Ed Maste [Wed, 27 Oct 2021 20:45:35 +0000 (16:45 -0400)]
ssh: disble internal security key support in generated config.h
We want to set ENABLE_SK_INTERNAL only when building with USB support.
We'll leave it off in config.h and enble it via our bespoke build's
Makefile.inc.
John Baldwin [Mon, 1 Nov 2021 18:28:10 +0000 (11:28 -0700)]
ktls: Add simple transmit tests of kernel TLS.
Note that these tests test the kernel TLS functionality directly.
Rather than using OpenSSL to perform negotiation and generate keys,
these tests generate random keys send data over a pair of TCP sockets
manually decrypting the TLS records generated by the kernel.
Marius Halden [Sun, 31 Oct 2021 20:18:42 +0000 (21:18 +0100)]
carp: deal with negative net.inet.carp.demotion
Given nodes 1 and 2, where node 1 has an advskew of 0 and node 2 has an
advskew of 100, making them master and backup respectively.
If net.inet.carp.demotion is set to a negative value on node 1, node 2
might become master while node 1 still retains it master status. Wether
or not node 2 becomes master seems to depend on the nodes advskew and
what the demotion sysctl was set to on node 1.
The reason for node 2 becoming master seems to be that the calculated
advskew taking demotion into account is truncated to a single unsigned
byte when copied into the carp header for sending, and node 1 stays
master since it takes uses the whole non-truncated calculated advskew
when deciding wether to stay master.
Mark Johnston [Mon, 1 Nov 2021 13:27:52 +0000 (09:27 -0400)]
uma: Fix handling of reserves in zone_import()
Kegs with no items reserved have uk_reserve = 0. So the check
keg->uk_reserve >= dom->ud_free_items will be true once all slabs are
depleted. Then, rather than go and allocate a fresh slab, we return to
the cache layer.
The intent was to do this only when the keg actually has a reserve, so
modify the check to verify this first. Another approach would be to
make uk_reserve signed and set it to -1 until uma_zone_reserve() is
called, but this requires a few casts elsewhere.
Fixes: 1b2dcc8c54a8 ("uma: Avoid depleting keg reserves when filling a bucket")
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32516
Mark Johnston [Mon, 1 Nov 2021 13:27:35 +0000 (09:27 -0400)]
uma: Improve M_USE_RESERVE handling in keg_fetch_slab()
M_USE_RESERVE is used in a couple of places in the VM to avoid unbounded
recursion when the direct map is not available, as is the case on 32-bit
platforms or when certain kernel sanitizers (KASAN and KMSAN) are
enabled. For example, to allocate KVA, the kernel might allocate a
kernel map entry, which might require a new slab, which requires KVA.
For these zones, we use uma_prealloc() to populate a reserve of items,
and then in certain serialized contexts M_USE_RESERVE can be used to
guarantee a successful allocation. uma_prealloc() allocates the
requested number of items, distributing them evenly among NUMA domains.
Thus, in a first-touch zone, to satisfy an M_USE_RESERVE allocation we
might have to check the slab lists of other domains than the current one
to provide the semantics expected by consumers.
So, try harder to find an item if M_USE_RESERVE is specified and the keg
doesn't have anything for current (first-touch) domain. Specifically,
fall back to a round-robin slab allocation. This change fixes boot-time
panics on NUMA systems with KASAN or KMSAN enabled.[1]
Alternately we could have uma_prealloc() allocate the requested number
of items for each domain, but for some existing consumers this would be
quite wasteful. In general I think keg_fetch_slab() should try harder
to find free slabs in other domains before trying to allocate fresh
ones, but let's limit this to M_USE_RESERVE for now.
Also fix a separate problem that I noticed: in a non-round-robin slab
allocation with M_WAITOK, rather than sleeping after a failed slab
allocation we simply try again. Call vm_wait_domain() before retrying.
Reported by: mjg, tuexen [1]
Reviewed by: alc
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32515
Andrew Turner [Mon, 1 Nov 2021 11:19:57 +0000 (11:19 +0000)]
Print the correct register for the arm64 elr
In 7ec86b6609912 ("Also print symbols when printing arm64 registers")
a new function was created to print most registers. Unfortunately the
Link Register (LR) was being printed when we should have printed the
Exception Link Register (ELR).
