John Ferlan [Thu, 6 Dec 2018 17:32:28 +0000 (12:32 -0500)]
libxl: Use consistent error preservation and restoration calls
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
John Ferlan [Thu, 6 Dec 2018 17:32:18 +0000 (12:32 -0500)]
src: Use consistent error preservation and restoration calls
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
John Ferlan [Thu, 6 Dec 2018 17:32:06 +0000 (12:32 -0500)]
conf: Use consistent error preservation and restoration calls
Provide some consistency over error message variable name and usage
when saving error messages across possible other errors or possibility
of resetting of the last error.
Instead of virSaveLastError paired up with virSetError and virFreeError,
we should use the newer virErrorPreserveLast and virRestoreError.
Signed-off-by: John Ferlan <jferlan@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Laine Stump [Wed, 9 Oct 2019 13:52:25 +0000 (09:52 -0400)]
conf: remove parse code for long-extinct "<state devaddr='d:b:s'/>
Back in July 2009, in the days before libvirt supported explicitly
assigning a PCI address to every device, code was added to save the
PCI addresses of hotplugged network, disk, and hostdevs in the domain
status with this XML element:
Then just a few months later, in November 2009, The code that actually
formatted the "devaddr='blah'" into the status XML was removed by
commit 1b0cce7d3 (which "introduced a standardized data structure for
device addresses"). The code to *parse* the devaddr from the status
was left in for backward compatibility though (it just parses it into
the "standard" PCI address).
At the time the devaddr attribute was added, a few other attributes
already existed in the <state> element for network devices, and these
were removed over time (I haven't checked the exact dates of this),
but 10 years later, in libvirt v5.8.0, we *still* maintain code to
parse <state devaddr='blah'/> from the domain status.
In the meantime, even distros so old that we no longer support them in
upstream libvirt are using a libvirt new enough that it doesn't ever
write <state devaddr='blah'/> to the domain status XML.
Since the only way a current libvirt would ever encounter this element
would be if someone was upgrading directly from libvirt <= v0.7.5 with
running guests, it seems safe to finally remove the code that parses it.
Signed-off-by: Laine Stump <laine@redhat.com> Reviewed-by: Ján Tomko <jtomko@redhat.com>
VIR_AUTOPTR aliases to g_autoptr. Replace all uses of VIR_DEFINE_AUTOPTR_FUNC
with G_DEFINE_AUTOPTR_CLEANUP_FUNC in preparation for replacing the
rest.
Signed-off-by: Ján Tomko <jtomko@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Pavel Mores [Tue, 15 Oct 2019 08:31:22 +0000 (10:31 +0200)]
qemu: fix EFI nvram removal on domain undefine
When undefining a UEFI domain its nvram file has to be properly handled as
well. It's mandatory to use one of --nvram and --keep-nvram options when
'virsh undefine <domain>' is issued for a UEFI domain. To fix the bug as
reported, virsh should return an error message if neither option is used
and the nvram file should be removed when --nvram is given.
The cause of the problem is that when qemuDomainUndefineFlags() is invoked
on an inactive domain the path to its nvram file is empty. This commit
aims to fix this by formatting and filling in the path in time for the
nvram removal code to run properly.
Signed-off-by: Pavel Mores <pmores@redhat.com> Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Michal Privoznik [Wed, 11 Sep 2019 09:19:06 +0000 (11:19 +0200)]
security_stack: Perform rollback if one of stacked drivers fails
In order to have multiple security drivers hidden under one
virSecurity* call, we have virSecurityStack driver which holds a
list of registered security drivers and for every virSecurity*
call it iterates over the list and calls corresponding callback
in real security drivers. For instance, for
virSecurityManagerSetAllLabel() it calls
domainSetSecurityAllLabel callback sequentially in NOP, DAC and
(possibly) SELinux or AppArmor drivers. This works just fine if
the callback from every driver returns success. Problem arises
when one of the drivers fails. For instance, aforementioned
SetAllLabel() succeeds for DAC but fails in SELinux in which
case all files that DAC relabelled are now owned by qemu:qemu (or
whomever runs qemu) and thus permissions are leaked. This is even
more visible with XATTRs which remain set for DAC.
The solution is to perform a rollback on failure, i.e. call
opposite action on drivers that succeeded.
I'm providing rollback only for set calls and intentionally
omitting restore calls for two reasons:
1) restore calls are less likely to fail (they merely remove
XATTRs and chown()/setfilecon() file - all of these operations
succeeded in set call),
2) we are not really interested in restore failures - in a very
few places we check for retval of a restore function we do so
only to print a warning.
Michal Privoznik [Wed, 11 Sep 2019 08:33:19 +0000 (10:33 +0200)]
security_stack: Turn list of nested drivers into a doubly linked list
In near future we will need to walk through the list of internal
drivers in reversed order. The simplest solution is to turn
singly linked list into a doubly linked list.
