Eric Blake [Sun, 17 Mar 2019 03:57:45 +0000 (22:57 -0500)]
test: Avoid use-after-free on virDomainSnapshotDelete
The following virsh command was triggering a use-after-free:
$ virsh -c test:///default '
snapshot-create-as test s1
snapshot-create-as test s2
snapshot-delete --children-only test s1
snapshot-current --name test'
Domain snapshot s1 created
Domain snapshot s2 created
Domain snapshot s1 children deleted
error: name in virGetDomainSnapshot must not be NULL
I got lucky on that run - although the error message is quite
unexpected. On other runs, I was able to get a core dump, and
valgrind confirms there is a definitive problem.
The culprit? We were inconsistent about whether we set
vm->current_snapshot, snap->def->current, or both when updating how
the current snapshot was being tracked. As a result, deletion did not
see that snapshot s2 was previously current, and failed to update
vm->current_snapshot, so that the next API using the current snapshot
failed because it referenced stale memory for the now-gone s2 (instead
of the intended s1).
The test driver code was copied from the qemu code (which DOES track
both pieces of state everywhere), but was purposefully simplified
because the test driver does not have to write persistent snapshot
state to the file system. But when you realize that the only reason
snap->def->current needs to exist is when writing out one file per
snapshot for qemu, it's just as easy to state that the test driver
never has to mess with the field (rather than chasing down which
places forgot to set the field), and have vm->current_snapshot be the
sole source of truth in the test driver.
Ideally, I'd get rid of the 'current' member in virDomainSnapshotDef,
as well as the 'current_snapshot' member in virDomainDef, and instead
track the current member in virDomainSnapshotObjList, coupled with
writing ALL snapshot state for qemu in a single file (where I can use
<snapshots current='...'> as a wrapper, rather than
VIR_DOMAIN_SNAPSHOT_FORMAT_INTERNAL to output <current>1</current> XML
on a per-snapshot file basis). But that's a bigger change, so for now
I'm just patching things to avoid the test driver segfault.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
rpm: fix upgrades when RBD is disabled in a new version
We previously had to disable RBD on 32-bit platforms since Ceph has
dropped all support for 32-bit. Unfortunately anyone with the RPM
libvirt-daemon-driver-storage-rbd installed on 32-bit now has a
broken upgrade path.
To fix this we must make libvirt-daemon-driver-storage-core
have an Obsoletes: libvirt-daemon-driver-storage-rbd < $VER-$REL
Reviewed-by: Erik Skultety <eskultet@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Peter Krempa [Fri, 15 Mar 2019 15:33:38 +0000 (16:33 +0100)]
conf: Fold private data parsing into virDomainStorageSourceParse
Storage source private data can be parsed along with other components of
private data rather than a separate function which is called from
multiple places.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Andrea Bolognani [Tue, 19 Mar 2019 16:29:18 +0000 (17:29 +0100)]
conf: Drop unused variable
The refresh_volume_allocation variable in
virStoragePoolDefParseXML() has been unused since its
introduction in commit 669018bc9cb1, and Clang rightfully
complains about this fact.
Signed-off-by: Andrea Bolognani <abologna@redhat.com>
Jason Dillaman [Tue, 19 Mar 2019 13:42:17 +0000 (09:42 -0400)]
storage: optional 'refresh' elemement on pool
The new 'refresh' element can override the default refresh operations
for a storage pool. The only currently supported override is to set
the volume allocation size to the volume capacity. This can be specified
by adding the following snippet:
network: avoid trying to create global firewall rules if unprivileged
The unprivileged libvirtd does not have permission to create firewall
rules, or bridge devices, or do anything to the host network in
general. Historically we still activate the network driver though and
let the network start API call fail.
The startup code path which reloads firewall rules on active networks
would thus effectively be a no-op when unprivileged as it is impossible
for there to be any active networks
With the change to use a global set of firewall chains, however, we now
have code that is run unconditionally.
Ideally we would not register the network driver at all when
unprivileged, but the entanglement with the virt drivers currently makes
that impractical. As a temporary hack, we just make the firewall reload
into a no-op.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
network: split setup of ipv4 and ipv6 top level chains
During startup libvirtd creates top level chains for both ipv4
and ipv6 protocols. If this fails for any reason then startup
of virtual networks is blocked.
