Nitin A Kamble [Thu, 4 Jun 2009 21:29:50 +0000 (14:29 -0700)]
QEMU KVM: i386: Fix the cpu reset state
As per the IA32 processor manual, the accessed bit is set to 1 in the
processor state after reset. qemu pc cpu_reset code was missing this
accessed bit setting.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Andre Przywara [Fri, 5 Jun 2009 23:03:29 +0000 (01:03 +0200)]
allow CPUID vendor override
KVM-enabled QEMU will always report the vendor ID of the physical CPU it is
running on. Allow to override this if explicitly requested on the
command line. It will not suffice to name a CPU type (like -cpu phenom),
but you have to explicitly set the vendor: -cpu phenom,vendor=AuthenticAMD
Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Glauber Costa [Tue, 9 Jun 2009 16:15:18 +0000 (12:15 -0400)]
provide cpu_index to env mapping
There are some people interested in, given a cpu number,
pick its CPUState. KVM is an example, although not yet in tree.
This patch provides a way of doing that.
Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 11 Jun 2009 09:32:14 +0000 (11:32 +0200)]
vnc: improve numpad support for qemu console.
Reorganize qemu console emulation code. Make it look at the numlock
state and interpret numpad keys as arrow+friends (numlock off) or
digits (numlock on). While being at it also wind up the other numpad
keys.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Sun, 14 Jun 2009 08:38:51 +0000 (11:38 +0300)]
Remove io_index argument from cpu_register_io_memory()
The parameter is always zero except when registering the three internal
io regions (ROM, unassigned, notdirty). Remove the parameter to reduce
the API's power, thus facilitating future change.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Tue, 16 Jun 2009 09:31:28 +0000 (11:31 +0200)]
l2_allocate: Write complete sectors
When modifying the L1 table, l2_allocate() needs to write complete sectors
instead of single entries. The L1 table is already in memory, reading it from
disk in the block layer to align the request is wasted performance.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Thu, 28 May 2009 14:07:07 +0000 (16:07 +0200)]
qcow2: Rename global functions
The qcow2 source is now split into several more manageable files. During the
conversion quite some functions that were static before needed to be changed to
be global to make the source compile again.
We were lucky enough not to get name conflicts with these additional global
names, but they are not nice. This patch adds a qcow2_ prefix to all of the
global functions in qcow2.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Thu, 28 May 2009 14:07:05 +0000 (16:07 +0200)]
qcow2: Split out guest cluster functions
qcow2-cluster.c contains all functions related to the management of guest
clusters, i.e. what the guest sees on its virtual disk. This code is about
mapping these guest clusters to host clusters in the image file using the
two-level lookup tables.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Thu, 28 May 2009 14:07:04 +0000 (16:07 +0200)]
qcow2: Split out refcount handling
qcow2-refcount.c contains all functions which are related to cluster
allocation and management in the image file. A large part of this is the
reference counting of these clusters.
Also a header file qcow2.h is introduced which will contain the interface of
the split qcow2 modules.
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Tue, 16 Jun 2009 12:19:48 +0000 (14:19 +0200)]
vnc: rework VncState release workflow.
Split socket closing and releasing of VncState into two steps. First
close the socket and set the variable to -1 to indicate shutdown in
progress. Do the actual release in a few places where we can be sure it
doesn't cause trouble in form of use-after-free. Add some checks for a
valid socket handle to make sure we don't try to use the closed socket.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avi Kivity [Tue, 16 Jun 2009 13:21:09 +0000 (16:21 +0300)]
raw-posix: Remove O_RDWR when attempting to open a file read-only
When we open a file, we first attempt to open it read-write, then fall back
to read-only. Unfortunately we reuse the flags from the previous attempt,
so both attempts try to open the file with write permissions, and fail.
Fix by clearing the O_RDWR flag from the previous attempt.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a new try to fix the fcntl support in linux-user. I tried to
adress all comments but as the previous version is several weeks old,
it's possible that I've missed some.
