Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
w32: Make qemu_vfree() accept NULL like the POSIX implementation
On POSIX, qemu_vfree() accepts NULL, because it's merely wrapper
around free(). As far as I can tell, the Windows implementation
doesn't. Breeds bugs that bite only under Windows.
Make the Windows implementation behave like the POSIX implementation.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Liu Yuan [Mon, 14 Jan 2013 06:01:03 +0000 (14:01 +0800)]
sheepdog: clean up sd_aio_setup()
The last two parameters of sd_aio_setup() are never used, so remove them.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Liu Yuan [Tue, 15 Jan 2013 08:28:55 +0000 (16:28 +0800)]
sheepdog: multiplex the rw FD to flush cache
This will reduce sockfds connected to the sheep server to one, which simply the
future hacks.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini [Mon, 14 Jan 2013 15:26:58 +0000 (16:26 +0100)]
block: clear dirty bitmap when discarding
Note that resetting bits in the dirty bitmap is done _before_ actually
processing the request. Writes, instead, set bits after the request
is completed.
This way, when there are concurrent write and discard requests, the
outcome will always be that the blocks are marked dirty. This scenario
should never happen, but it is safer to do it this way.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini [Mon, 14 Jan 2013 15:26:57 +0000 (16:26 +0100)]
ide: issue discard asynchronously but serialize the pieces
Now that discard can take a long time, make it asynchronous.
Each LBA range entry is processed separately because discard
can be an expensive operation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini [Mon, 14 Jan 2013 15:26:56 +0000 (16:26 +0100)]
ide: fix TRIM with empty range entry
ATA-ACS-3 says "If the two byte range length is zero, then the LBA
Range Entry shall be discarded as padding." iovecs are used as if
they are linearized, so it is incorrect to discard the rest of
this iovec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini [Mon, 14 Jan 2013 15:26:55 +0000 (16:26 +0100)]
block: make discard asynchronous
This is easy with the thread pool, because we can use s->is_xfs and
s->has_discard from the worker function.
QEMU has a widespread assumption that each I/O operation writes less
than 2^32 bytes. This patch doesn't fix it throughout of course,
but it starts correcting struct RawPosixAIOData so that there is
no regression with respect to the synchronous discard implementation.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Paolo Bonzini [Mon, 14 Jan 2013 15:26:53 +0000 (16:26 +0100)]
raw-posix: remember whether discard failed
Avoid sending system calls repeatedly if they shall fail. This
does not apply to XFS: if the filesystem-specific ioctl fails,
something weird is happening.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kusanagi Kouichi [Mon, 14 Jan 2013 15:26:52 +0000 (16:26 +0100)]
raw-posix: support discard on more filesystems
Linux 2.6.38 introduced the filesystem independent interface to
deallocate part of a file. As of Linux 3.7, btrfs, ext4, ocfs2,
tmpfs and xfs support it.
Even though the system calls here are in practice issued on Linux,
the code is structured to allow plugging in alternatives for other Unix
variants. EOPNOTSUPP is used unconditionally in this patch, but it is
supported in both OpenBSD and Mac OS X since forever (see for example
http://lists.debian.org/debian-glibc/2006/02/msg00337.html).
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
if (bytes_base + bytes_res <= bytes_limit) {
/* no wait */
} else {
/* operation needs to be throttled */
}
As a result, any I/O operations that are triggered between now and
bs->slice_end are incorrectly limited. If 10 MB of data has been
written since the VM was started, QEMU thinks that 10 MB of data has
been written in this slice. This leads to a I/O lockup in the guest.
We fix this by delaying the start of a new slice to the next
call of bdrv_exceed_io_limits().
Signed-off-by: Peter Lieven <pl@kamp.de> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Kevin Wolf [Mon, 14 Jan 2013 16:31:31 +0000 (17:31 +0100)]
qcow2: Fix segfault on zero-length write
One of the recent refactoring patches (commit f50f88b9) didn't take care
to initialise l2meta properly, so with zero-length writes, which don't
even enter the write loop, qemu just segfaulted.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
KONRAD Frederic [Mon, 14 Jan 2013 21:52:02 +0000 (22:52 +0100)]
virtio-9p: fix compilation error.