The default virtual network, however, only requires use of ipv4
and some servers have ipv6 disabled so it is expected that ipv6
chain creation will fail. There could equally be servers with
no ipv4, only ipv6.
This patch thus makes error reporting a little more fine grained
so that it works more sensibly when either ipv4 or ipv6 is
disabled on the server. Only the protocols that are actually
used by the virtual network have errors reported.
Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
network: improve error report when firewall chain creation fails
During startup we create some top level chains in which all
virtual network firewall rules will be placed. The upfront
creation is done to avoid slowing down creation of individual
virtual networks by checking for chain existance every time.
There are some factors which can cause this upfront creation
to fail and while a message will get into the libvirtd log
this won't be seen by users who later try to start a virtual
network. Instead they'll just get a message saying that the
libvirt top level chain does not exist. This message is
accurate, but unhelpful for solving the root cause.
This patch thus saves any error during daemon startup and
reports it when trying to create a virtual network later.
Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
The rbd_list method has a quite unpleasant signature returning an
array of strings in a single buffer instead of an array. It is
being deprecated in favour of rbd_list2. To maintain clarity of
code when supporting both APIs in parallel, split the rbd_list
code out into a separate method.
In splitting this we now honour the rbd_list failures.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cole Robinson [Wed, 6 Mar 2019 23:11:01 +0000 (18:11 -0500)]
conf: domcaps: Add virCapsEnum 'report'
virCapsEnum report is an internal bool indicating whether we
should format the enum in the XML at all. This is unused for
now but will be handled in future patches.
We use a plain bool instead of tristate because the case here
is a bit different than the explicit @supported output. We
already report the equivalent of supported=YES|NO based on
what enum values are filled in. This adds report=false to
handle the ABSENT case.
Acked-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
Cole Robinson [Tue, 19 Feb 2019 19:12:47 +0000 (14:12 -0500)]
conf: domcaps: Don't output XML on tristate ABSENT
Change domcaps to skip formatting XML if the default
TRISTATE_BOOL_ABSENT is found. Now when domcaps is extended, driver
XML output won't change until an explicit TRISTATE_BOOL value is set
in driver code.
Acked-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
Cole Robinson [Tue, 19 Feb 2019 17:52:30 +0000 (12:52 -0500)]
tests: domcaps: Remove 'full' test
The 'full' test verifies the output of a virDomainCapsPtr built
by hand. It has the following problems:
The domcaps test suite nowadays has 3 hypervisor driver implementations
which should give us plenty of opportunity to get full domcaps coverage.
I don't think this test has much value. And it has the following issues:
- Requires manual intervention to test new domcaps XML, which is easy
to miss, for example gic bits aren't covered there.
- The SET_ALL_BITS trick it uses to fill in enums will output
values that are never reported by any driver implementation
(strings like 'default')
Let's remove it
Acked-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
Cole Robinson [Tue, 19 Feb 2019 17:44:34 +0000 (12:44 -0500)]
tests: domcaps: Add a default 'empty' test
The 'empty' demonstrates XML generated when only bare minimum caps
data has been filled in. This will demonstrate changes that alter
the default XML output.
Acked-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
Michal Privoznik [Mon, 18 Mar 2019 13:32:55 +0000 (14:32 +0100)]
node_device_hal.c: Follow _class -> klass rename
In 0eca80e60 _class was renamed to klass for variety of struct
members. However, gather_usb_cap() was missed out in this rename
leaving FreeBSD build broken.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
QEMU security driver usage for sVirt support (James Morris, Dan Walsh, Daniel Berrange)
Originally in the qemudDomainGetSecurityLabel function. It doesn't
appear to have done anything useful back then either. The other two
instances look like copy+paste
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
Michal Privoznik [Thu, 28 Feb 2019 16:35:14 +0000 (17:35 +0100)]
storageVolWipePattern: Don't take shortcut to refreshPool()
In d16f803d780 we've tried to solve an issue that after wiping an
image its format might have changed (e.g. from qcow2 to raw) but
libvirt wasn't probing the image format. We fixed this by calling
virStorageBackendRefreshVolTargetUpdate() which is what
refreshPool() would end up calling. But this shortcut is not good
enough because the function is called only for local types of
volumes (like dir, fs, netfs). But now that more backends support
volume wiping we have to call the function with more caution.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
So far we have two branches: either we zero BLOCK_PER_PACKET
(currently 128) block at once, or if we're close to the last block
then we zero out one block at the time. This is very suboptimal.
