded9e2a7ff) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Maydell [Tue, 22 Jul 2014 16:10:01 +0000 (17:10 +0100)]
hw/misc/imx_ccm.c: Add missing VMState list terminator
The VMStateDescription for the imx_ccm device was missing its
terminator. Found by static search of the codebase using
a regex based on one suggested by Ian Jackson:
pcregrep -rMi '(?s)VMStateField(?:(?!END_OF_LIST).)*?;' $(git grep -l 'VMStateField\[\]')
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org
(cherry picked from commit ef493d5c291e4689d64ff4973915a7442109a5c5) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
"vmstate_xhci_event" was introduced in commit 37352df3 ("xhci: add live
migration support"), and first released in v1.6.0. The field list in this
VMSD is not terminated with the VMSTATE_END_OF_LIST() macro.
During normal use (ie. migration), the issue is practically invisible,
because the "vmstate_xhci_event" object (with the unterminated field list)
is only ever referenced -- via "vmstate_xhci_intr" -- if xhci_er_full()
returns true, for the "ev_buffer" test. Since that field_exists() check
(apparently) almost always returns false, we almost never traverse
"vmstate_xhci_event" during migration, which hides the bug.
However, Amit's vmstate checker forces recursion into this VMSD as well,
and the lack of VMSTATE_END_OF_LIST() breaks the field list terminator
check (field->name != NULL) in dump_vmstate_vmsd(). The result is
undefined behavior, which in my case translates to infinite recursion
(because the loop happens to overflow into "vmstate_xhci_intr", which then
links back to "vmstate_xhci_event").
Add the missing terminator.
Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 3afca1d6d413592c2b78cf28f52fa24a586d8f56) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Chen Gang [Sat, 19 Jul 2014 01:21:46 +0000 (09:21 +0800)]
kvm-all: Use 'tmpcpu' instead of 'cpu' in sub-looping to avoid 'cpu' be NULL
If kvm_arch_remove_sw_breakpoint() in CPU_FOREACH() always be fail, it
will let 'cpu' NULL. And the next kvm_arch_remove_sw_breakpoint() in
QTAILQ_FOREACH_SAFE() will get NULL parameter for 'cpu'.
And kvm_arch_remove_sw_breakpoint() can assumes 'cpu' must never be NULL,
so need define additional temporary variable for 'cpu' to avoid the case.
Cc: qemu-stable@nongnu.org Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit dc54e2525389e903cee2b847cf761b5d857f75cb) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
KONRAD Frederic [Tue, 15 Jul 2014 15:18:44 +0000 (17:18 +0200)]
cadence_uart: check for serial backend before using it.
This checks that s->chr is not NULL before using it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit af52fe862fba686713044efdf9158195f84535ab) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Jason J. Herne [Thu, 29 Nov 2012 15:09:42 +0000 (10:09 -0500)]
s390x/kvm: synchronize guest floating point registers
Add code to kvm_arch_get_registers and kvm_arch_put_registers to
save/restore floating point registers. This missing sync was
unnoticed until migration of userspace that uses fprs.
Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[Update patch to latest upstream] Cc: qemu-stable@nongnu.org Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit 85ad6230b3af048109b3e949ca95ade4dd9a0bfa) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
disas/libvixl: prepend the include path of libvixl header files
Currently the Makefile of disas/libvixl appends
-I$(SRC_PATH)/disas/libvixl to QEMU_CFLAGS. As a consequence C++ files
that #include "utils.h", such as disas/libvixl/a64/instructions-a64.cc,
are going to look for utils.h on all the other include paths first.
When building QEMU as part of the Xen make system, another unrelated
utils.h file is going to be chosen for inclusion, causing a build
failure:
In file included from disas/libvixl/a64/instructions-a64.cc:27:0:
/qemu/disas/libvixl/a64/instructions-a64.h:88:64: error:
'rawbits_to_float' was not declared in this scope
const float kFP32PositiveInfinity = rawbits_to_float(0x7f800000);
Fix the problem by prepending (rather than appending) the libvixl
include path to QEMU_CFLAGS.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
(cherry picked from commit 834fb1b269f4c9eb0ffc058fd6ab5a018c3bce1f)
*added 2.0-specific fixup from Stefano in disas/Makefile.obj due to
lack of 849d8284
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Paolo Bonzini [Tue, 8 Jul 2014 05:42:05 +0000 (07:42 +0200)]
mc146818rtc: register the clock reset notifier on the right clock
Commit 884f17c (aio / timers: Convert rtc_clock to be a QEMUClockType,
2013-08-21) erroneously changed an occurrence of rtc_clock to
QEMU_CLOCK_REALTIME, which broke the RTC reset notifier in
mc146818rtc. Fix this.
