arm/{bcm2835,fsl-imx25,fsl-imx6}: Fix realize error API violations

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

bcm2835_peripherals_realize(), fsl_imx25_realize() and
fsl_imx6_realize() are wrong that way: they pass &err to
object_property_set_uint() and object_property_set_bool() without
checking it, and then to sysbus_realize().  Harmless, because the
former can't actually fail here.

Fix by passing &error_abort instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Baumann <Andrew.Baumann@microsoft.com>
Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com>
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-26-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

hw/arm/armsse: Fix armsse_realize() error API violation

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

armsse_realize() is wrong that way: it passes &err to
object_property_set_int() multiple times without checking it, and then
to sysbus_realize().  Harmless, because the former can't actually fail
here.

Fix by passing &error_abort instead.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-25-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

aspeed: Fix realize error API violation

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

aspeed_soc_ast2600_realize() and aspeed_soc_realize() are wrong that
way: they pass &err to object_property_set_int() and
object_property_set_bool() without checking it, and then to
sysbus_realize().  Harmless, because the former can't actually fail
here.

Fix by passing &error_abort instead.

Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-24-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

arm/stm32f205 arm/stm32f405: Fix realize error API violation

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

stm32f205_soc_realize() and stm32f405_soc_realize() are wrong that
way: they pass &err to object_property_set_int() without checking it,
and then to qdev_realize().  Harmless, because the former can't
actually fail here.

Fix by passing &error_abort instead.

Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630090351.1247703-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

amd_iommu: Fix amdvi_realize() error API violation

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

amdvi_realize() is wrong that way: it passes @errp to qdev_realize(),
object_property_get_int(), and msi_init() without checking it.  I
can't tell offhand whether qdev_realize() can fail here.  Fix by
checking it for failure.  object_property_get_int() can't.  Fix by
passing &error_abort instead.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-22-armbru@redhat.com>

x86: Fix x86_cpu_new() error handling

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

x86_cpu_new() is wrong that way: it passes &local_err to
object_property_set_uint() without checking it, and then to
qdev_realize().  If both fail, we'll trip error_setv()'s assertion.
To assess the bug's impact, we'd need to figure out how to make both
calls fail.  Too much work for ignorant me, sorry.

Fix by checking for failure right away.

Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-21-armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>

mips/cps: Fix mips_cps_realize() error API violations

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

mips_cps_realize() is wrong that way: it passes &err to multiple
object_property_set_FOO() without checking for failure, and then to
sysbus_realize().  Harmless, because the object_property_set_FOO()
can't actually fail here.

Fix by passing &error_abort instead.

Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-20-armbru@redhat.com>

riscv_hart: Fix riscv_harts_realize() error API violations

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

riscv_harts_realize() is wrong that way: it passes @errp to
riscv_hart_realize() in a loop.  I can't tell offhand whether this can
fail.

Fix by checking for failure in each iteration.

Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630090351.1247703-19-armbru@redhat.com>

riscv/sifive_u: Fix sifive_u_soc_realize() error API violations

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

sifive_u_soc_realize() is wrong that way: it passes &err to
sysbus_realize() four times before checking it.  Harmless, because the
first three can't actually fail (I think).

Fix by checking for failure right away.

Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Alistair Francis <Alistair.Francis@wdc.com>
Cc: Sagar Karandikar <sagark@eecs.berkeley.edu>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: qemu-riscv@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630090351.1247703-18-armbru@redhat.com>

hw/arm: Drop useless object_property_set_link() error handling

object_property_set_link() fails when the property doesn't exist, is
not settable, or its .check() method fails.  These are all programming
errors here, so passing it &error_abort is appropriate.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Cédric Le Goater" <clg@kaod.org>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Joel Stanley <joel@jms.id.au>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200630090351.1247703-17-armbru@redhat.com>

hw: Fix error API violation around object_property_set_link()

The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL.  Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.

virtio_gpu_pci_base_realize(), virtio_vga_base_realize(),
sparc32_ledma_device_realize(), sparc32_dma_realize(),
sparc32_dma_realize() xilinx_axidma_realize(), mips_cps_realize(),
macio_realize_ide(), xilinx_enet_realize(), and
virtio_iommu_pci_realize() are wrong that way: they reuse the argument
they pass to object_property_set_link() for another call.

Harmless, because object_property_set_link() can't actually fail for
them: it fails when the property doesn't exist, is not settable, or
its .check() method fails.  Fix by passing &error_abort instead.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com>
Cc: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200630090351.1247703-16-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>

qdev: Drop qbus_set_hotplug_handler() parameter @errp

qbus_set_hotplug_handler() is a simple wrapper around
object_property_set_link().

object_property_set_link() fails when the property doesn't exist, is
not settable, or its .check() method fails.  These are all programming
errors here, so passing &error_abort to qbus_set_hotplug_handler() is
appropriate.

Most of its callers do.  Exceptions:

* pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL,
  i.e. they ignore errors.

* spapr_machine_init() passes &error_fatal.

* s390_pcihost_realize(), virtio_serial_device_realize(),
  s390_pcihost_plug() pass the error to their callers.  The latter two
  keep going after the error, which looks wrong.

Drop the @errp parameter, and instead pass &error_abort to
object_property_set_link().

