Currently named as hypervObjecUnified to keep code
compilable/functional until all bits are in place.
This struct is a result of unserializing WMI request response.
Therefore, it needs to be able to deal with different "versions" of the
same WMI class. To accomplish this, the "data" member was turned in to
a union which:
* has a "common" member that contains only WMI class fields that are
safe to access and are present in all "versions". This is ensured by
the code generator that takes care of proper struct memory alignment
between "common", "v1", "v2" etc members. This memeber is to be used
by the driver code wherever the API implementation can be shared for
all supported hyper-v versions.
* the "v1" and "v2" member can be used by the driver code to handle
version specific cases.
Example:
Msvm_ComputerSystem *vm = NULL;
...
hypervGetVirtualMachineList(priv, wqlQuery, *vm);
...
/* safe for "v1" and "v2" */
char *vmName = vm->data.common->Name;
/* or if one really needs special handling for "v2" */
if (priv->wmiVersion == HYPERV_WMI_VERSION_V2) {
char *foo = vm->data.v2->SomeV2OnlyField;
}
In other words, driver should not concern itself with existence of "v1"
or "v2" of WMI class unless absolutely necessary.
This struct is to be used to carry all the information necessary to
issue wsman requests for given WMI class. Those will be defined by the
generator code (as lists) so that they are handy for the driver code to
"extract" needed info depending on which hyper-v we're connected to.
For example:
Hyper-V 2012+ uses a new "v2" version of Msvm_* WMI classes so we will
store that info in hypervPrivate so that it is easily accessbile in the
driver API callbacks and handled accordingly.
Add "bsd" to the list of format types to not checked during blkid
processing even though it supposedly knows the format - for some
(now unknown) reason it's returning partition table not found. So
let's just let PARTED handle "bsd" too.
Commit id 'a48c674fb' added a check for format types "dvh" and "pc98"
to use the parted print processing instead of using blkid processing
in order to validate the label on the disk was what is expected for
disk pool startup. However, commit id 'a4cb4a74f' really messed things
up by missing an else condition causing PARTEDFindLabel to always
return DIFFERENT.
This new API is supposed to reset all migration parameters to make sure
future migrations won't accidentally use them. This patch makes the
first step and moves qemuMigrationResetTLS call inside
qemuMigrationReset.
Migration parameters are either reset by the main migration code path or
from qemuProcessRecoverMigration* in case libvirtd is restarted during
migration.
Finished qemuMigrationRun does not mean the migration itself finished
(it might have just switched to post-copy mode). While resetting TLS
parameters is probably OK at this point even if migration is still
running, we want to consolidate the code which resets various migration
parameters. Thus qemuMigrationResetTLS will be called from the Confirm
phase (or at the end of the Perform phase in case of v2 protocol), when
migration is either canceled or finished.
qemu: Properly reset TLS in qemuProcessRecoverMigrationIn
There is no async job running when a freshly started libvirtd is trying
to recover from an interrupted incoming migration. While at it, let's
call qemuMigrationResetTLS every time we don't kill the domain. This is
not strictly necessary since TLS is not supported when v2 migration
protocol is used, but doing so makes more sense.
Jiri Denemark [Wed, 29 Mar 2017 12:45:44 +0000 (14:45 +0200)]
cpu: Introduce virCPUCopyMigratable
This new internal API makes a copy of virCPUDef while removing all
features which would block migration. It uses cpu_map.xml as a database
of such features, which should only be used as a fallback when we cannot
get the data from a hypervisor. The main goal of this API is to decouple
this filtering from virCPUUpdate so that the hypervisor driver can
filter the features according to the hypervisor.
We want to ignore all files except *.pl in build-aux directory, however
the unignore pattern "!/build-aux/*.pl" doesn't have any effect because
a previous "/build-aux/" pattern ignores the directory itself rather
than individual files in it.
If formatting NUMA topology fails, the function returns immediatelly,
but the buffer structure allocated on the stack references lot of
heap-allocated memory and that would get lost in such case.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
qemu: Fix regression when hyperv/vendor_id feature is used
qemuProcessVerifyHypervFeatures is supposed to check whether all
requested hyperv features were actually honored by QEMU/KVM. This is
done by checking the corresponding CPUID bits reported by the virtual
CPU. In other words, it doesn't work for string properties, such as
VIR_DOMAIN_HYPERV_VENDOR_ID (there is no CPUID bit we could check). We
could theoretically check all 96 bits corresponding to the vendor
string, but luckily we don't have to check the feature at all. If QEMU
is too old to support hyperv features, the domain won't even start.