I redid the patch myself since the original reporter did not sign
off on his.
Cc: qemu-stable@nongnu.org Reported-by: Lb peace <peaceustc@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 13c0cbaec5698f3984606e52bfcfb63ddfc29f00) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Le Tan [Wed, 2 Jul 2014 00:06:35 +0000 (08:06 +0800)]
pci: assign devfn to pci_dev before calling pci_device_iommu_address_space()
In function do_pci_register_device() in file hw/pci/pci.c, move the assignment
of pci_dev->devfn to the position before the call to
pci_device_iommu_address_space(pci_dev) which will use the value of
pci_dev->devfn.
Fixes: 9eda7d373e9c691c070eddcbe3467b991f67f6bd
pci: Introduce helper to retrieve a PCI device's DMA address space
Cc: qemu-stable@nongnu.org Signed-off-by: Le Tan <tamlokveer@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit efc8188e9398e54567b238b756eec2cc746cd2a4) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Commit 'virtio: validate config_len on load' restricted config_len
loaded from the wire to match the config_len that the device had.
Unfortunately, there are cases where this isn't true, the one
we found it on was the wce addition in virtio-blk.
Allow mismatched config-lengths:
*) If the version on the wire is shorter then fine
*) If the version on the wire is longer, load what we have space
for and skip the rest.
(This is mst@redhat.com's rework of what I originally posted)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 2f5732e9648fcddc8759a8fd25c0b41a38352be6) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Malformed input can have config_len in migration stream
exceed the array size allocated on destination, the
result will be heap overflow.
To fix, that config_len matches on both sides.
CVE-2014-0182
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
--
v2: use %ix and %zx to print config_len values Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit a890a2f9137ac3cf5b607649e66a6f3a5512d8dc) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
virtio: out-of-bounds buffer write on invalid state load
CVE-2013-4151 QEMU 1.0 out-of-bounds buffer write in
virtio_load@hw/virtio/virtio.c
So we have this code since way back when:
num = qemu_get_be32(f);
for (i = 0; i < num; i++) {
vdev->vq[i].vring.num = qemu_get_be32(f);
array of vqs has size VIRTIO_PCI_QUEUE_MAX, so
on invalid input this will write beyond end of buffer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit cc45995294b92d95319b4782750a3580cabdbc0c) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Andreas Färber [Wed, 18 Jun 2014 07:55:18 +0000 (00:55 -0700)]
hw: Fix qemu_allocate_irqs() leaks
Replace qemu_allocate_irqs(foo, bar, 1)[0]
with qemu_allocate_irq(foo, bar, 0).
This avoids leaking the dereferenced qemu_irq *.
Cc: Markus Armbruster <armbru@redhat.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
[PC Changes:
* Applied change to instance in sh4/sh7750.c
] Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Kirill Batuzov <batuzovk@ispras.ru>
[AF: Fix IRQ index in sh4/sh7750.c] Cc: qemu-stable@nongnu.org Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit f3c7d0389fe8a2792fd4c1cf151b885de03c8f62) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Andreas Färber [Tue, 13 May 2014 09:39:42 +0000 (11:39 +0200)]
sdhci: Fix misuse of qemu_free_irqs()
It does a g_free() on the pointer, so don't pass a local &foo reference.
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 127a4e1a51c038ec9167083b65d376dddcc64530) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Don Slutz [Wed, 25 Jun 2014 20:19:07 +0000 (16:19 -0400)]
pc: make isapc and pc-0.10 to pc-0.13 have 1.7.0 memory layout
QEMU 2.0 changed memory layout for isapc and pc-0.10 to pc-0.13.
This prevents migration from QEMU 1.7.0 for these
machine types when -m 3.5G is specified.