Fix the compilation error introduced by msg new field.
CC hw/9pfs/virtio-9p.o
In file included from /home/konradf/Documents/safe/greensocs/virtio-project/x86-qemu/qemu/hw/9pfs/virtio-9p.c:17:0:
/home/konradf/Documents/safe/greensocs/virtio-project/x86-qemu/qemu/hw/virtio-pci.h:30:16: erreur: field ‘msg’ has incomplete type
make: *** [hw/9pfs/virtio-9p.o] Erreur 1
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Michael Roth [Mon, 14 Jan 2013 19:20:13 +0000 (13:20 -0600)]
dataplane: fix build breakage on set_guest_notifiers()
virtio_pci_set_guest_notifiers() now takes an additional argument to
specify the number of virtqueues to assign a guest notifier for. This
causes a build breakage for CONFIG_VIRTIO_BLK_DATA_PLANE builds:
/home/mdroth/w/qemu2.git/hw/dataplane/virtio-blk.c: In function
‘virtio_blk_data_plane_start’:
/home/mdroth/w/qemu2.git/hw/dataplane/virtio-blk.c:451:47: error: too
few arguments to function ‘s->vdev->binding->set_guest_notifiers’
/home/mdroth/w/qemu2.git/hw/dataplane/virtio-blk.c: In function
‘virtio_blk_data_plane_stop’:
/home/mdroth/w/qemu2.git/hw/dataplane/virtio-blk.c:511:5: error: too few
arguments to function ‘s->vdev->binding->set_guest_notifiers’
make[1]: *** [hw/dataplane/virtio-blk.o] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [subdir-x86_64-softmmu] Error 2
Fix this by passing 1 as the number of virtqueues to assign notifiers
for.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Michael Roth [Mon, 14 Jan 2013 19:20:12 +0000 (13:20 -0600)]
virtio-pci: build for uninitialized return value in vq_vector_unmask
Fixes the following:
/home/mdroth/w/qemu2.git/hw/virtio-pci.c: In function
‘kvm_virtio_pci_vector_unmask’:
/home/mdroth/w/qemu2.git/hw/virtio-pci.c:673:12: error: ‘ret’ may be
used uninitialized in this function [-Werror=uninitialized]
cc1: all warnings being treated as errors
make: *** [hw/virtio-pci.o] Error 1
make: *** Waiting for unfinished jobs....
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Alberto Garcia [Fri, 11 Jan 2013 17:25:30 +0000 (18:25 +0100)]
Add GE IP-Octal 232 IndustryPack emulation
The GE IP-Octal 232 is an IndustryPack module that implements eight
RS-232 serial ports, each one of which can be redirected to a
character device in the host.
Signed-off-by: Alberto Garcia <agarcia@igalia.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 14 Jan 2013 16:27:29 +0000 (10:27 -0600)]
Merge remote-tracking branch 'kraxel/usb.76' into staging
* kraxel/usb.76:
usb-host: Initialize dev->port the obviously safe way
usb-host: Drop superfluous null test from usb_host_auto_scan()
ehci: Assert state machine is sane w.r.t. EHCIQueue
xhci: nuke transfe5rs on detach
xhci: call xhci_detach_slot on root port detach too
xhci: create xhci_detach_slot helper function
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Mon, 14 Jan 2013 16:23:50 +0000 (10:23 -0600)]
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,virtio
This further optimizes MSIX handling in virtio-pci.