Steve Kargl [Sun, 31 Oct 2021 22:26:20 +0000 (00:26 +0200)]
sinpi[fl] etc: Fix the ld128 implementations
Mark Murray graciously provided access to an aarch64 system
to test the ld128 implementations. This patch address
* Misuses of copysignl() in sinpil() and tanpil().
* Redo the splitting of argument 'x' into an integer part and
remainder. The remainder must satify 0 <= r < 1.
* Update the reduction of the integer part to something that can
easily be seen as even or odd, e.g., sin(pi*x) = (-1)^n*sin(pi*r)
with n <= 2^112 and we an reduce n by subtracting integer powers
of 2.
* In s_cospil.c, fix typos where 'x' is used where 'ax', the
remainder, is required.
* In tanpil(), fix the use of an uninitialized variable, ax = fabsl(ax),
ax should be x in fabsl().
One item of note, in the limited tested on aarch64, the max ULP
for sinpil() and cospil() were less than 1.1 ULP, which is higher
that the desired max ULP less than 1. This was traced to the
kernel for cosl() in the fundamental interval [0,pi/4].
The coefficients in the minmax polynomial likely need refinement.
Rick Macklem [Sun, 31 Oct 2021 23:31:31 +0000 (16:31 -0700)]
nfscl: Do pNFS layout return_on_close synchronously
For pNFS servers that specify that Layouts are to be returned
upon close, they may expect that LayoutReturn to happen before
the associated Close.
This patch modifies the NFSv4.1/4.2 pNFS client so that this
is done. This only affects a pNFS mount against a non-FreeBSD
NFSv4.1/4.2 server that specifies return_on_close in LayoutGet
replies.
Found during a recent IETF NFSv4 working group testing event.
Rick Macklem [Sun, 31 Oct 2021 00:08:28 +0000 (17:08 -0700)]
nfscl: Add setting n_localmodtime to the Write RPC code
Similar to commit 2be417843a, I believe there could be a race between
the NFS client VOP_LOOKUP() and file Writing that could result in stale
file attributes being loaded into the NFS vnode by VOP_LOOKUP().
I have not been able to reproduce a failure due to this race, but
I believe that there are two possibilities:
The Lookup RPC happens while VOP_WRITE() is being executed and loads
stale file attributes after VOP_WRITE() returns when it has already
completed the Write/Commit RPC(s).
--> For this case, setting the local modify timestamp at the end of
VOP_WRITE() should ensure that stale file attributes are not loaded.
The Lookup RPC occurs after VOP_WRITE() has returned, while
asynchronous Write/Commit RPCs are in progress and then is
blocked by the vnode held by VOP_OPEN/VOP_CLOSE/VOP_FSYNC which
will flush writes via ncl_flush() or ncl_vinvalbuf(), clearing the
NMODIFIED flag (which indicates Writes-in-progress). The VOP_LOOKUP()
then acquires the NFS vnode lock and fills in stale file attributes.
--> Setting the local modify timestamp in ncl_flsuh() and ncl_vinvalbuf()
when they clear NMODIFIED should ensure that stale file attributes
are not loaded.
Rick Macklem [Sat, 30 Oct 2021 23:46:14 +0000 (16:46 -0700)]
nfscl: Set n_localmodtime in Deallocate
Commit 2be417843a04 added n_localmodtime, which is used by Lookup
and ReaddirPlus to check to see if the file attributes in an RPC
reply might be stale. This patch sets n_localmodtime in Deallocate.
Done as a separate commit, since Deallocate is not in stable/13.
Rick Macklem [Sat, 30 Oct 2021 23:35:02 +0000 (16:35 -0700)]
PR#259071 provides a test program that fails for the NFS client.
Testing with it, there appears to be a race between Lookup
and VOPs like Setattr-of-size, where Lookup ends up loading
stale attributes (including what might be the wrong file size)
into the NFS vnode's attribute cache.
The race occurs when the modifying VOP (which holds a lock
on the vnode), blocks the acquisition of the vnode in Lookup,
after the RPC (with now potentially stale attributes).