Cc: qemu-stable@nongnu.org Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Don Slutz <dslutz@verizon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Fixes: https://bugs.launchpad.net/qemu/+bug/1334307 Tested-by: "Slutz, Donald Christopher" <dslutz@verizon.com>
(cherry picked from commit 5f8632d3c3d7bc5ef24166ba7cf90fcfb2adbf7d)
Conflicts:
hw/i386/pc_piix.c
*removed dependency on c97294ec: smbios_legacy_mode always true pre-2.1.0
*removed dependency on de268e13: has_reserved_memory always false pre-2.1.0
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Gabriel L. Somlo [Wed, 23 Apr 2014 13:42:38 +0000 (09:42 -0400)]
SMBIOS: Rename symbols to better reflect future use
Rename the following symbols:
- smbios_set_type1_defaults() to the more general smbios_set_defaults();
- bool smbios_type1_defaults to the more general smbios_defaults;
- smbios_get_table() to smbios_get_table_legacy();
This patch contains no functional changes.
Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
(cherry picked from commit e6667f719caa7b5edcb491f61a7744f6a6affd27)
Alexander Graf [Tue, 24 Jun 2014 17:13:50 +0000 (19:13 +0200)]
virtio-serial: don't migrate the config space
The device configuration is set at realize time and never changes. It
should not be migrated as it is done today. For the sake of compatibility,
let's just skip them at load time.
Signed-off-by: Alexander Graf <agraf@suse.de>
[ added missing casts to uint16_t *,
added From, SoB and commit message,
Greg Kurz <gkurz@linux.vnet.ibm.com> ] Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit e38e943a1fa20d04deb1899be19b12aadec7a585) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cédric Le Goater [Tue, 24 Jun 2014 17:11:32 +0000 (19:11 +0200)]
virtio-net: byteswap virtio-net header
TCP connectivity fails when the guest has a different endianness.
The packets are silently dropped on the host by the tap backend
when they are read from user space because the endianness of the
virtio-net header is in the wrong order. These lines may appear
in the guest console:
[ 454.709327] skbuff: bad partial csum: csum=8704/4096 len=74
[ 455.702554] skbuff: bad partial csum: csum=8704/4096 len=74
The issue that got first spotted with a ppc64le PowerKVM guest,
but it also exists for the less common case of a x86_64 guest run
by a big-endian ppc64 TCG hypervisor.
Signed-off-by: Cédric Le Goater <clg@fr.ibm.com>
[ Ported from PowerKVM,
Greg Kurz <gkurz@linux.vnet.ibm.com> ] Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 032a74a1c0fcdd5fd1c69e56126b4c857ee36611) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The TCG_7_0_EBX_FEATURES macro was defined but never used (it even had a
typo that was never noticed). Make the existing TCG feature filtering
code use it.
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit d0a70f46fa9a3257089a56f2f620b0eff868557f) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Max Filippov [Fri, 20 Jun 2014 14:02:10 +0000 (18:02 +0400)]
hw/xtensa/xtfpga: fix FLASH mapping to boot region for KC705
On KC705 bootloader area is located at FLASH offset 0x06000000, not 0 as
on older xtfpga boards.
Cc: qemu-stable@nongnu.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit 37ed7c4b24f265c2a8c7248666544c9755514ec2) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Maydell [Mon, 23 Jun 2014 14:55:03 +0000 (15:55 +0100)]
coroutine-win32.c: Add noinline attribute to work around gcc bug
A gcc codegen bug in x86_64-w64-mingw32-gcc (GCC) 4.6.3 means that
non-debug builds of QEMU for Windows tend to assert when using
coroutines. Work around this by marking qemu_coroutine_switch
as noinline.
If we allow gcc to inline qemu_coroutine_switch into
coroutine_trampoline, then it hoists the code to get the
address of the TLS variable "current" out of the while() loop.
This is an invalid transformation because the SwitchToFiber()
call may be called when running thread A but return in thread B,
and so we might be in a different thread context each time
round the loop. This can happen quite often. Typically.
a coroutine is started when a VCPU thread does bdrv_aio_readv:
VCPU thread
main VCPU thread coroutine I/O coroutine
bdrv_aio_readv ----->
start I/O operation
thread_pool_submit_co
<------------ yields
back to emulation
Then I/O finishes and the thread-pool.c event notifier triggers in
the I/O thread. event_notifier_ready calls thread_pool_co_cb, and
the I/O coroutine now restarts *in another thread*:
iothread
main iothread coroutine I/O coroutine (formerly in VCPU thread)
event_notifier_ready
thread_pool_co_cb -----> current = I/O coroutine;
call AIO callback
But on Win32, because of the bug, the "current" being set here the
current coroutine of the VCPU thread, not the iothread.
noinline is a good-enough workaround, and quite unlikely to break in
the future.
