The branch from _start to mpentry has to cross a large section of data;
an offset larger than can be specified with a 12-bit branch immediate.
Fix this by converting the branch to an unconditional jump. The gcc
assembler does this conversion silently but it is not done automatically
by clang.
Use the -march and -mabi flags for both gcc and clang as they are
compatible. Specify the "medium" code model separately as it goes by the
name "medany" under gcc, although they are equivalent.
Both clang and gcc development branches have reached version 10. Since we
only parse for a single digit in the major version number, this causes
COMPILER_VERSION to be set to its default of 0.0.0, meaning version checks
fail with these newer compilers.
[rpi] Inherit framebuffer BPP value from the VideoCore firmware
Instead of using hardcoded bpp of 24, obtain current/configured value
from VideoCore. This solves certain problems with Xorg/Qt apps that
require bpp of 32 to work properly. The mode can be forced by setting
framebuffer_depth value in config.txt
PR: 235363
Submitted by: Steve Peurifoy <ssw01@mathistry.net>
fusefs: suppress some Coverity resource leak CIDs in the tests
The fusefs tests deliberately leak file descriptors. To do otherwise would
add extra complications to the tests' mock FUSE server. This annotation
should hopefully convince Coverity to shut up about the leaks.
Reviewed by: uqs
MFC after: 4 days
Sponsored by: The FreeBSD Foundation
Error there mean that command was not even executed, and all information
we have about it is errno, and cam_error_print() call is not very useful.
Plus it is most likely a programmatic error, that shoud not happen.
vm_object_deallocate(): Remove no longer needed code.
We track text mappings explicitly, there is no removal of the text
refs on the object deallocate any more, so tmpfs objects should not be
treated specially. Doing so causes excess deref.
This is a rework of r344701, that noticed that number of bytes passes to
8 bit sector count field gets truncated. First decision was to not pass
anything, since ATA specs define the field as N/A. But it appeared to be a
problem for some SAT devices, that require information about data transfer
to operate properly. Some additional investigation shown that it is quite
a common practice to set unused fields of ATA commands (fortunately ATA
specs formally allow it) to supply the information to SAT layer. I have
found SAS-SATA interposer that does not allow pass-through without it.
As side effect, reduce code duplication by removing ata_do_28bit_cmd()
function, replacing it with more universal ata_do_cmd().
Some newer HID devices have descriptors that are larger than 1k. Bump
this to 2k to prevent them from being truncated and ignored. It
appears to be a sanity check only, but bumping it to 2k allows both of
my iic hid devices to be parsed and the second one to work...
* Buffer overflows. These are all false positives caused by the fact that
Coverity thinks I'm using a buffer to store strings, when in fact I'm
really just using it to store a byte array that happens to be initialized
with a string. I'm changing the type from char to uint8_t in the hopes
that it will placate Coverity. (CID 1404338, 1404350, 1404367, 1404376, 1404379, 1404381, 1404388, 1404403, 1404425, 1404433, 1404434, 1404474, 1404480, 1404484, 1404503, 1404505)
* False positive file descriptor leak. I'm going to try to fix this with
Coverity modeling, but I'll also change an EXPECT to ASSERT so we don't
perform meaningless assertions after the failure. (CID 1404320, 1404324, 1404440, 1404445).
* Uninitialized variables in C++ constructors (CID 1404327, 1404346). In the
case of m_maxphys, this actually led to part of the FUSE_INIT's response
being set to stack garbage during the WriteCluster::clustering test.
* Uninitialized sun_len field in struct sockaddr_un (CID 1404330, 1404371, 1404429).
Reported by: Coverity
Reviewed by: emaste
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21457
CID 1404532 fixes a signed vs unsigned comparison error in fuse_vnop_bmap.
It could potentially have resulted in VOP_BMAP reporting too many
consecutive blocks.
CID 1404364 is much worse. It was an array access by an untrusted,
user-provided variable. It could potentially have resulted in a malicious
file system crashing the kernel or worse.
