Peter Krempa [Mon, 19 Feb 2018 08:21:29 +0000 (09:21 +0100)]
qemu: blockcopy: Add check for bandwidth
QEMU code does not work well with too big numbers on the JSON monitor so
our monitor code supports sending only numbers up to LLONG_MAX. Avoid a
weird error message by limiting the size of the 'bandwidth' parameter
for block copy.
Peter Krempa [Mon, 19 Feb 2018 06:19:47 +0000 (07:19 +0100)]
virsh: Fix internal naming of some blockjob commands
The variable names for the options and information about a command
should have an underscore in places where the virsh command has a
hyphen. The function callback name should capitalize the letter after
the hyphen. This was not used in 'blockcommit', 'blockcopy', 'blockjob',
'blockpull', and 'blockresize' commands.
qemu: remove virConnectPtr from some more startup code paths
There's a few places in startup code paths which pass around a
virConnectPtr which is no longer required. Specifically, the
qemuProcessStart() method now only requires a non-NULL connection if
autodestroy is requested.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu: stop passing in virConnectPtr for looking up networks
When setting up graphics, we sometimes need to resolve networks,
requiring the caller to pass in a virConnectPtr, except sometimes they
pass in NULL. Use virGetConnectNetwork() to acquire the connection to
the network driver when it is needed.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
During domain startup there are many places where we need to acquire
secrets. Currently code passes around a virConnectPtr, except in the
places where we pass in NULL. So there are a few codepaths where ability
to start guests using secrets will fail. Change to acquire a handle to
the secret driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: stop passing virConnectPtr into virDomainDiskTranslateSourcePool
Rather than expecting callers to pass a virConnectPtr into the
virDomainDiskTranslateSourcePool() method, just acquire a connection
to the storage driver when needed.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu: stop passing virConnectPtr into qemuMonitorStartCPUs
There is a long standing hack to pass a virConnectPtr into the
qemuMonitorStartCPUs method, so that when the text monitor prompts
for a disk password, we can lookup virSecretPtr objects. This causes
us to have to pass a virConnectPtr around through countless methods
up the call chain....except some places don't have any virConnectPtr
available so have always just passed NULL. We can finally fix this
disastrous design by using virGetConnectSecret() to open a connection
to the secret driver at time of use.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: reimplement virDomainNetResolveActualType in terms of public API
Now that we have the ability to easily open connections to secondary
drivers, eg network:///system, it is possible to reimplement the
virDomainNetResolveActualType method in terms of the public API. This
avoids the need to have the network driver provide a callback for it.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
driver: allow override of connection for secondary drivers
When the test suite is running, we don't want to be triggering the
startup of daemons for the secondary drivers. Thus we must provide a way
to set a custom connection for the secondary drivers, to override the
default logic which opens a new connection.
This will also be useful for code where we have a whole set of separate
functions calls all needing the secret driver. Currently the connection
to the secret driver is opened & closed many times in quick
succession. This will allow us to pre-open a connection temporarily,
improving the performance of startup.
Reviewed-by: John Ferlan <jferlan@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Zhuang Yanying [Wed, 14 Feb 2018 09:22:39 +0000 (17:22 +0800)]
qemu: Generate SMBIOS Chassis strings command line
This wires up the previously added Chassis strings XML schema to be able to
generate comamnd line args for QEMU. This requires QEMU >= 2.1 release
containing this patch:
m4: disable gcc8 -Wcast-function-type warnings from -Wextra
The -Wextra flag bundle gained a new warning -Wcast-function-type.
This complains if you cast between two function prototypes where
the number of parameters or their data types are not compatible.
Unfortunately we need such "bad" function casts for our event
callbacks. It is possible to silence the warning by first casting
to the generic "void (*)(void)" function prototype, but that is
rather ugly to add throughout libvirt code.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Wed, 14 Feb 2018 14:17:51 +0000 (15:17 +0100)]
virsh: Remove <backingStore> sub-element in virshFindDisk
Previously we've removed the data only in virshUpdateDiskXML when
changing the disk source for the CDROM since the backing store would be
invalid. Move the code into a separate function and callit from
virshFindDisk which is also used when detaching disk.
The detaching code does not necessarily need to get the full backing
chain since it will need to act on the one managed by libvirt anyways
and this also takes care of problems when parts of the backing store
were invalid due to buggy RBD detection code.