(Thanks to Paolo Bonzini for assistance in diagnosing the problem
and providing the detailed example/ascii art quoted above.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403535303-14939-1-git-send-email-peter.maydell@linaro.org Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
(cherry picked from commit ff4873cb8c81db89668d8b56e19e57b852edb5f5) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Eduardo Habkost [Fri, 13 Jun 2014 03:28:32 +0000 (00:28 -0300)]
q35: Use PC_Q35_COMPAT_1_4 on pc-q35-1.4 compat_props
pc-q35-1.4 was incorrectly using PC_COMPAT_1_4 instead of
PC_Q35_COMPAT_1_4.
The only side-effect was that the hpet compat property (inherited from
PC_Q35_COMPAT_1_7) was missing.
Without this patch, pc-q35-1.4 inicorrectly initializes hpet-intcap to
0xff0104 (behavior introduced in QEMU 2.0, by commit 7a10ef51c2397ac4323bc786af02c58b413b5cd2).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
(cherry picked from commit 48cb7f3c1526b4632bd63d945cac80d26616d6f5) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Alexander Graf [Fri, 6 Jun 2014 12:46:05 +0000 (14:46 +0200)]
KVM: Fix GSI number space limit
KVM tells us the number of GSIs it can handle inside the kernel. That value is
basically KVM_MAX_IRQ_ROUTES. However when we try to set the GSI mapping table,
it checks for
r = -EINVAL;
if (routing.nr >= KVM_MAX_IRQ_ROUTES)
goto out;
erroring out even when we're only using all of the GSIs. To make sure we never
hit that limit, let's reduce the number of GSIs we get from KVM by one.
Cc: qemu-stable@nongnu.org Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 00008418aa22700f6c49e794e79f53aeb157d10f) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Ming Lei [Thu, 19 Jun 2014 08:12:00 +0000 (16:12 +0800)]
virtio-scsi: define dummy handle_output for vhost-scsi vqs
vhost userspace needn't to handle vq's notification from guest,
so define dummy handle_output callback for all vqs of vhost-scsi.
In some corner cases(such as when handling vq's reset from VM), virtio-pci
still trys to handle pending virtio-scsi events, then object check failure
inside virtio_scsi_handle_event() for vhost-scsi can be triggered.
The issue can be reproduced by 'rmmod virtio-scsi', 'system sleep' or reboot
inside VM.
Cc: qemu-stable@nongnu.org Cc: Anthony Liguori <aliguori@amazon.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 91d670fbf9945ca4ecbd123affb36889e7fe8a5d) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
vhost_verify_ring_mappings leaks mappings on error.
Fix this up.
Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 8617343faae6ba7e916137c6c9e3ef22c00565d8) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
scsi-disk: fix bug in scsi_block_new_request() introduced by commit 137745c
This patch fixes a bug in scsi_block_new_request() that was introduced
by commit 137745c5c60f083ec982fe9e861e8c16ebca1ba8. If the host cache
is used - i.e. if BDRV_O_NOCACHE is _not_ set - the 'break' statement
needs to be executed to 'fall back' to SG_IO.
Cc: qemu-stable@nongnu.org Signed-off-by: Ulrich Obergfell <uobergfe@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 2fe5a9f73b3446690db2cae8a58473b0b4beaa32) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Paolo Bonzini [Wed, 11 Jun 2014 12:52:09 +0000 (14:52 +0200)]
qdev: recursively unrealize devices when unrealizing bus
When the patch was posted that became 5c21ce7 (qdev: Realize buses
on device realization, 2014-03-12), it included recursive realization
and unrealization of devices when the bus's "realized" property
was toggled.
However, due to the same old worries about recursive realization
and prerequisites not being realized yet, those hunks were dropped when
committing the patch. Unfortunately, this causes a use-after-free bug
(easily reproduced by a PCI hot-unplug action).
Before the patch, device_unparent behaved as follows:
for each child bus
unparent bus ----------------------------.
| for each child device |
| unparent device ---------------. |
| | unrealize device | |
| | call dc->unparent | |
| '------------------------------- |
'----------------------------------------'
unrealize device
After the patch, it behaves as follows instead:
unrealize device --------------------.
| for each child bus |
| unrealize bus (A) |
'------------------------------------'
for each child bus
unparent bus ----------------------.
| for each child device |
| unrealize device (B) |
| call dc->unparent |
'----------------------------------'
At the step marked (B) the device might use data from the bus that is
not available anymore due to step (A).
