This was fixing a problem with old versions of mingw which had a
pthread.h that polluted the namespace with random symbols. This is no
longer relevant on our mingw platform targets.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This fixes a problem on mingw where it doesn't know how to report
certain errnos defined by POSIX, but not used on Windows. These are
not a real problem for libvirt.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
While the motivation of the original commit is fine, we are intending to
drop autoconf in favour of meson, and similarly wish to drop use of
gnulib. Removing this feature is part of that conversion work.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
stpcpy returns a pointer to the end of the string just copied
which in theory makes it easier to then copy another string
after it. We only use stpcpy in one place though and that
is trivially rewritten to avoid stpcpy with no loss in code
clarity or efficiency.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The mktempd module in gnulib provides an equivalent to 'mktemp -d' on
platforms which lack this shell command. All platforms on which libvirt
runs the affected tests have 'mktemp -d' support, so the gnulib module
is not required.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The getopt-posix module fixes a problem with optind being incorrectly
set after a failed option parse. It was also previously used to allow
the bhyve driver to access a private internal reentrant getopt impl.
None of this matters to libvirt code any more.
This command is hooked into the virsh hypervisor-cpu-compare command.
As such, the CPU model XML provided to the command will be compared
to the hypervisor CPU contained in the QEMU capabilities file for the
appropriate QEMU binary (for s390x, this CPU definition can be observed
via virsh domcapabilities).
QMP will report that the XML CPU is either identical to, a subset of,
or incompatible with the hypervisor CPU. s390 can also report that
the XML CPU is a "superset" of the hypervisor CPU. This response is
presented as incompatible, as this CPU model would not be able to run
on the hypervisor.
Signed-off-by: Collin Walling <walling@linux.ibm.com> Reviewed-by: Daniel Henrique Barboza <danielh413@gmail.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.ibm.com>
Message-Id: <1568924706-2311-15-git-send-email-walling@linux.ibm.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Interfaces with QEMU to compare CPU models. The command takes two CPU
models, A and B, that are given a model name and an optional list of
CPU features. Through the query-cpu-model-comparison command issued
via QMP, a result is produced that contains the comparison evaluation
string (identical, superset, subset, incompatible).
The list of properties (aka CPU features) that is returned from the QMP
response is ignored.
This command is hooked into the virsh hypervisor-cpu-baseline command.
The CPU models provided in the XML sent to the command will be baselined
via the query-cpu-model-baseline QMP command. The resulting CPU model
will be reported.
Interfaces with QEMU to baseline CPU models. The command takes two
CPU models, A and B, that are given a model name and an optional list
of CPU features. Through the query-cpu-model-baseline command issued
via QMP, a result is produced that contains a new baselined CPU model
that is guaranteed to run on both A and B.
Some older s390 CPU models (e.g. z900) will not report props as a
response from query-cpu-model-expansion. As such, we should make the
props field optional when parsing the return data from the QMP response.
qemu_monitor: add features to CPU model for QMP command
query-cpu-model-baseline/comparison will accept a list of features
as part of the command. Since CPUs may be defined with CPU feature
policies, let's parse it to the appropriate boolean that the QMP
command expects.
A feature that is set to required, force, or if it is a hypervisor
CPU feature (-1), then set the property value to true. Otherwise
(optional, disabled) set the value to false.
qemu_monitor: use cpu def instead of char for expansion
When expanding a CPU model via query-cpu-model-expansion, any features
that were a part of the original model are discarded. For exmaple,
when expanding modelA with features f1, f2, a full expansion may reveal
feature f3, but the expanded model will not include f1 or f2.
Let's pass a virCPUDefPtr to the expansion function in preparation for
taking features into consideration.
Pavel Mores [Mon, 30 Sep 2019 13:41:01 +0000 (15:41 +0200)]
remove a now redundant call to virDiskNameToIndex()
Parseability of disk name is now checked in qemuDomainDeviceDefValidateDisk().
Signed-off-by: Pavel Mores <pmores@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pavel Mores [Mon, 30 Sep 2019 13:41:00 +0000 (15:41 +0200)]
qemu: Refuse partitions in disk targets
The way in which the qemu driver generates aliases for disks involves
ignoring the partition number part of a target dev name. This means that
all partitions of a block device and the device itself all end up with the
same alias. If multiple such disks are specified in XML, the resulting
name clash makes qemu invocation fail.
Since attaching partitions to qemu VMs doesn't seem to make much sense
anyway, disallow partitions in target specifications altogether.
Signed-off-by: Pavel Mores <pmores@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
remote: don't pull anonymous enums into rpc protocol structs
The VIR_TYPED_PARAM_* enum fields are defined in libvirt-common.h, not
in the remote protcol, so shouldn't be part of the protocol structs
output check. This avoids similar problems hitting when we add use of
glib, which has other such anonymous enums.
