Michal Privoznik [Fri, 15 Aug 2014 10:26:09 +0000 (12:26 +0200)]
daemon: Fix driver registration ordering
There are some stateless drivers which implement subdrivers
(typically vbox and its own network and storage subdrivers). However,
as of ba5f3c7c8ecc10 the vbox driver lives in the daemon, not the
client library. This means, in order for vbox (or any stateless domain
driver) to use its subdrivers, it must register before the general
drivers. Later, when the virConnectOpen function goes through the
subdrivers, stateless drivers are searched first. If the connection
request is aiming at stateless driver, it will be opened. Otherwise
the generic subdriver is opened.
The other change done in this commit is moving interface module load a
bit earlier to match the ordering in case libvirt is built without
driver modules.
Reported-by: Taowei Luo <uaedante@gmail.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Taowei [Mon, 11 Aug 2014 10:07:07 +0000 (18:07 +0800)]
vbox: Rewrite vboxNode functions
Four functions are rewrite in this patch, that is:
vboxNodeGetInfo
vboxNodeGetCellsFreeMemory
vboxNodeGetFreeMemory
vboxNodeGetFreePages
Since these functions has nothing to do with vbox,
it can be directly moved to vbox_common.c. So, I
merged these things into one patch.
Taowei [Mon, 11 Aug 2014 10:06:53 +0000 (18:06 +0800)]
vbox: Rewrite vboxDomainSnapshotCreateXML
The vboxDomainSnapshotCreateXML integrated the snapshot redefine
with this patch:
http://www.redhat.com/archives/libvir-list/2014-May/msg00589.html
This patch introduced vboxSnapshotRedefine in vboxUniformedAPI to
enable the features.
This patch replace all version specified APIs to the uniformed api,
then, moving the whole implementation to vbox_common.c. As there
is only API level changes, the behavior of the function doesn't
change.
Some old version's defects has brought to the new one. The already
known things are:
*goto cleanup in a loop without releasing the pointers in the
loop.
*When function failed after machine unregister, no roll back
to recovery it and the virtual machine would disappear.
Taowei [Mon, 11 Aug 2014 10:06:06 +0000 (18:06 +0800)]
vbox: Rewrite vboxDomainSave
All vbox objects are child objects from the nsISupports in vbox's
C++ API version. Since the CAPI is generated from the C++ API, I
kept their relationship here, by the definitations below:
typedef struct nsISupports nsISupports;
typedef nsISupports IVirtualBox;
typedef nsISupports ISession;
and so on...
So, when calling the API from nsISupports, we don't need to do
typecasting, and things work still work well.
Laine Stump [Thu, 14 Aug 2014 16:34:23 +0000 (12:34 -0400)]
network: fix crash when starting a network with no <pf> element
Martin Kletzander pointed out in email that my commit 2a193f64
introduced a crash in networkCreateInterfacePool() during startup of
any network that doesn't have a <pf> subelement of its <forward>
element. He also supplied a patch.
Kiarie Kahurani [Mon, 11 Aug 2014 21:21:31 +0000 (00:21 +0300)]
src/xenxs: Refactor code formating CPU config
introduce functions
xenFormatXMCPUAllocation(virConfPtr conf, ......);
xenFormatXMCPUFeatures(virConfPtr conf, ......);
which formats CPU allocation and features config
Signed-off-by: Kiarie Kahurani <davidkiarie4@gmail.com> Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Jianwei Hu [Wed, 13 Aug 2014 08:10:43 +0000 (16:10 +0800)]
Maximum vlanid should be 4095 in interface.rng
The correct vlanid range is 0~4095.
After merging this patch, we can not validate a interface xml with vlanid >= 4096.
[root@localhost ~]# cat vlan.xml
<interface type='vlan' name='eno1.4096'>
<start mode='onboot'/>
<protocol family='ipv4'>
<dhcp/>
</protocol>
<vlan tag='4096'>
<interface name='eno1'/>
</vlan>
</interface>
[root@localhost ~]# virt-xml-validate vlan.xml
vlan.xml:1: element interface: Relax-NG validity error : Invalid sequence in interleave
vlan.xml:6: element vlan: Relax-NG validity error : Element interface failed to validate content
vlan.xml:6: element vlan: Relax-NG validity error : Element vlan failed to validate attributes
vlan.xml fails to validate
[root@localhost ~]#
Here is a ip command help on this.
[root@localhost /]# ip link add link eno1 name eno1.90 type vlan help
Usage: ... vlan [ protocol VLANPROTO ] id VLANID [ FLAG-LIST ]
[ ingress-qos-map QOS-MAP ] [ egress-qos-map QOS-MAP ]
VLANPROTO: [ 802.1Q / 802.1ad ]
VLANID := 0-4095
FLAG-LIST := [ FLAG-LIST ] FLAG
FLAG := [ reorder_hdr { on | off } ] [ gvrp { on | off } ] [ mvrp { on | off } ]
[ loose_binding { on | off } ]
QOS-MAP := [ QOS-MAP ] QOS-MAPPING
QOS-MAPPING := FROM:TO
LXC: Fix virLXCControllerSetupDevPTS() wrt user namespaces
The gid value passed to devpts has to be translated by hand as
virLXCControllerSetupDevPTS() is called before setting up the user
and group mappings.