Also included is pci cleanup by Paolo, and pci device
assignment fix by Alex.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* mst/tags/for_anthony:
pci-assign: Enable MSIX on device to match guest
pci: use constants for devices under the 1B36 device ID, document them
ivshmem: use symbolic constant for PCI ID, add to pci-ids.txt
virtio-9p: use symbolic constant, add to pci-ids.txt
reorganize pci-ids.txt
docs: move pci-ids.txt to docs/specs/
vhost: backend masking support
vhost: set started flag while start is in progress
virtio-net: set/clear vhost_started in reverse order
virtio: backend virtqueue notifier masking
virtio-pci: cache msix messages
kvm: add stub for update msi route
msix: add api to access msix message
virtio: don't waste irqfds on control vqs
Anthony Liguori [Mon, 14 Jan 2013 16:23:25 +0000 (10:23 -0600)]
Merge remote-tracking branch 'bonzini/stub' into staging
* bonzini/stub: (27 commits)
build: improve quiet output for .stp rules
build: fold trace-obj-y into libqemuutil.a
build: some simplifications for "trace/Makefile.objs"
build: remove coroutine-obj-y
build: move version-obj-y to the generic LINK rule
build: move base QAPI files to libqemuutil.a
build: move QAPI definitions for QEMU out of qapi-obj-y
build: consolidate multiple variables into universal-obj-y
build: move qobject files to qobject/ and libqemuutil.a
build: move libqemuutil.a components to util/
build: move files away from tools-obj-y, common-obj-y, user-obj-y
build: move util-obj-y to libqemuutil.a
build: rename oslib-obj-y to util-obj-y
libcacard: list oslib-obj-y file explicitly
libcacard: link vscclient to dynamic library
libcacard: rewrite Makefile in non-recursive style
libcacard: add list of exported symbols
libcacard: use per-target variable definitions
libcacard: prepare to use -y trick in the Makefile
libcacard: require libtool to build it
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
usb-host: Initialize dev->port the obviously safe way
Coverity worries the strcpy() could overrun the destination. It
can't, because the source always points to usb_host_scan()'s auto
port[], which has the same size. Use pstrcpy() anyway, to hush the
checker.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
usb-host: Drop superfluous null test from usb_host_auto_scan()
Coverity points out that port is later passed to usb_host_open(),
which dereferences it. It actually can't be null: it always points to
usb_host_scan()'s auto port[]. Drop the superfluous port == NULL
test.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ehci: Assert state machine is sane w.r.t. EHCIQueue
Coverity worries the EHCIQueue pointer could be null when we pass it
to functions that reference it. The state machine ensures it can't be
null then. Assert that, to hush the checker.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stefan Hajnoczi [Fri, 11 Jan 2013 15:41:29 +0000 (16:41 +0100)]
dataplane: handle misaligned virtio-blk requests
O_DIRECT on Linux has alignment requirements on I/O buffers and
misaligned requests result in -EINVAL. The Linux virtio_blk guest
driver usually submits aligned requests so I forgot to handle misaligned
requests.
It turns out that virtio-win guest drivers submit misaligned requests.
Handle them using a bounce buffer that meets alignment requirements.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Stefan Hajnoczi [Fri, 11 Jan 2013 15:41:27 +0000 (16:41 +0100)]
block: make qiov_is_aligned() public
The qiov_is_aligned() function checks whether a QEMUIOVector meets a
BlockDriverState's alignment requirements. This is needed by
virtio-blk-data-plane so:
1. Move the function from block/raw-posix.c to block/block.c.
2. Make it public in block/block.h.
3. Rename to bdrv_qiov_is_aligned().
4. Change return type from int to bool.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 10 Jan 2013 14:28:35 +0000 (15:28 +0100)]
raw-posix: fix bdrv_aio_ioctl
When the raw-posix aio=thread code was moved from posix-aio-compat.c
to block/raw-posix.c, there was an unintended change to the ioctl code.
The code used to return the ioctl command, which posix_aio_read()
would later morph into a zero. This hack is not necessary anymore,
and in fact breaks scsi-generic (which expects a zero return code).
Remove it.
Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Liu Yuan [Thu, 10 Jan 2013 08:03:47 +0000 (16:03 +0800)]
sheepdog: implement direct write semantics
Sheepdog supports both writeback/writethrough write but has not yet supported
DIRECTIO semantics which bypass the cache completely even if Sheepdog daemon is
set up with cache enabled.