To fix this, we need to unrealize devices before step (A). To sidestep
concerns about recursive realization, only do recursive unrealization
and leave the "value && !bus->realized" case as it is.
The resulting flow is:
for each child bus
unrealize bus ---------------------.
| for each child device |
| unrealize device (B) |
| call bc->unrealize (A) |
'----------------------------------'
unrealize device
for each child bus
unparent bus ----------------------.
| for each child device |
| unparent device |
'----------------------------------'
where everything is "powered down" before it is unassembled.
Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit 5942a19040fed313b316ab7b6e3d2d8e7b1625bb) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Paolo Bonzini [Wed, 11 Jun 2014 12:52:08 +0000 (14:52 +0200)]
qdev: reorganize error reporting in bus_set_realized
No semantic change.
Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit b7b34d055d82abaa511b35c9fc24efbb63dca0b1) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
hw: Consistently name Error ** objects errp, and not err
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
(cherry picked from commit a7737e4496aa3c1c8c3a4b4b9d5e44875fe21e12) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Michael R. Hines [Tue, 18 Feb 2014 02:34:06 +0000 (10:34 +0800)]
rdma: bug fixes
1. Fix small memory leak in parsing inet address from command line in data_init()
2. Fix ibv_post_send() return value check and pass error code back up correctly.
3. Fix rdma_destroy_qp() segfault after failure to connect to destination.
Reported-by: frank.yangjie@gmail.com Reported-by: dgilbert@redhat.com Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit e325b49a320b493cc5d69e263751ff716dc458fe) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Lieven [Tue, 10 Jun 2014 09:29:16 +0000 (11:29 +0200)]
migration: catch unknown flags in ram_load
if a saved vm has unknown flags in the memory data qemu
currently simply ignores this flag and continues which
yields in an unpredictable result.
This patch catches all unknown flags and aborts the
loading of the vm. Additionally error reports are thrown
if the migration aborts abnormally.
Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
(cherry picked from commit db80facefa62dff42bb50c73b0f03eda5f732b49) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Chen Gang [Thu, 1 May 2014 13:28:11 +0000 (21:28 +0800)]
arch_init: Be sure of only one exit entry with DPRINTF() for ram_load()
When DPRINTF() has effect, the original author wants to print all
ram_load() calling results. So need use 'goto' instead of 'return'
within ram_load(), just like other areas have done.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(cherry picked from commit 4798fe55c4d539ddf8c7f5befcddfa145b3c6102) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Gonglei [Mon, 19 May 2014 07:26:03 +0000 (15:26 +0800)]
qga: Fix handle fd leak in acquire_privilege()
token should be closed in all conditions.
So move CloseHandle(token) to "out" branch.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
(cherry picked from commit 374044f08fe18a18469b981812cd8695f5b3569c) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qemu_bh_schedule() is supposed to be thread-safe at least the first time
it is called. Unfortunately this is not quite true:
bh->scheduled = 1;
aio_notify(bh->ctx);
Since another thread may run the BH callback once it has been scheduled,
there is a race condition if the callback frees the BH before
aio_notify(bh->ctx) has a chance to run.
Reported-by: Stefan Priebe <s.priebe@profihost.ag> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Stefan Priebe <s.priebe@profihost.ag>
(cherry picked from commit 924fe1293c3e7a3c787bbdfb351e7f168caee3e9) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cornelia Huck [Tue, 27 May 2014 10:40:44 +0000 (12:40 +0200)]
s390x/css: handle emw correctly for tsch
We should not try to store the emw portion of the irb if extended
measurements are not applicable. In particular, we should not surprise
the guest by storing a larger irb if it did not enable extended
measurements.