Here's what seems to happen:
Child Parent
does stat(), which does
VOP_LOOKUP(), doing the Lookup
RPC with the directory vnode
locked, acquiring file attributes
valid at this point in time
blocks waiting for locked file does ftruncate(), which
vnode does VOP_SETATTR() of Size,
changing the file's size
while holding an exclusive
lock on the file's vnode
releases the vnode lock
acquires file vnode and fills in
now stale attributes including
the old wrong Size
does a read() which returns
wrong data size
This patch fixes the problem by saving a timestamp in the NFS vnode
in the VOPs that modify the file (Setattr-of-size, Allocate).
Then lookup/readdirplus compares that timestamp with the time just
before starting the RPC after it has acquired the file's vnode.
If the modifying RPC occurred during the Lookup, the attributes
in the RPC reply are discarded, since they might be stale.
With this patch the test program works as expected.
Note that the test program does not fail on a July stable/12,
although this race is in the NFS client code. I suspect a
fairly recent change to the name caching code exposed this
bug.
linux: Add additional ptracestop only if the debugger is Linux
In 6e66030c4c0, additional ptracestop was added in order
to implement PTRACE_EVENT_EXEC. Make it only apply to cases
where the debugger is a Linux processes; native FreeBSD
debuggers can trace Linux processes too, but they don't
expect that additonal ptracestop.
Rick Macklem [Sat, 30 Oct 2021 03:35:02 +0000 (20:35 -0700)]
nfscl: Use NFSMNTP_DELEGISSUED in two more functions
Commit 5e5ca4c8fc53 added a NFSMNTP_DELEGISSUED flag to indicate when
a delegation has been issued to the mount. For the common case
where an NFSv4 server is not issuing delegations, this flag
can be checked to avoid acquisition of the NFSCLSTATEMUTEX.
This patch adds checks for NFSMNTP_DELEGISSUED being set
to two more functions.
This change appears to be performance neutral for a small number
of opens, but should reduce lock contention for a large number of opens
for the common case where server is not issuing delegations.
Randall Stewart [Fri, 29 Oct 2021 21:37:49 +0000 (17:37 -0400)]
tcp: Rack might retransmit forever.
If we get a Sacked peer with an MTU change we can retransmit forever if the
last bytes are sacked and the client goes away (think power off). Then we
never see the end condition and continually retransmit.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D32671
Ed Maste [Fri, 29 Oct 2021 00:49:12 +0000 (20:49 -0400)]
Don't build sanitizer runtimes under WITHOUT_CXX
In the past we built the sanitizer runtimes when building Clang
(and using Clang as the compiler) but 7676b388adbc changed this to
be conditional only on using Clang, to make the runtimes available
for external Clang.
They fail to build when WITHOUT_CXX is set though, so add MK_CXX
as part of the condition.
Reported by: Michael Dexter, Build Option Survey
Reviewed by: imp, jrtc27
Fixes: 7676b388adbc ("Always build the sanitizer runtimes...")
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D32731
The pic_* interface was used.
Only edge interrupts are supported by this controller.
Driver mutex had to be converted to a spin lock so that it can
be used in the interrupt filter context.
Two types of intr_map_data are supported - INTR_MAP_DATA_GPIO and
INTR_MAP_DATA_FDT. This way interrupts can be allocated using the
userspace gpio interrupt allocation method, as well as directly from
simplebus. The latter can be used by devices that have its irq routed
to a GPIO pin.
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential revision: https://reviews.freebsd.org/D32587
Kornel Duleba [Mon, 25 Oct 2021 13:18:27 +0000 (15:18 +0200)]
felix: Add a sysctl to control timer routine frequency
Driver polls status of all PHYs connected to the switch in a
fixed interval.
Add a sysctl that allows to control frequency of that.
The value is expressed in ticks and defaults to "hz", or 1 second.
Obtained from: Semihalf
Sponsored by: Alstom Group
Kornel Duleba [Tue, 26 Oct 2021 08:36:35 +0000 (10:36 +0200)]
felix: Use internal MDIO regs for PHY communication
Previously we would use an external MDIO device found on the PCI bus.
Switch to using MDIO mapped in a separate BAR of the switch device.
It is much easier this way since we don't have to depend on another
driver anymore.
Obtained from: Semihalf
Sponsored by: Alstom Group
Kornel Duleba [Thu, 21 Oct 2021 14:02:26 +0000 (16:02 +0200)]
dmar: Disable protected memory regions after initialization
Some BIOSes protect memory region they reside in by using DMAR to
prevent devices from doing any DMA transactions to that part of RAM.