Reviewed-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
docs: attempt to document the general libvirt dev strategy
There are various ideas / plans floating around for future libvirt work,
some of which is actively in progress. Historically we've never captured
this kind of information anywhere, except in mailing list discussions.
In particular guidelines in hacking.html.in don't appear until a policy
is actively applied.
This patch attempts to fill the documentation gap, by creating a new
"strategy" page which outlines the general vision for some notable
future changes. The key thing to note is that none of the stuff on this
page is guaranteed, plans may change as new information arises. IOW this
is a "best guess" as to the desired future.
This doc has focused on three areas, related to the topic of language
usage / consolidation
- Use of non-C languages for the library, daemons or helper tools
- Replacement of autotools with meson
- Use of RST and Sphinx for documentation (website + man pages)
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Use virBufferEscapeShell in virNetSocketNewConnectSSH
to escape the netcat command since it's passed to the shell. Adjust
expected test case output accordingly.
While the intention of this change was good, the result is broken as it
is still underquoted.
On the SSH server side, SSH itself runs the command via the shell.
Our command is then invoking the shell again. Thus we see
$ virsh -c qemu+ssh://root@domokun/system?netcat=%2Ftmp%2Ffo%20o%2Fnc list
error: failed to connect to the hypervisor
error: End of file while reading data: sh: /tmp/fo: No such file or directory: Input/output error
With the second level of escaping added we can now successfully use a nc
binary with a space in the path.
The original test case added was misleading as it illustrated using a
binary path of 'nc -4' which is not a path, it is a command with a
separate argument, which is getting interpreted as a path.
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Thu, 12 Sep 2019 11:07:31 +0000 (13:07 +0200)]
qemu_capabilities: Put only unique FW images into domcaps
In the domain capabilities XML there are FW image paths printed.
There are two sources for the image paths (in order of
preference):
1) firmware descriptor files - as returned by
qemuFirmwareGetSupported()
2) a compile time list of FW:NRAM pairs which can be overridden
in qemu.conf
If either of those contains a duplicate FW image path (which is
a valid use case) it is printed twice in the capabilities XML.
While it's technically not a bug, it doesn't look good.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Tested-by: Kashyap Chamarthy <kchamart@redhat.com> Reviewed-by: Andrea Bolognani <abologna@redhat.com>
Peter Krempa [Mon, 30 Sep 2019 14:22:08 +0000 (16:22 +0200)]
qemu: snapshot: Don't update current snapshot until we're done
Since commit f105627992e we store whether a snapshot is current globally
rather than locally in the snapshot object.
This means that we don't have to unset the current snapshot prior to
taking/reverting the snapshot and we can do it only when everything is
done successfully.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
The NVDIMM backend file can be a normal file or a real device file,
Current xml example and explainations may mislead users. So add more
info about the NVDIMM related elements and update the xml examples.
Signed-off-by: Luyao Zhong <luyao.zhong@intel.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Chris Coulson [Tue, 24 Sep 2019 19:25:14 +0000 (20:25 +0100)]
security: AppArmor profile fixes for swtpm
The AppArmor profile generated by virt-aa-helper is too strict for swtpm.
This change contains 2 small fixes:
- Relax append access to swtpm's log file to permit write access instead.
Append access is insufficient because the log is opened with O_CREAT.
- Permit swtpm to acquire a lock on its lock file.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Since the test suite does not invoke qemuExtDevicesStart(), no
vhost_user_fd will be present when generating test XML. To deal
with this we can must a fake FD number. While the current XML
is using FD == 0, we pick a very interesting number that's unlikely
to be a real FD, so that we're more likely to see any mistakes
closing the invalid FD.
Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Thu, 26 Sep 2019 13:53:39 +0000 (15:53 +0200)]
qemu: monitor: Add transaction generators for dirty bitmap APIs
Rather than generating the transaction contents in random places add a
unified set of APIs to generate the contents for a 'transaction' for the
dirty bitmap APIs.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Peter Krempa [Thu, 26 Sep 2019 12:08:11 +0000 (14:08 +0200)]
qemu: domain: Base block job interlocking on QEMU_CAPS_INCREMENTAL_BACKUP
The QEMU_CAPS_INCREMENTAL_BACKUP will be enabled once all bits of the
incremental backup feature work as expected which means also properly
interacting with blockjobs and snapshots.
Thus we can allow blockjobs and snapshots if QEMU_CAPS_INCREMENTAL_BACKUP
is present even when checkpoints exist.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Peter Krempa [Thu, 26 Sep 2019 11:25:40 +0000 (13:25 +0200)]
qemu: checkpoint: Forbid creating checkpoints until we support backups
Checkpoints by themselves are not very useful for anything else than
testing the few bitmap interactions that are currently implemented.