We know how many block are there left. Might as well just write
them all at once.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
This info can be useful to filter devices visible
to mgmt clients so that they won't see devices that
unsafe/not meaningful to pass thru.
Provide class info the way it is provided by udev or
kernel that is as single 6-digit hexadecimal.
Class element is not optional. I guess this should not
break users that use virNodeDeviceCreateXML because
they probably specify only scsi_host capability on
input and then node device driver gets other capabilities
from udev after device appeared.
HAL driver does not get support for the new element in
this patch.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Vim treats *.h files as cpp ones with respect to syntax highlighting.
Thus "class" in _virNodeDevCapPCIDev highlighted mistakenly.
This can be fixed by filetype detection code tunables but it
is more convinient to skip this tuning by every project member.
Let's just use "klass" as field name instead of _class or class
and add syntax rule.
Signed-off-by: Nikolay Shirokovskiy <nshirokovskiy@virtuozzo.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Michal Privoznik [Thu, 28 Feb 2019 17:07:02 +0000 (18:07 +0100)]
storagePoolRefreshFailCleanup: Clear volumes on failed refresh
If pool refresh failed, then the internal table of volumes is
probably left in inconsistent or incomplete state anyways. Clear
it out then. This has an advantage that we can move the
virStoragePoolObjClearVols() from those very few backends that
do call it.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Michal Privoznik [Thu, 28 Feb 2019 16:43:57 +0000 (17:43 +0100)]
virISCSIDirectReportLuns: Drop ClearVols
In bf5cf610f206d5d54 I've fixed a problem where iscsi-direct
backend was reporting only the last LUN. The fix consisted of
moving virStoragePoolObjClearVols() one level up. However, as it
turns out, storage driver already calls it before calling
refreshPool callback (which is
virStorageBackendISCSIDirectRefreshPool() in this case).
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
iscsi_direct: Don't overwrite error in virStorageBackenISCSIDirectWipeVol()
If virStorageBackendISCSIDirectVolWipeZero() fails, it has
already reported an error which is probably specific enough. Do
not overwrite it with some generic one.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
iscsi_direct: Make virStorageBackendISCSIDirectGetLun report error properly
This function reports error for one of the two error paths. This
is unfortunate as a caller see this function failing but doesn't
know right away if an error was reported.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Pavel Hrdina <phrdina@redhat.com>
Andrea Bolognani [Fri, 15 Mar 2019 15:47:27 +0000 (16:47 +0100)]
Drop support for "Red Hat" init scripts
Despite the misleading name, these were supposed to be used
with a System V style init; however, none of the platforms we
target is using that kind of init anymore: almost all Linux
distributions have switched to systemd, those that haven't
(such as Gentoo and Alpine) are mostly using OpenRC with
custom init scripts, and the BSDs have been doing their own
thing all along.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Eric Blake [Fri, 15 Mar 2019 02:19:18 +0000 (21:19 -0500)]
snapshot: Break out virDomainSnapshotObjList into its own file
snapshot_conf.h was mixing three separate types: the snapshot
definition, the snapshot object, and the snapshot object list.
Separate out the snapshot object list code into its own file, and
update includes for affected clients.
This is just code motion, but done in preparation of sharing a lot of
the object list code with checkpoints.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Eric Blake [Fri, 15 Mar 2019 02:12:51 +0000 (21:12 -0500)]
snapshot: Export two functions prior to file split
The next patch will require access to the helper functions
virDomainSnapshotDefFormatInternal and
virDomainSnapshotRedefineValidate from two different files; make the
file split easier by exporting these functions.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Eric Blake [Fri, 15 Mar 2019 01:03:40 +0000 (20:03 -0500)]
snapshot: Break out virDomainSnapshotObj into its own file
snapshot_conf.h was mixing three separate types: the snapshot
definition, the snapshot object, and the snapshot object list.
Separate out the snapshot object code into its own file, which
includes moving a typedef to avoid circular inclusions.