Reported by: Coverity
Reviewed by: emaste
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21466
We cannot use file (without :T) to name targets
but we can use the destination directory (with / replaced by _)
This has the benefit of minimizing the targets created.
dim [Fri, 6 Sep 2019 16:06:37 +0000 (16:06 +0000)]
Pull in r371111 from upstream llvm trunk (by Eli Friedman):
[IfConversion] Fix diamond conversion with unanalyzable branches.
The code was incorrectly counting the number of identical
instructions, and therefore tried to predicate an instruction which
should not have been predicated. This could have various effects: a
compiler crash, an assembler failure, a miscompile, or just
generating an extra, unnecessary instruction.
Instead of depending on TargetInstrInfo::removeBranch, which only
works on analyzable branches, just remove all branch instructions.
Fixes https://bugs.llvm.org/show_bug.cgi?id=43121 and
https://bugs.llvm.org/show_bug.cgi?id=41121 .
This should fix "Unable to predicate BX killed renamable $r0" errors
when building the lang/spidermonkey170 and lang/spidermonkey38 ports for
armv7 and armv6.
- Add functions for creating and merging sysfs groups.
- Add sysfs_streq function to compare strings ignoring newline from the
sysctl userland call.
- Add a call to sysfs_create_groups in device_add.
- Remove duplicate header include.
- Bump __FreeBSD_version.
This adds the final tweaks to LRO that will now allow me
to add BBR. These changes make it so you can get an
array of timestamps instead of a compressed ack/data segment.
BBR uses this to aid with its delivery estimates. We also
now (via Drew's suggestions) will not go to the expense of
the tcb lookup if no stack registers to want this feature. If
HPTS is not present the feature is not present either and you
just get the compressed behavior.
Add embedded Managed Object Format blob access to acpi_wmi(4).
This blob is can be converted to human readable form by bmfdec.
(http://github.com/pali/bmfdec)
powerpc64/pmap: Fix a WITNESS error in alloc_pvo_entry()
We only call alloc_pvo_entry() with M_WAITOK from one location. However,
this can be called while holding nonsleepable locks. Rather than passing
M_WAITOK down, use vm_wait() and loop.
powerpc64/pmap: Simplify the code path for moea64_pte_replace_native()
Summary:
MOEA64_PTE_REPLACE() is called often with the pmap lock held, and
sometimes with the page pv lock held. The less work done while holding
a lock, the better. Since we are intending to replace the same PTE
(same hash index), we don't need to recalculate anything, just flat
replace the PTE. This cuts more than 200 instructions off the
invalidating code path. In addition, we don't need to replace a PTE
that's not occupied by this PVO.
Loader: Add load offset to powerpc kernel entry point
Summary:
There is logic in ELF loadimage() to relocate kernels, but currently
only type ET_EXEC. PowerPC kernels are ET_DYN, and can be relocated anywhere.
Add the load offset to kernel entry points on this platform.
Reviewed by: imp, ian
Differential Revision: https://reviews.freebsd.org/D21286
Delete the unused "nd" argument for nfsrv_proxyds().
The "nd" argument for nfsrv_proxyds() is no longer used by the function.
This patch deletes it. This allows a subsequent patch to delete the "nd"
argument from nfsvno_getattr(), since it's only use of "nd" was to pass it
to nfsrv_proxyds().
Getting rid of the "nd" argument from nfsvno_getattr() avoids confusion
over why it might need "nd".
This patch is trivial and does not have any semantic effect.
loader: use teken teminal emulator for x86 and uefi
Replace mini cons25 emulator with teken, this does enable us proper console
terminal for loader and will make it possible to implement different
back end callbacks to draw to screen.
cem [Thu, 5 Sep 2019 21:43:33 +0000 (21:43 +0000)]
Remove long-dead BUF_ASSERT_{,UN}HELD assertions
These were fully neutered in r177676 (2008), but not removed at the time for
unclear reasons. They're totally dead code, so go ahead and yank them now.
cem [Thu, 5 Sep 2019 21:30:52 +0000 (21:30 +0000)]
msdosfs: Drop an unneeded brelse in bread error condition
After r294954, it is an invariant that bread returns non-NULL bp if and only
if the routine succeeded. On error, it handles any buffer cleanup
internally. So the brelse(NULL) here was just redundant.