Suppose cache is enabled on Sheepdog daemon size, the new cache control is
cache=writeback # enable the writeback semantics for write
cache=writethrough # enable the emulated writethrough semantics for write
cache=directsync # disable cache competely
Guest WCE toggling on the run time to toggle writeback/writethrough is also
supported.
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Cc: Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Paolo Bonzini [Thu, 10 Jan 2013 14:39:27 +0000 (15:39 +0100)]
block: do not probe zero-sized disks
A blank CD or DVD is visible as a zero-sized disks. Probing such
disks will lead to an EIO and a failure to start the VM. Treating
them as raw is a better solution.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
interface_set_client_capabilities() copies only the first few bits,
because it falls into a Classic C trap: you can declare a parameter
uint8_t caps[58], but the resulting parameter type is uint8_t *, not
uint8_t[58]. In particular, sizeof(caps) is sizeof(uint8_t *), not
the intended sizeof(uint8_t[58]).
Harmless, because the bits aren't used, yet. Broken in commit c10018d6. Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The pointer arithmetic there is safe, but ugly. Coverity grouses
about it. However, the actual comparison is off by one: <= end
instead of < end. Fix by rewriting the check in a cleaner way.
Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Paolo Bonzini [Thu, 20 Dec 2012 14:03:18 +0000 (15:03 +0100)]
build: move QAPI definitions for QEMU out of qapi-obj-y
There is no reason why for example qemu-ga should include all the
definitions for the QEMU monitor. However, there are a few
that are needed (qapi_free_SocketAddress, qapi_free_InetSocketAddress,
ErrorClass_lookup). These should be moved to a separate "core"
.json schema that goes into libqemuutil.a.
For now, make this clearer by moving the qapi-*.o definitions out
of libqemuutil.a. Once the above refactoring is done, qga-obj-y
should not include anymore qapi-types.o and qapi-visit.o.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 20 Dec 2012 14:24:49 +0000 (15:24 +0100)]
build: consolidate multiple variables into universal-obj-y
The directory descent mechanism, and a less-flat tree both helped
in making some *-obj-y definitions very short. Many of these
often end up in universal-obj-y, and used to be separate only
because of libuser (which is now part of history...).
Consolidate these variables in a single one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Alon Levy [Wed, 28 Nov 2012 09:16:26 +0000 (11:16 +0200)]
libcacard: fix missing symbol in libcacard.so
Before patch:
$ make libcacard.la
$ nm ./libcacard/.libs/libcacard.so.0.0.0 | grep " U " | \
egrep -v "(g_)|(GLIBC)|(SECMOD)|(PK11)|(CERT)|(NSS)|(PORT)|(PR)"
U error_set
Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Blue Swirl [Sat, 12 Jan 2013 12:47:07 +0000 (12:47 +0000)]
Merge branch 'target-arm.next' of git://git.linaro.org/people/pmaydell/qemu-arm
* 'target-arm.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
target-arm: Fix SWI (SVC) instruction in M profile.
target-arm: use type_register() instead of type_register_static()
Blue Swirl [Sat, 12 Jan 2013 12:47:02 +0000 (12:47 +0000)]
Merge branch 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf
* 'ppc-for-upstream' of git://repo.or.cz/qemu/agraf: (31 commits)
PPC: linux-user: Calculate context pointer explicitly
target-ppc: Error out for -cpu host on unknown PVR
target-ppc: Slim conversion of model definitions to QOM subclasses
PPC: Bring EPR support closer to reality
PPC: KVM: set has-idle in guest device tree
kvm: Update kernel headers
openpic: fix CTPR and de-assertion of interrupts
openpic: move IACK to its own function
openpic: IRQ_check: search the queue a word at a time
openpic: fix sense and priority bits
openpic: add some bounds checking for IRQ numbers
openpic: use standard bitmap operations
Revert "openpic: Accelerate pending irq search"
openpic: always call IRQ_check from IRQ_get_next
openpic/fsl: critical interrupts ignore mask before v4.1
openpic: make ctpr signed
openpic: rework critical interrupt support
openpic: make register names correspond better with hw docs
ppc/booke: fix crit/mcheck/debug exceptions
openpic: lower interrupt when reading the MSI register
...
user: Consider symbolic links as possible directories
Commit 2296f194dfde4c0a54f249d3fdb8c8ca21dc611b reduced the number
of syscalls performed during user emulation startup, but failed to
consider the use of symbolic links in creating directory structures.