Peter Krempa [Wed, 14 Feb 2018 13:12:23 +0000 (14:12 +0100)]
util: storage: Remove detected authentication data for backing chains
We can't really detect all the authentication data in a sane manner for
disk backing chains. Since the old RBD parser parses it in some cases as
the argv->XML convertor requires it, we can't just drop it.
Instead clear any detected authentication data in the code paths related
to disk backing chain lookup and fix the tests to cope with the change.
Peter Krempa [Mon, 12 Feb 2018 14:44:11 +0000 (15:44 +0100)]
storage: Fix formatting and parsing of qemu type 'UnixSocketAddress'
The documentation for the JSON/qapi type 'UnixSocketAddress' states that
the unix socket path field is named 'path'. Unfortunately qemu uses
'socket' in case of the gluster driver (despite documented otherwise).
Add logic which will format the correct fields while keeping support of
the old spelling.
Jiri Denemark [Wed, 14 Feb 2018 12:16:52 +0000 (13:16 +0100)]
spec: Drop overlapping triggers
The postun trigger for libvirt-daemon was defined twice for overlapping
ranges of package verions if systemd support was switched off (which
happens when building on something ancient, such as RHEL-6).
Let's combine the two triggers into the one which is called when
libvirt-daemon < 1.3.0 is uninstalled. As a side effect, virtlockd and
virtlogd might be reloaded twice after an upgrade from libvirt newer
than 1.2.1 and older than 1.3.0 (by postun script from the old libvirt
and postun trigger from the new libvirt).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Jiri Denemark [Wed, 14 Feb 2018 13:49:28 +0000 (14:49 +0100)]
spec: Build virt-login-shell iff LXC driver is enabled
Building virt-login-shell doesn't really make any sense without LXC and
doing so even breaks "make rpm" since the associated files are installed
but unpackaged (the login-shell sub package already depends on LXC).
Signed-off-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
We're already checking if IPv4 prefix isn't too long. But we are
not checking if it isn't too short. QEMU supports prefixes longer
than 4 (including). I haven't find anything similar related to
IPv6 in qemu sources.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Bjoern Walk [Thu, 8 Feb 2018 12:38:25 +0000 (13:38 +0100)]
tests: run virshtest independent of current pwd
virshtest execves the virsh binary. Make sure that it finds the binary's
location independent of the current working directory by specifying the
absolute path as determined by the build environment.
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com> Signed-off-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
When no GIC version is specified, we currently default to GIC v2;
however, that's not a great default, since guests will fail to
start if the hardware only supports GIC v3.
Change the behavior so that a sensible default is chosen instead.
That basically means using the same algorithm whether the user
didn't explicitly enable the GIC feature or they explicitly
enabled it but didn't specify any GIC version.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Account for the fact that the default might change based on what
GIC versions are supported by QEMU. That's not the case at the
moment, but it will be soon.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
conf: Integrate all features ABI checks in the switch
There are a few stray checks which still live outside of the
switch in virDomainDefFeaturesCheckABIStability() for no good
reason. Move them inside the switch, and update the error
messages to be consistent while at it.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
Unlike most other features, VIR_DOMAIN_FEATURE_CAPABILITIES is
of type virDomainCapabilitiesPolicy instead of virTristateSwitch,
so we need to handle it separately for the error message to make
sense.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
qemu: Move feature verification from PostParse() to Validate()
We want to perform all feature verification in a single spot, but
some of it (eg. GIC) is currently being performed at command line
generation time, and moving it to PostParse() would cause guests
to disappear. Moving verification to Validate() allows us to
side-step the issue.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: John Ferlan <jferlan@redhat.com>
On reflection adding defaults for arbitrary guest XML device config
settings to the qemu.conf is not a sustainable path. Removing the
support for rx/tx queue size so that it doesn't set a bad precedent.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
John Ferlan [Fri, 9 Feb 2018 13:52:10 +0000 (08:52 -0500)]
qemu: Alter condition to avoid possible NULL deref
Commit 'f0f2a5ec2' neglected to adjust the if condition to split
out the possibility that the @watchdog is NULL when altering the
message to add detail about the model.
Just split out the condition and use previous/original message, but
with the new message code.