No functional change.
Discussed with: kib (extracted from a larger differential)
Bounds check again after advancing cp, otherwise we have a possible
heap buffer overflow. This was discovered by a Google fuzzer test.
This can lead to remote denial of service. User interaction and
execution privileges are not a prerequisite for exploitation.
Reported by: enh at Google, to FreeBSD by maya@NetBSD.org
Obtained from: enh at Google
See also: NetBSD ns_name.c r1.12
Reviewed by: delphij, ume
MFC after: 3 days
https://android-review.googlesource.com/c/platform/bionic/+/1093130
Differential Revision: https://reviews.freebsd.org/D21523
ian [Thu, 5 Sep 2019 19:17:53 +0000 (19:17 +0000)]
Use a single write of 3 bytes instead of iicdev_writeto() in ads111x.
The iicdev_writeto() function basically does scatter-gather IO by filling
in a pair of iic_msg structs to write the register address then the data
from different locations but with a single bus START/xfer/STOP sequence.
It turns out several low-level i2c controller drivers do not honor the
IIC_NOSTART flag, so the second piece of the write gets a new START on
the bus, and that confuses the ads111x chips which expect a continuous
write of 3 bytes to set a register.
A proper fix for this is to track down all the misbehaving controllers
drivers and fix them. For now this change makes this driver work again.
ian [Thu, 5 Sep 2019 19:07:48 +0000 (19:07 +0000)]
Ensure a measurement is complete before reading the result in ads111x.
Also, disable the comparator by default; it's not used for anything.
The previous logic would start a measurement, and then pause_sbt() for the
averaging time currently configured in the chip. After waiting that long,
the code would blindly read the measurement register and return its value.
The problem is that the chip's idea of averaging time is based on its
internal free-running 1MHz oscillator, which may be running at a wildly
different rate than the kernel clock. If the chip's internal timer was
running slower than the kernel clock, we'd end up grabbing a stale result
from an old measurement.
The driver now still uses pause_sbt() to yield the cpu while waiting for
the measurement to complete, but after sleeping it checks the chip's status
register to ensure the measurement engine is idle. If it's not, the driver
uses a retry loop to wait a bit (5% of the original wait time) then check
again for completion.
r339782 re-enabled acl test 00 and 02, which were disabled in r336617
due to PR 229930.
When the tests were disabled the code to set their required programs was
disabled as well, but this was not reinstated when r339782 re-enabled
them.
Do so now.
adrian [Thu, 5 Sep 2019 15:55:24 +0000 (15:55 +0000)]
[lib80211] add initial VHT (11ac) channel ranges for FCC.
This is a simple set of VHT channels and flags for the FCC (US) regulatory
domain. This needs to be researched and done for the rest of the
regulatory domains, but this should at least unblock some more ath10k
testing.
patch(1): fix the file removal test, strengthen it a bit
To remain compatible with GNU patch, we should ensure that once we're
removing empty files after a reversed /dev/null patch we don't remove files
that have been modified. GNU patch leaves these intact and just reverses the
hunk that created the file, effectively implying --remove-empty-files for
reversed /dev/null patches.
rc: Honor ${name}_env when a custom *_cmd is defined (e.g., start_cmd)
A user may set ${name}_env variable in rc.conf(5) in order to set additional
environment variables for a service command. Unfortunately, at the moment
this variable is only honored when the command is specified via the command
variable. Those additional environment variables coming from ${name}_env
are never set if the service is started via the ${rc_arg}_cmd variable (for
example start_cmd).
manu [Thu, 5 Sep 2019 14:15:47 +0000 (14:15 +0000)]
pkgbase: Create a FreeBSD-utilities package and make it the default one
The default package use to be FreeBSD-runtime but it should only contain
binaries and libs enough to boot to single user and repair the system, it
is also very handy to have a package that can be tranform to a small mfsroot.
So create a new package named FreeBSD-utilities and make it the default one.