This patch doesn't handle linux specific fcntl flags. My plan is to get
this version of the patch reviewed/fixed and then, add them if wanted.
Return EOPNOTSUPP instead of ENOSYS for *xattr* syscalls
In current code, we're sending ENOSYS to target when a syscall for the
xattrs is done. This makes applications like ls complain loudly about
that and breaks scripts parsing the output. Moreover, iirc, implemented
features of filesystems are are sending EOPNOTSUPP (I've not checked so
I may be a little bit wrong on that...).
So, I'm proposing to return -EOPNOTSUPP and make ls happy
When converting the termios structure between host and target in
target_to_host_termios and host_to_target_termios, the c_cc[] array is
never initialised.
Calling memset() before using it allows to run successfully "stty echo /
stty -echo" on arm-linux-user target (host being x86 and mips).
Mika Westerberg [Tue, 7 Apr 2009 13:57:29 +0000 (16:57 +0300)]
linux-user: strace now handles guest strings correctly [v2]
- to not to break strace with GUEST_BASE is set:
- Strace now can load and print guest strings correctly.
- Added printing support for commonly used flags in some syscalls
(e.g open, creat, mmap etc.)
v2:
- fix strace.c build on etch
- add futex print to strace
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
Mika Westerberg [Tue, 7 Apr 2009 06:57:11 +0000 (09:57 +0300)]
linux-user: implemented ELF coredump support for ARM target
When target process is killed with signal (such signal that
should dump core) a coredump file is created. This file is
similar than coredump generated by Linux (there are few exceptions
though).
Riku Voipio: added support for rlimit
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Riku Voipio <riku.voipio@iki.fi>
No regressions were observed on either 64bit or 32bit
IA hosts.
Patch based on original patches by:
Kirill A. Shutemov <kirill@shutemov.name>
- Implement shm* syscalls
- Fix and cleanup IPCOP_shm* ipc calls handling
Depends on "export mmap_find_vma for shmat" patch.
Various whitespace uglifications applied to minimize
patch size.
Rename raw_ioctl and raw_aio_ioctl to hdev_ioctl and hdev_aio_ioctl as they
are only used for the host device. Also only add them to the method table
for the cases where we need them (generic hdev if linux and linux CDROM)
instead of declaring stubs and always add them.
Add a bdrv_probe_device method to all BlockDriver instances implementing
host devices to move matching of host device types into the actual drivers.
For now we keep exacly the old matching behaviour based on the devices names,
although we really should have better detetion methods based on device
information in the future.
Instead of declaring one BlockDriver for all host devices declared one
for each type: a generic one for normal disk devices, a Linux floppy
driver and a CDROM driver for Linux and FreeBSD. This gets rid of a lot
of messy ifdefs and switching based on the type in the various removal
device methods.
block.c grows a new method to find the correct host device driver based
on OS-sepcific criteria, which will later into the actual drivers in a
later patch in this series.
raw_open and hdev_open contain the same basic logic. Add a new
raw_open_common helper containing the guts of the open routine
and call it from raw_open and hdev_open.
We use the new open_flags field in BDRVRawState to allow passing
additional open flags to raw_open_common from both.
Both the Linux floppy and the FreeBSD CDROM host device need to store
the open flags so that they can re-open the device later. Store the
open flags unconditionally to remove the ifdef mess and simply the
calling conventions for the later patches in the series.
Andrea Arcangeli [Mon, 15 Jun 2009 11:52:27 +0000 (13:52 +0200)]
fix qemu_aio_flush
qemu_aio_wait by invoking the bh or one of the aio completion
callbacks, could end up submitting new pending aio, breaking the
invariant that qemu_aio_flush returns only when no pending aio is
outstanding (possibly a problem for migration as such).
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Kevin Wolf <kwolf@redhat.com>
Gleb Natapov [Mon, 8 Jun 2009 12:56:04 +0000 (15:56 +0300)]
Add rtc reset function.