AMI refers to this as "DMA Control Guarantee".
Disable the protection when address translation is enabled.
I stumbled upon this while investigation a failing coredump on a device
which has this feature enabled.
Kornel Duleba [Thu, 21 Oct 2021 12:46:51 +0000 (14:46 +0200)]
dmar: Don't try to reserve PCI regions for non-existing devices
In some cases we might have to create DMAR context before the
corresponding device has been enumerated by the PCI bus.
In that case we get called with NULL dev, because of that trying
to reserve PCI regions causes a NULL pointer dereference in
pci_find_pcie_root_port.
Randall Stewart [Fri, 29 Oct 2021 07:17:43 +0000 (03:17 -0400)]
tcp: Rack at times can miscalculate the RTT from what it thinks is a persists probe respone.
Turns out that if a peer sends in a window update right after rack fires off
a persists probe, we can mis-interpret the window update and calculate
a bogus RTT (very short). We still process the window update and send
the data but we incorrectly generate an RTT. We should be only doing
the RTT stuff if the rwnd is still small and has not changed.
Reviewed by: Michael Tuexen
Sponsored by: Netflix Inc.
Differential Revision: https://reviews.freebsd.org/D32717
Kirk McKusick [Fri, 29 Oct 2021 05:49:48 +0000 (22:49 -0700)]
Allow GEOM utilities to specify a -v option.
Geom utilities (geli(8), glabel(8), gmirror(8), gpart(8), gmirror(8),
gmountver(8), etc) all use the geom(8) utility as their back end
to process their commands and pass them into the kernel. Creating
a new utility requires no more than filling out a template describing
the commands and arguments that the utility supports. Consider the
specification for the very simple gmountver(8) utility:
It has just two commands of its own: "create" and "destroy" along
with the four standard commands "list", "status", "load", and
"unload" provided by the base geom(8) utility. The base geom(8)
utility allows each command to use the G_FLAG_VERBOSE flag to specify
that a command should accept the -v flag and when the -v flag is
given the utility prints "Done." if the command completes successfully.
In the above example, both of the commands set the G_FLAG_VERBOSE,
so have the -v option available. In addition the "destroy" command
accepts the -f boolean flag to force the destruction.
If the "destroy" command wanted to also print out verbose information,
it would need to explicitly declare its intent by adding a line:
{ 'v', "verbose", NULL, G_TYPE_BOOL },
Before this change, the geom utility would silently ignore the above
line in the configuration file, so it was impossible for the utility
to know that the -v flag had been set on the command. With this
change a geom command can explicitly specify a -v option with a
line as given above and handle it as it would any other option. If
both a -v option and G_FLAG_VERBOSE are specified for a command
then both types of verbose information will be output when that
command is run with -v.
Sebastian Huber [Thu, 28 Oct 2021 08:22:58 +0000 (10:22 +0200)]
kern_tc.c: Scaling/large delta recalculation
This change is a slight performance optimization for systems with a slow
64-bit division.
The th->th_scale and th->th_large_delta values only depend on the
timecounter frequency and the th->th_adjustment. The timecounter
frequency of a timehand only changes when a new timecounter is activated
for the timehand. The th->th_adjustment is only changed by the NTP
second update. The NTP second update is not done for every call of
tc_windup().
Move the code block to recalculate the scaling factor and
the large delta of a timehand to the new helper function
recalculate_scaling_factor_and_large_delta().
Call recalculate_scaling_factor_and_large_delta() when a new timecounter
is activated and a NTP second update occurred.
Felix Johnson [Thu, 28 Oct 2021 18:15:08 +0000 (14:15 -0400)]
config(5): Update upper limit for maxusers on 64-bit systems
The limit of 384 maxusers for auto configuration was only imposed on
32-bit systems. Document that maxusers scales above 384 based on memory
for 64-bit systems.
PR: 204938
MFC after: 3 days
Reported by: David Höppner <0xffea@gmail.com>
exec: store parent directory and hardlink name of the binary in struct proc
While doing it, also move all the code to resolve pathnames and obtain
text vp and dvp, into single place. Besides simplifying the code, it
avoids spurious vnode relocks and validates the explanation why
a transient text reference on the script vnode is not harmful.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32611
For this, use vn_fullpath_hardlink() to resolve executable name for
execve(2).