It's very unlikely that anybody used this feature and thus we can
disable it until we have a more complete implementation ready.
Additionally the code for deleting checkpoints has many broken failure
scenarios which should be fixed first. This will require support of
deleting a bitmap in a qemu 'transaction' which was not released yet.
Curious users obviously can use the qemu namespace in the XML to enable
this for experiments:
Peter Krempa [Thu, 26 Sep 2019 11:21:00 +0000 (13:21 +0200)]
qemu: checkpoint: Remove open-ended TODOs
Once somebody is motivated enough to add the support for the quiesce
flag or offline checkpoint deletion they are welcome to do so but we
don't need to have a reminder.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
Peter Krempa [Thu, 19 Sep 2019 14:49:21 +0000 (16:49 +0200)]
qemu: driver: Move checkpoint-related code to qemu_checkpoint.c
Move all extensive functions to a new file so that we don't just pile
everything in the common files. This obviously isn't possible with
straight code movement as we still need stubs in qemu_driver.c
Additionally some functions e.g. for looking up a checkpoint by name
were so short that moving the impl didn't make sense.
Note that in the move the new file also doesn't use
virQEMUMomentReparent but rather an stripped down copy. As I plan to
split out snapshot code into a separate file the unification doesn't
make sense any more.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
remote: forbid the --listen arg when systemd socket activation
In this change we forgot that virtproxyd doesn't have a --listen
parameter, and instead behaves as if it was always present. Thus
when systemd socket activation is present, we must disable this
built-in default
Reviewed-by: Erik Skultety <eskultet@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Tue, 16 Jul 2019 10:06:20 +0000 (12:06 +0200)]
tools: Record NSS dependency on symbols file
If a symbol file for either of NSS modules is changed then
subsequent 'make' doesn't regenerate the library, because there
is no implicit dependency between the library and symbols file.
Put an explicit dependency into the Makefile then. Unfortunately,
setting _DEPENDENCIES makes us lose automake's generated
dependencies (see src/Makefile.am:592 for details). But
fortunately, the only dependency we had was _LIBADD variable.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com>
Michal Privoznik [Sat, 28 Sep 2019 19:24:53 +0000 (21:24 +0200)]
nss: Drop needless free() in gethostbyname3()
The findLease() function allocates @addr array iff no error
occurred and at least one satisfactory record was found.
Therefore, there is no need to call free() if findLease() failed,
or did not find any records as addr == NULL.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com>
Michal Privoznik [Sat, 28 Sep 2019 18:46:08 +0000 (20:46 +0200)]
nss: Compare addresses iff their family matches
When parsing leases file, appendAddr() is called to append parsed
tuple (address, expiry time, family) into an array. Whilst doing
so, the array is searched for possible duplicate. This is done by
comparing each item of the array by passed @family: if @family is
AF_INET then the item is viewed as IPv4 address. Similarly, if
@family is AF_INET6 then the item is viewed as IPv6 address. This
is not exactly right - the array can contain addresses of both
families and thus the address family of each item of the array
must be considered.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com>
The cgroupv2 code mishandles that first line in the second case, which
causes VM startup to fail with: Unable to read from
'/sys/fs/cgroup/machine/cgroup.controllers': No such file or directory
The kernel docs[1] say that the cgroupv2 path will always start with
'0::', which in the code here controllers="". Only set the v2 placement
path when we see that cgroup file entry.
Michal Privoznik [Fri, 27 Sep 2019 11:29:53 +0000 (13:29 +0200)]
qemu_monitor: s/size_t/ULL/ in qemuMonitorSave{Virtual,Physical}Memory
As it turns out, on my 32bit ARM machine size_t is not the same
size as ULL. However, @length argument for both functions is type
of size_t but it's treated as ULL - for instance when passed to
qemuMonitorJSONMakeCommand(). The problem is that because of
"U:size" the virJSONValueObjectAddVArgs() expects an ULL argument
but on the stack there are size_t and char * arguments (which
coincidentally add up to size of ULL). So the created command has
only two arguments "val" and incorrect "size" and no "path" which
is required.
I've tried to find other occurrences of this pattern but at the
rest of places where size_t is used it tracks size of an array so
that's safe.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> ACKed-by: Peter Krempa <pkrempa@redhat.com>
Laine Stump [Fri, 20 Sep 2019 22:15:19 +0000 (18:15 -0400)]
conf: refresh network ports missing from network driver on restart
Before the refactoring that properly separated the network driver from
the hypervisor driver and forced all interaction to go through public
APIs, all network usage counters were zeroed when the network driver
was initialized, and the network driver's now-deprecated
"semi-private" API networkNotifyActualDevice() was called for every
interface of every domain as each hypervisor "reconnected" its domains
during a libvirtd restart, and this would refresh the usage count for
each network.
