Paolo Bonzini [Fri, 22 Feb 2013 16:36:25 +0000 (17:36 +0100)]
block-migration: add lock
Some state is shared between the block migration code and its AIO
callbacks. Once block migration will run outside the iothread,
the block migration code and the AIO callbacks will be able to
run concurrently. Protect the critical sections with a separate
lock. Do the same for completed_sectors, which can be used from
the monitor.
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Paolo Bonzini [Fri, 22 Feb 2013 16:36:18 +0000 (17:36 +0100)]
migration: do not nest flushing of device data
Completion of migration is currently done with a "nested" loop that
invokes buffered_flush: migrate_fd_completed is called by
buffered_file_thread, which calls migrate_fd_cleanup, which calls
buffered_close (via qemu_fclose), which flushes the buffer.
Simplify this, by reusing the buffered_flush call of buffered_file_thread.
Then if qemu_savevm_state_complete was called, and the buffer is empty
(including the QEMUFile buffer, for which we need the previous patch), we
are done.
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Paolo Bonzini [Fri, 22 Feb 2013 16:36:17 +0000 (17:36 +0100)]
migration: simplify error handling
Always use qemu_file_get_error to detect errors, since that is how
QEMUFile itself drops I/O after an error occurs. There is no need
to propagate and check return values all the time.
Also remove the "complete" member, since we know that it is set (via
migrate_fd_cleanup) only when the state changes.
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Paolo Bonzini [Fri, 22 Feb 2013 16:36:16 +0000 (17:36 +0100)]
migration: use qemu_file_set_error
Remove the return value of buffered_flush, pass it via the error code
of s->file. Once this is done, the error can be retrieved simply
via migrate_fd_close's call to qemu_fclose.
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Paolo Bonzini [Fri, 22 Feb 2013 16:36:14 +0000 (17:36 +0100)]
qemu-file: temporarily expose qemu_file_set_error and qemu_fflush
Right now, migration cannot entirely rely on QEMUFile's automatic
drop of I/O after an error, because it does its "real" I/O outside
the put_buffer callback. To fix this until buffering is gone, expose
qemu_file_set_error which we will use in buffered_flush.
Similarly, buffered_flush is not a complete flush because some data may
still reside in the QEMUFile's own buffer. This somewhat complicates the
process of closing the migration thread. Again, when buffering is gone
buffered_flush will disappear and calling qemu_fflush will not be needed;
in the meanwhile, we expose the function for use in migration.c.
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Paolo Bonzini [Fri, 22 Feb 2013 16:36:09 +0000 (17:36 +0100)]
migration: move more error handling to migrate_fd_cleanup
The next patch will add more cases where qemu_savevm_state_cancel
needs to be called; prepare for that already, the function can be
called twice with no ill effect.
Reviewed-by: Orit Wasserman <owasserm@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
Anthony Liguori [Mon, 11 Mar 2013 01:39:17 +0000 (20:39 -0500)]
Merge remote-tracking branch 'origin/master' into staging
* origin/master: (75 commits)
tcg: Don't make exitreq flag a local temporary
Makefile: Add subdir dependency on config-devices-all.mak
make_device_config.sh: Emit dependency file to directory where included
Revert "make_device_config.sh: Fix target path in generated dependency file"
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
...
Anthony Liguori [Mon, 11 Mar 2013 00:39:07 +0000 (19:39 -0500)]
Merge remote-tracking branch 'bonzini/hw-dirs' into staging
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Anthony Liguori [Mon, 11 Mar 2013 00:33:03 +0000 (19:33 -0500)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
# By Lei Li (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
Fix the wrong description in qemu manual
pci_host: Drop write-only address_space field
rng-random: Use qemu_open / qemu_close
configure: Require at least spice-protocol-0.12.3
osdep: replace setsockopt by qemu_setsockopt
lm32: remove unused function
rtc-test: Fix test failures with recent glib
configure: Create link to icon bitmap for out-of-tree builds
Anthony Liguori [Mon, 11 Mar 2013 00:30:45 +0000 (19:30 -0500)]
Merge remote-tracking branch 'bonzini/scsi-next' into staging
# By Paolo Bonzini (4) and Peter Lieven (2)
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi-disk: handle io_canceled uniformly and correctly
scsi-disk: do not complete canceled UNMAP requests
scsi: do not call scsi_read_data/scsi_write_data for a canceled request
iscsi: look for pkg-config file too
iscsi: add iscsi_truncate support
iscsi: retry read, write, flush and unmap on unit attention check conditions
Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Tested-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 0ba5565b1ed44380c57d4a5fab86e9549f581ebf.1362822910.git.blauwirbel@gmail.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The value is not actually live across basic blocks, so there's no
need for the local property. This eliminates storing the temporary
to its home location at the branch.
Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Andreas Färber [Thu, 21 Feb 2013 15:26:47 +0000 (16:26 +0100)]
Makefile: Add subdir dependency on config-devices-all.mak
What 23bf49b5eca716aaad073f2b47613434e1515cb5 really seemed to try to
fix is that Makefile could recurse into *-softmmu/ subdirectories before
a new *-softmmu/config-devices.mak was generated from pci.mak.
Fix this by adding a dependency on config-all-devices.mak, which in turn
has dependencies on *-softmmu/config-devices.mak.
Reported-by: Gerhard Wiesinger <lists@wiesinger.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Andreas Färber [Thu, 21 Feb 2013 15:26:46 +0000 (16:26 +0100)]
make_device_config.sh: Emit dependency file to directory where included
Placing the config-devices.mak.d file alongside the config-devices.mak
file in *-softmmu/ lead to it getting included into through
*-softmmu/Makefile in addition to ./Makefile, leading to confusion.
Instead, emit it to ./%-config-devices.mak.d, where it is included.
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
While *-softmmu/config-devices.mak.d is included through *.d pattern via
Makefile.target, the make_devices_config.sh call these dependencies are
for is in ./Makefile. Therefore revert to original behavior.
This should unbreak pci.mak dependencies not propagating.
Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 9 Mar 2013 11:02:23 +0000 (11:02 +0000)]
Merge branch 's390-for-upstream' of git://github.com/agraf/qemu
* 's390-for-upstream' of git://github.com/agraf/qemu:
s390/virtio-ccw: remove redundant call to blockdev_mark_auto_del
s390/css: Fix subchannel detection
Allow virtio-net features for legacy s390 virtio bus
s390: virtio-ccw maintainer
s390: simplify kvm cpu init
Blue Swirl [Sat, 9 Mar 2013 11:02:07 +0000 (11:02 +0000)]
Merge branch 'ppc-for-upstream' of git://github.com/agraf/qemu
* 'ppc-for-upstream' of git://github.com/agraf/qemu: (66 commits)
pseries: Add compatible property to root of device tree
target-ppc: Move CPU aliases out of translate_init.c
target-ppc: Report CPU aliases for QMP
target-ppc: List alias names alongside CPU models
target-ppc: Make host CPU a subclass of the host's CPU model
PPC: xnu kernel expects FLUSH to be cleared on STOP
PPC: Fix dma interrupt
target-ppc: Fix PPC_DUMP_SPR_ACCESS build
target-ppc: Synchronize FPU state with KVM
target-ppc: Add mechanism for synchronizing SPRs with KVM
Save memory allocation in the elf loader
pseries: Implement h_read hcall
target-ppc: Change "POWER7" CPU alias
target-ppc: Fix remaining microcontroller typos among models
target-ppc: Split model definitions out of translate_init.c
target-ppc: Update Coding Style for CPU models
target-ppc: Turn descriptive CPU model comments into device descriptions
target-ppc: Turn descriptive CPU family comments into device descriptions
target-ppc: Set remaining fields on CPU family classes
target-ppc: Register all types for TARGET_PPCEMB
...
Allow virtio-net features for legacy s390 virtio bus
Enable all virtio-net features for the legacy s390 virtio bus. This also fixes
kernel BUG at /usr/src/packages/BUILD/kernel-default-3.0.58/linux-3.0/drivers/s390/kvm/kvm_virtio.c:121!
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Cc: qemu-stable@nongnu.org Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Mon, 25 Feb 2013 19:27:12 +0000 (19:27 +0000)]
pseries: Add compatible property to root of device tree
Currently, for the pseries machine the device tree supplied by qemu to SLOF
and from there to the guest does not include a 'compatible property' at the
root level. Usually that works fine, since in this case the compatible
property doesn't really give any information not already found in the
'device_type' or 'model' properties.
However, the lack of 'compatible' confuses the bootloader install in the
SLES11 SP2 and SLES11 SP3 installers. This patch therefore adds a token
'compatible' property to work around that.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Cc: qemu-stable@nongnu.org Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Mon, 25 Feb 2013 03:43:17 +0000 (03:43 +0000)]
target-ppc: Move CPU aliases out of translate_init.c
Move array of CPU aliases to cpu-models.c, alongside model definitions.