On reset:
Periodic Interrupt Enable (PIE) bit is cleared to zero
Alarm Interrupt Enable (AIE) bit is cleared to zero
Update ended Interrupt Flag (UF) bit is cleared to zero
Interrupt Request status Flag (IRQF) bit is cleared to zero
Periodic Interrupt Flag (PF) bit is cleared to zero
Alarm Interrupt Flag (AF) bit is cleared to zero
Square Wave output Enable (SQWE) zero
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Uri Lublin [Mon, 8 Jun 2009 11:28:01 +0000 (14:28 +0300)]
migrate_fd_close: delete associated io-handler before closing the fd
It may happen that the io-handler is still registered. That causes
select() to return with EBADF, not calling handlers for other fds.
The io-handler would be registered when (on the source) the whole state
was written but not yet flushed. For example when using QEMUFileBuffered,
(tcp-migration) there may be data left in a buffer waiting to be transferred.
In such a case buffered_close() calls buffered_flush() which calls
migrate_fd_put_buffer, which may, upon EAGAIN, register migrate_fd_put_notify
as a handler.
Signed-off-by: Uri Lublin <uril@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gleb Natapov [Wed, 10 Jun 2009 12:40:48 +0000 (15:40 +0300)]
Don't use cpu_index as apic_id.
(patch is on top of "Apic creation should not depend on pci" series)
Currently cpu_index is used as cpu apic id on x86. This is incorrect
since apic ids not have to be continuous (they can also encode cpu
hierarchy information). This patch uses cpuid_apic_id for initial apic id
value. For now cpuid_apic_id is set to be equal to cpu_index so behaviour
is fully backward compatible, but it allows us to add qemu option to
provide other values for cpu apic id.
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 11 Jun 2009 09:32:51 +0000 (11:32 +0200)]
xen nic: check tx queue after connect.
Needed for savevm/loadvm + migration: In that case the queue might
already have packets on (re-)connect. The guest wouldn't notify us
because notifications are only sent when stuffing a packet into an
empty queue.
Blue Swirl [Sat, 13 Jun 2009 08:44:31 +0000 (08:44 +0000)]
Fix mingw32 build warnings
Work around buffer and ioctlsocket argument type signedness problems
Suppress a prototype which is unused on mingw32
Expand a macro to avoid warnings from some GCC versions
Anthony Liguori [Wed, 10 Jun 2009 23:05:55 +0000 (18:05 -0500)]
Merge branch 'net-queue'
* net-queue: (28 commits)
virtio-net: Increase filter and control limits
virtio-net: Add new RX filter controls
virtio-net: MAC filter optimization
virtio-net: Fix MAC filter overflow handling
virtio-net: reorganize receive_filter()
virtio-net: Use a byte to store RX mode flags
virtio-net: Add version_id 7 placeholder for vnet header support
virtio-net: implement rx packet queueing
net: make use of async packet sending API in tap client
net: add qemu_send_packet_async()
net: split out packet queueing and flushing into separate functions
net: return status from qemu_deliver_packet()
net: add return value to packet receive handler
net: pass VLANClientState* as first arg to receive handlers
net: re-name vc->fd_read() to vc->receive()
net: add fd_readv() handler to qemu_new_vlan_client() args
net: only read from tapfd when we can send
net: vlan clients with no fd_can_read() can always receive
net: move the tap buffer into TAPState
net: factor tap_read_packet() out of tap_send()
...
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Tue, 9 Jun 2009 21:24:57 +0000 (18:24 -0300)]
Fix "defined but not used" warning
The function qemu_calculate_timeout() is only used when CONFIG_IOTHREAD
is not defined. When CONFIG_IOTHREAD is defined, we have the following
warning:
vl.c:4389: warning: ‘qemu_calculate_timeout’ defined but not used
This change fixes that by moving the #ifdef/#endif from main_loop()
into qemu_calculate_timeout(). This encapsulates the logic and allow
us to use qemu_calculate_timeout() when CONFIG_IOTHREAD is defined
or not (suggested by Glauber Costa).
projects / qemu-xen-4.5-testing.git / log