Post-driver-split, during libvirtd restart/reconnection of the running
domains, the function virDomainNetNotifyActualDevice() is called by
each hypervisor driver for every interface of every domain restart,
and this function has code to re-register interfaces, but it only
calls into the network driver to re-register those ports that don't
already have a valid portid (ie. one that is not simply all 0),
assuming that those with valid portids are already known (and counted)
by the network driver.
commit 7ab9bdd47 recently modified the network driver so that, in most
cases, it properly resyncs each network's connection count during
libvirtd (or maybe virtnetworkd) restart by iterating through the
network's port list. This doesn't account for the case where a network
is destroyed and restarted while there are running domains that have
active ports on the network. In that case, the entire port list and
connection count for that network is lost, and now even a restart of
libvirtd/virtnetworkd/virtqemud, which in the past would resync the
connection count, doesn't help (the network driver thinks there are no
active ports, while the hypervisor driver knows about all the active
ports, but mistakenly believes that the network driver also knows).
The solution to this is to not just bypass valid portids during the
call to virDomainNetworkNotifyActualDevice(). Instead, we query the
network driver about the portid that was preserved in the domain
status, and if it is not registered, we register it.
(NB: while it would technically be correct to just generate a new
portid for these cases, it makes for less churn in portids (and thus
may make troubleshooting simpler) if we make the small fix to
virDomainNetDefActualToNetworkPort() that preserves existing valid
portids rather than unconditionally generating a new one.)
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
driver.c: change URI validation to handle QEMU and vbox case
The existing QEMU and vbox URI path validation consider
that a privileged user can use both a "/system" and a
"/session" URI. This differs from all the other drivers
that forbids the root user to use "/session" URI.
Let's update virConnectValidateURIPath() to handle these
cases as exceptions, using the already existent 'entityName'
value to handle "QEMU" and "vbox" differently. This allows
us to use the validateURI function in these cases without
changing the existing behavior of other drivers.
Laine Stump [Wed, 25 Sep 2019 16:42:51 +0000 (12:42 -0400)]
conf: utility function to update entry in def->nets array
A virDomainNetDef object in a domain's nets array might contain a
virDomainHostdevDef, and when this is the case, the domain's hostdevs
array will also have a pointer to this embedded hostdev (this is done
so that internal functions that need to perform some operation on all
hostdevs won't leave out the type='hostdev' network interfaces).
When a network device was updated with virDomainUpdateDeviceFlags(),
we were replacing the entry in the nets array (and free'ing the
original) but forgetting about the pointer in the hostdevs array
(which would then point to the now-free'd hostdev contained in the old
net object.) This often resulted in a libvirtd crash.
The solution is to add a function, virDomainNetUpdate(), called by
qemuDomainUpdateDeviceConfig(), that updates the hostdevs array
appropriately along with the nets array.
Michal Privoznik [Thu, 26 Sep 2019 14:17:49 +0000 (16:17 +0200)]
domain_conf: Unref video private data in virDomainVideoDefClear()
The private data for video definition is created in
virDomainVideoDefNew() and we attempt to free it in
virDomainVideoDefFree(). This seems to work, except
the free function calls clear function which zeroes
out the whole structure and thus virObjectUnref()
which is called on private data does nothing.
2,568 bytes in 107 blocks are definitely lost in loss record 207 of 213
at 0x4A35476: calloc (vg_replace_malloc.c:752)
by 0x50A6048: virAllocVar (viralloc.c:346)
by 0x513CC5A: virObjectNew (virobject.c:243)
by 0x4DC1DEE: qemuDomainVideoPrivateNew (qemu_domain.c:1337)
by 0x51A6BD6: virDomainVideoDefNew (domain_conf.c:2831)
by 0x51B9F06: virDomainVideoDefParseXML (domain_conf.c:15541)
by 0x51CB761: virDomainDefParseXML (domain_conf.c:21158)
by 0x51C5973: virDomainDefParseNode (domain_conf.c:21708)
by 0x51C583A: virDomainDefParse (domain_conf.c:21663)
by 0x51C58AE: virDomainDefParseFile (domain_conf.c:21688)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com>
Peter Krempa [Thu, 19 Sep 2019 08:36:28 +0000 (10:36 +0200)]
qemu: Use virTypedParamList in the bulk stats gathering functions
The bulk stats functions are specific as they pass around the list into
many sub-functions and also a substantial amount of the entries uses
formatted names for indexing purposes. This makes them ideal to be
converted to the new virTypedParamList helpers.
Unfortunately given how the functions are used this requires a big-bang
rewrite of all of the calls to add entries to the parameter list.
Given that a substantial simplification is achieved as well as a pretty
significant change to the original code is required some macros which
were used only sporadically were replaced by inline calls rather than
tweaking the macros first and deleting them later.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
projects / libvirt.git / log