Cc: qemu-stable@nongnu.org Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
(cherry picked from commit f068d320def7fd83bf0fcdca37b305f1c2ac5413) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Maydell [Mon, 9 Jun 2014 14:43:26 +0000 (15:43 +0100)]
target-arm: Fix errors in writes to generic timer control registers
The code for handling writes to the generic timer control registers
had several bugs:
* ISTATUS (bit 2) is read-only but we forced it to zero on any write
* the check for "was IMASK (bit 1) toggled?" incorrectly used '&' where
it should be '^'
* the handling of IMASK was inverted: we should set the IRQ if
ISTATUS is set and IMASK is clear, not if both are set
The combination of these bugs meant that when running a Linux guest
that uses the generic timers we would fairly quickly end up either
forgetting that the timer output should be asserted, or failing to
set the IRQ when the timer was unmasked. The result is that the guest
never gets any more timer interrupts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401803208-1281-1-git-send-email-peter.maydell@linaro.org Cc: qemu-stable@nongnu.org
(cherry picked from commit d3afacc7269fee45d54d1501a46b51f12ea7bb15) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
The first non-register argument isn't placed at offset 0.
Cc: qemu-stable@nongnu.org Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
(cherry picked from commit 0b919667302aa395bfde0328749dc21a0b123c44) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Maydell [Thu, 15 May 2014 13:40:23 +0000 (14:40 +0100)]
linux-user: Don't overrun guest buffer in sched_getaffinity
If the guest's "long" type is smaller than the host's, then
our sched_getaffinity wrapper needs to round the buffer size
up to a multiple of the host sizeof(long). This means that when
we copy the data back from the host buffer to the guest's
buffer there might be more than we can fit. Rather than
overflowing the guest's buffer, handle this case by returning
EINVAL or ignoring the unused extra space, as appropriate.
Note that only guests using the syscall interface directly might
run into this bug -- the glibc wrappers around it will always
use a buffer whose size is a multiple of 8 regardless of guest
architecture.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
(cherry picked from commit be3bd286bc06bb68cdc71748d9dd4edcd57b2b24) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
qcow2: Plug memory leak on qcow2_invalidate_cache() error paths
Introduced in commit 5a8a30d. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit a1904e48c4a9fb114d155419700bfb7d760273b9) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
block: Plug memory leak on brv_open_image() error path
Introduced in commit da557a. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b20e61e0d52eef57cf5db55087b16e0b5207e730) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduced in commit b543c5c. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 29f2601aa605f0af0cba8eedcff7812c6c8532e9) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
blockdev_init() leaks bs_opts when qemu_opts_create() fails, i.e. when
the ID is bad. Missed in commit ec9c10d.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 6376f9522372d589f3efe60001dc0486237dd375) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
bs_opts is leaked on all paths from its qdev_new() that don't got
through blockdev_init(). Add the missing QDECREF(), and zap bs_opts
after blockdev_init(), so the new QDECREF() does nothing when we go
through blockdev_init().
Leak introduced in commit f298d07. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 3cb0e25c4b417b7336816bd92de458f0770d49ff) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
block/qapi: Plug memory leak in dump_qobject() case QTYPE_QERROR
Introduced in commit a8d8ecb. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit f25391c2a6ef1674384204265429520ea50e82bc) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
block/vvfat: Plug memory leak in check_directory_consistency()
On error path. Introduced in commit a046433a. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 6262bbd363b53a1f19c473345d7cc40254dd5c73) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit b122c3b6d020e529b203836efb8f611ece787293) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
block/sheepdog: Plug memory leak in sd_snapshot_create()
Has always been leaky. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 2df5fee2dbd56a9c34afd6d7df6744da2d951ccb) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Introduced in commit 661a0f7. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit bb9cd2ee99f6537c072d5f4bac441717d3cd2bed) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Stefan Weil [Mon, 28 Apr 2014 17:20:00 +0000 (19:20 +0200)]
cputlb: Fix regression with TCG interpreter (bug 1310324)
Commit 0f842f8a246f2b5b51a11c13f933bf7a90ae8e96 replaced GETPC_EXT() which
was derived from GETPC() by GETRA_EXT() without fixing cputlb.c. A later
patch replaced GETRA_EXT() by GETRA() in exec/softmmu_template.h which
is included in cputlb.c.
The TCG interpreter failed because the values returned by GETRA() were no
longer explicitly set to 0. The redefinition of GETRA() introduced here
fixes this.
In addition, GETPC_ADJ which is also used in exec/softmmu_template.h is
set to 0. Both changes reduce the compiled code size for cputlb.c by more
than 100 bytes, so the normal TCG without interpreter also profits from
the reduced code size and slightly faster code.