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-15-armbru@redhat.com>

qdev: Drop qbus_set_bus_hotplug_handler() parameter @errp

All callers pass &error_abort.  Drop the parameter.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-14-armbru@redhat.com>

aspeed: Clean up roundabout error propagation

Replace

        sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &local_err);
        error_propagate(&err, local_err);
        if (err) {
            error_propagate(errp, err);
            return;
}

by

        sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &err);
        if (err) {
            error_propagate(errp, err);
            return;
}

Cc: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200630090351.1247703-13-armbru@redhat.com>

vnc: Plug minor memory leak in vnc_display_open()

vnc_display_print_local_addr() leaks the Error object when
qio_channel_socket_get_local_address() fails.  Seems unlikely.  Called
when we create a VNC display with vnc_display_open().  Plug the leak
by passing NULL to ignore the error.

Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-12-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

test-util-filemonitor: Plug unlikely memory leak

test_file_monitor_events() leaks an Error object when
qemu_file_monitor_add_watch() fails, which seems unlikely.  Plug it.

Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-11-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

sd/milkymist-memcard: Plug minor memory leak in realize

milkymist_memcard_realize() leaks an Error object when realization of
its "sd-card" device fails.  Quite harmless, since we only ever
realize this once, in milkymist_init() via milkymist_memcard_create().

Plug the leak.

Fixes: 3d0369ba499866cc6a839f71212d97876500762d
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>

qga: Plug unlikely memory leak in guest-set-memory-blocks

transfer_memory_block() leaks an Error object when reading file
/sys/devices/system/memory/memory<INDEX>/state fails with errno other
than ENOENT, and @sys2memblk is false, i.e. when the state file exists
but cannot be read (seems quite unlikely), and this is
guest-set-memory-blocks, not guest-get-memory-blocks.

Plug the leak.

Fixes: bd240fca42d5f072fb758a71720d9de9990ac553
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Message-Id: <20200630090351.1247703-9-armbru@redhat.com>

spapr: Plug minor memory leak in spapr_machine_init()

spapr_machine_init() leaks an Error object when
kvmppc_check_papr_resize_hpt() fails and spapr->resize_hpt is
SPAPR_RESIZE_HPT_DISABLED, i.e. when the host doesn't support hash
page table resizing, and the user didn't ask for it.  As harmless as
memory leaks can possibly be.  Plug it.

Fixes: 30f4b05bd090564181554d0890605eb2c143e4ea
Cc: David Gibson <dgibson@redhat.com>
Cc: qemu-ppc@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20200630090351.1247703-8-armbru@redhat.com>

usb/dev-mtp: Fix Error double free after inotify failure

error_report_err() frees its first argument.  Freeing it again is
wrong.  Don't.

Fixes: 47287c27d0c367a89f7b2851e23a7f8b2d499dd6
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200630090351.1247703-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

tests: Use error_free_or_abort() where appropriate

Replace

    g_assert(err != NULL);
    error_free(err);
    err = NULL;

and variations thereof by

    error_free_or_abort(&err);

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200630090351.1247703-6-armbru@redhat.com>

tests: Use &error_abort where appropriate

Receiving the error in a local variable only to assert there is none
is less clear than passing &error_abort.  Clean up.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200630090351.1247703-5-armbru@redhat.com>

Clean up some calls to ignore Error objects the right way

Receiving the error in a local variable only to free it is less clear
(and also less efficient) than passing NULL.  Clean up.

Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Jerome Forissier <jerome@forissier.org>
CC: Greg Kurz <groug@kaod.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200630090351.1247703-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>

pci: Delete useless error_propagate()

Cc: Jens Freimann <jfreimann@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200630090351.1247703-3-armbru@redhat.com>

net/virtio: Fix failover_replug_primary() return value regression

Commit 150ab54aa6 "net/virtio: fix re-plugging of primary device"
fixed failover_replug_primary() to return false on failure.  Commit
5a0948d36c "net/virtio: Fix failover error handling crash bugs" broke
it again for hotplug_handler_plug() failure.  Unbreak it.

Commit 5a0948d36c4cbc1c5534afac6fee99de55245d12

Fixes: 5a0948d36c4cbc1c5534afac6fee99de55245d12
Cc: Jens Freimann <jfreimann@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20200630090351.1247703-2-armbru@redhat.com>

hw/virtio/virtio-iommu-pci.c: Fix typo in error message

Fix a typo in an error message in virtio_iommu_pci_realize():
"Check you machine" should be "Check your machine".

Reported-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200625100811.12690-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>

chardev/tcp: Fix error message double free error

Errors are already freed by error_report_err, so we only need to call
error_free when that function is not called.

Cc: qemu-stable@nongnu.org
Signed-off-by: lichun <lichun@ruijie.com.cn>
Message-Id: <20200621213017.17978-1-lichun@ruijie.com.cn>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message improved, cc: qemu-stable]
Signed-off-by: Markus Armbruster <armbru@redhat.com>

hw/misc/pca9552: Add missing TypeInfo::class_size field

When adding the generic PCA955xClass in commit 736132e455, we
forgot to set the class_size field. Fill it now to avoid:

  (gdb) run -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  Starting program: ../../qemu/qemu/arm-softmmu/qemu-system-arm -machine mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  double free or corruption (!prev)
  Thread 1 "qemu-system-arm" received signal SIGABRT, Aborted.
  __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
  (gdb) where
  #0  __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
  #1  0x00007ffff75d8859 in __GI_abort () at abort.c:79
  #2  0x00007ffff76433ee in __libc_message
      (action=action@entry=do_abort, fmt=fmt@entry=0x7ffff776d285 "%s\n")
      at ../sysdeps/posix/libc_fatal.c:155
  #3  0x00007ffff764b47c in malloc_printerr
      (str=str@entry=0x7ffff776f690 "double free or corruption (!prev)")
      at malloc.c:5347
  #4  0x00007ffff764d12c in _int_free
      (av=0x7ffff779eb80 <main_arena>, p=0x5555567a3990, have_lock=<optimized out>) at malloc.c:4317
  #5  0x0000555555c906c3 in type_initialize_interface
      (ti=ti@entry=0x5555565b8f40, interface_type=0x555556597ad0, parent_type=0x55555662ca10) at qom/object.c:259
  #6  0x0000555555c902da in type_initialize (ti=ti@entry=0x5555565b8f40)
      at qom/object.c:323
  #7  0x0000555555c90d20 in type_initialize (ti=0x5555565b8f40)
      at qom/object.c:1028