We will not need to start from the end really, so there's no tail
pointer kept.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Cole Robinson <crobinso@redhat.com>
Michal Privoznik [Wed, 11 Sep 2019 05:53:09 +0000 (07:53 +0200)]
security: Pass @migrated to virSecurityManagerSetAllLabel
In upcoming commits, virSecurityManagerSetAllLabel() will perform
rollback in case of failure by calling
virSecurityManagerRestoreAllLabel(). But in order to do that, the
former needs to have @migrated argument so that it can be passed
to the latter.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Cole Robinson <crobinso@redhat.com>
build: remove use of usleep gnulib module in favour of g_usleep
The usleep function was missing on older mingw versions, but we can rely
on it existing everywhere these days. It may only support times upto 1
second in duration though, so we'll prefer to use g_usleep instead.
The commandhelper program is not changed since that can't link to glib.
Fortunately it doesn't need to build on Windows platforms either.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
which declares the instance & class constructor functions
- Add an impl of the instance & class constructors
wiring up the finalize method to point to our dispose impl
In all files
- Replace VIR_AUTOUNREF(virIdentityPtr) with g_autoptr(virIdentity)
- Replace virObjectRef/Unref with g_object_ref/unref. Note
the latter functions do *NOT* accept a NULL object where as
libvirt's do. If you replace g_object_unref with g_clear_object
it is NULL safe, but also clears the pointer.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
src: add support for g_autoptr with virObject instances
Libvirt currently uses the VIR_AUTOUNREF macro for auto cleanup of
virObject instances. GLib approaches things differently with GObject,
reusing their g_autoptr() concept.
This introduces support for g_autoptr() with virObject, to facilitate
the conversion to GObject.
Only virObject classes which are currently used with VIR_AUTOREF are
updated. Any others should be converted to GObject before introducing
use of autocleanup.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
util: rewrite auto cleanup macros to use glib's equivalent
To facilitate porting over to glib, this rewrites the auto cleanup
macros to use glib's equivalent.
As a result it is now possible to use g_autoptr/VIR_AUTOPTR, and
g_auto/VIR_AUTOCLEAN, g_autofree/VIR_AUTOFREE interchangably, regardless
of which macros were used to declare the cleanup types.
Within the scope of any single method, code must remain consistent
using either GLib or Libvirt macros, never mixing both. New code
must preferentially use the GLib macros, and old code will be
converted incrementally.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
util: use glib string allocation/formatting functions
Convert the string duplication APIs to use the g_strdup family of APIs.
We previously used the 'strdup-posix' gnulib module because mingw does
not set errno to ENOMEM on failure
We previously used the 'strndup' gnulib module because this function
does not exist on mingw.
We previously used the 'vasprintf' gnulib module because of many GNU
supported format specifiers not working on non-Linux platforms. glib's
own equivalent standardizes on GNU format specifiers too.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Convert the VIR_ALLOC family of APIs with use of the g_malloc family of
APIs. Use of VIR_ALLOC related functions should be incrementally phased
out over time, allowing return value checks to be dropped. Use of
VIR_FREE should be replaced with auto-cleanup whenever possible.
We previously used the 'calloc-posix' gnulib module because mingw does
not set errno to ENOMEM on failure.
Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Applications are still encourged to match g_malloc/g_free, but it is no
longer a mandatory requirement for correctness, just stylistic. This is
explicitly clarified in
gmem: clarify that g_malloc always uses the system allocator
Applications can still use custom allocators in general, but they must
do this by linking to a library that replaces the core malloc/free
implemenentation entirely, instead of via a glib specific call.
This means that libvirt does not need to be concerned about use of
g_malloc/g_free causing an ABI change in the public libary, and can
avoid memory copying when talking to external libraries.
This patch probes for glib, which provides the foundation layer with
a collection of data structures, helper APIs, and platform portability
logic.
Later patches will introduce linkage to gobject which provides the
object type system, built on glib, and gio which providing objects
for various interesting tasks, most notably including DBus client
and server support and portable sockets APIs, but much more too.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Cole Robinson [Sat, 5 Oct 2019 23:45:21 +0000 (19:45 -0400)]
security: selinux: Restore image label for externalDataStore
Rename the existing virSecuritySELinuxRestoreImageLabelInt
to virSecuritySELinuxRestoreImageLabelSingle, and extend the new
ImageLabelInt handle externalDataStore
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
Cole Robinson [Sat, 5 Oct 2019 23:47:43 +0000 (19:47 -0400)]
security: dac: Restore image label for externalDataStore
Rename the existing virSecurityDACRestoreImageLabelInt
to virSecurityDACRestoreImageLabelSingle, and extend the new
ImageLabelInt handle externalDataStore
Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Michal Privoznik <mprivozn@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com>
projects / libvirt.git / log