Mostly straight code motion, although I fixed a comment along
the way, now that virDomainSnapshotForEachDescendent now
guarantees a topological visit (missed in b647d219).
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Eric Blake [Fri, 15 Mar 2019 00:44:34 +0000 (19:44 -0500)]
conf: Split capabilities forward typedefs into virconftypes.h
As explained in the previous patch, collecting pointer typedefs into a
common header makes it easier to avoid circular inclusions. Continue
the efforts by pulling the appropriate typedefs from capabilities.h
into the new header.
This patch is just straight code motion (all typedefs are listed in
the same order before and after the patch); a later patch will sort
things for legibility.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Eric Blake [Fri, 15 Mar 2019 00:44:34 +0000 (19:44 -0500)]
conf: Split domain forward typedefs into virconftypes.h
Right now, snapshot_conf.h is rather large - it deals with three
separate types: virDomainSnapshotDef (the snapshot definition as it
maps to XML), virDomainSnapshotObj (an object containing a def and the
relationship to other snapshots), and virDomainSnapshotObjList (a list
of snapshot objects), where two of the three types are currently
public rather than opaque. What's more, the types are circular: a
snapshot def includes a virDomainPtr, which contains a snapshot list,
which includes a snapshot object, which includes a snapshot def.
In order to split the three objects into separate files, while still
allowing each header to use sane typedefs to incomplete pointers, the
obvious solution is to lift the typedefs into yet another header, with
no other dependencies. Start the split by factoring out all struct
typedefs from domain_conf.h (enum typedefs don't get used in function
signatures, and function typedefs tend not to suffer from circular
referencing, so those stay put). The only other exception is
virDomainStateReason, which is only ever used directly rather than via
a pointer.
This patch is just straight code motion (all typedefs are listed in
the same order before and after the patch); a later patch will sort
things for legibility.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Eric Blake [Fri, 15 Mar 2019 14:41:18 +0000 (09:41 -0500)]
object: Add sanity check on correct parent class
Checking that the derived class is larger than the requested parent
class saves us from some obvious mistakes, but as written, it does not
catch all the cases; in particular, it is easy to forget to update a
VIR_CLASS_NEW when changing the 'parent' member from virObject to
virObjectLockabale, but where the size checks don't catch that. Add a
parameter for one more layer of sanity checking.
It would be cool if we could get gcc to stringize typeof(parent) into
the string name of that type, so that we could confirm that the
precise parent class is in use rather than just a struct that happens
to have the same size as the parent class. But sizeof checks are
better than nothing.
Note that I did NOT change the fact that we require derived classes to
be larger (as the difference in size makes it easy to tell classes
apart), which means that even if a derived class has no functionality
to add (but rather exists for compiler-enforced type-safety), it must
still include a dummy member. But I did fix the wording of the error
message to match the code.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Erik Skultety [Wed, 6 Mar 2019 12:29:01 +0000 (13:29 +0100)]
qemu: command: Override HOME variable for system QEMU
By default, qemu user's home dir points to '/' which shouldn't be used
at all. We therefore pass the HOME variable from the current variable
iff not running as SUID, which means that for systemd we never set it.
This patch makes sure, that for system QEMU this is always set to
libDir/<driver>, session mode is left untouched.
Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Erik Skultety [Fri, 8 Mar 2019 11:15:07 +0000 (12:15 +0100)]
qemu: command: Enforce setting XDG variables for system QEMU
For session mode, only XDG_CACHE_HOME is set, because we want to remain
integrating with services in user session, but for system mode, this
would have become reading/writing to '/' which carries the obvious issue
with permissions (also, '/' is the wrong location in 99.9% cases anyway).
Signed-off-by: Erik Skultety <eskultet@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Some modules/libraries within QEMU could make use of the XDG_ vars when
writing their data to the disk. Define the most common XDG variables
and point them to the specific driver's libDir, i.e.
Peter Krempa [Fri, 15 Mar 2019 14:09:14 +0000 (15:09 +0100)]
qemu: hotplug: Merge virtio and non-virtio disk unplug code
The functions do basically exactly the same thing modulo few checks.
In case of virtio disks we check that the device is not multifunction as
that can't be unplugged at once. In case of USB and SCSI disks we
checked that no active block job is running.