The fix for CVE-2018-6764 introduced a potential deadlock scenario
that gets triggered by the NSS module when virGetHostname() calls
getaddrinfo to resolve the hostname:
#0 0x00007f6e714b57e7 in futex_wait
#1 futex_wait_simple
#2 __pthread_once_slow
#3 0x00007f6e71d16e7d in virOnce
#4 0x00007f6e71d0997c in virLogInitialize
#5 0x00007f6e71d0a09a in virLogVMessage
#6 0x00007f6e71d09ffd in virLogMessage
#7 0x00007f6e71d0db22 in virObjectNew
#8 0x00007f6e71d0dbf1 in virObjectLockableNew
#9 0x00007f6e71d0d3e5 in virMacMapNew
#10 0x00007f6e71cdc50a in findLease
#11 0x00007f6e71cdcc56 in _nss_libvirt_gethostbyname4_r
#12 0x00007f6e724631fc in gaih_inet
#13 0x00007f6e72464697 in __GI_getaddrinfo
#14 0x00007f6e71d19e81 in virGetHostnameImpl
#15 0x00007f6e71d1a057 in virGetHostnameQuiet
#16 0x00007f6e71d09936 in virLogOnceInit
#17 0x00007f6e71d09952 in virLogOnce
#18 0x00007f6e714b5829 in __pthread_once_slow
#19 0x00007f6e71d16e7d in virOnce
#20 0x00007f6e71d0997c in virLogInitialize
#21 0x00007f6e71d0a09a in virLogVMessage
#22 0x00007f6e71d09ffd in virLogMessage
#23 0x00007f6e71d0db22 in virObjectNew
#24 0x00007f6e71d0dbf1 in virObjectLockableNew
#25 0x00007f6e71d0d3e5 in virMacMapNew
#26 0x00007f6e71cdc50a in findLease
#27 0x00007f6e71cdc839 in _nss_libvirt_gethostbyname3_r
#28 0x00007f6e71cdc724 in _nss_libvirt_gethostbyname2_r
#29 0x00007f6e7248f72f in __gethostbyname2_r
#30 0x00007f6e7248f494 in gethostbyname2
#31 0x000056348c30c36d in hosts_keys
#32 0x000056348c30b7d2 in main
Fortunately the extra stuff virGetHostname does is totally irrelevant to
the needs of the logging code, so we can just inline a call to the
native hostname() syscall directly.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
rpc: export xdr_virNetMessageError for virnetmessagetest on Win32
The Win32 symbol export file format can't do wildcards, so none of
the 'xdr_*' symbols are exported from the libvirt DLL. This doesn't
matter generally since the RPC client is built into the DLL and we
don't build libvirtd on Win32. The virnetmessagetest, however, does
require xdr_virNetMessageError to be exported, so just do a hack for
that.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
docs: document requirement to provide Signed-off-by lines for DCO
Document that contributors are required to assert compliance with the
Developers Certification of Origin 1.1, by providing Signed-off-by tags
for all commit messages. The DCO is formally stating what we have long
implicitly expected of contributors in terms of their legal rights to
make the contribution. This puts the project in a stronger position
should any questions around contributions be raised going forward in the
future.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
cfg: forbid includes of headers in network and storage drivers again
Loadable drivers must never depend on each other. Over time some usage
mistakenly crept in for the storage and network drivers, but now this is
eliminated the syntax-check rules can enforce this separation once more.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
build: passing the "-z defs" linker flag to prevent undefined symbols
Undefined symbols are a bad thing in general because they can get
resolved in unexpected ways at runtime if multiple sources provide the
same symbol name. For example both glibc and libtirpc may provide XDR
symbols and we want to ensure that we resolve to libtirpc if that's what
we originally built against.
The toolchain maintainers thus strongly recommend that all applications
use the '-z defs' linker flag to prevent undefined symbols. This is
shortly becoming part of the default linker flags for RPMs. As an added
benefit this aligns Linux builds with Windows builds, where the linker
has never permitted undefined symbols.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
build: explicitly link all modules with libvirt.so
The dlopened modules we currently build all use various symbols from
libvirt.so, but don't actually link to it. They rely on the libvirtd
daemon re-exporting the libvirt.so symbols. This means that at the
time the modules are linked, they contain a huge number of undefined
symbols. It also means that these undefined symbols are not versioned,
so despite us providing a LIBVIRT_PRIVATE_XXXX version that
intentionally changes on every release, the loadable modules could
actually be loaded into any libvirtd regardless of version.