Otherwise devpts will use an unmapped gid and openpty()
will fail within containers.
Linux kernel commit 23adbe12
("fs,userns: Change inode_capable to capable_wrt_inode_uidgid")
uncovered that issue.
Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Ján Tomko <jtomko@redhat.com>
Jincheng Miao [Thu, 14 Aug 2014 03:37:45 +0000 (11:37 +0800)]
build: force configure failed when perl is missing
Perl is necessary to our build processing, it will invoke a lot of
generating script, like: gendispatch.pl. If perl is missing, it's
ok for build from git checkout, because autogen.sh will tell you.
But for compiling from a release tarball, configure will just record
a missing message, and continue, then build failed, like:
https://www.redhat.com/archives/libvirt-users/2014-August/msg00050.html
So need to enhance configure script to handle this negative case.
Reported-by: Hongbin Lu <hongbin@savinetwork.ca> Signed-off-by: Jincheng Miao <jmiao@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Mo yuxiang [Thu, 14 Aug 2014 07:55:34 +0000 (15:55 +0800)]
conf: fix parsing 'cmd_per_lun' and 'max_sectors'
commit d9504941 introduces two new attributes "cmd_per_lun" and
"max_sectors" same with the names QEMU uses for virtio-scsi.
But the case of parsing them is not exact. Change to parse
them if controller has "driver" element.
This patch changes the setmaxmem function to support the '--live',
'--config', and '--current' flags by revectoring the code through
the setmem function using the VIR_DOMAIN_MEM_MAXIMUM flag. The
setmem code is refactored to handle both cases depending on the flag.
The changed maxmem code for the MEM_MAXIMUM path will not allow
modification to the memory values of an active guest unless the --config
switch is used.
Peter Krempa [Tue, 12 Aug 2014 14:10:39 +0000 (16:10 +0200)]
daemon: Limit default log level to journald to VIR_LOG_INFO
Libvirt is really chatty when the DEBUG log level is enabled. When a
host uses journald we'd enable debug logging to journald when only
specifying the debug log level. As journald may employ rate throttling
this would lock up the daemon until it's able to flush all debug
messages.
This patch changes the default log level to VIR_LOG_INFO when using the
default (unconfigured) log output to journald.
To still allow debug logging to journald the user now has to explicitly
specify journald as a log output with priority 1 in the "log_outputs"
configuration option. This patch also changes the config file template
to be explicit about this change and notify the user about the possible
consequence of debug logging into journald.
Michal Privoznik [Tue, 12 Aug 2014 15:39:52 +0000 (17:39 +0200)]
qemu_conf: Undefine the correct symbol
At the beginning of the qemu config file parsing function there
are 3 helper macros defined: GET_VALUE_BOOL, GET_VALUE_LONG and
GET_VALUE_STR. Later, when they are no longer needed they are
undefined in order to keep the namespace clean. However, the
GET_VALUE_STRING is undefined instead of GET_VALUE_STR.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
The 'actualpoolname' value is a name of the pool on the system,
such as shown by 'zpool list' command. Target makes no sense
here because volumes path is always /dev/zvol/$poolname/$volname.
User has to create a pool on his own, this driver doesn't
support pool creation currently.
A volume could be used with Qemu by adding an entry like this:
Peter Krempa [Tue, 12 Aug 2014 13:21:56 +0000 (15:21 +0200)]
qemu: migration: Check domain live state after exitting the monitor
In qemuMigrationToFile we enter the monitor multiple times and don't
check if the VM is still alive after returning form the monitor. Add the
checks to skip pieces of code in case the VM crashes while saving it's
state.
Peter Krempa [Tue, 12 Aug 2014 12:31:26 +0000 (14:31 +0200)]
qemu: managedsave: Check that VM is alive after entering async job
Saving a shutoff VM doesn't make sense and libvirtd crashes while
attempting to do that. Check that the domain is alive after entering
the save async job.
There's this <driver/> element under <interface/> which can have
several attributes. However, the driver element is currently formated
only if the driver's name or txmode has been specified. This makes
only a little sense as we parse even partial <driver/>, for instance:
Eric Blake [Mon, 11 Aug 2014 21:42:45 +0000 (15:42 -0600)]
docs: use correct hints per bus type in <disk> examples
Commit 4cf53158 tried to set up unique labels per disk in the
example, but ended up choosing strings that don't correspond
to the usual choice of bus types. Tweak the strings once again.
projects / libvirt.git / log