This should provide the right hardlink name, used for execution, instead
of random hardlink pointing to this binary. Also this should make the
AT_EXECNAME reliable for execve(2), since kernel only needs to resolve
parent directory path, which should always succeed (except pathological
cases like unlinking a directory).
PR: 248184
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D32611
This change makes ident only dependant on libc functions
This makes our ident(1) more portable, also the fact that we only
depend on libc which is maintained with excellent backward compatibility
means that if one day ident is removed from base, someone using FreeBSD
22 will be able to fetch ident from FreeBSD 14 to run ident against
FreeBSD 1.0 binary
Kristof Provost [Tue, 26 Oct 2021 07:59:42 +0000 (09:59 +0200)]
pf: fix dummynet + NAT
Dummynet differs from ALTQ in that ALTQ schedules packets after they
leave pf. Dummynet schedules them after they leave pf, but then
re-injects them.
We currently deal with this by ensuring we don't re-schedule a packet we
get from dummynet, but this produces unexpected results when combined
with NAT, as dummynet processing is done after the NAT transformation.
In other words, the second time the packet is handed to pf it may have a
different source and destination address.
Simplify this by moving dummynet processing to after all other pf
processing, and not re-processing (but always passing) packets from
dummynet.
This fixes NAT of dummynet delayed packets, and also reduces processing
overhead (because we only do state/rule lookup for each dummynet packet
once, rather than twice).
Kristof Provost [Tue, 26 Oct 2021 07:51:33 +0000 (09:51 +0200)]
mbuf: PACKET_TAG_PF should not be persistent
We should clear firewall tags on loopback, icmp reflection, or if_epair
transmission. Left over tags can produce unexpected behaviour,
especially on if_epair where a and b interfaces can be in different
vnets, and have different firewall policies set.
Kristof Provost [Tue, 26 Oct 2021 07:57:56 +0000 (09:57 +0200)]
if_epair: delete mbuf tags
Remove all (non-persistent) tags when we transmit a packet. Real network
interfaces do not carry any tags either, and leaving tags attached can
produce unexpected results.
Jessica Clarke [Thu, 28 Oct 2021 00:01:00 +0000 (01:01 +0100)]
Fix off-by-one error in msdosfs FAT32 volume label copying
I dropped the + 1 from the other two instances in each file but failed
to do so for this one, resulting in a more egregious buffer overread
than the one I was fixing (since the read character ended up in the
output if there was space).
John Baldwin [Wed, 27 Oct 2021 23:35:56 +0000 (16:35 -0700)]
ktls: Fix assertion for TLS 1.0 CBC when using non-zero starting seqno.
The starting sequence number used to verify that TLS 1.0 CBC records
are encrypted in-order in the OCF layer was always set to 0 and not to
the initial sequence number from the struct tls_enable.
In practice, OpenSSL always starts TLS transmit offload with a
sequence number of zero, so this only matters for tests that use a
random starting sequence number.
Jessica Clarke [Sun, 24 Oct 2021 18:49:21 +0000 (19:49 +0100)]
Fix intra-object buffer overread for labeled msdosfs volumes
Volume labels, like directory entries, are padded with spaces and so
have no NUL terminator. Whilst the MIN for the dsize argument to strlcpy
ensures that the copy does not overflow the destination, strlcpy is
defined to return the number of characters in the source string,
regardless of the provided dsize, and so keeps reading until it finds a
NUL, which likely exists somewhere within the following fields, but On
CHERI with the subobject bounds enabled in the compiler this buffer
overread will be detected and trap with a bounds violation.
Found by: CHERI
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D32579
Jessica Clarke [Sun, 24 Oct 2021 18:48:59 +0000 (19:48 +0100)]
ada: Fix intra-object buffer overread of identify strings
In the ATA/ATAPI spec these are space-padded fixed-length strings with
no NUL-terminator (and byte swapped). When performing the identify we
call ata_param_fixup to swap the bytes back to be in order, strip any
leading/trailing spaces and coalesce consecutive spaces, padding with
NULs. However, if the input has no padding spaces, the fixed-up strings
are still not NUL-terminated. This causes two issues. The first is that
strlcpy will truncate the string by replacing the final byte with a NUL.