The check for running blockjobs should have also been done for virtio
disks. By moving the multifunction check into the common function we fix
this case and also simplify the code.
Signed-off-by: Peter Krempa <pkrempa@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Eric Blake [Thu, 14 Mar 2019 02:38:52 +0000 (21:38 -0500)]
snapshot: More clarification about REDEFINE
Based on recent list questions about the proposed addition of
virDomainCheckpointCreateXML(REDEFINE), it is worth adding some
clarification to the existing snapshot redefine documentation that is
serving as the basis for checkpoints.
Normal snapshot creation requires very few elements from the user XML
(libvirt can pick sane defaults for items that are omitted, and many
fields, including <domain>, are documented as readonly output fields
ignored on input, produced by drivers that track it). But during
REDEFINE, the API wants the complete XML produced by an earlier
virDomainSnapshotGetXMLDesc; as the domain definition has likely
changed since the snapshot was first created, libvirt is unable to
recreate a <domain> sub-element that matches the original output
representing the domain state at the time the snapshot was first
created. In fact, reverting without a <domain> sub-element is risky
enough that we had to add a FORCE flag for virDomainSnapshotRevert().
In short, we only support omitting domain for qemu because of
backwards-compatibility to snapshots created before 0.9.5 started
capturing <domain>; even though there are other drivers like vbox that
do not output <domain> because they have other reliable ways to
revert.
And based on the confusion caused when omitting <domain> from snapshot
XML, the initial design for checkpoints in later patches will make
<domain> a mandatory element during its REDEFINE.
[Side note: the fact that <domain> can appear in <domainsnapshot> is a
reason we cannot add a new API for a bulk listing or redefine of all
snapshots of a single domain in one XML call (for example, a 1M
<domain> XML * 16 snapshots explodes into 16M in a bulk form, which
gets difficult to send over RPC). Perhaps we could add a flag to
request that the <domain> sub-element be omitted on output, but such
output is no longer suitable for sane REDEFINE input.]
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Eric Blake [Fri, 15 Mar 2019 04:14:41 +0000 (23:14 -0500)]
virobject: Improve documentation
I had to inspect the code to learn whether a final virObjectUnref()
calls ALL dispose callbacks in child-to-parent order (akin to C++
destructors), or whether I manually had to call a parent-class dispose
when writing a child class dispose method. The answer is the
former. (Thankfully, since VIR_FREE wipes out pointers for safety,
even if I had guessed wrong, I probably would not have tripped over a
double-free fault when the parent dispose ran for the second time). I
also had to read the code to learn if a dispose method was even
mandatory (it is not, although getting NULL through VIR_CLASS_NEW
requires a macro). While at it, the VIR_CLASS_NEW macro requires that
the virObject component at offset 0 be reached through the name
'parent', not 'object'.
Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Erik Skultety <eskultet@redhat.com>
If a device is detached twice from the same domain the following
race condition may happen:
1) The first DetachDevice() call will issue "device_del" on qemu
monitor, but since the DEVICE_DELETED event did not arrive in
time, the API ends claiming "Device detach request sent
successfully".
2) The second DetachDevice() therefore still find the device in
the domain and thus proceeds to detaching it again. It calls
EnterMonitor() and qemuMonitorSend() trying to issue "device_del"
command again. This gets both domain lock and monitor lock
released.
3) At this point, qemu sends us the DEVICE_DELETED event which is
going to be handled by the event loop which ends up calling
qemuDomainSignalDeviceRemoval() to determine who is going to
remove the device from domain definition. Whether it is the
caller that marked the device for removal or whether it is going
to be the event processing thread.
4) Because the device was marked for removal,
qemuDomainSignalDeviceRemoval() returns true, which means the
event is to be processed by the thread that has marked the device
for removal (and is currently still trying to issue "device_del"
command)
5) The thread finally issues the "device_del" command, which
fails (obviously) and therefore it calls
qemuDomainResetDeviceRemoval() to reset the device marking and
quits immediately after, NOT removing any device from the domain
definition.
At this point, the device is still present in the domain
definition but doesn't exist in qemu anymore. Worse, there is no
way to remove it from the domain definition.