  $ valgrind --track-origins=yes qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  ==77479== Memcheck, a memory error detector
  ==77479== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al.
  ==77479== Using Valgrind-3.15.0 and LibVEX; rerun with -h for copyright info
  ==77479== Command: qemu-system-arm -M mcimx6ul-evk -m 128M -display none -serial stdio -kernel ./OS.elf
  ==77479==
  ==77479== Invalid write of size 2
  ==77479==    at 0x6D8322: pca9552_class_init (pca9552.c:424)
  ==77479==    by 0x844D1F: type_initialize (object.c:1029)
  ==77479==    by 0x844D1F: object_class_foreach_tramp (object.c:1016)
  ==77479==    by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
  ==77479==    by 0x8453A4: object_class_foreach (object.c:1038)
  ==77479==    by 0x8453A4: object_class_get_list (object.c:1095)
  ==77479==    by 0x556194: select_machine (vl.c:2416)
  ==77479==    by 0x556194: qemu_init (vl.c:3828)
  ==77479==    by 0x40AF9C: main (main.c:48)
  ==77479==  Address 0x583f108 is 0 bytes after a block of size 200 alloc'd
  ==77479==    at 0x483DD99: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
  ==77479==    by 0x4AF8D30: g_malloc0 (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
  ==77479==    by 0x844258: type_initialize.part.0 (object.c:306)
  ==77479==    by 0x844D1F: type_initialize (object.c:1029)
  ==77479==    by 0x844D1F: object_class_foreach_tramp (object.c:1016)
  ==77479==    by 0x4AE1057: g_hash_table_foreach (in /usr/lib/x86_64-linux-gnu/libglib-2.0.so.0.6400.2)
  ==77479==    by 0x8453A4: object_class_foreach (object.c:1038)
  ==77479==    by 0x8453A4: object_class_get_list (object.c:1095)
  ==77479==    by 0x556194: select_machine (vl.c:2416)
  ==77479==    by 0x556194: qemu_init (vl.c:3828)
  ==77479==    by 0x40AF9C: main (main.c:48)

Fixes: 736132e455 ("hw/misc/pca9552: Add generic PCA955xClass")
Reported-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
Message-id: 20200629074704.23028-1-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/amarkovic/tags/mips-gsoc-queue-jun-27-2020' into staging

MIPS + TCG Continuous Benchmarking queue for June 27th, 2020

# gpg: Signature made Sat 27 Jun 2020 20:30:48 BST
# gpg:                using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [full]
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01  DD75 D497 2A89 67F7 5A65

* remotes/amarkovic/tags/mips-gsoc-queue-jun-27-2020:
  MAINTAINERS: Add 'Performance Tools and Tests' subsection
  scripts/performance: Add topN_callgrind.py script
  scripts/performance: Add topN_perf.py script
  MAINTAINERS: Add Loongson-3 maintainer and reviewer
  hw/intc: Add Loongson LIOINTC support
  hw/mips: Implement the kvm_type() hook in MachineClass

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

MAINTAINERS: Add 'Performance Tools and Tests' subsection

This commit creates a new 'Miscellaneous' section which hosts a new
'Performance Tools and Tests' subsection. This subsection will contain
the the performance scripts and benchmarks written as a part of the
'TCG Continuous Benchmarking' project. Also, it will be a placeholder
for follow-ups to this project, if any.

Signed-off-by: Ahmed Karaman <ahmedkhaledkaraman@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200626164546.22102-4-ahmedkhaledkaraman@gmail.com>

scripts/performance: Add topN_callgrind.py script

Python script that prints the top N most executed functions in QEMU
using callgrind.

Syntax:
topN_callgrind.py [-h] [-n] <number of displayed top functions>  -- \
                      <qemu executable> [<qemu executable options>] \
                      <target executable> [<target execurable options>]

[-h] - Print the script arguments help message.
[-n] - Specify the number of top functions to print.
     - If this flag is not specified, the tool defaults to 25.

Example of usage:
topN_callgrind.py -n 20 -- qemu-arm coulomb_double-arm

Example Output:
No.  Percentage Function Name         Source File
----  --------- ------------------    ------------------------------
   1    24.577% 0x00000000082db000    ???
   2    20.467% float64_mul           <qemu>/fpu/softfloat.c
   3    14.720% float64_sub           <qemu>/fpu/softfloat.c
   4    13.864% float64_add           <qemu>/fpu/softfloat.c
   5     4.876% helper_mulsd          <qemu>/target/i386/ops_sse.h
   6     3.767% helper_subsd          <qemu>/target/i386/ops_sse.h
   7     3.549% helper_addsd          <qemu>/target/i386/ops_sse.h
   8     2.185% helper_ucomisd        <qemu>/target/i386/ops_sse.h
   9     1.667% helper_lookup_tb_ptr  <qemu>/include/exec/tb-lookup.h
  10     1.662% f64_compare           <qemu>/fpu/softfloat.c
  11     1.509% helper_lookup_tb_ptr  <qemu>/accel/tcg/tcg-runtime.c
  12     0.635% helper_lookup_tb_ptr  <qemu>/include/exec/exec-all.h
  13     0.616% float64_div           <qemu>/fpu/softfloat.c
  14     0.502% helper_pand_xmm       <qemu>/target/i386/ops_sse.h
  15     0.502% float64_mul           <qemu>/include/fpu/softfloat.h
  16     0.476% helper_lookup_tb_ptr  <qemu>/target/i386/cpu.h
  17     0.437% float64_compare_quiet <qemu>/fpu/softfloat.c
  18     0.414% helper_pxor_xmm       <qemu>/target/i386/ops_sse.h
  19     0.353% round_to_int          <qemu>/fpu/softfloat.c
  20     0.347% helper_cc_compute_all <qemu>/target/i386/cc_helper.c