Cc: qemu-stable@nongnu.org Reported-by: Giovanni Mascellani <gio@debian.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 7e4e88656c1e6192e9e47a2054d2dc190c1b840b) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Chunyan Liu [Mon, 7 Jul 2014 06:34:35 +0000 (14:34 +0800)]
qemu: support xen hvm direct kernel boot
qemu side patch to support xen HVM direct kernel boot:
if -kernel exists, calls xen_load_linux(), which will read kernel/initrd
and add a linuxboot.bin or multiboot.bin option rom. The
linuxboot.bin/multiboot.bin will load kernel/initrd and jump to execute
kernel directly. It's working when xen uses seabios.
During this work, found the 'kvmvapic' is in option_rom list, it should
not be there in xen case. Set s->vapic_control = 0 in xen_apic_realize()
to handle that.
Signed-off-by: Chunyan Liu <cyliu@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
Conflicts:
hw/i386/pc.c
hw/i386/pc_piix.c
include/hw/i386/pc.h
Roger Pau Monne [Fri, 23 May 2014 15:57:48 +0000 (17:57 +0200)]
tap-bsd: implement a FreeBSD only version of tap_open
The current behaviour of tap_open for BSD systems differ greatly from
it's Linux counterpart. Since FreeBSD supports interface renaming and
tap device cloning by opening /dev/tap, implement a FreeBSD specific
version of tap_open that behaves like it's Linux counterpart.
This is specially important for toolstacks that use Qemu (like Xen
libxl), in order to have a unified behaviour across suported
platforms.
Roger Pau Monne [Fri, 23 May 2014 15:57:47 +0000 (17:57 +0200)]
xen: fix usage of ENODATA
ENODATA doesn't exist on FreeBSD, so ENODATA errors returned by the
hypervisor are translated to ENOENT.
Also, the error code is returned in errno if the call returns -1, so
compare the error code with the value in errno instead of the value
returned by the function.
It changes all machine types to have this, not just pc & q35. But
only pc & q35 machines do anything with it. I.E. this machine
option will be ignored by other types.
If you add enough PCI devices then all mmio for them will not fit
below 4G which may not be the layout the user wanted. This allows
you to increase the below 4G address space that PCI devices can use
(aka decrease ram below 4G) and therefore in more cases not have any
mmio that is above 4G.
For example using "-machine pc,max-ram-below-4g=2G" on the command
line will limit the amount of ram that is below 4G to 2G.
Note: this machine option cannot be used to increase the amount of
ram below 4G.
Don Slutz [Mon, 28 Jul 2014 13:31:38 +0000 (09:31 -0400)]
xen-hvm: Fix xen_hvm_init() to adjust pc memory layout
This is just below_4g_mem_size and above_4g_mem_size which is used later in QEMU.
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Don Slutz <dslutz@verizon.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 3c2a96699e9fc09b5712dacfe200cdaaff0bb55c)
Max Filippov [Tue, 20 May 2014 10:48:45 +0000 (14:48 +0400)]
target-xtensa: fix cross-page jumps/calls at the end of TB
Use tb->pc instead of dc->pc to check for cross-page jumps.
When TB translation stops at the page boundary dc->pc points to the next
page allowing chaining to TBs in it, which is wrong.
Cc: qemu-stable@nongnu.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
(cherry picked from commit 433d33c555deeed375996e338df1a9510df401c6) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
virtio-scsi: Plug memory leak on virtio_scsi_push_event() error path
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 91e7fcca4743cf694eb0c8e7a8d938cf359b5bd8) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Kevin Wolf [Thu, 8 May 2014 11:35:09 +0000 (13:35 +0200)]
qcow1: Stricter backing file length check
Like qcow2 since commit 6d33e8e7, error out on invalid lengths instead
of silently truncating them to 1023.
Also don't rely on bdrv_pread() catching integer overflows that make len
negative, but use unsigned variables in the first place.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
(cherry picked from commit d66e5cee002c471b78139228a4e7012736b375f9) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Kevin Wolf [Thu, 8 May 2014 11:08:20 +0000 (13:08 +0200)]
qcow1: Validate image size (CVE-2014-0223)
A huge image size could cause s->l1_size to overflow. Make sure that
images never require a L1 table larger than what fits in s->l1_size.
This cannot only cause unbounded allocations, but also the allocation of
a too small L1 table, resulting in out-of-bounds array accesses (both
reads and writes).