Otherwise, it is always supported.
Without this patch, libvirt refuses to start a domain which contains
reporting internal error: "unknown CPU feature __kvm_hv_vendor_id.
This regression was introduced by commit v3.1.0-186-ge9dbe7011, which
(by fixing the virCPUDataCheckFeature condition in
qemuProcessVerifyHypervFeatures) revealed an old bug in the feature
verification code. It's been there ever since the verification was
implemented by commit v1.3.3-rc1-5-g95bbe4bf5, which effectively did not
check VIR_DOMAIN_HYPERV_VENDOR_ID at all.
This header file has been created so that we can expose
internal functions to the test suite without making them
public: those in qemu_capabilities.h bearing the comment
qemu: Fix VPATH syntax-check for qemuSecurity wrappers enforcment
Fixing make syntax-check broken by commit 4da534c0b9.
Signed-off-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Reviewed-by: Bjoern Walk <bwalk@linux.vnet.ibm.com>
This function runs an iscsi command and parses its output.
However, due to the nature of things, virISCSIExtractSession()
callback can be called multiple times. In each run it would
allocate new memory and overwrite the variable where we keep
pointer to it and thus leaking old allocations.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Even though the virMacMap object is not necessarily created at
the same time as the network object, the former makes no sense
without the latter and thus should be unref'd in the network
object dispose function.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Imagine that this function is called twice over the same disk
source. While in the first run all allocated memory is freed, not
all pointers are set to NULL (e.g. def->srcpool). So when called
again, these poitners are freed again resulting in double free.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Peter Krempa [Thu, 30 Mar 2017 11:18:43 +0000 (13:18 +0200)]
storage: gluster: Implement 'checkPool' method so that state is restored
After restart of libvirtd the 'checkPool' method is supposed to validate
that the pool is online. Since libvirt then refreshes the pool contents
anyways just return whether the pool was supposed to be online so that
the code can be reached. This is necessary since if a pool does not
implement the method it's automatically considered as inactive.
Peter Krempa [Wed, 5 Apr 2017 07:51:51 +0000 (09:51 +0200)]
docs: Move news.rng out of docs/schemas
docs/schemas directory is meant for schemas which are installed on the
system. The schema for the news file does not need to be installed.
Store it along with the file it describes for simplicity.
Peter Krempa [Thu, 30 Mar 2017 13:08:06 +0000 (15:08 +0200)]
storage: util: Pass pool type to virStorageBackendFindGlusterPoolSources
The native gluster pool source list data differs from the data used for
attaching gluster volumes as netfs pools. Currently the only difference
was the format. Since native pools don't use it and later there will be
more differences add a more deterministic way to switch between the
types instead.
Ján Tomko [Tue, 4 Apr 2017 10:51:47 +0000 (12:51 +0200)]
util: ignore -Wcast-align in virNetlinkDumpCommand
Similar to commit b202c39 ignore the warning that breaks the build
with clang:
util/virnetlink.c:365:52: error: cast from 'char *' to 'struct nlmsghdr *'
increases required alignment from 1 to 4 [-Werror,-Wcast-align]
for (msg = resp; NLMSG_OK(msg, len); msg = NLMSG_NEXT(msg, len)) {
^~~~~~~~~~~~~~~~~~~~
/usr/include/linux/netlink.h:87:7: note: expanded from macro 'NLMSG_NEXT'
(struct nlmsghdr*)(((char*)(nlh)) + NLMSG_ALIGN((nlh)->nlmsg_len)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Peter Krempa [Fri, 31 Mar 2017 11:02:14 +0000 (13:02 +0200)]
qemu: hotplug: Iterate over vcpu 0 in individual vcpu hotplug code
Buggy condition meant that vcpu0 would not be iterated in the checks.
Since it's not hotpluggable anyways we would not be able to break the
configuration of a live VM.
The 'capacity' value (e.g. guest logical size) for a LUKS volume is
smaller than the 'physical' value of the file in the file system, so
we need to account for that.
When peeking at the encryption information about the volume add a fetch
of the payload_offset which is described as the offset to the start of
the volume data (in 512 byte sectors) in QEMU's QCryptoBlockLUKSHeader.
Then adjust the ->capacity appropriately when we determine that the
volume target encryption has a payload_offset value.
Cédric Bosdonnat [Tue, 28 Mar 2017 14:00:24 +0000 (16:00 +0200)]
virNetDevIPCheckIPv6ForwardingCallback fixes
Add check for more than one RTA_OIF, even though this is rather
unlikely.