Signed-off-by: Ahmed Karaman <ahmedkhaledkaraman@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200626164546.22102-3-ahmedkhaledkaraman@gmail.com>

scripts/performance: Add topN_perf.py script

Syntax:
topN_perf.py [-h] [-n] <number of displayed top functions>  -- \
                 <qemu executable> [<qemu executable options>] \
                 <target executable> [<target execurable options>]

[-h] - Print the script arguments help message.
[-n] - Specify the number of top functions to print.
     - If this flag is not specified, the tool defaults to 25.

Example of usage:
topN_perf.py -n 20 -- qemu-arm coulomb_double-arm

Example Output:
 No.  Percentage  Name                       Invoked by
----  ----------  -------------------------  -------------------------
   1      16.25%  float64_mul                qemu-x86_64
   2      12.01%  float64_sub                qemu-x86_64
   3      11.99%  float64_add                qemu-x86_64
   4       5.69%  helper_mulsd               qemu-x86_64
   5       4.68%  helper_addsd               qemu-x86_64
   6       4.43%  helper_lookup_tb_ptr       qemu-x86_64
   7       4.28%  helper_subsd               qemu-x86_64
   8       2.71%  f64_compare                qemu-x86_64
   9       2.71%  helper_ucomisd             qemu-x86_64
  10       1.04%  helper_pand_xmm            qemu-x86_64
  11       0.71%  float64_div                qemu-x86_64
  12       0.63%  helper_pxor_xmm            qemu-x86_64
  13       0.50%  0x00007f7b7004ef95         [JIT] tid 491
  14       0.50%  0x00007f7b70044e83         [JIT] tid 491
  15       0.36%  helper_por_xmm             qemu-x86_64
  16       0.32%  helper_cc_compute_all      qemu-x86_64
  17       0.30%  0x00007f7b700433f0         [JIT] tid 491
  18       0.30%  float64_compare_quiet      qemu-x86_64
  19       0.27%  soft_f64_addsub            qemu-x86_64
  20       0.26%  round_to_int               qemu-x86_64

Signed-off-by: Ahmed Karaman <ahmedkhaledkaraman@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <20200626164546.22102-2-ahmedkhaledkaraman@gmail.com>

MAINTAINERS: Add Loongson-3 maintainer and reviewer

Add myself as the maintainer for Loongson-3 virtual platforms, and
also add Jiaxun Yang as the reviewer.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1592995531-32600-5-git-send-email-chenhc@lemote.com>

hw/intc: Add Loongson LIOINTC support

Loongson-3 has an integrated liointc (Local I/O Interrupt Controller).
It is similar to Goldfish interrupt controller, but more powerful (e.g.,
it can route external interrupt to multi-cores).

Documents about Loongson-3's liointc:
1, https://wiki.godson.ac.cn/ip_block:liointc;
2, The "I/O中断" section of Loongson-3's user mannual, part 1.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1592995531-32600-3-git-send-email-chenhc@lemote.com>

hw/mips: Implement the kvm_type() hook in MachineClass

MIPS has two types of KVM: TE & VZ, and TE is the default type. Now we
can't create a VZ guest in QEMU because it lacks the kvm_type() hook in
MachineClass. This patch add the the kvm_type() hook to support both of
the two types.

[AM: Added "if defined" guards.]

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1592995531-32600-2-git-send-email-chenhc@lemote.com>

Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200626' into staging

target-arm queue:
 * hw/arm/aspeed: improve QOM usage
 * hw/misc/pca9552: trace GPIO change events
 * target/arm: Implement ARMv8.5-MemTag for system emulation

# gpg: Signature made Fri 26 Jun 2020 16:13:27 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20200626: (57 commits)
  target/arm: Enable MTE
  target/arm: Add allocation tag storage for system mode
  target/arm: Create tagged ram when MTE is enabled
  target/arm: Cache the Tagged bit for a page in MemTxAttrs
  target/arm: Always pass cacheattr to get_phys_addr
  target/arm: Set PSTATE.TCO on exception entry
  target/arm: Implement data cache set allocation tags
  target/arm: Complete TBI clearing for user-only for SVE
  target/arm: Add mte helpers for sve scatter/gather memory ops
  target/arm: Handle TBI for sve scalar + int memory ops
  target/arm: Add mte helpers for sve scalar + int ff/nf loads
  target/arm: Add mte helpers for sve scalar + int stores
  target/arm: Add mte helpers for sve scalar + int loads
  target/arm: Add arm_tlb_bti_gp
  target/arm: Tidy trans_LD1R_zpri
  target/arm: Use mte_check1 for sve LD1R
  target/arm: Use mte_checkN for sve unpredicated stores
  target/arm: Use mte_checkN for sve unpredicated loads
  target/arm: Add helper_mte_check_zva
  target/arm: Implement helper_mte_checkN
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Various fixes
* libdaxctl support to correctly align devdax character devices (Jingqi)
* initial-all-set support for live migration (Jay)
* forbid '-numa node, mem' for 5.1 and newer machine types (Igor)
* x87 fixes (Joseph)
* Tighten memory_region_access_valid (Michael) and fix fallout (myself)
* Replay fixes (Pavel)