Solution is to note down that we've seen the event and if the
second "device_del" fails, not take it as a failure but carry on
with the usual execution.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> ACKed-by: Peter Krempa <pkrempa@redhat.com>
Michal Privoznik [Tue, 12 Mar 2019 12:49:24 +0000 (13:49 +0100)]
qemu_hotplug: Introduce and use qemuDomainDeleteDevice
The aim of this function will be to fix return value of
qemuMonitorDelDevice() in one specific case. But that is yet to
come. Right now this is nothing but a plain substitution.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> ACKed-by: Peter Krempa <pkrempa@redhat.com>
Andrea Bolognani [Thu, 14 Mar 2019 09:14:19 +0000 (10:14 +0100)]
run: Don't export unnecessary paths
We're using virFileFindResourceFull() to locate resources
nowadays, which makes exporting these information in the
environment unnecessary: see
virDriverLoadModule() for LIBVIRT_DRIVER_DIR
virLockManagerPluginNew() for LIBVIRT_LOCK_MANAGER_PLUGIN_DIR
virLockManagerLockDaemonConnectionNew() for VIRTLOCKD_PATH
doRemoteOpen() for LIBVIRTD_PATH
As further proof that we don't need to expose the information
this way anymore, we're not even exporting VIRTLOGD_PATH, which
would be necessary if virLogManagerConnect() didn't already
take care of that for us.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cole Robinson [Thu, 7 Feb 2019 16:29:24 +0000 (11:29 -0500)]
test: storage: Fill in default vol types for every pool
Fill in a default volume type for every pool type, as reported
by the VolGetInfo API. Now that we cover the whole enum, report
an error for invalid values.
Reviewed-by: Andrea Bolognani <abologna@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
Cole Robinson [Wed, 13 Mar 2019 16:07:24 +0000 (12:07 -0400)]
configure: Remove --enable-test-coverage
We provide a custom configure option --enable-test-coverage and
'make cov' target to generate code coverage reports. However gnulib
already provides a 'make coverage' which 'just works' and doesn't
require a special configure option.
This drops our custom implementation in favor of 'make coverage'.
Reports are now output to cov/index.html
Reviewed-by: Martin Kletzander <mkletzan@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
Michal Privoznik [Thu, 14 Mar 2019 12:30:26 +0000 (13:30 +0100)]
virt-driver-qemu.m4: Make qemu driver optional
The basic idea of our configure script is to probe for things
rather than have them enabled by default. This is even more
visible in the next commit where configure fails if qemu driver
is enabled but no yajl is found.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Jiri Denemark <jdenemar@redhat.com>
Michal Privoznik [Wed, 13 Mar 2019 15:36:12 +0000 (16:36 +0100)]
virt-yajl.m4: Drop useless check for qemu
The code tries to detect installed version of qemu to learn if it
uses HMP or QMP and enable YAJL based on that. Well, we support
only QMP and also minimal required version of qemu is 1.5.0 so
the check would have enabled yajl anyway.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
Introduce a simple validation helper to perform the cputune period and
quota checks so that we can get rid of those repetitive chunks. Since
this is a validation helper, this patch also moves the checks from the
'parse' phase into the 'validation' phase.
Signed-off-by: Suyang Chen <dawson0xff@gmail.com> Reviewed-by: Erik Skultety <eskultet@redhat.com>
Andrea Bolognani [Tue, 12 Mar 2019 15:33:05 +0000 (16:33 +0100)]
Don't define abs_* variables ourselves
Apparently this was necessary in the past because old versions
of autoconf/automake didn't make them available, but these
days all of the platforms we target include recent enough
autotools - as evidenced by the fact that, for example, we
already use abs_top_srcdir in tools/ despite the fact that
tools/Makefile.am is missing the same boilerplate.
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
Andrea Bolognani [Tue, 12 Mar 2019 15:31:20 +0000 (16:31 +0100)]
tests: Don't redefine variables for TESTS_ENVIRONMENT
We already have code that defines all abs_* variables at the
top of tests/Makefile.am, so there is no point in redefining
them a second time (using a slightly different shell
incantation to boot).
Signed-off-by: Andrea Bolognani <abologna@redhat.com> Reviewed-by: Martin Kletzander <mkletzan@redhat.com>
projects / libvirt.git / log