The second is that strlcpy will keep reading src until it finds a NUL in
order to calculate the return value, which is defined as the length of
src (so that callers can then compare it with the dsize input to see if
the input string was truncated), thereby reading past the end of the
buffer and into whatever adjacent fields are in the structure. In
practice there's a NUL byte somewhere in the structure, but on CHERI
with subobject bounds enabled in the compiler this overread will be
detected and trap as a bounds violation.
Note this matches ata_xpt's aprobedone, which does a bcopy to a
malloc'ed buffer and manually NUL-terminates it for the CAM path's
device's serial_num.
Found by: CHERI
Reviewed by: imp, scottl
Differential Revision: https://reviews.freebsd.org/D32567
Jessica Clarke [Sun, 24 Oct 2021 18:48:46 +0000 (19:48 +0100)]
xhci: Rework 64-byte context support to avoid pointer abuse
Currently, to support 64-byte contexts, xhci_ctx_[gs]et_le(32|64) take a
pointer to the field within a 32-byte context and, if 64-byte contexts
are in use, compute where the 64-byte context field is and use that
instead by deriving a pointer from the 32-byte field pointer. This is
done by exploiting a combination of 64-byte contexts being the same
layout as their 32-byte counterparts, just with 32 bytes of padding at
the end, and that all individual contexts are either in a device
context or an input context which itself is page-aligned. By masking out
the low 4 bits (which is the offset of the field within the 32-byte
contxt) of the offset within the page, the offset of the invididual
context within the containing device/input context can be determined,
which is itself 32 times the number of preceding contexts. Thus, adding
this value to the pointer again gets 64 times the number of preceding
contexts plus the field offset, which gives the offset of the 64-byte
context plus the field offset, which is the address of the field in the
64-byte context.
However, this involves a fair amount of lying to the compiler when
constructing these intermediate pointers, and is rather difficult to
reason about. In particular, this is problematic for CHERI, where we
compile the kernel with subobject bounds enabled; that is, unless
annotated to opt out (e.g. for C struct inheritance reasons where you
need to be able to downcast, or containerof idioms), a pointer to a
member of a struct is a capability whose bounds only cover that field,
and any attempt to dereference outside those bounds will fault,
protecting against intra-object buffer overflows. Thus the pointer given
to xhci_ctx_[gs]et_le(32|64) is a capability whose bounds only cover the
field in the 32-byte context, and computing the pointer to the 64-byte
context field takes the address out of bounds, resulting in a fault when
later dereferenced.
This can be cleaned up by using a different abstraction. Instead of
doing the 32-byte to 64-byte conversion on access to the field, we can
do the conversion when getting a pointer to the context itself, and
define proper 64-byte versions of contexts in order to let the compiler
do all the necessary arithmetic rather than do it manually ourselves.
This provides a cleaner implementation, works for CHERI and may even be
slightly more performant as it avoids the need to mess with masking
pointers (which cannot in the general case be optimised by compilers to
be reused across accesses to different fields within the same context,
since it does not know that the contexts are over-aligned compared with
the C ABI requirements).
Gleb Smirnoff [Tue, 26 Oct 2021 03:54:26 +0000 (20:54 -0700)]
rack: Update the fast send block on setsockopt(2)
Rack caches TCP/IP header for fast send, so it doesn't call
tcpip_fillheaders(). After certain socket option changes,
namely IPV6_TCLASS, IP_TOS and IP_TTL it needs to update
its fast block to be in sync with the inpcb.
Peter Lei [Tue, 26 Oct 2021 03:08:54 +0000 (20:08 -0700)]
tcp: socket option to get stack alias name
TCP stack sysctl nodes are currently inserted using the stack
name alias. Allow the user to get the current stack's alias to
allow for programatic sysctl access.
Alexey Dokuchaev [Sun, 11 Oct 2020 08:23:00 +0000 (08:23 +0000)]
crunchgen: use realpath(3) instead of ``pwd -P''
r366466 (9c7bd4f198e1) fixed a subtle bug by stripping the trailing
'\n' appended to the output of popen("cd %s && pwd -P", p->srcdir).
Replace this cumbersome implementation with a single realpath(3) call
which avoids spawning a shell, reading from the stream with fgets(3),
and final strdup(3).
projects / people / royger / freebsd.git / log