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(cherry picked from commit 46485de0cb357b57373e1ca895adedf1f3ed46ec) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Kevin Wolf [Thu, 15 May 2014 14:10:11 +0000 (16:10 +0200)]
qcow1: Validate L2 table size (CVE-2014-0222)
Too large L2 table sizes cause unbounded allocations. Images actually
created by qemu-img only have 512 byte or 4k L2 tables.
To keep things consistent with cluster sizes, allow ranges between 512
bytes and 64k (in fact, down to 1 entry = 8 bytes is technically
working, but L2 table sizes smaller than a cluster don't make a lot of
sense).
This also means that the number of bytes on the virtual disk that are
described by the same L2 table is limited to at most 8k * 64k or 2^29,
preventively avoiding any integer overflows.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
(cherry picked from commit 42eb58179b3b215bb507da3262b682b8a2ec10b5) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Kevin Wolf [Wed, 7 May 2014 15:30:30 +0000 (17:30 +0200)]
qcow1: Check maximum cluster size
Huge values for header.cluster_bits cause unbounded allocations (e.g.
for s->cluster_cache) and crash qemu this way. Less huge values may
survive those allocations, but can cause integer overflows later on.
The only cluster sizes that qemu can create are 4k (for standalone
images) and 512 (for images with backing files), so we can limit it
to 64k.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
(cherry picked from commit 7159a45b2bf2dcb9f49f1e27d1d3d135a0247a2f)
Conflicts:
tests/qemu-iotests/group
*removed context lines for tests not present in v2.0.0
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Kevin Wolf [Wed, 7 May 2014 14:56:10 +0000 (16:56 +0200)]
qcow1: Make padding in the header explicit
We were relying on all compilers inserting the same padding in the
header struct that is used for the on-disk format. Let's not do that.
Mark the struct as packed and insert an explicit padding field for
compatibility.
Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
(cherry picked from commit ea54feff58efedc809641474b25a3130309678e7) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
It's a loop from i < num_sg and the array is VIRTQUEUE_MAX_SIZE - so
it's OK if the value read is VIRTQUEUE_MAX_SIZE.
Not a big problem in practice as people don't use
such big queues, but it's inelegant.
Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
(cherry picked from commit 937251408051e0489f78e4db3c92e045b147b38b) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
KVM only supports MSIX table size up to 256 vectors,
but some assigned devices support more vectors,
at the moment attempts to assign them fail with EINVAL.
Tweak the MSIX capability exposed to guest to limit table size
to a supported value.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Gonglei <arei.gonglei@huawei.com> Cc: qemu-stable@nongnu.org Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit 639973a4740f38789057744b550df3a175bc49ad) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Michael Tokarev [Fri, 2 May 2014 11:36:39 +0000 (15:36 +0400)]
configure: remove bashism
Commit e26110cfc67d48 added a check for shacmd to create a hash
for modules. This check in configure is using bash construct &>
to redirect both stdout and stderr, which does fun things on some
shells. Get rid of it, use standard redirection instead.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Fam Zheng <famz@redhat.com>
(cherry picked from commit 4fc00556ab68fc91c6d0150152f824d262c0be12) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
spapr_pci: Fix number of returned vectors in ibm, change-msi
Current guest kernels try allocating as many vectors as the quota is.
For example, in the case of virtio-net (which has just 3 vectors)
the guest requests 4 vectors (that is the quota in the test) and
the existing ibm,change-msi handler returns 4. But before it returns,
it calls msix_set_message() in a loop and corrupts memory behind
the end of msix_table.
This limits the number of vectors returned by ibm,change-msi to
the maximum supported by the actual device.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: qemu-stable@nongnu.org
[agraf: squash in bugfix from aik] Signed-off-by: Alexander Graf <agraf@suse.de>
(cherry picked from commit b26696b519f853c9844e5154858e583600ee3cdc) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Peter Maydell [Fri, 2 May 2014 13:45:14 +0000 (14:45 +0100)]
linux-user/elfload.c: Fix A64 code which was incorrectly acting like A32
The ARM target-specific code in elfload.c was incorrectly allowing
the 64-bit ARM target to use most of the existing 32-bit definitions:
most noticably this meant that our HWCAP bits passed to the guest
were wrong, and register handling when dumping core was totally
broken. Fix this by properly separating the 64 and 32 bit code,
since they have more differences than similarities.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
(cherry picked from commit 24e76ff06bcd0936ee8b04b15dca42efb7d614d1) Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
projects / qemu-upstream-4.5-testing.git / log