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
linux-user: Rewrite __get_user/__put_user with __builtin_choose_expr
The previous formuation with multiple assignments to __typeof(*hptr) falls
down when hptr is qualified const. E.g. with const struct S *p, p->f is
also qualified const.
With this formulation, there's no assignment to any local variable.
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the new host endian unaligned access functions instead of
open coding byte-by-byte references. Remove assembly special
cases for i386 and ppc -- we've now exposed the operation to
the compiler sufficiently for these to be optimized automatically.
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move the bswap_N -> bswapN wrappers inside CONFIG_BYTESWAP_H.
Change the ultimate fallback defintions from macros to inline functions.
The proper types recieved by the function arguments means we can remove
unnecessary casts, making the code more readable.
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Fixes the libfdt enabled build for hosts that have <machine/bswap.h>.
The code at the beginning of qemu/bswap.h is attempting to standardize
on bswapN. In the case of CONFIG_MACHINE_BSWAP_H, this is all we get.
In the case of CONFIG_BYTESWAP_H, we get bswap_N from the system header
and then wrap these with inline functions to get bswapN.
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anthony Liguori [Fri, 11 Jan 2013 14:43:18 +0000 (08:43 -0600)]
Merge remote-tracking branch 'stefanha/trivial-patches' into staging
* stefanha/trivial-patches:
hw/pc.c: Fix converting of ioport_register* to MemoryRegion
Replace remaining gmtime, localtime by gmtime_r, localtime_r
savevm: Remove MinGW specific code which is no longer needed
qga/channel-posix.c: Explicitly include string.h
configure: Fix comment (copy+paste bug)
readline: avoid memcpy() of overlapping regions
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Fri, 11 Jan 2013 14:23:16 +0000 (08:23 -0600)]
Merge remote-tracking branch 'afaerber-or/prep-up' into staging
* afaerber-or/prep-up:
prep: Use pc87312 device instead of collection of random ISA devices
prep: Add pc87312 Super I/O emulation
prep: Include devices for ppc64 as well
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Julien Grall [Wed, 9 Jan 2013 18:10:22 +0000 (18:10 +0000)]
hw/pc.c: Fix converting of ioport_register* to MemoryRegion
The commit 258711 introduced MemoryRegion to replace ioport_region*
for ioport 80h and F0h.
A MemoryRegion needs to have both read and write callback otherwise a segfault
will occur when an access is made.
The previous behaviour of this both ioport is to return 0xffffffffffffffff.
So keep this behaviour.
Reported-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: Julien Grall <julien.grall@citrix.com> Tested-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Stefan Weil [Mon, 7 Jan 2013 22:08:13 +0000 (23:08 +0100)]
Replace remaining gmtime, localtime by gmtime_r, localtime_r
This allows removing of MinGW specific code and improves
reentrancy for POSIX hosts.
[Removed unused ret variable in qemu_get_timedate() to fix warning:
vl.c: In function ‘qemu_get_timedate’:
vl.c:451:16: error: variable ‘ret’ set but not used [-Werror=unused-but-set-variable]
-- Stefan Hajnoczi]
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The pc-1.3 (+older) names are maintained for compatibility reasons.
For the same reason the "pc" and "q35" aliases are kept. pc-piix-1.4
continues to be the default machine type, again for compatibility
reasons.
Also updated the description (shown by "qemu -M ?") with host bridge
name, south bridge name and chipset release year.
projects / qemu-upstream-4.5-testing.git / log