# gpg: Signature made Fri 26 Jun 2020 14:42:17 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (31 commits)
  i386: Mask SVM features if nested SVM is disabled
  ibex_uart: fix XOR-as-pow
  vmport: move compat properties to hw_compat_5_0
  hyperv: vmbus: Remove the 2nd IRQ
  kvm: i386: allow TSC to differ by NTP correction bounds without TSC scaling
  numa: forbid '-numa node, mem' for 5.1 and newer machine types
  osdep: Make MIN/MAX evaluate arguments only once
  target/i386: Add notes for versioned CPU models
  target/i386: reimplement fpatan using floatx80 operations
  target/i386: reimplement fyl2x using floatx80 operations
  target/i386: reimplement fyl2xp1 using floatx80 operations
  target/i386: reimplement fprem, fprem1 using floatx80 operations
  softfloat: return low bits of quotient from floatx80_modrem
  softfloat: do not set denominator high bit for floatx80 remainder
  softfloat: do not return pseudo-denormal from floatx80 remainder
  softfloat: fix floatx80 remainder pseudo-denormal check for zero
  softfloat: merge floatx80_mod and floatx80_rem
  target/i386: reimplement f2xm1 using floatx80 operations
  xen: Actually fix build without passthrough
  Makefile: Install qemu-[qmp/ga]-ref.* into the directory "interop"
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

i386: Mask SVM features if nested SVM is disabled

QEMU incorrectly validates FEAT_SVM feature flags against
GET_SUPPORTED_CPUID even if SVM features are being masked out by
cpu_x86_cpuid().  This can make QEMU print warnings on most AMD
CPU models, even when SVM nesting is disabled (which is the
default).

This bug was never detected before because of a Linux KVM bug:
until Linux v5.6, KVM was not filtering out SVM features in
GET_SUPPORTED_CPUID when nested was disabled.  This KVM bug was
fixed in Linux v5.7-rc1, on Linux commit a50718cc3f43 ("KVM:
nSVM: Expose SVM features to L1 iff nested is enabled").

Fix the problem by adding a CPUID_EXT3_SVM dependency to all
FEAT_SVM feature flags in the feature_dependencies table.

Reported-by: Yanan Fu <yfu@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20200623230116.277409-1-ehabkost@redhat.com>
[Fix testcase. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

ibex_uart: fix XOR-as-pow

The xor-as-pow warning in clang actually detected a genuine bug.
Fix it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

vmport: move compat properties to hw_compat_5_0

The patches that introduced the properties were submitted when QEMU 5.0
had not been released yet, so they got merged under the wrong heading.
Move them to hw_compat_5_0 so that 5.0 machine types get the pre-patch
behavior.

Fixes: b889212973da ("hw/i386/vmport: Propagate IOPort read to vCPU EAX register")
Fixes: 0342ee761ef2 ("hw/i386/vmport: Set EAX to -1 on failed and unsupported commands")
Fixes: f8bdc550370f ("hw/i386/vmport: Report vmware-vmx-type in CMD_GETVERSION")
Fixes: aaacf1c15a22 ("hw/i386/vmport: Add support for CMD_GETBIOSUUID")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hyperv: vmbus: Remove the 2nd IRQ

It seems like Windows does not really require 2 IRQs to have a
functioning VMBus.

Signed-off-by: Jon Doron <arilou@gmail.com>
Message-Id: <20200617160904.681845-2-arilou@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

kvm: i386: allow TSC to differ by NTP correction bounds without TSC scaling

The Linux TSC calibration procedure is subject to small variations
(its common to see +-1 kHz difference between reboots on a given CPU, for example).

So migrating a guest between two hosts with identical processor can fail, in case
of a small variation in calibrated TSC between them.

Allow a conservative 250ppm error between host TSC and VM TSC frequencies,
rather than requiring an exact match. NTP daemon in the guest can
correct this difference.

Also change migration to accept this bound.

KVM_SET_TSC_KHZ depends on a kernel interface change. Without this change,
the behaviour remains the same: in case of a different frequency
between host and VM, KVM_SET_TSC_KHZ will fail and QEMU will exit.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Message-Id: <20200616165805.GA324612@fuller.cnet>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

numa: forbid '-numa node, mem' for 5.1 and newer machine types

Deprecation period is run out and it's a time to flip the switch
introduced by cd5ff8333a.  Disable legacy option for new machine
types (since 5.1) and amend documentation.

'-numa node,memdev' shall be used instead of disabled option
with new machine types.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20200609135635.761587-1-imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

osdep: Make MIN/MAX evaluate arguments only once

I'm not aware of any immediate bugs in qemu where a second runtime
evaluation of the arguments to MIN() or MAX() causes a problem, but
proactively preventing such abuse is easier than falling prey to an
unintended case down the road.  At any rate, here's the conversation
that sparked the current patch:
https://lists.gnu.org/archive/html/qemu-devel/2018-12/msg05718.html

Update the MIN/MAX macros to only evaluate their argument once at
runtime; this uses typeof(1 ? (a) : (b)) to ensure that we are
promoting the temporaries to the same type as the final comparison (we
have to trigger type promotion, as typeof(bitfield) won't compile; and
we can't use typeof((a) + (b)) or even typeof((a) + 0), as some of our
uses of MAX are on void* pointers where such addition is undefined).