Also move a few binaries and lib into this package when it make sense.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21506
manu [Thu, 5 Sep 2019 14:13:08 +0000 (14:13 +0000)]
pkgbase: Put a lot of binaries and lib in FreeBSD-runtime
All of them are needed to be able to boot to single user and be able
to repair a existing FreeBSD installation so put them directly into
FreeBSD-runtime.
manu [Thu, 5 Sep 2019 14:11:16 +0000 (14:11 +0000)]
pkgbase: Put libbluetooth in the bluetooth package
It make sense to have everything bluetooth related in the same package.
Reviewed by: bapt, gjb
Differential Revision: https://reviews.freebsd.org/D21502
Summary:
- basic: test application of patches created by diff -u at the
beginning/middle/end of file, which have differing amounts of context
before and after chunks being added
- limited_ctx: stems from PR 74127 in which a rogue line was getting added
when the patch should have been rejected. Similar behavior was
reproducible with larger contexts near the beginning/end of a file. See
r326084 for details
- file_creation: patch sourced from /dev/null should create the file
- file_nodupe: said patch sourced from /dev/null shouldn't dupe the contents
when re-applied (personal vendetta, WIP, see comment)
- file_removal: this follows from nodupe; the reverse of a patch sourced
from /dev/null is most naturally deleting the file, as is expected based
on GNU patch behavior (WIP)
Delete the unused "nd" argument for nfsrv_checkdsattr().
The "nd" argument for nfsrv_checkdsattr() is no longer used by the function.
This patch deletes it. This allows subsequent patches to delete the "nd"
argument from nfsrv_proxyds(), since it's only use of "nd" was to pass it
to nfsrv_checkdsattr(). The same will then be true for nfsvno_getattr(),
which passes "nd" to nfsrv_proxyds().
Getting rid of the "nd" argument from nfsvno_getattr() avoids confusion
over why it might need "nd".
This patch is trivial and does not have any semantic effect.
Found by inspection while working on the NFSv4.2 server.
Don't free pages in a shadowing object. While this degrades MADV_FREE
to a no-op (and we could, instead, choose to fall back to
MADV_DONTNEED, at the cost of changing pmap_madvise), this is
presently considered a temporary fix. We may prefer to risk a little
fragmentation of the map by creating a zero/OBJT_DEFAULT entry over
top of the existing object and, simultaneously, revert to the existing
marking any pages in the former shadowing object in the advised region
as reclaimable. At least one consumer of MADV_FREE (snmalloc) may use
mmap() to construct zeroed pages "eventually" here anyway, so the
fragmentation may be coming anyway.
>>> 8.6 Doorbell Stride for Software Emulation
>>> The doorbell stride,...is useful in software emulation of an NVM
>>> Express controller. ... For hardware implementations of the NVM
>>> Express interface, the expected doorbell stride value is 0h.
However, hardware in the wild exists with a doorbell stride of 1
(meaning 8 byte separation). This change supports that hardware, as
well as software emulators as envisioned in Section 8.6. Since this is
the fast path, care has been taken to make this computation
efficient. The bit of math to compute an offset for each is replaced
by a memory load from cache of a pre-computed value.
MFC After: 3 days
Reviewed by: scottl@
Differential Revision: https://reviews.freebsd.org/D21514
Currently the code only bumps holdcnt and clears the VI_FREE flag, not
performing actual vhold. Since the vnode is still visible elsewhere, a
potential new user can find it and incorrectly assume it is properly held.
Use vholdl instead to correctly hold the vnode. Another place recycling
(vlrureclaim) does this already.
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21522
Report the Host Buffer Memory minimum and preferred sizes.
The Host Buffer feature (NVMe 1.4 section 89) allows for the NVMe card
request the host provide it buffer for lookaside tables and maybe
other things. Report the card's minimum and preferred sizes with
nvmecontrol/camcontrol identify.
procstat/tests: Fix flakiness by waiting for program to start
Some of the procstat tests start a program "while1" and examine the process
using procstat, but did not wait properly for it to start (kill -0 will
succeed immediately after the child process has been created).
Instead, have "while1" write something when it starts, and use a fifo to
wait for that.
projects / freebsd.git / log