This requires to zero-terminate the aliases array since ARRAY_SIZE() can
no longer be used in translate_init.c then.
Suggested-by: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Wed, 20 Feb 2013 16:41:51 +0000 (16:41 +0000)]
target-ppc: Synchronize FPU state with KVM
Currently qemu does not get and put the state of the floating point and
vector registers to KVM. This is obviously a problem for savevm, as well
as possibly being problematic for debugging of FP-using guests.
This patch fixes this by using new extensions to the ONE_REG interface to
synchronize the qemu floating point state with KVM.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
David Gibson [Wed, 20 Feb 2013 16:41:50 +0000 (16:41 +0000)]
target-ppc: Add mechanism for synchronizing SPRs with KVM
Currently when runing under KVM on ppc, we synchronize a certain number of
vital SPRs to KVM through the SET_SREGS call. This leaves out quite a lot
of important SPRs which are maintained in KVM. It would be helpful to
have their contents in qemu for debugging purposes, and when we implement
migration it will be vital, since they include important guest state that
will need to be restored on the target.
This patch sets up for synchronization of any registers supported by the
KVM ONE_REG calls. A new variant on spr_register() allows a ONE_REG id to
be stored with the SPR information. When we set/get information to KVM
we also synchronize any SPRs so registered.
For now we set this mechanism up to synchronize a handful of important
registers that already have ONE_REG IDs, notably the DAR and DSISR.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
Fabien Chouteau [Tue, 19 Feb 2013 04:41:11 +0000 (04:41 +0000)]
Save memory allocation in the elf loader
The current elf loader uses too much memory. For example, I have a
executable with a bss section of 400 MB and I set the ram size to 512
MB. Qemu uses about 780MB of RAM (which is fine), but there's a peak at
1.6 GB during initialization (this is not fine).
This patch fixes two things:
1) do not allocate each elf program twice.
2) do not allocate memory for areas that are only zeros.
For this we need a new field in Rom: "datasize" which is the size of the
allocated data. If datasize is less than romsize, it means that the area
from datasize to romsize is filled with zeros.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Sun, 17 Feb 2013 23:16:51 +0000 (23:16 +0000)]
target-ppc: Change "POWER7" CPU alias
Let it resolve to v2.3 rather than v2.0.
Suggested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Sun, 17 Feb 2013 23:16:49 +0000 (23:16 +0000)]
target-ppc: Split model definitions out of translate_init.c
Now that model definitions only reference their parent type, model
definitions are independent of the family definitions and can be
compiled independently of TCG translation.
Keep all #if defined(TODO) code local to cpu-models.c.
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Sun, 17 Feb 2013 23:16:46 +0000 (23:16 +0000)]
target-ppc: Turn descriptive CPU family comments into device descriptions
This gets rid of some more overly long comments that have lost most of
their purpose now that in most cases there's only two functions left per
CPU family.
The class field is inherited by the actual CPU models, so override it.
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Sun, 17 Feb 2013 23:16:44 +0000 (23:16 +0000)]
target-ppc: Register all types for TARGET_PPCEMB
Don't attempt to suppress registration of CPU types, since the criteria
is actually a property of the class and should thus become a field.
Since we can't check a field set in a class_init function before
registering the type that leads to execution of that function, guard the
-cpu class lookup instead and suppress exposing these classes in -cpu ?
and in QMP.
In case someone tries to hot-add an incompatible CPU via device_add,
error out in realize.
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Sun, 17 Feb 2013 23:16:41 +0000 (23:16 +0000)]
target-ppc: Convert CPU definitions
Turn the array of model definitions into a set of self-registering QOM
types with their own class_init. Unique identifiers are obtained from
the combination of PVR, SVR and family identifiers; this requires all
alias #defines to be removed from the list. Possibly there are some more
left after this commit that are not currently being compiled.
Prepares for introducing abstract intermediate CPU types for families.
Keep the right-aligned macro line breaks within 78 chars to aid
three-way merges.
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
Andreas Färber [Sun, 17 Feb 2013 23:16:04 +0000 (23:16 +0000)]
target-ppc: Extract aliases from definitions list
Move definitions that were 100% identical except for the name into a
list of aliases so that we don't register duplicate CPU types.
Drop the accompanying comments since they don't really add value.
We need to support recursive lookup due to code names referencing a
generic name referencing a specific model revision.
List aliases separately for -cpu ?.
Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
projects / qemu-upstream-4.5-testing.git / log