This change explicitly links all modules against libvirt.so so
that they don't rely on the re-export behave and can be fully resolved
at build time. This will give us a stronger guarantee modules will
actually be loadable at runtime and that we're using modules from the
matched build.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
storage: export virStoragePoolLookupByTargetPath as a public API
The storagePoolLookupByTargetPath() method in the storage driver is used
by the QEMU driver during block migration. If there's a valid use case
for this in the QEMU driver, then external apps likely have similar
needs. Exposing it in the public API removes the direct dependancy from
the QEMU driver to the storage driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: move virStorageTranslateDiskSourcePool into domain conf
The virStorageTranslateDiskSourcePool method modifies a virDomainDiskDef
to resolve any storage pool reference. For some reason this was added
into the storage driver code, despite working entirely in terms of the
public APIs. Move it into the domain conf file and rename it to match the
object it modifies.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The networkDnsmasqConfContents() method is only used by the test suite
and that's only built with WITH_NETWORK is set. So there is no longer
any reason to conditionalize the declaration of this method.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: expand network device callbacks to cover resolving NIC type
Currently the QEMU driver will call directly into the network driver
impl to modify resolve the atual type of NICs with type=network. It
has todo this before it has allocated the actual NIC. This introduces
a callback system to allow us to decouple the QEMU driver from the
network driver.
This is a short term step, as it ought to be possible to achieve the
same end goal by simply querying XML via the public network API. The
QEMU code in question though, has no virConnectPtr conveniently
available at this time.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
qemu: replace networkGetNetworkAddress with public API calls
The QEMU driver calls into the network driver to get the first IP
address of the network. This information is readily available via the
formal public API by fetching the XML doc and then parsing it.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: expand network device callbacks to cover bandwidth updates
Currently the QEMU driver will call directly into the network driver
impl to modify network device bandwidth for interfaces with
type=network. This introduces a callback system to allow us to decouple
the QEMU driver from the network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
conf: introduce callback registration for domain net device allocation
Currently virt drivers will call directly into the network driver impl
to allocate domain interface devices where type=network. This introduces
a callback system to allow us to decouple the virt drivers from the
network driver.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Rather than static linking in various of the helper libraries to
libvirt_lxc, just link against the main libvirt.so. This is more memory
and time efficient because it will already be cached in memory and
sharable between processes.
CAPNG flags need adding because the LXC code directly calls various
libcapng APIs and no longer inherits the CAPNG flags via the statically
linked .a libs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
rpc: don't link in second copy of RPC code to libvirtd & lockd plugin
The libvirt_driver_remote.la static library is linked into the
libvirt.so dynamic library, providing both the generic RPC layer code
and the remote protocol client driver. The libvirtd daemon the itself
links to libvirt_driver_remote.la, in order to get access to the generic
RPC layer code and the XDR functions for the remote driver. This means
we get multiple copies of the same code in libvirtd, one direct and one
indirect via libvirt.so. The same mistake affects the lockd plugin.
The libvirtd daemon should instead just link aganist the generic RPC
layer code that's in libvirt.so. This is easily doable if we add exports
for the few symbols we've previously missed, and wildcard export xdr_*
to expose the auto-generated XDR marshallers.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
storage: move storage file backend framework into util directory
The QEMU driver loadable module needs to be able to resolve all ELF
symbols it references against libvirt.so. Some of its symbols can only
be resolved against the storage_driver.so loadable module which creates
a hard dependancy between them. By moving the storage file backend
framework into the util directory, this gets included directly in the
libvirt.so library. The actual backend implementations are still done as
loadable modules, so this doesn't re-add deps on gluster libraries.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
storage: extract storage file backend from main storage driver backend
The storage driver backends are serving the public storage pools API,
while the storage file backends are serving the internal QEMU driver and
/ or libvirt utility code.
To prep for moving this storage file backend framework into the utility
code, split out the backend definitions.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tiago M. Vieira [Fri, 26 Jan 2018 19:33:02 +0000 (14:33 -0500)]
fix regex to check CN from server certificate
Currently when the script validates the PKI files and
the certificate 'Subject:' field contains RDNs after
the Common Name (CN), these values are also included,
creating a false result that the CN is not correct.
A small change to the sed regex fixes this issue, by
extracting only the value for CN and nothing else. The
regex is replaced with the exact same regex used to
extract the CN value from the client certificate.
Lubomir Rintel [Sat, 27 Jan 2018 22:43:58 +0000 (23:43 +0100)]
virlog: determine the hostname on startup CVE-2018-6764
At later point it might not be possible or even safe to use getaddrinfo(). It
can in turn result in a load of NSS module.
Notably, on a LXC container startup we may find ourselves with the guest
filesystem already having replaced the host one. Loading a NSS module
from the guest tree would allow a malicous guest to escape the
confinement of its container environment because libvirt will not yet
have locked it down.
Refreshing the halted state can cause VM performance issues. Since
s390 is currently the only architecture with a known interest in
the halted state, we're avoiding to call QEMU on other platforms.
Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com>
Peter Krempa [Tue, 6 Feb 2018 15:00:45 +0000 (16:00 +0100)]
qemu: domain: Store vcpu halted state as a tristate
Since it may be possible that the state is unknown in some cases we
should store it as a tristate so that other code using it can determine
whether the state was updated.
Peter Krempa [Tue, 6 Feb 2018 14:50:05 +0000 (15:50 +0100)]
qemu: driver: Extract vcpu halted state directly
Don't extract the halted state into a separate array, but rater access
the vcpu structures directly. We still need to call the vcpu helper to
retrieve the performance statistics though.
The virt-aa-helper fails to parse the xmls with the memory/cpu
hotplug features or user assigned aliases. Set the features in
xmlopt->config for the parsing to succeed.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com> Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com> Reviewed-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
If the QEMU version running is new enough (based on the DUMP_COMPLETED
event), then we can add a 'detach' boolean to the dump-guest-memory
command in order to tell QEMU to run in a thread. This ensures that we
don't lock out other commands while the potentially long running dump
memory is completed.
This allows the usage of a qemuDumpWaitForCompletion which will wait
for the event while the qemuDomainGetJobInfoDumpStats can be used via
qemuDomainGetJobInfo in order to query QEMU to determine how far along
the job is.
Now that we have a true async job, we'll only set the dump_memory_only
flag only when @detach=false; otherwise, we note that the job is a
for stats dump this allows the opposite end for job info to determine
what to copy.
John Ferlan [Mon, 20 Nov 2017 20:02:59 +0000 (15:02 -0500)]
qemu: Introduce qemuMonitor[JSON]QueryDump
Add the query-dump API's in order to allow the dump-guest-memory
to be used to monitor progress. This will use the dump stats
extraction helper to fill a return buffer.
John Ferlan [Mon, 20 Nov 2017 14:51:22 +0000 (09:51 -0500)]
qemu: Introduce qemuProcessHandleDumpCompleted
Handle a DUMP_COMPLETED event processing the status, stats, and
error string. Use the @status in order to copy the error that
was generated whilst processing the @stats data. If an error was
provided by QEMU, then use that instead.
If there's no async job, we can just ignore the data.
John Ferlan [Mon, 20 Nov 2017 13:56:24 +0000 (08:56 -0500)]
qemu: Add support for DUMP_COMPLETED event
The event will be fired when the domain memory only dump completes.
Fill in a return buffer to store/pass along the dump statistics that
will be eventually shared by a query-dump command. Also pass along
the status of the filling and any possible error received.
Define the qemuMonitorDumpStats as a new job JobStatsType to handle
being able to get memory dump statistics. For now do nothing with
the new TYPE_MEMDUMP.
Add a TYPE_SAVEDUMP so that when coalescing stats for a save or
dump we don't needlessly try to get the mirror stats for a migration.
Other conditions can still use MIGRATION and SAVEDUMP interchangably
including usage of the @migStats field to fetch/store the data.
John Ferlan [Fri, 26 Jan 2018 17:30:50 +0000 (12:30 -0500)]
qemu: Convert jobInfo stats into a union
Convert the stats field in _qemuDomainJobInfo to be a union. This
will allow for the collection of various different types of stats
in the same field.
When starting the async job that will end up being used for stats,
set the @statsType value appropriately. The @mirrorStats are
special and are used with stats.mig in order to generate the
returned job stats for a migration.
Using the NONE should avoid the possibility that some random
async job would try to return stats for migration even though
a migration is not in progress.
For now a migration and a save job will use the same statsType
Peter Krempa [Mon, 5 Feb 2018 13:05:05 +0000 (14:05 +0100)]
util: bitmap: Note that shrinking the bitmap requires clearing of unused bits
Note the fact that the unused portion of the last element in the bitmap
needs to be cleared, since we use functions which process only full-size
elements and don't really deal with individual bits.
Peter Krempa [Mon, 5 Feb 2018 12:36:57 +0000 (13:36 +0100)]
util: bitmap: Fix value of 'map_alloc' when shrinking bitmap
The virBitmap code uses VIR_RESIZE_N to do quadratic scaling, which
means that along with the number of requested map elements we also need
to keep the number of actually allocated elements for the scaling
algorithm to work properly.
The shrinking code did not fix 'map_alloc' thus virResizeN might
actually not expand the bitmap properly after called on a previously
shrunk bitmap.
projects / libvirt.git / log