However, we are unable to work around gcc refusing to compile ({}) in
a constant context (such as the array length of a static variable),
even when only used in the dead branch of a __builtin_choose_expr(),
so we have to provide a second macro pair MIN_CONST and MAX_CONST for
use when both arguments are known to be compile-time constants and
where the result must also be usable as a constant; this second form
evaluates arguments multiple times but that doesn't matter for
constants.  By using a void expression as the expansion if a
non-constant is presented to this second form, we can enlist the
compiler to ensure the double evaluation is not attempted on
non-constants.

Alas, as both macros now rely on compiler intrinsics, they are no
longer usable in preprocessor #if conditions; those will just have to
be open-coded or the logic rewritten into #define or runtime 'if'
conditions (but where the compiler dead-code-elimination will probably
still apply).

I tested that both gcc 10.1.1 and clang 10.0.0 produce errors for all
forms of macro mis-use.  As the errors can sometimes be cryptic, I'm
demonstrating the gcc output:

Use of MIN when MIN_CONST is needed:

In file included from /home/eblake/qemu/qemu-img.c:25:
/home/eblake/qemu/include/qemu/osdep.h:249:5: error: braced-group within expression allowed only inside a function
  249 |     ({                                                  \
      |     ^
/home/eblake/qemu/qemu-img.c:92:12: note: in expansion of macro ‘MIN’
   92 | char array[MIN(1, 2)] = "";
      |            ^~~

Use of MIN_CONST when MIN is needed:

/home/eblake/qemu/qemu-img.c: In function ‘is_allocated_sectors’:
/home/eblake/qemu/qemu-img.c:1225:15: error: void value not ignored as it ought to be
 1225 |             i = MIN_CONST(i, n);
      |               ^

Use of MIN in the preprocessor:

In file included from /home/eblake/qemu/accel/tcg/translate-all.c:20:
/home/eblake/qemu/accel/tcg/translate-all.c: In function ‘page_check_range’:
/home/eblake/qemu/include/qemu/osdep.h:249:6: error: token "{" is not valid in preprocessor expressions
  249 |     ({                                                  \
      |      ^

Fix the resulting callsites that used #if or computed a compile-time
constant min or max to use the new macros.  cpu-defs.h is interesting,
as CPU_TLB_DYN_MAX_BITS is sometimes used as a constant and sometimes
dynamic.

It may be worth improving glib's MIN/MAX definitions to be saner, but
that is a task for another day.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200625162602.700741-1-eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: Add notes for versioned CPU models

Add which features are added or removed in this version.

Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20200324051034.30541-1-tao3.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: reimplement fpatan using floatx80 operations

The x87 fpatan emulation is currently based around conversion to
double.  This is inherently unsuitable for a good emulation of any
floatx80 operation.  Reimplement using the soft-float operations, as
for other such instructions.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006230000340.24721@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: reimplement fyl2x using floatx80 operations

The x87 fyl2x emulation is currently based around conversion to
double.  This is inherently unsuitable for a good emulation of any
floatx80 operation.  Reimplement using the soft-float operations,
building on top of the reimplementation of fyl2xp1 and factoring out
code to be shared between the two instructions.

The included test assumes that the result in round-to-nearest mode
should always be one of the two closest floating-point numbers to the
mathematically exact result (including that it should be exact, in the
exact cases which cover more cases than for fyl2xp1).

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006172321530.20587@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: reimplement fyl2xp1 using floatx80 operations

The x87 fyl2xp1 emulation is currently based around conversion to
double.  This is inherently unsuitable for a good emulation of any
floatx80 operation, even before considering that it is a particularly
naive implementation using double (adding 1 then using log rather than
attempting a better emulation using log1p).

Reimplement using the soft-float operations, as was done for f2xm1; as
in that case, m68k has related operations but not exactly this one and
it seemed safest to implement directly rather than reusing the m68k
code to avoid accumulation of errors.

A test is included with many randomly generated inputs.  The
assumption of the test is that the result in round-to-nearest mode
should always be one of the two closest floating-point numbers to the
mathematical value of y * log2(x + 1); the implementation aims to do
somewhat better than that (about 70 correct bits before rounding).  I
haven't investigated how accurate hardware is.

Intel manuals describe a narrower range of valid arguments to this
instruction than AMD manuals.  The implementation accepts the wider
range (it's needed anyway for the core code to be reusable in a
subsequent patch reimplementing fyl2x), but the test only has inputs
in the narrower range so that it's valid on hardware that may reject
or produce poor results for inputs outside that range.

Code in the previous implementation that sets C2 for some out-of-range
arguments is not carried forward to the new implementation; C2 is
undefined for this instruction and I suspect that code was just
cut-and-pasted from the trigonometric instructions (fcos, fptan, fsin,
fsincos) where C2 *is* defined to be set for out-of-range arguments.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006172320190.20587@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: reimplement fprem, fprem1 using floatx80 operations

The x87 fprem and fprem1 emulation is currently based around
conversion to double, which is inherently unsuitable for a good
emulation of any floatx80 operation.  Reimplement using the soft-float
floatx80 remainder operations.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081657200.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

softfloat: return low bits of quotient from floatx80_modrem

Both x87 and m68k need the low parts of the quotient for their
remainder operations.  Arrange for floatx80_modrem to track those bits
and return them via a pointer.