Get rid of the buggy switch / break as this code won't need to
handle more attributes.
Use VIR_WARNINGS_NO_CAST_ALIGN to fix impossible to fix
util/virnetdevip.c:560:17: error: cast increases required alignment of target type [-Werror=cast-align]
Depending on the architecture, requirements for ACPI and UEFI can
be different; more specifically, while on x86 UEFI requires ACPI,
on aarch64 it's the other way around.
Enforce these requirements when validating the domain, and make
the error message more accurate by mentioning that they're not
necessarily applicable to all architectures.
Several aarch64 test cases had to be tweaked because they would
have failed the validation step otherwise.
Andrea Bolognani [Thu, 30 Mar 2017 12:33:54 +0000 (14:33 +0200)]
qemu: Remove redundant capabilities
Now that the NO_ACPI and NO_HPET capabilities are set
automatically by virQEMUCapsInitQMPBasicArch() if
appropriate for the architecture, they shouldn't be
used manually to avoid masking bugs.
The capabilities used in test cases should match those used
during normal operation for the tests to make any sense.
This results in the generated command line for a few test
cases (most notably non-x86 test cases that were wrongly
assuming they could use -no-acpi) changing.
Andrea Bolognani [Mon, 27 Mar 2017 14:42:17 +0000 (16:42 +0200)]
qemu: Split virQEMUCapsInitArchQMPBasic()
Instead of having a single function that probes the
architecture from the monitor and then sets a bunch of
basic capabilities based on it, have a separate function
for each part: virQEMUCapsInitQMPArch() only sets the
architecture, and virQEMUCapsInitQMPBasicArch() only sets
the capabilities.
This split will be useful later on, when we will want to
set basic capabilities from the test suite without having
to go through the pain of mocking the monitor.
Andrea Bolognani [Tue, 28 Mar 2017 15:13:39 +0000 (17:13 +0200)]
news: Allow empty <section> elements
Creating dummy <change> elements was a workaround for the
HTML DTD not allowing empty <ul> elements, but we can do
better by tweaking the the XSLT stylesheet.
Andrea Bolognani [Tue, 28 Mar 2017 14:25:21 +0000 (16:25 +0200)]
news: Remove handling of random HTML tags
Now that the source file is validated against a schema that
only allows the <code> HTML tag to be used, we can rely on
that assumption to simplify our XSLT stylesheet.
Peter Krempa [Thu, 30 Mar 2017 11:47:45 +0000 (13:47 +0200)]
storage: driver: Remove unavailable transient pools after restart
If a transient storage pool is deemed inactive after libvirtd restart it
would not be deleted from the list. Reuse virStoragePoolUpdateInactive
along with a refactor necessary to properly update the state.
Peter Krempa [Thu, 30 Mar 2017 11:45:45 +0000 (13:45 +0200)]
storage: driver: Split out code fixing pool state after deactivation
After a pool is made inactive the definition objects need to be updated
(if a new definition is prepared) and transient pools need to be
completely removed. Split out the code doing these steps into a separate
function for later reuse.
Peter Krempa [Thu, 30 Mar 2017 08:13:36 +0000 (10:13 +0200)]
storage: backend: Use correct stringifier for pool type
When registering a storage poll backend, the code would use
virStorageTypeToString instead of virStoragePoolTypeToString. The
following message would be logged:
Peter Krempa [Tue, 28 Mar 2017 11:28:02 +0000 (13:28 +0200)]
tests: schema: Add possibility to validate individual files
Sometimes it may be desired to validate individual files against a
schema. Refactor the data structures to unify them and introduce a new
macro DO_TEST_FILE(schema, xmlfile) which will test the XML file against
the given schema file.
Michal Privoznik [Fri, 31 Mar 2017 13:59:54 +0000 (15:59 +0200)]
Introduce and use virDomainDiskEmptySource
Currently, if we want to zero out disk source (e,g, due to
startupPolicy when starting up a domain) we use
virDomainDiskSetSource(disk, NULL). This works well for file
based storage (storage type file, dir, or block). But it doesn't
work at all for other types like volume and network.