The architectures using float32_rem and float64_rem do not appear to
need this information, so the *_rem interface is left unchanged and
the information returned only from floatx80_modrem.  The logic used to
determine the low 7 bits of the quotient for m68k
(target/m68k/fpu_helper.c:make_quotient) appears completely bogus (it
looks at the result of converting the remainder to integer, the
quotient having been discarded by that point); this patch does not
change that, but the m68k maintainers may wish to do so.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081656500.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

softfloat: do not set denominator high bit for floatx80 remainder

The floatx80 remainder implementation unnecessarily sets the high bit
of bSig explicitly.  By that point in the function, arguments that are
invalid, zero, infinity or NaN have already been handled and
subnormals have been through normalizeFloatx80Subnormal, so the high
bit will already be set.  Remove the unnecessary code.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081656220.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

softfloat: do not return pseudo-denormal from floatx80 remainder

The floatx80 remainder implementation sometimes returns the numerator
unchanged when the denominator is sufficiently larger than the
numerator.  But if the value to be returned unchanged is a
pseudo-denormal, that is incorrect.  Fix it to normalize the numerator
in that case.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081655520.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

softfloat: fix floatx80 remainder pseudo-denormal check for zero

The floatx80 remainder implementation ignores the high bit of the
significand when checking whether an operand (numerator) with zero
exponent is zero.  This means it mishandles a pseudo-denormal
representation of 0x1p-16382L by treating it as zero.  Fix this by
checking the whole significand instead.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081655180.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

softfloat: merge floatx80_mod and floatx80_rem

The m68k-specific softfloat code includes a function floatx80_mod that
is extremely similar to floatx80_rem, but computing the remainder
based on truncating the quotient toward zero rather than rounding it
to nearest integer.  This is also useful for emulating the x87 fprem
and fprem1 instructions.  Change the floatx80_rem implementation into
floatx80_modrem that can perform either operation, with both
floatx80_rem and floatx80_mod as thin wrappers available for all
targets.

There does not appear to be any use for the _mod operation for other
floating-point formats in QEMU (the only other architectures using
_rem at all are linux-user/arm/nwfpe, for FPA emulation, and openrisc,
for instructions that have been removed in the latest version of the
architecture), so no change is made to the code for other formats.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2006081654280.23637@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/i386: reimplement f2xm1 using floatx80 operations

The x87 f2xm1 emulation is currently based around conversion to
double.  This is inherently unsuitable for a good emulation of any
floatx80 operation, even before considering that it is a particularly
naive implementation using double (computing with pow and then
subtracting 1 rather than attempting a better emulation using expm1).

Reimplement using the soft-float operations, including additions and
multiplications with higher precision where appropriate to limit
accumulation of errors.  I considered reusing some of the m68k code
for transcendental operations, but the instructions don't generally
correspond exactly to x87 operations (for example, m68k has 2^x and
e^x - 1, but not 2^x - 1); to avoid possible accumulation of errors
from applying multiple such operations each rounding to floatx80
precision, I wrote a direct implementation of 2^x - 1 instead.  It
would be possible in principle to make the implementation more
efficient by doing the intermediate operations directly with
significands, signs and exponents and not packing / unpacking floatx80
format for each operation, but that would make it significantly more
complicated and it's not clear that's worthwhile; the m68k emulation
doesn't try to do that.

A test is included with many randomly generated inputs.  The
assumption of the test is that the result in round-to-nearest mode
should always be one of the two closest floating-point numbers to the
mathematical value of 2^x - 1; the implementation aims to do somewhat
better than that (about 70 correct bits before rounding).  I haven't
investigated how accurate hardware is.

Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006112341010.18393@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

xen: Actually fix build without passthrough

Fix typo.

Fixes: acd0c9416d48 ("xen: fix build without pci passthrough")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <20200619103115.254127-1-anthony.perard@citrix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Makefile: Install qemu-[qmp/ga]-ref.* into the directory "interop"

We need install qemu-[qmp/ga]-ref.* files into the subdirectory of qemu docs: interop.

If we visit the following address and click the link to qemu-qmp-ref.html:
https://www.qemu.org/docs/master/interop/bitmaps.html#basic-qmp-usage

It will report following error:
"
Not Found
The requested URL /docs/master/interop/qemu-qmp-ref.html was not found on this server.
"

Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1591663670-47712-1-git-send-email-wang.yi59@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

hw/scsi/megasas: Fix possible out-of-bounds array access in tracepoints

Some tracepoints in megasas.c use a guest-controlled value as an index
into the mfi_frame_desc[] array. Thus a malicious guest could cause an
out-of-bounds error here. Fortunately, the impact is very low since this
can only happen when the corresponding tracepoints have been enabled
before, but the problem should be fixed anyway with a proper check.

Buglink: https://bugs.launchpad.net/qemu/+bug/1882065
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200615072629.32321-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

docs/nvdimm: add description of alignment requirement of device dax

For device dax (e.g., /dev/dax0.0), the NUM of 'align=NUM' option
needs to match the alignment requirement of the device dax.
It must be larger than or equal to the 'align' of device dax.

Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20200429085011.63752-3-jingqi.liu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

target/arm: Enable MTE

We now implement all of the components of MTE, without actually
supporting any tagged memory.  All MTE instructions will work,
trivially, so we can enable support.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-46-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add allocation tag storage for system mode

Look up the physical address for the given virtual address,
convert that to a tag physical address, and finally return
the host address that backs it.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-45-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Create tagged ram when MTE is enabled

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20200626033144.790098-44-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Cache the Tagged bit for a page in MemTxAttrs

This "bit" is a particular value of the page's MemAttr.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-43-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Always pass cacheattr to get_phys_addr

We need to check the memattr of a page in order to determine
whether it is Tagged for MTE.  Between Stage1 and Stage2,
this becomes simpler if we always collect this data, instead
of occasionally being presented with NULL.

Use the nonnull attribute to allow the compiler to check that
all pointer arguments are non-null.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-42-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Set PSTATE.TCO on exception entry

D1.10 specifies that exception handlers begin with tag checks overridden.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-41-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement data cache set allocation tags

This is DC GVA and DC GZVA, and the tag check for DC ZVA.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-40-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Complete TBI clearing for user-only for SVE

There are a number of paths by which the TBI is still intact
for user-only in the SVE helpers.

Because we currently always set TBI for user-only, we do not
need to pass down the actual TBI setting from above, and we
can remove the top byte in the inner-most primitives, so that
none are forgotten.  Moreover, this keeps the "dirty" pointer
around at the higher levels, where we need it for any MTE checking.

Since the normal case, especially for user-only, goes through
RAM, this clearing merely adds two insns per page lookup, which
will be completely in the noise.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-39-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add mte helpers for sve scatter/gather memory ops

Because the elements are non-sequential, we cannot eliminate many
tests straight away like we can for sequential operations.  But
we often have the PTE details handy, so we can test for Tagged.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-38-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Handle TBI for sve scalar + int memory ops

We still need to handle tbi for user-only when mte is inactive.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-37-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add mte helpers for sve scalar + int ff/nf loads

Because the elements are sequential, we can eliminate many tests all
at once when the tag hits TCMA, or if the page(s) are not Tagged.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-36-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add mte helpers for sve scalar + int stores

Because the elements are sequential, we can eliminate many tests all
at once when the tag hits TCMA, or if the page(s) are not Tagged.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-35-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add mte helpers for sve scalar + int loads

Because the elements are sequential, we can eliminate many tests all
at once when the tag hits TCMA, or if the page(s) are not Tagged.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-34-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add arm_tlb_bti_gp

Introduce an lvalue macro to wrap target_tlb_bit0.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-33-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Tidy trans_LD1R_zpri

Move the variable declarations to the top of the function,
but do not create a new label before sve_access_check.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-32-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use mte_check1 for sve LD1R

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-31-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use mte_checkN for sve unpredicated stores

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-30-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Use mte_checkN for sve unpredicated loads

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-29-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add helper_mte_check_zva

Use a special helper for DC_ZVA, rather than the more
general mte_checkN.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-28-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement helper_mte_checkN

Fill out the stub that was added earlier.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-27-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement helper_mte_check1

Fill out the stub that was added earlier.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-26-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add gen_mte_checkN

Replace existing uses of check_data_tbi in translate-a64.c that
perform multiple logical memory access.  Leave the helper blank
for now to reduce the patch size.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-25-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add gen_mte_check1

Replace existing uses of check_data_tbi in translate-a64.c that
perform a single logical memory access.  Leave the helper blank
for now to reduce the patch size.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-24-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Move regime_tcr to internals.h

We will shortly need this in mte_helper.c as well.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-23-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Move regime_el to internals.h

We will shortly need this in mte_helper.c as well.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-22-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement the access tag cache flushes

Like the regular data cache flushes, these are nops within qemu.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-21-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement the LDGM, STGM, STZGM instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-20-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Simplify DC_ZVA

Now that we know that the operation is on a single page,
we need not loop over pages while probing.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-19-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Restrict the values of DCZID.BS under TCG

We can simplify our DC_ZVA if we recognize that the largest BS
that we actually use in system mode is 64.  Let us just assert
that it fits within TARGET_PAGE_SIZE.

For DC_GVA and STZGM, we want to be able to write whole bytes
of tag memory, so assert that BS is >= 2 * TAG_GRANULE, or 32.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-18-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement the STGP instruction

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-17-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement LDG, STG, ST2G instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-16-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Define arm_cpu_do_unaligned_access for user-only

Use the same code as system mode, so that we generate the same
exception + syndrome for the unaligned access.

For the moment, if MTE is enabled so that this path is reachable,
this would generate a SIGSEGV in the user-only cpu_loop.  Decoding
the syndrome to produce the proper SIGBUS will be done later.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-15-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement the SUBP instruction

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-14-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement the GMI instruction

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-13-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement the ADDG, SUBG instructions

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-12-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Revise decoding for disas_add_sub_imm

The current Arm ARM has adjusted the official decode of
"Add/subtract (immediate)" so that the shift field is only bit 22,
and bit 23 is part of the op1 field of the parent category
"Data processing - immediate".

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-11-richard.henderson@linaro.org
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Implement the IRG instruction

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-10-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add MTE bits to tb_flags

Cache the composite ATA setting.

Cache when MTE is fully enabled, i.e. access to tags are enabled
and tag checks affect the PE.  Do this for both the normal context
and the UNPRIV context.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-9-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add MTE system registers

This is TFSRE0_EL1, TFSR_EL1, TFSR_EL2, TFSR_EL3,
RGSR_EL1, GCR_EL1, GMID_EL1, and PSTATE.TCO.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-8-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Add DISAS_UPDATE_NOCHAIN

Add an option that writes back the PC, like DISAS_UPDATE_EXIT,
but does not exit back to the main loop.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-7-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

target/arm: Rename DISAS_UPDATE to DISAS_UPDATE_EXIT

Emphasize that the is_jmp option exits to the main loop.

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200626033144.790098-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>