So imagine that you have a domain that has a CDROM configured
which source is a volume from an inactive pool. Because it is
startupPolicy='optional', the CDROM is empty when the domain
starts. However, the source element is not cleared out in the
status XML and thus when the daemon restarts and tries to
reconnect to the domain it refreshes the disks (which fails - the
storage pool is still not running) and thus the domain is killed.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 22 Mar 2017 10:07:56 +0000 (11:07 +0100)]
networkUpdateState: Create virMacMap module more frequently
The virMacMap module is there for dumping [domain, <list of is
MACs>] pairs into a file so that libvirt_guest NSS module can use
it. Whenever a interface is allocated from network (e.g. on
domain<F2> startup or NIC hotplug), network is notified and so is
virMacMap module subsequently. The module update functions
networkMacMgrAdd() and networkMacMgrDel() gracefully handle the
case when there's no module. The problem is, the module is
created if and only if network is freshly started, or if the
daemon restarts and network previously had the module.
This is not very user friendly - if users want to use the NSS
module they need to destroy their network and bring it up again
(and subsequently all the domains using it).
One disadvantage of this approach implemented here is that one
may get just partial results: any already running network does
not record mac maps, thus only newly plugged domains will be
stored in the module. The network restart scenario is not touched
by this of course. But one can argue that older libvirts had
never recorded the mac maps anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Erik Skultety [Fri, 31 Mar 2017 08:05:08 +0000 (10:05 +0200)]
admin: Throw a system error when 'open' fails on user-provided output
There was an unhandled 'open' call which resulted in:
"error: Library function returned error but did not set virError"
Even if this happens during the daemon's start when we still don't have
any set of outputs defined yet, we can safely report an error, since we
automatically fallback to stderr which is fine even for both
running as a daemonized process, since this happens before the daemon
forks into the background, and running as a systemd service, since
systemd re-directs std outputs to journald by default.
Peter Krempa [Fri, 31 Mar 2017 07:48:42 +0000 (09:48 +0200)]
news: Add template for a <release> section
After the release it's necessary to add a new <release> section for the
upcoming release. Add a template so that it does not have to be
compiled over and over again.
In 9e2465834 a check that denies internal snapshots when pflash
based loader is configured for the domain. However, if there's
none and an user tries to do an internal snapshot they will
witness daemon crash as in that case vm->def->os.loader is NULL
and we dereference it unconditionally.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Jiri Denemark [Wed, 29 Mar 2017 09:00:32 +0000 (11:00 +0200)]
qemu: Check non-migratable host CPU features
CPU features which change their value from disabled to enabled between
two calls to query-cpu-model-expansion (the first with no extra
properties set and the second with 'migratable' property set to false)
can be marked as enabled and non-migratable in qemuMonitorCPUModelInfo.
Since the code consuming qemuMonitorCPUModelInfo currently ignores the
migratable flag, this change is effectively changing the CPU model
advertised in domain capabilities to contain all features (even those
which block migration). And this matches what we do for QEMU older than
2.9.0, when we detect all CPUID bits ourselves without asking QEMU.
Jiri Denemark [Wed, 29 Mar 2017 08:58:41 +0000 (10:58 +0200)]
qemu: Check migratable host CPU features
If calling query-cpu-model-expansion on the 'host'/'max' CPU model with
'migratable' property set to false succeeds, we know QEMU is able to
tell us which features would disable migration. Thus we can mark all
enabled features as migratable.
Jiri Denemark [Wed, 29 Mar 2017 08:33:08 +0000 (10:33 +0200)]
qemuMonitorCPUModelInfo: Add support for non-migratable features
QEMU is able to tell us whether a CPU feature would block migration or
not. This patch adds support for storing such features in
qemuMonitorCPUModelInfo.
Peter Krempa [Wed, 29 Mar 2017 14:56:05 +0000 (16:56 +0200)]
qemu: domain: Properly lookup top of chain in qemuDomainGetStorageSourceByDevstr
When idx is 0 virStorageFileChainLookup returns the base (bottom) of the
backing chain rather than the top. This is expected by the callers of
qemuDomainGetStorageSourceByDevstr.
Ján Tomko [Tue, 28 Mar 2017 13:07:50 +0000 (15:07 +0200)]
schema: do not require name for certain pool types
Pool types that have the VIR_STORAGE_POOL_SOURCE_NAME flag set
allow omitting the <name> element and instead fill out the pool name
from the <source><name> element.
Relax the schema to make <name> optional for these pools.
Expressing that at least one of these is required is out of scope
of the schema.
Michal Privoznik [Tue, 28 Mar 2017 13:47:42 +0000 (15:47 +0200)]
qemuDomainGetStats: Copy domain ID too
One of the problems with our virGetDomain function is that it
copies just domain name and domain UUID. Therefore it's very
easy to forget aboud domain ID. This can cause some bugs, like
virConnectGetAllDomainStats not reporting proper domain IDs.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
projects / libvirt.git / log